| #include <config.h> |
| |
| TRAP ta 0; nop; nop; nop; |
| |
| /* Software trap. Treat as BAD_TRAP for the time being... */ |
| #define SOFT_TRAP TRAP(_hwerr) |
| |
| #define PSR_INIT 0x1FC0 /* Disable traps, set s and ps */ |
| #define WIM_INIT 2 |
| |
| /* All traps low-level code here must end with this macro. */ |
| #define RESTORE_ALL b ret_trap_entry; clr %l6; |
| |
| #define WRITE_PAUSE nop;nop;nop |
| |
| WINDOWSIZE = (16 * 4) |
| ARGPUSHSIZE = (6 * 4) |
| ARGPUSH = (WINDOWSIZE + 4) |
| MINFRAME = (WINDOWSIZE + ARGPUSHSIZE + 4) |
| |
| /* Number of register windows */ |
| #ifndef CONFIG_SYS_SPARC_NWINDOWS |
| #error Must define number of SPARC register windows, default is 8 |
| #endif |
| |
| #define STACK_ALIGN 8 |
| #define SA(X) (((X)+(STACK_ALIGN-1)) & ~(STACK_ALIGN-1)) |
| |
| .section ".start", "ax" |
| .globl _starttate */ |
| #undef BAD_TRAP |
| #define BAD_TRAP ta 0; nop; nop; nop; |
| |
| /* Software trap. Treat as BAD_TRAP for the time being... */ |
| #define SOFT_TRAP TRAP(_hwerr) |
| |
| #define PSR_INIT 0x1FC0 /* Disable traps, set s and ps */ |
| #define WIM_INIT 2 |
| |
| /* All traps low-level code here must end with this macro. */ |
| #define RESTORE_ALL b ret_trap_entry; clr %l6; |
| |
| #define WRITE_PAUSE nop;nop;nop |
| |
| WINDOWSIZE = (16 * 4) |
| ARGPUSHSIZE = (6 * 4) |
| ARGPUSH = (WINDOWSIZE + 4) |
| MINFRAME = (WINDOWSIZE + ARGPUSHSIZE + 4) |
| |
| /* Number of register windows */ |
| #ifndef CONFIG_SYS_SPARC_NWINDOWS |
| #error Must define number of SPARC register windows, default is 8 |
| #endif |
| |
| #define STACK_ALIGN 8 |
| #define SA(X) (((X)+(STACK_ALIGN-1)) & ~(STACK_ALIGN-1)) |
| |
| .section ".start", "ax" |
| .globl _start, start, _trap_table |
| .globl _irq_entry, nmi_trap |
| .globl _reset_reloc |
| |
| /* at address 0 |
| * Hardware traps |
| */ |
| start: |
| _start: |
| _trap_table: |
| TRAPR(_hardreset); ! 00 reset trap |
| BAD_TRAP; ! 01 instruction_access_exception |
| BAD_TRAP; ! 02 illegal_instruction |
| BAD_TRAP; ! 03 priveleged_instruction |
| BAD_TRAP; ! 04 fp_disabled |
| TRAP(_window_overflow); ! 05 window_overflow |
| TRAP(_window_underflow); ! 06 window_underflow |
| BAD_TRAP; ! 07 Memory Address Not Aligned |
| BAD_TRAP; ! 08 Floating Point Exception |
| BAD_TRAP; ! 09 Data Miss Exception |
| BAD_TRAP; ! 0a Tagged Instruction Ovrflw |
| BAD_TRAP; ! 0b Watchpoint Detected |
| BAD_TRAP; ! 0c |
| BAD_TRAP; ! 0d |
| BAD_TRAP; ! 0e |
| BAD_TRAP; ! 0f |
| BAD_TRAP; ! 10 |
| TRAPI(1); ! 11 IRQ level 1 |
| TRAPI(2); ! 12 IRQ level 2 |
| TRAPI(3); ! 13 IRQ level 3 |
| TRAPI(4); ! 14 IRQ level 4 |
| TRAPI(5); ! 15 IRQ level 5 |
| TRAPI(6); ! 16 IRQ level 6 |
| TRAPI(7); ! 17 IRQ level 7 |
| TRAPI(8); ! 18 IRQ level 8 |
| TRAPI(9); ! 19 IRQ level 9 |
| TRAPI(10); ! 1a IRQ level 10 |
| TRAPI(11); ! 1b IRQ level 11 |
| TRAPI(12); ! 1c IRQ level 12 |
| TRAPI(13); ! 1d IRQ level 13 |
| TRAPI(14); ! 1e IRQ level 14 |
| TRAP(_nmi_trap); ! 1f IRQ level 15 / |
| ! NMI (non maskable interrupt) |
| BAD_TRAP; ! 20 r_register_access_error |
| BAD_TRAP; ! 21 instruction access error |
| BAD_TRAP; ! 22 |
| BAD_TRAP; ! 23 |
| BAD_TRAP; ! 24 co-processor disabled |
| BAD_TRAP; ! 25 uniplemented FLUSH |
| BAD_TRAP; ! 26 |
| BAD_TRAP; ! 27 |
| BAD_TRAP; ! 28 co-processor exception |
