blob: 6cf4859967b9c52ba4b3cce43cc838db23406215 [file] [log] [blame]
/*
* Library to support early TI EVM EEPROM handling
*
* Copyright (C) 2015-2016 Texas Instruments Incorporated - http://www.ti.com/
* Lokesh Vutla
* Steve Kipisz
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/omap_common.h>
#include <i2c.h>
#include "board_detect.h"
/**
* ti_i2c_eeprom_init - Initialize an i2c bus and probe for a device
* @i2c_bus: i2c bus number to initialize
* @dev_addr: Device address to probe for
*
* Return: 0 on success or corresponding error on failure.
*/
static int __maybe_unused ti_i2c_eeprom_init(int i2c_bus, int dev_addr)
{
int rc;
if (i2c_bus >= 0) {
rc = i2c_set_bus_num(i2c_bus);
if (rc)
return rc;
}
return i2c_probe(dev_addr);
}
/**
* ti_i2c_eeprom_read - Read data from an EEPROM
* @dev_addr: The device address of the EEPROM
* @offset: Offset to start reading in the EEPROM
* @ep: Pointer to a buffer to read into
* @epsize: Size of buffer
*
* Return: 0 on success or corresponding result of i2c_read
*/
static int __maybe_unused ti_i2c_eeprom_read(int dev_addr, int offset,
uchar *ep, int epsize)
{
return i2c_read(dev_addr, offset, 2, ep, epsize);
}
/**
* ti_eeprom_string_cleanup() - Handle eeprom programming errors
* @s: eeprom string (should be NULL terminated)
*
* Some Board manufacturers do not add a NULL termination at the
* end of string, instead some binary information is kludged in, hence
* convert the string to just printable characters of ASCII chart.
*/
static void __maybe_unused ti_eeprom_string_cleanup(char *s)
{
int i, l;
l = strlen(s);
for (i = 0; i < l; i++, s++)
if (*s < ' ' || *s > '~') {
*s = 0;
break;
}
}
__weak void gpi2c_init(void)
{
}
static int __maybe_unused ti_i2c_eeprom_get(int bus_addr, int dev_addr,
u32 header, u32 size, uint8_t *ep)
{
u32 byte, hdr_read;
int rc;
gpi2c_init();
rc = ti_i2c_eeprom_init(bus_addr, dev_addr);
if (rc)
return rc;
/*
* Read the header first then only read the other contents.
*/
byte = 2;
rc = i2c_read(dev_addr, 0x0, byte, (uint8_t *)&hdr_read, 4);
if (rc)
return rc;
/* Corrupted data??? */
if (hdr_read != header) {
rc = i2c_read(dev_addr, 0x0, byte, (uint8_t *)&hdr_read, 4);
/*
* read the eeprom header using i2c again, but use only a
* 1 byte address (some legacy boards need this..)
