| /* |
| * Copyright 2013 Freescale Semiconductor, Inc. |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #include <common.h> |
| #include <asm/io.h> |
| #include <asm/arch/imx-regs.h> |
| #include <asm/arch/clock.h> |
| #include <asm/arch/crm_regs.h> |
| #include <netdev.h> |
| #ifdef CONFIG_FSL_ESDHC |
| #include <fsl_esdhc.h> |
| #endif |
| |
| #ifdef CONFIG_FSL_ESDHC |
| DECLARE_GLOBAL_DATA_PTR; |
| #endif |
| |
| #ifdef CONFIG_MXC_OCOTP |
| void enable_ocotp_clk(unsigned char enable) |
| { |
| struct ccm_reg *ccm = (struct ccm_reg *)CCM_BASE_ADDR; |
| u32 reg; |
| |
| reg = readl(&ccm->ccgr6); |
| if (enable) |
| reg |= CCM_CCGR6_OCOTP_CTRL_MASK; |
| else |
| reg &= ~CCM_CCGR6_OCOTP_CTRL_MASK; |
| writel(reg, &ccm->ccgr6); |
| } |
| #endif |
| |
| static u32 get_mcu_main_clk(void) |
| { |
| struct ccm_reg *ccm = (struct ccm_reg *)CCM_BASE_ADDR; |
| u32 ccm_ccsr, ccm_cacrr, armclk_div; |
| u32 sysclk_sel, pll_pfd_sel = 0; |
| u32 freq = 0; |
| |
| ccm_ccsr = readl(&ccm->ccsr); |
| sysclk_sel = ccm_ccsr & CCM_CCSR_SYS_CLK_SEL_MASK; |
| sysclk_sel >>= CCM_CCSR_SYS_CLK_SEL_OFFSET; |
| |
| ccm_cacrr = readl(&ccm->cacrr); |
| armclk_div = ccm_cacrr & CCM_CACRR_ARM_CLK_DIV_MASK; |
| armclk_div >>= CCM_CACRR_ARM_CLK_DIV_OFFSET; |
| armclk_div += 1; |
| |
| switch (sysclk_sel) { |
| case 0: |
| freq = FASE_CLK_FREQ; |
| break; |
| case 1: |
| freq = SLOW_CLK_FREQ; |
| break; |
| case 2: |
| pll_pfd_sel = ccm_ccsr & CCM_CCSR_PLL2_PFD_CLK_SEL_MASK; |
| pll_pfd_sel >>= CCM_CCSR_PLL2_PFD_CLK_SEL_OFFSET; |
| if (pll_pfd_sel == 0) |
| freq = PLL2_MAIN_FREQ; |
| else if (pll_pfd_sel == 1) |
| freq = PLL2_PFD1_FREQ; |
| else if (pll_pfd_sel == 2) |
| freq = PLL2_PFD2_FREQ; |
| else if (pll_pfd_sel == 3) |
| freq = PLL2_PFD3_FREQ; |
| else if (pll_pfd_sel == 4) |
| freq = PLL2_PFD4_FREQ; |
| break; |
| case 3: |
| freq = PLL2_MAIN_FREQ; |
| break; |
| case 4: |
| pll_pfd_sel = ccm_ccsr & CCM_CCSR_PLL1_PFD_CLK_SEL_MASK; |
| pll_pfd_sel >>= CCM_CCSR_PLL1_PFD_CLK_SEL_OFFSET; |
| if (pll_pfd_sel == 0) |
| freq = PLL1_MAIN_FREQ; |
| else if (pll_pfd_sel == 1) |
| freq = PLL1_PFD1_FREQ; |
| else if (pll_pfd_sel == 2) |
| freq = PLL1_PFD2_FREQ; |
| else if (pll_pfd_sel == 3) |
| freq = PLL1_PFD3_FREQ; |
| else if (pll_pfd_sel == 4) |
| freq = PLL1_PFD4_FREQ; |
| break; |
| case 5: |
| freq = PLL3_MAIN_FREQ; |
| break; |
| default: |
| printf("unsupported system clock select\n"); |
| } |
| |
