| commit 260421a21e934a68d31fb6125b0fbd2631a8ca20 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Nov 13 13:55:24 2006 +0100 |
| |
| [PATCH] CFI driver AMD Command Set Top boot geometry reversal, etc. [Updated] |
| |
| * Adds support for AMD command set Top Boot flash geometry reversal |
| * Adds support for reading JEDEC Manufacturer ID and Device ID |
| * Adds support for displaying command set, manufacturer id and |
| device ids (flinfo) |
| * Makes flinfo output to be consistent when CFG_FLASH_EMPTY_INFO defined |
| * Removes outdated change history (refer to git log instead) |
| |
| Signed-off-by: Tolunay Orkun <listmember@orkun.us> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit b21b511d4c50408f4853f46f06b601272196223f |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Sun Nov 12 21:13:23 2006 +0100 |
| |
| Update CHANGELOG |
| |
| commit ce3f1a40c507afbab06c5eb58ccdc6713eda3245 |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Sat Nov 11 22:48:22 2006 +0100 |
| |
| Disable the watchdog in the default config for the V38B board. |
| |
| commit 44a47e6db2694841211f1c8fdbafd36992e9cd1a |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Sat Nov 11 22:43:00 2006 +0100 |
| |
| Change the GPIO pin multiplexing configuration for V38B. The USB GPIO pin |
| group is enabled for USB earlier (in cpu_init_f() instead of |
| usb_lowlevel_init()). |
| |
| commit 91650b3e4de688038d4f71279c44858e3e2c6870 |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Mon Nov 6 17:06:36 2006 +0100 |
| |
| Sequential accesses to non-existent memory must be synchronized, |
| at least on G2 cores. |
| |
| This fixes get_ram_size() problems on MPC5200 Rev. B boards. |
| |
| commit c59200443072353044aa4bf737a5a60f9a9af231 |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Thu Nov 2 15:15:01 2006 +0100 |
| |
| Release U-Boot 1.1.6 |
| |
| commit 25721b5cec2be4bce79cfade17ec8f6aa1e67526 |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Wed Nov 1 02:04:38 2006 +0100 |
| |
| Finish up support for MarelV38B board |
| - add watchdog support |
| - enable GPIO_WKUP_7 pin for input |
| - code cleanup |
| |
| commit ffa150bc90c943ca265170bd1be3f293674dd5c7 |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Wed Nov 1 01:45:46 2006 +0100 |
| |
| - Fix issues related to the use of ELDK 4 when compiling for MarelV38B: |
| * remove warnings when compiling ethaddr.c |
| * adjust linker script (fixes a crash resulting from incorrect |
| definition of __u_boot_cmd_start) |
| - Some MarelV38B code cleanup. |
| |
| commit dae80f3caf9754a6dd3ddf3cf903d0c46cbd4385 |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Wed Nov 1 01:38:16 2006 +0100 |
| |
| - Add MPC5XXX register definition MPC5XXX_WU_GPIO_DATA_I and change the |
| MPC5XXX_WU_GPIO_DATA macro to MPC5XXX_WU_GPIO_DATA_O (per MPC5200 User's |
| Manual). Replace the uses of MPC5XXX_WU_GPIO_DATA with |
| MPC5XXX_WU_GPIO_DATA_O for affected boards. |
| |
| - Add defintions for some MPC5XXX GPIO pins. |
| |
| commit 82d9c9ec29a1bec1b03ba616425ebaed231072c8 |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Wed Nov 1 01:34:29 2006 +0100 |
| |
| Changed MarelV38B board make target to lowercase. Config file cleanup. |
| |
| commit 1954be6e9c9421b45d0a9d05b10356acc7563150 |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Sun Oct 29 01:03:51 2006 +0200 |
| |
| Automatically adjust ARFLAGS so "make -s" is really silent. |
| |
| commit fae684e89844856383bdf101440889557df3e6b1 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sat Oct 28 16:45:00 2006 +0200 |
| |
| [PATCH] omap925.c: Remove unused functions |
| |
| Signed-off-by: Ladislav Michl <ladis@linux-mips.org> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 1265581502ab8ea8c08e8edbe9bf64fbd62fd776 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sat Oct 28 17:12:58 2006 +0200 |
| |
| [PATCH] Add some missing machtypes for netstar & voiceblue boards |
| |
| Use MACH_TYPE_NETSTAR and MACH_TYPE_VOICEBLUE defines instead of |
| numbers in code. |
| |
| Signed-off-by: Ladislav Michl <ladis@linux-mips.org> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 856f054410cef52d868feb330168b2a4c4091328 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sat Oct 28 15:55:52 2006 +0200 |
| |
| [PATCH] NAND: Partition name support added to NAND subsystem |
| |
| chpart, nboot and NAND subsystem related commands now accept also partition |
| name to specify offset. |
| |
| Signed-off-by: Ladislav Michl <ladis@linux-mips.org> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 07a69a18c2ecfda904231fdf23e2523ea7792eb6 |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Sat Oct 28 02:29:44 2006 +0200 |
| |
| Update CHANGELOG. |
| |
| commit 2751a95abd1b96911081c357e96a12fa97b40dee |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Sat Oct 28 02:29:14 2006 +0200 |
| |
| Enable commandline editing and hush shell on all TQM boards. |
| |
| commit 8078f1a5f63a739b8533478f6c2b62fb1e2f79d7 |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Sat Oct 28 02:28:02 2006 +0200 |
| |
| README says CFG_AUTO_COMPLETE, but ocde uses CONFIG_AUTO_COMPLETE |
| |
| commit 471a7be7a042e95e440f5de969c9765214ae8d6e |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sat Oct 28 01:14:32 2006 +0200 |
| |
| Check for illegal character '=' in environment variable names. |
| |
| Make sure the string passed as variable name does not contain a '=' |
| character. This not only prevents the common error or typing |
| "setenv foo=bar" instead of "setenv foo bar", but (more importantly) |
| also closes a backdoor which allowed to delete write-protected |
| environment variables, for example by using "setenv ethaddr=". |
| |
| commit 19973b6ad9863a56f5c5fbcfd90e20ab2490a2c2 |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Sat Oct 28 00:38:39 2006 +0200 |
| |
