| /* |
| * (C) Copyright 2003-2006 Wolfgang Denk, DENX Software Engineering, |
| * wd@denx.de. |
| * |
| * See file CREDITS for list of people who contributed to this project. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the Free |
| * Software Foundation; either version 2 of the License, or (at your option) |
| * any later version. |
| * |
| * This program is distributed in the hope that it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License |
| * for more details. |
| * |
| * You should have received a copy of the GNU General Public License along |
| * with this program; if not, write to the Free Software Foundation, Inc., 59 |
| * Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| */ |
| |
| #ifndef __CONFIG_H |
| #define __CONFIG_H |
| |
| /* |
| * High Level Configuration Options |
| * (easy to change) |
| */ |
| #define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */ |
| #define CONFIG_MPC5200 1 /* This is an MPC5200 CPU */ |
| #define CONFIG_V38B 1 /* ...on V38B board */ |
| |
| #define CONFIG_SYS_TEXT_BASE 0xFF000000 |
| |
| #define CONFIG_SYS_MPC5XXX_CLKIN 33000000 /* ...running at 33.000000MHz */ |
| |
| #define CONFIG_RTC_PCF8563 1 /* has PCF8563 RTC */ |
| #define CONFIG_MPC5200_DDR 1 /* has DDR SDRAM */ |
| |
| #undef CONFIG_HW_WATCHDOG /* don't use watchdog */ |
| |
| #define CONFIG_NETCONSOLE 1 |
| |
| #define CONFIG_BOARD_EARLY_INIT_R 1 /* do board-specific init */ |
| #define CONFIG_BOARD_EARLY_INIT_F 1 /* do board-specific init */ |
| #define CONFIG_MISC_INIT_R |
| |
| #define CONFIG_SYS_XLB_PIPELINING 1 /* gives better performance */ |
| |
| #define CONFIG_HIGH_BATS 1 /* High BATs supported */ |
| |
| /* |
| * Serial console configuration |
| */ |
| #define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */ |
| #define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */ |
| #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } |
| |
| /* |
| * DDR |
| */ |
| #define SDRAM_DDR 1 /* is DDR */ |
| /* Settings for XLB = 132 MHz */ |
| #define SDRAM_MODE 0x018D0000 |
| #define SDRAM_EMODE 0x40090000 |
| #define SDRAM_CONTROL 0x704f0f00 |
| #define SDRAM_CONFIG1 0x73722930 |
| #define SDRAM_CONFIG2 0x47770000 |
| #define SDRAM_TAPDELAY 0x10000000 |
| |
| /* |
| * PCI - no suport |
| */ |
| #undef CONFIG_PCI |
| |
| /* |
| * Partitions |
| */ |
| #define CONFIG_MAC_PARTITION 1 |
| #define CONFIG_DOS_PARTITION 1 |
| |
| /* |
| * USB |
| */ |
| #define CONFIG_USB_OHCI |
| #define CONFIG_USB_STORAGE |
| #define CONFIG_USB_CLOCK 0x0001BBBB |
| #define CONFIG_USB_CONFIG 0x00001000 |
| |
| |
| /* |
| * BOOTP options |
| */ |
| #define CONFIG_BOOTP_BOOTFILESIZE |
| #define CONFIG_BOOTP_BOOTPATH |
| #define CONFIG_BOOTP_GATEWAY |
| #define CONFIG_BOOTP_HOSTNAME |
| |
| |
| /* |
| * Command line configuration. |
| */ |
| #include <config_cmd_default.h> |
| |
| #define CONFIG_CMD_FAT |
| #define CONFIG_CMD_I2C |
| #define CONFIG_CMD_IDE |
| #define CONFIG_CMD_PING |
| #define CONFIG_CMD_DHCP |
| #define CONFIG_CMD_DIAG |
| #define CONFIG_CMD_IRQ |
| #define CONFIG_CMD_JFFS2 |
| #define CONFIG_CMD_MII |
| #define CONFIG_CMD_SDRAM |
| #define CONFIG_CMD_DATE |
| #define CONFIG_CMD_USB |
| #define CONFIG_CMD_FAT |
| |
| |
| #define CONFIG_TIMESTAMP /* Print image info with timestamp */ |
| |
| /* |
| * Boot low with 16 MB Flash |
| */ |
| #define CONFIG_SYS_LOWBOOT 1 |
| #define CONFIG_SYS_LOWBOOT16 1 |
| |
| /* |
| * Autobooting |
| */ |
| #define CONFIG_BOOTDELAY 3 /* autoboot after 3 seconds */ |
| |
| #define CONFIG_PREBOOT "echo;" \ |
| "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \ |
| "echo" |
| |
| #undef CONFIG_BOOTARGS |
| |
| #define CONFIG_EXTRA_ENV_SETTINGS \ |
| "bootcmd=run net_nfs\0" \ |
| "bootdelay=3\0" \ |
| "baudrate=115200\0" \ |
