| /* |
| * (C) Copyright 2006-2008 |
| * Texas Instruments, <www.ti.com> |
| * Syed Mohammed Khasim <x0khasim@ti.com> |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| #ifndef _MUX_H_ |
| #define _MUX_H_ |
| |
| /* |
| * IEN - Input Enable |
| * IDIS - Input Disable |
| * PTD - Pull type Down |
| * PTU - Pull type Up |
| * DIS - Pull type selection is inactive |
| * EN - Pull type selection is active |
| * SB_LOW - Standby mode configuration: Output low-level |
| * SB_HI - Standby mode configuration: Output high-level |
| * SB_HIZ - Standby mode configuration: Output hi-impedence |
| * SB_PD - Standby mode pull-down enabled |
| * SB_PU - Standby mode pull-up enabled |
| * WKEN - Wakeup input enabled |
| * M0 - Mode 0 |
| */ |
| |
| #define IEN (1 << 8) |
| |
| #define IDIS (0 << 8) |
| #define PTU (1 << 4) |
| #define PTD (0 << 4) |
| #define EN (1 << 3) |
| #define DIS (0 << 3) |
| |
| #define SB_LOW (1 << 9) |
| #define SB_HI (5 << 9) |
| #define SB_HIZ (2 << 9) |
| #define SB_PD (1 << 12) |
| #define SB_PU (3 << 12) |
| #define WKEN (1 << 14) |
| |
| #define M0 0 |
| #define M1 1 |
| #define M2 2 |
| #define M3 3 |
| #define M4 4 |
| #define M5 5 |
| #define M6 6 |
| #define M7 7 |
| |
| /* |
| * To get the actual address the offset has to be added |
| * to OMAP34XX_CTRL_BASE |
| */ |
| |
| /*SDRC*/ |
| #define CONTROL_PADCONF_SDRC_D0 0x0030 |
| #define CONTROL_PADCONF_SDRC_D1 0x0032 |
| #define CONTROL_PADCONF_SDRC_D2 0x0034 |
| #define CONTROL_PADCONF_SDRC_D3 0x0036 |
| #define CONTROL_PADCONF_SDRC_D4 0x0038 |
| #define CONTROL_PADCONF_SDRC_D5 0x003A |
| #define CONTROL_PADCONF_SDRC_D6 0x003C |
| #define CONTROL_PADCONF_SDRC_D7 0x003E |
| #define CONTROL_PADCONF_SDRC_D8 0x0040 |
| #define CONTROL_PADCONF_SDRC_D9 0x0042 |
| #define CONTROL_PADCONF_SDRC_D10 0x0044 |
| #define CONTROL_PADCONF_SDRC_D11 0x0046 |
| #define CONTROL_PADCONF_SDRC_D12 0x0048 |
| #define CONTROL_PADCONF_SDRC_D13 0x004A |
| #define CONTROL_PADCONF_SDRC_D14 0x004C |
| #define CONTROL_PADCONF_SDRC_D15 0x004E |
| #define CONTROL_PADCONF_SDRC_D16 0x0050 |
| #define CONTROL_PADCONF_SDRC_D17 0x0052 |
| #define CONTROL_PADCONF_SDRC_D18 0x0054 |
| #define CONTROL_PADCONF_SDRC_D19 0x0056 |
| #define CONTROL_PADCONF_SDRC_D20 0x0058 |
| #define CONTROL_PADCONF_SDRC_D21 0x005A |
| #define CONTROL_PADCONF_SDRC_D22 0x005C |
| #define CONTROL_PADCONF_SDRC_D23 0x005E |
| #define CONTROL_PADCONF_SDRC_D24 0x0060 |
| #define CONTROL_PADCONF_SDRC_D25 0x0062 |
| #define CONTROL_PADCONF_SDRC_D26 0x0064 |
| #define CONTROL_PADCONF_SDRC_D27 0x0066 |