| Minor code cleanup. |
| |
| commit e11887a77d81077416a2d1c5e0354916fee8c034 |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Thu Oct 26 17:55:31 2006 +0200 |
| |
| Don't pass any debug options directly to the assembler |
| |
| When passing the -g option to gcc, gcc automatically selects a |
| suitable --g<format> option to pass on to the assembler. |
| Thus, there's no point in forcing a specific debug option on the |
| assembler using the -Wa mechanism. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit ea08ff6e14f9ebb8c07cfa79c51ef540eb087393 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Fri Oct 27 07:47:22 2006 -0500 |
| |
| MPC86xx: Cleaned up unused and conditionally used local variables. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit d38936cdae46bfd2623ff83f6ce9b616d36ab0f9 |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Fri Oct 27 11:55:21 2006 +0200 |
| |
| Fix "ar" flags in some Makefiles to allow for silent "make -s" |
| |
| commit 4653f91c13ed51c21cc4c3855745d69a3fb1817f |
| Author: Ben Warren <bwarren@qstreams.com> |
| Date: Thu Oct 26 14:38:25 2006 -0400 |
| |
| Fix TSEC driver (now for real): avoid crashes if PHY is not attached |
| to a TSEC (e.g. a switch is connected via RMII) or |
| if the PHY is defective/incorrectly configured. |
| |
| Signed-off-by: Ben Warren <bwarren@qstreams.com> |
| |
| commit b985b5d6e4fb88f508f7aa0f126c2e27ada2b999 |
| Author: Ben Warren <bwarren@qstreams.com> |
| Date: Thu Oct 26 14:38:25 2006 -0400 |
| |
| Fix TSEC driver: avoid crashes if PHY is not attached |
| to a TSEC (e.g. a switch is connected via RMII) or |
| if the PHY is defective/incorrectly configured. |
| |
| Signed-off-by: Ben Warren <bwarren@qstreams.com> |
| |
| commit 2b2a40bebbf1822506e80e631d7253e60f0e0fe6 |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Thu Oct 26 16:24:31 2006 +0200 |
| |
| Code cleanup. |
| |
| commit 5e3b0bc19f07ed277d85324ad0427642c8981baf |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Wed Oct 25 15:48:59 2006 +0200 |
| |
| Finish up support for the ATSTK1000/ATSTK1002 boards |
| |
| Add atstk1002_config target to Makefile and move the AVR32 section |
| down below Blackfin so that it doesn't end up in the middle of |
| MIPS. |
| |
| Drop the autogenerated linker script thing for now. Will have to |
| revisit how to handle chips with different flash and RAM layout |
| later. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit c76f951a747cfb87ba826ef45b5aea82d5b5dbb4 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Tue Oct 24 23:47:37 2006 -0500 |
| |
| Added support for Multi-Image files that contain a device tree |
| |
| If a Multi-Image file contains a third image we try to use it as a |
| device tree. The device tree image is assumed to be uncompressed in the |
| image file. We automatically allocate space for the device tree in memory |
| and provide an 8k pad to allow more than a reasonable amount of growth. |
| |
| Additionally, a device tree that was contained in flash will now automatically |
| get copied to system memory as part of boot. Previously an error was |
| reported if one tried to boot a device tree that was in flash. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 7c52c4b943ff52bbe8796a7e2d3e476ceaf3f512 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Tue Oct 24 21:35:55 2006 +0200 |
| |
| Switch to automatically generated CHANGELOG file. |
| (use "make CHANGELOG" to update it from time to time) |
| |
| commit 7ade0c634a979c32fa91a74e8f5775f24651fbe6 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Oct 24 18:06:48 2006 +0200 |
| |
| Fix bug in PPC440 NAND driver cpu/ppc4xx/ndfc.c |
| Patch by Stefan Roese, 24 Oct 2006 |
| |
| commit 8ae3b713b2286e0c3213b7802062e4c1599010de |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Tue Oct 24 17:24:55 2006 +0200 |
| |
| Merge with /home/wd/git/u-boot/master |
| |
| commit 47a6989c10685d2ab3efcf95228ce50d2a496d3e |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Tue Oct 24 15:32:57 2006 +0200 |
| |
| Code cleanup |
| |
| commit 3a78e3e75b633ecb6413114ffd11e2f000c4f11e |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Tue Oct 24 14:51:36 2006 +0200 |
| |
| Move atstk1000 files into vendor specific directory. |
| Patch by Haavard Skinnemoen, 12 Sep 2006 |
| |
| commit 6ccec4492e77428fd6eafd3dfe94fbdf08e91d37 |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Tue Oct 24 14:42:37 2006 +0200 |
| |
| Add ATSTK1000 and ATSTK1002 board support |
| Patch by Haavard Skinnemoen, 06 Sep 2006 |
| |
| This patch adds support for the ATSTK1000 with the ATSTK1002 CPU |
| daughterboard. |
| |
| ATSTK1000 is a full-featured development board for AT32AP CPUs. It |
| has two ethernet ports, a high quality QVGA LCD panel, a loudspeaker, |
| and connectors for USART, PS/2, VGA, USB, MMC/SD cards and |
| CompactFlash cards. For more information, please see this page: |
| |
| http://www.atmel.com/dyn/products/tools.asp?family_id=682 |
| |
| The ATSTK1002 is a daughterboard for the ATSTK1000 supporting the |
| AT32AP7000 chip. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit f93ae788c3640fcde5db383471d45548ff4060d0 |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Tue Oct 24 14:31:24 2006 +0200 |
| |
| Add common serial driver for Atmel AT32 and AT91 chips |
| Patch by Haavard Skinnemoen, 06 Sep 2006 |
| |
| This is a first attempt at creating a common serial driver for Atmel |
| chips. For now, it supports the AT32AP7000 AVR32 chip, but it should |
| be possible to support AT91RM9200 and other ARM-based chips with some |
| minor modifications. |
| |
| There's nothing fundamentally AVR32-specific in this driver, but it |
| does use some features which are currently only defined for the |
| AT32AP CPU port: |
| * pm_get_clock_freq: Obtain the clock frequency of a given domain |
