include/configs/k2hk_evm.h - github/trini/u-boot - Gitiles

 /*
  * Configuration header file for TI's k2hk-evm
  *
  * (C) Copyright 2012-2014
  *     Texas Instruments Incorporated, <www.ti.com>
  *
  * SPDX-License-Identifier:     GPL-2.0+
  */

 #ifndef __CONFIG_K2HK_EVM_H
 #define __CONFIG_K2HK_EVM_H

 /* Platform type */
 #define CONFIG_SOC_K2HK
 #define CONFIG_K2HK_EVM

 /* U-Boot Build Configuration */
 #define CONFIG_SKIP_LOWLEVEL_INIT       /* U-Boot is a 2nd stage loader */
 #define CONFIG_SYS_NO_FLASH             /* that is, no *NOR* flash */
 #define CONFIG_SYS_CONSOLE_INFO_QUIET
 #define CONFIG_BOARD_EARLY_INIT_F
 #define CONFIG_SYS_THUMB_BUILD

 /* SoC Configuration */
 #define CONFIG_ARMV7
 #define CONFIG_ARCH_CPU_INIT
 #define CONFIG_SYS_ARCH_TIMER
 #define CONFIG_SYS_HZ                   1000
 #define CONFIG_SYS_TEXT_BASE            0x0c001000
 #define CONFIG_SPL_TARGET               "u-boot-spi.gph"
 #define CONFIG_SYS_DCACHE_OFF

 /* Memory Configuration */
 #define CONFIG_NR_DRAM_BANKS            2
 #define CONFIG_SYS_SDRAM_BASE           0x80000000
 #define CONFIG_SYS_LPAE_SDRAM_BASE      0x800000000
 #define CONFIG_MAX_RAM_BANK_SIZE        (2 << 30)       /* 2GB */
 #define CONFIG_STACKSIZE                (512 << 10)     /* 512 KiB */
 #define CONFIG_SYS_MALLOC_LEN           (4 << 20)       /* 4 MiB */
 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_TEXT_BASE - \
 					 GENERATED_GBL_DATA_SIZE)

 /* SPL SPI Loader Configuration */
 #define CONFIG_SPL_TEXT_BASE            0x0c200000
 #define CONFIG_SPL_PAD_TO               65536
 #define CONFIG_SPL_MAX_SIZE             (CONFIG_SPL_PAD_TO - 8)
 #define CONFIG_SPL_BSS_START_ADDR       (CONFIG_SPL_TEXT_BASE + \
 					 CONFIG_SPL_MAX_SIZE)
 #define CONFIG_SPL_BSS_MAX_SIZE         (32 * 1024)
 #define CONFIG_SYS_SPL_MALLOC_START     (CONFIG_SPL_BSS_START_ADDR + \
 					 CONFIG_SPL_BSS_MAX_SIZE)
 #define CONFIG_SYS_SPL_MALLOC_SIZE      (32 * 1024)
 #define CONFIG_SPL_STACK_SIZE           (8 * 1024)
 #define CONFIG_SPL_STACK                (CONFIG_SYS_SPL_MALLOC_START + \
 					 CONFIG_SYS_SPL_MALLOC_SIZE + \
 					 CONFIG_SPL_STACK_SIZE - 4)
 #define CONFIG_SPL_LIBCOMMON_SUPPORT
 #define CONFIG_SPL_LIBGENERIC_SUPPORT
 #define CONFIG_SPL_SERIAL_SUPPORT
 #define CONFIG_SPL_SPI_FLASH_SUPPORT
 #define CONFIG_SPL_SPI_SUPPORT
 #define CONFIG_SPL_BOARD_INIT
 #define CONFIG_SPL_SPI_LOAD
 #define CONFIG_SPL_SPI_BUS              0
 #define CONFIG_SPL_SPI_CS               0
 #define CONFIG_SYS_SPI_U_BOOT_OFFS      CONFIG_SPL_PAD_TO
 #define CONFIG_SPL_FRAMEWORK

 /* UART Configuration */
 #define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_MEM32
 #define CONFIG_SYS_NS16550_REG_SIZE     -4
 #define CONFIG_SYS_NS16550_COM1         K2HK_UART0_BASE
 #define CONFIG_SYS_NS16550_CLK          clk_get_rate(K2HK_CLK1_6)
 #define CONFIG_CONS_INDEX               1
 #define CONFIG_BAUDRATE                 115200