| #define CONTROL_PADCONF_SDRC_D28 0x0068 |
| #define CONTROL_PADCONF_SDRC_D29 0x006A |
| #define CONTROL_PADCONF_SDRC_D30 0x006C |
| #define CONTROL_PADCONF_SDRC_D31 0x006E |
| #define CONTROL_PADCONF_SDRC_CLK 0x0070 |
| #define CONTROL_PADCONF_SDRC_DQS0 0x0072 |
| #define CONTROL_PADCONF_SDRC_DQS1 0x0074 |
| #define CONTROL_PADCONF_SDRC_DQS2 0x0076 |
| #define CONTROL_PADCONF_SDRC_DQS3 0x0078 |
| #define CONTROL_PADCONF_SDRC_BA0 0x05A0 |
| #define CONTROL_PADCONF_SDRC_BA1 0x05A2 |
| #define CONTROL_PADCONF_SDRC_A0 0x05A4 |
| #define CONTROL_PADCONF_SDRC_A1 0x05A6 |
| #define CONTROL_PADCONF_SDRC_A2 0x05A8 |
| #define CONTROL_PADCONF_SDRC_A3 0x05AA |
| #define CONTROL_PADCONF_SDRC_A4 0x05AC |
| #define CONTROL_PADCONF_SDRC_A5 0x05AE |
| #define CONTROL_PADCONF_SDRC_A6 0x05B0 |
| #define CONTROL_PADCONF_SDRC_A7 0x05B2 |
| #define CONTROL_PADCONF_SDRC_A8 0x05B4 |
| #define CONTROL_PADCONF_SDRC_A9 0x05B6 |
| #define CONTROL_PADCONF_SDRC_A10 0x05B8 |
| #define CONTROL_PADCONF_SDRC_A11 0x05BA |
| #define CONTROL_PADCONF_SDRC_A12 0x05BC |
| #define CONTROL_PADCONF_SDRC_A13 0x05BE |
| #define CONTROL_PADCONF_SDRC_A14 0x05C0 |
| #define CONTROL_PADCONF_SDRC_NCS0 0x05C2 |
| #define CONTROL_PADCONF_SDRC_NCS1 0x05C4 |
| #define CONTROL_PADCONF_SDRC_NCLK 0x05C6 |
| #define CONTROL_PADCONF_SDRC_NRAS 0x05C8 |
| #define CONTROL_PADCONF_SDRC_NCAS 0x05CA |
| #define CONTROL_PADCONF_SDRC_NWE 0x05CC |
| #define CONTROL_PADCONF_SDRC_DM0 0x05CE |
| #define CONTROL_PADCONF_SDRC_DM1 0x05D0 |
| #define CONTROL_PADCONF_SDRC_DM2 0x05D2 |
| #define CONTROL_PADCONF_SDRC_DM3 0x05D4 |
| /*GPMC*/ |
| #define CONTROL_PADCONF_GPMC_A1 0x007A |
| #define CONTROL_PADCONF_GPMC_A2 0x007C |
| #define CONTROL_PADCONF_GPMC_A3 0x007E |
| #define CONTROL_PADCONF_GPMC_A4 0x0080 |
| #define CONTROL_PADCONF_GPMC_A5 0x0082 |
| #define CONTROL_PADCONF_GPMC_A6 0x0084 |
| #define CONTROL_PADCONF_GPMC_A7 0x0086 |
| #define CONTROL_PADCONF_GPMC_A8 0x0088 |
| #define CONTROL_PADCONF_GPMC_A9 0x008A |
| #define CONTROL_PADCONF_GPMC_A10 0x008C |
| #define CONTROL_PADCONF_GPMC_A11 0x0264 |
| #define CONTROL_PADCONF_GPMC_D0 0x008E |
| #define CONTROL_PADCONF_GPMC_D1 0x0090 |
| #define CONTROL_PADCONF_GPMC_D2 0x0092 |
| #define CONTROL_PADCONF_GPMC_D3 0x0094 |
| #define CONTROL_PADCONF_GPMC_D4 0x0096 |
| #define CONTROL_PADCONF_GPMC_D5 0x0098 |
| #define CONTROL_PADCONF_GPMC_D6 0x009A |
| #define CONTROL_PADCONF_GPMC_D7 0x009C |
| #define CONTROL_PADCONF_GPMC_D8 0x009E |
| #define CONTROL_PADCONF_GPMC_D9 0x00A0 |
| #define CONTROL_PADCONF_GPMC_D10 0x00A2 |
| #define CONTROL_PADCONF_GPMC_D11 0x00A4 |