| * gd->console_uart: A "struct device" containing information about |
| register mappings, gpio resources and clocks associated with the |
| UART device. |
| |
| For more information about these features, please see the "AT32AP |
| CPU" patch. |
| |
| commit 72a087e04705c26cad982879ebd06b5281bf825a |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Tue Oct 24 14:27:35 2006 +0200 |
| |
| Add AT32AP CPU and AT32AP7000 SoC support |
| Patch by Haavard Skinnemoen, 06 Sep 2006 |
| |
| This patch adds support for the AT32AP CPU family and the AT32AP7000 |
| chip, which is the first chip implementing the AVR32 architecture. |
| |
| The AT32AP CPU core is a high-performance implementation featuring a |
| 7-stage pipeline, separate instruction- and data caches, and a MMU. |
| For more information, please see the "AVR32 AP Technical Reference": |
| |
| http://www.atmel.com/dyn/resources/prod_documents/doc32001.pdf |
| |
| In addition to this, the AT32AP7000 chip comes with a large set of |
| integrated peripherals, many of which are shared with the AT91 series |
| of ARM-based microcontrollers from Atmel. Full data sheet is |
| available here: |
| |
| http://www.atmel.com/dyn/resources/prod_documents/doc32003.pdf |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit 7b64fef33c66be648826c0ff9758298ef13d0604 |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Tue Oct 24 14:21:16 2006 +0200 |
| |
| Add AVR32 architecture support |
| Patch by Haavard Skinnemoen, 6 Sep 2006 16:23:02 +0200 |
| |
| This patch adds common infrastructure code for the Atmel AVR32 |
| architecture. See doc/README.AVR32 for details. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit 2da2d9a4766063b9848f3a35ad6025499cf87265 |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Tue Oct 24 13:57:33 2006 +0200 |
| |
| Use -g instead of -gstabs in AFLAGS_DEBUG |
| Patch by Haavard Skinnemoen, 30 Aug 2006 |
| |
| In config.mk, -Wa,-gstabs is unconditionally appended to AFLAGS no |
| matter what the target's preferred debugging format is. This patch |
| simply replaces -gstabs with -g, so that the default debugging format |
| for the architecture is used. |
| |
| commit 965829872169c2996023840d98e1d85ad148d629 |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Tue Oct 24 13:55:18 2006 +0200 |
| |
| Fix/workaround broken dependency handling with make 3.81 |
| Based on patch by Haavard Skinnemoen, 29 Aug 2006 11:20:39 +0200 |
| |
| commit 8318fbf8cc30418b621ea9f39b84b4c1a08f003a |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Mon Oct 23 22:17:05 2006 +0200 |
| |
| Fix sequoia separate object direcory building problems. |
| |
| commit 3dfa9cfdcee78b30da3432318b32821ffabe974b |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Fri Oct 20 17:16:35 2006 -0500 |
| |
| Use generic I2C register block on 85xx and 86xx. |
| |
| Replace private IMMAP I2C structures with generic reg block |
| and allow 86xx to have multiple I2C device busses. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit f5012827df11ca0c9be1df5f8b153e188dc2fa7c |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Fri Oct 20 15:54:34 2006 -0500 |
| |
| Fix compilation warnings on a few 85xx boards. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 2047672684cf85cb6f96a1fbc993180aaaf19a99 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Fri Oct 20 15:50:15 2006 -0500 |
| |
| Converted all 85xx boards to use a common FSL I2C driver. |
| Introduced COFIG_FSL_I2C to select the common FSL I2C driver. |
| And removed hard i2c path from a few u-boot.lds scipts too. |
| Minor whitespace cleanups along the way. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 4d45f69e362b05892c9e92a7907e5820995612aa |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Thu Oct 19 12:02:24 2006 -0500 |
| |
| Rewrite a series of goto statements as a sequences of |
| conditional expressions instead. |
| |
| Use consistent return code 0/-1 for good/bad indicators. |
| |
| Include one fewer file if the driver isn't used at all. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 7237c033b02fe295880435f1eb80819a0c987532 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Thu Oct 19 11:02:16 2006 -0500 |
| |
| Moved i2c driver out of cpu/mpc86xx/i2c.c into drivers/fsl_i2c.c |
| |
| in an effort to begin to unify the umpteen FSL I2C drivers that |
| are all otherwise very similar. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 13a7fcdf37f6ea9429ae04c9df67f893364cfe4b |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Thu Oct 19 11:33:52 2006 -0500 |
| |
| * Fix a bunch of compiler warnings for gcc 4.0 |
| |
| Signed-off-by: Matthew McClintock <msm@freescale.com> |
| |
| commit af9e1f5b9e6f9ce810f5e8bf2961c9542a5865c2 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Oct 17 06:14:31 2006 +0200 |
| |
| Add monitor functions for indirect access to PPC440 DCR's |
| Patch by Leonid Baryudin, 12 Oct 2006 |
| |
| commit 5f3249a0a168e446a4cc9669b2bce0bc456f0a09 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Fri Oct 13 16:47:53 2006 -0500 |
| |
| Fixed leading whitespace issues. |
| Removed spurious LAWAR thing. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 0ee90cb77e01d6e8ccd37e1bd96678597875c391 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Thu Oct 12 10:42:36 2006 -0500 |
| |
| Remove unneeded include files and local variable. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 1eaf3a5ff4960a46f3a9063568ba2af7883f07c5 |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Tue Oct 10 00:23:32 2006 -0600 |
| |
| Fix possible uninitialized variable compiler warning. |
| |
| When CONFIG_OF_FLAG_TREE is set, the compiler complains that 'len' in |
| do_bootm_linux() may be uninitialized. There is no possibility in the |
| current code that len will get used uninitialized, but this fix follows |
