board/freescale/mx51evk/mx51evk.c - github/trini/u-boot - Gitiles

 /*
  * (C) Copyright 2009 Freescale Semiconductor, Inc.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
  * published by the Free Software Foundation; either version 2 of
  * the License, or (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  * MA 02111-1307 USA
  */

 #include <common.h>
 #include <asm/io.h>
 #include <asm/arch/imx-regs.h>
 #include <asm/arch/mx5x_pins.h>
 #include <asm/arch/iomux.h>
 #include <asm/errno.h>
 #include <asm/arch/sys_proto.h>
 #include <asm/arch/crm_regs.h>
 #include <i2c.h>
 #include <mmc.h>
 #include <fsl_esdhc.h>
 #include <fsl_pmic.h>
 #include <mc13892.h>

 DECLARE_GLOBAL_DATA_PTR;

 static u32 system_rev;

 #ifdef CONFIG_FSL_ESDHC
 struct fsl_esdhc_cfg esdhc_cfg[2] = {
 	{MMC_SDHC1_BASE_ADDR, 1},
 	{MMC_SDHC2_BASE_ADDR, 1},
 };
 #endif

 u32 get_board_rev(void)
 {
 	return system_rev;
 }

 int dram_init(void)
 {
 	/* dram_init must store complete ramsize in gd->ram_size */
 	gd->ram_size = get_ram_size((volatile void *)CONFIG_SYS_SDRAM_BASE,
 				PHYS_SDRAM_1_SIZE);
 	return 0;
 }

 static void setup_iomux_uart(void)
 {
 	unsigned int pad = PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE |
 			PAD_CTL_PUE_PULL | PAD_CTL_DRV_HIGH;

 	mxc_request_iomux(MX51_PIN_UART1_RXD, IOMUX_CONFIG_ALT0);
 	mxc_iomux_set_pad(MX51_PIN_UART1_RXD, pad | PAD_CTL_SRE_FAST);
 	mxc_request_iomux(MX51_PIN_UART1_TXD, IOMUX_CONFIG_ALT0);
 	mxc_iomux_set_pad(MX51_PIN_UART1_TXD, pad | PAD_CTL_SRE_FAST);
 	mxc_request_iomux(MX51_PIN_UART1_RTS, IOMUX_CONFIG_ALT0);
 	mxc_iomux_set_pad(MX51_PIN_UART1_RTS, pad);
 	mxc_request_iomux(MX51_PIN_UART1_CTS, IOMUX_CONFIG_ALT0);
 	mxc_iomux_set_pad(MX51_PIN_UART1_CTS, pad);
 }

 static void setup_iomux_fec(void)
 {
 	/*FEC_MDIO*/
 	mxc_request_iomux(MX51_PIN_EIM_EB2 , IOMUX_CONFIG_ALT3);
 	mxc_iomux_set_pad(MX51_PIN_EIM_EB2 , 0x1FD);

 	/*FEC_MDC*/
 	mxc_request_iomux(MX51_PIN_NANDF_CS3, IOMUX_CONFIG_ALT2);
 	mxc_iomux_set_pad(MX51_PIN_NANDF_CS3, 0x2004);

 	/* FEC RDATA[3] */
 	mxc_request_iomux(MX51_PIN_EIM_CS3, IOMUX_CONFIG_ALT3);
 	mxc_iomux_set_pad(MX51_PIN_EIM_CS3, 0x180);

 	/* FEC RDATA[2] */
 	mxc_request_iomux(MX51_PIN_EIM_CS2, IOMUX_CONFIG_ALT3);
 	mxc_iomux_set_pad(MX51_PIN_EIM_CS2, 0x180);

 	/* FEC RDATA[1] */
 	mxc_request_iomux(MX51_PIN_EIM_EB3, IOMUX_CONFIG_ALT3);
 	mxc_iomux_set_pad(MX51_PIN_EIM_EB3, 0x180);

 	/* FEC RDATA[0] */
 	mxc_request_iomux(MX51_PIN_NANDF_D9, IOMUX_CONFIG_ALT2);
 	mxc_iomux_set_pad(MX51_PIN_NANDF_D9, 0x2180);

 	/* FEC TDATA[3] */
 	mxc_request_iomux(MX51_PIN_NANDF_CS6, IOMUX_CONFIG_ALT2);
 	mxc_iomux_set_pad(MX51_PIN_NANDF_CS6, 0x2004);

 	/* FEC TDATA[2] */
 	mxc_request_iomux(MX51_PIN_NANDF_CS5, IOMUX_CONFIG_ALT2);
 	mxc_iomux_set_pad(MX51_PIN_NANDF_CS5, 0x2004);

 	/* FEC TDATA[1] */
 	mxc_request_iomux(MX51_PIN_NANDF_CS4, IOMUX_CONFIG_ALT2);
 	mxc_iomux_set_pad(MX51_PIN_NANDF_CS4, 0x2004);

 	/* FEC TDATA[0] */
 	mxc_request_iomux(MX51_PIN_NANDF_D8, IOMUX_CONFIG_ALT2);
 	mxc_iomux_set_pad(MX51_PIN_NANDF_D8, 0x2004);

 	/* FEC TX_EN */
 	mxc_request_iomux(MX51_PIN_NANDF_CS7, IOMUX_CONFIG_ALT1);
 	mxc_iomux_set_pad(MX51_PIN_NANDF_CS7, 0x2004);

 	/* FEC TX_ER */
 	mxc_request_iomux(MX51_PIN_NANDF_CS2, IOMUX_CONFIG_ALT2);
 	mxc_iomux_set_pad(MX51_PIN_NANDF_CS2, 0x2004);