| #define CONTROL_PADCONF_GPMC_D12 0x00A6 |
| #define CONTROL_PADCONF_GPMC_D13 0x00A8 |
| #define CONTROL_PADCONF_GPMC_D14 0x00AA |
| #define CONTROL_PADCONF_GPMC_D15 0x00AC |
| #define CONTROL_PADCONF_GPMC_NCS0 0x00AE |
| #define CONTROL_PADCONF_GPMC_NCS1 0x00B0 |
| #define CONTROL_PADCONF_GPMC_NCS2 0x00B2 |
| #define CONTROL_PADCONF_GPMC_NCS3 0x00B4 |
| #define CONTROL_PADCONF_GPMC_NCS4 0x00B6 |
| #define CONTROL_PADCONF_GPMC_NCS5 0x00B8 |
| #define CONTROL_PADCONF_GPMC_NCS6 0x00BA |
| #define CONTROL_PADCONF_GPMC_NCS7 0x00BC |
| #define CONTROL_PADCONF_GPMC_CLK 0x00BE |
| #define CONTROL_PADCONF_GPMC_NADV_ALE 0x00C0 |
| #define CONTROL_PADCONF_GPMC_NOE 0x00C2 |
| #define CONTROL_PADCONF_GPMC_NWE 0x00C4 |
| #define CONTROL_PADCONF_GPMC_NBE0_CLE 0x00C6 |
| #define CONTROL_PADCONF_GPMC_NBE1 0x00C8 |
| #define CONTROL_PADCONF_GPMC_NWP 0x00CA |
| #define CONTROL_PADCONF_GPMC_WAIT0 0x00CC |
| #define CONTROL_PADCONF_GPMC_WAIT1 0x00CE |
| #define CONTROL_PADCONF_GPMC_WAIT2 0x00D0 |
| #define CONTROL_PADCONF_GPMC_WAIT3 0x00D2 |
| /*DSS*/ |
| #define CONTROL_PADCONF_DSS_PCLK 0x00D4 |
| #define CONTROL_PADCONF_DSS_HSYNC 0x00D6 |
| #define CONTROL_PADCONF_DSS_VSYNC 0x00D8 |
| #define CONTROL_PADCONF_DSS_ACBIAS 0x00DA |
| #define CONTROL_PADCONF_DSS_DATA0 0x00DC |
| #define CONTROL_PADCONF_DSS_DATA1 0x00DE |
| #define CONTROL_PADCONF_DSS_DATA2 0x00E0 |
| #define CONTROL_PADCONF_DSS_DATA3 0x00E2 |
| #define CONTROL_PADCONF_DSS_DATA4 0x00E4 |
| #define CONTROL_PADCONF_DSS_DATA5 0x00E6 |
| #define CONTROL_PADCONF_DSS_DATA6 0x00E8 |
| #define CONTROL_PADCONF_DSS_DATA7 0x00EA |
| #define CONTROL_PADCONF_DSS_DATA8 0x00EC |
| #define CONTROL_PADCONF_DSS_DATA9 0x00EE |
| #define CONTROL_PADCONF_DSS_DATA10 0x00F0 |
| #define CONTROL_PADCONF_DSS_DATA11 0x00F2 |
| #define CONTROL_PADCONF_DSS_DATA12 0x00F4 |
| #define CONTROL_PADCONF_DSS_DATA13 0x00F6 |
| #define CONTROL_PADCONF_DSS_DATA14 0x00F8 |
| #define CONTROL_PADCONF_DSS_DATA15 0x00FA |
| #define CONTROL_PADCONF_DSS_DATA16 0x00FC |
| #define CONTROL_PADCONF_DSS_DATA17 0x00FE |
| #define CONTROL_PADCONF_DSS_DATA18 0x0100 |
| #define CONTROL_PADCONF_DSS_DATA19 0x0102 |
| #define CONTROL_PADCONF_DSS_DATA20 0x0104 |
| #define CONTROL_PADCONF_DSS_DATA21 0x0106 |
| #define CONTROL_PADCONF_DSS_DATA22 0x0108 |
| #define CONTROL_PADCONF_DSS_DATA23 0x010A |
| /*CAMERA*/ |
| #define CONTROL_PADCONF_CAM_HS 0x010C |
| #define CONTROL_PADCONF_CAM_VS 0x010E |
| #define CONTROL_PADCONF_CAM_XCLKA 0x0110 |
| #define CONTROL_PADCONF_CAM_PCLK 0x0112 |
| #define CONTROL_PADCONF_CAM_FLD 0x0114 |
