drivers/ddr/fsl/util.c - github/trini/u-boot - Gitiles

 // SPDX-License-Identifier: GPL-2.0
 /*
  * Copyright 2008-2014 Freescale Semiconductor, Inc.
  */

 #include <common.h>
 #ifdef CONFIG_PPC
 #include <asm/fsl_law.h>
 #endif
 #include <div64.h>
 #include <linux/delay.h>

 #include <fsl_ddr.h>
 #include <fsl_immap.h>
 #include <log.h>
 #include <asm/io.h>
 #if defined(CONFIG_FSL_LSCH2) || defined(CONFIG_FSL_LSCH3) || \
 	defined(CONFIG_ARM)
 #include <asm/arch/clock.h>
 #endif

 /* To avoid 64-bit full-divides, we factor this here */
 #define ULL_2E12 2000000000000ULL
 #define UL_5POW12 244140625UL
 #define UL_2POW13 (1UL << 13)

 #define ULL_8FS 0xFFFFFFFFULL

 u32 fsl_ddr_get_version(unsigned int ctrl_num)
 {
 	struct ccsr_ddr __iomem *ddr;
 	u32 ver_major_minor_errata;

 	switch (ctrl_num) {
 	case 0:
 		ddr = (void *)CONFIG_SYS_FSL_DDR_ADDR;
 		break;
 #if defined(CONFIG_SYS_FSL_DDR2_ADDR) && (CONFIG_SYS_NUM_DDR_CTLRS > 1)
 	case 1:
 		ddr = (void *)CONFIG_SYS_FSL_DDR2_ADDR;
 		break;
 #endif
 #if defined(CONFIG_SYS_FSL_DDR3_ADDR) && (CONFIG_SYS_NUM_DDR_CTLRS > 2)
 	case 2:
 		ddr = (void *)CONFIG_SYS_FSL_DDR3_ADDR;
 		break;
 #endif
 #if defined(CONFIG_SYS_FSL_DDR4_ADDR) && (CONFIG_SYS_NUM_DDR_CTLRS > 3)
 	case 3:
 		ddr = (void *)CONFIG_SYS_FSL_DDR4_ADDR;
 		break;
 #endif
 	default:
 		printf("%s unexpected ctrl_num = %u\n", __func__, ctrl_num);
 		return 0;
 	}
 	ver_major_minor_errata = (ddr_in32(&ddr->ip_rev1) & 0xFFFF) << 8;
 	ver_major_minor_errata |= (ddr_in32(&ddr->ip_rev2) & 0xFF00) >> 8;

 	return ver_major_minor_errata;
 }

 /*
  * Round up mclk_ps to nearest 1 ps in memory controller code
  * if the error is 0.5ps or more.
  *
  * If an imprecise data rate is too high due to rounding error
  * propagation, compute a suitably rounded mclk_ps to compute
  * a working memory controller configuration.
  */
 unsigned int get_memory_clk_period_ps(const unsigned int ctrl_num)
 {
 	unsigned int data_rate = get_ddr_freq(ctrl_num);
 	unsigned int result;

 	/* Round to nearest 10ps, being careful about 64-bit multiply/divide */
 	unsigned long long rem, mclk_ps = ULL_2E12;

 	/* Now perform the big divide, the result fits in 32-bits */
 	rem = do_div(mclk_ps, data_rate);
 	result = (rem >= (data_rate >> 1)) ? mclk_ps + 1 : mclk_ps;

 	return result;
 }

 /* Convert picoseconds into DRAM clock cycles (rounding up if needed). */
 unsigned int picos_to_mclk(const unsigned int ctrl_num, unsigned int picos)
 {
 	unsigned long long clks, clks_rem;
 	unsigned long data_rate = get_ddr_freq(ctrl_num);

 	/* Short circuit for zero picos */
 	if (!picos)
 		return 0;

 	/* First multiply the time by the data rate (32x32 => 64) */
 	clks = picos * (unsigned long long)data_rate;
 	/*
 	 * Now divide by 5^12 and track the 32-bit remainder, then divide
 	 * by 2*(2^12) using shifts (and updating the remainder).
 	 */
 	clks_rem = do_div(clks, UL_5POW12);
 	clks_rem += (clks & (UL_2POW13-1)) * UL_5POW12;
 	clks >>= 13;

