| /* |
| * (C) Copyright 2003-2004 |
| * Wolfgang Denk, DENX Software Engineering, wd@denx.de. |
| * |
| * (C) Copyright 2004 |
| * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com. |
| * |
| * (C) Copyright 2004 |
| * Martin Krause, TQ-Systems GmbH, martin.krause@tqs.de |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| #include <common.h> |
| #include <mpc5xxx.h> |
| #include <pci.h> |
| #include <malloc.h> |
| |
| #ifndef CFG_RAMBOOT |
| static void sdram_start (int hi_addr) |
| { |
| long hi_addr_bit = hi_addr ? 0x01000000 : 0; |
| |
| /* unlock mode register */ |
| *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000000 | hi_addr_bit; |
| __asm__ volatile ("sync"); |
| |
| /* precharge all banks */ |
| *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000002 | hi_addr_bit; |
| __asm__ volatile ("sync"); |
| |
| #if SDRAM_DDR |
| /* set mode register: extended mode */ |
| *(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_EMODE; |
| __asm__ volatile ("sync"); |
| |
| /* set mode register: reset DLL */ |
| *(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_MODE | 0x04000000; |
| __asm__ volatile ("sync"); |
| #endif |
| |
| /* precharge all banks */ |
| *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000002 | hi_addr_bit; |
| __asm__ volatile ("sync"); |
| |
| /* auto refresh */ |
| *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000004 | hi_addr_bit; |
| __asm__ volatile ("sync"); |
| |
| /* set mode register */ |
| *(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_MODE; |
| __asm__ volatile ("sync"); |
| |
| /* normal operation */ |
| *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | hi_addr_bit; |
| __asm__ volatile ("sync"); |
| } |
| #endif |
| |
| /* |
| * ATTENTION: Although partially referenced initdram does NOT make real use |
| * use of CFG_SDRAM_BASE. The code does not work if CFG_SDRAM_BASE |
| * is something else than 0x00000000. |
| */ |
| |
| long int initdram (int board_type) |
| { |
| ulong dramsize = 0; |
| #ifndef CFG_RAMBOOT |
| ulong test1, test2; |
| |
| /* setup SDRAM chip selects */ |
| *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x0000001c; /* 512MB at 0x0 */ |
| *(vu_long *)MPC5XXX_SDRAM_CS1CFG = 0x40000000; /* disabled */ |
| __asm__ volatile ("sync"); |
| |
| /* setup config registers */ |
| *(vu_long *)MPC5XXX_SDRAM_CONFIG1 = SDRAM_CONFIG1; |
| *(vu_long *)MPC5XXX_SDRAM_CONFIG2 = SDRAM_CONFIG2; |
| __asm__ volatile ("sync"); |
| |
| #if SDRAM_DDR |
| /* set tap delay */ |
| *(vu_long *)MPC5XXX_CDM_PORCFG = SDRAM_TAPDELAY; |
| __asm__ volatile ("sync"); |
| #endif |
| |
| /* find RAM size using SDRAM CS0 only */ |
| sdram_start(0); |
| test1 = get_ram_size((long *)CFG_SDRAM_BASE, 0x20000000); |
| sdram_start(1); |
| test2 = get_ram_size((long *)CFG_SDRAM_BASE, 0x20000000); |
| if (test1 > test2) { |
| sdram_start(0); |
| dramsize = test1; |
| } else { |
| dramsize = test2; |
| } |
| |
| /* memory smaller than 1MB is impossible */ |
| if (dramsize < (1 << 20)) { |
| dramsize = 0; |
| } |
| |
| /* set SDRAM CS0 size according to the amount of RAM found */ |
| if (dramsize > 0) { |
| *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x13 + |
| __builtin_ffs(dramsize >> 20) - 1; |
| } else { |
| *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0; /* disabled */ |
| } |
| |
| *(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize; /* disabled */ |
| #else /* CFG_RAMBOOT */ |
| |
| /* retrieve size of memory connected to SDRAM CS0 */ |
| dramsize = *(vu_long *)MPC5XXX_SDRAM_CS0CFG & 0xFF; |
| if (dramsize >= 0x13) { |
| dramsize = (1 << (dramsize - 0x13)) << 20; |
| } else { |
| dramsize = 0; |
| } |
| |
| /* retrieve size of memory connected to SDRAM CS1 */ |
| dramsize2 = *(vu_long *)MPC5XXX_SDRAM_CS1CFG & 0xFF; |
| if (dramsize2 >= 0x13) { |
| dramsize2 = (1 << (dramsize2 - 0x13)) << 20; |
| } else { |
| dramsize2 = 0; |
| } |
| |
| #endif /* CFG_RAMBOOT */ |
| |
| /* |
| * On MPC5200B we need to set the special configuration delay in the |
