board/freescale/mpc8536ds/mpc8536ds.c - github/trini/u-boot - Gitiles

 /*
  * Copyright 2008 Freescale Semiconductor.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
  * published by the Free Software Foundation; either version 2 of
  * the License, or (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  * MA 02111-1307 USA
  */

 #include <common.h>
 #include <command.h>
 #include <pci.h>
 #include <asm/processor.h>
 #include <asm/mmu.h>
 #include <asm/cache.h>
 #include <asm/immap_85xx.h>
 #include <asm/fsl_pci.h>
 #include <asm/fsl_ddr_sdram.h>
 #include <asm/io.h>
 #include <spd.h>
 #include <miiphy.h>
 #include <libfdt.h>
 #include <spd_sdram.h>
 #include <fdt_support.h>
 #include <tsec.h>
 #include <netdev.h>
 #include <sata.h>

 #include "../common/pixis.h"
 #include "../common/sgmii_riser.h"

 phys_size_t fixed_sdram(void);

 int board_early_init_f (void)
 {
 #ifdef CONFIG_MMC
 	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);

 	setbits_be32(&gur->pmuxcr,
 			(MPC85xx_PMUXCR_SD_DATA |
 			 MPC85xx_PMUXCR_SDHC_CD |
 			 MPC85xx_PMUXCR_SDHC_WP));

 #endif
 	return 0;
 }

 int checkboard (void)
 {
 	printf ("Board: MPC8536DS, System ID: 0x%02x, "
 		"System Version: 0x%02x, FPGA Version: 0x%02x\n",
 		in8(PIXIS_BASE + PIXIS_ID), in8(PIXIS_BASE + PIXIS_VER),
 		in8(PIXIS_BASE + PIXIS_PVER));
 	return 0;
 }

 phys_size_t
 initdram(int board_type)
 {
 	phys_size_t dram_size = 0;

 	puts("Initializing....");

 #ifdef CONFIG_SPD_EEPROM
 	dram_size = fsl_ddr_sdram();
 #else
 	dram_size = fixed_sdram();
 #endif
 	dram_size = setup_ddr_tlbs(dram_size / 0x100000);
 	dram_size *= 0x100000;

 	puts("    DDR: ");
 	return dram_size;
 }

 #if !defined(CONFIG_SPD_EEPROM)
 /*
  * Fixed sdram init -- doesn't use serial presence detect.
  */

 phys_size_t fixed_sdram (void)
 {
 	volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
 	volatile ccsr_ddr_t *ddr= &immap->im_ddr;
 	uint d_init;

 	ddr->cs0_bnds = CONFIG_SYS_DDR_CS0_BNDS;
 	ddr->cs0_config = CONFIG_SYS_DDR_CS0_CONFIG;

 	ddr->timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3;
 	ddr->timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0;
 	ddr->timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1;
 	ddr->timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2;
 	ddr->sdram_mode = CONFIG_SYS_DDR_MODE_1;
 	ddr->sdram_mode_2 = CONFIG_SYS_DDR_MODE_2;
 	ddr->sdram_interval = CONFIG_SYS_DDR_INTERVAL;
 	ddr->sdram_data_init = CONFIG_SYS_DDR_DATA_INIT;
 	ddr->sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL;
 	ddr->sdram_cfg_2 = CONFIG_SYS_DDR_CONTROL2;

 #if defined (CONFIG_DDR_ECC)
 	ddr->err_int_en = CONFIG_SYS_DDR_ERR_INT_EN;
 	ddr->err_disable = CONFIG_SYS_DDR_ERR_DIS;
 	ddr->err_sbe = CONFIG_SYS_DDR_SBE;
 #endif
 	asm("sync;isync");

 	udelay(500);

 	ddr->sdram_cfg = CONFIG_SYS_DDR_CONTROL;

 #if defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
 	d_init = 1;
 	debug("DDR - 1st controller: memory initializing\n");
 	/*
 	 * Poll until memory is initialized.
 	 * 512 Meg at 400 might hit this 200 times or so.
 	 */
 	while ((ddr->sdram_cfg_2 & (d_init << 4)) != 0) {
 		udelay(1000);
 	}
 	debug("DDR: memory initialized\n\n");
 	asm("sync; isync");
 	udelay(500);
 #endif

 	return 512 * 1024 * 1024;
 }

 #endif

 #ifdef CONFIG_PCI1
 static struct pci_controller pci1_hose;
 #endif

 #ifdef CONFIG_PCIE1
 static struct pci_controller pcie1_hose;
 #endif

 #ifdef CONFIG_PCIE2
 static struct pci_controller pcie2_hose;
 #endif

 #ifdef CONFIG_PCIE3
 static struct pci_controller pcie3_hose;
 #endif

 int first_free_busno=0;

 void
 pci_init_board(void)
 {
 	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
 	uint devdisr = gur->devdisr;
 	uint sdrs2_io_sel =
 		(gur->pordevsr & MPC85xx_PORDEVSR_SRDS2_IO_SEL) >> 27;
 	uint io_sel = (gur->pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19;
 	uint host_agent = (gur->porbmsr & MPC85xx_PORBMSR_HA) >> 16;

 	debug("   pci_init_board: devdisr=%x, sdrs2_io_sel=%x, io_sel=%x,\
 		host_agent=%x\n", devdisr, sdrs2_io_sel, io_sel, host_agent);

 	if (sdrs2_io_sel == 7)
 		printf("    Serdes2 disalbed\n");
 	else if (sdrs2_io_sel == 4) {
 		printf("    eTSEC1 is in sgmii mode.\n");
 		printf("    eTSEC3 is in sgmii mode.\n");
 	} else if (sdrs2_io_sel == 6)
 		printf("    eTSEC1 is in sgmii mode.\n");

