| /* |
| * (C) Copyright 2001 |
| * Denis Peter, MPL AG Switzerland, d.peter@mpl.ch. |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| * partly derived from |
| * linux/drivers/scsi/sym53c8xx.c |
| * |
| */ |
| |
| /* |
| * SCSI support based on the chip sym53C810. |
| * |
| * 09-19-2001 Andreas Heppel, Sysgo RTS GmbH <aheppel@sysgo.de> |
| * The local version of this driver for the BAB750 board does not |
| * use interrupts but polls the chip instead (see the call of |
| * 'handle_scsi_int()' in 'scsi_issue()'. |
| */ |
| |
| #include <common.h> |
| |
| #include <command.h> |
| #include <pci.h> |
| #include <asm/processor.h> |
| #include <sym53c8xx.h> |
| #include <scsi.h> |
| |
| #undef SYM53C8XX_DEBUG |
| |
| #ifdef SYM53C8XX_DEBUG |
| #define PRINTF(fmt,args...) printf (fmt ,##args) |
| #else |
| #define PRINTF(fmt,args...) |
| #endif |
| |
| #if defined(CONFIG_CMD_SCSI) && defined(CONFIG_SCSI_SYM53C8XX) |
| |
| #undef SCSI_SINGLE_STEP |
| /* |
| * Single Step is only used for debug purposes |
| */ |
| #ifdef SCSI_SINGLE_STEP |
| static unsigned long start_script_select; |
| static unsigned long start_script_msgout; |
| static unsigned long start_script_msgin; |
| static unsigned long start_script_msg_ext; |
| static unsigned long start_script_cmd; |
| static unsigned long start_script_data_in; |
| static unsigned long start_script_data_out; |
| static unsigned long start_script_status; |
| static unsigned long start_script_complete; |
| static unsigned long start_script_error; |
| static unsigned long start_script_reselection; |
| static unsigned int len_script_select; |
| static unsigned int len_script_msgout; |
| static unsigned int len_script_msgin; |
| static unsigned int len_script_msg_ext; |
| static unsigned int len_script_cmd; |
| static unsigned int len_script_data_in; |
| static unsigned int len_script_data_out; |
| static unsigned int len_script_status; |
| static unsigned int len_script_complete; |
| static unsigned int len_script_error; |
| static unsigned int len_script_reselection; |
| #endif |
| |
| |
| static unsigned short scsi_int_mask; /* shadow register for SCSI related interrupts */ |
| static unsigned char script_int_mask; /* shadow register for SCRIPT related interrupts */ |
| static unsigned long script_select[8]; /* script for selection */ |
| static unsigned long script_msgout[8]; /* script for message out phase (NOT USED) */ |
| static unsigned long script_msgin[14]; /* script for message in phase */ |
| static unsigned long script_msg_ext[32]; /* script for message in phase when more than 1 byte message */ |
| static unsigned long script_cmd[18]; /* script for command phase */ |
| static unsigned long script_data_in[8]; /* script for data in phase */ |
| static unsigned long script_data_out[8]; /* script for data out phase */ |
| static unsigned long script_status[6]; /* script for status phase */ |
| static unsigned long script_complete[10]; /* script for complete */ |
| static unsigned long script_reselection[4]; /* script for reselection (NOT USED) */ |
| static unsigned long script_error[2]; /* script for error handling */ |
| |
| static unsigned long int_stat[3]; /* interrupt status */ |
| static unsigned long scsi_mem_addr; /* base memory address =SCSI_MEM_ADDRESS; */ |
| |
| #define bus_to_phys(a) pci_mem_to_phys(busdevfunc, (unsigned long) (a)) |
| #define phys_to_bus(a) pci_phys_to_mem(busdevfunc, (unsigned long) (a)) |
| |
| #define SCSI_MAX_RETRY 3 /* number of retries in scsi_issue() */ |
| |
| #define SCSI_MAX_RETRY_NOT_READY 10 /* number of retries when device is not ready */ |
| #define SCSI_NOT_READY_TIME_OUT 500 /* timeout per retry when not ready */ |
| |
| /********************************************************************************* |
| * forward declerations |
| */ |
| |
| void scsi_chip_init(void); |