| return freq / armclk_div; |
| } |
| |
| static u32 get_bus_clk(void) |
| { |
| struct ccm_reg *ccm = (struct ccm_reg *)CCM_BASE_ADDR; |
| u32 ccm_cacrr, busclk_div; |
| |
| ccm_cacrr = readl(&ccm->cacrr); |
| |
| busclk_div = ccm_cacrr & CCM_CACRR_BUS_CLK_DIV_MASK; |
| busclk_div >>= CCM_CACRR_BUS_CLK_DIV_OFFSET; |
| busclk_div += 1; |
| |
| return get_mcu_main_clk() / busclk_div; |
| } |
| |
| static u32 get_ipg_clk(void) |
| { |
| struct ccm_reg *ccm = (struct ccm_reg *)CCM_BASE_ADDR; |
| u32 ccm_cacrr, ipgclk_div; |
| |
| ccm_cacrr = readl(&ccm->cacrr); |
| |
| ipgclk_div = ccm_cacrr & CCM_CACRR_IPG_CLK_DIV_MASK; |
| ipgclk_div >>= CCM_CACRR_IPG_CLK_DIV_OFFSET; |
| ipgclk_div += 1; |
| |
| return get_bus_clk() / ipgclk_div; |
| } |
| |
| static u32 get_uart_clk(void) |
| { |
| return get_ipg_clk(); |
| } |
| |
| static u32 get_sdhc_clk(void) |
| { |
| struct ccm_reg *ccm = (struct ccm_reg *)CCM_BASE_ADDR; |
| u32 ccm_cscmr1, ccm_cscdr2, sdhc_clk_sel, sdhc_clk_div; |
| u32 freq = 0; |
| |
| ccm_cscmr1 = readl(&ccm->cscmr1); |
| sdhc_clk_sel = ccm_cscmr1 & CCM_CSCMR1_ESDHC1_CLK_SEL_MASK; |
| sdhc_clk_sel >>= CCM_CSCMR1_ESDHC1_CLK_SEL_OFFSET; |
| |
| ccm_cscdr2 = readl(&ccm->cscdr2); |
| sdhc_clk_div = ccm_cscdr2 & CCM_CSCDR2_ESDHC1_CLK_DIV_MASK; |
| sdhc_clk_div >>= CCM_CSCDR2_ESDHC1_CLK_DIV_OFFSET; |
| sdhc_clk_div += 1; |
| |
| switch (sdhc_clk_sel) { |
| case 0: |
| freq = PLL3_MAIN_FREQ; |
| break; |
| case 1: |
| freq = PLL3_PFD3_FREQ; |
| break; |
| case 2: |
| freq = PLL1_PFD3_FREQ; |
| break; |
| case 3: |
| freq = get_bus_clk(); |
| break; |
| } |
| |
| return freq / sdhc_clk_div; |
| } |
| |
| u32 get_fec_clk(void) |
| { |
| struct ccm_reg *ccm = (struct ccm_reg *)CCM_BASE_ADDR; |
| u32 ccm_cscmr2, rmii_clk_sel; |
| u32 freq = 0; |
| |
| ccm_cscmr2 = readl(&ccm->cscmr2); |
| rmii_clk_sel = ccm_cscmr2 & CCM_CSCMR2_RMII_CLK_SEL_MASK; |
| rmii_clk_sel >>= CCM_CSCMR2_RMII_CLK_SEL_OFFSET; |
| |
| switch (rmii_clk_sel) { |
| case 0: |
| freq = ENET_EXTERNAL_CLK; |
| break; |
| case 1: |
| freq = AUDIO_EXTERNAL_CLK; |
| break; |
| case 2: |
| freq = PLL5_MAIN_FREQ; |
| break; |
| case 3: |
| freq = PLL5_MAIN_FREQ / 2; |
| break; |
| } |
| |
| return freq; |
| } |
| |
| unsigned int mxc_get_clock(enum mxc_clock clk) |
| { |
| switch (clk) { |
| case MXC_ARM_CLK: |
| return get_mcu_main_clk(); |
| case MXC_BUS_CLK: |
| return get_bus_clk(); |
| case MXC_IPG_CLK: |
| return get_ipg_clk(); |
