drivers/net/octeon/octeon_mdio.c - github/trini/u-boot - Gitiles

 // SPDX-License-Identifier:    GPL-2.0
 /*
  * Copyright (C) 2018-2022 Marvell International Ltd.
  */

 #include <dm.h>
 #include <fdt_support.h>
 #include <log.h>
 #include <miiphy.h>
 #include <net.h>
 #include <linux/delay.h>

 #include <mach/cvmx-regs.h>
 #include <mach/cvmx-csr.h>
 #include <mach/octeon-model.h>
 #include <mach/octeon-feature.h>
 #include <mach/cvmx-smix-defs.h>
 #include <mach/cvmx-config.h>
 #include <mach/cvmx-helper.h>
 #include <mach/cvmx-helper-board.h>
 #include <mach/cvmx-mdio.h>

 #define CVMX_SMI_DRV_CTL   0x0001180000001828ull
 #define DEFAULT_MDIO_SPEED 2500000 /** 2.5 MHz default speed */

 /**
  * cvmx_smi_drv_ctl
  *
  * Enables the SMI interface.
  *
  */
 union cvmx_smi_drv_ctl {
 	u64 u64;
 	struct cvmx_smi_drv_ctl_s {
 		u64 reserved_14_63 : 50;
 		u64 pctl : 6;
 		u64 reserved_6_7 : 2;
 		u64 nctl : 6;
 	} s;
 };

 struct octeon_mdiobus {
 	struct mii_dev *mii_dev;
 	/**
 	 * The local bus is in the lower 8 bits, followed by the remote bus in
 	 * the top 8 bits.  Bit 16 will be set if the bus is non-local.
 	 */
 	u32 bus_id;

 	int node;     /** Node number */
 	int speed;    /** Bus speed, normally 2.5 MHz */
 	int fdt_node; /** Node in FDT */
 	bool local;   /** true if local MDIO bus */
 };

 static int octeon_mdio_read(struct udevice *mdio_dev, int phy_addr,
 			    int dev_addr, int reg_addr)
 {
 	struct octeon_mdiobus *p = dev_get_priv(mdio_dev);
 	struct mii_dev *dev = p->mii_dev;
 	int value;

 	debug("%s(0x%p(%s): bus_id=%d phy_addr=%d, 0x%x, 0x%x) - ", __func__,
 	      dev, dev->name, p->bus_id, phy_addr, dev_addr, reg_addr);
 	if (IS_ENABLED(CONFIG_PHYLIB_10G) && dev_addr != MDIO_DEVAD_NONE) {
 		debug("clause 45 mode\n");
 		value = cvmx_mdio_45_read(p->bus_id & 0xff, phy_addr, dev_addr,
 					  reg_addr);
 	} else {
 		value = cvmx_mdio_read(p->bus_id & 0xff, phy_addr, reg_addr);
 	}

 	debug("Return value: 0x%x\n", value);
 	return value;
 }

 static int octeon_mdio_write(struct udevice *mdio_dev, int phy_addr,
 			     int dev_addr, int reg_addr, u16 value)
 {
 	struct octeon_mdiobus *p = dev_get_priv(mdio_dev);
 	struct mii_dev *dev = p->mii_dev;

 	debug("%s(0x%p(%s): bus_id=%d phy_addr=%d, 0x%x, 0x%x, 0x%x)\n",
 	      __func__, dev, dev->name, p->bus_id, phy_addr, dev_addr, reg_addr,
 	      value);

 	if (IS_ENABLED(CONFIG_PHYLIB_10G) && dev_addr != MDIO_DEVAD_NONE) {
 		debug("clause 45 mode\n");
 		return cvmx_mdio_45_write(p->bus_id & 0xff, phy_addr, dev_addr,
 					  reg_addr, value);
 	}

 	return cvmx_mdio_write(p->bus_id & 0xff, phy_addr, reg_addr, value);
 }

 /**
  * Converts a MDIO register address to a bus number
  *
  * @param reg_addr	MDIO base register address
  *
  * @return	MDIO bus number or -1 if invalid address
  */
 int octeon_mdio_reg_addr_to_bus(u64 reg_addr)
 {
 	int bus_base;
 	int bus;

