board/genesi/mx51_efikamx/efikamx.c - github/trini/u-boot - Gitiles

 /*
  * Copyright (C) 2009 Freescale Semiconductor, Inc.
  * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com>
  * Copyright (C) 2009-2012 Genesi USA, Inc.
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */

 #include <common.h>
 #include <asm/io.h>
 #include <asm/arch/iomux-mx51.h>
 #include <asm/gpio.h>
 #include <asm/errno.h>
 #include <asm/arch/sys_proto.h>
 #include <asm/arch/crm_regs.h>
 #include <asm/arch/clock.h>
 #include <i2c.h>
 #include <mmc.h>
 #include <fsl_esdhc.h>
 #include <power/pmic.h>
 #include <fsl_pmic.h>
 #include <mc13892.h>

 DECLARE_GLOBAL_DATA_PTR;

 /*
  * Compile-time error checking
  */
 #ifndef	CONFIG_MXC_SPI
 #error "CONFIG_MXC_SPI not set, this is essential for board's operation!"
 #endif

 /*
  * Board revisions
  *
  * Note that we get these revisions here for convenience, but we only set
  * up for the production model Smarttop (1.3) and Smartbook (2.0).
  *
  */
 #define	EFIKAMX_BOARD_REV_11	0x1
 #define	EFIKAMX_BOARD_REV_12	0x2
 #define	EFIKAMX_BOARD_REV_13	0x3
 #define	EFIKAMX_BOARD_REV_14	0x4

 #define	EFIKASB_BOARD_REV_13	0x1
 #define	EFIKASB_BOARD_REV_20	0x2

 /*
  * Board identification
  */
 static u32 get_mx_rev(void)
 {
 	u32 rev = 0;
 	/*
 	 * Retrieve board ID:
 	 *
 	 *  gpio: 16 17 11
 	 *  ==============
 	 *	r1.1:  1+ 1  1
 	 *	r1.2:  1  1  0
 	 *	r1.3:  1  0  1
 	 *	r1.4:  1  0  0
 	 *
 	 * + note: r1.1 does not strap this pin properly so it needs to
 	 *         be hacked or ignored.
 	 */

 	/* set to 1 in order to get correct value on board rev 1.1 */
 	gpio_direction_output(IMX_GPIO_NR(3, 16), 1);
 	gpio_direction_input(IMX_GPIO_NR(3, 11));
 	gpio_direction_input(IMX_GPIO_NR(3, 16));
 	gpio_direction_input(IMX_GPIO_NR(3, 17));

 	rev |= (!!gpio_get_value(IMX_GPIO_NR(3, 16))) << 0;
 	rev |= (!!gpio_get_value(IMX_GPIO_NR(3, 17))) << 1;
 	rev |= (!!gpio_get_value(IMX_GPIO_NR(3, 11))) << 2;

 	return (~rev & 0x7) + 1;
 }

 static iomux_v3_cfg_t const efikasb_revision_pads[] = {
 	MX51_PAD_EIM_CS3__GPIO2_28,
 	MX51_PAD_EIM_CS4__GPIO2_29,
 };

 static inline u32 get_sb_rev(void)
 {
 	u32 rev = 0;

 	imx_iomux_v3_setup_multiple_pads(efikasb_revision_pads,
 				ARRAY_SIZE(efikasb_revision_pads));
 	gpio_direction_input(IMX_GPIO_NR(2, 28));
 	gpio_direction_input(IMX_GPIO_NR(2, 29));

 	rev |= (!!gpio_get_value(IMX_GPIO_NR(2, 28))) << 0;
 	rev |= (!!gpio_get_value(IMX_GPIO_NR(2, 29))) << 1;

 	return rev;
 }

 inline uint32_t get_efikamx_rev(void)
 {
 	if (machine_is_efikamx())
 		return get_mx_rev();
 	else if (machine_is_efikasb())
 		return get_sb_rev();
 }

 u32 get_board_rev(void)
 {
 	return get_cpu_rev() | (get_efikamx_rev() << 8);
 }

 /*
  * DRAM initialization
  */
 int dram_init(void)
 {
 	/* dram_init must store complete ramsize in gd->ram_size */
 	gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE,
 						PHYS_SDRAM_1_SIZE);
 	return 0;
 }

 /*
  * UART configuration
  */
 static iomux_v3_cfg_t const efikamx_uart_pads[] = {
 	MX51_PAD_UART1_RXD__UART1_RXD,
 	MX51_PAD_UART1_TXD__UART1_TXD,
 	MX51_PAD_UART1_RTS__UART1_RTS,
 	MX51_PAD_UART1_CTS__UART1_CTS,
 };

 /*
  * SPI configuration
  */
 static iomux_v3_cfg_t const efikamx_spi_pads[] = {
 	MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI,
 	MX51_PAD_CSPI1_MISO__ECSPI1_MISO,
 	MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK,
 	MX51_PAD_CSPI1_SS0__GPIO4_24,
 	MX51_PAD_CSPI1_SS1__GPIO4_25,
 	MX51_PAD_GPIO1_6__GPIO1_6,
 };

