| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Board functions for IGEP COM AQUILA and SMARC AM335x based boards |
| * |
| * Copyright (C) 2013-2017, ISEE 2007 SL - http://www.isee.biz/ |
| */ |
| |
| #include <config.h> |
| #include <env.h> |
| #include <errno.h> |
| #include <init.h> |
| #include <malloc.h> |
| #include <net.h> |
| #include <serial.h> |
| #include <spl.h> |
| #include <asm/arch/cpu.h> |
| #include <asm/arch/hardware.h> |
| #include <asm/arch/omap.h> |
| #include <asm/arch/ddr_defs.h> |
| #include <asm/arch/clock.h> |
| #include <asm/arch/gpio.h> |
| #include <asm/arch/mmc_host_def.h> |
| #include <asm/arch/sys_proto.h> |
| #include <asm/global_data.h> |
| #include <asm/io.h> |
| #include <asm/emif.h> |
| #include <asm/gpio.h> |
| #include <i2c.h> |
| #include <miiphy.h> |
| #include <cpsw.h> |
| #include <fdt_support.h> |
| #include <mtd_node.h> |
| #include <jffs2/load_kernel.h> |
| #include "board.h" |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| /* GPIO0_27 and GPIO0_26 are used to read board revision from IGEP003x boards |
| * and control IGEP0034 green and red LEDs. |
| * U-Boot configures these pins as input pullup to detect board revision: |
| * IGEP0034-LITE = 0b00 |
| * IGEP0034 (FULL) = 0b01 |
| * IGEP0033 = 0b1X |
| */ |
| #define GPIO_GREEN_REVISION 27 |
| #define GPIO_RED_REVISION 26 |
| |
| static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE; |
| |
| /* |
| * Routine: get_board_revision |
| * Description: Returns the board revision |
| */ |
| static int get_board_revision(void) |
| { |
| int revision; |
| |
| gpio_request(GPIO_GREEN_REVISION, "green_revision"); |
| gpio_direction_input(GPIO_GREEN_REVISION); |
| revision = 2 * gpio_get_value(GPIO_GREEN_REVISION); |
| gpio_free(GPIO_GREEN_REVISION); |
| |
| gpio_request(GPIO_RED_REVISION, "red_revision"); |
| gpio_direction_input(GPIO_RED_REVISION); |
| revision = revision + gpio_get_value(GPIO_RED_REVISION); |
| gpio_free(GPIO_RED_REVISION); |
| |
| return revision; |
| } |
| |
| #ifdef CONFIG_SPL_BUILD |
| /* PN H5TQ4G63AFR is equivalent to MT41K256M16HA125*/ |
| static const struct ddr_data ddr3_igep0034_data = { |
| .datardsratio0 = MT41K256M16HA125E_RD_DQS, |
| .datawdsratio0 = MT41K256M16HA125E_WR_DQS, |
| .datafwsratio0 = MT41K256M16HA125E_PHY_FIFO_WE, |
| .datawrsratio0 = MT41K256M16HA125E_PHY_WR_DATA, |
| }; |
| |
| static const struct ddr_data ddr3_igep0034_lite_data = { |
| .datardsratio0 = K4B2G1646EBIH9_RD_DQS, |
| .datawdsratio0 = K4B2G1646EBIH9_WR_DQS, |
| .datafwsratio0 = K4B2G1646EBIH9_PHY_FIFO_WE, |
| .datawrsratio0 = K4B2G1646EBIH9_PHY_WR_DATA, |
| }; |
| |
| static const struct cmd_control ddr3_igep0034_cmd_ctrl_data = { |
| .cmd0csratio = MT41K256M16HA125E_RATIO, |
| .cmd0iclkout = MT41K256M16HA125E_INVERT_CLKOUT, |
| |