| BAD_TRAP; ! 29 data access error |
| BAD_TRAP; ! 2a division by zero |
| BAD_TRAP; ! 2b data store error |
| BAD_TRAP; ! 2c data access MMU miss |
| BAD_TRAP; ! 2d |
| BAD_TRAP; ! 2e |
| BAD_TRAP; ! 2f |
| BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 30-33 |
| BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 34-37 |
| BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 38-3b |
| BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 3c-3f |
| BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 40-43 |
| BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 44-47 |
| BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 48-4b |
| BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 4c-4f |
| BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 50-53 |
| BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 54-57 |
| BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 58-5b |
| BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 5c-5f |
| |
| /* implementaion dependent */ |
| BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 60-63 |
| BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 64-67 |
| BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 68-6b |
| BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 6c-6f |
| BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 70-73 |
| BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 74-77 |
| BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 78-7b |
| BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 7c-7f |
| |
| /* Software traps, not handled */ |
| SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! 80-83 |
| SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! 84-87 |
| SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! 88-8b |
| SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! 8c-8f |
| SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! 90-93 |
| SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! 94-97 |
| SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! 98-9b |
| SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! 9c-9f |
| SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! a0-a3 |
| SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! a4-a7 |
| SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! a8-ab |
| SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! ac-af |
| SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! b0-b3 |
| SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! b4-b7 |
| SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! b8-bb |
| SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! bc-bf |
| SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! c0-c3 |
| SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! c4-c7 |
| SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! c8-cb |
| SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! cc-cf |
| SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! d0-d3 |
| SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! d4-d7 |
| SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! d8-db |
| SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! dc-df |
| SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! e0-e3 |
| SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! e4-e7 |
| SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! e8-eb |
| SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! ec-ef |
| SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! f0-f3 |
| SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! f4-f7 |
| SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! f8-fb |
| SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! fc-ff |
| /* |
| * Version string |
| */ |
| |
| .data |
| .extern leon3_snooping_avail |
| .globl version_string |
| version_string: |
| .ascii U_BOOT_VERSION_STRING, "\0" |
| |
| .section ".text" |
| .align 4 |
| |
| _hardreset: |
| 1000: |
| flush |
| |
| /* Enable I/D-Cache and Snooping */ |
| set 0x0081000f, %g2 |
| sta %g2, [%g0] 2 |
| |
| mov %g0, %y |
| clr %g1 |
| clr %g2 |
| clr %g3 |
| clr %g4 |
| clr %g5 |
| clr %g6 |
| clr %g7 |
| |
| mov %asr17, %g3 |
| and %g3, 0x1f, %g3 |
| clear_window: |
| mov %g0, %l0 |
| mov %g0, %l1 |
| mov %g0, %l2 |
| mov %g0, %l3 |
| mov %g0, %l4 |
| mov %g0, %l5 |
| mov %g0, %l6 |
| mov %g0, %l7 |
| mov %g0, %o0 |
| mov %g0, %o1 |
| mov %g0, %o2 |
| mov %g0, %o3 |
| mov %g0, %o4 |
| mov %g0, %o5 |
| mov %g0, %o6 |
| mov %g0, %o7 |
| subcc %g3, 1, %g3 |
| bge clear_window |
| save |
| |
| wininit: |
| set WIM_INIT, %g3 |
| mov %g3, %wim |
| |
| stackp: |
| set CONFIG_SYS_INIT_SP_OFFSET, %fp |
| andn %fp, 0x0f, %fp |
| sub %fp, 64, %sp |
| |
| cpu_init_unreloc: |
| call cpu_init_f |
| nop |
| |
| /* un relocated start address of monitor */ |
| #define TEXT_START _text |
| |
| /* un relocated end address of monitor */ |
| #define DATA_END __init_end |
| |
| reloc: |
| set TEXT_START,%g2 |
| set DATA_END,%g3 |
| set CONFIG_SYS_RELOC_MONITOR_BASE,%g4 |
| reloc_loop: |
| ldd [%g2],%l0 |
| ldd [%g2+8],%l2 |
| std %l0,[%g4] |
| std %l2,[%g4+8] |
| inc 16,%g2 |
| subcc %g3,%g2,%g0 |
| bne reloc_loop |
| inc 16,%g4 |
| |
| clr %l0 |
| clr %l1 |
| clr %l2 |
| clr %l3 |
| clr %g2 |
| |
| /* register g4 contain address to start |
| * This means that BSS must be directly after data and code segments |
| * |
| * g3 is length of bss = (__bss_end-__bss_start) |
| * |
| */ |
| |
| clr_bss: |
| /* clear bss area (the relocated) */ |
| set __bss_start,%g2 |
| set __bss_end,%g3 |
| sub %g3,%g2,%g3 |
| add %g3,%g4,%g3 |
| clr %g1 /* std %g0 uses g0 and g1 */ |
| /* clearing 16byte a time ==> linker script need to align to 16 byte offset */ |
| clr_bss_16: |
| std %g0,[%g4] |
| std %g0,[%g4+8] |
| inc 16,%g4 |
| cmp %g3,%g4 |
| bne clr_bss_16 |
| nop |
| |
| /* add offsets to GOT table */ |
| fixup_got: |
| set __got_start,%g4 |
| set __got_end,%g3 |
| /* |
| * new got offset = (old GOT-PTR (read with ld) - |
| * CONFIG_SYS_RELOC_MONITOR_BASE(from define) ) + |
| * Destination Address (from define) |
| */ |
| set CONFIG_SYS_RELOC_MONITOR_BASE,%g2 |
| set TEXT_START, %g1 |
| add %g4,%g2,%g4 |
| sub %g4,%g1,%g4 |
| add %g3,%g2,%g3 |
| sub %g3,%g1,%g3 |
| sub %g2,%g1,%g2 ! prepare register with (new base address) - |
| ! (old base address) |
| got_loop: |
| ld [%g4],%l0 ! load old GOT-PTR |
| add %l0,%g2,%l0 ! increase with (new base address) - |
| ! (old base) |
| st %l0,[%g4] |
| inc 4,%g4 |
| cmp %g3,%g4 |
| bne got_loop |
| nop |
| |
| prom_relocate: |
| set __prom_start, %g2 |
| set __prom_end, %g3 |
| set CONFIG_SYS_PROM_OFFSET, %g4 |
| |
| prom_relocate_loop: |