| the existing convention of setting both len and data to zero at the same |
| time. |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 7376eb87aaa601f728f9b8e5e9cd2711a67f529e |
| Author: Matthew McClintock <msm@freescale.com> |
| Date: Wed Oct 11 15:13:01 2006 -0500 |
| |
| * Fix a bunch of compiler warnings for gcc 4.0 |
| |
| Signed-off-by: Matthew McClintock <msm@freescale.com> |
| |
| commit bf651baa365e5447246aad6a633ccd667cf24a39 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Wed Oct 11 10:10:43 2006 -0500 |
| |
| Move "ar" flags to config.mk to allow for silent "make -s" |
| |
| commit 1fd5699a4a24f5c1dab1b32f480bace1ebb9fc3e |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Oct 10 17:19:03 2006 -0500 |
| |
| Coding style changes to remove local varible blocks |
| and reformat a bit nicer. |
| |
| commit 8b283dbb3a08d1b8d406bc15f119e081b3e2606a |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Oct 10 17:16:04 2006 -0500 |
| |
| Fix whitespace issues. |
| |
| commit 7b382b7125f2397cce63253df62f183e3dfa2770 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Oct 10 17:14:45 2006 -0500 |
| |
| Fix whitespace issues. |
| |
| commit e10390ddd736b0dad1528eec4b0fe35c0827139a |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Oct 10 17:06:53 2006 -0500 |
| |
| Fix whitespace issues. |
| |
| commit 89875e96ba3f023157bf50d5f8e33bf254964a76 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Oct 10 17:03:43 2006 -0500 |
| |
| Ran lindent and cleaned up whitespace issues. |
| Format for 80-columns too. |
| |
| commit 333961ae7095fc66d8a041fce1ac9ee873b09d86 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Oct 10 17:02:22 2006 -0500 |
| |
| Fix whitespace and 80-col issues. |
| |
| commit f55df18187e7a45cb73fec4370d12135e6691ae1 |
| Author: John Traill <john.traill@freescale.com> |
| Date: Fri Sep 29 08:23:12 2006 +0100 |
| |
| Fix missing tCycle/modfreq calculation. |
| |
| Signed-off-by: John Traill <john.traill@freescale.com> |
| |
| commit 8272dc2f58f2473d8995fcc9b916440cfba080f0 |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Wed Sep 13 10:33:35 2006 -0500 |
| |
| Updated config headers to add default FDT-based booting |
| |
| commit 09f3e09e9ebcfa7919ca8931a4b5504fadd1f1d3 |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Wed Sep 13 10:34:18 2006 -0500 |
| |
| Add support for eTSEC 3 & 4 on 8548 CDS |
| |
| * Added support for using eTSEC 3 and eTSEC 4 on the 8548 CDS. |
| This will only work on rev 1.3 boards (but doesn't break older boards) |
| * Cleaned up some comments to reflect the expanded role of tsec |
| in other systems |
| |
| commit 084d648b109c8984f83674043c1a7fa3885ef801 |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Wed Sep 13 10:33:56 2006 -0500 |
| |
| Added code to support 2.6.18 PCI changes in u-boot |
| |
| * Added code to swizzle the IRQ map for the PCI |
| |
| commit afbdc649f8751e4f4f1a6f527edfe139773f2c15 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Sep 19 09:34:10 2006 -0500 |
| |
| Modified makefile for new build mechanism. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit d14ba6a798beb753e7a864500414fcc2d198b8bc |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Thu Sep 14 08:40:36 2006 -0500 |
| |
| Handle 86xx SVR values according to the new Reference Manual. |
| Both 8641 and 8641D have SVR == 0x8090, and are distinguished |
| by the byte in bits 16-23 instead. |
| Thanks to Jason Jin for noticing. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 88c8f4921fc47fb0eb2384b16586f1bd7f275be7 |
| Author: Zhang Wei <wei.zhang@freescale.com> |
| Date: Mon Aug 28 14:25:31 2006 +0800 |
| |
| Fixed an OF-tree off-by-one bug when adding a new property name. |
| This bug will cause the kernel booting to pause a long time. |
| |
| Signed-off-by: Zhang Wei <wei.zhang@freescale.com> |
| (cherry picked from 2f15776ccc6dc32377d8ba9652b8f58059c27c6d commit) |
| |
| commit 9bff7a69a885adebbd2bd45990494ec4cf998a30 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Aug 29 11:05:09 2006 -0500 |
| |
| Remove trailing empty lines. |
| |
| commit cd6d73d5b895a5935ac4fde0a356288142a584e0 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Aug 29 09:48:49 2006 -0500 |
| |
| Remove bogus msync and use volatile asm. |
| |
| commit 778d45049ce5927b65b3ff1d8e6692b654bdd49e |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Aug 29 08:17:14 2006 -0500 |
| |
| Add myself as maintainer for MPC8641HPCN. |
| |
| commit 2f15776ccc6dc32377d8ba9652b8f58059c27c6d |
| Author: Zhang Wei <wei.zhang@freescale.com> |
| Date: Mon Aug 28 14:25:31 2006 +0800 |
| |
| Fixed an OF-tree off-by-one bug when adding a new property name. |
| This bug will cause the kernel booting to pause a long time. |
| |
| Signed-off-by: Zhang Wei <wei.zhang@freescale.com> |
| |
| commit 5567806b67d0ae83493aa8823ad3b6c914f581d7 |
| Author: Haiying Wang <haiying.wang@freescale.com> |
| Date: Fri Aug 25 14:38:34 2006 -0400 |
| |
| Change ramdiskaddr and dtbaddr |
| Remove PEX fluff commands. |
| |
| Signed-off-by: Haiying Wang <haiying.wang@freescale.com> |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit b2b78421d9db49c21a821af8a19c21c1f7dfb29e |
| Author: Matthew McClintock <msm@freescale.com> |
| Date: Wed Aug 23 13:32:45 2006 -0500 |
| |
| * Another small fix for booting with disable_of |
| |
| Signed-off-by: Matthew McClintock <msm@freescale.com> |
| |
| commit 4a7cc0f21918e6ecf07ed57075d67df2c4a1299c |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Wed Aug 23 11:04:43 2006 -0500 |
| |
| Cleanup and lindent new AHCI driver. |
| |
| commit dabf9ef8c10b4dead5ef2106ef742b1c06b542de |
| Author: Jin Zhengxiong <jason@bus.ap.freescale.net> |
| Date: Wed Aug 23 19:15:12 2006 +0800 |
| |
| Add AHCI define and sata support for MPC8641HPCN board. |
| |
| Signed-off-by:Jason Jin<jason.jin@freescale.com> |
| |