 	/* If we had a remainder greater than the 1ps error, then round up */
 	if (clks_rem > data_rate)
 		clks++;

 	/* Clamp to the maximum representable value */
 	if (clks > ULL_8FS)
 		clks = ULL_8FS;
 	return (unsigned int) clks;
 }

 unsigned int mclk_to_picos(const unsigned int ctrl_num, unsigned int mclk)
 {
 	return get_memory_clk_period_ps(ctrl_num) * mclk;
 }

 #ifdef CONFIG_PPC
 void
 __fsl_ddr_set_lawbar(const common_timing_params_t *memctl_common_params,
 			   unsigned int law_memctl,
 			   unsigned int ctrl_num)
 {
 	unsigned long long base = memctl_common_params->base_address;
 	unsigned long long size = memctl_common_params->total_mem;

 	/*
 	 * If no DIMMs on this controller, do not proceed any further.
 	 */
 	if (!memctl_common_params->ndimms_present) {
 		return;
 	}

 #if !defined(CONFIG_PHYS_64BIT)
 	if (base >= CONFIG_MAX_MEM_MAPPED)
 		return;
 	if ((base + size) >= CONFIG_MAX_MEM_MAPPED)
 		size = CONFIG_MAX_MEM_MAPPED - base;
 #endif
 	if (set_ddr_laws(base, size, law_memctl) < 0) {
 		printf("%s: ERROR (ctrl #%d, TRGT ID=%x)\n", __func__, ctrl_num,
 			law_memctl);
 		return ;
 	}
 	debug("setup ddr law base = 0x%llx, size 0x%llx, TRGT_ID 0x%x\n",
 		base, size, law_memctl);
 }

 __attribute__((weak, alias("__fsl_ddr_set_lawbar"))) void
 fsl_ddr_set_lawbar(const common_timing_params_t *memctl_common_params,
 			 unsigned int memctl_interleaved,
 			 unsigned int ctrl_num);
 #endif

 void fsl_ddr_set_intl3r(const unsigned int granule_size)
 {
 #ifdef CONFIG_E6500
 	u32 *mcintl3r = (void *) (CONFIG_SYS_IMMR + 0x18004);
 	*mcintl3r = 0x80000000 | (granule_size & 0x1f);
 	debug("Enable MCINTL3R with granule size 0x%x\n", granule_size);
 #endif
 }

 u32 fsl_ddr_get_intl3r(void)
 {
 	u32 val = 0;
 #ifdef CONFIG_E6500
 	u32 *mcintl3r = (void *) (CONFIG_SYS_IMMR + 0x18004);
 	val = *mcintl3r;
 #endif
 	return val;
 }

 void print_ddr_info(unsigned int start_ctrl)
 {
 	struct ccsr_ddr __iomem *ddr =
 		(struct ccsr_ddr __iomem *)(CONFIG_SYS_FSL_DDR_ADDR);

 #if	defined(CONFIG_E6500) && (CONFIG_SYS_NUM_DDR_CTLRS == 3)
 	u32 *mcintl3r = (void *) (CONFIG_SYS_IMMR + 0x18004);
 #endif
 #if (CONFIG_SYS_NUM_DDR_CTLRS > 1)
 	uint32_t cs0_config = ddr_in32(&ddr->cs0_config);
 #endif
 	uint32_t sdram_cfg = ddr_in32(&ddr->sdram_cfg);
 	int cas_lat;

 #if CONFIG_SYS_NUM_DDR_CTLRS >= 2
 	if ((!(sdram_cfg & SDRAM_CFG_MEM_EN)) ||
 	    (start_ctrl == 1)) {
 		ddr = (void __iomem *)CONFIG_SYS_FSL_DDR2_ADDR;
 		sdram_cfg = ddr_in32(&ddr->sdram_cfg);
 	}
 #endif
 #if CONFIG_SYS_NUM_DDR_CTLRS >= 3
 	if ((!(sdram_cfg & SDRAM_CFG_MEM_EN)) ||
 	    (start_ctrl == 2)) {
 		ddr = (void __iomem *)CONFIG_SYS_FSL_DDR3_ADDR;
 		sdram_cfg = ddr_in32(&ddr->sdram_cfg);
 	}
 #endif