| #define CONTROL_PADCONF_CAM_D0 0x0116 |
| #define CONTROL_PADCONF_CAM_D1 0x0118 |
| #define CONTROL_PADCONF_CAM_D2 0x011A |
| #define CONTROL_PADCONF_CAM_D3 0x011C |
| #define CONTROL_PADCONF_CAM_D4 0x011E |
| #define CONTROL_PADCONF_CAM_D5 0x0120 |
| #define CONTROL_PADCONF_CAM_D6 0x0122 |
| #define CONTROL_PADCONF_CAM_D7 0x0124 |
| #define CONTROL_PADCONF_CAM_D8 0x0126 |
| #define CONTROL_PADCONF_CAM_D9 0x0128 |
| #define CONTROL_PADCONF_CAM_D10 0x012A |
| #define CONTROL_PADCONF_CAM_D11 0x012C |
| #define CONTROL_PADCONF_CAM_XCLKB 0x012E |
| #define CONTROL_PADCONF_CAM_WEN 0x0130 |
| #define CONTROL_PADCONF_CAM_STROBE 0x0132 |
| #define CONTROL_PADCONF_CSI2_DX0 0x0134 |
| #define CONTROL_PADCONF_CSI2_DY0 0x0136 |
| #define CONTROL_PADCONF_CSI2_DX1 0x0138 |
| #define CONTROL_PADCONF_CSI2_DY1 0x013A |
| /*Audio Interface */ |
| #define CONTROL_PADCONF_MCBSP2_FSX 0x013C |
| #define CONTROL_PADCONF_MCBSP2_CLKX 0x013E |
| #define CONTROL_PADCONF_MCBSP2_DR 0x0140 |
| #define CONTROL_PADCONF_MCBSP2_DX 0x0142 |
| #define CONTROL_PADCONF_MMC1_CLK 0x0144 |
| #define CONTROL_PADCONF_MMC1_CMD 0x0146 |
| #define CONTROL_PADCONF_MMC1_DAT0 0x0148 |
| #define CONTROL_PADCONF_MMC1_DAT1 0x014A |
| #define CONTROL_PADCONF_MMC1_DAT2 0x014C |
| #define CONTROL_PADCONF_MMC1_DAT3 0x014E |
| #define CONTROL_PADCONF_MMC1_DAT4 0x0150 |
| #define CONTROL_PADCONF_MMC1_DAT5 0x0152 |
| #define CONTROL_PADCONF_MMC1_DAT6 0x0154 |
| #define CONTROL_PADCONF_MMC1_DAT7 0x0156 |
| /*Wireless LAN */ |
| #define CONTROL_PADCONF_MMC2_CLK 0x0158 |
| #define CONTROL_PADCONF_MMC2_CMD 0x015A |
| #define CONTROL_PADCONF_MMC2_DAT0 0x015C |
| #define CONTROL_PADCONF_MMC2_DAT1 0x015E |
| #define CONTROL_PADCONF_MMC2_DAT2 0x0160 |
| #define CONTROL_PADCONF_MMC2_DAT3 0x0162 |
| #define CONTROL_PADCONF_MMC2_DAT4 0x0164 |
| #define CONTROL_PADCONF_MMC2_DAT5 0x0166 |
| #define CONTROL_PADCONF_MMC2_DAT6 0x0168 |
| #define CONTROL_PADCONF_MMC2_DAT7 0x016A |
| /*Bluetooth*/ |
| #define CONTROL_PADCONF_MCBSP3_DX 0x016C |
| #define CONTROL_PADCONF_MCBSP3_DR 0x016E |
| #define CONTROL_PADCONF_MCBSP3_CLKX 0x0170 |
| #define CONTROL_PADCONF_MCBSP3_FSX 0x0172 |
| #define CONTROL_PADCONF_UART2_CTS 0x0174 |
| #define CONTROL_PADCONF_UART2_RTS 0x0176 |
| #define CONTROL_PADCONF_UART2_TX 0x0178 |
| #define CONTROL_PADCONF_UART2_RX 0x017A |
| /*Modem Interface */ |
| #define CONTROL_PADCONF_UART1_TX 0x017C |
| #define CONTROL_PADCONF_UART1_RTS 0x017E |
| #define CONTROL_PADCONF_UART1_CTS 0x0180 |
| #define CONTROL_PADCONF_UART1_RX 0x0182 |
| #define CONTROL_PADCONF_MCBSP4_CLKX 0x0184 |