| ldd [%g2],%l0 |
| ldd [%g2+8],%l2 |
| std %l0,[%g4] |
| std %l2,[%g4+8] |
| inc 16,%g2 |
| subcc %g3,%g2,%g0 |
| bne prom_relocate_loop |
| inc 16,%g4 |
| |
| /* Trap table has been moved, lets tell CPU about |
| * the new trap table address |
| */ |
| |
| set CONFIG_SYS_RELOC_MONITOR_BASE, %g2 |
| wr %g0, %g2, %tbr |
| nop |
| nop |
| nop |
| |
| /* If CACHE snooping is available in hardware the |
| * variable leon3_snooping_avail will be set to |
| * 0x800000 else 0. |
| */ |
| snoop_detect: |
| sethi %hi(0x00800000), %o0 |
| lda [%g0] 2, %o1 |
| and %o0, %o1, %o0 |
| sethi %hi(leon3_snooping_avail+CONFIG_SYS_RELOC_MONITOR_BASE-CONFIG_SYS_TEXT_BASE), %o1 |
| st %o0, [%lo(leon3_snooping_avail+CONFIG_SYS_RELOC_MONITOR_BASE-CONFIG_SYS_TEXT_BASE)+%o1] |
| |
| /* call relocate*/ |
| nop |
| /* Call relocated init functions */ |
| jump: |
| set cpu_init_f2,%o1 |
| set CONFIG_SYS_RELOC_MONITOR_BASE,%o2 |
| add %o1,%o2,%o1 |
| sub %o1,%g1,%o1 |
| call %o1 |
| clr %o0 |
| |
| set board_init_f,%o1 |
| set CONFIG_SYS_RELOC_MONITOR_BASE,%o2 |
| add %o1,%o2,%o1 |
| sub %o1,%g1,%o1 |
| call %o1 |
| clr %o0 |
| |
| dead: ta 0 ! if call returns... |
| nop |
| |
| /* Interrupt handler caller, |
| * reg L7: interrupt number |
| * reg L0: psr after interrupt |
| * reg L1: PC |
| * reg L2: next PC |
| * reg L3: wim |
| */ |
| _irq_entry: |
| SAVE_ALL |
| |
| or %l0, PSR_PIL, %g2 |
| wr %g2, 0x0, %psr |
| WRITE_PAUSE |
| wr %g2, PSR_ET, %psr |
| WRITE_PAUSE |
| mov %l7, %o0 ! irq level |
| set handler_irq, %o1 |
| set (CONFIG_SYS_RELOC_MONITOR_BASE-CONFIG_SYS_TEXT_BASE), %o2 |
| add %o1, %o2, %o1 |
| call %o1 |
| add %sp, SF_REGS_SZ, %o1 ! pt_regs ptr |
| or %l0, PSR_PIL, %g2 ! restore PIL after handler_irq |
| wr %g2, PSR_ET, %psr ! keep ET up |
| WRITE_PAUSE |
| |
| RESTORE_ALL |
| |
| !Window overflow trap handler. |
| .global _window_overflow |
| |
| _window_overflow: |
| |
| mov %wim, %l3 ! Calculate next WIM |
| mov %g1, %l7 |
| srl %l3, 1, %g1 |
| sll %l3, (CONFIG_SYS_SPARC_NWINDOWS-1) , %l4 |
| or %l4, %g1, %g1 |
| |
| save ! Get into window to be saved. |
| mov %g1, %wim |
| nop; |
| nop; |
| nop |
| st %l0, [%sp + 0]; |
| st %l1, [%sp + 4]; |
| st %l2, [%sp + 8]; |
| st %l3, [%sp + 12]; |
| st %l4, [%sp + 16]; |
| st %l5, [%sp + 20]; |
| st %l6, [%sp + 24]; |
| st %l7, [%sp + 28]; |
| st %i0, [%sp + 32]; |
| st %i1, [%sp + 36]; |
| st %i2, [%sp + 40]; |
| st %i3, [%sp + 44]; |
| st %i4, [%sp + 48]; |
| st %i5, [%sp + 52]; |
| st %i6, [%sp + 56]; |
| st %i7, [%sp + 60]; |
| restore ! Go back to trap window. |
| mov %l7, %g1 |
| jmp %l1 ! Re-execute save. |
| rett %l2 |
| |
| /* Window underflow trap handler. */ |
| |
| .global _window_underflow |
| |
| _window_underflow: |
| |
| mov %wim, %l3 ! Calculate next WIM |
| sll %l3, 1, %l4 |
| srl %l3, (CONFIG_SYS_SPARC_NWINDOWS-1), %l5 |
| or %l5, %l4, %l5 |
| mov %l5, %wim |
| nop; nop; nop |
| restore ! Two restores to get into the |
| restore ! window to restore |
| ld [%sp + 0], %l0; ! Restore window from the stack |
| ld [%sp + 4], %l1; |
| ld [%sp + 8], %l2; |
| ld [%sp + 12], %l3; |
| ld [%sp + 16], %l4; |
| ld [%sp + 20], %l5; |
| ld [%sp + 24], %l6; |
| ld [%sp + 28], %l7; |
| ld [%sp + 32], %i0; |
| ld [%sp + 36], %i1; |
| ld [%sp + 40], %i2; |
| ld [%sp + 44], %i3; |
| ld [%sp + 48], %i4; |
