| /* |
| * Marvell MMC/SD/SDIO driver |
| * |
| * (C) Copyright 2012 |
| * Marvell Semiconductor <www.marvell.com> |
| * Written-by: Maen Suleiman, Gerald Kerma |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #include <common.h> |
| #include <malloc.h> |
| #include <part.h> |
| #include <mmc.h> |
| #include <asm/io.h> |
| #include <asm/arch/cpu.h> |
| #include <asm/arch/kirkwood.h> |
| #include <mvebu_mmc.h> |
| |
| #define DRIVER_NAME "MVEBU_MMC" |
| |
| static void mvebu_mmc_write(u32 offs, u32 val) |
| { |
| writel(val, CONFIG_SYS_MMC_BASE + (offs)); |
| } |
| |
| static u32 mvebu_mmc_read(u32 offs) |
| { |
| return readl(CONFIG_SYS_MMC_BASE + (offs)); |
| } |
| |
| static int mvebu_mmc_setup_data(struct mmc_data *data) |
| { |
| u32 ctrl_reg; |
| |
| debug("%s, data %s : blocks=%d blksz=%d\n", DRIVER_NAME, |
| (data->flags & MMC_DATA_READ) ? "read" : "write", |
| data->blocks, data->blocksize); |
| |
| /* default to maximum timeout */ |
| ctrl_reg = mvebu_mmc_read(SDIO_HOST_CTRL); |
| ctrl_reg |= SDIO_HOST_CTRL_TMOUT(SDIO_HOST_CTRL_TMOUT_MAX); |
| mvebu_mmc_write(SDIO_HOST_CTRL, ctrl_reg); |
| |
| if (data->flags & MMC_DATA_READ) { |
| mvebu_mmc_write(SDIO_SYS_ADDR_LOW, (u32)data->dest & 0xffff); |
| mvebu_mmc_write(SDIO_SYS_ADDR_HI, (u32)data->dest >> 16); |
| } else { |
| mvebu_mmc_write(SDIO_SYS_ADDR_LOW, (u32)data->src & 0xffff); |
| mvebu_mmc_write(SDIO_SYS_ADDR_HI, (u32)data->src >> 16); |
| } |
| |
| mvebu_mmc_write(SDIO_BLK_COUNT, data->blocks); |
| mvebu_mmc_write(SDIO_BLK_SIZE, data->blocksize); |
| |
| return 0; |
| } |
| |
| static int mvebu_mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, |
| struct mmc_data *data) |
| { |
| int timeout = 10; |
| ushort waittype = 0; |
| ushort resptype = 0; |
| ushort xfertype = 0; |
| ushort resp_indx = 0; |
| |
| debug("cmdidx [0x%x] resp_type[0x%x] cmdarg[0x%x]\n", |
| cmd->cmdidx, cmd->resp_type, cmd->cmdarg); |
| |
| udelay(10*1000); |
| |
| debug("%s: cmd %d (hw state 0x%04x)\n", DRIVER_NAME, |
| cmd->cmdidx, mvebu_mmc_read(SDIO_HW_STATE)); |
| |
| /* Checking if card is busy */ |
| while ((mvebu_mmc_read(SDIO_HW_STATE) & CARD_BUSY)) { |
| if (timeout == 0) { |
| printf("%s: card busy!\n", DRIVER_NAME); |
| return -1; |
| } |
| timeout--; |
| udelay(1000); |
| } |
| |
| /* Set up for a data transfer if we have one */ |
| if (data) { |
| int err = mvebu_mmc_setup_data(data); |
| |
| if (err) |
| return err; |
| } |
| |
| resptype = SDIO_CMD_INDEX(cmd->cmdidx); |
| |
| /* Analyzing resptype/xfertype/waittype for the command */ |
