| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright (C) 2017 Linaro |
| * Bryan O'Donoghue <bryan.odonoghue@linaro.org> |
| */ |
| |
| #include <common.h> |
| #include <image.h> |
| #include <log.h> |
| #include <malloc.h> |
| #include <linux/libfdt.h> |
| #include <tee/optee.h> |
| |
| #define optee_hdr_err_msg \ |
| "OPTEE verification error:" \ |
| "\n\thdr=%p image=0x%08lx magic=0x%08x tzdram 0x%08lx-0x%08lx " \ |
| "\n\theader lo=0x%08x hi=0x%08x size=0x%08lx arch=0x%08x" \ |
| "\n\tuimage params 0x%08lx-0x%08lx\n" |
| |
| int optee_verify_image(struct optee_header *hdr, unsigned long tzdram_start, |
| unsigned long tzdram_len, unsigned long image_len) |
| { |
| unsigned long tzdram_end = tzdram_start + tzdram_len; |
| uint32_t tee_file_size; |
| |
| tee_file_size = hdr->init_size + hdr->paged_size + |
| sizeof(struct optee_header); |
| |
| if (hdr->magic != OPTEE_MAGIC || |
| hdr->version != OPTEE_VERSION || |
| hdr->init_load_addr_hi > tzdram_end || |
| hdr->init_load_addr_lo < tzdram_start || |
| tee_file_size > tzdram_len || |
| tee_file_size != image_len || |
| (hdr->init_load_addr_lo + tee_file_size) > tzdram_end) { |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| int optee_verify_bootm_image(unsigned long image_addr, |
| unsigned long image_load_addr, |
| unsigned long image_len) |
| { |
| struct optee_header *hdr = (struct optee_header *)image_addr; |
| unsigned long tzdram_start = CONFIG_OPTEE_TZDRAM_BASE; |
| unsigned long tzdram_len = CONFIG_OPTEE_TZDRAM_SIZE; |
| |
| int ret; |
| |
| ret = optee_verify_image(hdr, tzdram_start, tzdram_len, image_len); |
| if (ret) |
| goto error; |
| |
| if (image_load_addr + sizeof(*hdr) != hdr->init_load_addr_lo) { |
| ret = -EINVAL; |
| goto error; |
| } |
| |
| return ret; |
| error: |
| printf(optee_hdr_err_msg, hdr, image_addr, hdr->magic, tzdram_start, |
| tzdram_start + tzdram_len, hdr->init_load_addr_lo, |
| hdr->init_load_addr_hi, image_len, hdr->arch, image_load_addr, |
| image_load_addr + image_len); |
| |
| return ret; |
| } |
| |
| #if defined(CONFIG_OF_LIBFDT) |
| static int optee_copy_firmware_node(const void *old_blob, void *fdt_blob) |
| { |
| int old_offs, offs, ret, len; |
| const void *prop; |
| |
| old_offs = fdt_path_offset(old_blob, "/firmware/optee"); |
| if (old_offs < 0) { |
| debug("Original OP-TEE Device Tree node not found"); |
| return old_offs; |
| } |
| |
| offs = fdt_path_offset(fdt_blob, "/firmware"); |
| if (offs < 0) { |
| offs = fdt_path_offset(fdt_blob, "/"); |
| if (offs < 0) |
| return offs; |
| |
| offs = fdt_add_subnode(fdt_blob, offs, "firmware"); |
| if (offs < 0) |
| return offs; |
| } |
| |
| offs = fdt_add_subnode(fdt_blob, offs, "optee"); |
| if (offs < 0) |
| return offs; |
| |
| /* copy the compatible property */ |
| prop = fdt_getprop(old_blob, old_offs, "compatible", &len); |
| if (!prop) { |
| debug("missing OP-TEE compatible property"); |
| return -EINVAL; |
| } |
| |
| ret = fdt_setprop(fdt_blob, offs, "compatible", prop, len); |
| if (ret < 0) |
| return ret; |
| |
| /* copy the method property */ |
| prop = fdt_getprop(old_blob, old_offs, "method", &len); |
| if (!prop) { |
| debug("missing OP-TEE method property"); |
| return -EINVAL; |
| } |
| |
| ret = fdt_setprop(fdt_blob, offs, "method", prop, len); |
| if (ret < 0) |
| return ret; |
| |
| return 0; |
| } |
| |
| int optee_copy_fdt_nodes(const void *old_blob, void *new_blob) |
| { |
| int nodeoffset, subnode, ret; |
| struct fdt_resource res; |
| |
| if (fdt_check_header(old_blob)) |
| return -EINVAL; |
| |
| if (fdt_check_header(new_blob)) |
| return -EINVAL; |
| |
| /* only proceed if there is an /firmware/optee node */ |
| if (fdt_path_offset(old_blob, "/firmware/optee") < 0) { |
| debug("No OP-TEE firmware node in old fdt, nothing to do"); |
| return 0; |
| } |
| |
| /* |
| * Do not proceed if the target dt already has an OP-TEE node. |
| * In this case assume that the system knows better somehow, |
| * so do not interfere. |
| */ |
| if (fdt_path_offset(new_blob, "/firmware/optee") >= 0) { |
| debug("OP-TEE Device Tree node already exists in target"); |
| return 0; |
| } |
| |
| ret = optee_copy_firmware_node(old_blob, new_blob); |
| if (ret < 0) { |
| printf("Failed to add OP-TEE firmware node\n"); |
| return ret; |
| } |
| |
| /* optee inserts its memory regions as reserved-memory nodes */ |
| nodeoffset = fdt_subnode_offset(old_blob, 0, "reserved-memory"); |
| if (nodeoffset >= 0) { |
| subnode = fdt_first_subnode(old_blob, nodeoffset); |
| while (subnode >= 0) { |
| const char *name = fdt_get_name(old_blob, |
| subnode, NULL); |
| if (!name) |
| return -EINVAL; |
| |
| /* only handle optee reservations */ |
| if (strncmp(name, "optee", 5)) |
| continue; |
| |
| /* check if this subnode has a reg property */ |
| ret = fdt_get_resource(old_blob, subnode, "reg", 0, |
| &res); |
| if (!ret) { |
| struct fdt_memory carveout = { |
| .start = res.start, |
| .end = res.end, |
| }; |
| char *oldname, *nodename, *tmp; |
| |
| oldname = strdup(name); |
| if (!oldname) |
| return -ENOMEM; |
| |
| tmp = oldname; |
| nodename = strsep(&tmp, "@"); |
| if (!nodename) { |
| free(oldname); |
| return -EINVAL; |
| } |
| |
| ret = fdtdec_add_reserved_memory(new_blob, |
| nodename, |
| &carveout, |
| NULL); |
| free(oldname); |
| |
| if (ret < 0) |
| return ret; |
| } |
| |
| subnode = fdt_next_subnode(old_blob, subnode); |
| } |
| } |
| |
| return 0; |
| } |
| #endif |