 #ifdef CONFIG_PCIE3
 {
 	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE3_ADDR;
 	struct pci_controller *hose = &pcie3_hose;
 	int pcie_ep = (host_agent == 1);
 	int pcie_configured  = (io_sel == 7);
 	struct pci_region *r = hose->regions;

 	if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
 		printf ("\n    PCIE3 connected to Slot3 as %s (base address %x)",
 			pcie_ep ? "End Point" : "Root Complex",
 			(uint)pci);
 		if (pci->pme_msg_det) {
 			pci->pme_msg_det = 0xffffffff;
 			debug (" with errors.  Clearing.  Now 0x%08x",pci->pme_msg_det);
 		}
 		printf ("\n");

 		/* inbound */
 		r += fsl_pci_setup_inbound_windows(r);

 		/* outbound memory */
 		pci_set_region(r++,
 			       CONFIG_SYS_PCIE3_MEM_BUS,
 			       CONFIG_SYS_PCIE3_MEM_PHYS,
 			       CONFIG_SYS_PCIE3_MEM_SIZE,
 			       PCI_REGION_MEM);

 		/* outbound io */
 		pci_set_region(r++,
 			       CONFIG_SYS_PCIE3_IO_BUS,
 			       CONFIG_SYS_PCIE3_IO_PHYS,
 			       CONFIG_SYS_PCIE3_IO_SIZE,
 			       PCI_REGION_IO);

 		hose->region_count = r - hose->regions;

 		hose->first_busno=first_free_busno;
 		pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data);

 		fsl_pci_init(hose);

 		first_free_busno=hose->last_busno+1;
 		printf ("    PCIE3 on bus %02x - %02x\n",
 			hose->first_busno,hose->last_busno);
 	} else {
 		printf ("    PCIE3: disabled\n");
 	}

  }
 #else
 	gur->devdisr |= MPC85xx_DEVDISR_PCIE3; /* disable */
 #endif

 #ifdef CONFIG_PCIE1
  {
 	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE1_ADDR;
 	struct pci_controller *hose = &pcie1_hose;
 	int pcie_ep = (host_agent == 5);
 	int pcie_configured  = (io_sel == 2 || io_sel == 3
 				|| io_sel == 5 || io_sel == 7);
 	struct pci_region *r = hose->regions;

 	if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
 		printf ("\n    PCIE1 connected to Slot1 as %s (base address %x)",
 			pcie_ep ? "End Point" : "Root Complex",
 			(uint)pci);
 		if (pci->pme_msg_det) {
 			pci->pme_msg_det = 0xffffffff;
 			debug (" with errors.  Clearing.  Now 0x%08x",pci->pme_msg_det);
 		}
 		printf ("\n");

 		/* inbound */
 		r += fsl_pci_setup_inbound_windows(r);

 		/* outbound memory */
 		pci_set_region(r++,
 			       CONFIG_SYS_PCIE1_MEM_BUS,
 			       CONFIG_SYS_PCIE1_MEM_PHYS,
 			       CONFIG_SYS_PCIE1_MEM_SIZE,
 			       PCI_REGION_MEM);

 		/* outbound io */
 		pci_set_region(r++,
 			       CONFIG_SYS_PCIE1_IO_BUS,
 			       CONFIG_SYS_PCIE1_IO_PHYS,
 			       CONFIG_SYS_PCIE1_IO_SIZE,
 			       PCI_REGION_IO);

 #ifdef CONFIG_SYS_PCIE1_MEM_BUS2
 		/* outbound memory */
 		pci_set_region(r++,
 			       CONFIG_SYS_PCIE1_MEM_BUS2,
 			       CONFIG_SYS_PCIE1_MEM_PHYS2,
 			       CONFIG_SYS_PCIE1_MEM_SIZE2,
 			       PCI_REGION_MEM);
 #endif
 		hose->region_count = r - hose->regions;
 		hose->first_busno=first_free_busno;

 		pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data);

 		fsl_pci_init(hose);

 		first_free_busno=hose->last_busno+1;
 		printf("    PCIE1 on bus %02x - %02x\n",
 		       hose->first_busno,hose->last_busno);

 	} else {
 		printf ("    PCIE1: disabled\n");
 	}

  }
 #else
 	gur->devdisr |= MPC85xx_DEVDISR_PCIE; /* disable */
 #endif

 #ifdef CONFIG_PCIE2
  {
 	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE2_ADDR;
 	struct pci_controller *hose = &pcie2_hose;
 	int pcie_ep = (host_agent == 3);
 	int pcie_configured  = (io_sel == 5 || io_sel == 7);
 	struct pci_region *r = hose->regions;

 	if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
 		printf ("\n    PCIE2 connected to Slot 2 as %s (base address %x)",
 			pcie_ep ? "End Point" : "Root Complex",
 			(uint)pci);
 		if (pci->pme_msg_det) {
 			pci->pme_msg_det = 0xffffffff;
 			debug (" with errors.  Clearing.  Now 0x%08x",pci->pme_msg_det);
 		}
 		printf ("\n");

 		/* inbound */
 		r += fsl_pci_setup_inbound_windows(r);

 		/* outbound memory */
 		pci_set_region(r++,
 			       CONFIG_SYS_PCIE2_MEM_BUS,
 			       CONFIG_SYS_PCIE2_MEM_PHYS,
 			       CONFIG_SYS_PCIE2_MEM_SIZE,
 			       PCI_REGION_MEM);

 		/* outbound io */
 		pci_set_region(r++,
 			       CONFIG_SYS_PCIE2_IO_BUS,
 			       CONFIG_SYS_PCIE2_IO_PHYS,
 			       CONFIG_SYS_PCIE2_IO_SIZE,
 			       PCI_REGION_IO);