 	/* FEC TX_CLK */
 	mxc_request_iomux(MX51_PIN_NANDF_RDY_INT, IOMUX_CONFIG_ALT1);
 	mxc_iomux_set_pad(MX51_PIN_NANDF_RDY_INT, 0x2180);

 	/* FEC TX_COL */
 	mxc_request_iomux(MX51_PIN_NANDF_RB2, IOMUX_CONFIG_ALT1);
 	mxc_iomux_set_pad(MX51_PIN_NANDF_RB2, 0x2180);

 	/* FEC RX_CLK */
 	mxc_request_iomux(MX51_PIN_NANDF_RB3, IOMUX_CONFIG_ALT1);
 	mxc_iomux_set_pad(MX51_PIN_NANDF_RB3, 0x2180);

 	/* FEC RX_CRS */
 	mxc_request_iomux(MX51_PIN_EIM_CS5, IOMUX_CONFIG_ALT3);
 	mxc_iomux_set_pad(MX51_PIN_EIM_CS5, 0x180);

 	/* FEC RX_ER */
 	mxc_request_iomux(MX51_PIN_EIM_CS4, IOMUX_CONFIG_ALT3);
 	mxc_iomux_set_pad(MX51_PIN_EIM_CS4, 0x180);

 	/* FEC RX_DV */
 	mxc_request_iomux(MX51_PIN_NANDF_D11, IOMUX_CONFIG_ALT2);
 	mxc_iomux_set_pad(MX51_PIN_NANDF_D11, 0x2180);
 }

 #ifdef CONFIG_MXC_SPI
 static void setup_iomux_spi(void)
 {
 	/* 000: Select mux mode: ALT0 mux port: MOSI of instance: ecspi1 */
 	mxc_request_iomux(MX51_PIN_CSPI1_MOSI, IOMUX_CONFIG_ALT0);
 	mxc_iomux_set_pad(MX51_PIN_CSPI1_MOSI, 0x105);

 	/* 000: Select mux mode: ALT0 mux port: MISO of instance: ecspi1. */
 	mxc_request_iomux(MX51_PIN_CSPI1_MISO, IOMUX_CONFIG_ALT0);
 	mxc_iomux_set_pad(MX51_PIN_CSPI1_MISO, 0x105);

 	/* de-select SS1 of instance: ecspi1. */
 	mxc_request_iomux(MX51_PIN_CSPI1_SS1, IOMUX_CONFIG_ALT3);
 	mxc_iomux_set_pad(MX51_PIN_CSPI1_SS1, 0x85);

 	/* 000: Select mux mode: ALT0 mux port: SS0 ecspi1 */
 	mxc_request_iomux(MX51_PIN_CSPI1_SS0, IOMUX_CONFIG_ALT0);
 	mxc_iomux_set_pad(MX51_PIN_CSPI1_SS0, 0x185);

 	/* 000: Select mux mode: ALT0 mux port: RDY of instance: ecspi1. */
 	mxc_request_iomux(MX51_PIN_CSPI1_RDY, IOMUX_CONFIG_ALT0);
 	mxc_iomux_set_pad(MX51_PIN_CSPI1_RDY, 0x180);

 	/* 000: Select mux mode: ALT0 mux port: SCLK of instance: ecspi1. */
 	mxc_request_iomux(MX51_PIN_CSPI1_SCLK, IOMUX_CONFIG_ALT0);
 	mxc_iomux_set_pad(MX51_PIN_CSPI1_SCLK, 0x105);
 }
 #endif

 static void power_init(void)
 {
 	unsigned int val;
 	unsigned int reg;
 	struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)MXC_CCM_BASE;

 	/* Write needed to Power Gate 2 register */
 	val = pmic_reg_read(REG_POWER_MISC);
 	val &= ~PWGT2SPIEN;
 	pmic_reg_write(REG_POWER_MISC, val);

 	/* Externally powered */
 	val = pmic_reg_read(REG_CHARGE);
 	val |= ICHRG0 | ICHRG1 | ICHRG2 | ICHRG3 | CHGAUTOB;
 	pmic_reg_write(REG_CHARGE, val);

 	/* power up the system first */
 	pmic_reg_write(REG_POWER_MISC, PWUP);

 	/* Set core voltage to 1.1V */
 	val = pmic_reg_read(REG_SW_0);
 	val = (val & ~SWx_VOLT_MASK) | SWx_1_100V;
 	pmic_reg_write(REG_SW_0, val);

 	/* Setup VCC (SW2) to 1.25 */
 	val = pmic_reg_read(REG_SW_1);
 	val = (val & ~SWx_VOLT_MASK) | SWx_1_250V;
 	pmic_reg_write(REG_SW_1, val);

 	/* Setup 1V2_DIG1 (SW3) to 1.25 */
 	val = pmic_reg_read(REG_SW_2);
 	val = (val & ~SWx_VOLT_MASK) | SWx_1_250V;
 	pmic_reg_write(REG_SW_2, val);
 	udelay(50);

 	/* Raise the core frequency to 800MHz */
 	writel(0x0, &mxc_ccm->cacrr);

 	/* Set switchers in Auto in NORMAL mode & STANDBY mode */
 	/* Setup the switcher mode for SW1 & SW2*/
 	val = pmic_reg_read(REG_SW_4);
 	val = (val & ~((SWMODE_MASK << SWMODE1_SHIFT) |
 		(SWMODE_MASK << SWMODE2_SHIFT)));
 	val |= (SWMODE_AUTO_AUTO << SWMODE1_SHIFT) |
 		(SWMODE_AUTO_AUTO << SWMODE2_SHIFT);
 	pmic_reg_write(REG_SW_4, val);

