blob: 43e7f2888a525a578bfbd361a060a56056bc4997 [file] [log] [blame]
/*
* Copyright 2011-2012 Freescale Semiconductor, Inc.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <command.h>
#include <netdev.h>
#include <linux/compiler.h>
#include <asm/mmu.h>
#include <asm/processor.h>
#include <asm/cache.h>
#include <asm/immap_85xx.h>
#include <asm/fsl_law.h>
#include <asm/fsl_serdes.h>
#include <asm/fsl_portals.h>
#include <asm/fsl_liodn.h>
#include <fm_eth.h>
#include <configs/P3060QDS.h>
#include <libfdt.h>
#include <fdt_support.h>
#include "../common/qixis.h"
#include "p3060qds.h"
#include "p3060qds_qixis.h"
DECLARE_GLOBAL_DATA_PTR;
int checkboard(void)
{
u8 sw;
struct cpu_type *cpu = gd->cpu;
ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
unsigned int i;
printf("Board: %s", cpu->name);
puts("QDS, ");
printf("Sys ID: 0x%02x, Sys Ver: 0x%02x, FPGA Ver: 0x%02x, ",
QIXIS_READ(id), QIXIS_READ(arch), QIXIS_READ(scver));
sw = QIXIS_READ(brdcfg[0]);
sw = (sw & QIXIS_LBMAP_MASK) >> QIXIS_LBMAP_SHIFT;
if (sw < 0x8)
printf("vBank: %d\n", sw);
else if (sw == 0x8)
puts("Promjet\n");
else if (sw == 0x9)
puts("NAND\n");
else
printf("invalid setting of SW%u\n", PIXIS_LBMAP_SWITCH);
puts("Reset Configuration Word (RCW):");
for (i = 0; i < ARRAY_SIZE(gur->rcwsr); i++) {
u32 rcw = in_be32(&gur->rcwsr[i]);
if ((i % 4) == 0)
printf("\n %08x:", i * 4);
printf(" %08x", rcw);
}
puts("\n");
puts("SERDES Reference Clocks: ");
sw = QIXIS_READ(brdcfg[2]);
for (i = 0; i < 3; i++) {
static const char * const freq[] = {"100", "125", "Reserved",
"156.25"};
unsigned int clock = (sw >> (2 * i)) & 3;
printf("Bank%u=%sMhz ", i+1, freq[clock]);
}
puts("\n");
return 0;
}
int board_early_init_f(void)
{
ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
/* only single DDR controller on QDS board, disable DDR1_MCK4/5 */
setbits_be32(&gur->ddrclkdr, 0x00030000);
return 0;
}
void board_config_serdes_mux(void)
{
ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
int cfg = (in_be32(&gur->rcwsr[4]) &
FSL_CORENET_RCWSR4_SRDS_PRTCL) >> 26;
switch (cfg) {
case 0x03:
case 0x06:
/* set Lane I,J as SGMII */
QIXIS_WRITE(brdcfg[6], BRDCFG6_SD4MX_B | BRDCFG6_SD3MX_A |
BRDCFG6_SD2MX_B | BRDCFG6_SD1MX_A);
break;
case 0x16:
case 0x19:
case 0x1c:
/* set Lane I,J as Aurora Debug */
QIXIS_WRITE(brdcfg[6], BRDCFG6_SD4MX_A | BRDCFG6_SD3MX_B |
BRDCFG6_SD2MX_A | BRDCFG6_SD1MX_B);
break;
default:
puts("Invalid SerDes protocol for P3060QDS\n");
break;
}
}
void board_config_usb_mux(void)
{
u8 brdcfg4, brdcfg5, brdcfg7;
ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
u32 rcwsr11 = in_be32(&gur->rcwsr[11]);
u32 ec1 = rcwsr11 & FSL_CORENET_RCWSR11_EC1;
u32 ec2 = rcwsr11 & FSL_CORENET_RCWSR11_EC2;
brdcfg4 = QIXIS_READ(brdcfg[4]);
brdcfg4 &= ~BRDCFG4_EC_MODE_MASK;
if ((ec1 == FSL_CORENET_RCWSR11_EC1_FM1_USB1) &&
(ec2 == FSL_CORENET_RCWSR11_EC2_USB2)) {