| if (cmd->resp_type & MMC_RSP_BUSY) |
| resptype |= SDIO_CMD_RSP_48BUSY; |
| else if (cmd->resp_type & MMC_RSP_136) |
| resptype |= SDIO_CMD_RSP_136; |
| else if (cmd->resp_type & MMC_RSP_PRESENT) |
| resptype |= SDIO_CMD_RSP_48; |
| else |
| resptype |= SDIO_CMD_RSP_NONE; |
| |
| if (cmd->resp_type & MMC_RSP_CRC) |
| resptype |= SDIO_CMD_CHECK_CMDCRC; |
| |
| if (cmd->resp_type & MMC_RSP_OPCODE) |
| resptype |= SDIO_CMD_INDX_CHECK; |
| |
| if (cmd->resp_type & MMC_RSP_PRESENT) { |
| resptype |= SDIO_UNEXPECTED_RESP; |
| waittype |= SDIO_NOR_UNEXP_RSP; |
| } |
| |
| if (data) { |
| resptype |= SDIO_CMD_DATA_PRESENT | SDIO_CMD_CHECK_DATACRC16; |
| xfertype |= SDIO_XFER_MODE_HW_WR_DATA_EN; |
| if (data->flags & MMC_DATA_READ) { |
| xfertype |= SDIO_XFER_MODE_TO_HOST; |
| waittype = SDIO_NOR_DMA_INI; |
| } else { |
| waittype |= SDIO_NOR_XFER_DONE; |
| } |
| } else { |
| waittype |= SDIO_NOR_CMD_DONE; |
| } |
| |
| /* Setting cmd arguments */ |
| mvebu_mmc_write(SDIO_ARG_LOW, cmd->cmdarg & 0xffff); |
| mvebu_mmc_write(SDIO_ARG_HI, cmd->cmdarg >> 16); |
| |
| /* Setting Xfer mode */ |
| mvebu_mmc_write(SDIO_XFER_MODE, xfertype); |
| |
| mvebu_mmc_write(SDIO_NOR_INTR_STATUS, ~SDIO_NOR_CARD_INT); |
| mvebu_mmc_write(SDIO_ERR_INTR_STATUS, SDIO_POLL_MASK); |
| |
| /* Sending command */ |
| mvebu_mmc_write(SDIO_CMD, resptype); |
| |
| mvebu_mmc_write(SDIO_NOR_INTR_EN, SDIO_POLL_MASK); |
| mvebu_mmc_write(SDIO_ERR_INTR_EN, SDIO_POLL_MASK); |
| |
| /* Waiting for completion */ |
| timeout = 1000000; |
| |
| while (!((mvebu_mmc_read(SDIO_NOR_INTR_STATUS)) & waittype)) { |
| if (mvebu_mmc_read(SDIO_NOR_INTR_STATUS) & SDIO_NOR_ERROR) { |
| debug("%s: error! cmdidx : %d, err reg: %04x\n", |
| DRIVER_NAME, cmd->cmdidx, |
| mvebu_mmc_read(SDIO_ERR_INTR_STATUS)); |
| if (mvebu_mmc_read(SDIO_ERR_INTR_STATUS) & |
| (SDIO_ERR_CMD_TIMEOUT | SDIO_ERR_DATA_TIMEOUT)) |
| return TIMEOUT; |
| return COMM_ERR; |
| } |
| |
| timeout--; |
| udelay(1); |
| if (timeout <= 0) { |
| printf("%s: command timed out\n", DRIVER_NAME); |
| return TIMEOUT; |
| } |
| } |
| |
| /* Handling response */ |
| if (cmd->resp_type & MMC_RSP_136) { |
| uint response[8]; |
| |
| for (resp_indx = 0; resp_indx < 8; resp_indx++) |
| response[resp_indx] |
| = mvebu_mmc_read(SDIO_RSP(resp_indx)); |
| |
| cmd->response[0] = ((response[0] & 0x03ff) << 22) | |
| ((response[1] & 0xffff) << 6) | |
| ((response[2] & 0xfc00) >> 10); |
| cmd->response[1] = ((response[2] & 0x03ff) << 22) | |
| ((response[3] & 0xffff) << 6) | |
| ((response[4] & 0xfc00) >> 10); |