| commit 4782ac80b02f0d01afd309e2200dd3c7037f2ba4 |
| Author: Jin Zhengxiong <jason@bus.ap.freescale.net> |
| Date: Wed Aug 23 19:10:44 2006 +0800 |
| |
| Add AHCI support to u-boot |
| |
| Add AHCI support in u-boot, enable the sata disk controllers which |
| following the AHCI protocol. |
| |
| Signed-off-by:Jason Jin<jason.jin@freescale.com> |
| |
| commit d8ea2acf5f137cae99417df4f573d036ee384668 |
| Author: Zhang Wei <wei.zhang@freescale.com> |
| Date: Wed Aug 23 17:54:32 2006 +0800 |
| |
| Add dtb boot-up parameter to default boot commands. |
| |
| Signed-off-by: Zhang Wei <wei.zhang@freescale.com> |
| |
| commit b93775c2036b99baa390ea425c4771895bbc63c4 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Aug 22 18:26:08 2006 -0500 |
| |
| Cleanup even more poorly introduced whitespace. |
| |
| commit ae6241685cbcf0c79a3636530d2ceab1fb291a94 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Aug 22 18:07:00 2006 -0500 |
| |
| Cleanup more poorly introduced whitespace. |
| |
| commit 2c33e8a1c535b3ae91cf0b284480600bf3f57c57 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Aug 22 17:54:05 2006 -0500 |
| |
| Cleanup poorly introduced whitespace. |
| |
| commit 80e955c7dd98f4b4fd23c2113caf75ed2b77b5b3 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Aug 22 12:25:27 2006 -0500 |
| |
| General indent and whitespace cleanups. |
| |
| commit ffff3ae56f5842ca3679e4ce7922b819a87aad9f |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Aug 22 12:06:18 2006 -0500 |
| |
| General indent and whitespace cleanups. |
| |
| commit 41a0e8b304d3ff55fe27a230507aac79684016ac |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Aug 22 10:42:21 2006 -0500 |
| |
| Cleanup compiler warnings. |
| |
| commit 5de62c47a8628b3da4d73f7c07027f32a3342d40 |
| Author: Matthew McClintock <msm@freescale.com> |
| Date: Tue Aug 22 09:31:59 2006 -0500 |
| |
| Fix disable_of booting |
| |
| Signed-off-by: Matthew McClintock <msm@freescale.com> |
| |
| commit 87a449c8ac396420cb24260f717ea9e6faa82047 |
| Author: Matthew McClintock <msm@freescale.com> |
| Date: Tue Aug 22 09:23:55 2006 -0500 |
| |
| Support for FDT in uImage format, error when using FDT from flash |
| |
| Signed-off-by: Matthew McClintock <msm@freescale.com> |
| |
| commit 75c299c38369d01addd5e054b8a16217b70f4a86 |
| Author: Haiying Wang <haiying.wang@freescale.com> |
| Date: Tue Aug 15 15:12:55 2006 -0400 |
| |
| Unlock cache before kernel starts up for MPC86xx |
| |
| commit 67256678f00c09b0a7f19e862e5c1847553d31bc |
| Author: Haiying Wang <haiying.wang@freescale.com> |
| Date: Tue Aug 15 15:13:15 2006 -0400 |
| |
| Copy Global Data Pointer to r29 for DECLARE_GLOBAL_DATA_PTR |
| |
| commit 1c8f6d8fb028f156094d05f2d14298e6479364ac |
| Author: Haiying Wang <haiying.wang@freescale.com> |
| Date: Tue Aug 15 15:12:55 2006 -0400 |
| |
| Unlock cache before kernel starts up for MPC86xx |
| |
| commit 0d9ccc55edf9a7f3c5b2b6263580a6ea8d702a04 |
| Author: Haiying Wang <haiying.wang@freescale.com> |
| Date: Tue Aug 15 15:13:15 2006 -0400 |
| |
| Copy Global Data Pointer to r29 for DECLARE_GLOBAL_DATA_PTR |
| |
| commit 86c8e17f25e972a7e272950a0735fad84e082b88 |
| Author: Matthew McClintock <msm@freescale.com> |
| Date: Wed Aug 16 13:59:47 2006 -0500 |
| |
| * Fix disable_of booting |
| |
| Signed-off-by: Matthew McClintock <msm@freescale.com> |
| |
| commit 25c751e9adc86e22fe3b5b47cf2806379b575db7 |
| Author: Matthew McClintock <msm@freescale.com> |
| Date: Wed Aug 16 10:54:09 2006 -0500 |
| |
| * Support for FDT in uImage format, error when using FDT from flash |
| |
| Signed-off-by: Matthew McClintock <msm@freescale.com> |
| |
| commit fecf1c7e4de1b2779edc18742b91c22bdc32b68b |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Mon Aug 14 15:33:38 2006 -0500 |
| |
| Fix BAT0 to actually be cacheable, non-guarded as documented. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 40bc83559db5745681909fd7382ae509567e116d |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Wed Aug 9 15:32:16 2006 -0500 |
| |
| Removed MPC8641HPCN DTS source file from build. |
| It is no longer linked into U-Boot; its sources are |
| now located in the kernel tree. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 34c3c0e01dbf1f8cc2bd08de92f2b89ba84921eb |
| Author: Matthew McClintock <msm@freescale.com> |
| Date: Wed Jun 28 10:47:03 2006 -0500 |
| |
| * Switched default PCI speed for 8540 ADS back to 33MHz |
| |
| * Added comments and a printf to warn that PCI-X won't |
| work at 33MHz |
| Patch by Andy Fleming 17-Mar-2006 |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit b6c5e1373b6ea0bb37a18e4aeecec00613d1cd39 |
| Author: Matthew McClintock <msm@freescale.com> |
| Date: Wed Jun 28 10:46:35 2006 -0500 |
| |
| * Fixed a bug where 8555 PCI code used the old variable and function names Patch by Andy Fleming 17-Mar-2006 |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit bf1dfffd8c26f8ecdd630a0ae4c834e751e4e452 |
| Author: Matthew McClintock <msm@freescale.com> |
| Date: Wed Jun 28 10:46:13 2006 -0500 |
| |
| * Added VIA configuration table |
| |
| * Added support for PCI2 on CDS |
| Patch by Andy Fleming 17-Mar-2006 |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit c88f9fe66b64247e5b6a38410ba315ca25596d16 |
| Author: Matthew McClintock <msm@freescale.com> |
| Date: Wed Jun 28 10:45:41 2006 -0500 |
| |
| * Fixed PCI memory definitions Patch by Andy Fleming 17-Mar-2006 |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 97074ed9655309b64231bc2cee69fe85399f8055 |
| Author: Matthew McClintock <msm@freescale.com> |
| Date: Wed Jun 28 10:45:17 2006 -0500 |
| |
| * Added support for initializing second PCI bus on 85xx Patch by Andy Fleming 17-Mar-2006 |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit f0e6f57f71b3c4fdd13028eb03c3f3e91926dda2 |
| Author: Matthew McClintock <msm@freescale.com> |
| Date: Wed Jun 28 10:44:49 2006 -0500 |