| "preboot=echo;echo Type \"run flash_nfs\" to mount root " \ |
| "filesystem over NFS; echo\0" \ |
| "netdev=eth0\0" \ |
| "ramargs=setenv bootargs root=/dev/ram rw wdt=off \0" \ |
| "addip=setenv bootargs $(bootargs) " \ |
| "ip=$(ipaddr):$(serverip):$(gatewayip):" \ |
| "$(netmask):$(hostname):$(netdev):off panic=1\0" \ |
| "flash_nfs=run nfsargs addip;bootm $(kernel_addr)\0" \ |
| "flash_self=run ramargs addip;bootm $(kernel_addr) " \ |
| "$(ramdisk_addr)\0" \ |
| "net_nfs=tftp 200000 $(bootfile);run nfsargs addip;bootm\0" \ |
| "nfsargs=setenv bootargs root=/dev/nfs rw " \ |
| "nfsroot=$(serverip):$(rootpath) wdt=off\0" \ |
| "hostname=v38b\0" \ |
| "ethact=FEC\0" \ |
| "rootpath=/opt/eldk-3.1.1/ppc_6xx\0" \ |
| "update=prot off ff000000 ff03ffff; era ff000000 ff03ffff; " \ |
| "cp.b 200000 ff000000 $(filesize);" \ |
| "prot on ff000000 ff03ffff\0" \ |
| "load=tftp 200000 $(u-boot)\0" \ |
| "netmask=255.255.0.0\0" \ |
| "ipaddr=192.168.160.18\0" \ |
| "serverip=192.168.1.1\0" \ |
| "ethaddr=00:e0:ee:00:05:2e\0" \ |
| "bootfile=/tftpboot/v38b/uImage\0" \ |
| "u-boot=/tftpboot/v38b/u-boot.bin\0" \ |
| "" |
| |
| #define CONFIG_BOOTCOMMAND "run net_nfs" |
| |
| /* |
| * IPB Bus clocking configuration. |
| */ |
| #undef CONFIG_SYS_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */ |
| |
| /* |
| * I2C configuration |
| */ |
| #define CONFIG_HARD_I2C 1 /* I2C with hardware support */ |
| #define CONFIG_SYS_I2C_MODULE 2 /* Select I2C module #1 or #2 */ |
| #define CONFIG_SYS_I2C_SPEED 100000 /* 100 kHz */ |
| #define CONFIG_SYS_I2C_SLAVE 0x7F |
| |
| /* |
| * EEPROM configuration |
| */ |
| #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* 1010000x */ |
| #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 |
| #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 |
| #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 70 |
| |
| /* |
| * RTC configuration |
| */ |
| #define CONFIG_SYS_I2C_RTC_ADDR 0x51 |
| |
| /* |
| * Flash configuration - use CFI driver |
| */ |
| #define CONFIG_SYS_FLASH_CFI 1 /* Flash is CFI conformant */ |
| #define CONFIG_FLASH_CFI_DRIVER 1 /* Use the common driver */ |
| #define CONFIG_SYS_FLASH_CFI_AMD_RESET 1 |
| #define CONFIG_SYS_FLASH_BASE 0xFF000000 |
| #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of flash banks */ |
| #define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE } |
| #define CONFIG_SYS_FLASH_SIZE 0x01000000 /* 16 MiB */ |
| #define CONFIG_SYS_MAX_FLASH_SECT 256 /* max num of sects on one chip */ |
| #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* flash write speed-up */ |
| |
| /* |
| * Environment settings |
| */ |
| #define CONFIG_ENV_IS_IN_FLASH 1 |
| #define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x00040000) |
| #define CONFIG_ENV_SIZE 0x10000 |
| #define CONFIG_ENV_SECT_SIZE 0x10000 |
| #define CONFIG_ENV_OVERWRITE 1 |
| |
| /* |
| * Memory map |
| */ |
| #define CONFIG_SYS_MBAR 0xF0000000 |
| #define CONFIG_SYS_SDRAM_BASE 0x00000000 |
| #define CONFIG_SYS_DEFAULT_MBAR 0x80000000 |
| |
| /* Use SRAM until RAM will be available */ |
| #define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM |
| #define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE /* Size of used area in DPRAM */ |
| |
| #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ |
| #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) |
| #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET |
| |
| #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE |
| #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) |
| # define CONFIG_SYS_RAMBOOT 1 |
| #endif |
| |
| #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256kB for Monitor */ |
| #define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128kB for malloc() */ |