 #define EFIKAMX_SPI_SS0		IMX_GPIO_NR(4, 24)
 #define EFIKAMX_SPI_SS1		IMX_GPIO_NR(4, 25)
 #define EFIKAMX_PMIC_IRQ	IMX_GPIO_NR(1, 6)

 /*
  * PMIC configuration
  */
 #ifdef CONFIG_MXC_SPI
 static void power_init(void)
 {
 	unsigned int val;
 	struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)MXC_CCM_BASE;
 	struct pmic *p;
 	int ret;

 	ret = pmic_init(CONFIG_FSL_PMIC_BUS);
 	if (ret)
 		return;

 	p = pmic_get("FSL_PMIC");
 	if (!p)
 		return;

 	/* Write needed to Power Gate 2 register */
 	pmic_reg_read(p, REG_POWER_MISC, &val);
 	val &= ~PWGT2SPIEN;
 	pmic_reg_write(p, REG_POWER_MISC, val);

 	/* Externally powered */
 	pmic_reg_read(p, REG_CHARGE, &val);
 	val |= ICHRG0 | ICHRG1 | ICHRG2 | ICHRG3 | CHGAUTOB;
 	pmic_reg_write(p, REG_CHARGE, val);

 	/* power up the system first */
 	pmic_reg_write(p, REG_POWER_MISC, PWUP);

 	/* Set core voltage to 1.1V */
 	pmic_reg_read(p, REG_SW_0, &val);
 	val = (val & ~SWx_VOLT_MASK) | SWx_1_100V;
 	pmic_reg_write(p, REG_SW_0, val);

 	/* Setup VCC (SW2) to 1.25 */
 	pmic_reg_read(p, REG_SW_1, &val);
 	val = (val & ~SWx_VOLT_MASK) | SWx_1_250V;
 	pmic_reg_write(p, REG_SW_1, val);

 	/* Setup 1V2_DIG1 (SW3) to 1.25 */
 	pmic_reg_read(p, REG_SW_2, &val);
 	val = (val & ~SWx_VOLT_MASK) | SWx_1_250V;
 	pmic_reg_write(p, REG_SW_2, val);
 	udelay(50);

 	/* Raise the core frequency to 800MHz */
 	writel(0x0, &mxc_ccm->cacrr);

 	/* Set switchers in Auto in NORMAL mode & STANDBY mode */
 	/* Setup the switcher mode for SW1 & SW2*/
 	pmic_reg_read(p, REG_SW_4, &val);
 	val = (val & ~((SWMODE_MASK << SWMODE1_SHIFT) |
 		(SWMODE_MASK << SWMODE2_SHIFT)));
 	val |= (SWMODE_AUTO_AUTO << SWMODE1_SHIFT) |
 		(SWMODE_AUTO_AUTO << SWMODE2_SHIFT);
 	pmic_reg_write(p, REG_SW_4, val);

 	/* Setup the switcher mode for SW3 & SW4 */
 	pmic_reg_read(p, REG_SW_5, &val);
 	val = (val & ~((SWMODE_MASK << SWMODE3_SHIFT) |
 		(SWMODE_MASK << SWMODE4_SHIFT)));
 	val |= (SWMODE_AUTO_AUTO << SWMODE3_SHIFT) |
 		(SWMODE_AUTO_AUTO << SWMODE4_SHIFT);
 	pmic_reg_write(p, REG_SW_5, val);

 	/* Set VDIG to 1.8V, VGEN3 to 1.8V, VCAM to 2.6V */
 	pmic_reg_read(p, REG_SETTING_0, &val);
 	val &= ~(VCAM_MASK | VGEN3_MASK | VDIG_MASK);
 	val |= VDIG_1_8 | VGEN3_1_8 | VCAM_2_6;
 	pmic_reg_write(p, REG_SETTING_0, val);

 	/* Set VVIDEO to 2.775V, VAUDIO to 3V, VSD to 3.15V */
 	pmic_reg_read(p, REG_SETTING_1, &val);
 	val &= ~(VVIDEO_MASK | VSD_MASK | VAUDIO_MASK);
 	val |= VSD_3_15 | VAUDIO_3_0 | VVIDEO_2_775 | VGEN1_1_2 | VGEN2_3_15;
 	pmic_reg_write(p, REG_SETTING_1, val);

 	/* Enable VGEN1, VGEN2, VDIG, VPLL */
 	pmic_reg_read(p, REG_MODE_0, &val);
 	val |= VGEN1EN | VDIGEN | VGEN2EN | VPLLEN;
 	pmic_reg_write(p, REG_MODE_0, val);

 	/* Configure VGEN3 and VCAM regulators to use external PNP */
 	val = VGEN3CONFIG | VCAMCONFIG;
 	pmic_reg_write(p, REG_MODE_1, val);
 	udelay(200);

