| /* Memory sub-system initialization code */ |
| |
| #include <config.h> |
| #include <version.h> |
| #include <asm/regdef.h> |
| #include <asm/au1x00.h> |
| #include <asm/mipsregs.h> |
| |
| #define AU1500_SYS_ADDR 0xB1900000 |
| #define sys_endian 0x0038 |
| #define CP0_Config0 $16 |
| #define MEM_1MS ((396000000/1000000) * 1000) |
| |
| .text |
| .set noreorder |
| .set mips32 |
| |
| .globl lowlevel_init |
| lowlevel_init: |
| /* |
| * Step 1) Establish CPU endian mode. |
| * NOTE: A fair amount of code is necessary on the Pb1000 to |
| * obtain the value of Switch S8.1 which is used to determine |
| * endian at run-time. |
| */ |
| |
| /* RCE1 */ |
| li t0, MEM_STCFG1 |
| li t1, 0x00000083 |
| sw t1, 0(t0) |
| |
| li t0, MEM_STTIME1 |
| li t1, 0x33030A10 |
| sw t1, 0(t0) |
| |
| li t0, MEM_STADDR1 |
| li t1, 0x11803E40 |
| sw t1, 0(t0) |
| |
| /* Set DSTRB bits so switch will read correctly */ |
| li t1, 0xBE00000C |
| lw t2, 0(t1) |
| or t2, t2, 0x00000300 |
| sw t2, 0(t1) |
| |
| /* Check switch setting */ |
| li t1, 0xBE000014 |
| lw t2, 0(t1) |
| and t2, t2, 0x00000100 |
| bne t2, zero, big_endian |
| nop |
| |
| little_endian: |
| |
| /* Change Au1 core to little endian */ |
| li t0, AU1500_SYS_ADDR |
| li t1, 1 |
| sw t1, sys_endian(t0) |
| mfc0 t2, CP0_CONFIG |
| mtc0 t2, CP0_CONFIG |
| nop |
| nop |
| |
| /* Big Endian is default so nothing to do but fall through */ |
| |
| big_endian: |
| |
| /* |
| * Step 2) Establish Status Register |
| * (set BEV, clear ERL, clear EXL, clear IE) |
| */ |
| li t1, 0x00400000 |
| mtc0 t1, CP0_STATUS |
| |
| /* |
| * Step 3) Establish CP0 Config0 |
| * (set OD, set K0=3) |
| */ |
| li t1, 0x00080003 |
| mtc0 t1, CP0_CONFIG |
| |
| /* |
| * Step 4) Disable Watchpoint facilities |
| */ |
| li t1, 0x00000000 |
| mtc0 t1, CP0_WATCHLO |
| mtc0 t1, CP0_IWATCHLO |
| /* |
| * Step 5) Disable the performance counters |
| */ |
| mtc0 zero, CP0_PERFORMANCE |
| nop |
| |
| /* |
| * Step 6) Establish EJTAG Debug register |
| */ |
| mtc0 zero, CP0_DEBUG |
| nop |
| |
| /* |
| * Step 7) Establish Cause |
| * (set IV bit) |
| */ |
| li t1, 0x00800000 |
| mtc0 t1, CP0_CAUSE |
| |
| /* Establish Wired (and Random) */ |
| mtc0 zero, CP0_WIRED |
| nop |
| |
| /* First setup pll:s to make serial work ok */ |
| /* We have a 12 MHz crystal */ |
