| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * (C) Copyright 2001-2015 |
| * Wolfgang Denk, DENX Software Engineering, wd@denx.de. |
| * Joe Hershberger, National Instruments |
| */ |
| |
| #include <common.h> |
| #include <dm.h> |
| #include <env.h> |
| #include <net.h> |
| #include <dm/device-internal.h> |
| #include <dm/uclass-internal.h> |
| #include <net/pcap.h> |
| #include "eth_internal.h" |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| /** |
| * struct eth_device_priv - private structure for each Ethernet device |
| * |
| * @state: The state of the Ethernet MAC driver (defined by enum eth_state_t) |
| */ |
| struct eth_device_priv { |
| enum eth_state_t state; |
| }; |
| |
| /** |
| * struct eth_uclass_priv - The structure attached to the uclass itself |
| * |
| * @current: The Ethernet device that the network functions are using |
| */ |
| struct eth_uclass_priv { |
| struct udevice *current; |
| }; |
| |
| /* eth_errno - This stores the most recent failure code from DM functions */ |
| static int eth_errno; |
| |
| static struct eth_uclass_priv *eth_get_uclass_priv(void) |
| { |
| struct uclass *uc; |
| |
| uclass_get(UCLASS_ETH, &uc); |
| assert(uc); |
| return uc->priv; |
| } |
| |
| void eth_set_current_to_next(void) |
| { |
| struct eth_uclass_priv *uc_priv; |
| |
| uc_priv = eth_get_uclass_priv(); |
| if (uc_priv->current) |
| uclass_next_device(&uc_priv->current); |
| if (!uc_priv->current) |
| uclass_first_device(UCLASS_ETH, &uc_priv->current); |
| } |
| |
| /* |
| * Typically this will simply return the active device. |
| * In the case where the most recent active device was unset, this will attempt |
| * to return the first device. If that device doesn't exist or fails to probe, |
| * this function will return NULL. |
| */ |
| struct udevice *eth_get_dev(void) |
| { |
| struct eth_uclass_priv *uc_priv; |
| |
| uc_priv = eth_get_uclass_priv(); |
| if (!uc_priv->current) |
| eth_errno = uclass_first_device(UCLASS_ETH, |
| &uc_priv->current); |
| return uc_priv->current; |
| } |
| |
| /* |
| * Typically this will just store a device pointer. |
| * In case it was not probed, we will attempt to do so. |
| * dev may be NULL to unset the active device. |
| */ |
| void eth_set_dev(struct udevice *dev) |
| { |
| if (dev && !device_active(dev)) { |
| eth_errno = device_probe(dev); |
| if (eth_errno) |
| dev = NULL; |
| } |
| |
| eth_get_uclass_priv()->current = dev; |
| } |
| |
| /* |
| * Find the udevice that either has the name passed in as devname or has an |
| * alias named devname. |
| */ |
| struct udevice *eth_get_dev_by_name(const char *devname) |
| { |
| int seq = -1; |
| char *endp = NULL; |
| const char *startp = NULL; |
| struct udevice *it; |
| struct uclass *uc; |
| int len = strlen("eth"); |
| |
| /* Must be longer than 3 to be an alias */ |
| if (!strncmp(devname, "eth", len) && strlen(devname) > len) { |
| startp = devname + len; |
| seq = simple_strtoul(startp, &endp, 10); |
| } |
| |
| uclass_get(UCLASS_ETH, &uc); |
| uclass_foreach_dev(it, uc) { |
| /* |
| * We need the seq to be valid, so try to probe it. |
| * If the probe fails, the seq will not match since it will be |
| * -1 instead of what we are looking for. |
| * We don't care about errors from probe here. Either they won't |
| * match an alias or it will match a literal name and we'll pick |
| * up the error when we try to probe again in eth_set_dev(). |
| */ |
| if (device_probe(it)) |
| continue; |
| /* Check for the name or the sequence number to match */ |
| if (strcmp(it->name, devname) == 0 || |
| (endp > startp && it->seq == seq)) |
| return it; |
| } |
| |
| return NULL; |
| } |