 	if (!(sdram_cfg & SDRAM_CFG_MEM_EN)) {
 		puts(" (DDR not enabled)\n");
 		return;
 	}

 	puts(" (DDR");
 	switch ((sdram_cfg & SDRAM_CFG_SDRAM_TYPE_MASK) >>
 		SDRAM_CFG_SDRAM_TYPE_SHIFT) {
 	case SDRAM_TYPE_DDR1:
 		puts("1");
 		break;
 	case SDRAM_TYPE_DDR2:
 		puts("2");
 		break;
 	case SDRAM_TYPE_DDR3:
 		puts("3");
 		break;
 	case SDRAM_TYPE_DDR4:
 		puts("4");
 		break;
 	default:
 		puts("?");
 		break;
 	}

 	if (sdram_cfg & SDRAM_CFG_32_BE)
 		puts(", 32-bit");
 	else if (sdram_cfg & SDRAM_CFG_16_BE)
 		puts(", 16-bit");
 	else
 		puts(", 64-bit");

 	/* Calculate CAS latency based on timing cfg values */
 	cas_lat = ((ddr_in32(&ddr->timing_cfg_1) >> 16) & 0xf);
 	if (fsl_ddr_get_version(0) <= 0x40400)
 		cas_lat += 1;
 	else
 		cas_lat += 2;
 	cas_lat += ((ddr_in32(&ddr->timing_cfg_3) >> 12) & 3) << 4;
 	printf(", CL=%d", cas_lat >> 1);
 	if (cas_lat & 0x1)
 		puts(".5");

 	if (sdram_cfg & SDRAM_CFG_ECC_EN)
 		puts(", ECC on)");
 	else
 		puts(", ECC off)");

 #if (CONFIG_SYS_NUM_DDR_CTLRS == 3)
 #ifdef CONFIG_E6500
 	if (*mcintl3r & 0x80000000) {
 		puts("\n");
 		puts("       DDR Controller Interleaving Mode: ");
 		switch (*mcintl3r & 0x1f) {
 		case FSL_DDR_3WAY_1KB_INTERLEAVING:
 			puts("3-way 1KB");
 			break;
 		case FSL_DDR_3WAY_4KB_INTERLEAVING:
 			puts("3-way 4KB");
 			break;
 		case FSL_DDR_3WAY_8KB_INTERLEAVING:
 			puts("3-way 8KB");
 			break;
 		default:
 			puts("3-way UNKNOWN");
 			break;
 		}
 	}
 #endif
 #endif
 #if (CONFIG_SYS_NUM_DDR_CTLRS >= 2)
 	if ((cs0_config & 0x20000000) && (start_ctrl == 0)) {
 		puts("\n");
 		puts("       DDR Controller Interleaving Mode: ");

 		switch ((cs0_config >> 24) & 0xf) {
 		case FSL_DDR_256B_INTERLEAVING:
 			puts("256B");
 			break;
 		case FSL_DDR_CACHE_LINE_INTERLEAVING:
 			puts("cache line");
 			break;
 		case FSL_DDR_PAGE_INTERLEAVING:
 			puts("page");
 			break;
 		case FSL_DDR_BANK_INTERLEAVING:
 			puts("bank");
 			break;
 		case FSL_DDR_SUPERBANK_INTERLEAVING:
 			puts("super-bank");
 			break;
 		default:
 			puts("invalid");
 			break;
 		}
 	}
 #endif

 	if ((sdram_cfg >> 8) & 0x7f) {
 		puts("\n");
 		puts("       DDR Chip-Select Interleaving Mode: ");
 		switch(sdram_cfg >> 8 & 0x7f) {
 		case FSL_DDR_CS0_CS1_CS2_CS3:
 			puts("CS0+CS1+CS2+CS3");
 			break;
 		case FSL_DDR_CS0_CS1:
 			puts("CS0+CS1");
 			break;
 		case FSL_DDR_CS2_CS3:
 			puts("CS2+CS3");
 			break;
 		case FSL_DDR_CS0_CS1_AND_CS2_CS3:
 			puts("CS0+CS1 and CS2+CS3");
 			break;
 		default:
 			puts("invalid");
 			break;
 		}
 	}
 }