 	/* Adjust the bus number based on the node number */
 	bus_base = cvmx_csr_addr_to_node(reg_addr) * 4;
 	reg_addr = cvmx_csr_addr_strip_node(reg_addr);

 	switch (reg_addr) {
 	case 0x1180000001800:
 	case 0x1180000003800: /* 68XX/78XX address */
 		bus = 0;
 		break;
 	case 0x1180000001900:
 	case 0x1180000003880:
 		bus = 1;
 		break;
 	case 0x1180000003900:
 		bus = 2;
 		break;
 	case 0x1180000003980:
 		bus = 3;
 		break;
 	default:
 		printf("%s: Unknown register address 0x%llx\n", __func__,
 		       reg_addr);
 		return -1;
 	}
 	bus += bus_base;
 	debug("%s: address 0x%llx is bus %d\n", __func__, reg_addr, bus);
 	return bus;
 }

 static int octeon_mdio_probe(struct udevice *dev)
 {
 	struct octeon_mdiobus *p = dev_get_priv(dev);
 	union cvmx_smi_drv_ctl drv_ctl;
 	cvmx_smix_clk_t smi_clk;
 	u64 mdio_addr;
 	int bus;
 	u64 sclock;
 	u32 sample_dly;
 	u64 denom;

 	mdio_addr = dev_read_addr(dev);
 	debug("%s: Translated address: 0x%llx\n", __func__, mdio_addr);
 	bus = octeon_mdio_reg_addr_to_bus(mdio_addr);
 	p->bus_id = bus;
 	debug("%s: bus: %d\n", __func__, bus);

 	drv_ctl.u64 = csr_rd(CVMX_SMI_DRV_CTL);
 	drv_ctl.s.pctl = dev_read_u32_default(dev, "cavium,pctl-drive-strength",
 					      drv_ctl.s.pctl);
 	drv_ctl.s.nctl = dev_read_u32_default(dev, "cavium,nctl-drive-strength",
 					      drv_ctl.s.nctl);
 	debug("%s: Set MDIO PCTL drive strength to 0x%x and NCTL drive strength to 0x%x\n",
 	      __func__, drv_ctl.s.pctl, drv_ctl.s.nctl);
 	csr_wr(CVMX_SMI_DRV_CTL, drv_ctl.u64);

 	/* Set the bus speed, default is 2.5MHz */
 	p->speed = dev_read_u32_default(dev, "cavium,max-speed",
 					DEFAULT_MDIO_SPEED);
 	sclock = gd->bus_clk;
 	smi_clk.u64 = csr_rd(CVMX_SMIX_CLK(bus & 3));
 	smi_clk.s.phase = sclock / (p->speed * 2);

 	/* Allow sample delay to be specified */
 	sample_dly = dev_read_u32_default(dev, "cavium,sample-delay", 0);
 	/* Only change the sample delay if it is set, otherwise use
 	 * the default value of 2.
 	 */
 	if (sample_dly) {
 		u32 sample;

 		denom = (sclock * 1000ULL) / sample_dly;
 		debug("%s: sclock: %llu, sample_dly: %u ps, denom: %llu\n",
 		      __func__, sclock, sample_dly, denom);
 		sample = (sclock + denom - 1) / denom;
 		debug("%s: sample: %u\n", __func__, smi_clk.s.sample);
 		if (sample < 2) {
 			printf("%s: warning: cavium,sample-delay %u ps is too small in device tree for %s\n",
 			       __func__, sample_dly, dev->name);
 			sample = 2;
 		}
 		if (sample > (2 * smi_clk.s.phase - 3)) {
 			printf("%s: warning: cavium,sample-delay %u ps is too large in device tree for %s\n",
 			       __func__, sample_dly, dev->name);
 			sample = 2 * smi_clk.s.phase - 3;
 		}
 		smi_clk.s.sample = sample & 0xf;
 		smi_clk.s.sample_hi = (sample >> 4) & 0xf;
 		debug("%s(%s): sample delay: %u ps (%d clocks)\n", __func__,
 		      dev->name, sample_dly, smi_clk.s.sample);
 	}
 	csr_wr(CVMX_SMIX_CLK(bus & 3), smi_clk.u64);

 	debug("mdio clock phase: %d clocks\n", smi_clk.s.phase);
 	csr_wr(CVMX_SMIX_CLK(bus & 3), smi_clk.u64);
 	debug("Enabling SMI interface %s\n", dev->name);
 	csr_wr(CVMX_SMIX_EN(bus & 3), 1);

 	/* Muxed MDIO bus support removed for now! */
 	return 0;
 }

 static const struct mdio_ops octeon_mdio_ops = {
 	.read = octeon_mdio_read,
 	.write = octeon_mdio_write,
 };

 static const struct udevice_id octeon_mdio_ids[] = {
 	{ .compatible = "cavium,octeon-3860-mdio" },
 	{}
 };

