board/amcc/taishan/lcd.c - github/trini/u-boot - Gitiles

 /*
  * (C) Copyright 2007
  * Stefan Roese, DENX Software Engineering, sr@denx.de.
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */

 #include <config.h>
 #include <common.h>
 #include <command.h>
 #include <i2c.h>
 #include <miiphy.h>

 #ifdef CONFIG_TAISHAN

 #define LCD_DELAY_NORMAL_US	100
 #define LCD_DELAY_NORMAL_MS	2
 #define LCD_CMD_ADDR		((volatile char *)(CONFIG_SYS_EBC2_LCM_BASE))
 #define LCD_DATA_ADDR		((volatile char *)(CONFIG_SYS_EBC2_LCM_BASE+1))
 #define LCD_BLK_CTRL		((volatile char *)(CONFIG_SYS_EBC1_FPGA_BASE+0x2))

 static int g_lcd_init_b = 0;
 static char *amcc_logo = "  AMCC TAISHAN  440GX EvalBoard";
 static char addr_flag = 0x80;

 static void lcd_bl_ctrl(char val)
 {
 	char cpld_val;

 	cpld_val = *LCD_BLK_CTRL;
 	*LCD_BLK_CTRL = val | cpld_val;
 }

 static void lcd_putc(char val)
 {
 	int i = 100;
 	char addr;

 	while (i--) {
 		if ((*LCD_CMD_ADDR & 0x80) != 0x80) {	/*BF = 1 ? */
 			udelay(LCD_DELAY_NORMAL_US);
 			break;
 		}
 		udelay(LCD_DELAY_NORMAL_US);
 	}

 	if (*LCD_CMD_ADDR & 0x80) {
 		printf("LCD is busy\n");
 		return;
 	}

 	addr = *LCD_CMD_ADDR;
 	udelay(LCD_DELAY_NORMAL_US);
 	if ((addr != 0) && (addr % 0x10 == 0)) {
 		addr_flag ^= 0x40;
 		*LCD_CMD_ADDR = addr_flag;
 	}

 	udelay(LCD_DELAY_NORMAL_US);
 	*LCD_DATA_ADDR = val;
 	udelay(LCD_DELAY_NORMAL_US);
 }

 static void lcd_puts(char *s)
 {
 	char *p = s;
 	int i = 100;

 	while (i--) {
 		if ((*LCD_CMD_ADDR & 0x80) != 0x80) {	/*BF = 1 ? */
 			udelay(LCD_DELAY_NORMAL_US);
 			break;
 		}
 		udelay(LCD_DELAY_NORMAL_US);
 	}

 	if (*LCD_CMD_ADDR & 0x80) {
 		printf("LCD is busy\n");
 		return;
 	}

 	while (*p)
 		lcd_putc(*p++);
 }

 static void lcd_put_logo(void)
 {
 	int i = 100;
 	char *p = amcc_logo;

 	while (i--) {
 		if ((*LCD_CMD_ADDR & 0x80) != 0x80) {	/*BF = 1 ? */
 			udelay(LCD_DELAY_NORMAL_US);
 			break;
 		}
 		udelay(LCD_DELAY_NORMAL_US);
 	}

 	if (*LCD_CMD_ADDR & 0x80) {
 		printf("LCD is busy\n");
 		return;
 	}

 	*LCD_CMD_ADDR = 0x80;
 	while (*p)
 		lcd_putc(*p++);
 }

 int lcd_init(void)
 {
 	if (g_lcd_init_b == 0) {
 		puts("LCD: ");
 		mdelay(100);	/* Waiting for the LCD initialize */

 		*LCD_CMD_ADDR = 0x38;	/*set function:8-bit,2-line,5x7 font type */
 		udelay(LCD_DELAY_NORMAL_US);

 		*LCD_CMD_ADDR = 0x0f;	/*set display on,cursor on,blink on */
 		udelay(LCD_DELAY_NORMAL_US);

 		*LCD_CMD_ADDR = 0x01;	/*display clear */
 		mdelay(LCD_DELAY_NORMAL_MS);