| cmd->response[2] = ((response[4] & 0x03ff) << 22) | |
| ((response[5] & 0xffff) << 6) | |
| ((response[6] & 0xfc00) >> 10); |
| cmd->response[3] = ((response[6] & 0x03ff) << 22) | |
| ((response[7] & 0x3fff) << 8); |
| } else if (cmd->resp_type & MMC_RSP_PRESENT) { |
| uint response[3]; |
| |
| for (resp_indx = 0; resp_indx < 3; resp_indx++) |
| response[resp_indx] |
| = mvebu_mmc_read(SDIO_RSP(resp_indx)); |
| |
| cmd->response[0] = ((response[2] & 0x003f) << (8 - 8)) | |
| ((response[1] & 0xffff) << (14 - 8)) | |
| ((response[0] & 0x03ff) << (30 - 8)); |
| cmd->response[1] = ((response[0] & 0xfc00) >> 10); |
| cmd->response[2] = 0; |
| cmd->response[3] = 0; |
| } |
| |
| debug("%s: resp[0x%x] ", DRIVER_NAME, cmd->resp_type); |
| debug("[0x%x] ", cmd->response[0]); |
| debug("[0x%x] ", cmd->response[1]); |
| debug("[0x%x] ", cmd->response[2]); |
| debug("[0x%x] ", cmd->response[3]); |
| debug("\n"); |
| |
| return 0; |
| } |
| |
| static void mvebu_mmc_power_up(void) |
| { |
| debug("%s: power up\n", DRIVER_NAME); |
| |
| /* disable interrupts */ |
| mvebu_mmc_write(SDIO_NOR_INTR_EN, 0); |
| mvebu_mmc_write(SDIO_ERR_INTR_EN, 0); |
| |
| /* SW reset */ |
| mvebu_mmc_write(SDIO_SW_RESET, SDIO_SW_RESET_NOW); |
| |
| mvebu_mmc_write(SDIO_XFER_MODE, 0); |
| |
| /* enable status */ |
| mvebu_mmc_write(SDIO_NOR_STATUS_EN, SDIO_POLL_MASK); |
| mvebu_mmc_write(SDIO_ERR_STATUS_EN, SDIO_POLL_MASK); |
| |
| /* enable interrupts status */ |
| mvebu_mmc_write(SDIO_NOR_INTR_STATUS, SDIO_POLL_MASK); |
| mvebu_mmc_write(SDIO_ERR_INTR_STATUS, SDIO_POLL_MASK); |
| } |
| |
| static void mvebu_mmc_set_clk(unsigned int clock) |
| { |
| unsigned int m; |
| |
| if (clock == 0) { |
| debug("%s: clock off\n", DRIVER_NAME); |
| mvebu_mmc_write(SDIO_XFER_MODE, SDIO_XFER_MODE_STOP_CLK); |
| mvebu_mmc_write(SDIO_CLK_DIV, MVEBU_MMC_BASE_DIV_MAX); |
| } else { |
| m = MVEBU_MMC_BASE_FAST_CLOCK/(2*clock) - 1; |
| if (m > MVEBU_MMC_BASE_DIV_MAX) |
| m = MVEBU_MMC_BASE_DIV_MAX; |
| mvebu_mmc_write(SDIO_CLK_DIV, m & MVEBU_MMC_BASE_DIV_MAX); |
| } |
| |
| udelay(10*1000); |
| } |
| |
| static void mvebu_mmc_set_bus(unsigned int bus) |
| { |
| u32 ctrl_reg = 0; |
| |
| ctrl_reg = mvebu_mmc_read(SDIO_HOST_CTRL); |
| ctrl_reg &= ~SDIO_HOST_CTRL_DATA_WIDTH_4_BITS; |
| |
| switch (bus) { |
| case 4: |
| ctrl_reg |= SDIO_HOST_CTRL_DATA_WIDTH_4_BITS; |
| break; |
| case 1: |
| default: |
| ctrl_reg |= SDIO_HOST_CTRL_DATA_WIDTH_1_BIT; |
| } |
| |
| /* default transfer mode */ |
| ctrl_reg |= SDIO_HOST_CTRL_BIG_ENDIAN; |
| ctrl_reg &= ~SDIO_HOST_CTRL_LSB_FIRST; |