 	/* Setup the switcher mode for SW3 & SW4 */
 	val = pmic_reg_read(REG_SW_5);
 	val = (val & ~((SWMODE_MASK << SWMODE3_SHIFT) |
 		(SWMODE_MASK << SWMODE4_SHIFT)));
 	val |= (SWMODE_AUTO_AUTO << SWMODE3_SHIFT) |
 		(SWMODE_AUTO_AUTO << SWMODE4_SHIFT);
 	pmic_reg_write(REG_SW_5, val);

 	/* Set VDIG to 1.65V, VGEN3 to 1.8V, VCAM to 2.6V */
 	val = pmic_reg_read(REG_SETTING_0);
 	val &= ~(VCAM_MASK | VGEN3_MASK | VDIG_MASK);
 	val |= VDIG_1_65 | VGEN3_1_8 | VCAM_2_6;
 	pmic_reg_write(REG_SETTING_0, val);

 	/* Set VVIDEO to 2.775V, VAUDIO to 3V, VSD to 3.15V */
 	val = pmic_reg_read(REG_SETTING_1);
 	val &= ~(VVIDEO_MASK | VSD_MASK | VAUDIO_MASK);
 	val |= VSD_3_15 | VAUDIO_3_0 | VVIDEO_2_775;
 	pmic_reg_write(REG_SETTING_1, val);

 	/* Configure VGEN3 and VCAM regulators to use external PNP */
 	val = VGEN3CONFIG | VCAMCONFIG;
 	pmic_reg_write(REG_MODE_1, val);
 	udelay(200);

 	reg = readl(GPIO2_BASE_ADDR + 0x0);
 	reg &= ~0x4000;  /* Lower reset line */
 	writel(reg, GPIO2_BASE_ADDR + 0x0);

 	reg = readl(GPIO2_BASE_ADDR + 0x4);
 	reg |= 0x4000;	/* configure GPIO lines as output */
 	writel(reg, GPIO2_BASE_ADDR + 0x4);

 	/* Reset the ethernet controller over GPIO */
 	writel(0x1, IOMUXC_BASE_ADDR + 0x0AC);

 	/* Enable VGEN3, VCAM, VAUDIO, VVIDEO, VSD regulators */
 	val = VGEN3EN | VGEN3CONFIG | VCAMEN | VCAMCONFIG |
 		VVIDEOEN | VAUDIOEN  | VSDEN;
 	pmic_reg_write(REG_MODE_1, val);

 	udelay(500);

 	reg = readl(GPIO2_BASE_ADDR + 0x0);
 	reg |= 0x4000;
 	writel(reg, GPIO2_BASE_ADDR + 0x0);
 }

 #ifdef CONFIG_FSL_ESDHC
 int board_mmc_getcd(u8 *cd, struct mmc *mmc)
 {
 	struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;

 	if (cfg->esdhc_base == MMC_SDHC1_BASE_ADDR)
 		*cd = readl(GPIO1_BASE_ADDR) & 0x01;
 	else
 		*cd = readl(GPIO1_BASE_ADDR) & 0x40;

 	return 0;
 }

 int board_mmc_init(bd_t *bis)
 {
 	u32 index;
 	s32 status = 0;