 		*LCD_CMD_ADDR = 0x06;	/*set entry */
 		udelay(LCD_DELAY_NORMAL_US);

 		lcd_bl_ctrl(0x02);
 		lcd_put_logo();

 		puts("  ready\n");
 		g_lcd_init_b = 1;
 	}

 	return 0;
 }

 static int do_lcd_test(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
 {
 	lcd_init();
 	return 0;
 }

 static int do_lcd_clear(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
 {
 	*LCD_CMD_ADDR = 0x01;
 	mdelay(LCD_DELAY_NORMAL_MS);
 	return 0;
 }
 static int do_lcd_puts(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
 {
 	if (argc < 2)
 		return cmd_usage(cmdtp);

 	lcd_puts(argv[1]);
 	return 0;
 }
 static int do_lcd_putc(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
 {
 	if (argc < 2)
 		return cmd_usage(cmdtp);

 	lcd_putc((char)argv[1][0]);
 	return 0;
 }
 static int do_lcd_cur(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
 {
 	ulong count;
 	ulong dir;
 	char cur_addr;

 	if (argc < 3)
 		return cmd_usage(cmdtp);

 	count = simple_strtoul(argv[1], NULL, 16);
 	if (count > 31) {
 		printf("unable to shift > 0x20\n");
 		count = 0;
 	}

 	dir = simple_strtoul(argv[2], NULL, 16);
 	cur_addr = *LCD_CMD_ADDR;
 	udelay(LCD_DELAY_NORMAL_US);
 	if (dir == 0x0) {
 		if (addr_flag == 0x80) {
 			if (count >= (cur_addr & 0xf)) {
 				*LCD_CMD_ADDR = 0x80;
 				udelay(LCD_DELAY_NORMAL_US);
 				count = 0;
 			}
 		} else {
 			if (count >= ((cur_addr & 0x0f) + 0x0f)) {
 				*LCD_CMD_ADDR = 0x80;
 				addr_flag = 0x80;
 				udelay(LCD_DELAY_NORMAL_US);
 				count = 0x0;
 			} else if (count >= (cur_addr & 0xf)) {
 				count -= cur_addr & 0xf;
 				*LCD_CMD_ADDR = 0x80 | 0xf;
 				addr_flag = 0x80;
 				udelay(LCD_DELAY_NORMAL_US);
 			}
 		}
 	} else {
 		if (addr_flag == 0x80) {
 			if (count >= (0x1f - (cur_addr & 0xf))) {
 				count = 0x0;
 				addr_flag = 0xc0;
 				*LCD_CMD_ADDR = 0xc0 | 0xf;
 				udelay(LCD_DELAY_NORMAL_US);
 			} else if ((count + (cur_addr & 0xf)) >= 0x0f) {
 				count = count + (cur_addr & 0xf) - 0x0f;
 				addr_flag = 0xc0;
 				*LCD_CMD_ADDR = 0xc0;
 				udelay(LCD_DELAY_NORMAL_US);
 			}
 		} else if ((count + (cur_addr & 0xf)) >= 0x0f) {
 			count = 0x0;
 			*LCD_CMD_ADDR = 0xc0 | 0xf;
 			udelay(LCD_DELAY_NORMAL_US);
 		}
 	}

 	while (count--) {
 		if (dir == 0) {
 			*LCD_CMD_ADDR = 0x10;
 		} else {
 			*LCD_CMD_ADDR = 0x14;
 		}
 		udelay(LCD_DELAY_NORMAL_US);
 	}

 	return 0;
 }

 U_BOOT_CMD(lcd_test, 1, 1, do_lcd_test, "lcd test display", "");
 U_BOOT_CMD(lcd_cls, 1, 1, do_lcd_clear, "lcd clear display", "");
 U_BOOT_CMD(lcd_puts, 2, 1, do_lcd_puts,
 	   "display string on lcd",
 	   "<string> - <string> to be displayed");
 U_BOOT_CMD(lcd_putc, 2, 1, do_lcd_putc,
 	   "display char on lcd",
 	   "<char> - <char> to be displayed");
 U_BOOT_CMD(lcd_cur, 3, 1, do_lcd_cur,
 	   "shift cursor on lcd",
 	   "<count> <dir>- shift cursor on lcd <count> times, direction is <dir> \n"
 	   " <count> - 0~31\n" " <dir> - 0,backward; 1, forward");