| void handle_scsi_int(void); |
| |
| |
| /******************************************************************************** |
| * reports SCSI errors to the user |
| */ |
| void scsi_print_error (ccb * pccb) |
| { |
| int i; |
| |
| printf ("SCSI Error: Target %d LUN %d Command %02X\n", pccb->target, |
| pccb->lun, pccb->cmd[0]); |
| printf (" CCB: "); |
| for (i = 0; i < pccb->cmdlen; i++) |
| printf ("%02X ", pccb->cmd[i]); |
| printf ("(len=%d)\n", pccb->cmdlen); |
| printf (" Cntrl: "); |
| switch (pccb->contr_stat) { |
| case SIR_COMPLETE: |
| printf ("Complete (no Error)\n"); |
| break; |
| case SIR_SEL_ATN_NO_MSG_OUT: |
| printf ("Selected with ATN no MSG out phase\n"); |
| break; |
| case SIR_CMD_OUT_ILL_PH: |
| printf ("Command out illegal phase\n"); |
| break; |
| case SIR_MSG_RECEIVED: |
| printf ("MSG received Error\n"); |
| break; |
| case SIR_DATA_IN_ERR: |
| printf ("Data in Error\n"); |
| break; |
| case SIR_DATA_OUT_ERR: |
| printf ("Data out Error\n"); |
| break; |
| case SIR_SCRIPT_ERROR: |
| printf ("Script Error\n"); |
| break; |
| case SIR_MSG_OUT_NO_CMD: |
| printf ("MSG out no Command phase\n"); |
| break; |
| case SIR_MSG_OVER7: |
| printf ("MSG in over 7 bytes\n"); |
| break; |
| case INT_ON_FY: |
| printf ("Interrupt on fly\n"); |
| break; |
| case SCSI_SEL_TIME_OUT: |
| printf ("SCSI Selection Timeout\n"); |
| break; |
| case SCSI_HNS_TIME_OUT: |
| printf ("SCSI Handshake Timeout\n"); |
| break; |
| case SCSI_MA_TIME_OUT: |
| printf ("SCSI Phase Error\n"); |
| break; |
| case SCSI_UNEXP_DIS: |
| printf ("SCSI unexpected disconnect\n"); |
| break; |
| default: |
| printf ("unknown status %lx\n", pccb->contr_stat); |
| break; |
| } |
| printf (" Sense: SK %x (", pccb->sense_buf[2] & 0x0f); |
| switch (pccb->sense_buf[2] & 0xf) { |
| case SENSE_NO_SENSE: |
| printf ("No Sense)"); |
| break; |
| case SENSE_RECOVERED_ERROR: |
| printf ("Recovered Error)"); |
| break; |
| case SENSE_NOT_READY: |
| printf ("Not Ready)"); |
| break; |
| case SENSE_MEDIUM_ERROR: |
| printf ("Medium Error)"); |
| break; |
| case SENSE_HARDWARE_ERROR: |
| printf ("Hardware Error)"); |
| break; |
| case SENSE_ILLEGAL_REQUEST: |
| printf ("Illegal request)"); |
| break; |
| case SENSE_UNIT_ATTENTION: |
| printf ("Unit Attention)"); |
| break; |
| case SENSE_DATA_PROTECT: |
| printf ("Data Protect)"); |
| break; |
| case SENSE_BLANK_CHECK: |
| printf ("Blank check)"); |
| break; |
| case SENSE_VENDOR_SPECIFIC: |
| printf ("Vendor specific)"); |
| break; |
| case SENSE_COPY_ABORTED: |
| printf ("Copy aborted)"); |
| break; |
| case SENSE_ABORTED_COMMAND: |
| printf ("Aborted Command)"); |
| break; |
| case SENSE_VOLUME_OVERFLOW: |
| printf ("Volume overflow)"); |
| break; |
| case SENSE_MISCOMPARE: |
| printf ("Misscompare\n"); |
| break; |
| default: |
| printf ("Illegal Sensecode\n"); |
| break; |
| } |
| printf (" ASC %x ASCQ %x\n", pccb->sense_buf[12], |
| pccb->sense_buf[13]); |
| printf (" Status: "); |
| switch (pccb->status) { |
| case S_GOOD: |
| printf ("Good\n"); |
| break; |
| case S_CHECK_COND: |
| printf ("Check condition\n"); |
| break; |
| case S_COND_MET: |
| printf ("Condition Met\n"); |
| break; |
| case S_BUSY: |
| printf ("Busy\n"); |
| break; |
| case S_INT: |
| printf ("Intermediate\n"); |
| break; |
| case S_INT_COND_MET: |
| printf ("Intermediate condition met\n"); |
| break; |
| case S_CONFLICT: |
| printf ("Reservation conflict\n"); |
| break; |
| case S_TERMINATED: |
| printf ("Command terminated\n"); |
| break; |
| case S_QUEUE_FULL: |
| printf ("Task set full\n"); |
| break; |
| default: |
| printf ("unknown: %02X\n", pccb->status); |
| break; |
| } |
| |
| } |
| |
| |
| /****************************************************************************** |
| * sets-up the SCSI controller |
| * the base memory address is retrieved via the pci_read_config_dword |
| */ |