| #define CONTROL_PADCONF_MCBSP4_DR 0x0186 |
| #define CONTROL_PADCONF_MCBSP4_DX 0x0188 |
| #define CONTROL_PADCONF_MCBSP4_FSX 0x018A |
| #define CONTROL_PADCONF_MCBSP1_CLKR 0x018C |
| #define CONTROL_PADCONF_MCBSP1_FSR 0x018E |
| #define CONTROL_PADCONF_MCBSP1_DX 0x0190 |
| #define CONTROL_PADCONF_MCBSP1_DR 0x0192 |
| #define CONTROL_PADCONF_MCBSP_CLKS 0x0194 |
| #define CONTROL_PADCONF_MCBSP1_FSX 0x0196 |
| #define CONTROL_PADCONF_MCBSP1_CLKX 0x0198 |
| /*Serial Interface*/ |
| #define CONTROL_PADCONF_UART3_CTS_RCTX 0x019A |
| #define CONTROL_PADCONF_UART3_RTS_SD 0x019C |
| #define CONTROL_PADCONF_UART3_RX_IRRX 0x019E |
| #define CONTROL_PADCONF_UART3_TX_IRTX 0x01A0 |
| #define CONTROL_PADCONF_HSUSB0_CLK 0x01A2 |
| #define CONTROL_PADCONF_HSUSB0_STP 0x01A4 |
| #define CONTROL_PADCONF_HSUSB0_DIR 0x01A6 |
| #define CONTROL_PADCONF_HSUSB0_NXT 0x01A8 |
| #define CONTROL_PADCONF_HSUSB0_DATA0 0x01AA |
| #define CONTROL_PADCONF_HSUSB0_DATA1 0x01AC |
| #define CONTROL_PADCONF_HSUSB0_DATA2 0x01AE |
| #define CONTROL_PADCONF_HSUSB0_DATA3 0x01B0 |
| #define CONTROL_PADCONF_HSUSB0_DATA4 0x01B2 |
| #define CONTROL_PADCONF_HSUSB0_DATA5 0x01B4 |
| #define CONTROL_PADCONF_HSUSB0_DATA6 0x01B6 |
| #define CONTROL_PADCONF_HSUSB0_DATA7 0x01B8 |
| #define CONTROL_PADCONF_I2C1_SCL 0x01BA |
| #define CONTROL_PADCONF_I2C1_SDA 0x01BC |
| #define CONTROL_PADCONF_I2C2_SCL 0x01BE |
| #define CONTROL_PADCONF_I2C2_SDA 0x01C0 |
| #define CONTROL_PADCONF_I2C3_SCL 0x01C2 |
| #define CONTROL_PADCONF_I2C3_SDA 0x01C4 |
| #define CONTROL_PADCONF_I2C4_SCL 0x0A00 |
| #define CONTROL_PADCONF_I2C4_SDA 0x0A02 |
| #define CONTROL_PADCONF_HDQ_SIO 0x01C6 |
| #define CONTROL_PADCONF_MCSPI1_CLK 0x01C8 |
| #define CONTROL_PADCONF_MCSPI1_SIMO 0x01CA |
| #define CONTROL_PADCONF_MCSPI1_SOMI 0x01CC |
| #define CONTROL_PADCONF_MCSPI1_CS0 0x01CE |
| #define CONTROL_PADCONF_MCSPI1_CS1 0x01D0 |
| #define CONTROL_PADCONF_MCSPI1_CS2 0x01D2 |
| #define CONTROL_PADCONF_MCSPI1_CS3 0x01D4 |
| #define CONTROL_PADCONF_MCSPI2_CLK 0x01D6 |
| #define CONTROL_PADCONF_MCSPI2_SIMO 0x01D8 |
| #define CONTROL_PADCONF_MCSPI2_SOMI 0x01DA |
| #define CONTROL_PADCONF_MCSPI2_CS0 0x01DC |
| #define CONTROL_PADCONF_MCSPI2_CS1 0x01DE |
| /*Control and debug */ |
| #define CONTROL_PADCONF_SYS_32K 0x0A04 |
| #define CONTROL_PADCONF_SYS_CLKREQ 0x0A06 |
| #define CONTROL_PADCONF_SYS_NIRQ 0x01E0 |
| #define CONTROL_PADCONF_SYS_BOOT0 0x0A0A |
| #define CONTROL_PADCONF_SYS_BOOT1 0x0A0C |
| #define CONTROL_PADCONF_SYS_BOOT2 0x0A0E |
| #define CONTROL_PADCONF_SYS_BOOT3 0x0A10 |
| #define CONTROL_PADCONF_SYS_BOOT4 0x0A12 |