| case MXC_UART_CLK: |
| return get_uart_clk(); |
| case MXC_ESDHC_CLK: |
| return get_sdhc_clk(); |
| case MXC_FEC_CLK: |
| return get_fec_clk(); |
| default: |
| break; |
| } |
| return -1; |
| } |
| |
| /* Dump some core clocks */ |
| int do_vf610_showclocks(cmd_tbl_t *cmdtp, int flag, int argc, |
| char * const argv[]) |
| { |
| printf("\n"); |
| printf("cpu clock : %8d MHz\n", mxc_get_clock(MXC_ARM_CLK) / 1000000); |
| printf("bus clock : %8d MHz\n", mxc_get_clock(MXC_BUS_CLK) / 1000000); |
| printf("ipg clock : %8d MHz\n", mxc_get_clock(MXC_IPG_CLK) / 1000000); |
| |
| return 0; |
| } |
| |
| U_BOOT_CMD( |
| clocks, CONFIG_SYS_MAXARGS, 1, do_vf610_showclocks, |
| "display clocks", |
| "" |
| ); |
| |
| #ifdef CONFIG_FEC_MXC |
| void imx_get_mac_from_fuse(int dev_id, unsigned char *mac) |
| { |
| struct ocotp_regs *ocotp = (struct ocotp_regs *)OCOTP_BASE_ADDR; |
| struct fuse_bank *bank = &ocotp->bank[4]; |
| struct fuse_bank4_regs *fuse = |
| (struct fuse_bank4_regs *)bank->fuse_regs; |
| |
| u32 value = readl(&fuse->mac_addr0); |
| mac[0] = (value >> 8); |
| mac[1] = value; |
| |
| value = readl(&fuse->mac_addr1); |
| mac[2] = value >> 24; |
| mac[3] = value >> 16; |
| mac[4] = value >> 8; |
| mac[5] = value; |
| } |
| #endif |
| |
| #if defined(CONFIG_DISPLAY_CPUINFO) |
| static char *get_reset_cause(void) |
| { |
| u32 cause; |
| struct src *src_regs = (struct src *)SRC_BASE_ADDR; |
| |
| cause = readl(&src_regs->srsr); |
| writel(cause, &src_regs->srsr); |
| cause &= 0xff; |
| |
| switch (cause) { |
| case 0x08: |
| return "WDOG"; |
| case 0x20: |
| return "JTAG HIGH-Z"; |
| case 0x80: |
| return "EXTERNAL RESET"; |
| case 0xfd: |
| return "POR"; |
| default: |
| return "unknown reset"; |
| } |
| } |
| |
| int print_cpuinfo(void) |
| { |
| printf("CPU: Freescale Vybrid VF610 at %d MHz\n", |
| mxc_get_clock(MXC_ARM_CLK) / 1000000); |
| printf("Reset cause: %s\n", get_reset_cause()); |
| |
| return 0; |
| } |
| #endif |
| |
| int cpu_eth_init(bd_t *bis) |
| { |
| int rc = -ENODEV; |
| |
| #if defined(CONFIG_FEC_MXC) |
| rc = fecmxc_initialize(bis); |
| #endif |
| |
| return rc; |
| } |
| |
| #ifdef CONFIG_FSL_ESDHC |
| int cpu_mmc_init(bd_t *bis) |
| { |
| return fsl_esdhc_mmc_init(bis); |
| } |
| #endif |
| |
| int get_clocks(void) |
| { |
| #ifdef CONFIG_FSL_ESDHC |
| gd->arch.sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK); |
| #endif |
| return 0; |
| } |