 	/* Enable VGEN3, VCAM, VAUDIO, VVIDEO, VSD regulators */
 	val = VGEN3EN | VGEN3CONFIG | VCAMEN | VCAMCONFIG |
 		VVIDEOEN | VAUDIOEN | VSDEN;
 	pmic_reg_write(p, REG_MODE_1, val);

 	pmic_reg_read(p, REG_POWER_CTL2, &val);
 	val |= WDIRESET;
 	pmic_reg_write(p, REG_POWER_CTL2, val);

 	udelay(2500);
 }
 #else
 static inline void power_init(void) { }
 #endif

 /*
  * MMC configuration
  */
 #ifdef CONFIG_FSL_ESDHC

 struct fsl_esdhc_cfg esdhc_cfg[2] = {
 	{MMC_SDHC1_BASE_ADDR},
 	{MMC_SDHC2_BASE_ADDR},
 };

 static iomux_v3_cfg_t const efikamx_sdhc1_pads[] = {
 	MX51_PAD_SD1_CMD__SD1_CMD,
 	MX51_PAD_SD1_CLK__SD1_CLK,
 	MX51_PAD_SD1_DATA0__SD1_DATA0,
 	MX51_PAD_SD1_DATA1__SD1_DATA1,
 	MX51_PAD_SD1_DATA2__SD1_DATA2,
 	MX51_PAD_SD1_DATA3__SD1_DATA3,
 	MX51_PAD_GPIO1_1__SD1_WP,
 };

 #define EFIKAMX_SDHC1_WP	IMX_GPIO_NR(1, 1)

 static iomux_v3_cfg_t const efikamx_sdhc1_cd_pads[] = {
 	MX51_PAD_GPIO1_0__SD1_CD,
 	NEW_PAD_CTRL(MX51_PAD_EIM_CS2__GPIO2_27, MX51_ESDHC_PAD_CTRL),
 };

 #define EFIKAMX_SDHC1_CD	IMX_GPIO_NR(1, 0)
 #define EFIKASB_SDHC1_CD	IMX_GPIO_NR(2, 27)

 static iomux_v3_cfg_t const efikasb_sdhc2_pads[] = {
 	MX51_PAD_SD2_CMD__SD2_CMD,
 	MX51_PAD_SD2_CLK__SD2_CLK,
 	MX51_PAD_SD2_DATA0__SD2_DATA0,
 	MX51_PAD_SD2_DATA1__SD2_DATA1,
 	MX51_PAD_SD2_DATA2__SD2_DATA2,
 	MX51_PAD_SD2_DATA3__SD2_DATA3,
 	MX51_PAD_GPIO1_7__SD2_WP,
 	MX51_PAD_GPIO1_8__SD2_CD,
 };

 #define EFIKASB_SDHC2_CD	IMX_GPIO_NR(1, 8)
 #define EFIKASB_SDHC2_WP	IMX_GPIO_NR(1, 7)

 static inline uint32_t efikamx_mmc_getcd(u32 base)
 {
 	if (base == MMC_SDHC1_BASE_ADDR)
 		if (machine_is_efikamx())
 			return EFIKAMX_SDHC1_CD;
 		else
 			return EFIKASB_SDHC1_CD;
 	else
 		return EFIKASB_SDHC2_CD;
 }

 int board_mmc_getcd(struct mmc *mmc)
 {
 	struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
 	uint32_t cd = efikamx_mmc_getcd(cfg->esdhc_base);
 	int ret = !gpio_get_value(cd);

 	return ret;
 }

 int board_mmc_init(bd_t *bis)
 {
 	int ret;

 	/*
 	 * All Efika MX boards use eSDHC1 with a common write-protect GPIO
 	 */
 	imx_iomux_v3_setup_multiple_pads(efikamx_sdhc1_pads,
 					ARRAY_SIZE(efikamx_sdhc1_pads));
 	gpio_direction_input(EFIKAMX_SDHC1_WP);

 	/*
 	 * Smartbook and Smarttop differ on the location of eSDHC1
 	 * carrier-detect GPIO
 	 */
 	if (machine_is_efikamx()) {
 		imx_iomux_v3_setup_pad(efikamx_sdhc1_cd_pads[0]);
 		gpio_direction_input(EFIKAMX_SDHC1_CD);
 	} else if (machine_is_efikasb()) {
 		imx_iomux_v3_setup_pad(efikamx_sdhc1_cd_pads[1]);
 		gpio_direction_input(EFIKASB_SDHC1_CD);
 	}

 	esdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
 	esdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);

 	ret = fsl_esdhc_initialize(bis, &esdhc_cfg[0]);

 	if (machine_is_efikasb()) {

 		imx_iomux_v3_setup_multiple_pads(efikasb_sdhc2_pads,
 						ARRAY_SIZE(efikasb_sdhc2_pads));
 		gpio_direction_input(EFIKASB_SDHC2_CD);
 		gpio_direction_input(EFIKASB_SDHC2_WP);
 		if (!ret)
 			ret = fsl_esdhc_initialize(bis, &esdhc_cfg[1]);
 	}