| li t0, SYS_CPUPLL |
| li t1, 0x21 /* 396 MHz */ |
| sw t1, 0(t0) |
| sync |
| nop |
| nop |
| |
| /* wait 1mS for clocks to settle */ |
| li t1, MEM_1MS |
| 1: add t1, -1 |
| bne t1, zero, 1b |
| nop |
| /* Setup AUX PLL */ |
| li t0, SYS_AUXPLL |
| li t1, 8 /* 96 MHz */ |
| sw t1, 0(t0) /* aux pll */ |
| sync |
| |
| /* Static memory controller */ |
| |
| /* RCE0 8MB AMD29D323 Flash */ |
| li t0, MEM_STCFG0 |
| li t1, 0x00001403 |
| sw t1, 0(t0) |
| |
| li t0, MEM_STTIME0 |
| li t1, 0xFFFFFFDD |
| sw t1, 0(t0) |
| |
| li t0, MEM_STADDR0 |
| li t1, 0x11F83FE0 |
| sw t1, 0(t0) |
| |
| /* RCE1 CPLD Board Logic */ |
| li t0, MEM_STCFG1 |
| li t1, 0x00000083 |
| sw t1, 0(t0) |
| |
| li t0, MEM_STTIME1 |
| li t1, 0x33030A10 |
| sw t1, 0(t0) |
| |
| li t0, MEM_STADDR1 |
| li t1, 0x11803E40 |
| sw t1, 0(t0) |
| |
| /* RCE2 CPLD Board Logic */ |
| li t0, MEM_STCFG2 |
| li t1, 0x00000004 |
| sw t1, 0(t0) |
| |
| li t0, MEM_STTIME2 |
| li t1, 0x08061908 |
| sw t1, 0(t0) |
| |
| li t0, MEM_STADDR2 |
| li t1, 0x12A03FC0 |
| sw t1, 0(t0) |
| |
| /* RCE3 PCMCIA 250ns */ |
| li t0, MEM_STCFG3 |
| li t1, 0x00000002 |
| sw t1, 0(t0) |
| |
| li t0, MEM_STTIME3 |
| li t1, 0x280E3E07 |
| sw t1, 0(t0) |
| |
| li t0, MEM_STADDR3 |
| li t1, 0x10000000 |
| sw t1, 0(t0) |
| |
| sync |
| |
| /* Set peripherals to a known state */ |
| li t0, IC0_CFG0CLR |
| li t1, 0xFFFFFFFF |
| sw t1, 0(t0) |
| |
| li t0, IC0_CFG0CLR |
| sw t1, 0(t0) |
| |
| li t0, IC0_CFG1CLR |
| sw t1, 0(t0) |
| |
| li t0, IC0_CFG2CLR |
| sw t1, 0(t0) |
| |
| li t0, IC0_SRCSET |
| sw t1, 0(t0) |
| |
| li t0, IC0_ASSIGNSET |
| sw t1, 0(t0) |
| |
| li t0, IC0_WAKECLR |
| sw t1, 0(t0) |
| |
| li t0, IC0_RISINGCLR |
| sw t1, 0(t0) |
| |
| li t0, IC0_FALLINGCLR |
| sw t1, 0(t0) |
| |
| li t0, IC0_TESTBIT |
| li t1, 0x00000000 |
| sw t1, 0(t0) |
| sync |
| |
| li t0, IC1_CFG0CLR |
| li t1, 0xFFFFFFFF |
| sw t1, 0(t0) |
| |
| li t0, IC1_CFG0CLR |
| sw t1, 0(t0) |
| |
| li t0, IC1_CFG1CLR |
| sw t1, 0(t0) |
| |
| li t0, IC1_CFG2CLR |
| sw t1, 0(t0) |
| |
| li t0, IC1_SRCSET |
| sw t1, 0(t0) |
| |
| li t0, IC1_ASSIGNSET |
| sw t1, 0(t0) |
| |
| li t0, IC1_WAKECLR |
| sw t1, 0(t0) |
| |
| li t0, IC1_RISINGCLR |
| sw t1, 0(t0) |
| |
| li t0, IC1_FALLINGCLR |
| sw t1, 0(t0) |
| |
| li t0, IC1_TESTBIT |