| |
| * Added PCI-X #defines for PCI-X initialization Patch by Andy Fleming on 17-Mar-2006 |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit a4e11558b810ef2cddffdf7b9d86bc1130441960 |
| Author: Matthew McClintock <msm@freescale.com> |
| Date: Wed Jun 28 10:44:23 2006 -0500 |
| |
| * Made sure the code which disables prefetch for PCI devices sets the size of the prefetch region to 0 Patch by Andy Fleming on 17-Mar-2006 |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 0e16387db1d4aacd5bf35cb6d7c1942765c0347b |
| Author: Matthew McClintock <msm@freescale.com> |
| Date: Wed Jun 28 10:43:36 2006 -0500 |
| |
| * Add Flat Dev Tree construction for MPC85xx ADS and CDS boards Patch by Jon Loeliger 17-Jan-2006 |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 855e6fb073f9d04fe4a7f06c107ecbac6344ddd4 |
| Author: Matthew McClintock <msm@freescale.com> |
| Date: Wed Jun 28 10:43:00 2006 -0500 |
| |
| * Removed the oftree.dts for stxxtx in light of the changes to the flat device tree handling code Patch by Matthew McClintock 26-June-2006 |
| |
| commit 5498d90312aad9f6bdbf047986027c35b03cd163 |
| Author: Matthew McClintock <msm@freescale.com> |
| Date: Wed Jun 28 10:42:24 2006 -0500 |
| |
| * Patch to modify ft_build.c to update flat device trees in place Patch by Matthew McClintock 26-June-2006 |
| |
| commit 0267768eddc5ca7bc1865bc40c866829ac5efbfe |
| Author: Matthew McClintock <msm@freescale.com> |
| Date: Wed Jun 28 10:41:37 2006 -0500 |
| |
| * Modify bootm command to support booting with flat device trees Patch by Matthew McClintock 26-June-2006 |
| |
| commit 8fc8bd2cc479b6cd188fdede4010e0e052970b8a |
| Author: John Traill <john.traill@freescale.com> |
| Date: Wed Aug 9 14:33:50 2006 +0100 |
| |
| Add Rapidio support for the MPC8641HPCN |
| |
| Signed-off-by: John Traill <john.traill@freescale.com> |
| |
| commit 91a414c7d1fb0eac912592cd995b30c9f23045c9 |
| Author: John Traill <john.traill@freescale.com> |
| Date: Tue Aug 8 11:32:43 2006 +0100 |
| |
| Fix caslat calculation |
| |
| Signed-off-by: John Traill <john.traill@freescale.com> |
| |
| commit 709d3073e74153278e7904a70819bbef7df50e1a |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Thu Aug 3 16:17:56 2006 -0500 |
| |
| Convert to mac-address in ethernet nodes. |
| |
| commit 71748af833ca1017edf1415be376366ff2937d17 |
| Author: Haiying Wang <haiying.wang@freescale.com> |
| Date: Fri Jul 28 12:41:35 2006 -0400 |
| |
| Correct the irq value of DUART2 |
| |
| commit 9cb3e8816ae4d854e7dc22128c3eea3d70bb982c |
| Author: Haiying Wang <haiying.wang@freescale.com> |
| Date: Fri Jul 28 12:41:41 2006 -0400 |
| |
| Change the space size of PEX IO in README |
| |
| commit 239db37c94f7a92941c4465feceb867c609241c5 |
| Author: Haiying Wang <haiying.wang@freescale.com> |
| Date: Fri Jul 28 12:41:18 2006 -0400 |
| |
| Move get_board_sys_clk to board directory |
| |
| commit 492900b985439fbce1a118afde1e35def870db03 |
| Author: John Traill <john.traill@freescale.com> |
| Date: Fri Jul 28 09:03:54 2006 +0100 |
| |
| Fix 8641HPCN pollution |
| |
| commit 515ab8a62e8574e2babc6e8dcc43544ad221c5b2 |
| Author: John Traill <john.traill@freescale.com> |
| Date: Fri Jul 28 08:16:06 2006 +0100 |
| |
| Fix 8641HPCN timebase |
| |
| commit c86360b830f1eecd7a72208575dde4f57879faea |
| Author: Zhang Wei <wei.zhang@freescale.com> |
| Date: Fri Jul 28 00:01:34 2006 +0800 |
| |
| Fixed OF device tree of mpc86xxhpcn board. |
| |
| The changes works in with kernel irq mapping rework. |
| |
| Signed-off-by: Zhang Wei <wei.zhang@freescale.com> |
| |
| commit bea3f28d285942bf3f7ab339ce85178ded544225 |
| Author: Haiying Wang <haiying.wang@freescale.com> |
| Date: Wed Jul 12 10:48:05 2006 -0400 |
| |
| Add support for reading and writing mac addresses to or from ID EEPROM. |
| |
| Added code for reading and writing Mac addresses to/from ID EEPROM(0x57). |
| With attached patch, we can use command "mac/mac read/mac save/" |
| to read and write EEPROM under u-boot prompt. |
| |
| U-boot will calculate the checksum of EEPROM while bootup, |
| if it is right, then u-boot will check whether the mac address |
| of eTSEC0/1/2/3 is availalbe (non-zero). |
| |
| If there is mac address availabe in EEPROM, u-boot will use it, |
| otherewise, u-boot will use the mac address defined in |
| MPC8641HPCN.h. This matches the requirement to set unique mac address |
| for each TSEC port. |
| |
| Signed-off-by: Haiying Wang <haiying.wang@freescale.com> |
| Signed-off-by: York Sun <yorksun@freescale.com> |
| |
| commit fcb28e763415e0e4e66b0f45842d1557ae198e5e |
| Author: Jin Zhengxiong <Jason.Jin@freescale.com> |
| Date: Thu Jul 13 10:35:10 2006 -0500 |
| |
| Fixed initrd issue by define big RAM |
| |
| Signed-off-by:Jason Jin <Jason.jin@freescale.com> |
| |
| commit e6cd2a1785d74ec3d30a86f1cb360be8de478151 |
| Author: Jason Jin <Jason.jin@freescale.com> |
| Date: Fri Jul 7 10:01:45 2006 -0500 |
| |
| We made a u-boot patch to fix the hang up issue |
| when booting filesystem from ramdisk. |
| |
| Signed-off-by:Jason Jin <Jason.jin@freescale.com> |
| |
| commit 38433ccc5850ee70549af0b2bc5b920355ef5388 |
| Author: Matthew McClintock <msm@freescale.com> |
| Date: Wed Jun 28 10:47:03 2006 -0500 |
| |
| * Switched default PCI speed for 8540 ADS back to 33MHz |
| * Added comments and a printf to warn that PCI-X won't |
| work at 33MHz |
| Patch by Andy Fleming 17-Mar-2006 |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit e4c2a0eb0c3e3ffbf824800184ee42bdc99d5b19 |
| Author: Matthew McClintock <msm@freescale.com> |
| Date: Wed Jun 28 10:46:35 2006 -0500 |
| |
| * Fixed a bug where 8555 PCI code used the old variable and |
| function names |
| Patch by Andy Fleming 17-Mar-2006 |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit cbfc7ce756b88eb26e5537bc7b625c445c6dcfac |
| Author: Matthew McClintock <msm@freescale.com> |