| void scsi_low_level_init(int busdevfunc) |
| { |
| unsigned int cmd; |
| unsigned int addr; |
| unsigned char vec; |
| |
| pci_read_config_byte(busdevfunc, PCI_INTERRUPT_LINE, &vec); |
| pci_read_config_dword(busdevfunc, PCI_BASE_ADDRESS_1, &addr); |
| |
| addr = bus_to_phys(addr & ~0xf); |
| |
| /* |
| * Enable bus mastering in case this has not been done, yet. |
| */ |
| pci_read_config_dword(busdevfunc, PCI_COMMAND, &cmd); |
| cmd |= PCI_COMMAND_MASTER; |
| pci_write_config_dword(busdevfunc, PCI_COMMAND, cmd); |
| |
| scsi_mem_addr = addr; |
| |
| scsi_chip_init(); |
| scsi_bus_reset(); |
| } |
| |
| |
| /************************************************************************************ |
| * Low level Part of SCSI Driver |
| */ |
| |
| /* |
| * big-endian -> little endian conversion for the script |
| */ |
| unsigned long swap_script(unsigned long val) |
| { |
| unsigned long tmp; |
| tmp = ((val>>24)&0xff) | ((val>>8)&0xff00) | ((val<<8)&0xff0000) | ((val<<24)&0xff000000); |
| return tmp; |
| } |
| |
| |
| void scsi_write_byte(ulong offset,unsigned char val) |
| { |
| out8(scsi_mem_addr+offset,val); |
| } |
| |
| |
| unsigned char scsi_read_byte(ulong offset) |
| { |
| return(in8(scsi_mem_addr+offset)); |
| } |
| |
| |
| /******************************************************************************** |
| * interrupt handler |
| */ |
| void handle_scsi_int(void) |
| { |
| unsigned char stat,stat1,stat2; |
| unsigned short sstat; |
| int i; |
| #ifdef SCSI_SINGLE_STEP |
| unsigned long tt; |
| #endif |
| stat=scsi_read_byte(ISTAT); |
| if((stat & DIP)==DIP) { /* DMA Interrupt pending */ |
| stat1=scsi_read_byte(DSTAT); |
| #ifdef SCSI_SINGLE_STEP |
| if((stat1 & SSI)==SSI) { |
| tt=in32r(scsi_mem_addr+DSP); |
| if(((tt)>=start_script_select) && ((tt)<start_script_select+len_script_select)) { |
| printf("select %d\n",(tt-start_script_select)>>2); |
| goto end_single; |
| } |
| if(((tt)>=start_script_msgout) && ((tt)<start_script_msgout+len_script_msgout)) { |
| printf("msgout %d\n",(tt-start_script_msgout)>>2); |
| goto end_single; |
| } |
| if(((tt)>=start_script_msgin) && ((tt)<start_script_msgin+len_script_msgin)) { |
| printf("msgin %d\n",(tt-start_script_msgin)>>2); |
| goto end_single; |
| } |
| if(((tt)>=start_script_msg_ext) && ((tt)<start_script_msg_ext+len_script_msg_ext)) { |
| printf("msgin_ext %d\n",(tt-start_script_msg_ext)>>2); |
| goto end_single; |
| } |
| if(((tt)>=start_script_cmd) && ((tt)<start_script_cmd+len_script_cmd)) { |
| printf("cmd %d\n",(tt-start_script_cmd)>>2); |
| goto end_single; |
| } |
| if(((tt)>=start_script_data_in) && ((tt)<start_script_data_in+len_script_data_in)) { |
| printf("data_in %d\n",(tt-start_script_data_in)>>2); |
| goto end_single; |
| } |
| if(((tt)>=start_script_data_out) && ((tt)<start_script_data_out+len_script_data_out)) { |
| printf("data_out %d\n",(tt-start_script_data_out)>>2); |
| goto end_single; |
| } |
| if(((tt)>=start_script_status) && ((tt)<start_script_status+len_script_status)) { |
| printf("status %d\n",(tt-start_script_status)>>2); |
| goto end_single; |
| } |
| if(((tt)>=start_script_complete) && ((tt)<start_script_complete+len_script_complete)) { |
| printf("complete %d\n",(tt-start_script_complete)>>2); |
| goto end_single; |
| } |
| if(((tt)>=start_script_error) && ((tt)<start_script_error+len_script_error)) { |
| printf("error %d\n",(tt-start_script_error)>>2); |
| goto end_single; |
| } |
| if(((tt)>=start_script_reselection) && ((tt)<start_script_reselection+len_script_reselection)) { |
| printf("reselection %d\n",(tt-start_script_reselection)>>2); |
| goto end_single; |
| } |
| printf("sc: %lx\n",tt); |
| end_single: |
| stat2=scsi_read_byte(DCNTL); |
| stat2|=STD; |
| scsi_write_byte(DCNTL,stat2); |
| } |
| #endif |
| if((stat1 & SIR)==SIR) /* script interrupt */ |
| { |