 #ifdef CONFIG_SYS_PCIE2_MEM_BUS2
 		/* outbound memory */
 		pci_set_region(r++,
 			       CONFIG_SYS_PCIE2_MEM_BUS2,
 			       CONFIG_SYS_PCIE2_MEM_PHYS2,
 			       CONFIG_SYS_PCIE2_MEM_SIZE2,
 			       PCI_REGION_MEM);
 #endif
 		hose->region_count = r - hose->regions;
 		hose->first_busno=first_free_busno;
 		pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data);

 		fsl_pci_init(hose);
 		first_free_busno=hose->last_busno+1;
 		printf ("    PCIE2 on bus %02x - %02x\n",
 			hose->first_busno,hose->last_busno);

 	} else {
 		printf ("    PCIE2: disabled\n");
 	}

  }
 #else
 	gur->devdisr |= MPC85xx_DEVDISR_PCIE2; /* disable */
 #endif


 #ifdef CONFIG_PCI1
 {
 	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCI1_ADDR;
 	struct pci_controller *hose = &pci1_hose;
 	struct pci_region *r = hose->regions;

 	uint pci_agent = (host_agent == 6);
 	uint pci_speed = 66666000; /*get_clock_freq (); PCI PSPEED in [4:5] */
 	uint pci_32 = 1;
 	uint pci_arb = gur->pordevsr & MPC85xx_PORDEVSR_PCI1_ARB;	/* PORDEVSR[14] */
 	uint pci_clk_sel = gur->porpllsr & MPC85xx_PORDEVSR_PCI1_SPD;	/* PORPLLSR[16] */


 	if (!(devdisr & MPC85xx_DEVDISR_PCI1)) {
 		printf ("\n    PCI: %d bit, %s MHz, %s, %s, %s (base address %x)\n",
 			(pci_32) ? 32 : 64,
 			(pci_speed == 33333000) ? "33" :
 			(pci_speed == 66666000) ? "66" : "unknown",
 			pci_clk_sel ? "sync" : "async",
 			pci_agent ? "agent" : "host",
 			pci_arb ? "arbiter" : "external-arbiter",
 			(uint)pci
 			);

 		/* inbound */
 		r += fsl_pci_setup_inbound_windows(r);

 		/* outbound memory */
 		pci_set_region(r++,
 			       CONFIG_SYS_PCI1_MEM_BUS,
 			       CONFIG_SYS_PCI1_MEM_PHYS,
 			       CONFIG_SYS_PCI1_MEM_SIZE,
 			       PCI_REGION_MEM);

 		/* outbound io */
 		pci_set_region(r++,
 			       CONFIG_SYS_PCI1_IO_BUS,
 			       CONFIG_SYS_PCI1_IO_PHYS,
 			       CONFIG_SYS_PCI1_IO_SIZE,
 			       PCI_REGION_IO);

 #ifdef CONFIG_SYS_PCI1_MEM_BUS2
 		/* outbound memory */
 		pci_set_region(r++,
 			       CONFIG_SYS_PCI1_MEM_BUS2,
 			       CONFIG_SYS_PCI1_MEM_PHYS2,
 			       CONFIG_SYS_PCI1_MEM_SIZE2,
 			       PCI_REGION_MEM);
 #endif
 		hose->region_count = r - hose->regions;
 		hose->first_busno=first_free_busno;
 		pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data);

 		fsl_pci_init(hose);
 		first_free_busno=hose->last_busno+1;
 		printf ("PCI on bus %02x - %02x\n",
 			hose->first_busno,hose->last_busno);
 	} else {
 		printf ("    PCI: disabled\n");
 	}
 }
 #else
 	gur->devdisr |= MPC85xx_DEVDISR_PCI1; /* disable */
 #endif
 }


 int board_early_init_r(void)
 {
 	const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
 	const u8 flash_esel = 1;

 	/*
 	 * Remap Boot flash + PROMJET region to caching-inhibited
 	 * so that flash can be erased properly.
 	 */

 	/* Flush d-cache and invalidate i-cache of any FLASH data */
 	flush_dcache();
 	invalidate_icache();

 	/* invalidate existing TLB entry for flash + promjet */
 	disable_tlb(flash_esel);

 	set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS,	/* tlb, epn, rpn */
 		MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,	/* perms, wimge */
 		0, flash_esel, BOOKE_PAGESZ_256M, 1);	/* ts, esel, tsize, iprot */

 	return 0;
 }

 #ifdef CONFIG_GET_CLK_FROM_ICS307
 /* decode S[0-2] to Output Divider (OD) */
 static unsigned char
 ics307_S_to_OD[] = {
 	10, 2, 8, 4, 5, 7, 3, 6
 };

 /* Calculate frequency being generated by ICS307-02 clock chip based upon
  * the control bytes being programmed into it. */
 /* XXX: This function should probably go into a common library */
 static unsigned long
 ics307_clk_freq (unsigned char cw0, unsigned char cw1, unsigned char cw2)
 {
 	const unsigned long long InputFrequency = CONFIG_ICS307_REFCLK_HZ;
 	unsigned long VDW = ((cw1 << 1) & 0x1FE) + ((cw2 >> 7) & 1);
 	unsigned long RDW = cw2 & 0x7F;
 	unsigned long OD = ics307_S_to_OD[cw0 & 0x7];
 	unsigned long freq;