 U_BOOT_DRIVER(octeon_mdio) = {
 	.name = "octeon_mdio",
 	.id = UCLASS_MDIO,
 	.of_match = octeon_mdio_ids,
 	.probe = octeon_mdio_probe,
 	.ops = &octeon_mdio_ops,
 	.priv_auto = sizeof(struct octeon_mdiobus),
 };
	// SPDX-License-Identifier: GPL-2.0
	/*
	* Copyright (C) 2018-2022 Marvell International Ltd.
	*/

	#include <dm.h>
	#include <fdt_support.h>
	#include <log.h>
	#include <miiphy.h>
	#include <net.h>
	#include <linux/delay.h>

	#include <mach/cvmx-regs.h>
	#include <mach/cvmx-csr.h>
	#include <mach/octeon-model.h>
	#include <mach/octeon-feature.h>
	#include <mach/cvmx-smix-defs.h>
	#include <mach/cvmx-config.h>
	#include <mach/cvmx-helper.h>
	#include <mach/cvmx-helper-board.h>
	#include <mach/cvmx-mdio.h>

	#define CVMX_SMI_DRV_CTL 0x0001180000001828ull
	#define DEFAULT_MDIO_SPEED 2500000 /** 2.5 MHz default speed */

	/**
	* cvmx_smi_drv_ctl
	*
	* Enables the SMI interface.
	*
	*/
	union cvmx_smi_drv_ctl {
	u64 u64;
	struct cvmx_smi_drv_ctl_s {
	u64 reserved_14_63 : 50;
	u64 pctl : 6;
	u64 reserved_6_7 : 2;
	u64 nctl : 6;
	} s;
	};

	struct octeon_mdiobus {
	struct mii_dev *mii_dev;
	/**
	* The local bus is in the lower 8 bits, followed by the remote bus in
	* the top 8 bits. Bit 16 will be set if the bus is non-local.
	*/
	u32 bus_id;

	int node; /** Node number */
	int speed; /** Bus speed, normally 2.5 MHz */
	int fdt_node; /** Node in FDT */
	bool local; /** true if local MDIO bus */
	};

	static int octeon_mdio_read(struct udevice *mdio_dev, int phy_addr,
	int dev_addr, int reg_addr)
	{
	struct octeon_mdiobus *p = dev_get_priv(mdio_dev);
	struct mii_dev *dev = p->mii_dev;
	int value;

	debug("%s(0x%p(%s): bus_id=%d phy_addr=%d, 0x%x, 0x%x) - ", __func__,
	dev, dev->name, p->bus_id, phy_addr, dev_addr, reg_addr);
	if (IS_ENABLED(CONFIG_PHYLIB_10G) && dev_addr != MDIO_DEVAD_NONE) {
	debug("clause 45 mode\n");
	value = cvmx_mdio_45_read(p->bus_id & 0xff, phy_addr, dev_addr,
	reg_addr);
	} else {
	value = cvmx_mdio_read(p->bus_id & 0xff, phy_addr, reg_addr);
	}

	debug("Return value: 0x%x\n", value);
	return value;
	}

	static int octeon_mdio_write(struct udevice *mdio_dev, int phy_addr,
	int dev_addr, int reg_addr, u16 value)
	{
	struct octeon_mdiobus *p = dev_get_priv(mdio_dev);
	struct mii_dev *dev = p->mii_dev;

	debug("%s(0x%p(%s): bus_id=%d phy_addr=%d, 0x%x, 0x%x, 0x%x)\n",
	__func__, dev, dev->name, p->bus_id, phy_addr, dev_addr, reg_addr,
	value);

	if (IS_ENABLED(CONFIG_PHYLIB_10G) && dev_addr != MDIO_DEVAD_NONE) {
	debug("clause 45 mode\n");
	return cvmx_mdio_45_write(p->bus_id & 0xff, phy_addr, dev_addr,
	reg_addr, value);
	}

	return cvmx_mdio_write(p->bus_id & 0xff, phy_addr, reg_addr, value);
	}

	/**
	* Converts a MDIO register address to a bus number
	*
	* @param reg_addr MDIO base register address
	*
	* @return MDIO bus number or -1 if invalid address
	*/
	int octeon_mdio_reg_addr_to_bus(u64 reg_addr)
	{
	int bus_base;
	int bus;