| int_stat[0]=in32(scsi_mem_addr+DSPS); |
| } |
| if((stat1 & DFE)==0) { /* fifo not epmty */ |
| scsi_write_byte(CTEST3,CLF); /* Clear DMA FIFO */ |
| stat2=scsi_read_byte(STEST3); |
| scsi_write_byte(STEST3,(stat2 | CSF)); /* Clear SCSI FIFO */ |
| } |
| } |
| if((stat & SIP)==SIP) { /* scsi interrupt */ |
| sstat = (unsigned short)scsi_read_byte(SIST+1); |
| sstat <<=8; |
| sstat |= (unsigned short)scsi_read_byte(SIST); |
| for(i=0;i<3;i++) { |
| if(int_stat[i]==0) |
| break; /* found an empty int status */ |
| } |
| int_stat[i]=SCSI_INT_STATE | sstat; |
| stat1=scsi_read_byte(DSTAT); |
| if((stat1 & DFE)==0) { /* fifo not epmty */ |
| scsi_write_byte(CTEST3,CLF); /* Clear DMA FIFO */ |
| stat2=scsi_read_byte(STEST3); |
| scsi_write_byte(STEST3,(stat2 | CSF)); /* Clear SCSI FIFO */ |
| } |
| } |
| if((stat & INTF)==INTF) { /* interrupt on Fly */ |
| scsi_write_byte(ISTAT,stat); /* clear it */ |
| for(i=0;i<3;i++) { |
| if(int_stat[i]==0) |
| break; /* found an empty int status */ |
| } |
| int_stat[i]=INT_ON_FY; |
| } |
| } |
| |
| void scsi_bus_reset(void) |
| { |
| unsigned char t; |
| int i; |
| int end = CONFIG_SYS_SCSI_SPIN_UP_TIME*1000; |
| |
| t=scsi_read_byte(SCNTL1); |
| scsi_write_byte(SCNTL1,(t | CRST)); |
| udelay(50); |
| scsi_write_byte(SCNTL1,t); |
| |
| puts("waiting for devices to spin up"); |
| for(i=0;i<end;i++) { |
| udelay(1000); /* give the devices time to spin up */ |
| if (i % 1000 == 0) |
| putc('.'); |
| } |
| putc('\n'); |
| scsi_chip_init(); /* reinit the chip ...*/ |
| |
| } |
| |
| void scsi_int_enable(void) |
| { |
| scsi_write_byte(SIEN,(unsigned char)scsi_int_mask); |
| scsi_write_byte(SIEN+1,(unsigned char)(scsi_int_mask>>8)); |
| scsi_write_byte(DIEN,script_int_mask); |
| } |
| |
| void scsi_write_dsp(unsigned long start) |
| { |
| #ifdef SCSI_SINGLE_STEP |
| unsigned char t; |
| #endif |
| out32r(scsi_mem_addr + DSP,start); |
| #ifdef SCSI_SINGLE_STEP |
| t=scsi_read_byte(DCNTL); |
| t|=STD; |
| scsi_write_byte(DCNTL,t); |
| #endif |
| } |
| |
| /* only used for debug purposes */ |
| void scsi_print_script(void) |
| { |
| printf("script_select @ 0x%08lX\n",(unsigned long)&script_select[0]); |
| printf("script_msgout @ 0x%08lX\n",(unsigned long)&script_msgout[0]); |
| printf("script_msgin @ 0x%08lX\n",(unsigned long)&script_msgin[0]); |
| printf("script_msgext @ 0x%08lX\n",(unsigned long)&script_msg_ext[0]); |
| printf("script_cmd @ 0x%08lX\n",(unsigned long)&script_cmd[0]); |
| printf("script_data_in @ 0x%08lX\n",(unsigned long)&script_data_in[0]); |
| printf("script_data_out @ 0x%08lX\n",(unsigned long)&script_data_out[0]); |
| printf("script_status @ 0x%08lX\n",(unsigned long)&script_status[0]); |
| printf("script_complete @ 0x%08lX\n",(unsigned long)&script_complete[0]); |
| printf("script_error @ 0x%08lX\n",(unsigned long)&script_error[0]); |
| } |
| |
| |
| void scsi_set_script(ccb *pccb) |
| { |
| int busdevfunc = pccb->priv; |
| int i; |
| i=0; |
| script_select[i++]=swap_script(SCR_REG_REG(GPREG, SCR_AND, 0xfe)); |
| script_select[i++]=0; /* LED ON */ |
| script_select[i++]=swap_script(SCR_CLR(SCR_TRG)); /* select initiator mode */ |
| script_select[i++]=0; |
| /* script_select[i++]=swap_script(SCR_SEL_ABS_ATN | pccb->target << 16); */ |
| script_select[i++]=swap_script(SCR_SEL_ABS | pccb->target << 16); |
| script_select[i++]=swap_script(phys_to_bus(&script_cmd[4])); /* error handling */ |
| script_select[i++]=swap_script(SCR_JUMP); /* next section */ |
| /* script_select[i++]=swap_script((unsigned long)&script_msgout[0]); */ /* message out */ |
| script_select[i++]=swap_script(phys_to_bus(&script_cmd[0])); /* command out */ |
| |
| #ifdef SCSI_SINGLE_STEP |
| start_script_select=(unsigned long)&script_select[0]; |
| len_script_select=i*4; |
| #endif |
| |
| i=0; |
| script_msgout[i++]=swap_script(SCR_INT ^ IFFALSE (WHEN (SCR_MSG_OUT))); |
