| /* |
| * Bluestone board support |
| * |
| * Copyright (c) 2010, Applied Micro Circuits Corporation |
| * Author: Tirumala R Marri <tmarri@apm.com> |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| #include <common.h> |
| #include <asm/apm821xx.h> |
| #include <libfdt.h> |
| #include <fdt_support.h> |
| #include <i2c.h> |
| #include <asm/processor.h> |
| #include <asm/io.h> |
| #include <asm/mmu.h> |
| #include <asm/ppc4xx-gpio.h> |
| |
| int board_early_init_f(void) |
| { |
| /* |
| * Setup the interrupt controller polarities, triggers, etc. |
| */ |
| mtdcr(UIC0SR, 0xffffffff); /* clear all */ |
| mtdcr(UIC0ER, 0x00000000); /* disable all */ |
| mtdcr(UIC0CR, 0x00000005); /* ATI & UIC1 crit are critical */ |
| mtdcr(UIC0PR, 0xffffffff); /* per ref-board manual */ |
| mtdcr(UIC0TR, 0x00000000); /* per ref-board manual */ |
| mtdcr(UIC0VR, 0x00000000); /* int31 highest, base=0x000 */ |
| mtdcr(UIC0SR, 0xffffffff); /* clear all */ |
| |
| mtdcr(UIC1SR, 0xffffffff); /* clear all */ |
| mtdcr(UIC1ER, 0x00000000); /* disable all */ |
| mtdcr(UIC1CR, 0x00000000); /* all non-critical */ |
| mtdcr(UIC1PR, 0xffffffff); /* per ref-board manual */ |
| mtdcr(UIC1TR, 0x00000000); /* per ref-board manual */ |
| mtdcr(UIC1VR, 0x00000000); /* int31 highest, base=0x000 */ |
| mtdcr(UIC1SR, 0xffffffff); /* clear all */ |
| |
| mtdcr(UIC2SR, 0xffffffff); /* clear all */ |
| mtdcr(UIC2ER, 0x00000000); /* disable all */ |
| mtdcr(UIC2CR, 0x00000000); /* all non-critical */ |
| mtdcr(UIC2PR, 0xffffffff); /* per ref-board manual */ |
| mtdcr(UIC2TR, 0x00000000); /* per ref-board manual */ |
| mtdcr(UIC2VR, 0x00000000); /* int31 highest, base=0x000 */ |
| mtdcr(UIC2SR, 0xffffffff); /* clear all */ |
| |
| mtdcr(UIC3SR, 0xffffffff); /* clear all */ |
| mtdcr(UIC3ER, 0x00000000); /* disable all */ |
| mtdcr(UIC3CR, 0x00000000); /* all non-critical */ |
| mtdcr(UIC3PR, 0xffffffff); /* per ref-board manual */ |
| mtdcr(UIC3TR, 0x00000000); /* per ref-board manual */ |
| mtdcr(UIC3VR, 0x00000000); /* int31 highest, base=0x000 */ |
| mtdcr(UIC3SR, 0xffffffff); /* clear all */ |
| |
| /* |
| * Configure PFC (Pin Function Control) registers |
| * UART0: 2 pins |
| */ |
| mtsdr(SDR0_PFC1, 0x0000000); |
| |
| return 0; |
| } |
| |
| int checkboard(void) |
| { |
| char *s = getenv("serial#"); |
| |
| puts("Board: Bluestone Evaluation Board"); |
| |
| if (s != NULL) { |
| puts(", serial# "); |
| puts(s); |
| } |
| putc('\n'); |
| |
| return 0; |
| } |
| |
| int misc_init_r(void) |
| { |
| u32 sdr0_srst1 = 0; |
| |
| /* Setup PLB4-AHB bridge based on the system address map */ |
| mtdcr(AHB_TOP, 0x8000004B); |
| mtdcr(AHB_BOT, 0x8000004B); |
| |
| /* |
| * The AHB Bridge core is held in reset after power-on or reset |
| * so enable it now |
| */ |
| mfsdr(SDR0_SRST1, sdr0_srst1); |
| sdr0_srst1 &= ~SDR0_SRST1_AHB; |
| mtsdr(SDR0_SRST1, sdr0_srst1); |
| |
| return 0; |
| } |