 #if 0 /* test-only */
 void set_phy_loopback_mode(void)
 {
 	char devemac2[32];
 	char devemac3[32];

 	sprintf(devemac2, "%s2", CONFIG_EMAC_DEV_NAME);
 	sprintf(devemac3, "%s3", CONFIG_EMAC_DEV_NAME);

 #if 0
 	unsigned short reg_short;

 	miiphy_read(devemac2, 0x1, 1, &reg_short);
 	if (reg_short & 0x04) {
 		/*
 		 * printf("EMAC2 link up,do nothing\n");
 		 */
 	} else {
 		udelay(1000);
 		miiphy_write(devemac2, 0x1, 0, 0x6000);
 		udelay(1000);
 		miiphy_read(devemac2, 0x1, 0, &reg_short);
 		if (reg_short != 0x6000) {
 			printf
 			    ("\nEMAC2 error set LOOPBACK mode error,reg2[0]=%x\n",
 			     reg_short);
 		}
 	}

 	miiphy_read(devemac3, 0x3, 1, &reg_short);
 	if (reg_short & 0x04) {
 		/*
 		 * printf("EMAC3 link up,do nothing\n");
 		 */
 	} else {
 		udelay(1000);
 		miiphy_write(devemac3, 0x3, 0, 0x6000);
 		udelay(1000);
 		miiphy_read(devemac3, 0x3, 0, &reg_short);
 		if (reg_short != 0x6000) {
 			printf
 			    ("\nEMAC3 error set LOOPBACK mode error,reg2[0]=%x\n",
 			     reg_short);
 		}
 	}
 #else
 	/* Set PHY as LOOPBACK MODE, for Linux emac initializing */
 	miiphy_write(devemac2, CONFIG_PHY2_ADDR, 0, 0x6000);
 	udelay(1000);
 	miiphy_write(devemac3, CONFIG_PHY3_ADDR, 0, 0x6000);
 	udelay(1000);
 #endif	/* 0 */
 }

 void set_phy_normal_mode(void)
 {
 	char devemac2[32];
 	char devemac3[32];
 	unsigned short reg_short;

 	sprintf(devemac2, "%s2", CONFIG_EMAC_DEV_NAME);
 	sprintf(devemac3, "%s3", CONFIG_EMAC_DEV_NAME);

 	/* Set phy of EMAC2 */
 	miiphy_read(devemac2, CONFIG_PHY2_ADDR, 0x16, &reg_short);
 	reg_short &= ~(0x7);
 	reg_short |= 0x6;	/* RGMII DLL Delay */
 	miiphy_write(devemac2, CONFIG_PHY2_ADDR, 0x16, reg_short);

 	miiphy_read(devemac2, CONFIG_PHY2_ADDR, 0x17, &reg_short);
 	reg_short &= ~(0x40);
 	miiphy_write(devemac2, CONFIG_PHY2_ADDR, 0x17, reg_short);

 	miiphy_write(devemac2, CONFIG_PHY2_ADDR, 0x1c, 0x74f0);

 	/* Set phy of EMAC3 */
 	miiphy_read(devemac3, CONFIG_PHY3_ADDR, 0x16, &reg_short);
 	reg_short &= ~(0x7);
 	reg_short |= 0x6;	/* RGMII DLL Delay */
 	miiphy_write(devemac3, CONFIG_PHY3_ADDR, 0x16, reg_short);

 	miiphy_read(devemac3, CONFIG_PHY3_ADDR, 0x17, &reg_short);
 	reg_short &= ~(0x40);
 	miiphy_write(devemac3, CONFIG_PHY3_ADDR, 0x17, reg_short);

 	miiphy_write(devemac3, CONFIG_PHY3_ADDR, 0x1c, 0x74f0);
 }
 #endif	/* 0 - test only */

 static int do_led_test_off(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
 {
 	volatile unsigned int *GpioOr =
 		(volatile unsigned int *)(CONFIG_SYS_PERIPHERAL_BASE + 0x700);
 	*GpioOr |= 0x00300000;
 	return 0;
 }

 static int do_led_test_on(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
 {
 	volatile unsigned int *GpioOr =
 		(volatile unsigned int *)(CONFIG_SYS_PERIPHERAL_BASE + 0x700);
 	*GpioOr &= ~0x00300000;
 	return 0;
 }