 /* SPI Configuration */
 #define CONFIG_SPI
 #define CONFIG_SPI_FLASH
 #define CONFIG_SPI_FLASH_STMICRO
 #define CONFIG_DAVINCI_SPI
 #define CONFIG_SYS_SPI0
 #define CONFIG_SYS_SPI_BASE             K2HK_SPI_BASE
 #define CONFIG_SYS_SPI0_NUM_CS          4
 #define CONFIG_SYS_SPI1
 #define CONFIG_SYS_SPI1_BASE            K2HK_SPI1_BASE
 #define CONFIG_SYS_SPI1_NUM_CS          4
 #define CONFIG_SYS_SPI2
 #define CONFIG_SYS_SPI2_NUM_CS          4
 #define CONFIG_SYS_SPI2_BASE            K2HK_SPI2_BASE
 #define CONFIG_CMD_SPI
 #define CONFIG_SYS_SPI_CLK              clk_get_rate(K2HK_LPSC_EMIF25_SPI)
 #define CONFIG_SF_DEFAULT_SPEED         30000000
 #define CONFIG_ENV_SPI_MAX_HZ           CONFIG_SF_DEFAULT_SPEED

 /* I2C Configuration */
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_DAVINCI
 #define CONFIG_SYS_DAVINCI_I2C_SPEED    100000
 #define CONFIG_SYS_DAVINCI_I2C_SLAVE    0x10 /* SMBus host address */
 #define CONFIG_SYS_DAVINCI_I2C_SPEED1   100000
 #define CONFIG_SYS_DAVINCI_I2C_SLAVE1   0x10 /* SMBus host address */
 #define CONFIG_SYS_DAVINCI_I2C_SPEED2   100000
 #define CONFIG_SYS_DAVINCI_I2C_SLAVE2   0x10 /* SMBus host address */
 #define I2C_BUS_MAX                     3

 /* EEPROM definitions */
 #define CONFIG_SYS_I2C_MULTI_EEPROMS
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN         2
 #define CONFIG_SYS_I2C_EEPROM_ADDR             0x50
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS      6
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS  20
 #define CONFIG_ENV_EEPROM_IS_ON_I2C

 /* Network Configuration */
 #define CONFIG_DRIVER_TI_KEYSTONE_NET
 #define CONFIG_MII
 #define CONFIG_BOOTP_DEFAULT
 #define CONFIG_BOOTP_DNS
 #define CONFIG_BOOTP_DNS2
 #define CONFIG_BOOTP_SEND_HOSTNAME
 #define CONFIG_NET_RETRY_COUNT                 32
 #define CONFIG_NET_MULTI
 #define CONFIG_GET_LINK_STATUS_ATTEMPTS        5
 #define CONFIG_SYS_SGMII_REFCLK_MHZ            312
 #define CONFIG_SYS_SGMII_LINERATE_MHZ          1250
 #define CONFIG_SYS_SGMII_RATESCALE             2

 /* NAND Configuration */
 #define CONFIG_NAND_DAVINCI
 #define CONFIG_SYS_NAND_CS                     2
 #define CONFIG_SYS_NAND_USE_FLASH_BBT
 #define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST
 #define CONFIG_SYS_NAND_PAGE_2K

 #define CONFIG_SYS_NAND_LARGEPAGE
 #define CONFIG_SYS_NAND_BASE_LIST       { 0x30000000, }
 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 #define CONFIG_SYS_NAND_MAX_CHIPS       1
 #define CONFIG_SYS_NAND_NO_SUBPAGE_WRITE
 #define CONFIG_ENV_SIZE                 (256 << 10)  /* 256 KiB */
 #define CONFIG_ENV_IS_IN_NAND
 #define CONFIG_ENV_OFFSET               0x100000
 #define CONFIG_MTD_PARTITIONS
 #define CONFIG_MTD_DEVICE
 #define CONFIG_RBTREE
 #define CONFIG_LZO
 #define MTDPARTS_DEFAULT                "mtdparts=davinci_nand.0:" \
 					"1024k(bootloader)ro,512k(params)ro," \
 					"-(ubifs)"
 /* U-Boot command configuration */
 #include <config_cmd_default.h>
 #define CONFIG_CMD_ASKENV
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_I2C
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_SAVES
 #define CONFIG_CMD_MTDPARTS
 #define CONFIG_CMD_NAND
 #define CONFIG_CMD_UBI
 #define CONFIG_CMD_UBIFS
 #define CONFIG_CMD_SF
 #define CONFIG_CMD_EEPROM