| * DDR controller. Please refer to Freescale's AN3221 "MPC5200B SDRAM |
| * Initialization and Configuration", 3.3.1 SDelay--MBAR + 0x0190: |
| * |
| * "The SDelay should be written to a value of 0x00000004. It is |
| * required to account for changes caused by normal wafer processing |
| * parameters." |
| */ |
| svr = get_svr(); |
| pvr = get_pvr(); |
| if ((SVR_MJREV(svr) >= 2) && |
| (PVR_MAJ(pvr) == 1) && (PVR_MIN(pvr) == 4)) { |
| |
| *(vu_long *)MPC5XXX_SDRAM_SDELAY = 0x04; |
| __asm__ volatile ("sync"); |
| } |
| |
| /* return dramsize + dramsize2; */ |
| return dramsize; |
| } |
| |
| int checkboard (void) |
| { |
| puts ("Board: HMI1001\n"); |
| return 0; |
| } |
| |
| #ifdef CONFIG_PREBOOT |
| |
| static uchar kbd_magic_prefix[] = "key_magic"; |
| static uchar kbd_command_prefix[] = "key_cmd"; |
| |
| #define S1_ROT 0xf0 |
| #define S2_Q 0x40 |
| #define S2_M 0x20 |
| |
| struct kbd_data_t { |
| char s1; |
| char s2; |
| }; |
| |
| struct kbd_data_t* get_keys (struct kbd_data_t *kbd_data) |
| { |
| kbd_data->s1 = *((volatile uchar*)(CFG_STATUS1_BASE)); |
| kbd_data->s2 = *((volatile uchar*)(CFG_STATUS2_BASE)); |
| |
| return kbd_data; |
| } |
| |
| static int compare_magic (const struct kbd_data_t *kbd_data, char *str) |
| { |
| char s1 = str[0]; |
| char s2; |
| |
| if (s1 >= '0' && s1 <= '9') |
| s1 -= '0'; |
| else if (s1 >= 'a' && s1 <= 'f') |
| s1 = s1 - 'a' + 10; |
| else if (s1 >= 'A' && s1 <= 'F') |
| s1 = s1 - 'A' + 10; |
| else |
| return -1; |
| |
| if (((S1_ROT & kbd_data->s1) >> 4) != s1) |
| return -1; |
| |
| s2 = (S2_Q | S2_M) & kbd_data->s2; |
| |
| switch (str[1]) { |
| case 'q': |
| case 'Q': |
| if (s2 == S2_Q) |
| return -1; |
| break; |
| case 'm': |
| case 'M': |
| if (s2 == S2_M) |
| return -1; |
| break; |
| case '\0': |
| if (s2 == (S2_Q | S2_M)) |
| return 0; |
| default: |
| return -1; |
| } |
| |
| if (str[2]) |
| return -1; |
| |
| return 0; |
| } |
| |
| static char *key_match (const struct kbd_data_t *kbd_data) |
| { |
| char magic[sizeof (kbd_magic_prefix) + 1]; |
| char *suffix; |
| char *kbd_magic_keys; |
| |
| /* |
| * The following string defines the characters that can be appended |
| * to "key_magic" to form the names of environment variables that |
| * hold "magic" key codes, i. e. such key codes that can cause |
| * pre-boot actions. If the string is empty (""), then only |
| * "key_magic" is checked (old behaviour); the string "125" causes |
| * checks for "key_magic1", "key_magic2" and "key_magic5", etc. |
| */ |
| if ((kbd_magic_keys = getenv ("magic_keys")) == NULL) |
| kbd_magic_keys = ""; |
| |
| /* loop over all magic keys; |
| * use '\0' suffix in case of empty string |
| */ |
| for (suffix = kbd_magic_keys; *suffix || |
| suffix == kbd_magic_keys; ++suffix) { |
| sprintf (magic, "%s%c", kbd_magic_prefix, *suffix); |
| |
| if (compare_magic(kbd_data, getenv(magic)) == 0) { |
| char cmd_name[sizeof (kbd_command_prefix) + 1]; |
| char *cmd; |
| |
| sprintf (cmd_name, "%s%c", kbd_command_prefix, *suffix); |
| cmd = getenv (cmd_name); |
| |
| return (cmd); |
| } |
| } |
| |
| return (NULL); |
| } |
| |
| #endif /* CONFIG_PREBOOT */ |
| |
| int misc_init_r (void) |
| { |
| #ifdef CONFIG_PREBOOT |
| struct kbd_data_t kbd_data; |
| /* Decode keys */ |
| char *str = strdup (key_match (get_keys (&kbd_data))); |
| /* Set or delete definition */ |
| setenv ("preboot", str); |
| free (str); |
| #endif /* CONFIG_PREBOOT */ |
| |
| return 0; |
| } |
| |
| int board_early_init_r (void) |
| { |
| *(vu_long *)MPC5XXX_BOOTCS_CFG &= ~0x1; /* clear RO */ |
| *(vu_long *)MPC5XXX_BOOTCS_START = |
| *(vu_long *)MPC5XXX_CS0_START = START_REG(CFG_FLASH_BASE); |
| *(vu_long *)MPC5XXX_BOOTCS_STOP = |
| *(vu_long *)MPC5XXX_CS0_STOP = STOP_REG(CFG_FLASH_BASE, CFG_FLASH_SIZE); |
| return 0; |
| } |
| #ifdef CONFIG_PCI |
| static struct pci_controller hose; |
| |
| extern void pci_mpc5xxx_init(struct pci_controller *); |
| |
| void pci_init_board(void) |
| { |
| pci_mpc5xxx_init(&hose); |
| } |
| #endif |