| #define CONTROL_PADCONF_SYS_BOOT5 0x0A14 |
| #define CONTROL_PADCONF_SYS_BOOT6 0x0A16 |
| #define CONTROL_PADCONF_SYS_OFF_MODE 0x0A18 |
| #define CONTROL_PADCONF_SYS_CLKOUT1 0x0A1A |
| #define CONTROL_PADCONF_SYS_CLKOUT2 0x01E2 |
| #define CONTROL_PADCONF_JTAG_NTRST 0x0A1C |
| #define CONTROL_PADCONF_JTAG_TCK 0x0A1E |
| #define CONTROL_PADCONF_JTAG_TMS 0x0A20 |
| #define CONTROL_PADCONF_JTAG_TDI 0x0A22 |
| #define CONTROL_PADCONF_JTAG_EMU0 0x0A24 |
| #define CONTROL_PADCONF_JTAG_EMU1 0x0A26 |
| #define CONTROL_PADCONF_ETK_CLK 0x0A28 |
| #define CONTROL_PADCONF_ETK_CTL 0x0A2A |
| #define CONTROL_PADCONF_ETK_D0 0x0A2C |
| #define CONTROL_PADCONF_ETK_D1 0x0A2E |
| #define CONTROL_PADCONF_ETK_D2 0x0A30 |
| #define CONTROL_PADCONF_ETK_D3 0x0A32 |
| #define CONTROL_PADCONF_ETK_D4 0x0A34 |
| #define CONTROL_PADCONF_ETK_D5 0x0A36 |
| #define CONTROL_PADCONF_ETK_D6 0x0A38 |
| #define CONTROL_PADCONF_ETK_D7 0x0A3A |
| #define CONTROL_PADCONF_ETK_D8 0x0A3C |
| #define CONTROL_PADCONF_ETK_D9 0x0A3E |
| #define CONTROL_PADCONF_ETK_D10 0x0A40 |
| #define CONTROL_PADCONF_ETK_D11 0x0A42 |
| #define CONTROL_PADCONF_ETK_D12 0x0A44 |
| #define CONTROL_PADCONF_ETK_D13 0x0A46 |
| #define CONTROL_PADCONF_ETK_D14 0x0A48 |
| #define CONTROL_PADCONF_ETK_D15 0x0A4A |
| #define CONTROL_PADCONF_ETK_CLK_ES2 0x05D8 |
| #define CONTROL_PADCONF_ETK_CTL_ES2 0x05DA |
| #define CONTROL_PADCONF_ETK_D0_ES2 0x05DC |
| #define CONTROL_PADCONF_ETK_D1_ES2 0x05DE |
| #define CONTROL_PADCONF_ETK_D2_ES2 0x05E0 |
| #define CONTROL_PADCONF_ETK_D3_ES2 0x05E2 |
| #define CONTROL_PADCONF_ETK_D4_ES2 0x05E4 |
| #define CONTROL_PADCONF_ETK_D5_ES2 0x05E6 |
| #define CONTROL_PADCONF_ETK_D6_ES2 0x05E8 |
| #define CONTROL_PADCONF_ETK_D7_ES2 0x05EA |
| #define CONTROL_PADCONF_ETK_D8_ES2 0x05EC |
| #define CONTROL_PADCONF_ETK_D9_ES2 0x05EE |
| #define CONTROL_PADCONF_ETK_D10_ES2 0x05F0 |
| #define CONTROL_PADCONF_ETK_D11_ES2 0x05F2 |
| #define CONTROL_PADCONF_ETK_D12_ES2 0x05F4 |
| #define CONTROL_PADCONF_ETK_D13_ES2 0x05F6 |
| #define CONTROL_PADCONF_ETK_D14_ES2 0x05F8 |
| #define CONTROL_PADCONF_ETK_D15_ES2 0x05FA |
| #define CONTROL_PADCONF_JTAG_RTCK 0x0A4E |
| #define CONTROL_PADCONF_JTAG_TDO 0x0A50 |
| /*Die to Die */ |
| #define CONTROL_PADCONF_D2D_MCAD0 0x01E4 |
| #define CONTROL_PADCONF_D2D_MCAD1 0x01E6 |
| #define CONTROL_PADCONF_D2D_MCAD2 0x01E8 |
| #define CONTROL_PADCONF_D2D_MCAD3 0x01EA |
| #define CONTROL_PADCONF_D2D_MCAD4 0x01EC |
| #define CONTROL_PADCONF_D2D_MCAD5 0x01EE |
| #define CONTROL_PADCONF_D2D_MCAD6 0x01F0 |
| #define CONTROL_PADCONF_D2D_MCAD7 0x01F2 |