 /* U-Boot general configuration */
 #define CONFIG_SYS_GENERIC_BOARD
 #define CONFIG_SYS_PROMPT               "K2HK EVM # "
 #define CONFIG_SYS_CBSIZE               1024
 #define CONFIG_SYS_PBSIZE		2048
 #define CONFIG_SYS_MAXARGS              16
 #define CONFIG_SYS_HUSH_PARSER
 #define CONFIG_SYS_LONGHELP
 #define CONFIG_CRC32_VERIFY
 #define CONFIG_MX_CYCLIC
 #define CONFIG_CMDLINE_EDITING
 #define CONFIG_VERSION_VARIABLE
 #define CONFIG_TIMESTAMP

 #define CONFIG_BOOTDELAY                3
 #define CONFIG_BOOTFILE                 "uImage"
 #define CONFIG_EXTRA_ENV_SETTINGS					\
 	"boot=ramfs\0"							\
 	"tftp_root=/\0"							\
 	"nfs_root=/export\0"						\
 	"mem_lpae=1\0"							\
 	"mem_reserve=512M\0"						\
 	"addr_fdt=0x87000000\0"						\
 	"addr_kern=0x88000000\0"					\
 	"addr_mon=0x0c5f0000\0"						\
 	"addr_uboot=0x87000000\0"					\
 	"addr_fs=0x82000000\0"						\
 	"addr_ubi=0x82000000\0"						\
 	"fdt_high=0xffffffff\0"						\
 	"name_fdt=uImage-k2hk-evm.dtb\0"				\
 	"name_fs=arago-console-image.cpio.gz\0"				\
 	"name_kern=uImage-keystone-evm.bin\0"				\
 	"name_mon=skern-keystone-evm.bin\0"				\
 	"name_uboot=u-boot-spi-keystone-evm.gph\0"			\
 	"name_ubi=keystone-evm-ubifs.ubi\0"				\
 	"run_mon=mon_install ${addr_mon}\0"				\
 	"run_kern=bootm ${addr_kern} - ${addr_fdt}\0"			\
 	"init_net=run args_all args_net\0"				\
 	"init_ubi=run args_all args_ubi; "				\
 		"ubi part ubifs; ubifsmount boot\0"			\
 	"get_fdt_net=dhcp ${addr_fdt} ${tftp_root}/${name_fdt}\0"	\
 	"get_fdt_ubi=ubifsload ${addr_fdt} ${name_fdt}\0"		\
 	"get_kern_net=dhcp ${addr_kern} ${tftp_root}/${name_kern}\0"	\
 	"get_kern_ubi=ubifsload ${addr_kern} ${name_kern}\0"		\
 	"get_mon_net=dhcp ${addr_mon} ${tftp_root}/${name_mon}\0"	\
 	"get_mon_ubi=ubifsload ${addr_mon} ${name_mon}\0"		\
 	"get_uboot_net=dhcp ${addr_uboot} ${tftp_root}/${name_uboot}\0"	\
 	"burn_uboot=sf probe; sf erase 0 0x100000; "			\
 		"sf write ${addr_uboot} 0 ${filesize}\0"		\
 	"args_all=setenv bootargs console=ttyS0,115200n8 rootwait=1\0"	\
 	"args_ubi=setenv bootargs ${bootargs} rootfstype=ubifs "	\
 		"root=ubi0:rootfs rootflags=sync rw ubi.mtd=2,2048\0"	\
 	"args_net=setenv bootargs ${bootargs} rootfstype=nfs "		\
 		"root=/dev/nfs rw nfsroot=${serverip}:${nfs_root},"	\
 		"${nfs_options} ip=dhcp\0"				\
 	"nfs_options=v3,tcp,rsize=4096,wsize=4096\0"			\
 	"get_fdt_ramfs=dhcp ${addr_fdt} ${tftp_root}/${name_fdt}\0"	\
 	"get_kern_ramfs=dhcp ${addr_kern} ${tftp_root}/${name_kern}\0"	\
 	"get_mon_ramfs=dhcp ${addr_mon} ${tftp_root}/${name_mon}\0"	\
 	"get_fs_ramfs=dhcp ${addr_fs} ${tftp_root}/${name_fs}\0"	\
 	"get_ubi_net=dhcp ${addr_ubi} ${tftp_root}/${name_ubi}\0"	\
 	"burn_ubi=nand erase.part ubifs; "				\
 		"nand write ${addr_ubi} ubifs ${filesize}\0"		\
 	"init_ramfs=run args_all args_ramfs get_fs_ramfs\0"		\
 	"args_ramfs=setenv bootargs ${bootargs} earlyprintk "		\
 		"rdinit=/sbin/init rw root=/dev/ram0 "			\
 		"initrd=0x802000000,9M\0"				\
 	"no_post=1\0"							\
 	"mtdparts=mtdparts=davinci_nand.0:"				\
 		"1024k(bootloader)ro,512k(params)ro,522752k(ubifs)\0"
 #define CONFIG_BOOTCOMMAND						\
 	"run init_${boot} get_fdt_${boot} get_mon_${boot} "		\
 		"get_kern_${boot} run_mon run_kern"
 #define CONFIG_BOOTARGS							\