| |
| /* default to maximum timeout */ |
| ctrl_reg |= SDIO_HOST_CTRL_TMOUT(SDIO_HOST_CTRL_TMOUT_MAX); |
| |
| ctrl_reg |= SDIO_HOST_CTRL_PUSH_PULL_EN; |
| |
| ctrl_reg |= SDIO_HOST_CTRL_CARD_TYPE_MEM_ONLY; |
| |
| debug("%s: ctrl 0x%04x: %s %s %s\n", DRIVER_NAME, ctrl_reg, |
| (ctrl_reg & SDIO_HOST_CTRL_PUSH_PULL_EN) ? |
| "push-pull" : "open-drain", |
| (ctrl_reg & SDIO_HOST_CTRL_DATA_WIDTH_4_BITS) ? |
| "4bit-width" : "1bit-width", |
| (ctrl_reg & SDIO_HOST_CTRL_HI_SPEED_EN) ? |
| "high-speed" : ""); |
| |
| mvebu_mmc_write(SDIO_HOST_CTRL, ctrl_reg); |
| udelay(10*1000); |
| } |
| |
| static void mvebu_mmc_set_ios(struct mmc *mmc) |
| { |
| debug("%s: bus[%d] clock[%d]\n", DRIVER_NAME, |
| mmc->bus_width, mmc->clock); |
| mvebu_mmc_set_bus(mmc->bus_width); |
| mvebu_mmc_set_clk(mmc->clock); |
| } |
| |
| static int mvebu_mmc_initialize(struct mmc *mmc) |
| { |
| debug("%s: mvebu_mmc_initialize", DRIVER_NAME); |
| |
| /* |
| * Setting host parameters |
| * Initial Host Ctrl : Timeout : max , Normal Speed mode, |
| * 4-bit data mode, Big Endian, SD memory Card, Push_pull CMD Line |
| */ |
| mvebu_mmc_write(SDIO_HOST_CTRL, |
| SDIO_HOST_CTRL_TMOUT(SDIO_HOST_CTRL_TMOUT_MAX) | |
| SDIO_HOST_CTRL_DATA_WIDTH_4_BITS | |
| SDIO_HOST_CTRL_BIG_ENDIAN | |
| SDIO_HOST_CTRL_PUSH_PULL_EN | |
| SDIO_HOST_CTRL_CARD_TYPE_MEM_ONLY); |
| |
| mvebu_mmc_write(SDIO_CLK_CTRL, 0); |
| |
| /* enable status */ |
| mvebu_mmc_write(SDIO_NOR_STATUS_EN, SDIO_POLL_MASK); |
| mvebu_mmc_write(SDIO_ERR_STATUS_EN, SDIO_POLL_MASK); |
| |
| /* disable interrupts */ |
| mvebu_mmc_write(SDIO_NOR_INTR_EN, 0); |
| mvebu_mmc_write(SDIO_ERR_INTR_EN, 0); |
| |
| /* SW reset */ |
| mvebu_mmc_write(SDIO_SW_RESET, SDIO_SW_RESET_NOW); |
| |
| udelay(10*1000); |
| |
| return 0; |
| } |
| |
| static const struct mmc_ops mvebu_mmc_ops = { |
| .send_cmd = mvebu_mmc_send_cmd, |
| .set_ios = mvebu_mmc_set_ios, |
| .init = mvebu_mmc_initialize, |
| }; |
| |
| static struct mmc_config mvebu_mmc_cfg = { |
| .name = DRIVER_NAME, |
| .ops = &mvebu_mmc_ops, |
| .f_min = MVEBU_MMC_BASE_FAST_CLOCK / MVEBU_MMC_BASE_DIV_MAX, |
| .f_max = MVEBU_MMC_CLOCKRATE_MAX, |
| .voltages = MMC_VDD_32_33 | MMC_VDD_33_34, |
| .host_caps = MMC_MODE_4BIT | MMC_MODE_HS, |
| .part_type = PART_TYPE_DOS, |
| .b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT, |
| }; |
| |
| int mvebu_mmc_init(bd_t *bis) |
| { |
| struct mmc *mmc; |
| |
| mvebu_mmc_power_up(); |
| |
| mmc = mmc_create(&mvebu_mmc_cfg, bis); |
| if (mmc == NULL) |
| return -1; |
| |
| return 0; |
| } |