 	/* CLK1Frequency = InputFrequency * 2 * (VDW + 8) / ((RDW + 2) * OD) */

 	/* cw0:  C1 C0 TTL F1 F0 S2 S1 S0
 	 * cw1:  V8 V7 V6 V5 V4 V3 V2 V1
 	 * cw2:  V0 R6 R5 R4 R3 R2 R1 R0
 	 *
 	 * R6:R0 = Reference Divider Word (RDW)
 	 * V8:V0 = VCO Divider Word (VDW)
 	 * S2:S0 = Output Divider Select (OD)
 	 * F1:F0 = Function of CLK2 Output
 	 * TTL = duty cycle
 	 * C1:C0 = internal load capacitance for cyrstal
 	 */

 	/* Adding 1 to get a "nicely" rounded number, but this needs
 	 * more tweaking to get a "properly" rounded number. */

 	freq = 1 + (InputFrequency * 2 * (VDW + 8) / ((RDW + 2) * OD));

 	debug("ICS307: CW[0-2]: %02X %02X %02X => %u Hz\n", cw0, cw1, cw2,
 		freq);
 	return freq;
 }

 unsigned long
 get_board_sys_clk(ulong dummy)
 {
 	return ics307_clk_freq (
 	    in8(PIXIS_BASE + PIXIS_VSYSCLK0),
 	    in8(PIXIS_BASE + PIXIS_VSYSCLK1),
 	    in8(PIXIS_BASE + PIXIS_VSYSCLK2)
 	);
 }

 unsigned long
 get_board_ddr_clk(ulong dummy)
 {
 	return ics307_clk_freq (
 	    in8(PIXIS_BASE + PIXIS_VDDRCLK0),
 	    in8(PIXIS_BASE + PIXIS_VDDRCLK1),
 	    in8(PIXIS_BASE + PIXIS_VDDRCLK2)
 	);
 }
 #else
 unsigned long
 get_board_sys_clk(ulong dummy)
 {
 	u8 i;
 	ulong val = 0;

 	i = in8(PIXIS_BASE + PIXIS_SPD);
 	i &= 0x07;

 	switch (i) {
 	case 0:
 		val = 33333333;
 		break;
 	case 1:
 		val = 40000000;
 		break;
 	case 2:
 		val = 50000000;
 		break;
 	case 3:
 		val = 66666666;
 		break;
 	case 4:
 		val = 83333333;
 		break;
 	case 5:
 		val = 100000000;
 		break;
 	case 6:
 		val = 133333333;
 		break;
 	case 7:
 		val = 166666666;
 		break;
 	}

 	return val;
 }

 unsigned long
 get_board_ddr_clk(ulong dummy)
 {
 	u8 i;
 	ulong val = 0;

 	i = in8(PIXIS_BASE + PIXIS_SPD);
 	i &= 0x38;
 	i >>= 3;

 	switch (i) {
 	case 0:
 		val = 33333333;
 		break;
 	case 1:
 		val = 40000000;
 		break;
 	case 2:
 		val = 50000000;
 		break;
 	case 3:
 		val = 66666666;
 		break;
 	case 4:
 		val = 83333333;
 		break;
 	case 5:
 		val = 100000000;
 		break;
 	case 6:
 		val = 133333333;
 		break;
 	case 7:
 		val = 166666666;
 		break;
 	}
 	return val;
 }
 #endif

 int sata_initialize(void)
 {
 	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
 	uint sdrs2_io_sel =
 		(gur->pordevsr & MPC85xx_PORDEVSR_SRDS2_IO_SEL) >> 27;
 	if (sdrs2_io_sel & 0x04)
 		return 1;

 	return __sata_initialize();
 }

 int board_eth_init(bd_t *bis)
 {
 #ifdef CONFIG_TSEC_ENET
 	struct tsec_info_struct tsec_info[2];
 	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
 	int num = 0;
 	uint sdrs2_io_sel =
 		(gur->pordevsr & MPC85xx_PORDEVSR_SRDS2_IO_SEL) >> 27;

 #ifdef CONFIG_TSEC1
 	SET_STD_TSEC_INFO(tsec_info[num], 1);
 	if ((sdrs2_io_sel == 4) || (sdrs2_io_sel == 6)) {
 		tsec_info[num].phyaddr = 0;
 		tsec_info[num].flags |= TSEC_SGMII;
 	}
 	num++;
 #endif
 #ifdef CONFIG_TSEC3
 	SET_STD_TSEC_INFO(tsec_info[num], 3);
 	if (sdrs2_io_sel == 4) {
 		tsec_info[num].phyaddr = 1;
 		tsec_info[num].flags |= TSEC_SGMII;
 	}
 	num++;
 #endif

 	if (!num) {
 		printf("No TSECs initialized\n");
 		return 0;
 	}

 #ifdef CONFIG_FSL_SGMII_RISER
 	if ((sdrs2_io_sel == 4) || (sdrs2_io_sel == 6))
 		fsl_sgmii_riser_init(tsec_info, num);
 #endif

 	tsec_eth_init(bis, tsec_info, num);
 #endif
 	return pci_eth_init(bis);
 }

 #if defined(CONFIG_OF_BOARD_SETUP)
 void ft_board_setup(void *blob, bd_t *bd)
 {
 	ft_cpu_setup(blob, bd);

 #ifdef CONFIG_PCI1
 	ft_fsl_pci_setup(blob, "pci0", &pci1_hose);
 #endif
 #ifdef CONFIG_PCIE2
 	ft_fsl_pci_setup(blob, "pci1", &pcie2_hose);
 #endif
 #ifdef CONFIG_PCIE2
 	ft_fsl_pci_setup(blob, "pci2", &pcie1_hose);
 #endif
 #ifdef CONFIG_PCIE1
 	ft_fsl_pci_setup(blob, "pci3", &pcie3_hose);
 #endif
 #ifdef CONFIG_FSL_SGMII_RISER
 	fsl_sgmii_riser_fdt_fixup(blob);
 #endif
 }
 #endif
	/*
	* Copyright 2008 Freescale Semiconductor.
	*
	* See file CREDITS for list of people who contributed to this
	* project.
	*
	* This program is free software; you can redistribute it and/or
	* modify it under the terms of the GNU General Public License as
	* published by the Free Software Foundation; either version 2 of
	* the License, or (at your option) any later version.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; if not, write to the Free Software
	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	* MA 02111-1307 USA
	*/