 /* Linux interfacing */
 #define CONFIG_CMDLINE_TAG
 #define CONFIG_SETUP_MEMORY_TAGS
 #define CONFIG_OF_LIBFDT                1
 #define CONFIG_OF_BOARD_SETUP
 #define CONFIG_SYS_BARGSIZE             1024
 #define CONFIG_SYS_LOAD_ADDR            (CONFIG_SYS_SDRAM_BASE + 0x08000000)

 #define CONFIG_SUPPORT_RAW_INITRD

 /* we may include files below only after all above definitions */
 #include <asm/arch/hardware.h>
 #include <asm/arch/clock.h>
 #define CONFIG_SYS_HZ_CLOCK             clk_get_rate(K2HK_CLK1_6)

 #endif /* __CONFIG_K2HK_EVM_H */
	/*
	* Configuration header file for TI's k2hk-evm
	*
	* (C) Copyright 2012-2014
	* Texas Instruments Incorporated, <www.ti.com>
	*
	* SPDX-License-Identifier: GPL-2.0+
	*/

	#ifndef __CONFIG_K2HK_EVM_H
	#define __CONFIG_K2HK_EVM_H

	/* Platform type */
	#define CONFIG_SOC_K2HK
	#define CONFIG_K2HK_EVM

	/* U-Boot Build Configuration */
	#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is a 2nd stage loader */
	#define CONFIG_SYS_NO_FLASH /* that is, no NOR flash */
	#define CONFIG_SYS_CONSOLE_INFO_QUIET
	#define CONFIG_BOARD_EARLY_INIT_F
	#define CONFIG_SYS_THUMB_BUILD

	/* SoC Configuration */
	#define CONFIG_ARMV7
	#define CONFIG_ARCH_CPU_INIT
	#define CONFIG_SYS_ARCH_TIMER
	#define CONFIG_SYS_HZ 1000
	#define CONFIG_SYS_TEXT_BASE 0x0c001000
	#define CONFIG_SPL_TARGET "u-boot-spi.gph"
	#define CONFIG_SYS_DCACHE_OFF

	/* Memory Configuration */
	#define CONFIG_NR_DRAM_BANKS 2
	#define CONFIG_SYS_SDRAM_BASE 0x80000000
	#define CONFIG_SYS_LPAE_SDRAM_BASE 0x800000000
	#define CONFIG_MAX_RAM_BANK_SIZE (2 << 30) /* 2GB */
	#define CONFIG_STACKSIZE (512 << 10) /* 512 KiB */
	#define CONFIG_SYS_MALLOC_LEN (4 << 20) /* 4 MiB */
	#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE - \
	GENERATED_GBL_DATA_SIZE)