 	return ret;
 }
 #endif

 /*
  * PATA
  */
 static iomux_v3_cfg_t const efikamx_pata_pads[] = {
 	MX51_PAD_NANDF_WE_B__PATA_DIOW,
 	MX51_PAD_NANDF_RE_B__PATA_DIOR,
 	MX51_PAD_NANDF_ALE__PATA_BUFFER_EN,
 	MX51_PAD_NANDF_CLE__PATA_RESET_B,
 	MX51_PAD_NANDF_WP_B__PATA_DMACK,
 	MX51_PAD_NANDF_RB0__PATA_DMARQ,
 	MX51_PAD_NANDF_RB1__PATA_IORDY,
 	MX51_PAD_GPIO_NAND__PATA_INTRQ,
 	MX51_PAD_NANDF_CS2__PATA_CS_0,
 	MX51_PAD_NANDF_CS3__PATA_CS_1,
 	MX51_PAD_NANDF_CS4__PATA_DA_0,
 	MX51_PAD_NANDF_CS5__PATA_DA_1,
 	MX51_PAD_NANDF_CS6__PATA_DA_2,
 	MX51_PAD_NANDF_D15__PATA_DATA15,
 	MX51_PAD_NANDF_D14__PATA_DATA14,
 	MX51_PAD_NANDF_D13__PATA_DATA13,
 	MX51_PAD_NANDF_D12__PATA_DATA12,
 	MX51_PAD_NANDF_D11__PATA_DATA11,
 	MX51_PAD_NANDF_D10__PATA_DATA10,
 	MX51_PAD_NANDF_D9__PATA_DATA9,
 	MX51_PAD_NANDF_D8__PATA_DATA8,
 	MX51_PAD_NANDF_D7__PATA_DATA7,
 	MX51_PAD_NANDF_D6__PATA_DATA6,
 	MX51_PAD_NANDF_D5__PATA_DATA5,
 	MX51_PAD_NANDF_D4__PATA_DATA4,
 	MX51_PAD_NANDF_D3__PATA_DATA3,
 	MX51_PAD_NANDF_D2__PATA_DATA2,
 	MX51_PAD_NANDF_D1__PATA_DATA1,
 	MX51_PAD_NANDF_D0__PATA_DATA0,
 };

 /*
  * EHCI USB
  */
 #ifdef	CONFIG_CMD_USB
 extern void setup_iomux_usb(void);
 #else
 static inline void setup_iomux_usb(void) { }
 #endif

 /*
  * LED configuration
  *
  * Smarttop LED pad config is done in the DCD
  *
  */
 #define EFIKAMX_LED_BLUE	IMX_GPIO_NR(3, 13)
 #define EFIKAMX_LED_GREEN	IMX_GPIO_NR(3, 14)
 #define EFIKAMX_LED_RED		IMX_GPIO_NR(3, 15)

 static iomux_v3_cfg_t const efikasb_led_pads[] = {
 	MX51_PAD_GPIO1_3__GPIO1_3,
 	MX51_PAD_EIM_CS0__GPIO2_25,
 };

 #define EFIKASB_CAPSLOCK_LED	IMX_GPIO_NR(2, 25)
 #define EFIKASB_MESSAGE_LED	IMX_GPIO_NR(1, 3) /* Note: active low */

 /*
  * Board initialization
  */
 int board_early_init_f(void)
 {
 	if (machine_is_efikasb()) {
 		imx_iomux_v3_setup_multiple_pads(efikasb_led_pads,
 						ARRAY_SIZE(efikasb_led_pads));
 		gpio_direction_output(EFIKASB_CAPSLOCK_LED, 0);
 		gpio_direction_output(EFIKASB_MESSAGE_LED, 1);
 	} else if (machine_is_efikamx()) {
 		/*
 		 * Set up GPIO directions for LEDs.
 		 * IOMUX has been done in the DCD already.
 		 * Turn the red LED on for pre-relocation code.
 		 */
 		gpio_direction_output(EFIKAMX_LED_BLUE, 0);
 		gpio_direction_output(EFIKAMX_LED_GREEN, 0);
 		gpio_direction_output(EFIKAMX_LED_RED, 1);
 	}

 	/*
 	 * Both these pad configurations for UART and SPI are kind of redundant
 	 * since they are the Power-On Defaults for the i.MX51. But, it seems we
 	 * should make absolutely sure that they are set up correctly.
 	 */
 	imx_iomux_v3_setup_multiple_pads(efikamx_uart_pads,
 					ARRAY_SIZE(efikamx_uart_pads));
 	imx_iomux_v3_setup_multiple_pads(efikamx_spi_pads,
 					ARRAY_SIZE(efikamx_spi_pads));

 	/* not technically required for U-Boot operation but do it anyway. */
 	gpio_direction_input(EFIKAMX_PMIC_IRQ);
 	/* Deselect both CS for now, otherwise NOR doesn't probe properly. */
 	gpio_direction_output(EFIKAMX_SPI_SS0, 0);
 	gpio_direction_output(EFIKAMX_SPI_SS1, 1);

 	return 0;
 }

 int board_init(void)
 {
 	gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;

 	return 0;
 }

 int board_late_init(void)
 {
 	if (machine_is_efikamx()) {
 		/*
 		 * Set up Blue LED for "In U-Boot" status.
 		 * We're all relocated and ready to U-Boot!
 		 */
 		gpio_set_value(EFIKAMX_LED_RED, 0);
 		gpio_set_value(EFIKAMX_LED_GREEN, 0);
 		gpio_set_value(EFIKAMX_LED_BLUE, 1);
 	}

 	power_init();

 	imx_iomux_v3_setup_multiple_pads(efikamx_pata_pads,
 					ARRAY_SIZE(efikamx_pata_pads));
 	setup_iomux_usb();

 	return 0;
 }

 int checkboard(void)
 {
 	u32 rev = get_efikamx_rev();

 	printf("Board: Genesi Efika MX ");
 	if (machine_is_efikamx())
 		printf("Smarttop (1.%i)\n", rev & 0xf);
 	else if (machine_is_efikasb())
 		printf("Smartbook\n");

 	return 0;
 }
	/*
	* Copyright (C) 2009 Freescale Semiconductor, Inc.
	* Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com>
	* Copyright (C) 2009-2012 Genesi USA, Inc.
	*
	* SPDX-License-Identifier: GPL-2.0+
	*/