| #define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Linux initial memory map */ |
| |
| /* |
| * Ethernet configuration |
| */ |
| #define CONFIG_MPC5xxx_FEC 1 |
| #define CONFIG_MPC5xxx_FEC_MII100 |
| #define CONFIG_PHY_ADDR 0x00 |
| #define CONFIG_MII 1 |
| |
| /* |
| * GPIO configuration |
| */ |
| #define CONFIG_SYS_GPS_PORT_CONFIG 0x90001404 |
| |
| /* |
| * Miscellaneous configurable options |
| */ |
| #define CONFIG_SYS_LONGHELP /* undef to save memory */ |
| #define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ |
| #if defined(CONFIG_CMD_KGDB) |
| #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ |
| #else |
| #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ |
| #endif |
| #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ |
| #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ |
| #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ |
| |
| #define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */ |
| #define CONFIG_SYS_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */ |
| |
| #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ |
| |
| #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ |
| |
| #define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ |
| #if defined(CONFIG_CMD_KGDB) |
| # define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ |
| #endif |
| |
| /* |
| * Various low-level settings |
| */ |
| #define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI |
| #define CONFIG_SYS_HID0_FINAL HID0_ICE |
| |
| #define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE |
| #define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE |
| #define CONFIG_SYS_BOOTCS_CFG 0x00047801 |
| #define CONFIG_SYS_CS0_START CONFIG_SYS_FLASH_BASE |
| #define CONFIG_SYS_CS0_SIZE CONFIG_SYS_FLASH_SIZE |
| |
| #define CONFIG_SYS_CS_BURST 0x00000000 |
| #define CONFIG_SYS_CS_DEADCYCLE 0x33333333 |
| |
| #define CONFIG_SYS_RESET_ADDRESS 0xff000000 |
| |
| /* |
| * IDE/ATA (supports IDE harddisk) |
| */ |
| #undef CONFIG_IDE_8xx_PCCARD /* Don't use IDE with PC Card Adapter */ |
| #undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ |
| #undef CONFIG_IDE_LED /* LED for ide not supported */ |
| |
| #define CONFIG_IDE_RESET /* reset for ide supported */ |
| #define CONFIG_IDE_PREINIT |
| |
| #define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE bus */ |
| #define CONFIG_SYS_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */ |
| |
| #define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000 |
| |
| #define CONFIG_SYS_ATA_BASE_ADDR MPC5XXX_ATA |
| |
| #define CONFIG_SYS_ATA_DATA_OFFSET (0x0060) /* data I/O offset */ |
| |
| #define CONFIG_SYS_ATA_REG_OFFSET (CONFIG_SYS_ATA_DATA_OFFSET) /* normal register accesses offset */ |
| |
| #define CONFIG_SYS_ATA_ALT_OFFSET (0x005C) /* alternate registers offset */ |
| |
| #define CONFIG_SYS_ATA_STRIDE 4 /* Interval between registers */ |
| |
| /* |
| * Status LED |
| */ |
| #define CONFIG_STATUS_LED /* Status LED enabled */ |
| #define CONFIG_BOARD_SPECIFIC_LED /* version has board specific leds */ |
| |
| #define CONFIG_SYS_LED_BASE MPC5XXX_GPT7_ENABLE /* Timer 7 GPIO */ |
| #ifndef __ASSEMBLY__ |
| typedef unsigned int led_id_t; |
| |
| #define __led_toggle(_msk) \ |
| do { \ |
| *((volatile long *) (CONFIG_SYS_LED_BASE)) ^= (_msk); \ |
| } while(0) |
| |
| #define __led_set(_msk, _st) \ |
| do { \ |
| if ((_st)) \ |
| *((volatile long *) (CONFIG_SYS_LED_BASE)) &= ~(_msk); \ |
| else \ |
| *((volatile long *) (CONFIG_SYS_LED_BASE)) |= (_msk); \ |
| } while(0) |
| |
| #define __led_init(_msk, st) \ |
| do { \ |
| *((volatile long *) (CONFIG_SYS_LED_BASE)) |= 0x34; \ |
| } while(0) |
| #endif /* __ASSEMBLY__ */ |
| |
| #endif /* __CONFIG_H */ |