| .cmd1csratio = MT41K256M16HA125E_RATIO, |
| .cmd1iclkout = MT41K256M16HA125E_INVERT_CLKOUT, |
| |
| .cmd2csratio = MT41K256M16HA125E_RATIO, |
| .cmd2iclkout = MT41K256M16HA125E_INVERT_CLKOUT, |
| }; |
| |
| static const struct cmd_control ddr3_igep0034_lite_cmd_ctrl_data = { |
| .cmd0csratio = K4B2G1646EBIH9_RATIO, |
| .cmd0iclkout = K4B2G1646EBIH9_INVERT_CLKOUT, |
| |
| .cmd1csratio = K4B2G1646EBIH9_RATIO, |
| .cmd1iclkout = K4B2G1646EBIH9_INVERT_CLKOUT, |
| |
| .cmd2csratio = K4B2G1646EBIH9_RATIO, |
| .cmd2iclkout = K4B2G1646EBIH9_INVERT_CLKOUT, |
| }; |
| |
| static struct emif_regs ddr3_igep0034_emif_reg_data = { |
| .sdram_config = MT41K256M16HA125E_EMIF_SDCFG, |
| .ref_ctrl = MT41K256M16HA125E_EMIF_SDREF, |
| .sdram_tim1 = MT41K256M16HA125E_EMIF_TIM1, |
| .sdram_tim2 = MT41K256M16HA125E_EMIF_TIM2, |
| .sdram_tim3 = MT41K256M16HA125E_EMIF_TIM3, |
| .zq_config = MT41K256M16HA125E_ZQ_CFG, |
| .emif_ddr_phy_ctlr_1 = MT41K256M16HA125E_EMIF_READ_LATENCY, |
| }; |
| |
| static struct emif_regs ddr3_igep0034_lite_emif_reg_data = { |
| .sdram_config = K4B2G1646EBIH9_EMIF_SDCFG, |
| .ref_ctrl = K4B2G1646EBIH9_EMIF_SDREF, |
| .sdram_tim1 = K4B2G1646EBIH9_EMIF_TIM1, |
| .sdram_tim2 = K4B2G1646EBIH9_EMIF_TIM2, |
| .sdram_tim3 = K4B2G1646EBIH9_EMIF_TIM3, |
| .zq_config = K4B2G1646EBIH9_ZQ_CFG, |
| .emif_ddr_phy_ctlr_1 = K4B2G1646EBIH9_EMIF_READ_LATENCY, |
| }; |
| |
| const struct ctrl_ioregs ioregs_igep0034 = { |
| .cm0ioctl = MT41K256M16HA125E_IOCTRL_VALUE, |
| .cm1ioctl = MT41K256M16HA125E_IOCTRL_VALUE, |
| .cm2ioctl = MT41K256M16HA125E_IOCTRL_VALUE, |
| .dt0ioctl = MT41K256M16HA125E_IOCTRL_VALUE, |
| .dt1ioctl = MT41K256M16HA125E_IOCTRL_VALUE, |
| }; |
| |
| const struct ctrl_ioregs ioregs_igep0034_lite = { |
| .cm0ioctl = K4B2G1646EBIH9_IOCTRL_VALUE, |
| .cm1ioctl = K4B2G1646EBIH9_IOCTRL_VALUE, |
| .cm2ioctl = K4B2G1646EBIH9_IOCTRL_VALUE, |
| .dt0ioctl = K4B2G1646EBIH9_IOCTRL_VALUE, |
| .dt1ioctl = K4B2G1646EBIH9_IOCTRL_VALUE, |
| }; |
| |
| #define OSC (V_OSCK/1000000) |
| const struct dpll_params dpll_ddr = { |
| 400, OSC-1, 1, -1, -1, -1, -1}; |
| |
| const struct dpll_params *get_dpll_ddr_params(void) |
| { |
| return &dpll_ddr; |
| } |
| |
| void set_uart_mux_conf(void) |
| { |
| enable_uart0_pin_mux(); |
| } |
| |
| void set_mux_conf_regs(void) |
| { |
| enable_board_pin_mux(); |
| } |
| |
| void sdram_init(void) |
| { |
| if (get_board_revision() == 1) |
| config_ddr(400, &ioregs_igep0034, &ddr3_igep0034_data, |
| &ddr3_igep0034_cmd_ctrl_data, &ddr3_igep0034_emif_reg_data, 0); |
| else |
| config_ddr(400, &ioregs_igep0034_lite, &ddr3_igep0034_lite_data, |
| &ddr3_igep0034_lite_cmd_ctrl_data, &ddr3_igep0034_lite_emif_reg_data, 0); |
| } |
| |
| #ifdef CONFIG_SPL_OS_BOOT |
| int spl_start_uboot(void) |
| { |
| /* break into full u-boot on 'c' */ |