| script_msgout[i++]=SIR_SEL_ATN_NO_MSG_OUT; |
| script_msgout[i++]=swap_script( SCR_MOVE_ABS(1) ^ SCR_MSG_OUT); |
| script_msgout[i++]=swap_script(phys_to_bus(&pccb->msgout[0])); |
| script_msgout[i++]=swap_script(SCR_JUMP ^ IFTRUE (WHEN (SCR_COMMAND))); /* if Command phase */ |
| script_msgout[i++]=swap_script(phys_to_bus(&script_cmd[0])); /* switch to command */ |
| script_msgout[i++]=swap_script(SCR_INT); /* interrupt if not */ |
| script_msgout[i++]=SIR_MSG_OUT_NO_CMD; |
| |
| #ifdef SCSI_SINGLE_STEP |
| start_script_msgout=(unsigned long)&script_msgout[0]; |
| len_script_msgout=i*4; |
| #endif |
| i=0; |
| script_cmd[i++]=swap_script(SCR_MOVE_ABS(pccb->cmdlen) ^ SCR_COMMAND); |
| script_cmd[i++]=swap_script(phys_to_bus(&pccb->cmd[0])); |
| script_cmd[i++]=swap_script(SCR_JUMP ^ IFTRUE (WHEN (SCR_MSG_IN))); /* message in ? */ |
| script_cmd[i++]=swap_script(phys_to_bus(&script_msgin[0])); |
| script_cmd[i++]=swap_script(SCR_JUMP ^ IFTRUE (IF (SCR_DATA_OUT))); /* data out ? */ |
| script_cmd[i++]=swap_script(phys_to_bus(&script_data_out[0])); |
| script_cmd[i++]=swap_script(SCR_JUMP ^ IFTRUE (IF (SCR_DATA_IN))); /* data in ? */ |
| script_cmd[i++]=swap_script(phys_to_bus(&script_data_in[0])); |
| script_cmd[i++]=swap_script(SCR_JUMP ^ IFTRUE (IF (SCR_STATUS))); /* status ? */ |
| script_cmd[i++]=swap_script(phys_to_bus(&script_status[0])); |
| script_cmd[i++]=swap_script(SCR_JUMP ^ IFTRUE (IF (SCR_COMMAND))); /* command ? */ |
| script_cmd[i++]=swap_script(phys_to_bus(&script_cmd[0])); |
| script_cmd[i++]=swap_script(SCR_JUMP ^ IFTRUE (IF (SCR_MSG_OUT))); /* message out ? */ |
| script_cmd[i++]=swap_script(phys_to_bus(&script_msgout[0])); |
| script_cmd[i++]=swap_script(SCR_JUMP ^ IFTRUE (IF (SCR_MSG_IN))); /* just for error handling message in ? */ |
| script_cmd[i++]=swap_script(phys_to_bus(&script_msgin[0])); |
| script_cmd[i++]=swap_script(SCR_INT); /* interrupt if not */ |
| script_cmd[i++]=SIR_CMD_OUT_ILL_PH; |
| #ifdef SCSI_SINGLE_STEP |
| start_script_cmd=(unsigned long)&script_cmd[0]; |
| len_script_cmd=i*4; |
| #endif |
| i=0; |
| script_data_out[i++]=swap_script(SCR_MOVE_ABS(pccb->datalen)^ SCR_DATA_OUT); /* move */ |
| script_data_out[i++]=swap_script(phys_to_bus(pccb->pdata)); /* pointer to buffer */ |
| script_data_out[i++]=swap_script(SCR_JUMP ^ IFTRUE (WHEN (SCR_STATUS))); |
| script_data_out[i++]=swap_script(phys_to_bus(&script_status[0])); |
| script_data_out[i++]=swap_script(SCR_INT); |
| script_data_out[i++]=SIR_DATA_OUT_ERR; |
| |
| #ifdef SCSI_SINGLE_STEP |
| start_script_data_out=(unsigned long)&script_data_out[0]; |
| len_script_data_out=i*4; |
| #endif |
| i=0; |
| script_data_in[i++]=swap_script(SCR_MOVE_ABS(pccb->datalen)^ SCR_DATA_IN); /* move */ |
| script_data_in[i++]=swap_script(phys_to_bus(pccb->pdata)); /* pointer to buffer */ |
| script_data_in[i++]=swap_script(SCR_JUMP ^ IFTRUE (WHEN (SCR_STATUS))); |
| script_data_in[i++]=swap_script(phys_to_bus(&script_status[0])); |
| script_data_in[i++]=swap_script(SCR_INT); |
| script_data_in[i++]=SIR_DATA_IN_ERR; |
| #ifdef SCSI_SINGLE_STEP |
| start_script_data_in=(unsigned long)&script_data_in[0]; |
| len_script_data_in=i*4; |
| #endif |
| i=0; |
| script_msgin[i++]=swap_script(SCR_MOVE_ABS (1) ^ SCR_MSG_IN); |
| script_msgin[i++]=swap_script(phys_to_bus(&pccb->msgin[0])); |
| script_msgin[i++]=swap_script(SCR_JUMP ^ IFTRUE (DATA (M_COMPLETE))); |
| script_msgin[i++]=swap_script(phys_to_bus(&script_complete[0])); |
| script_msgin[i++]=swap_script(SCR_JUMP ^ IFTRUE (DATA (M_DISCONNECT))); |
| script_msgin[i++]=swap_script(phys_to_bus(&script_complete[0])); |
| script_msgin[i++]=swap_script(SCR_JUMP ^ IFTRUE (DATA (M_SAVE_DP))); |
| script_msgin[i++]=swap_script(phys_to_bus(&script_complete[0])); |
| script_msgin[i++]=swap_script(SCR_JUMP ^ IFTRUE (DATA (M_RESTORE_DP))); |
