| /* |
| * (C) Copyright 2003 |
| * Wolfgang Denk, DENX Software Engineering, wd@denx.de. |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| #include <common.h> |
| #include <command.h> |
| #include <netdev.h> |
| #include <asm/inca-ip.h> |
| #include <asm/regdef.h> |
| #include <asm/mipsregs.h> |
| #include <asm/io.h> |
| #include <asm/addrspace.h> |
| #include <asm/cacheops.h> |
| #include <asm/reboot.h> |
| |
| #include "sconsole.h" |
| |
| #define cache_unroll(base,op) \ |
| __asm__ __volatile__(" \ |
| .set noreorder; \ |
| .set mips3; \ |
| cache %1, (%0); \ |
| .set mips0; \ |
| .set reorder" \ |
| : \ |
| : "r" (base), \ |
| "i" (op)); |
| |
| typedef void (*FUNCPTR)(ulong *source, ulong *destination, ulong nlongs); |
| |
| extern void asc_serial_init (void); |
| extern void asc_serial_putc (char); |
| extern void asc_serial_puts (const char *); |
| extern int asc_serial_getc (void); |
| extern int asc_serial_tstc (void); |
| extern void asc_serial_setbrg (void); |
| |
| void _machine_restart(void) |
| { |
| void (*f)(void) = (void *) 0xbfc00000; |
| |
| f(); |
| } |
| |
| static void sdram_timing_init (ulong size) |
| { |
| register uint pass; |
| register uint done; |
| register uint count; |
| register uint p0, p1, p2, p3, p4; |
| register uint addr; |
| |
| #define WRITE_MC_IOGP_1 *(uint *)0xbf800800 = (p1<<14)+(p2<<13)+(p4<<8)+(p0<<4)+p3; |
| #define WRITE_MC_IOGP_2 *(uint *)0xbf800800 = (p1<<14)+(p2<<13)+((p4-16)<<8)+(p0<<4)+p3; |
| |
| done = 0; |
| p0 = 2; |
| while (p0 < 4 && done == 0) { |
| p1 = 0; |
| while (p1 < 2 && done == 0) { |
| p2 = 0; |
| while (p2 < 2 && done == 0) { |
| p3 = 0; |
| while (p3 < 16 && done == 0) { |
| count = 0; |
| p4 = 0; |
| while (p4 < 32 && done == 0) { |
| WRITE_MC_IOGP_1; |
| |
| for (addr = CKSEG1 + 0x4000; |
| addr < CKSEG1ADDR (size); |
| addr = addr + 4) { |
| *(uint *) addr = 0xaa55aa55; |
| } |
| |
| pass = 1; |
| |
| for (addr = CKSEG1 + 0x4000; |
| addr < CKSEG1ADDR (size) && pass == 1; |
| addr = addr + 4) { |
| if (*(uint *) addr != 0xaa55aa55) |
| pass = 0; |
| } |
| |
| if (pass == 1) { |
| count++; |
| } else { |
| count = 0; |
| } |
| |
| if (count == 32) { |
| WRITE_MC_IOGP_2; |
| done = 1; |
| } |
| p4++; |
| } |
| p3++; |
| } |
| p2++; |
| } |
| p1++; |
| } |
| p0++; |
| if (p0 == 1) |
| p0++; |
| } |
| } |
| |
| phys_size_t initdram(int board_type) |
| { |
| /* The only supported number of SDRAM banks is 4. |
| */ |
| #define CFG_NB 4 |
| |
| ulong cfgpb0 = *INCA_IP_SDRAM_MC_CFGPB0; |
| ulong cfgdw = *INCA_IP_SDRAM_MC_CFGDW; |
| int cols = cfgpb0 & 0xF; |
| int rows = (cfgpb0 & 0xF0) >> 4; |
| int dw = cfgdw & 0xF; |
| ulong size = (1 << (rows + cols)) * (1 << (dw - 1)) * CFG_NB; |
| void (* sdram_init) (ulong); |
| |
| sdram_init = (void (*)(ulong)) CKSEG0ADDR(&sdram_timing_init); |
| |
| sdram_init(0x10000); |
| |
| return size; |
| } |
| |
| int checkboard (void) |
| { |
| |
| unsigned long chipid = *(unsigned long *)0xB800C800; |
| |
| printf ("Board: Purple PLB 2800 chip version %ld, ", chipid & 0xF); |
| |
| printf("CPU Speed %d MHz\n", CPU_CLOCK_RATE/1000000); |
| |
| set_io_port_base(0); |