 void __weak detail_board_ddr_info(void)
 {
 	print_ddr_info(0);
 }

 void board_add_ram_info(int use_default)
 {
 	detail_board_ddr_info();
 }

 #ifdef CONFIG_FSL_DDR_SYNC_REFRESH
 #define DDRC_DEBUG20_INIT_DONE	0x80000000
 #define DDRC_DEBUG2_RF		0x00000040
 void fsl_ddr_sync_memctl_refresh(unsigned int first_ctrl,
 				 unsigned int last_ctrl)
 {
 	unsigned int i;
 	u32 ddrc_debug20;
 	u32 ddrc_debug2[CONFIG_SYS_NUM_DDR_CTLRS] = {};
 	u32 *ddrc_debug2_p[CONFIG_SYS_NUM_DDR_CTLRS] = {};
 	struct ccsr_ddr __iomem *ddr;

 	for (i = first_ctrl; i <= last_ctrl; i++) {
 		switch (i) {
 		case 0:
 			ddr = (void *)CONFIG_SYS_FSL_DDR_ADDR;
 			break;
 #if defined(CONFIG_SYS_FSL_DDR2_ADDR) && (CONFIG_SYS_NUM_DDR_CTLRS > 1)
 		case 1:
 			ddr = (void *)CONFIG_SYS_FSL_DDR2_ADDR;
 			break;
 #endif
 #if defined(CONFIG_SYS_FSL_DDR3_ADDR) && (CONFIG_SYS_NUM_DDR_CTLRS > 2)
 		case 2:
 			ddr = (void *)CONFIG_SYS_FSL_DDR3_ADDR;
 			break;
 #endif
 #if defined(CONFIG_SYS_FSL_DDR4_ADDR) && (CONFIG_SYS_NUM_DDR_CTLRS > 3)
 		case 3:
 			ddr = (void *)CONFIG_SYS_FSL_DDR4_ADDR;
 			break;
 #endif
 		default:
 			printf("%s unexpected ctrl = %u\n", __func__, i);
 			return;
 		}
 		ddrc_debug20 = ddr_in32(&ddr->debug[19]);
 		ddrc_debug2_p[i] = &ddr->debug[1];
 		while (!(ddrc_debug20 & DDRC_DEBUG20_INIT_DONE)) {
 			/* keep polling until DDRC init is done */
 			udelay(100);
 			ddrc_debug20 = ddr_in32(&ddr->debug[19]);
 		}
 		ddrc_debug2[i] = ddr_in32(&ddr->debug[1]) | DDRC_DEBUG2_RF;
 	}
 	/*
 	 * Sync refresh
 	 * This is put together to make sure the refresh reqeusts are sent
 	 * closely to each other.
 	 */
 	for (i = first_ctrl; i <= last_ctrl; i++)
 		ddr_out32(ddrc_debug2_p[i], ddrc_debug2[i]);
 }
 #endif /* CONFIG_FSL_DDR_SYNC_REFRESH */

 void remove_unused_controllers(fsl_ddr_info_t *info)
 {
 #ifdef CONFIG_SYS_FSL_HAS_CCN504
 	int i;
 	u64 nodeid;
 	void *hnf_sam_ctrl = (void *)(CCI_HN_F_0_BASE + CCN_HN_F_SAM_CTL);
 	bool ddr0_used = false;
 	bool ddr1_used = false;

 	for (i = 0; i < 8; i++) {
 		nodeid = in_le64(hnf_sam_ctrl) & CCN_HN_F_SAM_NODEID_MASK;
 		if (nodeid == CCN_HN_F_SAM_NODEID_DDR0) {
 			ddr0_used = true;
 		} else if (nodeid == CCN_HN_F_SAM_NODEID_DDR1) {
 			ddr1_used = true;
 		} else {
 			printf("Unknown nodeid in HN-F SAM control: 0x%llx\n",
 			       nodeid);
 		}
 		hnf_sam_ctrl += (CCI_HN_F_1_BASE - CCI_HN_F_0_BASE);
 	}
 	if (!ddr0_used && !ddr1_used) {
 		printf("Invalid configuration in HN-F SAM control\n");
 		return;
 	}

 	if (!ddr0_used && info->first_ctrl == 0) {
 		info->first_ctrl = 1;
 		info->num_ctrls = 1;
 		debug("First DDR controller disabled\n");
 		return;
 	}

 	if (!ddr1_used && info->first_ctrl + info->num_ctrls > 1) {
 		info->num_ctrls = 1;
 		debug("Second DDR controller disabled\n");
 	}
 #endif
 }
	// SPDX-License-Identifier: GPL-2.0
	/*
	* Copyright 2008-2014 Freescale Semiconductor, Inc.
	*/