| script_msgin[i++]=swap_script(phys_to_bus(&script_complete[0])); |
| script_msgin[i++]=swap_script(SCR_JUMP ^ IFTRUE (DATA (M_EXTENDED))); |
| script_msgin[i++]=swap_script(phys_to_bus(&script_msg_ext[0])); |
| script_msgin[i++]=swap_script(SCR_INT); |
| script_msgin[i++]=SIR_MSG_RECEIVED; |
| #ifdef SCSI_SINGLE_STEP |
| start_script_msgin=(unsigned long)&script_msgin[0]; |
| len_script_msgin=i*4; |
| #endif |
| i=0; |
| script_msg_ext[i++]=swap_script(SCR_CLR (SCR_ACK)); /* clear ACK */ |
| script_msg_ext[i++]=0; |
| script_msg_ext[i++]=swap_script(SCR_MOVE_ABS (1) ^ SCR_MSG_IN); /* assuming this is the msg length */ |
| script_msg_ext[i++]=swap_script(phys_to_bus(&pccb->msgin[1])); |
| script_msg_ext[i++]=swap_script(SCR_JUMP ^ IFFALSE (IF (SCR_MSG_IN))); |
| script_msg_ext[i++]=swap_script(phys_to_bus(&script_complete[0])); /* no more bytes */ |
| script_msg_ext[i++]=swap_script(SCR_MOVE_ABS (1) ^ SCR_MSG_IN); /* next */ |
| script_msg_ext[i++]=swap_script(phys_to_bus(&pccb->msgin[2])); |
| script_msg_ext[i++]=swap_script(SCR_JUMP ^ IFFALSE (IF (SCR_MSG_IN))); |
| script_msg_ext[i++]=swap_script(phys_to_bus(&script_complete[0])); /* no more bytes */ |
| script_msg_ext[i++]=swap_script(SCR_MOVE_ABS (1) ^ SCR_MSG_IN); /* next */ |
| script_msg_ext[i++]=swap_script(phys_to_bus(&pccb->msgin[3])); |
| script_msg_ext[i++]=swap_script(SCR_JUMP ^ IFFALSE (IF (SCR_MSG_IN))); |
| script_msg_ext[i++]=swap_script(phys_to_bus(&script_complete[0])); /* no more bytes */ |
| script_msg_ext[i++]=swap_script(SCR_MOVE_ABS (1) ^ SCR_MSG_IN); /* next */ |
| script_msg_ext[i++]=swap_script(phys_to_bus(&pccb->msgin[4])); |
| script_msg_ext[i++]=swap_script(SCR_JUMP ^ IFFALSE (IF (SCR_MSG_IN))); |
| script_msg_ext[i++]=swap_script(phys_to_bus(&script_complete[0])); /* no more bytes */ |
| script_msg_ext[i++]=swap_script(SCR_MOVE_ABS (1) ^ SCR_MSG_IN); /* next */ |
| script_msg_ext[i++]=swap_script(phys_to_bus(&pccb->msgin[5])); |
| script_msg_ext[i++]=swap_script(SCR_JUMP ^ IFFALSE (IF (SCR_MSG_IN))); |
| script_msg_ext[i++]=swap_script(phys_to_bus(&script_complete[0])); /* no more bytes */ |
| script_msg_ext[i++]=swap_script(SCR_MOVE_ABS (1) ^ SCR_MSG_IN); /* next */ |
| script_msg_ext[i++]=swap_script(phys_to_bus(&pccb->msgin[6])); |
| script_msg_ext[i++]=swap_script(SCR_JUMP ^ IFFALSE (IF (SCR_MSG_IN))); |
| script_msg_ext[i++]=swap_script(phys_to_bus(&script_complete[0])); /* no more bytes */ |
| script_msg_ext[i++]=swap_script(SCR_MOVE_ABS (1) ^ SCR_MSG_IN); /* next */ |
| script_msg_ext[i++]=swap_script(phys_to_bus(&pccb->msgin[7])); |
| script_msg_ext[i++]=swap_script(SCR_JUMP ^ IFFALSE (IF (SCR_MSG_IN))); |
| script_msg_ext[i++]=swap_script(phys_to_bus(&script_complete[0])); /* no more bytes */ |
| script_msg_ext[i++]=swap_script(SCR_INT); |
| script_msg_ext[i++]=SIR_MSG_OVER7; |
| #ifdef SCSI_SINGLE_STEP |
| start_script_msg_ext=(unsigned long)&script_msg_ext[0]; |
| len_script_msg_ext=i*4; |
| #endif |
| i=0; |
| script_status[i++]=swap_script(SCR_MOVE_ABS (1) ^ SCR_STATUS); |
| script_status[i++]=swap_script(phys_to_bus(&pccb->status)); |
| script_status[i++]=swap_script(SCR_JUMP ^ IFTRUE (WHEN (SCR_MSG_IN))); |
| script_status[i++]=swap_script(phys_to_bus(&script_msgin[0])); |
| script_status[i++]=swap_script(SCR_INT); |
| script_status[i++]=SIR_STATUS_ILL_PH; |
| #ifdef SCSI_SINGLE_STEP |
| start_script_status=(unsigned long)&script_status[0]; |
| len_script_status=i*4; |
| #endif |
| i=0; |
| script_complete[i++]=swap_script(SCR_REG_REG (SCNTL2, SCR_AND, 0x7f)); |
| script_complete[i++]=0; |
| script_complete[i++]=swap_script(SCR_CLR (SCR_ACK|SCR_ATN)); |
| script_complete[i++]=0; |
| script_complete[i++]=swap_script(SCR_WAIT_DISC); |
| script_complete[i++]=0; |
| script_complete[i++]=swap_script(SCR_REG_REG(GPREG, SCR_OR, 0x01)); |
| script_complete[i++]=0; /* LED OFF */ |
| script_complete[i++]=swap_script(SCR_INT); |
