| /* |
| * (C) Copyright 2009 Faraday Technology |
| * Po-Yu Chuang <ratbert@faraday-tech.com> |
| * |
| * Configuation settings for the Faraday A320 board. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| */ |
| |
| #ifndef __CONFIG_H |
| #define __CONFIG_H |
| |
| #include <asm/arch/a320.h> |
| |
| /*----------------------------------------------------------------------- |
| * CPU and Board Configuration Options |
| */ |
| #undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ |
| |
| #undef CONFIG_SKIP_LOWLEVEL_INIT |
| |
| /*----------------------------------------------------------------------- |
| * Power Management Unit |
| */ |
| #define CONFIG_FTPMU010_POWER |
| |
| /*----------------------------------------------------------------------- |
| * Timer |
| */ |
| #define CONFIG_SYS_HZ 1000 /* timer ticks per second */ |
| |
| /*----------------------------------------------------------------------- |
| * Real Time Clock |
| */ |
| #define CONFIG_RTC_FTRTC010 |
| |
| /*----------------------------------------------------------------------- |
| * Serial console configuration |
| */ |
| |
| /* FTUART is a high speed NS 16C550A compatible UART */ |
| #define CONFIG_BAUDRATE 38400 |
| #define CONFIG_CONS_INDEX 1 |
| #define CONFIG_SYS_NS16550 |
| #define CONFIG_SYS_NS16550_SERIAL |
| #define CONFIG_SYS_NS16550_COM1 0x98200000 |
| #define CONFIG_SYS_NS16550_REG_SIZE -4 |
| #define CONFIG_SYS_NS16550_CLK 18432000 |
| |
| /* valid baudrates */ |
| #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } |
| |
| /*----------------------------------------------------------------------- |
| * Ethernet |
| */ |
| #define CONFIG_NET_MULTI |
| #define CONFIG_FTMAC100 |
| |
| #define CONFIG_BOOTDELAY 3 |
| |
| /*----------------------------------------------------------------------- |
| * Command line configuration. |
| */ |
| #include <config_cmd_default.h> |
| |
| #define CONFIG_CMD_CACHE |
| #define CONFIG_CMD_DATE |
| #define CONFIG_CMD_PING |
| |
| /*----------------------------------------------------------------------- |
| * Miscellaneous configurable options |
| */ |
| #define CONFIG_SYS_LONGHELP /* undef to save memory */ |
| #define CONFIG_SYS_PROMPT "A320 # " /* Monitor Command Prompt */ |
| #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ |
| |
| /* Print Buffer Size */ |
| #define CONFIG_SYS_PBSIZE \ |
| (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) |
| |
| /* max number of command args */ |
| #define CONFIG_SYS_MAXARGS 16 |
| |
| /* Boot Argument Buffer Size */ |
| #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE |
| |
| /*----------------------------------------------------------------------- |
| * Stack sizes |
| * |
| * The stack sizes are set up in start.S using the settings below |
| */ |
| #define CONFIG_STACKSIZE (128 * 1024) /* regular stack */ |
| #ifdef CONFIG_USE_IRQ |
| #define CONFIG_STACKSIZE_IRQ (4 * 1024) /* IRQ stack */ |
| #define CONFIG_STACKSIZE_FIQ (4 * 1024) /* FIQ stack */ |
| #endif |
| |
| /*----------------------------------------------------------------------- |
| * Size of malloc() pool |
| */ |
| #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128 * 1024) |
| |
| /*----------------------------------------------------------------------- |
| * SDRAM controller configuration |
| */ |
| #define CONFIG_SYS_FTSDMC020_TP0 (FTSDMC020_TP0_TRAS(2) | \ |
| FTSDMC020_TP0_TRP(1) | \ |
| FTSDMC020_TP0_TRCD(1) | \ |
| FTSDMC020_TP0_TRF(3) | \ |