	#include <common.h>
	#include <command.h>
	#include <pci.h>
	#include <asm/processor.h>
	#include <asm/mmu.h>
	#include <asm/cache.h>
	#include <asm/immap_85xx.h>
	#include <asm/fsl_pci.h>
	#include <asm/fsl_ddr_sdram.h>
	#include <asm/io.h>
	#include <spd.h>
	#include <miiphy.h>
	#include <libfdt.h>
	#include <spd_sdram.h>
	#include <fdt_support.h>
	#include <tsec.h>
	#include <netdev.h>
	#include <sata.h>

	#include "../common/pixis.h"
	#include "../common/sgmii_riser.h"

	phys_size_t fixed_sdram(void);

	int board_early_init_f (void)
	{
	#ifdef CONFIG_MMC
	volatile ccsr_gur_t gur = (void )(CONFIG_SYS_MPC85xx_GUTS_ADDR);

	setbits_be32(&gur->pmuxcr,
	(MPC85xx_PMUXCR_SD_DATA \|
	MPC85xx_PMUXCR_SDHC_CD \|
	MPC85xx_PMUXCR_SDHC_WP));

	#endif
	return 0;
	}

	int checkboard (void)
	{
	printf ("Board: MPC8536DS, System ID: 0x%02x, "
	"System Version: 0x%02x, FPGA Version: 0x%02x\n",
	in8(PIXIS_BASE + PIXIS_ID), in8(PIXIS_BASE + PIXIS_VER),
	in8(PIXIS_BASE + PIXIS_PVER));
	return 0;
	}

	phys_size_t
	initdram(int board_type)
	{
	phys_size_t dram_size = 0;

	puts("Initializing....");

	#ifdef CONFIG_SPD_EEPROM
	dram_size = fsl_ddr_sdram();
	#else
	dram_size = fixed_sdram();
	#endif
	dram_size = setup_ddr_tlbs(dram_size / 0x100000);
	dram_size *= 0x100000;

	puts(" DDR: ");
	return dram_size;
	}

	#if !defined(CONFIG_SPD_EEPROM)
	/*
	* Fixed sdram init -- doesn't use serial presence detect.
	*/

	phys_size_t fixed_sdram (void)
	{
	volatile immap_t immap = (immap_t )CONFIG_SYS_IMMR;
	volatile ccsr_ddr_t *ddr= &immap->im_ddr;
	uint d_init;

	ddr->cs0_bnds = CONFIG_SYS_DDR_CS0_BNDS;
	ddr->cs0_config = CONFIG_SYS_DDR_CS0_CONFIG;

	ddr->timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3;
	ddr->timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0;
	ddr->timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1;
	ddr->timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2;
	ddr->sdram_mode = CONFIG_SYS_DDR_MODE_1;
	ddr->sdram_mode_2 = CONFIG_SYS_DDR_MODE_2;
	ddr->sdram_interval = CONFIG_SYS_DDR_INTERVAL;
	ddr->sdram_data_init = CONFIG_SYS_DDR_DATA_INIT;
	ddr->sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL;
	ddr->sdram_cfg_2 = CONFIG_SYS_DDR_CONTROL2;

	#if defined (CONFIG_DDR_ECC)
	ddr->err_int_en = CONFIG_SYS_DDR_ERR_INT_EN;
	ddr->err_disable = CONFIG_SYS_DDR_ERR_DIS;
	ddr->err_sbe = CONFIG_SYS_DDR_SBE;
	#endif
	asm("sync;isync");

	udelay(500);

	ddr->sdram_cfg = CONFIG_SYS_DDR_CONTROL;

	#if defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
	d_init = 1;
	debug("DDR - 1st controller: memory initializing\n");
	/*
	* Poll until memory is initialized.
	* 512 Meg at 400 might hit this 200 times or so.
	*/
	while ((ddr->sdram_cfg_2 & (d_init << 4)) != 0) {
	udelay(1000);
	}
	debug("DDR: memory initialized\n\n");
	asm("sync; isync");
	udelay(500);
	#endif

	return 512 * 1024 * 1024;
	}

	#endif

	#ifdef CONFIG_PCI1
	static struct pci_controller pci1_hose;
	#endif

	#ifdef CONFIG_PCIE1
	static struct pci_controller pcie1_hose;
	#endif

	#ifdef CONFIG_PCIE2
	static struct pci_controller pcie2_hose;
	#endif

	#ifdef CONFIG_PCIE3
	static struct pci_controller pcie3_hose;
	#endif

	int first_free_busno=0;

	void
	pci_init_board(void)
	{
	volatile ccsr_gur_t gur = (void )(CONFIG_SYS_MPC85xx_GUTS_ADDR);
	uint devdisr = gur->devdisr;
	uint sdrs2_io_sel =
	(gur->pordevsr & MPC85xx_PORDEVSR_SRDS2_IO_SEL) >> 27;
	uint io_sel = (gur->pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19;
	uint host_agent = (gur->porbmsr & MPC85xx_PORBMSR_HA) >> 16;

	debug(" pci_init_board: devdisr=%x, sdrs2_io_sel=%x, io_sel=%x,\
	host_agent=%x\n", devdisr, sdrs2_io_sel, io_sel, host_agent);

	if (sdrs2_io_sel == 7)
	printf(" Serdes2 disalbed\n");
	else if (sdrs2_io_sel == 4) {
	printf(" eTSEC1 is in sgmii mode.\n");
	printf(" eTSEC3 is in sgmii mode.\n");
	} else if (sdrs2_io_sel == 6)
	printf(" eTSEC1 is in sgmii mode.\n");