| Date: Wed Jun 28 10:46:13 2006 -0500 |
| |
| * Added VIA configuration table |
| * Added support for PCI2 on CDS |
| Patch by Andy Fleming 17-Mar-2006 |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 52c7a68b8d587ebcf5a6b051b58b3d3ffa377ddc |
| Author: Matthew McClintock <msm@freescale.com> |
| Date: Wed Jun 28 10:45:41 2006 -0500 |
| |
| * Fixed PCI memory definitions |
| Patch by Andy Fleming 17-Mar-2006 |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 087454609e47295443af793a282cddcd91a5f49c |
| Author: Matthew McClintock <msm@freescale.com> |
| Date: Wed Jun 28 10:45:17 2006 -0500 |
| |
| * Added support for initializing second PCI bus on 85xx |
| Patch by Andy Fleming 17-Mar-2006 |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit b636aaeb6fd516a442fb611bbeeddf3077a687fb |
| Author: Matthew McClintock <msm@freescale.com> |
| Date: Wed Jun 28 10:44:49 2006 -0500 |
| |
| * Added PCI-X #defines for PCI-X initialization |
| Patch by Andy Fleming on 17-Mar-2006 |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 20abbc6fffa115690107cc942c7abf84bdc03a1b |
| Author: Matthew McClintock <msm@freescale.com> |
| Date: Wed Jun 28 10:44:23 2006 -0500 |
| |
| * Made sure the code which disables prefetch for PCI devices |
| sets the size of the prefetch region to 0 |
| Patch by Andy Fleming on 17-Mar-2006 |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 40d5fa35d02df22580593bf0039ab173367e8ef0 |
| Author: Matthew McClintock <msm@freescale.com> |
| Date: Wed Jun 28 10:43:36 2006 -0500 |
| |
| * Add Flat Dev Tree construction for MPC85xx ADS and CDS boards |
| Patch by Jon Loeliger 17-Jan-2006 |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit be7e8b0cb5a0c49dc180075b96df296a893bf146 |
| Author: Matthew McClintock <msm@freescale.com> |
| Date: Wed Jun 28 10:43:00 2006 -0500 |
| |
| * Removed the oftree.dts for stxxtx in light of the changes |
| to the flat device tree handling code |
| Patch by Matthew McClintock 26-June-2006 |
| |
| commit 1b380ec225665e73959677f3893dc658c5925e05 |
| Author: Matthew McClintock <msm@freescale.com> |
| Date: Wed Jun 28 10:42:24 2006 -0500 |
| |
| * Patch to modify ft_build.c to update flat device trees in place |
| Patch by Matthew McClintock 26-June-2006 |
| |
| commit 98a9c4d468a942a09ebe8979bec508017f3e4462 |
| Author: Matthew McClintock <msm@freescale.com> |
| Date: Wed Jun 28 10:41:37 2006 -0500 |
| |
| * Modify bootm command to support booting with flat device trees |
| Patch by Matthew McClintock 26-June-2006 |
| |
| commit da012ab661fd4ab169dd7b9b32201a4df62cf34a |
| Author: Jin Zhengxiong <Jason.Jin@freescale.com> |
| Date: Wed Jun 28 08:43:56 2006 -0500 |
| |
| Change Id to symbolic name for RTL8139 |
| |
| Signed-off-by: Jason Jin <Jason.jin@freescale.com> |
| |
| commit bc09cf3c2bfb8d54c659cbb332f79d0950982fd0 |
| Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com> |
| Date: Tue Jun 27 18:12:10 2006 +0800 |
| |
| Fix RTL8139 in big endian |
| |
| signed-off-by: Jason Jin <Jason.Jin@freescale.com> |
| signed-off-by: Wei Zhang <wei.zhang@freescale.com> |
| |
| commit fcfb9a57947fc203b99fe81ab0578f7286261f9f |
| Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com> |
| Date: Tue Jun 27 18:12:23 2006 +0800 |
| |
| Fix Tsec bug when no link |
| |
| When tftp a non-exist file from the tftp server, u-boot will check |
| the link of all eth port. The original file will return wrong link |
| state on the no link ports. |
| |
| signed-off-by: Jason Jin <Jason.Jin@freescale.com> |
| |
| commit bd22c2b97514fbfb0e03bd9c72b3445e4dbd57e2 |
| Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com> |
| Date: Tue Jun 27 18:12:02 2006 +0800 |
| |
| Fix bug for io_bar size during pci scan |
| |
| During the pci scan process, Some devices return bar_reponse with the |
| highest bytes 0, such as the pci bridge in uli1575 return bar_response |
| with 0xffffff, So the bar_size should be manually set under 64K. |
| |
| Signed-off-by: Jason Jin <jason.jin@freescale.com> |
| |
| commit fa7db9c377bc2353a17bf1d381d65a6c418728f0 |
| Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com> |
| Date: Tue Jun 27 18:11:54 2006 +0800 |
| |
| Enable PCIE1 for MPC8641HPCN board |
| |
| Signed-off-by: Jason Jin <Jason.jin@freescale.com> |
| |
| commit 684623ce92c5fd32e7db2d6e016945a67c5ffaba |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Thu Jun 22 08:51:46 2006 -0500 |
| |
| Fix bug in 8641hpcn reset command with no args. |
| |
| Signed-off-by: Haiying Wang <haiying.wang@freescale.com> |
| Acked-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 8be429a5ddbf0ebe2d94174ba58fcfc7a24285dc |
| Author: Zhang Wei <wei.zhang@freescale.com> |
| Date: Tue Jun 20 17:47:15 2006 +0800 |
| |
| Reworked IRQ mapping in OF-tree. |
| |
| commit 0e4c2a17ca34001ed36d259f13cb88ada4611a8c |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Thu Jun 15 21:33:37 2006 -0500 |
| |
| Do not enable address translation on secondary CPUs. |
| Do not set up BATs on secondary CPUs. Let Linux do the nasty. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 8ecc971618f56029ad99d3516f8b297a6ed58971 |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Wed Jun 7 10:53:55 2006 -0500 |
| |
| Fix a get_board_sys_clk() use-before-def warning. |
| |
| Signed-off-by: Jon Loeliger <jdl@jdl.com> |
| |
| commit d9bf4858fca5aa4d651b283270f77da72ebadfd5 |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Wed Jun 7 10:52:49 2006 -0500 |
| |
| Allow DTC path to be passed in. |
| |
| Signed-off-by: Jon Loeliger <jdl@jdl.com> |
| |
| commit c83ae9ea6d93abbe751bf8a3396236a084e56f87 |
| Author: Haiying Wang <haiying.wang@freescale.com> |
| Date: Tue Jun 6 16:54:29 2006 -0400 |
| |
| Modify the IRQ of DUART2 |
| |
| commit c934f655f9aeca70a5c5f88b465d9e9d57a8d22e |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Wed May 31 13:55:35 2006 -0500 |