| |
| unsigned char *eth_get_ethaddr(void) |
| { |
| struct eth_pdata *pdata; |
| |
| if (eth_get_dev()) { |
| pdata = eth_get_dev()->platdata; |
| return pdata->enetaddr; |
| } |
| |
| return NULL; |
| } |
| |
| /* Set active state without calling start on the driver */ |
| int eth_init_state_only(void) |
| { |
| struct udevice *current; |
| struct eth_device_priv *priv; |
| |
| current = eth_get_dev(); |
| if (!current || !device_active(current)) |
| return -EINVAL; |
| |
| priv = current->uclass_priv; |
| priv->state = ETH_STATE_ACTIVE; |
| |
| return 0; |
| } |
| |
| /* Set passive state without calling stop on the driver */ |
| void eth_halt_state_only(void) |
| { |
| struct udevice *current; |
| struct eth_device_priv *priv; |
| |
| current = eth_get_dev(); |
| if (!current || !device_active(current)) |
| return; |
| |
| priv = current->uclass_priv; |
| priv->state = ETH_STATE_PASSIVE; |
| } |
| |
| int eth_get_dev_index(void) |
| { |
| if (eth_get_dev()) |
| return eth_get_dev()->seq; |
| return -1; |
| } |
| |
| static int eth_write_hwaddr(struct udevice *dev) |
| { |
| struct eth_pdata *pdata; |
| int ret = 0; |
| |
| if (!dev || !device_active(dev)) |
| return -EINVAL; |
| |
| /* seq is valid since the device is active */ |
| if (eth_get_ops(dev)->write_hwaddr && !eth_mac_skip(dev->seq)) { |
| pdata = dev->platdata; |
| if (!is_valid_ethaddr(pdata->enetaddr)) { |
| printf("\nError: %s address %pM illegal value\n", |
| dev->name, pdata->enetaddr); |
| return -EINVAL; |
| } |
| |
| /* |
| * Drivers are allowed to decide not to implement this at |
| * run-time. E.g. Some devices may use it and some may not. |
| */ |
| ret = eth_get_ops(dev)->write_hwaddr(dev); |
| if (ret == -ENOSYS) |
| ret = 0; |
| if (ret) |
| printf("\nWarning: %s failed to set MAC address\n", |
| dev->name); |
| } |
| |
| return ret; |
| } |
| |
| static int on_ethaddr(const char *name, const char *value, enum env_op op, |
| int flags) |
| { |
| int index; |
| int retval; |
| struct udevice *dev; |
| |
| /* look for an index after "eth" */ |
| index = simple_strtoul(name + 3, NULL, 10); |
| |
| retval = uclass_find_device_by_seq(UCLASS_ETH, index, false, &dev); |
| if (!retval) { |
| struct eth_pdata *pdata = dev->platdata; |
| switch (op) { |
| case env_op_create: |
| case env_op_overwrite: |
| string_to_enetaddr(value, pdata->enetaddr); |
| eth_write_hwaddr(dev); |
| break; |
| case env_op_delete: |
| memset(pdata->enetaddr, 0, ARP_HLEN); |
| } |
| } |
| |
| return 0; |
| } |
| U_BOOT_ENV_CALLBACK(ethaddr, on_ethaddr); |
| |
| int eth_init(void) |
| { |
| char *ethact = env_get("ethact"); |
| char *ethrotate = env_get("ethrotate"); |
| struct udevice *current = NULL; |
| struct udevice *old_current; |
| int ret = -ENODEV; |
| |
| /* |
| * When 'ethrotate' variable is set to 'no' and 'ethact' variable |
| * is already set to an ethernet device, we should stick to 'ethact'. |
| */ |
| if ((ethrotate != NULL) && (strcmp(ethrotate, "no") == 0)) { |
| if (ethact) { |
| current = eth_get_dev_by_name(ethact); |
| if (!current) |
| return -EINVAL; |
| } |
| } |
| |
| if (!current) { |
| current = eth_get_dev(); |
| if (!current) { |
| printf("No ethernet found.\n"); |
| return -ENODEV; |
| } |
| } |
| |
| old_current = current; |
| do { |
| if (current) { |
| debug("Trying %s\n", current->name); |
| |
| if (device_active(current)) { |
| ret = eth_get_ops(current)->start(current); |
| if (ret >= 0) { |
| struct eth_device_priv *priv = |
| current->uclass_priv; |
| |
| priv->state = ETH_STATE_ACTIVE; |
| return 0; |
| } |
| } else { |
| ret = eth_errno; |
| } |
| |
| debug("FAIL\n"); |
| } else { |
| debug("PROBE FAIL\n"); |