	#include <common.h>
	#ifdef CONFIG_PPC
	#include <asm/fsl_law.h>
	#endif
	#include <div64.h>
	#include <linux/delay.h>

	#include <fsl_ddr.h>
	#include <fsl_immap.h>
	#include <log.h>
	#include <asm/io.h>
	#if defined(CONFIG_FSL_LSCH2) \|\| defined(CONFIG_FSL_LSCH3) \|\| \
	defined(CONFIG_ARM)
	#include <asm/arch/clock.h>
	#endif

	/* To avoid 64-bit full-divides, we factor this here */
	#define ULL_2E12 2000000000000ULL
	#define UL_5POW12 244140625UL
	#define UL_2POW13 (1UL << 13)

	#define ULL_8FS 0xFFFFFFFFULL

	u32 fsl_ddr_get_version(unsigned int ctrl_num)
	{
	struct ccsr_ddr __iomem *ddr;
	u32 ver_major_minor_errata;

	switch (ctrl_num) {
	case 0:
	ddr = (void *)CONFIG_SYS_FSL_DDR_ADDR;
	break;
	#if defined(CONFIG_SYS_FSL_DDR2_ADDR) && (CONFIG_SYS_NUM_DDR_CTLRS > 1)
	case 1:
	ddr = (void *)CONFIG_SYS_FSL_DDR2_ADDR;
	break;
	#endif
	#if defined(CONFIG_SYS_FSL_DDR3_ADDR) && (CONFIG_SYS_NUM_DDR_CTLRS > 2)
	case 2:
	ddr = (void *)CONFIG_SYS_FSL_DDR3_ADDR;
	break;
	#endif
	#if defined(CONFIG_SYS_FSL_DDR4_ADDR) && (CONFIG_SYS_NUM_DDR_CTLRS > 3)
	case 3:
	ddr = (void *)CONFIG_SYS_FSL_DDR4_ADDR;
	break;
	#endif
	default:
	printf("%s unexpected ctrl_num = %u\n", __func__, ctrl_num);
	return 0;
	}
	ver_major_minor_errata = (ddr_in32(&ddr->ip_rev1) & 0xFFFF) << 8;
	ver_major_minor_errata \|= (ddr_in32(&ddr->ip_rev2) & 0xFF00) >> 8;

	return ver_major_minor_errata;
	}

	/*
	* Round up mclk_ps to nearest 1 ps in memory controller code
	* if the error is 0.5ps or more.
	*
	* If an imprecise data rate is too high due to rounding error
	* propagation, compute a suitably rounded mclk_ps to compute
	* a working memory controller configuration.
	*/
	unsigned int get_memory_clk_period_ps(const unsigned int ctrl_num)
	{
	unsigned int data_rate = get_ddr_freq(ctrl_num);
	unsigned int result;

	/* Round to nearest 10ps, being careful about 64-bit multiply/divide */
	unsigned long long rem, mclk_ps = ULL_2E12;

	/* Now perform the big divide, the result fits in 32-bits */
	rem = do_div(mclk_ps, data_rate);
	result = (rem >= (data_rate >> 1)) ? mclk_ps + 1 : mclk_ps;

	return result;
	}

	/* Convert picoseconds into DRAM clock cycles (rounding up if needed). */
	unsigned int picos_to_mclk(const unsigned int ctrl_num, unsigned int picos)
	{
	unsigned long long clks, clks_rem;
	unsigned long data_rate = get_ddr_freq(ctrl_num);

	/* Short circuit for zero picos */
	if (!picos)
	return 0;