*/
byte = 1;
if (rc)
rc = i2c_read(dev_addr, 0x0, byte, (uint8_t *)&hdr_read,
4);
if (rc)
return rc;
}
if (hdr_read != header)
return -1;
rc = i2c_read(dev_addr, 0x0, byte, ep, size);
if (rc)
return rc;
return 0;
}
int __maybe_unused ti_i2c_eeprom_am_get(int bus_addr, int dev_addr)
{
int rc;
struct ti_am_eeprom am_ep;
struct ti_common_eeprom *ep;
ep = TI_EEPROM_DATA;
if (ep->header == TI_EEPROM_HEADER_MAGIC)
goto already_read;
/* Initialize with a known bad marker for i2c fails.. */
ep->header = TI_DEAD_EEPROM_MAGIC;
ep->name[0] = 0x0;
ep->version[0] = 0x0;
ep->serial[0] = 0x0;
rc = ti_i2c_eeprom_get(bus_addr, dev_addr, TI_EEPROM_HEADER_MAGIC,
sizeof(am_ep), (uint8_t *)&am_ep);
if (rc)
return rc;
ep->header = am_ep.header;
strlcpy(ep->name, am_ep.name, TI_EEPROM_HDR_NAME_LEN + 1);
ti_eeprom_string_cleanup(ep->name);
/* BeagleBone Green '1' eeprom, board_rev: 0x1a 0x00 0x00 0x00 */
if (am_ep.version[0] == 0x1a && am_ep.version[1] == 0x00 &&
am_ep.version[2] == 0x00 && am_ep.version[3] == 0x00)
strlcpy(ep->version, "BBG1", TI_EEPROM_HDR_REV_LEN + 1);
else
strlcpy(ep->version, am_ep.version, TI_EEPROM_HDR_REV_LEN + 1);
ti_eeprom_string_cleanup(ep->version);
strlcpy(ep->serial, am_ep.serial, TI_EEPROM_HDR_SERIAL_LEN + 1);
ti_eeprom_string_cleanup(ep->serial);
strlcpy(ep->config, am_ep.config, TI_EEPROM_HDR_CONFIG_LEN + 1);
ti_eeprom_string_cleanup(ep->config);
memcpy(ep->mac_addr, am_ep.mac_addr,
TI_EEPROM_HDR_NO_OF_MAC_ADDR * TI_EEPROM_HDR_ETH_ALEN);
already_read:
return 0;
}
bool __maybe_unused board_ti_is(char *name_tag)
{
struct ti_common_eeprom *ep = TI_EEPROM_DATA;
if (ep->header == TI_DEAD_EEPROM_MAGIC)
return false;
return !strncmp(ep->name, name_tag, TI_EEPROM_HDR_NAME_LEN);
}
bool __maybe_unused board_ti_rev_is(char *rev_tag, int cmp_len)
{
struct ti_common_eeprom *ep = TI_EEPROM_DATA;
int l;
if (ep->header == TI_DEAD_EEPROM_MAGIC)
return false;
l = cmp_len > TI_EEPROM_HDR_REV_LEN ? TI_EEPROM_HDR_REV_LEN : cmp_len;
return !strncmp(ep->version, rev_tag, l);
}
char * __maybe_unused board_ti_get_rev(void)
{
struct ti_common_eeprom *ep = TI_EEPROM_DATA;
if (ep->header == TI_DEAD_EEPROM_MAGIC)
return NULL;
return ep->version;
}
char * __maybe_unused board_ti_get_config(void)
{
struct ti_common_eeprom *ep = TI_EEPROM_DATA;
if (ep->header == TI_DEAD_EEPROM_MAGIC)
return NULL;
return ep->config;
}
char * __maybe_unused board_ti_get_name(void)
{
struct ti_common_eeprom *ep = TI_EEPROM_DATA;
if (ep->header == TI_DEAD_EEPROM_MAGIC)
return NULL;
return ep->name;
}
void __maybe_unused
board_ti_get_eth_mac_addr(int index,
u8 mac_addr[TI_EEPROM_HDR_ETH_ALEN])
{
struct ti_common_eeprom *ep = TI_EEPROM_DATA;
if (ep->header == TI_DEAD_EEPROM_MAGIC)
goto fail;
if (index < 0 || index >= TI_EEPROM_HDR_NO_OF_MAC_ADDR)
goto fail;
memcpy(mac_addr, ep->mac_addr[index], TI_EEPROM_HDR_ETH_ALEN);
return;
fail:
memset(mac_addr, 0, TI_EEPROM_HDR_ETH_ALEN);
}
void __maybe_unused set_board_info_env(char *name)
{
char *unknown = "unknown";
struct ti_common_eeprom *ep = TI_EEPROM_DATA;
if (name)
setenv("board_name", name);
else if (ep->name)
setenv("board_name", ep->name);
else
setenv("board_name", unknown);
if (ep->version)
setenv("board_rev", ep->version);
else
setenv("board_rev", unknown);
if (ep->serial)
setenv("board_serial", ep->serial);
else
setenv("board_serial", unknown);
}