 U_BOOT_CMD(ledon, 1, 1, do_led_test_on,
 	   "led test light on", "");

 U_BOOT_CMD(ledoff, 1, 1, do_led_test_off,
 	   "led test light off", "");
 #endif
	/*
	* (C) Copyright 2007
	* Stefan Roese, DENX Software Engineering, sr@denx.de.
	*
	* SPDX-License-Identifier: GPL-2.0+
	*/

	#include <config.h>
	#include <common.h>
	#include <command.h>
	#include <i2c.h>
	#include <miiphy.h>

	#ifdef CONFIG_TAISHAN

	#define LCD_DELAY_NORMAL_US 100
	#define LCD_DELAY_NORMAL_MS 2
	#define LCD_CMD_ADDR ((volatile char *)(CONFIG_SYS_EBC2_LCM_BASE))
	#define LCD_DATA_ADDR ((volatile char *)(CONFIG_SYS_EBC2_LCM_BASE+1))
	#define LCD_BLK_CTRL ((volatile char *)(CONFIG_SYS_EBC1_FPGA_BASE+0x2))

	static int g_lcd_init_b = 0;
	static char *amcc_logo = " AMCC TAISHAN 440GX EvalBoard";
	static char addr_flag = 0x80;

	static void lcd_bl_ctrl(char val)
	{
	char cpld_val;

	cpld_val = *LCD_BLK_CTRL;
	*LCD_BLK_CTRL = val \| cpld_val;
	}

	static void lcd_putc(char val)
	{
	int i = 100;
	char addr;

	while (i--) {
	if ((LCD_CMD_ADDR & 0x80) != 0x80) { /BF = 1 ? */
	udelay(LCD_DELAY_NORMAL_US);
	break;
	}
	udelay(LCD_DELAY_NORMAL_US);
	}

	if (*LCD_CMD_ADDR & 0x80) {
	printf("LCD is busy\n");
	return;
	}

	addr = *LCD_CMD_ADDR;
	udelay(LCD_DELAY_NORMAL_US);
	if ((addr != 0) && (addr % 0x10 == 0)) {
	addr_flag ^= 0x40;
	*LCD_CMD_ADDR = addr_flag;
	}

	udelay(LCD_DELAY_NORMAL_US);
	*LCD_DATA_ADDR = val;
	udelay(LCD_DELAY_NORMAL_US);
	}

	static void lcd_puts(char *s)
	{
	char *p = s;
	int i = 100;

	while (i--) {
	if ((LCD_CMD_ADDR & 0x80) != 0x80) { /BF = 1 ? */
	udelay(LCD_DELAY_NORMAL_US);
	break;
	}
	udelay(LCD_DELAY_NORMAL_US);
	}

	if (*LCD_CMD_ADDR & 0x80) {
	printf("LCD is busy\n");
	return;
	}

	while (*p)
	lcd_putc(*p++);
	}

	static void lcd_put_logo(void)
	{
	int i = 100;
	char *p = amcc_logo;

	while (i--) {
	if ((LCD_CMD_ADDR & 0x80) != 0x80) { /BF = 1 ? */
	udelay(LCD_DELAY_NORMAL_US);
	break;
	}
	udelay(LCD_DELAY_NORMAL_US);
	}

	if (*LCD_CMD_ADDR & 0x80) {
	printf("LCD is busy\n");
	return;
	}

	*LCD_CMD_ADDR = 0x80;
	while (*p)
	lcd_putc(*p++);
	}

	int lcd_init(void)
	{
	if (g_lcd_init_b == 0) {
	puts("LCD: ");
	mdelay(100); /* Waiting for the LCD initialize */

	LCD_CMD_ADDR = 0x38; /set function:8-bit,2-line,5x7 font type */
	udelay(LCD_DELAY_NORMAL_US);

	LCD_CMD_ADDR = 0x0f; /set display on,cursor on,blink on */
	udelay(LCD_DELAY_NORMAL_US);

	LCD_CMD_ADDR = 0x01; /display clear */
	mdelay(LCD_DELAY_NORMAL_MS);