	#ifdef CONFIG_PCIE3
	{
	volatile ccsr_fsl_pci_t pci = (ccsr_fsl_pci_t ) CONFIG_SYS_PCIE3_ADDR;
	struct pci_controller *hose = &pcie3_hose;
	int pcie_ep = (host_agent == 1);
	int pcie_configured = (io_sel == 7);
	struct pci_region *r = hose->regions;

	if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
	printf ("\n PCIE3 connected to Slot3 as %s (base address %x)",
	pcie_ep ? "End Point" : "Root Complex",
	(uint)pci);
	if (pci->pme_msg_det) {
	pci->pme_msg_det = 0xffffffff;
	debug (" with errors. Clearing. Now 0x%08x",pci->pme_msg_det);
	}
	printf ("\n");

	/* inbound */
	r += fsl_pci_setup_inbound_windows(r);

	/* outbound memory */
	pci_set_region(r++,
	CONFIG_SYS_PCIE3_MEM_BUS,
	CONFIG_SYS_PCIE3_MEM_PHYS,
	CONFIG_SYS_PCIE3_MEM_SIZE,
	PCI_REGION_MEM);

	/* outbound io */
	pci_set_region(r++,
	CONFIG_SYS_PCIE3_IO_BUS,
	CONFIG_SYS_PCIE3_IO_PHYS,
	CONFIG_SYS_PCIE3_IO_SIZE,
	PCI_REGION_IO);

	hose->region_count = r - hose->regions;

	hose->first_busno=first_free_busno;
	pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data);

	fsl_pci_init(hose);

	first_free_busno=hose->last_busno+1;
	printf (" PCIE3 on bus %02x - %02x\n",
	hose->first_busno,hose->last_busno);
	} else {
	printf (" PCIE3: disabled\n");
	}

	}
	#else
	gur->devdisr \|= MPC85xx_DEVDISR_PCIE3; /* disable */
	#endif

	#ifdef CONFIG_PCIE1
	{
	volatile ccsr_fsl_pci_t pci = (ccsr_fsl_pci_t ) CONFIG_SYS_PCIE1_ADDR;
	struct pci_controller *hose = &pcie1_hose;
	int pcie_ep = (host_agent == 5);
	int pcie_configured = (io_sel == 2 \|\| io_sel == 3
	\|\| io_sel == 5 \|\| io_sel == 7);
	struct pci_region *r = hose->regions;

	if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
	printf ("\n PCIE1 connected to Slot1 as %s (base address %x)",
	pcie_ep ? "End Point" : "Root Complex",
	(uint)pci);
	if (pci->pme_msg_det) {
	pci->pme_msg_det = 0xffffffff;
	debug (" with errors. Clearing. Now 0x%08x",pci->pme_msg_det);
	}
	printf ("\n");

	/* inbound */
	r += fsl_pci_setup_inbound_windows(r);

	/* outbound memory */
	pci_set_region(r++,
	CONFIG_SYS_PCIE1_MEM_BUS,
	CONFIG_SYS_PCIE1_MEM_PHYS,
	CONFIG_SYS_PCIE1_MEM_SIZE,
	PCI_REGION_MEM);

	/* outbound io */
	pci_set_region(r++,
	CONFIG_SYS_PCIE1_IO_BUS,
	CONFIG_SYS_PCIE1_IO_PHYS,
	CONFIG_SYS_PCIE1_IO_SIZE,
	PCI_REGION_IO);

	#ifdef CONFIG_SYS_PCIE1_MEM_BUS2
	/* outbound memory */
	pci_set_region(r++,
	CONFIG_SYS_PCIE1_MEM_BUS2,
	CONFIG_SYS_PCIE1_MEM_PHYS2,
	CONFIG_SYS_PCIE1_MEM_SIZE2,
	PCI_REGION_MEM);
	#endif
	hose->region_count = r - hose->regions;
	hose->first_busno=first_free_busno;

	pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data);

	fsl_pci_init(hose);

	first_free_busno=hose->last_busno+1;
	printf(" PCIE1 on bus %02x - %02x\n",
	hose->first_busno,hose->last_busno);

	} else {
	printf (" PCIE1: disabled\n");
	}

	}
	#else
	gur->devdisr \|= MPC85xx_DEVDISR_PCIE; /* disable */
	#endif

	#ifdef CONFIG_PCIE2
	{
	volatile ccsr_fsl_pci_t pci = (ccsr_fsl_pci_t ) CONFIG_SYS_PCIE2_ADDR;
	struct pci_controller *hose = &pcie2_hose;
	int pcie_ep = (host_agent == 3);
	int pcie_configured = (io_sel == 5 \|\| io_sel == 7);
	struct pci_region *r = hose->regions;

	if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
	printf ("\n PCIE2 connected to Slot 2 as %s (base address %x)",
	pcie_ep ? "End Point" : "Root Complex",
	(uint)pci);
	if (pci->pme_msg_det) {
	pci->pme_msg_det = 0xffffffff;
	debug (" with errors. Clearing. Now 0x%08x",pci->pme_msg_det);
	}
	printf ("\n");

	/* inbound */
	r += fsl_pci_setup_inbound_windows(r);

	/* outbound memory */
	pci_set_region(r++,
	CONFIG_SYS_PCIE2_MEM_BUS,
	CONFIG_SYS_PCIE2_MEM_PHYS,
	CONFIG_SYS_PCIE2_MEM_SIZE,
	PCI_REGION_MEM);