	/* SPL SPI Loader Configuration */
	#define CONFIG_SPL_TEXT_BASE 0x0c200000
	#define CONFIG_SPL_PAD_TO 65536
	#define CONFIG_SPL_MAX_SIZE (CONFIG_SPL_PAD_TO - 8)
	#define CONFIG_SPL_BSS_START_ADDR (CONFIG_SPL_TEXT_BASE + \
	CONFIG_SPL_MAX_SIZE)
	#define CONFIG_SPL_BSS_MAX_SIZE (32 * 1024)
	#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SPL_BSS_START_ADDR + \
	CONFIG_SPL_BSS_MAX_SIZE)
	#define CONFIG_SYS_SPL_MALLOC_SIZE (32 * 1024)
	#define CONFIG_SPL_STACK_SIZE (8 * 1024)
	#define CONFIG_SPL_STACK (CONFIG_SYS_SPL_MALLOC_START + \
	CONFIG_SYS_SPL_MALLOC_SIZE + \
	CONFIG_SPL_STACK_SIZE - 4)
	#define CONFIG_SPL_LIBCOMMON_SUPPORT
	#define CONFIG_SPL_LIBGENERIC_SUPPORT
	#define CONFIG_SPL_SERIAL_SUPPORT
	#define CONFIG_SPL_SPI_FLASH_SUPPORT
	#define CONFIG_SPL_SPI_SUPPORT
	#define CONFIG_SPL_BOARD_INIT
	#define CONFIG_SPL_SPI_LOAD
	#define CONFIG_SPL_SPI_BUS 0
	#define CONFIG_SPL_SPI_CS 0
	#define CONFIG_SYS_SPI_U_BOOT_OFFS CONFIG_SPL_PAD_TO
	#define CONFIG_SPL_FRAMEWORK

	/* UART Configuration */
	#define CONFIG_SYS_NS16550
	#define CONFIG_SYS_NS16550_SERIAL
	#define CONFIG_SYS_NS16550_MEM32
	#define CONFIG_SYS_NS16550_REG_SIZE -4
	#define CONFIG_SYS_NS16550_COM1 K2HK_UART0_BASE
	#define CONFIG_SYS_NS16550_CLK clk_get_rate(K2HK_CLK1_6)
	#define CONFIG_CONS_INDEX 1
	#define CONFIG_BAUDRATE 115200

	/* SPI Configuration */
	#define CONFIG_SPI
	#define CONFIG_SPI_FLASH
	#define CONFIG_SPI_FLASH_STMICRO
	#define CONFIG_DAVINCI_SPI
	#define CONFIG_SYS_SPI0
	#define CONFIG_SYS_SPI_BASE K2HK_SPI_BASE
	#define CONFIG_SYS_SPI0_NUM_CS 4
	#define CONFIG_SYS_SPI1
	#define CONFIG_SYS_SPI1_BASE K2HK_SPI1_BASE
	#define CONFIG_SYS_SPI1_NUM_CS 4
	#define CONFIG_SYS_SPI2
	#define CONFIG_SYS_SPI2_NUM_CS 4
	#define CONFIG_SYS_SPI2_BASE K2HK_SPI2_BASE
	#define CONFIG_CMD_SPI
	#define CONFIG_SYS_SPI_CLK clk_get_rate(K2HK_LPSC_EMIF25_SPI)
	#define CONFIG_SF_DEFAULT_SPEED 30000000
	#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED

	/* I2C Configuration */
	#define CONFIG_SYS_I2C
	#define CONFIG_SYS_I2C_DAVINCI
	#define CONFIG_SYS_DAVINCI_I2C_SPEED 100000
	#define CONFIG_SYS_DAVINCI_I2C_SLAVE 0x10 /* SMBus host address */
	#define CONFIG_SYS_DAVINCI_I2C_SPEED1 100000
	#define CONFIG_SYS_DAVINCI_I2C_SLAVE1 0x10 /* SMBus host address */
	#define CONFIG_SYS_DAVINCI_I2C_SPEED2 100000
	#define CONFIG_SYS_DAVINCI_I2C_SLAVE2 0x10 /* SMBus host address */
	#define I2C_BUS_MAX 3