| FTSDMC020_TP0_TWR(1) | \ |
| FTSDMC020_TP0_TCL(2)) |
| |
| #define CONFIG_SYS_FTSDMC020_TP1 (FTSDMC020_TP1_INI_PREC(4) | \ |
| FTSDMC020_TP1_INI_REFT(8) | \ |
| FTSDMC020_TP1_REF_INTV(0x180)) |
| |
| #define CONFIG_SYS_FTSDMC020_BANK0_BSR (FTSDMC020_BANK_ENABLE | \ |
| FTSDMC020_BANK_DDW_X16 | \ |
| FTSDMC020_BANK_DSZ_256M | \ |
| FTSDMC020_BANK_MBW_32 | \ |
| FTSDMC020_BANK_SIZE_64M) |
| |
| /*----------------------------------------------------------------------- |
| * Physical Memory Map |
| */ |
| #define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ |
| #define PHYS_SDRAM_1 0x10000000 /* SDRAM Bank #1 */ |
| #define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */ |
| |
| #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 |
| #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000 - \ |
| GENERATED_GBL_DATA_SIZE) |
| |
| /* |
| * Load address and memory test area should agree with |
| * board/faraday/a320/config.mk. Be careful not to overwrite U-boot itself. |
| */ |
| #define CONFIG_SYS_LOAD_ADDR (PHYS_SDRAM_1 + 0x2000000) |
| |
| /* memtest works on 63 MB in DRAM */ |
| #define CONFIG_SYS_MEMTEST_START PHYS_SDRAM_1 |
| #define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_1 + 0x3F00000) |
| |
| #define CONFIG_SYS_TEXT_BASE 0 |
| |
| /*----------------------------------------------------------------------- |
| * Static memory controller configuration |
| */ |
| |
| #define CONFIG_FTSMC020 |
| #include <faraday/ftsmc020.h> |
| |
| #define FTSMC020_BANK0_CONFIG (FTSMC020_BANK_ENABLE | \ |
| FTSMC020_BANK_BASE(PHYS_FLASH_1) | \ |
| FTSMC020_BANK_SIZE_1M | \ |
| FTSMC020_BANK_MBW_8) |
| |
| #define FTSMC020_BANK0_TIMING (FTSMC020_TPR_RBE | \ |
| FTSMC020_TPR_AST(3) | \ |
| FTSMC020_TPR_CTW(3) | \ |
| FTSMC020_TPR_ATI(0xf) | \ |
| FTSMC020_TPR_AT2(3) | \ |
| FTSMC020_TPR_WTC(3) | \ |
| FTSMC020_TPR_AHT(3) | \ |
| FTSMC020_TPR_TRNA(0xf)) |
| |
| #define FTSMC020_BANK1_CONFIG (FTSMC020_BANK_ENABLE | \ |
| FTSMC020_BANK_BASE(PHYS_FLASH_2) | \ |
| FTSMC020_BANK_SIZE_32M | \ |
| FTSMC020_BANK_MBW_32) |
| |
| #define FTSMC020_BANK1_TIMING (FTSMC020_TPR_AST(3) | \ |
| FTSMC020_TPR_CTW(3) | \ |
| FTSMC020_TPR_ATI(0xf) | \ |
| FTSMC020_TPR_AT2(3) | \ |
| FTSMC020_TPR_WTC(3) | \ |
| FTSMC020_TPR_AHT(3) | \ |
| FTSMC020_TPR_TRNA(0xf)) |
| |
| #define CONFIG_SYS_FTSMC020_CONFIGS { \ |
| { FTSMC020_BANK0_CONFIG, FTSMC020_BANK0_TIMING, }, \ |
| { FTSMC020_BANK1_CONFIG, FTSMC020_BANK1_TIMING, }, \ |
| } |
| |
| /*----------------------------------------------------------------------- |
| * FLASH and environment organization |
| */ |
| |
| /* use CFI framework */ |
| #define CONFIG_SYS_FLASH_CFI |
| #define CONFIG_FLASH_CFI_DRIVER |
| |
| /* support JEDEC */ |
| #define CONFIG_FLASH_CFI_LEGACY |
| #define CONFIG_SYS_FLASH_LEGACY_512Kx8 |
| |
| #define PHYS_FLASH_1 0x00000000 |
| #define PHYS_FLASH_2 0x00400000 |
| #define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 |
| #define CONFIG_SYS_FLASH_BANKS_LIST { PHYS_FLASH_1, PHYS_FLASH_2, } |
| |
| #define CONFIG_SYS_MONITOR_BASE PHYS_FLASH_1 |
| |
| /* max number of memory banks */ |
| #define CONFIG_SYS_MAX_FLASH_BANKS 2 |
| |
| /* max number of sectors on one chip */ |
| #define CONFIG_SYS_MAX_FLASH_SECT 512 |
| |
| #undef CONFIG_SYS_FLASH_EMPTY_INFO |
| |
| /* environments */ |
| #define CONFIG_ENV_IS_IN_FLASH |
| #define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0x60000) |
| #define CONFIG_ENV_SIZE 0x20000 |
| |
| #endif /* __CONFIG_H */ |