| #include <common.h> |
| #include <watchdog.h> |
| #include <asm/errno.h> |
| #include <linux/usb/ch9.h> |
| #include <linux/usb/gadget.h> |
| |
| #define __UBOOT__ |
| #include <usb.h> |
| #include "linux-compat.h" |
| #include "usb-compat.h" |
| #include "musb_core.h" |
| #include "musb_host.h" |
| #include "musb_gadget.h" |
| |
| #ifdef CONFIG_MUSB_HOST |
| static struct musb *host; |
| static struct usb_hcd hcd; |
| static enum usb_device_speed host_speed; |
| |
| static void musb_host_complete_urb(struct urb *urb) |
| { |
| urb->dev->status &= ~USB_ST_NOT_PROC; |
| urb->dev->act_len = urb->actual_length; |
| } |
| |
| static struct usb_host_endpoint hep; |
| static struct urb urb; |
| |
| static struct urb *construct_urb(struct usb_device *dev, int endpoint_type, |
| unsigned long pipe, void *buffer, int len, |
| struct devrequest *setup, int interval) |
| { |
| int epnum = usb_pipeendpoint(pipe); |
| int is_in = usb_pipein(pipe); |
| |
| memset(&urb, 0, sizeof(struct urb)); |
| memset(&hep, 0, sizeof(struct usb_host_endpoint)); |
| INIT_LIST_HEAD(&hep.urb_list); |
| INIT_LIST_HEAD(&urb.urb_list); |
| urb.ep = &hep; |
| urb.complete = musb_host_complete_urb; |
| urb.status = -EINPROGRESS; |
| urb.dev = dev; |
| urb.pipe = pipe; |
| urb.transfer_buffer = buffer; |
| urb.transfer_dma = (unsigned long)buffer; |
| urb.transfer_buffer_length = len; |
| urb.setup_packet = (unsigned char *)setup; |
| |
| urb.ep->desc.wMaxPacketSize = |
| __cpu_to_le16(is_in ? dev->epmaxpacketin[epnum] : |
| dev->epmaxpacketout[epnum]); |
| urb.ep->desc.bmAttributes = endpoint_type; |
| urb.ep->desc.bEndpointAddress = |
| (is_in ? USB_DIR_IN : USB_DIR_OUT) | epnum; |
| urb.ep->desc.bInterval = interval; |
| |
| return &urb; |
| } |
| |
| #define MUSB_HOST_TIMEOUT 0x3ffffff |
| |
| static int submit_urb(struct usb_hcd *hcd, struct urb *urb) |
| { |
| struct musb *host = hcd->hcd_priv; |
| int ret; |
| int timeout; |
| |
| ret = musb_urb_enqueue(hcd, urb, 0); |
| if (ret < 0) { |
| printf("Failed to enqueue URB to controller\n"); |
| return ret; |
| } |
| |
| timeout = MUSB_HOST_TIMEOUT; |
| do { |
| if (ctrlc()) |
| return -EIO; |
| host->isr(0, host); |
| } while ((urb->dev->status & USB_ST_NOT_PROC) && --timeout); |
| |
| return urb->status; |
| } |
| |
| int submit_control_msg(struct usb_device *dev, unsigned long pipe, |
| void *buffer, int len, struct devrequest *setup) |
| { |
| struct urb *urb = construct_urb(dev, USB_ENDPOINT_XFER_CONTROL, pipe, |
| buffer, len, setup, 0); |
| |
| /* Fix speed for non hub-attached devices */ |
| if (!dev->parent) |
| dev->speed = host_speed; |
| |
| return submit_urb(&hcd, urb); |
| } |
| |
| |
| int submit_bulk_msg(struct usb_device *dev, unsigned long pipe, |
| void *buffer, int len) |
| { |
| struct urb *urb = construct_urb(dev, USB_ENDPOINT_XFER_BULK, pipe, |
| buffer, len, NULL, 0); |
| return submit_urb(&hcd, urb); |
| } |
| |
| int submit_int_msg(struct usb_device *dev, unsigned long pipe, |