	/* outbound io */
	pci_set_region(r++,
	CONFIG_SYS_PCIE2_IO_BUS,
	CONFIG_SYS_PCIE2_IO_PHYS,
	CONFIG_SYS_PCIE2_IO_SIZE,
	PCI_REGION_IO);

	#ifdef CONFIG_SYS_PCIE2_MEM_BUS2
	/* outbound memory */
	pci_set_region(r++,
	CONFIG_SYS_PCIE2_MEM_BUS2,
	CONFIG_SYS_PCIE2_MEM_PHYS2,
	CONFIG_SYS_PCIE2_MEM_SIZE2,
	PCI_REGION_MEM);
	#endif
	hose->region_count = r - hose->regions;
	hose->first_busno=first_free_busno;
	pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data);

	fsl_pci_init(hose);
	first_free_busno=hose->last_busno+1;
	printf (" PCIE2 on bus %02x - %02x\n",
	hose->first_busno,hose->last_busno);

	} else {
	printf (" PCIE2: disabled\n");
	}

	}
	#else
	gur->devdisr \|= MPC85xx_DEVDISR_PCIE2; /* disable */
	#endif


	#ifdef CONFIG_PCI1
	{
	volatile ccsr_fsl_pci_t pci = (ccsr_fsl_pci_t ) CONFIG_SYS_PCI1_ADDR;
	struct pci_controller *hose = &pci1_hose;
	struct pci_region *r = hose->regions;

	uint pci_agent = (host_agent == 6);
	uint pci_speed = 66666000; /get_clock_freq (); PCI PSPEED in [4:5] /
	uint pci_32 = 1;
	uint pci_arb = gur->pordevsr & MPC85xx_PORDEVSR_PCI1_ARB; /* PORDEVSR[14] */
	uint pci_clk_sel = gur->porpllsr & MPC85xx_PORDEVSR_PCI1_SPD; /* PORPLLSR[16] */


	if (!(devdisr & MPC85xx_DEVDISR_PCI1)) {
	printf ("\n PCI: %d bit, %s MHz, %s, %s, %s (base address %x)\n",
	(pci_32) ? 32 : 64,
	(pci_speed == 33333000) ? "33" :
	(pci_speed == 66666000) ? "66" : "unknown",
	pci_clk_sel ? "sync" : "async",
	pci_agent ? "agent" : "host",
	pci_arb ? "arbiter" : "external-arbiter",
	(uint)pci
	);

	/* inbound */
	r += fsl_pci_setup_inbound_windows(r);

	/* outbound memory */
	pci_set_region(r++,
	CONFIG_SYS_PCI1_MEM_BUS,
	CONFIG_SYS_PCI1_MEM_PHYS,
	CONFIG_SYS_PCI1_MEM_SIZE,
	PCI_REGION_MEM);

	/* outbound io */
	pci_set_region(r++,
	CONFIG_SYS_PCI1_IO_BUS,
	CONFIG_SYS_PCI1_IO_PHYS,
	CONFIG_SYS_PCI1_IO_SIZE,
	PCI_REGION_IO);

	#ifdef CONFIG_SYS_PCI1_MEM_BUS2
	/* outbound memory */
	pci_set_region(r++,
	CONFIG_SYS_PCI1_MEM_BUS2,
	CONFIG_SYS_PCI1_MEM_PHYS2,
	CONFIG_SYS_PCI1_MEM_SIZE2,
	PCI_REGION_MEM);
	#endif
	hose->region_count = r - hose->regions;
	hose->first_busno=first_free_busno;
	pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data);

	fsl_pci_init(hose);
	first_free_busno=hose->last_busno+1;
	printf ("PCI on bus %02x - %02x\n",
	hose->first_busno,hose->last_busno);
	} else {
	printf (" PCI: disabled\n");
	}
	}
	#else
	gur->devdisr \|= MPC85xx_DEVDISR_PCI1; /* disable */
	#endif
	}


	int board_early_init_r(void)
	{
	const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
	const u8 flash_esel = 1;

	/*
	* Remap Boot flash + PROMJET region to caching-inhibited
	* so that flash can be erased properly.
	*/

	/* Flush d-cache and invalidate i-cache of any FLASH data */
	flush_dcache();
	invalidate_icache();

	/* invalidate existing TLB entry for flash + promjet */
	disable_tlb(flash_esel);

	set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS, /* tlb, epn, rpn */
	MAS3_SX\|MAS3_SW\|MAS3_SR, MAS2_I\|MAS2_G, /* perms, wimge */
	0, flash_esel, BOOKE_PAGESZ_256M, 1); /* ts, esel, tsize, iprot */

	return 0;
	}

	#ifdef CONFIG_GET_CLK_FROM_ICS307
	/* decode S[0-2] to Output Divider (OD) */
	static unsigned char
	ics307_S_to_OD[] = {
	10, 2, 8, 4, 5, 7, 3, 6
	};

	/* Calculate frequency being generated by ICS307-02 clock chip based upon
	* the control bytes being programmed into it. */
	/* XXX: This function should probably go into a common library */
	static unsigned long
	ics307_clk_freq (unsigned char cw0, unsigned char cw1, unsigned char cw2)
	{
	const unsigned long long InputFrequency = CONFIG_ICS307_REFCLK_HZ;
	unsigned long VDW = ((cw1 << 1) & 0x1FE) + ((cw2 >> 7) & 1);
	unsigned long RDW = cw2 & 0x7F;
	unsigned long OD = ics307_S_to_OD[cw0 & 0x7];
	unsigned long freq;