| ld [%sp + 52], %i5; |
| ld [%sp + 56], %i6; |
| ld [%sp + 60], %i7; |
| save ! Get back to the trap window. |
| save |
| jmp %l1 ! Re-execute restore. |
| rett %l2 |
| |
| retl |
| |
| _nmi_trap: |
| nop |
| jmp %l1 |
| rett %l2 |
| |
| _hwerr: |
| ta 0 |
| nop |
| nop |
| b _hwerr ! loop infinite |
| nop |
| |
| /* Registers to not touch at all. */ |
| #define t_psr l0 /* Set by caller */ |
| #define t_pc l1 /* Set by caller */ |
| #define t_npc l2 /* Set by caller */ |
| #define t_wim l3 /* Set by caller */ |
| #define t_twinmask l4 /* Set at beginning of this entry routine. */ |
| #define t_kstack l5 /* Set right before pt_regs frame is built */ |
| #define t_retpc l6 /* If you change this, change winmacro.h header file */ |
| #define t_systable l7 /* Never touch this, could be the syscall table ptr. */ |
| #define curptr g6 /* Set after pt_regs frame is built */ |
| |
| trap_setup: |
| /* build a pt_regs trap frame. */ |
| sub %fp, (SF_REGS_SZ + PT_REGS_SZ), %t_kstack |
| PT_STORE_ALL(t_kstack, t_psr, t_pc, t_npc, g2) |
| |
| /* See if we are in the trap window. */ |
| mov 1, %t_twinmask |
| sll %t_twinmask, %t_psr, %t_twinmask ! t_twinmask = (1 << psr) |
| andcc %t_twinmask, %t_wim, %g0 |
| beq 1f ! in trap window, clean up |
| nop |
| |
| /*------------------------------------------------- |
| * Spill , adjust %wim and go. |
| */ |
| srl %t_wim, 0x1, %g2 ! begin computation of new %wim |
| |
| set (CONFIG_SYS_SPARC_NWINDOWS-1), %g3 !NWINDOWS-1 |
| |
| sll %t_wim, %g3, %t_wim ! NWINDOWS-1 |
| or %t_wim, %g2, %g2 |
| and %g2, 0xff, %g2 |
| |
| save %g0, %g0, %g0 ! get in window to be saved |
| |
| /* Set new %wim value */ |
| wr %g2, 0x0, %wim |
| |
| /* Save the kernel window onto the corresponding stack. */ |
| RW_STORE(sp) |
| |
| restore %g0, %g0, %g0 |
| /*-------------------------------------------------*/ |
| |
| 1: |
| /* Trap from kernel with a window available. |
| * Just do it... |
| */ |
| jmpl %t_retpc + 0x8, %g0 ! return to caller |
| mov %t_kstack, %sp ! jump onto new stack |
| |
| #define twin_tmp1 l4 |
| #define glob_tmp g4 |
| #define curptr g6 |
| ret_trap_entry: |
| wr %t_psr, 0x0, %psr ! enable nesting again, clear ET |
| |
| /* Will the rett land us in the invalid window? */ |
| mov 2, %g1 |
| sll %g1, %t_psr, %g1 |
| |
| set CONFIG_SYS_SPARC_NWINDOWS, %g2 !NWINDOWS |
| |
| srl %g1, %g2, %g2 |
| or %g1, %g2, %g1 |
| rd %wim, %g2 |
| andcc %g2, %g1, %g0 |
| be 1f ! Nope, just return from the trap |
| sll %g2, 0x1, %g1 |
| |
| /* We have to grab a window before returning. */ |
| set (CONFIG_SYS_SPARC_NWINDOWS-1), %g3 !NWINDOWS-1 |
| |
| srl %g2, %g3, %g2 |
| or %g1, %g2, %g1 |
| and %g1, 0xff, %g1 |
| |
| wr %g1, 0x0, %wim |
| |
| /* Grrr, make sure we load from the right %sp... */ |
| PT_LOAD_ALL(sp, t_psr, t_pc, t_npc, g1) |
| |
| restore %g0, %g0, %g0 |
| RW_LOAD(sp) |
| b 2f |
| save %g0, %g0, %g0 |
| |
| /* Reload the entire frame in case this is from a |
| * kernel system call or whatever... |
| */ |
| 1: |
| PT_LOAD_ALL(sp, t_psr, t_pc, t_npc, g1) |
| 2: |
| wr %t_psr, 0x0, %psr |
| nop; |
| nop; |
| nop |
| |
| jmp %t_pc |
| rett %t_npc |
| |
| /* This is called from relocated C-code. |
| * It resets the system by jumping to _start |
| */ |
| _reset_reloc: |
| set start, %l0 |
| call %l0 |
| nop |