	#include <common.h>
	#include <asm/io.h>
	#include <asm/arch/iomux-mx51.h>
	#include <asm/gpio.h>
	#include <asm/errno.h>
	#include <asm/arch/sys_proto.h>
	#include <asm/arch/crm_regs.h>
	#include <asm/arch/clock.h>
	#include <i2c.h>
	#include <mmc.h>
	#include <fsl_esdhc.h>
	#include <power/pmic.h>
	#include <fsl_pmic.h>
	#include <mc13892.h>

	DECLARE_GLOBAL_DATA_PTR;

	/*
	* Compile-time error checking
	*/
	#ifndef CONFIG_MXC_SPI
	#error "CONFIG_MXC_SPI not set, this is essential for board's operation!"
	#endif

	/*
	* Board revisions
	*
	* Note that we get these revisions here for convenience, but we only set
	* up for the production model Smarttop (1.3) and Smartbook (2.0).
	*
	*/
	#define EFIKAMX_BOARD_REV_11 0x1
	#define EFIKAMX_BOARD_REV_12 0x2
	#define EFIKAMX_BOARD_REV_13 0x3
	#define EFIKAMX_BOARD_REV_14 0x4

	#define EFIKASB_BOARD_REV_13 0x1
	#define EFIKASB_BOARD_REV_20 0x2

	/*
	* Board identification
	*/
	static u32 get_mx_rev(void)
	{
	u32 rev = 0;
	/*
	* Retrieve board ID:
	*
	* gpio: 16 17 11
	* ==============
	* r1.1: 1+ 1 1
	* r1.2: 1 1 0
	* r1.3: 1 0 1
	* r1.4: 1 0 0
	*
	* + note: r1.1 does not strap this pin properly so it needs to
	* be hacked or ignored.
	*/

	/* set to 1 in order to get correct value on board rev 1.1 */
	gpio_direction_output(IMX_GPIO_NR(3, 16), 1);
	gpio_direction_input(IMX_GPIO_NR(3, 11));
	gpio_direction_input(IMX_GPIO_NR(3, 16));
	gpio_direction_input(IMX_GPIO_NR(3, 17));

	rev \|= (!!gpio_get_value(IMX_GPIO_NR(3, 16))) << 0;
	rev \|= (!!gpio_get_value(IMX_GPIO_NR(3, 17))) << 1;
	rev \|= (!!gpio_get_value(IMX_GPIO_NR(3, 11))) << 2;

	return (~rev & 0x7) + 1;
	}

	static iomux_v3_cfg_t const efikasb_revision_pads[] = {
	MX51_PAD_EIM_CS3__GPIO2_28,
	MX51_PAD_EIM_CS4__GPIO2_29,
	};

	static inline u32 get_sb_rev(void)
	{
	u32 rev = 0;

	imx_iomux_v3_setup_multiple_pads(efikasb_revision_pads,
	ARRAY_SIZE(efikasb_revision_pads));
	gpio_direction_input(IMX_GPIO_NR(2, 28));
	gpio_direction_input(IMX_GPIO_NR(2, 29));

	rev \|= (!!gpio_get_value(IMX_GPIO_NR(2, 28))) << 0;
	rev \|= (!!gpio_get_value(IMX_GPIO_NR(2, 29))) << 1;

	return rev;
	}

	inline uint32_t get_efikamx_rev(void)
	{
	if (machine_is_efikamx())
	return get_mx_rev();
	else if (machine_is_efikasb())
	return get_sb_rev();
	}

	u32 get_board_rev(void)
	{
	return get_cpu_rev() \| (get_efikamx_rev() << 8);
	}

	/*
	* DRAM initialization
	*/
	int dram_init(void)
	{
	/* dram_init must store complete ramsize in gd->ram_size */
	gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE,
	PHYS_SDRAM_1_SIZE);
	return 0;
	}

	/*
	* UART configuration
	*/
	static iomux_v3_cfg_t const efikamx_uart_pads[] = {
	MX51_PAD_UART1_RXD__UART1_RXD,
	MX51_PAD_UART1_TXD__UART1_TXD,
	MX51_PAD_UART1_RTS__UART1_RTS,
	MX51_PAD_UART1_CTS__UART1_CTS,
	};

	/*
	* SPI configuration
	*/
	static iomux_v3_cfg_t const efikamx_spi_pads[] = {
	MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI,
	MX51_PAD_CSPI1_MISO__ECSPI1_MISO,
	MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK,
	MX51_PAD_CSPI1_SS0__GPIO4_24,
	MX51_PAD_CSPI1_SS1__GPIO4_25,
	MX51_PAD_GPIO1_6__GPIO1_6,
	};