| |
| return 0; |
| } |
| |
| int misc_init_r (void) |
| { |
| asc_serial_init (); |
| |
| sconsole_putc = asc_serial_putc; |
| sconsole_puts = asc_serial_puts; |
| sconsole_getc = asc_serial_getc; |
| sconsole_tstc = asc_serial_tstc; |
| sconsole_setbrg = asc_serial_setbrg; |
| |
| sconsole_flush (); |
| return (0); |
| } |
| |
| /******************************************************************************* |
| * |
| * copydwords - copy one buffer to another a long at a time |
| * |
| * This routine copies the first <nlongs> longs from <source> to <destination>. |
| */ |
| static void copydwords (ulong *source, ulong *destination, ulong nlongs) |
| { |
| ulong temp,temp1; |
| ulong *dstend = destination + nlongs; |
| |
| while (destination < dstend) { |
| temp = *source++; |
| /* dummy read from sdram */ |
| temp1 = *(ulong *)0xa0000000; |
| /* avoid optimization from compliler */ |
| *(ulong *)0xbf0081f8 = temp1 + temp; |
| *destination++ = temp; |
| |
| } |
| } |
| |
| /******************************************************************************* |
| * |
| * copyLongs - copy one buffer to another a long at a time |
| * |
| * This routine copies the first <nlongs> longs from <source> to <destination>. |
| */ |
| static void copyLongs (ulong *source, ulong *destination, ulong nlongs) |
| { |
| FUNCPTR absEntry; |
| |
| absEntry = (FUNCPTR)(0xbf008000+((ulong)copydwords & 0x7)); |
| absEntry(source, destination, nlongs); |
| } |
| |
| /******************************************************************************* |
| * |
| * programLoad - load program into ram |
| * |
| * This routine load copydwords into ram |
| * |
| */ |
| static void programLoad(void) |
| { |
| FUNCPTR absEntry; |
| ulong *src,*dst; |
| |
| src = (ulong *)(TEXT_BASE + 0x428); |
| dst = (ulong *)0xbf0081d0; |
| |
| absEntry = (FUNCPTR)(TEXT_BASE + 0x400); |
| absEntry(src,dst,0x6); |
| |
| src = (ulong *)((ulong)copydwords & 0xfffffff8); |
| dst = (ulong *)0xbf008000; |
| |
| absEntry(src,dst,0x38); |
| } |
| |
| /******************************************************************************* |
| * |
| * copy_code - copy u-boot image from flash to RAM |
| * |
| * This routine is needed to solve flash problems on this board |
| * |
| */ |
| void copy_code (ulong dest_addr) |
| { |
| extern long uboot_end_data; |
| unsigned long start; |
| unsigned long end; |
| |
| /* load copydwords into ram |
| */ |
| programLoad(); |
| |
| /* copy u-boot code |
| */ |
| copyLongs((ulong *)CFG_MONITOR_BASE, |
| (ulong *)dest_addr, |
| ((ulong)&uboot_end_data - CFG_MONITOR_BASE + 3) / 4); |
| |
| |
| /* flush caches |
| */ |
| |
| start = CKSEG0; |
| end = start + CFG_DCACHE_SIZE; |
| while(start < end) { |
| cache_unroll(start,Index_Writeback_Inv_D); |
| start += CFG_CACHELINE_SIZE; |
| } |
| |
| start = CKSEG0; |
| end = start + CFG_ICACHE_SIZE; |
| while(start < end) { |
| cache_unroll(start,Index_Invalidate_I); |
| start += CFG_CACHELINE_SIZE; |
| } |
| } |
| |
| #ifdef CONFIG_PLB2800_ETHER |
| int board_eth_init(bd_t *bis) |
| { |
| return plb2800_eth_initialize(bis); |
| } |
| #endif |
| |