	/* EEPROM definitions */
	#define CONFIG_SYS_I2C_MULTI_EEPROMS
	#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
	#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
	#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 6
	#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 20
	#define CONFIG_ENV_EEPROM_IS_ON_I2C

	/* Network Configuration */
	#define CONFIG_DRIVER_TI_KEYSTONE_NET
	#define CONFIG_MII
	#define CONFIG_BOOTP_DEFAULT
	#define CONFIG_BOOTP_DNS
	#define CONFIG_BOOTP_DNS2
	#define CONFIG_BOOTP_SEND_HOSTNAME
	#define CONFIG_NET_RETRY_COUNT 32
	#define CONFIG_NET_MULTI
	#define CONFIG_GET_LINK_STATUS_ATTEMPTS 5
	#define CONFIG_SYS_SGMII_REFCLK_MHZ 312
	#define CONFIG_SYS_SGMII_LINERATE_MHZ 1250
	#define CONFIG_SYS_SGMII_RATESCALE 2

	/* NAND Configuration */
	#define CONFIG_NAND_DAVINCI
	#define CONFIG_SYS_NAND_CS 2
	#define CONFIG_SYS_NAND_USE_FLASH_BBT
	#define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST
	#define CONFIG_SYS_NAND_PAGE_2K

	#define CONFIG_SYS_NAND_LARGEPAGE
	#define CONFIG_SYS_NAND_BASE_LIST { 0x30000000, }
	#define CONFIG_SYS_MAX_NAND_DEVICE 1
	#define CONFIG_SYS_NAND_MAX_CHIPS 1
	#define CONFIG_SYS_NAND_NO_SUBPAGE_WRITE
	#define CONFIG_ENV_SIZE (256 << 10) /* 256 KiB */
	#define CONFIG_ENV_IS_IN_NAND
	#define CONFIG_ENV_OFFSET 0x100000
	#define CONFIG_MTD_PARTITIONS
	#define CONFIG_MTD_DEVICE
	#define CONFIG_RBTREE
	#define CONFIG_LZO
	#define MTDPARTS_DEFAULT "mtdparts=davinci_nand.0:" \
	"1024k(bootloader)ro,512k(params)ro," \
	"-(ubifs)"
	/* U-Boot command configuration */
	#include <config_cmd_default.h>
	#define CONFIG_CMD_ASKENV
	#define CONFIG_CMD_DHCP
	#define CONFIG_CMD_I2C
	#define CONFIG_CMD_PING
	#define CONFIG_CMD_SAVES
	#define CONFIG_CMD_MTDPARTS
	#define CONFIG_CMD_NAND
	#define CONFIG_CMD_UBI
	#define CONFIG_CMD_UBIFS
	#define CONFIG_CMD_SF
	#define CONFIG_CMD_EEPROM

	/* U-Boot general configuration */
	#define CONFIG_SYS_GENERIC_BOARD
	#define CONFIG_SYS_PROMPT "K2HK EVM # "
	#define CONFIG_SYS_CBSIZE 1024
	#define CONFIG_SYS_PBSIZE 2048
	#define CONFIG_SYS_MAXARGS 16
	#define CONFIG_SYS_HUSH_PARSER
	#define CONFIG_SYS_LONGHELP
	#define CONFIG_CRC32_VERIFY
	#define CONFIG_MX_CYCLIC
	#define CONFIG_CMDLINE_EDITING
	#define CONFIG_VERSION_VARIABLE
	#define CONFIG_TIMESTAMP