| } |
| |
| /* |
| * If ethrotate is enabled, this will change "current", |
| * otherwise we will drop out of this while loop immediately |
| */ |
| eth_try_another(0); |
| /* This will ensure the new "current" attempted to probe */ |
| current = eth_get_dev(); |
| } while (old_current != current); |
| |
| return ret; |
| } |
| |
| void eth_halt(void) |
| { |
| struct udevice *current; |
| struct eth_device_priv *priv; |
| |
| current = eth_get_dev(); |
| if (!current || !eth_is_active(current)) |
| return; |
| |
| eth_get_ops(current)->stop(current); |
| priv = current->uclass_priv; |
| if (priv) |
| priv->state = ETH_STATE_PASSIVE; |
| } |
| |
| int eth_is_active(struct udevice *dev) |
| { |
| struct eth_device_priv *priv; |
| |
| if (!dev || !device_active(dev)) |
| return 0; |
| |
| priv = dev_get_uclass_priv(dev); |
| return priv->state == ETH_STATE_ACTIVE; |
| } |
| |
| int eth_send(void *packet, int length) |
| { |
| struct udevice *current; |
| int ret; |
| |
| current = eth_get_dev(); |
| if (!current) |
| return -ENODEV; |
| |
| if (!eth_is_active(current)) |
| return -EINVAL; |
| |
| ret = eth_get_ops(current)->send(current, packet, length); |
| if (ret < 0) { |
| /* We cannot completely return the error at present */ |
| debug("%s: send() returned error %d\n", __func__, ret); |
| } |
| #if defined(CONFIG_CMD_PCAP) |
| if (ret >= 0) |
| pcap_post(packet, length, true); |
| #endif |
| return ret; |
| } |
| |
| int eth_rx(void) |
| { |
| struct udevice *current; |
| uchar *packet; |
| int flags; |
| int ret; |
| int i; |
| |
| current = eth_get_dev(); |
| if (!current) |
| return -ENODEV; |
| |
| if (!eth_is_active(current)) |
| return -EINVAL; |
| |
| /* Process up to 32 packets at one time */ |
| flags = ETH_RECV_CHECK_DEVICE; |
| for (i = 0; i < 32; i++) { |
| ret = eth_get_ops(current)->recv(current, flags, &packet); |
| flags = 0; |
| if (ret > 0) |
| net_process_received_packet(packet, ret); |
| if (ret >= 0 && eth_get_ops(current)->free_pkt) |
| eth_get_ops(current)->free_pkt(current, packet, ret); |
| if (ret <= 0) |
| break; |
| } |
| if (ret == -EAGAIN) |
| ret = 0; |
| if (ret < 0) { |
| /* We cannot completely return the error at present */ |
| debug("%s: recv() returned error %d\n", __func__, ret); |
| } |
| return ret; |
| } |
| |
| int eth_initialize(void) |
| { |
| int num_devices = 0; |
| struct udevice *dev; |
| |
| eth_common_init(); |
| |
| /* |
| * Devices need to write the hwaddr even if not started so that Linux |
| * will have access to the hwaddr that u-boot stored for the device. |
| * This is accomplished by attempting to probe each device and calling |
| * their write_hwaddr() operation. |
| */ |
| uclass_first_device_check(UCLASS_ETH, &dev); |
| if (!dev) { |
| printf("No ethernet found.\n"); |
| bootstage_error(BOOTSTAGE_ID_NET_ETH_START); |
| } else { |
| char *ethprime = env_get("ethprime"); |
| struct udevice *prime_dev = NULL; |
| |
| if (ethprime) |
| prime_dev = eth_get_dev_by_name(ethprime); |
| if (prime_dev) { |
| eth_set_dev(prime_dev); |
| eth_current_changed(); |
| } else { |
| eth_set_dev(NULL); |
| } |
| |
| bootstage_mark(BOOTSTAGE_ID_NET_ETH_INIT); |
| do { |
| if (num_devices) |
| printf(", "); |
| |
| printf("eth%d: %s", dev->seq, dev->name); |
| |
| if (ethprime && dev == prime_dev) |
| printf(" [PRIME]"); |
| |
| eth_write_hwaddr(dev); |
| |
| uclass_next_device_check(&dev); |
| num_devices++; |
| } while (dev); |
| |
| putc('\n'); |
| } |
| |
| return num_devices; |
| } |
| |
| static int eth_post_bind(struct udevice *dev) |
| { |
| if (strchr(dev->name, ' ')) { |
| printf("\nError: eth device name \"%s\" has a space!\n", |
