| /* |
| * (C) Copyright 2011 CompuLab, Ltd. <www.compulab.co.il> |
| * |
| * Authors: Nikita Kiryanov <nikita@compulab.co.il> |
| * Igor Grinberg <grinberg@compulab.co.il> |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #include <common.h> |
| #include <i2c.h> |
| |
| #ifndef CONFIG_SYS_I2C_EEPROM_ADDR |
| # define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 |
| # define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 |
| #endif |
| |
| #ifndef CONFIG_SYS_I2C_EEPROM_BUS |
| #define CONFIG_SYS_I2C_EEPROM_BUS 0 |
| #endif |
| |
| #define EEPROM_LAYOUT_VER_OFFSET 44 |
| #define BOARD_SERIAL_OFFSET 20 |
| #define BOARD_SERIAL_OFFSET_LEGACY 8 |
| #define BOARD_REV_OFFSET 0 |
| #define BOARD_REV_OFFSET_LEGACY 6 |
| #define BOARD_REV_SIZE 2 |
| #define MAC_ADDR_OFFSET 4 |
| #define MAC_ADDR_OFFSET_LEGACY 0 |
| |
| #define LAYOUT_INVALID 0 |
| #define LAYOUT_LEGACY 0xff |
| |
| static int cl_eeprom_layout; /* Implicitly LAYOUT_INVALID */ |
| |
| static int cl_eeprom_read(uint offset, uchar *buf, int len) |
| { |
| int res; |
| unsigned int current_i2c_bus = i2c_get_bus_num(); |
| |
| res = i2c_set_bus_num(CONFIG_SYS_I2C_EEPROM_BUS); |
| if (res < 0) |
| return res; |
| |
| res = i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, offset, |
| CONFIG_SYS_I2C_EEPROM_ADDR_LEN, buf, len); |
| |
| i2c_set_bus_num(current_i2c_bus); |
| |
| return res; |
| } |
| |
| static int cl_eeprom_setup_layout(void) |
| { |
| int res; |
| |
| if (cl_eeprom_layout != LAYOUT_INVALID) |
| return 0; |
| |
| res = cl_eeprom_read(EEPROM_LAYOUT_VER_OFFSET, |
| (uchar *)&cl_eeprom_layout, 1); |
| if (res) { |
| cl_eeprom_layout = LAYOUT_INVALID; |
| return res; |
| } |
| |
| if (cl_eeprom_layout == 0 || cl_eeprom_layout >= 0x20) |
| cl_eeprom_layout = LAYOUT_LEGACY; |
| |
| return 0; |
| } |
| |
| void get_board_serial(struct tag_serialnr *serialnr) |
| { |
| u32 serial[2]; |
| uint offset; |
| |
| memset(serialnr, 0, sizeof(*serialnr)); |
| |
| if (cl_eeprom_setup_layout()) |
| return; |
| |
| offset = (cl_eeprom_layout != LAYOUT_LEGACY) ? |
| BOARD_SERIAL_OFFSET : BOARD_SERIAL_OFFSET_LEGACY; |
| |
| if (cl_eeprom_read(offset, (uchar *)serial, 8)) |
| return; |
| |
| if (serial[0] != 0xffffffff && serial[1] != 0xffffffff) { |
| serialnr->low = serial[0]; |
| serialnr->high = serial[1]; |
| } |
| } |
| |
| /* |
| * Routine: cl_eeprom_read_mac_addr |
| * Description: read mac address and store it in buf. |
| */ |
| int cl_eeprom_read_mac_addr(uchar *buf) |
| { |
| uint offset; |
| |
| if (cl_eeprom_setup_layout()) |
| return 0; |
| |
| offset = (cl_eeprom_layout != LAYOUT_LEGACY) ? |
| MAC_ADDR_OFFSET : MAC_ADDR_OFFSET_LEGACY; |
| |
| return cl_eeprom_read(offset, buf, 6); |
| } |
| |
| static u32 board_rev; |
| |
| /* |
| * Routine: cl_eeprom_get_board_rev |
| * Description: read system revision from eeprom |
| */ |
| u32 cl_eeprom_get_board_rev(void) |
| { |
| char str[5]; /* Legacy representation can contain at most 4 digits */ |
| uint offset = BOARD_REV_OFFSET_LEGACY; |
| |
| if (board_rev) |
| return board_rev; |
| |
| if (cl_eeprom_setup_layout()) |
| return 0; |
| |
| if (cl_eeprom_layout != LAYOUT_LEGACY) |
| offset = BOARD_REV_OFFSET; |
| |
| if (cl_eeprom_read(offset, (uchar *)&board_rev, BOARD_REV_SIZE)) |
| return 0; |
| |
| /* |
| * Convert legacy syntactic representation to semantic |
| * representation. i.e. for rev 1.00: 0x100 --> 0x64 |
| */ |
| if (cl_eeprom_layout == LAYOUT_LEGACY) { |
| sprintf(str, "%x", board_rev); |
| board_rev = simple_strtoul(str, NULL, 10); |
| } |
| |
| return board_rev; |
| }; |