	#define EFIKAMX_SPI_SS0 IMX_GPIO_NR(4, 24)
	#define EFIKAMX_SPI_SS1 IMX_GPIO_NR(4, 25)
	#define EFIKAMX_PMIC_IRQ IMX_GPIO_NR(1, 6)

	/*
	* PMIC configuration
	*/
	#ifdef CONFIG_MXC_SPI
	static void power_init(void)
	{
	unsigned int val;
	struct mxc_ccm_reg mxc_ccm = (struct mxc_ccm_reg )MXC_CCM_BASE;
	struct pmic *p;
	int ret;

	ret = pmic_init(CONFIG_FSL_PMIC_BUS);
	if (ret)
	return;

	p = pmic_get("FSL_PMIC");
	if (!p)
	return;

	/* Write needed to Power Gate 2 register */
	pmic_reg_read(p, REG_POWER_MISC, &val);
	val &= ~PWGT2SPIEN;
	pmic_reg_write(p, REG_POWER_MISC, val);

	/* Externally powered */
	pmic_reg_read(p, REG_CHARGE, &val);
	val \|= ICHRG0 \| ICHRG1 \| ICHRG2 \| ICHRG3 \| CHGAUTOB;
	pmic_reg_write(p, REG_CHARGE, val);

	/* power up the system first */
	pmic_reg_write(p, REG_POWER_MISC, PWUP);

	/* Set core voltage to 1.1V */
	pmic_reg_read(p, REG_SW_0, &val);
	val = (val & ~SWx_VOLT_MASK) \| SWx_1_100V;
	pmic_reg_write(p, REG_SW_0, val);

	/* Setup VCC (SW2) to 1.25 */
	pmic_reg_read(p, REG_SW_1, &val);
	val = (val & ~SWx_VOLT_MASK) \| SWx_1_250V;
	pmic_reg_write(p, REG_SW_1, val);

	/* Setup 1V2_DIG1 (SW3) to 1.25 */
	pmic_reg_read(p, REG_SW_2, &val);
	val = (val & ~SWx_VOLT_MASK) \| SWx_1_250V;
	pmic_reg_write(p, REG_SW_2, val);
	udelay(50);

	/* Raise the core frequency to 800MHz */
	writel(0x0, &mxc_ccm->cacrr);

	/* Set switchers in Auto in NORMAL mode & STANDBY mode */
	/* Setup the switcher mode for SW1 & SW2*/
	pmic_reg_read(p, REG_SW_4, &val);
	val = (val & ~((SWMODE_MASK << SWMODE1_SHIFT) \|
	(SWMODE_MASK << SWMODE2_SHIFT)));
	val \|= (SWMODE_AUTO_AUTO << SWMODE1_SHIFT) \|
	(SWMODE_AUTO_AUTO << SWMODE2_SHIFT);
	pmic_reg_write(p, REG_SW_4, val);

	/* Setup the switcher mode for SW3 & SW4 */
	pmic_reg_read(p, REG_SW_5, &val);
	val = (val & ~((SWMODE_MASK << SWMODE3_SHIFT) \|
	(SWMODE_MASK << SWMODE4_SHIFT)));
	val \|= (SWMODE_AUTO_AUTO << SWMODE3_SHIFT) \|
	(SWMODE_AUTO_AUTO << SWMODE4_SHIFT);
	pmic_reg_write(p, REG_SW_5, val);

	/* Set VDIG to 1.8V, VGEN3 to 1.8V, VCAM to 2.6V */
	pmic_reg_read(p, REG_SETTING_0, &val);
	val &= ~(VCAM_MASK \| VGEN3_MASK \| VDIG_MASK);
	val \|= VDIG_1_8 \| VGEN3_1_8 \| VCAM_2_6;
	pmic_reg_write(p, REG_SETTING_0, val);

	/* Set VVIDEO to 2.775V, VAUDIO to 3V, VSD to 3.15V */
	pmic_reg_read(p, REG_SETTING_1, &val);
	val &= ~(VVIDEO_MASK \| VSD_MASK \| VAUDIO_MASK);
	val \|= VSD_3_15 \| VAUDIO_3_0 \| VVIDEO_2_775 \| VGEN1_1_2 \| VGEN2_3_15;
	pmic_reg_write(p, REG_SETTING_1, val);

	/* Enable VGEN1, VGEN2, VDIG, VPLL */
	pmic_reg_read(p, REG_MODE_0, &val);
	val \|= VGEN1EN \| VDIGEN \| VGEN2EN \| VPLLEN;
	pmic_reg_write(p, REG_MODE_0, val);

	/* Configure VGEN3 and VCAM regulators to use external PNP */
	val = VGEN3CONFIG \| VCAMCONFIG;
	pmic_reg_write(p, REG_MODE_1, val);
	udelay(200);