	LCD_CMD_ADDR = 0x06; /set entry */
	udelay(LCD_DELAY_NORMAL_US);

	lcd_bl_ctrl(0x02);
	lcd_put_logo();

	puts(" ready\n");
	g_lcd_init_b = 1;
	}

	return 0;
	}

	static int do_lcd_test(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
	{
	lcd_init();
	return 0;
	}

	static int do_lcd_clear(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
	{
	*LCD_CMD_ADDR = 0x01;
	mdelay(LCD_DELAY_NORMAL_MS);
	return 0;
	}
	static int do_lcd_puts(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
	{
	if (argc < 2)
	return cmd_usage(cmdtp);

	lcd_puts(argv[1]);
	return 0;
	}
	static int do_lcd_putc(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
	{
	if (argc < 2)
	return cmd_usage(cmdtp);

	lcd_putc((char)argv[1][0]);
	return 0;
	}
	static int do_lcd_cur(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
	{
	ulong count;
	ulong dir;
	char cur_addr;

	if (argc < 3)
	return cmd_usage(cmdtp);

	count = simple_strtoul(argv[1], NULL, 16);
	if (count > 31) {
	printf("unable to shift > 0x20\n");
	count = 0;
	}

	dir = simple_strtoul(argv[2], NULL, 16);
	cur_addr = *LCD_CMD_ADDR;
	udelay(LCD_DELAY_NORMAL_US);
	if (dir == 0x0) {
	if (addr_flag == 0x80) {
	if (count >= (cur_addr & 0xf)) {
	*LCD_CMD_ADDR = 0x80;
	udelay(LCD_DELAY_NORMAL_US);
	count = 0;
	}
	} else {
	if (count >= ((cur_addr & 0x0f) + 0x0f)) {
	*LCD_CMD_ADDR = 0x80;
	addr_flag = 0x80;
	udelay(LCD_DELAY_NORMAL_US);
	count = 0x0;
	} else if (count >= (cur_addr & 0xf)) {
	count -= cur_addr & 0xf;
	*LCD_CMD_ADDR = 0x80 \| 0xf;
	addr_flag = 0x80;
	udelay(LCD_DELAY_NORMAL_US);
	}
	}
	} else {
	if (addr_flag == 0x80) {
	if (count >= (0x1f - (cur_addr & 0xf))) {
	count = 0x0;
	addr_flag = 0xc0;
	*LCD_CMD_ADDR = 0xc0 \| 0xf;
	udelay(LCD_DELAY_NORMAL_US);
	} else if ((count + (cur_addr & 0xf)) >= 0x0f) {
	count = count + (cur_addr & 0xf) - 0x0f;
	addr_flag = 0xc0;
	*LCD_CMD_ADDR = 0xc0;
	udelay(LCD_DELAY_NORMAL_US);
	}
	} else if ((count + (cur_addr & 0xf)) >= 0x0f) {
	count = 0x0;
	*LCD_CMD_ADDR = 0xc0 \| 0xf;
	udelay(LCD_DELAY_NORMAL_US);
	}
	}

	while (count--) {
	if (dir == 0) {
	*LCD_CMD_ADDR = 0x10;
	} else {
	*LCD_CMD_ADDR = 0x14;
	}
	udelay(LCD_DELAY_NORMAL_US);
	}

	return 0;
	}

	U_BOOT_CMD(lcd_test, 1, 1, do_lcd_test, "lcd test display", "");
	U_BOOT_CMD(lcd_cls, 1, 1, do_lcd_clear, "lcd clear display", "");
	U_BOOT_CMD(lcd_puts, 2, 1, do_lcd_puts,
	"display string on lcd",
	"<string> - <string> to be displayed");
	U_BOOT_CMD(lcd_putc, 2, 1, do_lcd_putc,
	"display char on lcd",
	"<char> - <char> to be displayed");
	U_BOOT_CMD(lcd_cur, 3, 1, do_lcd_cur,
	"shift cursor on lcd",
	"<count> <dir>- shift cursor on lcd <count> times, direction is <dir> \n"
	" <count> - 0~31\n" " <dir> - 0,backward; 1, forward");