| li t1, 0x00000000 |
| sw t1, 0(t0) |
| sync |
| |
| li t0, SYS_FREQCTRL0 |
| li t1, 0x00000000 |
| sw t1, 0(t0) |
| |
| li t0, SYS_FREQCTRL1 |
| li t1, 0x00000000 |
| sw t1, 0(t0) |
| |
| li t0, SYS_CLKSRC |
| li t1, 0x00000000 |
| sw t1, 0(t0) |
| |
| li t0, SYS_PININPUTEN |
| li t1, 0x00000000 |
| sw t1, 0(t0) |
| sync |
| |
| li t0, 0xB1100100 |
| li t1, 0x00000000 |
| sw t1, 0(t0) |
| |
| li t0, 0xB1400100 |
| li t1, 0x00000000 |
| sw t1, 0(t0) |
| |
| |
| li t0, SYS_WAKEMSK |
| li t1, 0x00000000 |
| sw t1, 0(t0) |
| |
| li t0, SYS_WAKESRC |
| li t1, 0x00000000 |
| sw t1, 0(t0) |
| |
| /* wait 1mS before setup */ |
| li t1, MEM_1MS |
| 1: add t1, -1 |
| bne t1, zero, 1b |
| nop |
| |
| /* |
| * Skip memory setup if we are running from memory |
| */ |
| li t0, 0x90000000 |
| sub t0, ra, t0 |
| bltz t0, skip_memsetup |
| nop |
| |
| /* |
| * SDCS0 - Not used, for SMROM |
| * SDCS1 - 32MB Micron 48LCBM16A2 |
| * SDCS2 - 32MB Micron 48LCBM16A2 |
| */ |
| li t0, MEM_SDMODE0 |
| li t1, 0x00000000 |
| sw t1, 0(t0) |
| |
| li t0, MEM_SDMODE1 |
| li t1, 0x00552229 |
| sw t1, 0(t0) |
| |
| li t0, MEM_SDMODE2 |
| li t1, 0x00552229 |
| sw t1, 0(t0) |
| |
| li t0, MEM_SDADDR0 |
| li t1, 0x00000000 |
| sw t1, 0(t0) |
| |
| li t0, MEM_SDADDR1 |
| li t1, 0x001003F8 |
| sw t1, 0(t0) |
| |
| li t0, MEM_SDADDR2 |
| li t1, 0x001023F8 |
| sw t1, 0(t0) |
| |
| sync |
| |
| li t0, MEM_SDREFCFG |
| li t1, 0x74000c30 /* Disable */ |
| sw t1, 0(t0) |
| sync |
| |
| li t0, MEM_SDPRECMD |
| sw zero, 0(t0) |
| sync |
| |
| li t0, MEM_SDAUTOREF |
| sw zero, 0(t0) |
| sync |
| sw zero, 0(t0) |
| sync |
| |
| li t0, MEM_SDREFCFG |
| li t1, 0x76000c30 /* Enable */ |
| sw t1, 0(t0) |
| sync |
| |
| li t0, MEM_SDWRMD0 |
| li t1, 0x00000023 |
| sw t1, 0(t0) |
| sync |
| |
| li t0, MEM_SDWRMD1 |
| li t1, 0x00000023 |
| sw t1, 0(t0) |
| sync |
| |
| li t0, MEM_SDWRMD2 |
| li t1, 0x00000023 |
| sw t1, 0(t0) |
| sync |
| |
| /* wait 1mS after setup */ |
| li t1, MEM_1MS |
| 1: add t1, -1 |
| bne t1, zero, 1b |
| nop |
| |
| skip_memsetup: |
| |
| li t0, SYS_PINFUNC |
| li t1, 0/*0x00008080*/ |
| sw t1, 0(t0) |
| |
| /* |
| li t0, SYS_TRIOUTCLR |
| li t1, 0x00001FFF |
| sw t1, 0(t0) |
| |
| li t0, SYS_OUTPUTCLR |
| li t1, 0x00008000 |
| sw t1, 0(t0) |
| */ |
| sync |
| |
| jr ra |
| nop |