	/* Adjust the bus number based on the node number */
	bus_base = cvmx_csr_addr_to_node(reg_addr) * 4;
	reg_addr = cvmx_csr_addr_strip_node(reg_addr);

	switch (reg_addr) {
	case 0x1180000001800:
	case 0x1180000003800: /* 68XX/78XX address */
	bus = 0;
	break;
	case 0x1180000001900:
	case 0x1180000003880:
	bus = 1;
	break;
	case 0x1180000003900:
	bus = 2;
	break;
	case 0x1180000003980:
	bus = 3;
	break;
	default:
	printf("%s: Unknown register address 0x%llx\n", __func__,
	reg_addr);
	return -1;
	}
	bus += bus_base;
	debug("%s: address 0x%llx is bus %d\n", __func__, reg_addr, bus);
	return bus;
	}

	static int octeon_mdio_probe(struct udevice *dev)
	{
	struct octeon_mdiobus *p = dev_get_priv(dev);
	union cvmx_smi_drv_ctl drv_ctl;
	cvmx_smix_clk_t smi_clk;
	u64 mdio_addr;
	int bus;
	u64 sclock;
	u32 sample_dly;
	u64 denom;

	mdio_addr = dev_read_addr(dev);
	debug("%s: Translated address: 0x%llx\n", __func__, mdio_addr);
	bus = octeon_mdio_reg_addr_to_bus(mdio_addr);
	p->bus_id = bus;
	debug("%s: bus: %d\n", __func__, bus);

	drv_ctl.u64 = csr_rd(CVMX_SMI_DRV_CTL);
	drv_ctl.s.pctl = dev_read_u32_default(dev, "cavium,pctl-drive-strength",
	drv_ctl.s.pctl);
	drv_ctl.s.nctl = dev_read_u32_default(dev, "cavium,nctl-drive-strength",
	drv_ctl.s.nctl);
	debug("%s: Set MDIO PCTL drive strength to 0x%x and NCTL drive strength to 0x%x\n",
	__func__, drv_ctl.s.pctl, drv_ctl.s.nctl);
	csr_wr(CVMX_SMI_DRV_CTL, drv_ctl.u64);

	/* Set the bus speed, default is 2.5MHz */
	p->speed = dev_read_u32_default(dev, "cavium,max-speed",
	DEFAULT_MDIO_SPEED);
	sclock = gd->bus_clk;
	smi_clk.u64 = csr_rd(CVMX_SMIX_CLK(bus & 3));
	smi_clk.s.phase = sclock / (p->speed * 2);

	/* Allow sample delay to be specified */
	sample_dly = dev_read_u32_default(dev, "cavium,sample-delay", 0);
	/* Only change the sample delay if it is set, otherwise use
	* the default value of 2.
	*/
	if (sample_dly) {
	u32 sample;

	denom = (sclock * 1000ULL) / sample_dly;
	debug("%s: sclock: %llu, sample_dly: %u ps, denom: %llu\n",
	__func__, sclock, sample_dly, denom);
	sample = (sclock + denom - 1) / denom;
	debug("%s: sample: %u\n", __func__, smi_clk.s.sample);
	if (sample < 2) {
	printf("%s: warning: cavium,sample-delay %u ps is too small in device tree for %s\n",
	__func__, sample_dly, dev->name);
	sample = 2;
	}
	if (sample > (2 * smi_clk.s.phase - 3)) {
	printf("%s: warning: cavium,sample-delay %u ps is too large in device tree for %s\n",
	__func__, sample_dly, dev->name);
	sample = 2 * smi_clk.s.phase - 3;
	}
	smi_clk.s.sample = sample & 0xf;
	smi_clk.s.sample_hi = (sample >> 4) & 0xf;
	debug("%s(%s): sample delay: %u ps (%d clocks)\n", __func__,
	dev->name, sample_dly, smi_clk.s.sample);
	}
	csr_wr(CVMX_SMIX_CLK(bus & 3), smi_clk.u64);

	debug("mdio clock phase: %d clocks\n", smi_clk.s.phase);
	csr_wr(CVMX_SMIX_CLK(bus & 3), smi_clk.u64);
	debug("Enabling SMI interface %s\n", dev->name);
	csr_wr(CVMX_SMIX_EN(bus & 3), 1);

	/* Muxed MDIO bus support removed for now! */
	return 0;
	}

	static const struct mdio_ops octeon_mdio_ops = {
	.read = octeon_mdio_read,
	.write = octeon_mdio_write,
	};

	static const struct udevice_id octeon_mdio_ids[] = {
	{ .compatible = "cavium,octeon-3860-mdio" },
	{}
	};

	U_BOOT_DRIVER(octeon_mdio) = {
	.name = "octeon_mdio",
	.id = UCLASS_MDIO,
	.of_match = octeon_mdio_ids,
	.probe = octeon_mdio_probe,
	.ops = &octeon_mdio_ops,
	.priv_auto = sizeof(struct octeon_mdiobus),
	};