	#if 0 /* test-only */
	void set_phy_loopback_mode(void)
	{
	char devemac2[32];
	char devemac3[32];

	sprintf(devemac2, "%s2", CONFIG_EMAC_DEV_NAME);
	sprintf(devemac3, "%s3", CONFIG_EMAC_DEV_NAME);

	#if 0
	unsigned short reg_short;

	miiphy_read(devemac2, 0x1, 1, &reg_short);
	if (reg_short & 0x04) {
	/*
	* printf("EMAC2 link up,do nothing\n");
	*/
	} else {
	udelay(1000);
	miiphy_write(devemac2, 0x1, 0, 0x6000);
	udelay(1000);
	miiphy_read(devemac2, 0x1, 0, &reg_short);
	if (reg_short != 0x6000) {
	printf
	("\nEMAC2 error set LOOPBACK mode error,reg2[0]=%x\n",
	reg_short);
	}
	}

	miiphy_read(devemac3, 0x3, 1, &reg_short);
	if (reg_short & 0x04) {
	/*
	* printf("EMAC3 link up,do nothing\n");
	*/
	} else {
	udelay(1000);
	miiphy_write(devemac3, 0x3, 0, 0x6000);
	udelay(1000);
	miiphy_read(devemac3, 0x3, 0, &reg_short);
	if (reg_short != 0x6000) {
	printf
	("\nEMAC3 error set LOOPBACK mode error,reg2[0]=%x\n",
	reg_short);
	}
	}
	#else
	/* Set PHY as LOOPBACK MODE, for Linux emac initializing */
	miiphy_write(devemac2, CONFIG_PHY2_ADDR, 0, 0x6000);
	udelay(1000);
	miiphy_write(devemac3, CONFIG_PHY3_ADDR, 0, 0x6000);
	udelay(1000);
	#endif /* 0 */
	}

	void set_phy_normal_mode(void)
	{
	char devemac2[32];
	char devemac3[32];
	unsigned short reg_short;

	sprintf(devemac2, "%s2", CONFIG_EMAC_DEV_NAME);
	sprintf(devemac3, "%s3", CONFIG_EMAC_DEV_NAME);

	/* Set phy of EMAC2 */
	miiphy_read(devemac2, CONFIG_PHY2_ADDR, 0x16, &reg_short);
	reg_short &= ~(0x7);
	reg_short \|= 0x6; /* RGMII DLL Delay */
	miiphy_write(devemac2, CONFIG_PHY2_ADDR, 0x16, reg_short);

	miiphy_read(devemac2, CONFIG_PHY2_ADDR, 0x17, &reg_short);
	reg_short &= ~(0x40);
	miiphy_write(devemac2, CONFIG_PHY2_ADDR, 0x17, reg_short);

	miiphy_write(devemac2, CONFIG_PHY2_ADDR, 0x1c, 0x74f0);

	/* Set phy of EMAC3 */
	miiphy_read(devemac3, CONFIG_PHY3_ADDR, 0x16, &reg_short);
	reg_short &= ~(0x7);
	reg_short \|= 0x6; /* RGMII DLL Delay */
	miiphy_write(devemac3, CONFIG_PHY3_ADDR, 0x16, reg_short);

	miiphy_read(devemac3, CONFIG_PHY3_ADDR, 0x17, &reg_short);
	reg_short &= ~(0x40);
	miiphy_write(devemac3, CONFIG_PHY3_ADDR, 0x17, reg_short);

	miiphy_write(devemac3, CONFIG_PHY3_ADDR, 0x1c, 0x74f0);
	}
	#endif /* 0 - test only */

	static int do_led_test_off(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
	{
	volatile unsigned int *GpioOr =
	(volatile unsigned int *)(CONFIG_SYS_PERIPHERAL_BASE + 0x700);
	*GpioOr \|= 0x00300000;
	return 0;
	}

	static int do_led_test_on(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
	{
	volatile unsigned int *GpioOr =
	(volatile unsigned int *)(CONFIG_SYS_PERIPHERAL_BASE + 0x700);
	*GpioOr &= ~0x00300000;
	return 0;
	}

	U_BOOT_CMD(ledon, 1, 1, do_led_test_on,
	"led test light on", "");

	U_BOOT_CMD(ledoff, 1, 1, do_led_test_off,
	"led test light off", "");
	#endif