blob: 76631fa452fb6090dcf942b939bcf7ddbce749d3 [file] [log] [blame]
/*
* Copyright 2006 Freescale Semiconductor.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <pci.h>
/* Config the VIA chip */
void mpc85xx_config_via(struct pci_controller *hose,
pci_dev_t dev, struct pci_config_table *tab)
{
pci_dev_t bridge;
unsigned int cmdstat;
/* Enable USB and IDE functions */
pci_hose_write_config_byte(hose, dev, 0x48, 0x08);
pci_hose_read_config_dword(hose, dev, PCI_COMMAND, &cmdstat);
cmdstat |= PCI_COMMAND_IO | PCI_COMMAND_MEMORY| PCI_COMMAND_MASTER;
pci_hose_write_config_dword(hose, dev, PCI_COMMAND, cmdstat);
pci_hose_write_config_byte(hose, dev, PCI_CACHE_LINE_SIZE, 0x08);
pci_hose_write_config_byte(hose, dev, PCI_LATENCY_TIMER, 0x80);
/*
* Force the backplane P2P bridge to have a window
* open from 0x00000000-0x00001fff in PCI I/O space.
* This allows legacy I/O (i8259, etc) on the VIA
* southbridge to be accessed.
*/
bridge = PCI_BDF(0,BRIDGE_ID,0);
pci_hose_write_config_byte(hose, bridge, PCI_IO_BASE, 0);
pci_hose_write_config_word(hose, bridge, PCI_IO_BASE_UPPER16, 0);
pci_hose_write_config_byte(hose, bridge, PCI_IO_LIMIT, 0x10);
pci_hose_write_config_word(hose, bridge, PCI_IO_LIMIT_UPPER16, 0);
}
/* Function 1, IDE */
void mpc85xx_config_via_usbide(struct pci_controller *hose,
pci_dev_t dev, struct pci_config_table *tab)
{
pciauto_config_device(hose, dev);
/*
* Since the P2P window was forced to cover the fixed
* legacy I/O addresses, it is necessary to manually
* place the base addresses for the IDE and USB functions
* within this window.
*/
pci_hose_write_config_dword(hose, dev, PCI_BASE_ADDRESS_0, 0x1ff8);
pci_hose_write_config_dword(hose, dev, PCI_BASE_ADDRESS_1, 0x1ff4);
pci_hose_write_config_dword(hose, dev, PCI_BASE_ADDRESS_2, 0x1fe8);
pci_hose_write_config_dword(hose, dev, PCI_BASE_ADDRESS_3, 0x1fe4);
pci_hose_write_config_dword(hose, dev, PCI_BASE_ADDRESS_4, 0x1fd0);
}
/* Function 2, USB ports 0-1 */
void mpc85xx_config_via_usb(struct pci_controller *hose,
pci_dev_t dev, struct pci_config_table *tab)
{
pciauto_config_device(hose, dev);
pci_hose_write_config_dword(hose, dev, PCI_BASE_ADDRESS_4, 0x1fa0);
}
/* Function 3, USB ports 2-3 */
void mpc85xx_config_via_usb2(struct pci_controller *hose,
pci_dev_t dev, struct pci_config_table *tab)
{
pciauto_config_device(hose, dev);
pci_hose_write_config_dword(hose, dev, PCI_BASE_ADDRESS_4, 0x1f80);
}
/* Function 5, Power Management */
void mpc85xx_config_via_power(struct pci_controller *hose,
pci_dev_t dev, struct pci_config_table *tab)
{
pciauto_config_device(hose, dev);
pci_hose_write_config_dword(hose, dev, PCI_BASE_ADDRESS_0, 0x1e00);
pci_hose_write_config_dword(hose, dev, PCI_BASE_ADDRESS_1, 0x1dfc);
pci_hose_write_config_dword(hose, dev, PCI_BASE_ADDRESS_2, 0x1df8);
}
/* Function 6, AC97 Interface */
void mpc85xx_config_via_ac97(struct pci_controller *hose,
pci_dev_t dev, struct pci_config_table *tab)
{
pciauto_config_device(hose, dev);
pci_hose_write_config_dword(hose, dev, PCI_BASE_ADDRESS_0, 0x1c00);
}