| #define CONTROL_PADCONF_D2D_MCAD8 0x01F4 |
| #define CONTROL_PADCONF_D2D_MCAD9 0x01F6 |
| #define CONTROL_PADCONF_D2D_MCAD10 0x01F8 |
| #define CONTROL_PADCONF_D2D_MCAD11 0x01FA |
| #define CONTROL_PADCONF_D2D_MCAD12 0x01FC |
| #define CONTROL_PADCONF_D2D_MCAD13 0x01FE |
| #define CONTROL_PADCONF_D2D_MCAD14 0x0200 |
| #define CONTROL_PADCONF_D2D_MCAD15 0x0202 |
| #define CONTROL_PADCONF_D2D_MCAD16 0x0204 |
| #define CONTROL_PADCONF_D2D_MCAD17 0x0206 |
| #define CONTROL_PADCONF_D2D_MCAD18 0x0208 |
| #define CONTROL_PADCONF_D2D_MCAD19 0x020A |
| #define CONTROL_PADCONF_D2D_MCAD20 0x020C |
| #define CONTROL_PADCONF_D2D_MCAD21 0x020E |
| #define CONTROL_PADCONF_D2D_MCAD22 0x0210 |
| #define CONTROL_PADCONF_D2D_MCAD23 0x0212 |
| #define CONTROL_PADCONF_D2D_MCAD24 0x0214 |
| #define CONTROL_PADCONF_D2D_MCAD25 0x0216 |
| #define CONTROL_PADCONF_D2D_MCAD26 0x0218 |
| #define CONTROL_PADCONF_D2D_MCAD27 0x021A |
| #define CONTROL_PADCONF_D2D_MCAD28 0x021C |
| #define CONTROL_PADCONF_D2D_MCAD29 0x021E |
| #define CONTROL_PADCONF_D2D_MCAD30 0x0220 |
| #define CONTROL_PADCONF_D2D_MCAD31 0x0222 |
| #define CONTROL_PADCONF_D2D_MCAD32 0x0224 |
| #define CONTROL_PADCONF_D2D_MCAD33 0x0226 |
| #define CONTROL_PADCONF_D2D_MCAD34 0x0228 |
| #define CONTROL_PADCONF_D2D_MCAD35 0x022A |
| #define CONTROL_PADCONF_D2D_MCAD36 0x022C |
| #define CONTROL_PADCONF_D2D_CLK26MI 0x022E |
| #define CONTROL_PADCONF_D2D_NRESPWRON 0x0230 |
| #define CONTROL_PADCONF_D2D_NRESWARM 0x0232 |
| #define CONTROL_PADCONF_D2D_ARM9NIRQ 0x0234 |
| #define CONTROL_PADCONF_D2D_UMA2P6FIQ 0x0236 |
| #define CONTROL_PADCONF_D2D_SPINT 0x0238 |
| #define CONTROL_PADCONF_D2D_FRINT 0x023A |
| #define CONTROL_PADCONF_D2D_DMAREQ0 0x023C |
| #define CONTROL_PADCONF_D2D_DMAREQ1 0x023E |
| #define CONTROL_PADCONF_D2D_DMAREQ2 0x0240 |
| #define CONTROL_PADCONF_D2D_DMAREQ3 0x0242 |
| #define CONTROL_PADCONF_D2D_N3GTRST 0x0244 |
| #define CONTROL_PADCONF_D2D_N3GTDI 0x0246 |
| #define CONTROL_PADCONF_D2D_N3GTDO 0x0248 |
| #define CONTROL_PADCONF_D2D_N3GTMS 0x024A |
| #define CONTROL_PADCONF_D2D_N3GTCK 0x024C |
| #define CONTROL_PADCONF_D2D_N3GRTCK 0x024E |
| #define CONTROL_PADCONF_D2D_MSTDBY 0x0250 |
| #define CONTROL_PADCONF_D2D_SWAKEUP 0x0A4C |
| #define CONTROL_PADCONF_D2D_IDLEREQ 0x0252 |
| #define CONTROL_PADCONF_D2D_IDLEACK 0x0254 |
| #define CONTROL_PADCONF_D2D_MWRITE 0x0256 |
| #define CONTROL_PADCONF_D2D_SWRITE 0x0258 |
| #define CONTROL_PADCONF_D2D_MREAD 0x025A |
| #define CONTROL_PADCONF_D2D_SREAD 0x025C |
| #define CONTROL_PADCONF_D2D_MBUSFLAG 0x025E |
| #define CONTROL_PADCONF_D2D_SBUSFLAG 0x0260 |