	/* Enable VGEN3, VCAM, VAUDIO, VVIDEO, VSD regulators */
	val = VGEN3EN \| VGEN3CONFIG \| VCAMEN \| VCAMCONFIG \|
	VVIDEOEN \| VAUDIOEN \| VSDEN;
	pmic_reg_write(p, REG_MODE_1, val);

	pmic_reg_read(p, REG_POWER_CTL2, &val);
	val \|= WDIRESET;
	pmic_reg_write(p, REG_POWER_CTL2, val);

	udelay(2500);
	}
	#else
	static inline void power_init(void) { }
	#endif

	/*
	* MMC configuration
	*/
	#ifdef CONFIG_FSL_ESDHC

	struct fsl_esdhc_cfg esdhc_cfg[2] = {
	{MMC_SDHC1_BASE_ADDR},
	{MMC_SDHC2_BASE_ADDR},
	};

	static iomux_v3_cfg_t const efikamx_sdhc1_pads[] = {
	MX51_PAD_SD1_CMD__SD1_CMD,
	MX51_PAD_SD1_CLK__SD1_CLK,
	MX51_PAD_SD1_DATA0__SD1_DATA0,
	MX51_PAD_SD1_DATA1__SD1_DATA1,
	MX51_PAD_SD1_DATA2__SD1_DATA2,
	MX51_PAD_SD1_DATA3__SD1_DATA3,
	MX51_PAD_GPIO1_1__SD1_WP,
	};

	#define EFIKAMX_SDHC1_WP IMX_GPIO_NR(1, 1)

	static iomux_v3_cfg_t const efikamx_sdhc1_cd_pads[] = {
	MX51_PAD_GPIO1_0__SD1_CD,
	NEW_PAD_CTRL(MX51_PAD_EIM_CS2__GPIO2_27, MX51_ESDHC_PAD_CTRL),
	};

	#define EFIKAMX_SDHC1_CD IMX_GPIO_NR(1, 0)
	#define EFIKASB_SDHC1_CD IMX_GPIO_NR(2, 27)

	static iomux_v3_cfg_t const efikasb_sdhc2_pads[] = {
	MX51_PAD_SD2_CMD__SD2_CMD,
	MX51_PAD_SD2_CLK__SD2_CLK,
	MX51_PAD_SD2_DATA0__SD2_DATA0,
	MX51_PAD_SD2_DATA1__SD2_DATA1,
	MX51_PAD_SD2_DATA2__SD2_DATA2,
	MX51_PAD_SD2_DATA3__SD2_DATA3,
	MX51_PAD_GPIO1_7__SD2_WP,
	MX51_PAD_GPIO1_8__SD2_CD,
	};

	#define EFIKASB_SDHC2_CD IMX_GPIO_NR(1, 8)
	#define EFIKASB_SDHC2_WP IMX_GPIO_NR(1, 7)

	static inline uint32_t efikamx_mmc_getcd(u32 base)
	{
	if (base == MMC_SDHC1_BASE_ADDR)
	if (machine_is_efikamx())
	return EFIKAMX_SDHC1_CD;
	else
	return EFIKASB_SDHC1_CD;
	else
	return EFIKASB_SDHC2_CD;
	}

	int board_mmc_getcd(struct mmc *mmc)
	{
	struct fsl_esdhc_cfg cfg = (struct fsl_esdhc_cfg )mmc->priv;
	uint32_t cd = efikamx_mmc_getcd(cfg->esdhc_base);
	int ret = !gpio_get_value(cd);

	return ret;
	}

	int board_mmc_init(bd_t *bis)
	{
	int ret;

	/*
	* All Efika MX boards use eSDHC1 with a common write-protect GPIO
	*/
	imx_iomux_v3_setup_multiple_pads(efikamx_sdhc1_pads,
	ARRAY_SIZE(efikamx_sdhc1_pads));
	gpio_direction_input(EFIKAMX_SDHC1_WP);

	/*
	* Smartbook and Smarttop differ on the location of eSDHC1
	* carrier-detect GPIO
	*/
	if (machine_is_efikamx()) {
	imx_iomux_v3_setup_pad(efikamx_sdhc1_cd_pads[0]);
	gpio_direction_input(EFIKAMX_SDHC1_CD);
	} else if (machine_is_efikasb()) {
	imx_iomux_v3_setup_pad(efikamx_sdhc1_cd_pads[1]);
	gpio_direction_input(EFIKASB_SDHC1_CD);
	}

	esdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
	esdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);

	ret = fsl_esdhc_initialize(bis, &esdhc_cfg[0]);

	if (machine_is_efikasb()) {

	imx_iomux_v3_setup_multiple_pads(efikasb_sdhc2_pads,
	ARRAY_SIZE(efikasb_sdhc2_pads));
	gpio_direction_input(EFIKASB_SDHC2_CD);
	gpio_direction_input(EFIKASB_SDHC2_WP);
	if (!ret)
	ret = fsl_esdhc_initialize(bis, &esdhc_cfg[1]);
	}