 	for (index = 0; index < CONFIG_SYS_FSL_ESDHC_NUM;
 			index++) {
 		switch (index) {
 		case 0:
 			mxc_request_iomux(MX51_PIN_SD1_CMD,
 				IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
 			mxc_request_iomux(MX51_PIN_SD1_CLK,
 				IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
 			mxc_request_iomux(MX51_PIN_SD1_DATA0,
 				IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
 			mxc_request_iomux(MX51_PIN_SD1_DATA1,
 				IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
 			mxc_request_iomux(MX51_PIN_SD1_DATA2,
 				IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
 			mxc_request_iomux(MX51_PIN_SD1_DATA3,
 				IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
 			mxc_iomux_set_pad(MX51_PIN_SD1_CMD,
 				PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH |
 				PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU |
 				PAD_CTL_PUE_PULL |
 				PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST);
 			mxc_iomux_set_pad(MX51_PIN_SD1_CLK,
 				PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH |
 				PAD_CTL_HYS_NONE | PAD_CTL_47K_PU |
 				PAD_CTL_PUE_PULL |
 				PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST);
 			mxc_iomux_set_pad(MX51_PIN_SD1_DATA0,
 				PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH |
 				PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU |
 				PAD_CTL_PUE_PULL |
 				PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST);
 			mxc_iomux_set_pad(MX51_PIN_SD1_DATA1,
 				PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH |
 				PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU |
 				PAD_CTL_PUE_PULL |
 				PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST);
 			mxc_iomux_set_pad(MX51_PIN_SD1_DATA2,
 				PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH |
 				PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU |
 				PAD_CTL_PUE_PULL |
 				PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST);
 			mxc_iomux_set_pad(MX51_PIN_SD1_DATA3,
 				PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH |
 				PAD_CTL_HYS_ENABLE | PAD_CTL_100K_PD |
 				PAD_CTL_PUE_PULL |
 				PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST);
 			mxc_request_iomux(MX51_PIN_GPIO1_0,
 				IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
 			mxc_iomux_set_pad(MX51_PIN_GPIO1_0,
 				PAD_CTL_HYS_ENABLE);
 			mxc_request_iomux(MX51_PIN_GPIO1_1,
 				IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
 			mxc_iomux_set_pad(MX51_PIN_GPIO1_1,
 				PAD_CTL_HYS_ENABLE);
 			break;
 		case 1:
 			mxc_request_iomux(MX51_PIN_SD2_CMD,
 				IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
 			mxc_request_iomux(MX51_PIN_SD2_CLK,
 				IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
 			mxc_request_iomux(MX51_PIN_SD2_DATA0,
 				IOMUX_CONFIG_ALT0);
 			mxc_request_iomux(MX51_PIN_SD2_DATA1,
 				IOMUX_CONFIG_ALT0);
 			mxc_request_iomux(MX51_PIN_SD2_DATA2,
 				IOMUX_CONFIG_ALT0);
 			mxc_request_iomux(MX51_PIN_SD2_DATA3,
 				IOMUX_CONFIG_ALT0);
 			mxc_iomux_set_pad(MX51_PIN_SD2_CMD,
 				PAD_CTL_DRV_MAX | PAD_CTL_22K_PU |
 				PAD_CTL_SRE_FAST);
 			mxc_iomux_set_pad(MX51_PIN_SD2_CLK,
 				PAD_CTL_DRV_MAX | PAD_CTL_22K_PU |
 				PAD_CTL_SRE_FAST);
 			mxc_iomux_set_pad(MX51_PIN_SD2_DATA0,
 				PAD_CTL_DRV_MAX | PAD_CTL_22K_PU |
 				PAD_CTL_SRE_FAST);
 			mxc_iomux_set_pad(MX51_PIN_SD2_DATA1,
 				PAD_CTL_DRV_MAX | PAD_CTL_22K_PU |
 				PAD_CTL_SRE_FAST);
 			mxc_iomux_set_pad(MX51_PIN_SD2_DATA2,
 				PAD_CTL_DRV_MAX | PAD_CTL_22K_PU |
 				PAD_CTL_SRE_FAST);
 			mxc_iomux_set_pad(MX51_PIN_SD2_DATA3,
 				PAD_CTL_DRV_MAX | PAD_CTL_22K_PU |
 				PAD_CTL_SRE_FAST);
 			mxc_request_iomux(MX51_PIN_SD2_CMD,
 				IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
 			mxc_request_iomux(MX51_PIN_GPIO1_6,
 				IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
 			mxc_iomux_set_pad(MX51_PIN_GPIO1_6,
 				PAD_CTL_HYS_ENABLE);
 			mxc_request_iomux(MX51_PIN_GPIO1_5,
 				IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
 			mxc_iomux_set_pad(MX51_PIN_GPIO1_5,
 				PAD_CTL_HYS_ENABLE);
 			break;
 		default:
 			printf("Warning: you configured more ESDHC controller"
 				"(%d) as supported by the board(2)\n",
 				CONFIG_SYS_FSL_ESDHC_NUM);
 			return status;
 		}
 		status |= fsl_esdhc_initialize(bis, &esdhc_cfg[index]);
 	}
 	return status;
 }
 #endif

 int board_early_init_f(void)
 {
 	setup_iomux_uart();
 	setup_iomux_fec();

 	return 0;
 }

 int board_init(void)
 {
 	system_rev = get_cpu_rev();

 	gd->bd->bi_arch_number = MACH_TYPE_MX51_BABBAGE;
 	/* address of boot parameters */
 	gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;

 	return 0;
 }

 #ifdef BOARD_LATE_INIT
 int board_late_init(void)
 {
 #ifdef CONFIG_MXC_SPI
 	setup_iomux_spi();
 	power_init();
 #endif
 	return 0;
 }
 #endif

 int checkboard(void)
 {
 	puts("Board: MX51EVK ");

 	switch (system_rev & 0xff) {
 	case CHIP_REV_3_0:
 		puts("3.0 [");
 		break;
 	case CHIP_REV_2_5:
 		puts("2.5 [");
 		break;
 	case CHIP_REV_2_0:
 		puts("2.0 [");
 		break;
 	case CHIP_REV_1_1:
 		puts("1.1 [");
 		break;
 	case CHIP_REV_1_0:
 	default:
 		puts("1.0 [");
 		break;
 	}

 	switch (__raw_readl(SRC_BASE_ADDR + 0x8)) {
 	case 0x0001:
 		puts("POR");
 		break;
 	case 0x0009:
 		puts("RST");
 		break;
 	case 0x0010:
 	case 0x0011:
 		puts("WDOG");
 		break;
 	default:
 		puts("unknown");
 	}
 	puts("]\n");
 	return 0;
 }
	/*
	* (C) Copyright 2009 Freescale Semiconductor, Inc.
	*
	* See file CREDITS for list of people who contributed to this
	* project.
	*
	* This program is free software; you can redistribute it and/or
	* modify it under the terms of the GNU General Public License as
	* published by the Free Software Foundation; either version 2 of
	* the License, or (at your option) any later version.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; if not, write to the Free Software
	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	* MA 02111-1307 USA
	*/

	#include <common.h>
	#include <asm/io.h>
	#include <asm/arch/imx-regs.h>
	#include <asm/arch/mx5x_pins.h>
	#include <asm/arch/iomux.h>
	#include <asm/errno.h>
	#include <asm/arch/sys_proto.h>
	#include <asm/arch/crm_regs.h>
	#include <i2c.h>
	#include <mmc.h>
	#include <fsl_esdhc.h>
	#include <fsl_pmic.h>
	#include <mc13892.h>

	DECLARE_GLOBAL_DATA_PTR;

	static u32 system_rev;