| #define CONTROL_PADCONF_SDRC_CKE0 0x0262 |
| #define CONTROL_PADCONF_SDRC_CKE1 0x0264 |
| |
| /* AM3517 specific mux configuration */ |
| #define CONTROL_PADCONF_SYS_NRESWARM 0x0A08 |
| /* CCDC */ |
| #define CONTROL_PADCONF_CCDC_PCLK 0x01E4 |
| #define CONTROL_PADCONF_CCDC_FIELD 0x01E6 |
| #define CONTROL_PADCONF_CCDC_HD 0x01E8 |
| #define CONTROL_PADCONF_CCDC_VD 0x01EA |
| #define CONTROL_PADCONF_CCDC_WEN 0x01EC |
| #define CONTROL_PADCONF_CCDC_DATA0 0x01EE |
| #define CONTROL_PADCONF_CCDC_DATA1 0x01F0 |
| #define CONTROL_PADCONF_CCDC_DATA2 0x01F2 |
| #define CONTROL_PADCONF_CCDC_DATA3 0x01F4 |
| #define CONTROL_PADCONF_CCDC_DATA4 0x01F6 |
| #define CONTROL_PADCONF_CCDC_DATA5 0x01F8 |
| #define CONTROL_PADCONF_CCDC_DATA6 0x01FA |
| #define CONTROL_PADCONF_CCDC_DATA7 0x01FC |
| /* RMII */ |
| #define CONTROL_PADCONF_RMII_MDIO_DATA 0x01FE |
| #define CONTROL_PADCONF_RMII_MDIO_CLK 0x0200 |
| #define CONTROL_PADCONF_RMII_RXD0 0x0202 |
| #define CONTROL_PADCONF_RMII_RXD1 0x0204 |
| #define CONTROL_PADCONF_RMII_CRS_DV 0x0206 |
| #define CONTROL_PADCONF_RMII_RXER 0x0208 |
| #define CONTROL_PADCONF_RMII_TXD0 0x020A |
| #define CONTROL_PADCONF_RMII_TXD1 0x020C |
| #define CONTROL_PADCONF_RMII_TXEN 0x020E |
| #define CONTROL_PADCONF_RMII_50MHZ_CLK 0x0210 |
| #define CONTROL_PADCONF_USB0_DRVBUS 0x0212 |
| /* CAN */ |
| #define CONTROL_PADCONF_HECC1_TXD 0x0214 |
| #define CONTROL_PADCONF_HECC1_RXD 0x0216 |
| |
| #define CONTROL_PADCONF_SYS_BOOT7 0x0218 |
| #define CONTROL_PADCONF_SDRC_DQS0N 0x021A |
| #define CONTROL_PADCONF_SDRC_DQS1N 0x021C |
| #define CONTROL_PADCONF_SDRC_DQS2N 0x021E |
| #define CONTROL_PADCONF_SDRC_DQS3N 0x0220 |
| #define CONTROL_PADCONF_STRBEN_DLY0 0x0222 |
| #define CONTROL_PADCONF_STRBEN_DLY1 0x0224 |
| #define CONTROL_PADCONF_SYS_BOOT8 0x0226 |
| |
| /* AM/DM37xx specific */ |
| #define CONTROL_PADCONF_GPIO112 0x0134 |
| #define CONTROL_PADCONF_GPIO113 0x0136 |
| #define CONTROL_PADCONF_GPIO114 0x0138 |
| #define CONTROL_PADCONF_GPIO115 0x013A |
| #define CONTROL_PADCONF_GPIO127 0x0A54 |
| #define CONTROL_PADCONF_GPIO126 0x0A56 |
| #define CONTROL_PADCONF_GPIO128 0x0A58 |
| #define CONTROL_PADCONF_GPIO129 0x0A5A |
| |
| /* AM/DM37xx specific: gpio_127, gpio_127 and gpio_129 require configuration |
| * of the extended drain cells */ |
| #define OMAP34XX_CTRL_WKUP_CTRL (OMAP34XX_CTRL_BASE + 0x0A5C) |
| #define OMAP34XX_CTRL_WKUP_CTRL_GPIO_IO_PWRDNZ (1<<6) |
| |
| #define MUX_VAL(OFFSET, VALUE)\ |
| writew((VALUE), OMAP34XX_CTRL_BASE + (OFFSET)); |
| |
| #define CP(x) (CONTROL_PADCONF_##x) |
| |
| #endif |