brdcfg4 |= BRDCFG4_EC2_USB_EC1_USB;
} else if ((ec1 == FSL_CORENET_RCWSR11_EC1_FM1_USB1) &&
((ec2 == FSL_CORENET_RCWSR11_EC2_FM1_DTSEC2) ||
(ec2 == FSL_CORENET_RCWSR11_EC2_FM2_DTSEC1))) {
brdcfg4 |= BRDCFG4_EC2_RGMII_EC1_USB;
} else if ((ec1 == FSL_CORENET_RCWSR11_EC1_FM1_DTSEC1) &&
(ec2 == FSL_CORENET_RCWSR11_EC2_USB2)) {
brdcfg4 |= BRDCFG4_EC2_USB_EC1_RGMII;
} else if ((ec1 == FSL_CORENET_RCWSR11_EC1_FM1_DTSEC1) &&
((ec2 == FSL_CORENET_RCWSR11_EC2_FM1_DTSEC2) ||
(ec2 == FSL_CORENET_RCWSR11_EC2_FM2_DTSEC1))) {
brdcfg4 |= BRDCFG4_EC2_RGMII_EC1_RGMII;
} else {
brdcfg4 |= BRDCFG4_EC2_MII_EC1_MII;
}
QIXIS_WRITE(brdcfg[4], brdcfg4);
brdcfg5 = QIXIS_READ(brdcfg[5]);
brdcfg5 &= ~(BRDCFG5_USB1ID_MASK | BRDCFG5_USB2ID_MASK);
brdcfg5 |= (BRDCFG5_USB1ID_CTRL | BRDCFG5_USB2ID_CTRL);
QIXIS_WRITE(brdcfg[5], brdcfg5);
brdcfg7 = BRDCFG7_JTAGMX_COP_JTAG | BRDCFG7_IQ1MX_IRQ_EVT |
BRDCFG7_G1MX_USB1 | BRDCFG7_D1MX_TSEC3USB | BRDCFG7_I3MX_USB1;
QIXIS_WRITE(brdcfg[7], brdcfg7);
}
int board_early_init_r(void)
{
const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
const u8 flash_esel = find_tlb_idx((void *)flashbase, 1);
/*
* Remap Boot flash + PROMJET region to caching-inhibited
* so that flash can be erased properly.
*/
/* Flush d-cache and invalidate i-cache of any FLASH data */
flush_dcache();
invalidate_icache();
/* invalidate existing TLB entry for flash + promjet */
disable_tlb(flash_esel);
set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
0, flash_esel, BOOKE_PAGESZ_256M, 1);
set_liodns();
#ifdef CONFIG_SYS_DPAA_QBMAN
setup_portals();
#endif
board_config_serdes_mux();
board_config_usb_mux();
return 0;
}
static const char *serdes_clock_to_string(u32 clock)
{
switch (clock) {
case SRDS_PLLCR0_RFCK_SEL_100:
return "100";
case SRDS_PLLCR0_RFCK_SEL_125:
return "125";
case SRDS_PLLCR0_RFCK_SEL_156_25:
return "156.25";
default:
return "150";
}
}
#define NUM_SRDS_BANKS 3
int misc_init_r(void)
{
serdes_corenet_t *srds_regs;
u32 actual[NUM_SRDS_BANKS];
unsigned int i;
u8 sw;
sw = QIXIS_READ(brdcfg[2]);
for (i = 0; i < 3; i++) {
unsigned int clock = (sw >> (2 * i)) & 3;
switch (clock) {
case 0:
actual[i] = SRDS_PLLCR0_RFCK_SEL_100;
break;
case 1:
actual[i] = SRDS_PLLCR0_RFCK_SEL_125;
break;
case 3:
actual[i] = SRDS_PLLCR0_RFCK_SEL_156_25;
break;
default:
printf("Warning: SDREFCLK%u switch setting of '10' is "
"unsupported\n", i + 1);
break;
}
}
srds_regs = (void *)CONFIG_SYS_FSL_CORENET_SERDES_ADDR;
for (i = 0; i < NUM_SRDS_BANKS; i++) {
u32 pllcr0 = in_be32(&srds_regs->bank[i].pllcr0);
u32 expected = pllcr0 & SRDS_PLLCR0_RFCK_SEL_MASK;
if (expected != actual[i]) {
printf("Warning: SERDES bank %u expects reference clock"
" %sMHz, but actual is %sMHz\n", i + 1,
serdes_clock_to_string(expected),
serdes_clock_to_string(actual[i]));
}
}
return 0;
}
/*
* This is map of CVDD values. 33 means CVDD is 3.3v, 25 means CVDD is 2.5v,
* 18 means CVDD is 1.8v.