	/* First multiply the time by the data rate (32x32 => 64) */
	clks = picos * (unsigned long long)data_rate;
	/*
	* Now divide by 5^12 and track the 32-bit remainder, then divide
	* by 2*(2^12) using shifts (and updating the remainder).
	*/
	clks_rem = do_div(clks, UL_5POW12);
	clks_rem += (clks & (UL_2POW13-1)) * UL_5POW12;
	clks >>= 13;

	/* If we had a remainder greater than the 1ps error, then round up */
	if (clks_rem > data_rate)
	clks++;

	/* Clamp to the maximum representable value */
	if (clks > ULL_8FS)
	clks = ULL_8FS;
	return (unsigned int) clks;
	}

	unsigned int mclk_to_picos(const unsigned int ctrl_num, unsigned int mclk)
	{
	return get_memory_clk_period_ps(ctrl_num) * mclk;
	}

	#ifdef CONFIG_PPC
	void
	__fsl_ddr_set_lawbar(const common_timing_params_t *memctl_common_params,
	unsigned int law_memctl,
	unsigned int ctrl_num)
	{
	unsigned long long base = memctl_common_params->base_address;
	unsigned long long size = memctl_common_params->total_mem;

	/*
	* If no DIMMs on this controller, do not proceed any further.
	*/
	if (!memctl_common_params->ndimms_present) {
	return;
	}

	#if !defined(CONFIG_PHYS_64BIT)
	if (base >= CONFIG_MAX_MEM_MAPPED)
	return;
	if ((base + size) >= CONFIG_MAX_MEM_MAPPED)
	size = CONFIG_MAX_MEM_MAPPED - base;
	#endif
	if (set_ddr_laws(base, size, law_memctl) < 0) {
	printf("%s: ERROR (ctrl #%d, TRGT ID=%x)\n", __func__, ctrl_num,
	law_memctl);
	return ;
	}
	debug("setup ddr law base = 0x%llx, size 0x%llx, TRGT_ID 0x%x\n",
	base, size, law_memctl);
	}

	__attribute__((weak, alias("__fsl_ddr_set_lawbar"))) void
	fsl_ddr_set_lawbar(const common_timing_params_t *memctl_common_params,
	unsigned int memctl_interleaved,
	unsigned int ctrl_num);
	#endif

	void fsl_ddr_set_intl3r(const unsigned int granule_size)
	{
	#ifdef CONFIG_E6500
	u32 mcintl3r = (void ) (CONFIG_SYS_IMMR + 0x18004);
	*mcintl3r = 0x80000000 \| (granule_size & 0x1f);
	debug("Enable MCINTL3R with granule size 0x%x\n", granule_size);
	#endif
	}

	u32 fsl_ddr_get_intl3r(void)
	{
	u32 val = 0;
	#ifdef CONFIG_E6500
	u32 mcintl3r = (void ) (CONFIG_SYS_IMMR + 0x18004);
	val = *mcintl3r;
	#endif
	return val;
	}

	void print_ddr_info(unsigned int start_ctrl)
	{
	struct ccsr_ddr __iomem *ddr =
	(struct ccsr_ddr __iomem *)(CONFIG_SYS_FSL_DDR_ADDR);

	#if defined(CONFIG_E6500) && (CONFIG_SYS_NUM_DDR_CTLRS == 3)
	u32 mcintl3r = (void ) (CONFIG_SYS_IMMR + 0x18004);
	#endif
	#if (CONFIG_SYS_NUM_DDR_CTLRS > 1)
	uint32_t cs0_config = ddr_in32(&ddr->cs0_config);
	#endif
	uint32_t sdram_cfg = ddr_in32(&ddr->sdram_cfg);
	int cas_lat;

	#if CONFIG_SYS_NUM_DDR_CTLRS >= 2
	if ((!(sdram_cfg & SDRAM_CFG_MEM_EN)) \|\|
	(start_ctrl == 1)) {
	ddr = (void __iomem *)CONFIG_SYS_FSL_DDR2_ADDR;
	sdram_cfg = ddr_in32(&ddr->sdram_cfg);
	}
	#endif
	#if CONFIG_SYS_NUM_DDR_CTLRS >= 3
	if ((!(sdram_cfg & SDRAM_CFG_MEM_EN)) \|\|
	(start_ctrl == 2)) {
	ddr = (void __iomem *)CONFIG_SYS_FSL_DDR3_ADDR;
	sdram_cfg = ddr_in32(&ddr->sdram_cfg);
	}
	#endif