| void *buffer, int len, int interval) |
| { |
| struct urb *urb = construct_urb(dev, USB_ENDPOINT_XFER_INT, pipe, |
| buffer, len, NULL, interval); |
| return submit_urb(&hcd, urb); |
| } |
| |
| int usb_lowlevel_init(int index, void **controller) |
| { |
| u8 power; |
| void *mbase; |
| int timeout = MUSB_HOST_TIMEOUT; |
| |
| if (!host) { |
| printf("MUSB host is not registered\n"); |
| return -ENODEV; |
| } |
| |
| musb_start(host); |
| mbase = host->mregs; |
| do { |
| if (musb_readb(mbase, MUSB_DEVCTL) & MUSB_DEVCTL_HM) |
| break; |
| } while (--timeout); |
| if (!timeout) |
| return -ENODEV; |
| |
| power = musb_readb(mbase, MUSB_POWER); |
| musb_writeb(mbase, MUSB_POWER, MUSB_POWER_RESET | power); |
| udelay(30000); |
| power = musb_readb(mbase, MUSB_POWER); |
| musb_writeb(mbase, MUSB_POWER, ~MUSB_POWER_RESET & power); |
| host->isr(0, host); |
| host_speed = (musb_readb(mbase, MUSB_POWER) & MUSB_POWER_HSMODE) ? |
| USB_SPEED_HIGH : |
| (musb_readb(mbase, MUSB_DEVCTL) & MUSB_DEVCTL_FSDEV) ? |
| USB_SPEED_FULL : USB_SPEED_LOW; |
| host->is_active = 1; |
| hcd.hcd_priv = host; |
| |
| return 0; |
| } |
| |
| int usb_lowlevel_stop(int index) |
| { |
| if (!host) { |
| printf("MUSB host is not registered\n"); |
| return -ENODEV; |
| } |
| |
| musb_stop(host); |
| return 0; |
| } |
| #endif /* CONFIG_MUSB_HOST */ |
| |
| #ifdef CONFIG_MUSB_GADGET |
| static struct musb *gadget; |
| |
| int usb_gadget_handle_interrupts(void) |
| { |
| WATCHDOG_RESET(); |
| if (!gadget || !gadget->isr) |
| return -EINVAL; |
| |
| return gadget->isr(0, gadget); |
| } |
| |
| int usb_gadget_register_driver(struct usb_gadget_driver *driver) |
| { |
| int ret; |
| |
| if (!driver || driver->speed < USB_SPEED_FULL || !driver->bind || |
| !driver->setup) { |
| printf("bad parameter.\n"); |
| return -EINVAL; |
| } |
| |
| if (!gadget) { |
| printf("Controller uninitialized\n"); |
| return -ENXIO; |
| } |
| |
| ret = musb_gadget_start(&gadget->g, driver); |
| if (ret < 0) { |
| printf("gadget_start failed with %d\n", ret); |
| return ret; |
| } |
| |
| ret = driver->bind(&gadget->g); |
| if (ret < 0) { |
| printf("bind failed with %d\n", ret); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| int usb_gadget_unregister_driver(struct usb_gadget_driver *driver) |
| { |
| /* TODO: implement me */ |
| return 0; |
| } |
| #endif /* CONFIG_MUSB_GADGET */ |
| |
| int musb_register(struct musb_hdrc_platform_data *plat, void *bdata, |
| void *ctl_regs) |
| { |
| struct musb **musbp; |
| |
| switch (plat->mode) { |
| #ifdef CONFIG_MUSB_HOST |
| case MUSB_HOST: |
| musbp = &host; |
| break; |
| #endif |
| #ifdef CONFIG_MUSB_GADGET |
| case MUSB_PERIPHERAL: |
| musbp = &gadget; |
| break; |
| #endif |
| default: |
| return -EINVAL; |
| } |
| |
| *musbp = musb_init_controller(plat, (struct device *)bdata, ctl_regs); |
| if (!musbp) { |
| printf("Failed to init the controller\n"); |
| return -EIO; |
| } |
| |
| return 0; |
| } |