| |
| Review cleanups. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit cb5965fb95b77a49f4e6af95248e0c849f4af03e |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Wed May 31 12:44:44 2006 -0500 |
| |
| White space cleanup. |
| Some 80-column cleanups. |
| Convert printf() to puts() where possible. |
| Use #include "spd_sdram.h" as needed. |
| Enhanced reset command usage message a bit. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 3d5c5be547445dd3bd2eb7368d80df03ea437970 |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Wed May 31 11:39:34 2006 -0500 |
| |
| Removed unneeded local_bus_init() from 8641HPCN board. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 4d3d729c16c392d2982d3266b659d333c927697d |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Wed May 31 11:24:28 2006 -0500 |
| |
| Moved mpc8641hpcn_board_reset() out of cpu/ into board/. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit b2a941de060350ad15878d8219825f4950e9bb8e |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Wed May 31 10:07:28 2006 -0500 |
| |
| Remove dead debug code. |
| |
| Signed-off-by: Jon Loeliger <jdl@jdl.com> |
| |
| commit 126aa70f10ba3d20e0a6f4d32328250513b77770 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue May 30 17:47:00 2006 -0500 |
| |
| Move mpc86xx PIXIS code to board directory |
| |
| First cut at moving the PIXIS platform code out of |
| the 86xx cpu directory and into board/mpc8641hpcn |
| where it belongs. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 38cee12dcfcc257371c901c7e13e58ecab0a35d8 |
| Author: Haiying Wang <Haiying.Wang@freescale.com> |
| Date: Tue May 30 09:10:32 2006 -0500 |
| |
| Improve "reset" command's interaction with watchdog. |
| |
| "reset altbank" will reset another bank WITHOUT watch dog timer enabled |
| "reset altbank wd" will reset another bank WITH watch dog enabled |
| "diswd" will disable watch dog after u-boot boots up successfully |
| |
| Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> |
| |
| commit 70205e5a6ddc8528b11db9eb4d3fa0209d9fce2a |
| Author: Haiying Wang <Haiying.Wang@freescale.com> |
| Date: Tue May 30 08:51:19 2006 -0500 |
| |
| Fix two SDRAM setup bugs. |
| |
| Fix ECC setup bug. |
| Enable 1T/2T based on number of DIMMs present. |
| |
| Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> |
| |
| commit d11fec5015334deb2010e36ce00bb118cc5429a5 |
| Author: Haiying Wang <Haiying.Wang@freescale.com> |
| Date: Fri May 26 10:24:48 2006 -0500 |
| |
| Add first draft of the MPC8641HPCN doc/README. |
| |
| Signed-off-by: Jon Loeliger <jdl@jdl.com> |
| |
| commit ed45d6c930b5939718a87ee12e25cf9a05978d4a |
| Author: Haiying Wang <Haiying.Wang@freescale.com> |
| Date: Fri May 26 10:13:04 2006 -0500 |
| |
| Added pci@8000 block. |
| Updated ethernet interrupt mappings (moved up 48). |
| Cleaned up a few comments. |
| |
| Signed-off-by: Jon Loeliger <jdl@jdl.com> |
| |
| commit 3033ebb20fd7c372c7bca3c9955a4692bb2240b7 |
| Author: Haiying Wang <Haiying.Wang@freescale.com> |
| Date: Fri May 26 10:01:16 2006 -0500 |
| |
| Allow args on reset command. |
| |
| Signed-off-by: Jon Loeliger <jdl@jdl.com> |
| |
| commit 14e37081ff3cac7ebe6e93836523429853b6b292 |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Fri May 19 13:28:39 2006 -0500 |
| |
| Change arbitration to round-robin for SMP linux. |
| |
| commit 9a655876e5995be80f49054e2509500e871e4d3a |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Fri May 19 13:26:34 2006 -0500 |
| |
| Enable dual DDR controllers and interleaving. |
| |
| commit 586d1d5abd3e525f1e1d9b81e5a61a4da6b2fa3c |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Fri May 19 13:22:44 2006 -0500 |
| |
| Update 86xx address map and LAWBARs. |
| |
| commit cccce5d0581bb0ba4602799a4b5112e58d1579cb |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Fri May 19 13:14:15 2006 -0500 |
| |
| Remove L2 Cache invalidate polling. |
| |
| commit f35ec68fb066cec0e36294bfe07dec2d4e8ad3a8 |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Fri May 19 12:33:09 2006 -0500 |
| |
| Enable 2nd CPU and I2C. |
| |
| commit bf690dcb512d34c4fceec0eb1e5c0e88a9db5d54 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Mon May 15 07:26:56 2006 -0500 |
| |
| Update interrupt mapping. |
| |
| commit 6cfea33477b04b63ed47386ed1629529484c33ba |
| Author: Haiying Wang <Haiying.Wang@freescale.com> |
| Date: Wed May 10 09:38:06 2006 -0500 |
| |
| Remove unneeded INIT_RAM_LOCK cache twiddling. |
| Correctly tracks r29 as global data pointer now. |
| |
| Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> |
| |
| commit d4dd317b58c126a2a7e73f4764ecc1a7c97f876c |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Wed May 10 09:33:07 2006 -0500 |
| |
| Remove unnecessary flash.c file. |
| |
| commit 18b6c8cd8af6cc7f35180cedc4adb3236cc1a1b8 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue May 9 08:23:49 2006 -0500 |
| |
| Get MPC8641HPCN flash images working. |
| |
| Enable the CFI driver. |
| Remove bogus LAWBAR7 cruft. |
| Use correct TEXT_BASE, Fixup load script. |
| Enable SPD EEPROM during DDR setup. |
| Use generic RFC 1918 IP addresses by default. |
| |
| commit 5c9efb36a6b5431423f52888a0e3b4b515fe7eca |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Thu Apr 27 10:15:16 2006 -0500 |
| |
| Cleanup whitespaces and style issues. |
| Removed //-style comments. |
| Use 80-column lines. |
| Remove trailing whitespace. |
| Remove dead code and debug cruft. |
| |
| commit a2320a6bf8113a09544c42d160d10ac69d049a03 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Thu Apr 27 08:22:39 2006 -0500 |
| |
| Revert bad PCI prefetch limit change. |
| |
| commit debb7354d1ea4f694154818df5e5b523f5c1cc1d |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Wed Apr 26 17:58:56 2006 -0500 |
| |
| Initial support for MPC8641 HPCN board. |