	if (!(sdram_cfg & SDRAM_CFG_MEM_EN)) {
	puts(" (DDR not enabled)\n");
	return;
	}

	puts(" (DDR");
	switch ((sdram_cfg & SDRAM_CFG_SDRAM_TYPE_MASK) >>
	SDRAM_CFG_SDRAM_TYPE_SHIFT) {
	case SDRAM_TYPE_DDR1:
	puts("1");
	break;
	case SDRAM_TYPE_DDR2:
	puts("2");
	break;
	case SDRAM_TYPE_DDR3:
	puts("3");
	break;
	case SDRAM_TYPE_DDR4:
	puts("4");
	break;
	default:
	puts("?");
	break;
	}

	if (sdram_cfg & SDRAM_CFG_32_BE)
	puts(", 32-bit");
	else if (sdram_cfg & SDRAM_CFG_16_BE)
	puts(", 16-bit");
	else
	puts(", 64-bit");

	/* Calculate CAS latency based on timing cfg values */
	cas_lat = ((ddr_in32(&ddr->timing_cfg_1) >> 16) & 0xf);
	if (fsl_ddr_get_version(0) <= 0x40400)
	cas_lat += 1;
	else
	cas_lat += 2;
	cas_lat += ((ddr_in32(&ddr->timing_cfg_3) >> 12) & 3) << 4;
	printf(", CL=%d", cas_lat >> 1);
	if (cas_lat & 0x1)
	puts(".5");

	if (sdram_cfg & SDRAM_CFG_ECC_EN)
	puts(", ECC on)");
	else
	puts(", ECC off)");

	#if (CONFIG_SYS_NUM_DDR_CTLRS == 3)
	#ifdef CONFIG_E6500
	if (*mcintl3r & 0x80000000) {
	puts("\n");
	puts(" DDR Controller Interleaving Mode: ");
	switch (*mcintl3r & 0x1f) {
	case FSL_DDR_3WAY_1KB_INTERLEAVING:
	puts("3-way 1KB");
	break;
	case FSL_DDR_3WAY_4KB_INTERLEAVING:
	puts("3-way 4KB");
	break;
	case FSL_DDR_3WAY_8KB_INTERLEAVING:
	puts("3-way 8KB");
	break;
	default:
	puts("3-way UNKNOWN");
	break;
	}
	}
	#endif
	#endif
	#if (CONFIG_SYS_NUM_DDR_CTLRS >= 2)
	if ((cs0_config & 0x20000000) && (start_ctrl == 0)) {
	puts("\n");
	puts(" DDR Controller Interleaving Mode: ");

	switch ((cs0_config >> 24) & 0xf) {
	case FSL_DDR_256B_INTERLEAVING:
	puts("256B");
	break;
	case FSL_DDR_CACHE_LINE_INTERLEAVING:
	puts("cache line");
	break;
	case FSL_DDR_PAGE_INTERLEAVING:
	puts("page");
	break;
	case FSL_DDR_BANK_INTERLEAVING:
	puts("bank");
	break;
	case FSL_DDR_SUPERBANK_INTERLEAVING:
	puts("super-bank");
	break;
	default:
	puts("invalid");
	break;
	}
	}
	#endif

	if ((sdram_cfg >> 8) & 0x7f) {
	puts("\n");
	puts(" DDR Chip-Select Interleaving Mode: ");
	switch(sdram_cfg >> 8 & 0x7f) {
	case FSL_DDR_CS0_CS1_CS2_CS3:
	puts("CS0+CS1+CS2+CS3");
	break;
	case FSL_DDR_CS0_CS1:
	puts("CS0+CS1");
	break;
	case FSL_DDR_CS2_CS3:
	puts("CS2+CS3");
	break;
	case FSL_DDR_CS0_CS1_AND_CS2_CS3:
	puts("CS0+CS1 and CS2+CS3");
	break;
	default:
	puts("invalid");
	break;
	}
	}
	}