	#ifdef CONFIG_FSL_ESDHC
	struct fsl_esdhc_cfg esdhc_cfg[2] = {
	{MMC_SDHC1_BASE_ADDR, 1},
	{MMC_SDHC2_BASE_ADDR, 1},
	};
	#endif

	u32 get_board_rev(void)
	{
	return system_rev;
	}

	int dram_init(void)
	{
	/* dram_init must store complete ramsize in gd->ram_size */
	gd->ram_size = get_ram_size((volatile void *)CONFIG_SYS_SDRAM_BASE,
	PHYS_SDRAM_1_SIZE);
	return 0;
	}

	static void setup_iomux_uart(void)
	{
	unsigned int pad = PAD_CTL_HYS_ENABLE \| PAD_CTL_PKE_ENABLE \|
	PAD_CTL_PUE_PULL \| PAD_CTL_DRV_HIGH;

	mxc_request_iomux(MX51_PIN_UART1_RXD, IOMUX_CONFIG_ALT0);
	mxc_iomux_set_pad(MX51_PIN_UART1_RXD, pad \| PAD_CTL_SRE_FAST);
	mxc_request_iomux(MX51_PIN_UART1_TXD, IOMUX_CONFIG_ALT0);
	mxc_iomux_set_pad(MX51_PIN_UART1_TXD, pad \| PAD_CTL_SRE_FAST);
	mxc_request_iomux(MX51_PIN_UART1_RTS, IOMUX_CONFIG_ALT0);
	mxc_iomux_set_pad(MX51_PIN_UART1_RTS, pad);
	mxc_request_iomux(MX51_PIN_UART1_CTS, IOMUX_CONFIG_ALT0);
	mxc_iomux_set_pad(MX51_PIN_UART1_CTS, pad);
	}

	static void setup_iomux_fec(void)
	{
	/FEC_MDIO/
	mxc_request_iomux(MX51_PIN_EIM_EB2 , IOMUX_CONFIG_ALT3);
	mxc_iomux_set_pad(MX51_PIN_EIM_EB2 , 0x1FD);

	/FEC_MDC/
	mxc_request_iomux(MX51_PIN_NANDF_CS3, IOMUX_CONFIG_ALT2);
	mxc_iomux_set_pad(MX51_PIN_NANDF_CS3, 0x2004);

	/* FEC RDATA[3] */
	mxc_request_iomux(MX51_PIN_EIM_CS3, IOMUX_CONFIG_ALT3);
	mxc_iomux_set_pad(MX51_PIN_EIM_CS3, 0x180);

	/* FEC RDATA[2] */
	mxc_request_iomux(MX51_PIN_EIM_CS2, IOMUX_CONFIG_ALT3);
	mxc_iomux_set_pad(MX51_PIN_EIM_CS2, 0x180);

	/* FEC RDATA[1] */
	mxc_request_iomux(MX51_PIN_EIM_EB3, IOMUX_CONFIG_ALT3);
	mxc_iomux_set_pad(MX51_PIN_EIM_EB3, 0x180);

	/* FEC RDATA[0] */
	mxc_request_iomux(MX51_PIN_NANDF_D9, IOMUX_CONFIG_ALT2);
	mxc_iomux_set_pad(MX51_PIN_NANDF_D9, 0x2180);

	/* FEC TDATA[3] */
	mxc_request_iomux(MX51_PIN_NANDF_CS6, IOMUX_CONFIG_ALT2);
	mxc_iomux_set_pad(MX51_PIN_NANDF_CS6, 0x2004);

	/* FEC TDATA[2] */
	mxc_request_iomux(MX51_PIN_NANDF_CS5, IOMUX_CONFIG_ALT2);
	mxc_iomux_set_pad(MX51_PIN_NANDF_CS5, 0x2004);

	/* FEC TDATA[1] */
	mxc_request_iomux(MX51_PIN_NANDF_CS4, IOMUX_CONFIG_ALT2);
	mxc_iomux_set_pad(MX51_PIN_NANDF_CS4, 0x2004);

	/* FEC TDATA[0] */
	mxc_request_iomux(MX51_PIN_NANDF_D8, IOMUX_CONFIG_ALT2);
	mxc_iomux_set_pad(MX51_PIN_NANDF_D8, 0x2004);

	/* FEC TX_EN */
	mxc_request_iomux(MX51_PIN_NANDF_CS7, IOMUX_CONFIG_ALT1);
	mxc_iomux_set_pad(MX51_PIN_NANDF_CS7, 0x2004);

	/* FEC TX_ER */
	mxc_request_iomux(MX51_PIN_NANDF_CS2, IOMUX_CONFIG_ALT2);
	mxc_iomux_set_pad(MX51_PIN_NANDF_CS2, 0x2004);

	/* FEC TX_CLK */
	mxc_request_iomux(MX51_PIN_NANDF_RDY_INT, IOMUX_CONFIG_ALT1);
	mxc_iomux_set_pad(MX51_PIN_NANDF_RDY_INT, 0x2180);

	/* FEC TX_COL */
	mxc_request_iomux(MX51_PIN_NANDF_RB2, IOMUX_CONFIG_ALT1);
	mxc_iomux_set_pad(MX51_PIN_NANDF_RB2, 0x2180);

	/* FEC RX_CLK */
	mxc_request_iomux(MX51_PIN_NANDF_RB3, IOMUX_CONFIG_ALT1);
	mxc_iomux_set_pad(MX51_PIN_NANDF_RB3, 0x2180);