	#define CONFIG_BOOTDELAY 3
	#define CONFIG_BOOTFILE "uImage"
	#define CONFIG_EXTRA_ENV_SETTINGS \
	"boot=ramfs\0" \
	"tftp_root=/\0" \
	"nfs_root=/export\0" \
	"mem_lpae=1\0" \
	"mem_reserve=512M\0" \
	"addr_fdt=0x87000000\0" \
	"addr_kern=0x88000000\0" \
	"addr_mon=0x0c5f0000\0" \
	"addr_uboot=0x87000000\0" \
	"addr_fs=0x82000000\0" \
	"addr_ubi=0x82000000\0" \
	"fdt_high=0xffffffff\0" \
	"name_fdt=uImage-k2hk-evm.dtb\0" \
	"name_fs=arago-console-image.cpio.gz\0" \
	"name_kern=uImage-keystone-evm.bin\0" \
	"name_mon=skern-keystone-evm.bin\0" \
	"name_uboot=u-boot-spi-keystone-evm.gph\0" \
	"name_ubi=keystone-evm-ubifs.ubi\0" \
	"run_mon=mon_install ${addr_mon}\0" \
	"run_kern=bootm ${addr_kern} - ${addr_fdt}\0" \
	"init_net=run args_all args_net\0" \
	"init_ubi=run args_all args_ubi; " \
	"ubi part ubifs; ubifsmount boot\0" \
	"get_fdt_net=dhcp ${addr_fdt} ${tftp_root}/${name_fdt}\0" \
	"get_fdt_ubi=ubifsload ${addr_fdt} ${name_fdt}\0" \
	"get_kern_net=dhcp ${addr_kern} ${tftp_root}/${name_kern}\0" \
	"get_kern_ubi=ubifsload ${addr_kern} ${name_kern}\0" \
	"get_mon_net=dhcp ${addr_mon} ${tftp_root}/${name_mon}\0" \
	"get_mon_ubi=ubifsload ${addr_mon} ${name_mon}\0" \
	"get_uboot_net=dhcp ${addr_uboot} ${tftp_root}/${name_uboot}\0" \
	"burn_uboot=sf probe; sf erase 0 0x100000; " \
	"sf write ${addr_uboot} 0 ${filesize}\0" \
	"args_all=setenv bootargs console=ttyS0,115200n8 rootwait=1\0" \
	"args_ubi=setenv bootargs ${bootargs} rootfstype=ubifs " \
	"root=ubi0:rootfs rootflags=sync rw ubi.mtd=2,2048\0" \
	"args_net=setenv bootargs ${bootargs} rootfstype=nfs " \
	"root=/dev/nfs rw nfsroot=${serverip}:${nfs_root}," \
	"${nfs_options} ip=dhcp\0" \
	"nfs_options=v3,tcp,rsize=4096,wsize=4096\0" \
	"get_fdt_ramfs=dhcp ${addr_fdt} ${tftp_root}/${name_fdt}\0" \
	"get_kern_ramfs=dhcp ${addr_kern} ${tftp_root}/${name_kern}\0" \
	"get_mon_ramfs=dhcp ${addr_mon} ${tftp_root}/${name_mon}\0" \
	"get_fs_ramfs=dhcp ${addr_fs} ${tftp_root}/${name_fs}\0" \
	"get_ubi_net=dhcp ${addr_ubi} ${tftp_root}/${name_ubi}\0" \
	"burn_ubi=nand erase.part ubifs; " \
	"nand write ${addr_ubi} ubifs ${filesize}\0" \
	"init_ramfs=run args_all args_ramfs get_fs_ramfs\0" \
	"args_ramfs=setenv bootargs ${bootargs} earlyprintk " \
	"rdinit=/sbin/init rw root=/dev/ram0 " \
	"initrd=0x802000000,9M\0" \
	"no_post=1\0" \
	"mtdparts=mtdparts=davinci_nand.0:" \
	"1024k(bootloader)ro,512k(params)ro,522752k(ubifs)\0"
	#define CONFIG_BOOTCOMMAND \
	"run init_${boot} get_fdt_${boot} get_mon_${boot} " \
	"get_kern_${boot} run_mon run_kern"
	#define CONFIG_BOOTARGS \

	/* Linux interfacing */
	#define CONFIG_CMDLINE_TAG
	#define CONFIG_SETUP_MEMORY_TAGS
	#define CONFIG_OF_LIBFDT 1
	#define CONFIG_OF_BOARD_SETUP
	#define CONFIG_SYS_BARGSIZE 1024
	#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x08000000)

	#define CONFIG_SUPPORT_RAW_INITRD

	/* we may include files below only after all above definitions */
	#include <asm/arch/hardware.h>
	#include <asm/arch/clock.h>
	#define CONFIG_SYS_HZ_CLOCK clk_get_rate(K2HK_CLK1_6)

	#endif /* __CONFIG_K2HK_EVM_H */