	void __weak detail_board_ddr_info(void)
	{
	print_ddr_info(0);
	}

	void board_add_ram_info(int use_default)
	{
	detail_board_ddr_info();
	}

	#ifdef CONFIG_FSL_DDR_SYNC_REFRESH
	#define DDRC_DEBUG20_INIT_DONE 0x80000000
	#define DDRC_DEBUG2_RF 0x00000040
	void fsl_ddr_sync_memctl_refresh(unsigned int first_ctrl,
	unsigned int last_ctrl)
	{
	unsigned int i;
	u32 ddrc_debug20;
	u32 ddrc_debug2[CONFIG_SYS_NUM_DDR_CTLRS] = {};
	u32 *ddrc_debug2_p[CONFIG_SYS_NUM_DDR_CTLRS] = {};
	struct ccsr_ddr __iomem *ddr;

	for (i = first_ctrl; i <= last_ctrl; i++) {
	switch (i) {
	case 0:
	ddr = (void *)CONFIG_SYS_FSL_DDR_ADDR;
	break;
	#if defined(CONFIG_SYS_FSL_DDR2_ADDR) && (CONFIG_SYS_NUM_DDR_CTLRS > 1)
	case 1:
	ddr = (void *)CONFIG_SYS_FSL_DDR2_ADDR;
	break;
	#endif
	#if defined(CONFIG_SYS_FSL_DDR3_ADDR) && (CONFIG_SYS_NUM_DDR_CTLRS > 2)
	case 2:
	ddr = (void *)CONFIG_SYS_FSL_DDR3_ADDR;
	break;
	#endif
	#if defined(CONFIG_SYS_FSL_DDR4_ADDR) && (CONFIG_SYS_NUM_DDR_CTLRS > 3)
	case 3:
	ddr = (void *)CONFIG_SYS_FSL_DDR4_ADDR;
	break;
	#endif
	default:
	printf("%s unexpected ctrl = %u\n", __func__, i);
	return;
	}
	ddrc_debug20 = ddr_in32(&ddr->debug[19]);
	ddrc_debug2_p[i] = &ddr->debug[1];
	while (!(ddrc_debug20 & DDRC_DEBUG20_INIT_DONE)) {
	/* keep polling until DDRC init is done */
	udelay(100);
	ddrc_debug20 = ddr_in32(&ddr->debug[19]);
	}
	ddrc_debug2[i] = ddr_in32(&ddr->debug[1]) \| DDRC_DEBUG2_RF;
	}
	/*
	* Sync refresh
	* This is put together to make sure the refresh reqeusts are sent
	* closely to each other.
	*/
	for (i = first_ctrl; i <= last_ctrl; i++)
	ddr_out32(ddrc_debug2_p[i], ddrc_debug2[i]);
	}
	#endif /* CONFIG_FSL_DDR_SYNC_REFRESH */

	void remove_unused_controllers(fsl_ddr_info_t *info)
	{
	#ifdef CONFIG_SYS_FSL_HAS_CCN504
	int i;
	u64 nodeid;
	void hnf_sam_ctrl = (void )(CCI_HN_F_0_BASE + CCN_HN_F_SAM_CTL);
	bool ddr0_used = false;
	bool ddr1_used = false;

	for (i = 0; i < 8; i++) {
	nodeid = in_le64(hnf_sam_ctrl) & CCN_HN_F_SAM_NODEID_MASK;
	if (nodeid == CCN_HN_F_SAM_NODEID_DDR0) {
	ddr0_used = true;
	} else if (nodeid == CCN_HN_F_SAM_NODEID_DDR1) {
	ddr1_used = true;
	} else {
	printf("Unknown nodeid in HN-F SAM control: 0x%llx\n",
	nodeid);
	}
	hnf_sam_ctrl += (CCI_HN_F_1_BASE - CCI_HN_F_0_BASE);
	}
	if (!ddr0_used && !ddr1_used) {
	printf("Invalid configuration in HN-F SAM control\n");
	return;
	}

	if (!ddr0_used && info->first_ctrl == 0) {
	info->first_ctrl = 1;
	info->num_ctrls = 1;
	debug("First DDR controller disabled\n");
	return;
	}

	if (!ddr1_used && info->first_ctrl + info->num_ctrls > 1) {
	info->num_ctrls = 1;
	debug("Second DDR controller disabled\n");
	}
	#endif
	}