*/
static u8 IO_VSEL[] = {
33, 33, 33, 25, 25, 25, 18, 18, 18,
33, 33, 33, 25, 25, 25, 18, 18, 18,
33, 33, 33, 25, 25, 25, 18, 18, 18,
33, 33, 33, 33, 33
};
#define IO_VSEL_MASK 0x1f
/*
* different CVDD selects diffenert spi flashs, read dutcfg[3] to get CVDD,
* then set status of spi flash nodes to 'disabled' according to CVDD.
* CVDD '33' will select spi flash0 and flash1, CVDD '25' will select spi
* flash2, CVDD '18' will select spi flash3.
*/
void fdt_fixup_board_spi(void *blob)
{
u8 sw5 = QIXIS_READ(dutcfg[3]);
switch (IO_VSEL[sw5 & IO_VSEL_MASK]) {
/* 3.3v */
case 33:
do_fixup_by_compat(blob, "atmel,at45db081d", "status",
"disabled", strlen("disabled") + 1, 1);
do_fixup_by_compat(blob, "spansion,sst25wf040", "status",
"disabled", strlen("disabled") + 1, 1);
break;
/* 2.5v */
case 25:
do_fixup_by_compat(blob, "spansion,s25sl12801", "status",
"disabled", strlen("disabled") + 1, 1);
do_fixup_by_compat(blob, "spansion,en25q32", "status",
"disabled", strlen("disabled") + 1, 1);
do_fixup_by_compat(blob, "spansion,sst25wf040", "status",
"disabled", strlen("disabled") + 1, 1);
break;
/* 1.8v */
case 18:
do_fixup_by_compat(blob, "spansion,s25sl12801", "status",
"disabled", strlen("disabled") + 1, 1);
do_fixup_by_compat(blob, "spansion,en25q32", "status",
"disabled", strlen("disabled") + 1, 1);
do_fixup_by_compat(blob, "atmel,at45db081d", "status",
"disabled", strlen("disabled") + 1, 1);
break;
}
}
void ft_board_setup(void *blob, bd_t *bd)
{
phys_addr_t base;
phys_size_t size;
ft_cpu_setup(blob, bd);
base = getenv_bootm_low();
size = getenv_bootm_size();
fdt_fixup_memory(blob, (u64)base, (u64)size);
#if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB)
fdt_fixup_dr_usb(blob, bd);
#endif
#ifdef CONFIG_PCI
pci_of_setup(blob, bd);
#endif
fdt_fixup_liodn(blob);
fdt_fixup_dr_usb(blob, bd);
fdt_fixup_board_spi(blob);
#ifdef CONFIG_SYS_DPAA_FMAN
fdt_fixup_fman_ethernet(blob);
fdt_fixup_board_enet(blob);
#endif
}