	/* CLK1Frequency = InputFrequency * 2 * (VDW + 8) / ((RDW + 2) * OD) */

	/* cw0: C1 C0 TTL F1 F0 S2 S1 S0
	* cw1: V8 V7 V6 V5 V4 V3 V2 V1
	* cw2: V0 R6 R5 R4 R3 R2 R1 R0
	*
	* R6:R0 = Reference Divider Word (RDW)
	* V8:V0 = VCO Divider Word (VDW)
	* S2:S0 = Output Divider Select (OD)
	* F1:F0 = Function of CLK2 Output
	* TTL = duty cycle
	* C1:C0 = internal load capacitance for cyrstal
	*/

	/* Adding 1 to get a "nicely" rounded number, but this needs
	* more tweaking to get a "properly" rounded number. */

	freq = 1 + (InputFrequency * 2 * (VDW + 8) / ((RDW + 2) * OD));

	debug("ICS307: CW[0-2]: %02X %02X %02X => %u Hz\n", cw0, cw1, cw2,
	freq);
	return freq;
	}

	unsigned long
	get_board_sys_clk(ulong dummy)
	{
	return ics307_clk_freq (
	in8(PIXIS_BASE + PIXIS_VSYSCLK0),
	in8(PIXIS_BASE + PIXIS_VSYSCLK1),
	in8(PIXIS_BASE + PIXIS_VSYSCLK2)
	);
	}

	unsigned long
	get_board_ddr_clk(ulong dummy)
	{
	return ics307_clk_freq (
	in8(PIXIS_BASE + PIXIS_VDDRCLK0),
	in8(PIXIS_BASE + PIXIS_VDDRCLK1),
	in8(PIXIS_BASE + PIXIS_VDDRCLK2)
	);
	}
	#else
	unsigned long
	get_board_sys_clk(ulong dummy)
	{
	u8 i;
	ulong val = 0;

	i = in8(PIXIS_BASE + PIXIS_SPD);
	i &= 0x07;

	switch (i) {
	case 0:
	val = 33333333;
	break;
	case 1:
	val = 40000000;
	break;
	case 2:
	val = 50000000;
	break;
	case 3:
	val = 66666666;
	break;
	case 4:
	val = 83333333;
	break;
	case 5:
	val = 100000000;
	break;
	case 6:
	val = 133333333;
	break;
	case 7:
	val = 166666666;
	break;
	}

	return val;
	}

	unsigned long
	get_board_ddr_clk(ulong dummy)
	{
	u8 i;
	ulong val = 0;

	i = in8(PIXIS_BASE + PIXIS_SPD);
	i &= 0x38;
	i >>= 3;

	switch (i) {
	case 0:
	val = 33333333;
	break;
	case 1:
	val = 40000000;
	break;
	case 2:
	val = 50000000;
	break;
	case 3:
	val = 66666666;
	break;
	case 4:
	val = 83333333;
	break;
	case 5:
	val = 100000000;
	break;
	case 6:
	val = 133333333;
	break;
	case 7:
	val = 166666666;
	break;
	}
	return val;
	}
	#endif

	int sata_initialize(void)
	{
	volatile ccsr_gur_t gur = (void )(CONFIG_SYS_MPC85xx_GUTS_ADDR);
	uint sdrs2_io_sel =
	(gur->pordevsr & MPC85xx_PORDEVSR_SRDS2_IO_SEL) >> 27;
	if (sdrs2_io_sel & 0x04)
	return 1;

	return __sata_initialize();
	}

	int board_eth_init(bd_t *bis)
	{
	#ifdef CONFIG_TSEC_ENET
	struct tsec_info_struct tsec_info[2];
	volatile ccsr_gur_t gur = (void )(CONFIG_SYS_MPC85xx_GUTS_ADDR);
	int num = 0;
	uint sdrs2_io_sel =
	(gur->pordevsr & MPC85xx_PORDEVSR_SRDS2_IO_SEL) >> 27;

	#ifdef CONFIG_TSEC1
	SET_STD_TSEC_INFO(tsec_info[num], 1);
	if ((sdrs2_io_sel == 4) \|\| (sdrs2_io_sel == 6)) {
	tsec_info[num].phyaddr = 0;
	tsec_info[num].flags \|= TSEC_SGMII;
	}
	num++;
	#endif
	#ifdef CONFIG_TSEC3
	SET_STD_TSEC_INFO(tsec_info[num], 3);
	if (sdrs2_io_sel == 4) {
	tsec_info[num].phyaddr = 1;
	tsec_info[num].flags \|= TSEC_SGMII;
	}
	num++;
	#endif

	if (!num) {
	printf("No TSECs initialized\n");
	return 0;
	}

	#ifdef CONFIG_FSL_SGMII_RISER
	if ((sdrs2_io_sel == 4) \|\| (sdrs2_io_sel == 6))
	fsl_sgmii_riser_init(tsec_info, num);
	#endif

	tsec_eth_init(bis, tsec_info, num);
	#endif
	return pci_eth_init(bis);
	}

	#if defined(CONFIG_OF_BOARD_SETUP)
	void ft_board_setup(void blob, bd_t bd)
	{
	ft_cpu_setup(blob, bd);

	#ifdef CONFIG_PCI1
	ft_fsl_pci_setup(blob, "pci0", &pci1_hose);
	#endif
	#ifdef CONFIG_PCIE2
	ft_fsl_pci_setup(blob, "pci1", &pcie2_hose);
	#endif
	#ifdef CONFIG_PCIE2
	ft_fsl_pci_setup(blob, "pci2", &pcie1_hose);
	#endif
	#ifdef CONFIG_PCIE1
	ft_fsl_pci_setup(blob, "pci3", &pcie3_hose);
	#endif
	#ifdef CONFIG_FSL_SGMII_RISER
	fsl_sgmii_riser_fdt_fixup(blob);
	#endif
	}
	#endif