| script_complete[i++]=SIR_COMPLETE; |
| #ifdef SCSI_SINGLE_STEP |
| start_script_complete=(unsigned long)&script_complete[0]; |
| len_script_complete=i*4; |
| #endif |
| i=0; |
| script_error[i++]=swap_script(SCR_INT); /* interrupt if error */ |
| script_error[i++]=SIR_SCRIPT_ERROR; |
| #ifdef SCSI_SINGLE_STEP |
| start_script_error=(unsigned long)&script_error[0]; |
| len_script_error=i*4; |
| #endif |
| i=0; |
| script_reselection[i++]=swap_script(SCR_CLR (SCR_TRG)); /* target status */ |
| script_reselection[i++]=0; |
| script_reselection[i++]=swap_script(SCR_WAIT_RESEL); |
| script_reselection[i++]=swap_script(phys_to_bus(&script_select[0])); /* len = 4 */ |
| #ifdef SCSI_SINGLE_STEP |
| start_script_reselection=(unsigned long)&script_reselection[0]; |
| len_script_reselection=i*4; |
| #endif |
| } |
| |
| |
| void scsi_issue(ccb *pccb) |
| { |
| int busdevfunc = pccb->priv; |
| int i; |
| unsigned short sstat; |
| int retrycnt; /* retry counter */ |
| for(i=0;i<3;i++) |
| int_stat[i]=0; /* delete all int status */ |
| /* struct pccb must be set-up correctly */ |
| retrycnt=0; |
| PRINTF("ID %d issue cmd %02X\n",pccb->target,pccb->cmd[0]); |
| pccb->trans_bytes=0; /* no bytes transfered yet */ |
| scsi_set_script(pccb); /* fill in SCRIPT */ |
| scsi_int_mask=STO | UDC | MA; /* | CMP; / * Interrupts which are enabled */ |
| script_int_mask=0xff; /* enable all Ints */ |
| scsi_int_enable(); |
| scsi_write_dsp(phys_to_bus(&script_select[0])); /* start script */ |
| /* now we have to wait for IRQs */ |
| retry: |
| /* |
| * This version of the driver is _not_ interrupt driven, |
| * but polls the chip's interrupt registers (ISTAT, DSTAT). |
| */ |
| while(int_stat[0]==0) |
| handle_scsi_int(); |
| |
| if(int_stat[0]==SIR_COMPLETE) { |
| if(pccb->msgin[0]==M_DISCONNECT) { |
| PRINTF("Wait for reselection\n"); |
| for(i=0;i<3;i++) |
| int_stat[i]=0; /* delete all int status */ |
| scsi_write_dsp(phys_to_bus(&script_reselection[0])); /* start reselection script */ |
| goto retry; |
| } |
| pccb->contr_stat=SIR_COMPLETE; |
| return; |
| } |
| if((int_stat[0] & SCSI_INT_STATE)==SCSI_INT_STATE) { /* scsi interrupt */ |
| sstat=(unsigned short)int_stat[0]; |
| if((sstat & STO)==STO) { /* selection timeout */ |
| pccb->contr_stat=SCSI_SEL_TIME_OUT; |
| scsi_write_byte(GPREG,0x01); |
| PRINTF("ID: %X Selection Timeout\n",pccb->target); |
| return; |
| } |
| if((sstat & UDC)==UDC) { /* unexpected disconnect */ |
| pccb->contr_stat=SCSI_UNEXP_DIS; |
| scsi_write_byte(GPREG,0x01); |
| PRINTF("ID: %X Unexpected Disconnect\n",pccb->target); |
| return; |
| } |
| if((sstat & RSL)==RSL) { /* reselection */ |
| pccb->contr_stat=SCSI_UNEXP_DIS; |
| scsi_write_byte(GPREG,0x01); |
| PRINTF("ID: %X Unexpected Disconnect\n",pccb->target); |
| return; |
| } |
| if(((sstat & MA)==MA)||((sstat & HTH)==HTH)) { /* phase missmatch */ |
| if(retrycnt<SCSI_MAX_RETRY) { |
| pccb->trans_bytes=pccb->datalen - |
| ((unsigned long)scsi_read_byte(DBC) | |
| ((unsigned long)scsi_read_byte(DBC+1)<<8) | |
| ((unsigned long)scsi_read_byte(DBC+2)<<16)); |
| for(i=0;i<3;i++) |
| int_stat[i]=0; /* delete all int status */ |
| retrycnt++; |
| PRINTF("ID: %X Phase Missmatch Retry %d Phase %02X transfered %lx\n", |
| pccb->target,retrycnt,scsi_read_byte(SBCL),pccb->trans_bytes); |
| scsi_write_dsp(phys_to_bus(&script_cmd[4])); /* start retry script */ |
| goto retry; |
| } |
| if((sstat & MA)==MA) |
| pccb->contr_stat=SCSI_MA_TIME_OUT; |
| else |
| pccb->contr_stat=SCSI_HNS_TIME_OUT; |
| PRINTF("Phase Missmatch stat %lx\n",pccb->contr_stat); |
| return; |
| } /* no phase int */ |
| /* if((sstat & CMP)==CMP) { |
| pccb->contr_stat=SIR_COMPLETE; |
| return; |
| } |
| */ |
| PRINTF("SCSI INT %lX\n",int_stat[0]); |
| pccb->contr_stat=int_stat[0]; |
| return; |
| } /* end scsi int */ |