	return ret;
	}
	#endif

	/*
	* PATA
	*/
	static iomux_v3_cfg_t const efikamx_pata_pads[] = {
	MX51_PAD_NANDF_WE_B__PATA_DIOW,
	MX51_PAD_NANDF_RE_B__PATA_DIOR,
	MX51_PAD_NANDF_ALE__PATA_BUFFER_EN,
	MX51_PAD_NANDF_CLE__PATA_RESET_B,
	MX51_PAD_NANDF_WP_B__PATA_DMACK,
	MX51_PAD_NANDF_RB0__PATA_DMARQ,
	MX51_PAD_NANDF_RB1__PATA_IORDY,
	MX51_PAD_GPIO_NAND__PATA_INTRQ,
	MX51_PAD_NANDF_CS2__PATA_CS_0,
	MX51_PAD_NANDF_CS3__PATA_CS_1,
	MX51_PAD_NANDF_CS4__PATA_DA_0,
	MX51_PAD_NANDF_CS5__PATA_DA_1,
	MX51_PAD_NANDF_CS6__PATA_DA_2,
	MX51_PAD_NANDF_D15__PATA_DATA15,
	MX51_PAD_NANDF_D14__PATA_DATA14,
	MX51_PAD_NANDF_D13__PATA_DATA13,
	MX51_PAD_NANDF_D12__PATA_DATA12,
	MX51_PAD_NANDF_D11__PATA_DATA11,
	MX51_PAD_NANDF_D10__PATA_DATA10,
	MX51_PAD_NANDF_D9__PATA_DATA9,
	MX51_PAD_NANDF_D8__PATA_DATA8,
	MX51_PAD_NANDF_D7__PATA_DATA7,
	MX51_PAD_NANDF_D6__PATA_DATA6,
	MX51_PAD_NANDF_D5__PATA_DATA5,
	MX51_PAD_NANDF_D4__PATA_DATA4,
	MX51_PAD_NANDF_D3__PATA_DATA3,
	MX51_PAD_NANDF_D2__PATA_DATA2,
	MX51_PAD_NANDF_D1__PATA_DATA1,
	MX51_PAD_NANDF_D0__PATA_DATA0,
	};

	/*
	* EHCI USB
	*/
	#ifdef CONFIG_CMD_USB
	extern void setup_iomux_usb(void);
	#else
	static inline void setup_iomux_usb(void) { }
	#endif

	/*
	* LED configuration
	*
	* Smarttop LED pad config is done in the DCD
	*
	*/
	#define EFIKAMX_LED_BLUE IMX_GPIO_NR(3, 13)
	#define EFIKAMX_LED_GREEN IMX_GPIO_NR(3, 14)
	#define EFIKAMX_LED_RED IMX_GPIO_NR(3, 15)

	static iomux_v3_cfg_t const efikasb_led_pads[] = {
	MX51_PAD_GPIO1_3__GPIO1_3,
	MX51_PAD_EIM_CS0__GPIO2_25,
	};

	#define EFIKASB_CAPSLOCK_LED IMX_GPIO_NR(2, 25)
	#define EFIKASB_MESSAGE_LED IMX_GPIO_NR(1, 3) /* Note: active low */

	/*
	* Board initialization
	*/
	int board_early_init_f(void)
	{
	if (machine_is_efikasb()) {
	imx_iomux_v3_setup_multiple_pads(efikasb_led_pads,
	ARRAY_SIZE(efikasb_led_pads));
	gpio_direction_output(EFIKASB_CAPSLOCK_LED, 0);
	gpio_direction_output(EFIKASB_MESSAGE_LED, 1);
	} else if (machine_is_efikamx()) {
	/*
	* Set up GPIO directions for LEDs.
	* IOMUX has been done in the DCD already.
	* Turn the red LED on for pre-relocation code.
	*/
	gpio_direction_output(EFIKAMX_LED_BLUE, 0);
	gpio_direction_output(EFIKAMX_LED_GREEN, 0);
	gpio_direction_output(EFIKAMX_LED_RED, 1);
	}

	/*
	* Both these pad configurations for UART and SPI are kind of redundant
	* since they are the Power-On Defaults for the i.MX51. But, it seems we
	* should make absolutely sure that they are set up correctly.
	*/
	imx_iomux_v3_setup_multiple_pads(efikamx_uart_pads,
	ARRAY_SIZE(efikamx_uart_pads));
	imx_iomux_v3_setup_multiple_pads(efikamx_spi_pads,
	ARRAY_SIZE(efikamx_spi_pads));

	/* not technically required for U-Boot operation but do it anyway. */
	gpio_direction_input(EFIKAMX_PMIC_IRQ);
	/* Deselect both CS for now, otherwise NOR doesn't probe properly. */
	gpio_direction_output(EFIKAMX_SPI_SS0, 0);
	gpio_direction_output(EFIKAMX_SPI_SS1, 1);

	return 0;
	}

	int board_init(void)
	{
	gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;

	return 0;
	}

	int board_late_init(void)
	{
	if (machine_is_efikamx()) {
	/*
	* Set up Blue LED for "In U-Boot" status.
	* We're all relocated and ready to U-Boot!
	*/
	gpio_set_value(EFIKAMX_LED_RED, 0);
	gpio_set_value(EFIKAMX_LED_GREEN, 0);
	gpio_set_value(EFIKAMX_LED_BLUE, 1);
	}

	power_init();

	imx_iomux_v3_setup_multiple_pads(efikamx_pata_pads,
	ARRAY_SIZE(efikamx_pata_pads));
	setup_iomux_usb();

	return 0;
	}

	int checkboard(void)
	{
	u32 rev = get_efikamx_rev();

	printf("Board: Genesi Efika MX ");
	if (machine_is_efikamx())
	printf("Smarttop (1.%i)\n", rev & 0xf);
	else if (machine_is_efikasb())
	printf("Smartbook\n");

	return 0;
	}