	/* FEC RX_CRS */
	mxc_request_iomux(MX51_PIN_EIM_CS5, IOMUX_CONFIG_ALT3);
	mxc_iomux_set_pad(MX51_PIN_EIM_CS5, 0x180);

	/* FEC RX_ER */
	mxc_request_iomux(MX51_PIN_EIM_CS4, IOMUX_CONFIG_ALT3);
	mxc_iomux_set_pad(MX51_PIN_EIM_CS4, 0x180);

	/* FEC RX_DV */
	mxc_request_iomux(MX51_PIN_NANDF_D11, IOMUX_CONFIG_ALT2);
	mxc_iomux_set_pad(MX51_PIN_NANDF_D11, 0x2180);
	}

	#ifdef CONFIG_MXC_SPI
	static void setup_iomux_spi(void)
	{
	/* 000: Select mux mode: ALT0 mux port: MOSI of instance: ecspi1 */
	mxc_request_iomux(MX51_PIN_CSPI1_MOSI, IOMUX_CONFIG_ALT0);
	mxc_iomux_set_pad(MX51_PIN_CSPI1_MOSI, 0x105);

	/* 000: Select mux mode: ALT0 mux port: MISO of instance: ecspi1. */
	mxc_request_iomux(MX51_PIN_CSPI1_MISO, IOMUX_CONFIG_ALT0);
	mxc_iomux_set_pad(MX51_PIN_CSPI1_MISO, 0x105);

	/* de-select SS1 of instance: ecspi1. */
	mxc_request_iomux(MX51_PIN_CSPI1_SS1, IOMUX_CONFIG_ALT3);
	mxc_iomux_set_pad(MX51_PIN_CSPI1_SS1, 0x85);

	/* 000: Select mux mode: ALT0 mux port: SS0 ecspi1 */
	mxc_request_iomux(MX51_PIN_CSPI1_SS0, IOMUX_CONFIG_ALT0);
	mxc_iomux_set_pad(MX51_PIN_CSPI1_SS0, 0x185);

	/* 000: Select mux mode: ALT0 mux port: RDY of instance: ecspi1. */
	mxc_request_iomux(MX51_PIN_CSPI1_RDY, IOMUX_CONFIG_ALT0);
	mxc_iomux_set_pad(MX51_PIN_CSPI1_RDY, 0x180);

	/* 000: Select mux mode: ALT0 mux port: SCLK of instance: ecspi1. */
	mxc_request_iomux(MX51_PIN_CSPI1_SCLK, IOMUX_CONFIG_ALT0);
	mxc_iomux_set_pad(MX51_PIN_CSPI1_SCLK, 0x105);
	}
	#endif

	static void power_init(void)
	{
	unsigned int val;
	unsigned int reg;
	struct mxc_ccm_reg mxc_ccm = (struct mxc_ccm_reg )MXC_CCM_BASE;

	/* Write needed to Power Gate 2 register */
	val = pmic_reg_read(REG_POWER_MISC);
	val &= ~PWGT2SPIEN;
	pmic_reg_write(REG_POWER_MISC, val);

	/* Externally powered */
	val = pmic_reg_read(REG_CHARGE);
	val \|= ICHRG0 \| ICHRG1 \| ICHRG2 \| ICHRG3 \| CHGAUTOB;
	pmic_reg_write(REG_CHARGE, val);

	/* power up the system first */
	pmic_reg_write(REG_POWER_MISC, PWUP);

	/* Set core voltage to 1.1V */
	val = pmic_reg_read(REG_SW_0);
	val = (val & ~SWx_VOLT_MASK) \| SWx_1_100V;
	pmic_reg_write(REG_SW_0, val);

	/* Setup VCC (SW2) to 1.25 */
	val = pmic_reg_read(REG_SW_1);
	val = (val & ~SWx_VOLT_MASK) \| SWx_1_250V;
	pmic_reg_write(REG_SW_1, val);

	/* Setup 1V2_DIG1 (SW3) to 1.25 */
	val = pmic_reg_read(REG_SW_2);
	val = (val & ~SWx_VOLT_MASK) \| SWx_1_250V;
	pmic_reg_write(REG_SW_2, val);
	udelay(50);

	/* Raise the core frequency to 800MHz */
	writel(0x0, &mxc_ccm->cacrr);

	/* Set switchers in Auto in NORMAL mode & STANDBY mode */
	/* Setup the switcher mode for SW1 & SW2*/
	val = pmic_reg_read(REG_SW_4);
	val = (val & ~((SWMODE_MASK << SWMODE1_SHIFT) \|
	(SWMODE_MASK << SWMODE2_SHIFT)));
	val \|= (SWMODE_AUTO_AUTO << SWMODE1_SHIFT) \|
	(SWMODE_AUTO_AUTO << SWMODE2_SHIFT);
	pmic_reg_write(REG_SW_4, val);

	/* Setup the switcher mode for SW3 & SW4 */
	val = pmic_reg_read(REG_SW_5);
	val = (val & ~((SWMODE_MASK << SWMODE3_SHIFT) \|
	(SWMODE_MASK << SWMODE4_SHIFT)));
	val \|= (SWMODE_AUTO_AUTO << SWMODE3_SHIFT) \|
	(SWMODE_AUTO_AUTO << SWMODE4_SHIFT);
	pmic_reg_write(REG_SW_5, val);

	/* Set VDIG to 1.65V, VGEN3 to 1.8V, VCAM to 2.6V */
	val = pmic_reg_read(REG_SETTING_0);
	val &= ~(VCAM_MASK \| VGEN3_MASK \| VDIG_MASK);
	val \|= VDIG_1_65 \| VGEN3_1_8 \| VCAM_2_6;
	pmic_reg_write(REG_SETTING_0, val);