| PRINTF("SCRIPT INT %lX phase %02X\n",int_stat[0],scsi_read_byte(SBCL)); |
| pccb->contr_stat=int_stat[0]; |
| return; |
| } |
| |
| int scsi_exec(ccb *pccb) |
| { |
| unsigned char tmpcmd[16],tmpstat; |
| int i,retrycnt,t; |
| unsigned long transbytes,datalen; |
| unsigned char *tmpptr; |
| retrycnt=0; |
| retry: |
| scsi_issue(pccb); |
| if(pccb->contr_stat!=SIR_COMPLETE) |
| return false; |
| if(pccb->status==S_GOOD) |
| return true; |
| if(pccb->status==S_CHECK_COND) { /* check condition */ |
| for(i=0;i<16;i++) |
| tmpcmd[i]=pccb->cmd[i]; |
| pccb->cmd[0]=SCSI_REQ_SENSE; |
| pccb->cmd[1]=pccb->lun<<5; |
| pccb->cmd[2]=0; |
| pccb->cmd[3]=0; |
| pccb->cmd[4]=14; |
| pccb->cmd[5]=0; |
| pccb->cmdlen=6; |
| pccb->msgout[0]=SCSI_IDENTIFY; |
| transbytes=pccb->trans_bytes; |
| tmpptr=pccb->pdata; |
| pccb->pdata = &pccb->sense_buf[0]; |
| datalen=pccb->datalen; |
| pccb->datalen=14; |
| tmpstat=pccb->status; |
| scsi_issue(pccb); |
| for(i=0;i<16;i++) |
| pccb->cmd[i]=tmpcmd[i]; |
| pccb->trans_bytes=transbytes; |
| pccb->pdata=tmpptr; |
| pccb->datalen=datalen; |
| pccb->status=tmpstat; |
| PRINTF("Request_sense sense key %x ASC %x ASCQ %x\n",pccb->sense_buf[2]&0x0f, |
| pccb->sense_buf[12],pccb->sense_buf[13]); |
| switch(pccb->sense_buf[2]&0xf) { |
| case SENSE_NO_SENSE: |
| case SENSE_RECOVERED_ERROR: |
| /* seems to be ok */ |
| return true; |
| break; |
| case SENSE_NOT_READY: |
| if((pccb->sense_buf[12]!=0x04)||(pccb->sense_buf[13]!=0x01)) { |
| /* if device is not in process of becoming ready */ |
| return false; |
| break; |
| } /* else fall through */ |
| case SENSE_UNIT_ATTENTION: |
| if(retrycnt<SCSI_MAX_RETRY_NOT_READY) { |
| PRINTF("Target %d not ready, retry %d\n",pccb->target,retrycnt); |
| for(t=0;t<SCSI_NOT_READY_TIME_OUT;t++) |
| udelay(1000); /* 1sec wait */ |
| retrycnt++; |
| goto retry; |
| } |
| PRINTF("Target %d not ready, %d retried\n",pccb->target,retrycnt); |
| return false; |
| default: |
| return false; |
| } |
| } |
| PRINTF("Status = %X\n",pccb->status); |
| return false; |
| } |
| |
| |
| void scsi_chip_init(void) |
| { |
| /* first we issue a soft reset */ |
| scsi_write_byte(ISTAT,SRST); |
| udelay(1000); |
| scsi_write_byte(ISTAT,0); |
| /* setup chip */ |
| scsi_write_byte(SCNTL0,0xC0); /* full arbitration no start, no message, parity disabled, master */ |
| scsi_write_byte(SCNTL1,0x00); |
| scsi_write_byte(SCNTL2,0x00); |
| #ifndef CONFIG_SYS_SCSI_SYM53C8XX_CCF /* config value for none 40 MHz clocks */ |
| scsi_write_byte(SCNTL3,0x13); /* synchronous clock 40/4=10MHz, asynchronous 40MHz */ |
| #else |
| scsi_write_byte(SCNTL3,CONFIG_SYS_SCSI_SYM53C8XX_CCF); /* config value for none 40 MHz clocks */ |
| #endif |
| scsi_write_byte(SCID,0x47); /* ID=7, enable reselection */ |
| scsi_write_byte(SXFER,0x00); /* synchronous transfer period 10MHz, asynchronous */ |
| scsi_write_byte(SDID,0x00); /* targed SCSI ID = 0 */ |
| scsi_int_mask=0x0000; /* no Interrupt is enabled */ |
| script_int_mask=0x00; |
| scsi_int_enable(); |
| scsi_write_byte(GPREG,0x01); /* GPIO0 is LED (off) */ |
| scsi_write_byte(GPCNTL,0x0E); /* GPIO0 is Output */ |
| scsi_write_byte(STIME0,0x08); /* handshake timer disabled, selection timeout 512msec */ |
| scsi_write_byte(RESPID,0x80); /* repond only to the own ID (reselection) */ |
| scsi_write_byte(STEST1,0x00); /* not isolated, SCLK is used */ |
| scsi_write_byte(STEST2,0x00); /* no Lowlevel Mode? */ |
| scsi_write_byte(STEST3,0x80); /* enable tolerANT */ |
| scsi_write_byte(CTEST3,0x04); /* clear FIFO */ |
| scsi_write_byte(CTEST4,0x00); |
| scsi_write_byte(CTEST5,0x00); |
| #ifdef SCSI_SINGLE_STEP |
| /* scsi_write_byte(DCNTL,IRQM | SSM); */ |
| scsi_write_byte(DCNTL,IRQD | SSM); |
| scsi_write_byte(DMODE,MAN); |
| #else |
| /* scsi_write_byte(DCNTL,IRQM); */ |
| scsi_write_byte(DCNTL,IRQD); |
| scsi_write_byte(DMODE,0x00); |
| #endif |
| } |
| #endif |