| dev->name); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int eth_pre_unbind(struct udevice *dev) |
| { |
| /* Don't hang onto a pointer that is going away */ |
| if (dev == eth_get_uclass_priv()->current) |
| eth_set_dev(NULL); |
| |
| return 0; |
| } |
| |
| static bool eth_dev_get_mac_address(struct udevice *dev, u8 mac[ARP_HLEN]) |
| { |
| #if IS_ENABLED(CONFIG_OF_CONTROL) |
| const uint8_t *p; |
| |
| p = dev_read_u8_array_ptr(dev, "mac-address", ARP_HLEN); |
| if (!p) |
| p = dev_read_u8_array_ptr(dev, "local-mac-address", ARP_HLEN); |
| |
| if (!p) |
| return false; |
| |
| memcpy(mac, p, ARP_HLEN); |
| |
| return true; |
| #else |
| return false; |
| #endif |
| } |
| |
| static int eth_post_probe(struct udevice *dev) |
| { |
| struct eth_device_priv *priv = dev->uclass_priv; |
| struct eth_pdata *pdata = dev->platdata; |
| unsigned char env_enetaddr[ARP_HLEN]; |
| |
| #if defined(CONFIG_NEEDS_MANUAL_RELOC) |
| struct eth_ops *ops = eth_get_ops(dev); |
| static int reloc_done; |
| |
| if (!reloc_done) { |
| if (ops->start) |
| ops->start += gd->reloc_off; |
| if (ops->send) |
| ops->send += gd->reloc_off; |
| if (ops->recv) |
| ops->recv += gd->reloc_off; |
| if (ops->free_pkt) |
| ops->free_pkt += gd->reloc_off; |
| if (ops->stop) |
| ops->stop += gd->reloc_off; |
| if (ops->mcast) |
| ops->mcast += gd->reloc_off; |
| if (ops->write_hwaddr) |
| ops->write_hwaddr += gd->reloc_off; |
| if (ops->read_rom_hwaddr) |
| ops->read_rom_hwaddr += gd->reloc_off; |
| |
| reloc_done++; |
| } |
| #endif |
| |
| priv->state = ETH_STATE_INIT; |
| |
| /* Check if the device has a valid MAC address in device tree */ |
| if (!eth_dev_get_mac_address(dev, pdata->enetaddr) || |
| !is_valid_ethaddr(pdata->enetaddr)) { |
| /* Check if the device has a MAC address in ROM */ |
| if (eth_get_ops(dev)->read_rom_hwaddr) |
| eth_get_ops(dev)->read_rom_hwaddr(dev); |
| } |
| |
| eth_env_get_enetaddr_by_index("eth", dev->seq, env_enetaddr); |
| if (!is_zero_ethaddr(env_enetaddr)) { |
| if (!is_zero_ethaddr(pdata->enetaddr) && |
| memcmp(pdata->enetaddr, env_enetaddr, ARP_HLEN)) { |
| printf("\nWarning: %s MAC addresses don't match:\n", |
| dev->name); |
| printf("Address in ROM is %pM\n", |
| pdata->enetaddr); |
| printf("Address in environment is %pM\n", |
| env_enetaddr); |
| } |
| |
| /* Override the ROM MAC address */ |
| memcpy(pdata->enetaddr, env_enetaddr, ARP_HLEN); |
| } else if (is_valid_ethaddr(pdata->enetaddr)) { |
| eth_env_set_enetaddr_by_index("eth", dev->seq, pdata->enetaddr); |
| printf("\nWarning: %s using MAC address from ROM\n", |
| dev->name); |
| } else if (is_zero_ethaddr(pdata->enetaddr) || |
| !is_valid_ethaddr(pdata->enetaddr)) { |
| #ifdef CONFIG_NET_RANDOM_ETHADDR |
| net_random_ethaddr(pdata->enetaddr); |
| printf("\nWarning: %s (eth%d) using random MAC address - %pM\n", |
| dev->name, dev->seq, pdata->enetaddr); |
| #else |
| printf("\nError: %s address not set.\n", |
| dev->name); |
| return -EINVAL; |
| #endif |
| } |
| |
| eth_write_hwaddr(dev); |
| |
| return 0; |
| } |
| |
| static int eth_pre_remove(struct udevice *dev) |
| { |
| struct eth_pdata *pdata = dev->platdata; |
| |
| eth_get_ops(dev)->stop(dev); |
| |
| /* clear the MAC address */ |
| memset(pdata->enetaddr, 0, ARP_HLEN); |
| |
| return 0; |
| } |
| |
| UCLASS_DRIVER(eth) = { |
| .name = "eth", |
| .id = UCLASS_ETH, |
| .post_bind = eth_post_bind, |
| .pre_unbind = eth_pre_unbind, |
| .post_probe = eth_post_probe, |
| .pre_remove = eth_pre_remove, |
| .priv_auto_alloc_size = sizeof(struct eth_uclass_priv), |
| .per_device_auto_alloc_size = sizeof(struct eth_device_priv), |
| .flags = DM_UC_FLAG_SEQ_ALIAS, |
| }; |