	/* Set VVIDEO to 2.775V, VAUDIO to 3V, VSD to 3.15V */
	val = pmic_reg_read(REG_SETTING_1);
	val &= ~(VVIDEO_MASK \| VSD_MASK \| VAUDIO_MASK);
	val \|= VSD_3_15 \| VAUDIO_3_0 \| VVIDEO_2_775;
	pmic_reg_write(REG_SETTING_1, val);

	/* Configure VGEN3 and VCAM regulators to use external PNP */
	val = VGEN3CONFIG \| VCAMCONFIG;
	pmic_reg_write(REG_MODE_1, val);
	udelay(200);

	reg = readl(GPIO2_BASE_ADDR + 0x0);
	reg &= ~0x4000; /* Lower reset line */
	writel(reg, GPIO2_BASE_ADDR + 0x0);

	reg = readl(GPIO2_BASE_ADDR + 0x4);
	reg \|= 0x4000; /* configure GPIO lines as output */
	writel(reg, GPIO2_BASE_ADDR + 0x4);

	/* Reset the ethernet controller over GPIO */
	writel(0x1, IOMUXC_BASE_ADDR + 0x0AC);

	/* Enable VGEN3, VCAM, VAUDIO, VVIDEO, VSD regulators */
	val = VGEN3EN \| VGEN3CONFIG \| VCAMEN \| VCAMCONFIG \|
	VVIDEOEN \| VAUDIOEN \| VSDEN;
	pmic_reg_write(REG_MODE_1, val);

	udelay(500);

	reg = readl(GPIO2_BASE_ADDR + 0x0);
	reg \|= 0x4000;
	writel(reg, GPIO2_BASE_ADDR + 0x0);
	}

	#ifdef CONFIG_FSL_ESDHC
	int board_mmc_getcd(u8 cd, struct mmc mmc)
	{
	struct fsl_esdhc_cfg cfg = (struct fsl_esdhc_cfg )mmc->priv;

	if (cfg->esdhc_base == MMC_SDHC1_BASE_ADDR)
	*cd = readl(GPIO1_BASE_ADDR) & 0x01;
	else
	*cd = readl(GPIO1_BASE_ADDR) & 0x40;

	return 0;
	}

	int board_mmc_init(bd_t *bis)
	{
	u32 index;
	s32 status = 0;