| return serial_tstc() && serial_getc() == 'c'; |
| } |
| #endif |
| #endif |
| |
| /* |
| * Basic board specific setup. Pinmux has been handled already. |
| */ |
| int board_init(void) |
| { |
| gd->bd->bi_boot_params = CFG_SYS_SDRAM_BASE + 0x100; |
| |
| gpmc_init(); |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_BOARD_LATE_INIT |
| int board_late_init(void) |
| { |
| #ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG |
| switch (get_board_revision()) { |
| case 0: |
| env_set("board_name", "igep0034-lite"); |
| break; |
| case 1: |
| env_set("board_name", "igep0034"); |
| break; |
| default: |
| env_set("board_name", "igep0033"); |
| break; |
| } |
| #endif |
| return 0; |
| } |
| #endif |
| |
| #ifdef CONFIG_OF_BOARD_SETUP |
| int ft_board_setup(void *blob, struct bd_info *bd) |
| { |
| #ifdef CONFIG_FDT_FIXUP_PARTITIONS |
| static const struct node_info nodes[] = { |
| { "ti,omap2-nand", MTD_DEV_TYPE_NAND, }, |
| }; |
| |
| fdt_fixup_mtdparts(blob, nodes, ARRAY_SIZE(nodes)); |
| #endif |
| return 0; |
| } |
| #endif |
| |
| #if defined(CONFIG_DRIVER_TI_CPSW) |
| static void cpsw_control(int enabled) |
| { |
| /* VTP can be added here */ |
| |
| return; |
| } |
| |
| static struct cpsw_slave_data cpsw_slaves[] = { |
| { |
| .slave_reg_ofs = 0x208, |
| .sliver_reg_ofs = 0xd80, |
| .phy_addr = 0, |
| .phy_if = PHY_INTERFACE_MODE_RMII, |
| }, |
| }; |
| |
| static struct cpsw_platform_data cpsw_data = { |
| .mdio_base = CPSW_MDIO_BASE, |
| .cpsw_base = CPSW_BASE, |
| .mdio_div = 0xff, |
| .channels = 8, |
| .cpdma_reg_ofs = 0x800, |
| .slaves = 1, |
| .slave_data = cpsw_slaves, |
| .ale_reg_ofs = 0xd00, |
| .ale_entries = 1024, |
| .host_port_reg_ofs = 0x108, |
| .hw_stats_reg_ofs = 0x900, |
| .bd_ram_ofs = 0x2000, |
| .mac_control = (1 << 5), |
| .control = cpsw_control, |
| .host_port_num = 0, |
| .version = CPSW_CTRL_VERSION_2, |
| }; |
| |
| int board_eth_init(struct bd_info *bis) |
| { |
| int rv, ret = 0; |
| uint8_t mac_addr[6]; |
| uint32_t mac_hi, mac_lo; |
| |
| if (!eth_env_get_enetaddr("ethaddr", mac_addr)) { |
| /* try reading mac address from efuse */ |
| mac_lo = readl(&cdev->macid0l); |
| mac_hi = readl(&cdev->macid0h); |
| mac_addr[0] = mac_hi & 0xFF; |
| mac_addr[1] = (mac_hi & 0xFF00) >> 8; |
| mac_addr[2] = (mac_hi & 0xFF0000) >> 16; |
| mac_addr[3] = (mac_hi & 0xFF000000) >> 24; |
| mac_addr[4] = mac_lo & 0xFF; |
| mac_addr[5] = (mac_lo & 0xFF00) >> 8; |
| if (is_valid_ethaddr(mac_addr)) |
| eth_env_set_enetaddr("ethaddr", mac_addr); |
| } |
| |
| writel((GMII1_SEL_RMII | RMII1_IO_CLK_EN), |
| &cdev->miisel); |
| |
| if (get_board_revision() == 1) |
| cpsw_slaves[0].phy_addr = 1; |
| |
| rv = cpsw_register(&cpsw_data); |
| if (rv < 0) |
| printf("Error %d registering CPSW switch\n", rv); |
| else |
| ret += rv; |
| |
| return ret; |
| } |
| #endif |