	for (index = 0; index < CONFIG_SYS_FSL_ESDHC_NUM;
	index++) {
	switch (index) {
	case 0:
	mxc_request_iomux(MX51_PIN_SD1_CMD,
	IOMUX_CONFIG_ALT0 \| IOMUX_CONFIG_SION);
	mxc_request_iomux(MX51_PIN_SD1_CLK,
	IOMUX_CONFIG_ALT0 \| IOMUX_CONFIG_SION);
	mxc_request_iomux(MX51_PIN_SD1_DATA0,
	IOMUX_CONFIG_ALT0 \| IOMUX_CONFIG_SION);
	mxc_request_iomux(MX51_PIN_SD1_DATA1,
	IOMUX_CONFIG_ALT0 \| IOMUX_CONFIG_SION);
	mxc_request_iomux(MX51_PIN_SD1_DATA2,
	IOMUX_CONFIG_ALT0 \| IOMUX_CONFIG_SION);
	mxc_request_iomux(MX51_PIN_SD1_DATA3,
	IOMUX_CONFIG_ALT0 \| IOMUX_CONFIG_SION);
	mxc_iomux_set_pad(MX51_PIN_SD1_CMD,
	PAD_CTL_DRV_MAX \| PAD_CTL_DRV_VOT_HIGH \|
	PAD_CTL_HYS_ENABLE \| PAD_CTL_47K_PU \|
	PAD_CTL_PUE_PULL \|
	PAD_CTL_PKE_ENABLE \| PAD_CTL_SRE_FAST);
	mxc_iomux_set_pad(MX51_PIN_SD1_CLK,
	PAD_CTL_DRV_MAX \| PAD_CTL_DRV_VOT_HIGH \|
	PAD_CTL_HYS_NONE \| PAD_CTL_47K_PU \|
	PAD_CTL_PUE_PULL \|
	PAD_CTL_PKE_ENABLE \| PAD_CTL_SRE_FAST);
	mxc_iomux_set_pad(MX51_PIN_SD1_DATA0,
	PAD_CTL_DRV_MAX \| PAD_CTL_DRV_VOT_HIGH \|
	PAD_CTL_HYS_ENABLE \| PAD_CTL_47K_PU \|
	PAD_CTL_PUE_PULL \|
	PAD_CTL_PKE_ENABLE \| PAD_CTL_SRE_FAST);
	mxc_iomux_set_pad(MX51_PIN_SD1_DATA1,
	PAD_CTL_DRV_MAX \| PAD_CTL_DRV_VOT_HIGH \|
	PAD_CTL_HYS_ENABLE \| PAD_CTL_47K_PU \|
	PAD_CTL_PUE_PULL \|
	PAD_CTL_PKE_ENABLE \| PAD_CTL_SRE_FAST);
	mxc_iomux_set_pad(MX51_PIN_SD1_DATA2,
	PAD_CTL_DRV_MAX \| PAD_CTL_DRV_VOT_HIGH \|
	PAD_CTL_HYS_ENABLE \| PAD_CTL_47K_PU \|
	PAD_CTL_PUE_PULL \|
	PAD_CTL_PKE_ENABLE \| PAD_CTL_SRE_FAST);
	mxc_iomux_set_pad(MX51_PIN_SD1_DATA3,
	PAD_CTL_DRV_MAX \| PAD_CTL_DRV_VOT_HIGH \|
	PAD_CTL_HYS_ENABLE \| PAD_CTL_100K_PD \|
	PAD_CTL_PUE_PULL \|
	PAD_CTL_PKE_ENABLE \| PAD_CTL_SRE_FAST);
	mxc_request_iomux(MX51_PIN_GPIO1_0,
	IOMUX_CONFIG_ALT0 \| IOMUX_CONFIG_SION);
	mxc_iomux_set_pad(MX51_PIN_GPIO1_0,
	PAD_CTL_HYS_ENABLE);
	mxc_request_iomux(MX51_PIN_GPIO1_1,
	IOMUX_CONFIG_ALT0 \| IOMUX_CONFIG_SION);
	mxc_iomux_set_pad(MX51_PIN_GPIO1_1,
	PAD_CTL_HYS_ENABLE);
	break;
	case 1:
	mxc_request_iomux(MX51_PIN_SD2_CMD,
	IOMUX_CONFIG_ALT0 \| IOMUX_CONFIG_SION);
	mxc_request_iomux(MX51_PIN_SD2_CLK,
	IOMUX_CONFIG_ALT0 \| IOMUX_CONFIG_SION);
	mxc_request_iomux(MX51_PIN_SD2_DATA0,
	IOMUX_CONFIG_ALT0);
	mxc_request_iomux(MX51_PIN_SD2_DATA1,
	IOMUX_CONFIG_ALT0);
	mxc_request_iomux(MX51_PIN_SD2_DATA2,
	IOMUX_CONFIG_ALT0);
	mxc_request_iomux(MX51_PIN_SD2_DATA3,
	IOMUX_CONFIG_ALT0);
	mxc_iomux_set_pad(MX51_PIN_SD2_CMD,
	PAD_CTL_DRV_MAX \| PAD_CTL_22K_PU \|
	PAD_CTL_SRE_FAST);
	mxc_iomux_set_pad(MX51_PIN_SD2_CLK,
	PAD_CTL_DRV_MAX \| PAD_CTL_22K_PU \|
	PAD_CTL_SRE_FAST);
	mxc_iomux_set_pad(MX51_PIN_SD2_DATA0,
	PAD_CTL_DRV_MAX \| PAD_CTL_22K_PU \|
	PAD_CTL_SRE_FAST);
	mxc_iomux_set_pad(MX51_PIN_SD2_DATA1,
	PAD_CTL_DRV_MAX \| PAD_CTL_22K_PU \|
	PAD_CTL_SRE_FAST);
	mxc_iomux_set_pad(MX51_PIN_SD2_DATA2,
	PAD_CTL_DRV_MAX \| PAD_CTL_22K_PU \|
	PAD_CTL_SRE_FAST);
	mxc_iomux_set_pad(MX51_PIN_SD2_DATA3,
	PAD_CTL_DRV_MAX \| PAD_CTL_22K_PU \|
	PAD_CTL_SRE_FAST);
	mxc_request_iomux(MX51_PIN_SD2_CMD,
	IOMUX_CONFIG_ALT0 \| IOMUX_CONFIG_SION);
	mxc_request_iomux(MX51_PIN_GPIO1_6,
	IOMUX_CONFIG_ALT0 \| IOMUX_CONFIG_SION);
	mxc_iomux_set_pad(MX51_PIN_GPIO1_6,
	PAD_CTL_HYS_ENABLE);
	mxc_request_iomux(MX51_PIN_GPIO1_5,
	IOMUX_CONFIG_ALT0 \| IOMUX_CONFIG_SION);
	mxc_iomux_set_pad(MX51_PIN_GPIO1_5,
	PAD_CTL_HYS_ENABLE);
	break;
	default:
	printf("Warning: you configured more ESDHC controller"
	"(%d) as supported by the board(2)\n",
	CONFIG_SYS_FSL_ESDHC_NUM);
	return status;
	}
	status \|= fsl_esdhc_initialize(bis, &esdhc_cfg[index]);
	}
	return status;
	}
	#endif

	int board_early_init_f(void)
	{
	setup_iomux_uart();
	setup_iomux_fec();

	return 0;
	}

	int board_init(void)
	{
	system_rev = get_cpu_rev();

	gd->bd->bi_arch_number = MACH_TYPE_MX51_BABBAGE;
	/* address of boot parameters */
	gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;

	return 0;
	}

	#ifdef BOARD_LATE_INIT
	int board_late_init(void)
	{
	#ifdef CONFIG_MXC_SPI
	setup_iomux_spi();
	power_init();
	#endif
	return 0;
	}
	#endif

	int checkboard(void)
	{
	puts("Board: MX51EVK ");

	switch (system_rev & 0xff) {
	case CHIP_REV_3_0:
	puts("3.0 [");
	break;
	case CHIP_REV_2_5:
	puts("2.5 [");
	break;
	case CHIP_REV_2_0:
	puts("2.0 [");
	break;
	case CHIP_REV_1_1:
	puts("1.1 [");
	break;
	case CHIP_REV_1_0:
	default:
	puts("1.0 [");
	break;
	}

	switch (__raw_readl(SRC_BASE_ADDR + 0x8)) {
	case 0x0001:
	puts("POR");
	break;
	case 0x0009:
	puts("RST");
	break;
	case 0x0010:
	case 0x0011:
	puts("WDOG");
	break;
	default:
	puts("unknown");
	}
	puts("]\n");
	return 0;
	}