| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Synopsys DesignWare Multimedia Card Interface driver |
| * extensions used in various Synopsys ARC devboards. |
| * |
| * Copyright (C) 2019 Synopsys |
| * Author: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> |
| */ |
| |
| #include <common.h> |
| #include <clk.h> |
| #include <dm.h> |
| #include <dwmmc.h> |
| #include <errno.h> |
| #include <fdtdec.h> |
| #include <dm/device_compat.h> |
| #include <linux/libfdt.h> |
| #include <linux/err.h> |
| #include <malloc.h> |
| |
| #define CLOCK_MIN 400000 /* 400 kHz */ |
| #define FIFO_MIN 8 |
| #define FIFO_MAX 4096 |
| |
| struct snps_dwmci_plat { |
| struct mmc_config cfg; |
| struct mmc mmc; |
| }; |
| |
| struct snps_dwmci_priv_data { |
| struct dwmci_host host; |
| u32 f_max; |
| }; |
| |
| static int snps_dwmmc_clk_setup(struct udevice *dev) |
| { |
| struct snps_dwmci_priv_data *priv = dev_get_priv(dev); |
| struct dwmci_host *host = &priv->host; |
| |
| struct clk clk_ciu, clk_biu; |
| int ret; |
| |
| ret = clk_get_by_name(dev, "ciu", &clk_ciu); |
| if (ret) |
| goto clk_err; |
| |
| ret = clk_enable(&clk_ciu); |
| if (ret && ret != -ENOSYS && ret != -ENOTSUPP) |
| goto clk_err; |
| |
| host->bus_hz = clk_get_rate(&clk_ciu); |
| if (host->bus_hz < CLOCK_MIN) { |
| ret = -EINVAL; |
| goto clk_err_ciu_dis; |
| } |
| |
| ret = clk_get_by_name(dev, "biu", &clk_biu); |
| if (ret) |
| goto clk_err_ciu_dis; |
| |
| ret = clk_enable(&clk_biu); |
| if (ret && ret != -ENOSYS && ret != -ENOTSUPP) |
| goto clk_err_ciu_dis; |
| |
| return 0; |
| |
| clk_err_ciu_dis: |
| clk_disable(&clk_ciu); |
| clk_err: |
| dev_err(dev, "failed to setup clocks, ret %d\n", ret); |
| |
| return ret; |
| } |
| |
| static int snps_dwmmc_of_to_plat(struct udevice *dev) |
| { |
| struct snps_dwmci_priv_data *priv = dev_get_priv(dev); |
| struct dwmci_host *host = &priv->host; |
| u32 fifo_depth; |
| int ret; |
| |
| host->ioaddr = dev_read_addr_ptr(dev); |
| |
| /* |
| * If fifo-depth is unset don't set fifoth_val - we will try to |
| * auto detect it. |
| */ |
| ret = dev_read_u32(dev, "fifo-depth", &fifo_depth); |
| if (!ret) { |
| if (fifo_depth < FIFO_MIN || fifo_depth > FIFO_MAX) |
| return -EINVAL; |
| |
| host->fifoth_val = MSIZE(0x2) | |
| RX_WMARK(fifo_depth / 2 - 1) | |
| TX_WMARK(fifo_depth / 2); |
| } |
| |
| host->buswidth = dev_read_u32_default(dev, "bus-width", 4); |
| if (host->buswidth != 1 && host->buswidth != 4 && host->buswidth != 8) |
| return -EINVAL; |
| |
| /* |
| * If max-frequency is unset don't set priv->f_max - we will use |
| * host->bus_hz in probe() instead. |
| */ |
| ret = dev_read_u32(dev, "max-frequency", &priv->f_max); |
| if (!ret && priv->f_max < CLOCK_MIN) |
| return -EINVAL; |
| |
| host->fifo_mode = dev_read_bool(dev, "fifo-mode"); |
| host->name = dev->name; |
| host->dev_index = 0; |
| host->priv = priv; |
| |
| return 0; |
| } |
| |
| int snps_dwmmc_getcd(struct udevice *dev) |
| { |
| struct snps_dwmci_priv_data *priv = dev_get_priv(dev); |
| struct dwmci_host *host = &priv->host; |
| |
| return !(dwmci_readl(host, DWMCI_CDETECT) & 1); |
| } |
| |
| struct dm_mmc_ops snps_dwmci_dm_ops; |
| |
| static int snps_dwmmc_probe(struct udevice *dev) |
| { |
| #ifdef CONFIG_BLK |
| struct snps_dwmci_plat *plat = dev_get_plat(dev); |
| #endif |
| struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev); |
| struct snps_dwmci_priv_data *priv = dev_get_priv(dev); |
| struct dwmci_host *host = &priv->host; |
| unsigned int clock_max; |
| int ret; |
| |
| /* Extend generic 'dm_dwmci_ops' with our 'getcd' implementation */ |
| memcpy(&snps_dwmci_dm_ops, &dm_dwmci_ops, sizeof(struct dm_mmc_ops)); |
| snps_dwmci_dm_ops.get_cd = snps_dwmmc_getcd; |
| |
| ret = snps_dwmmc_clk_setup(dev); |
| if (ret) |
| return ret; |
| |
| if (!priv->f_max) |
| clock_max = host->bus_hz; |
| else |
| clock_max = min_t(unsigned int, host->bus_hz, priv->f_max); |
| |
| #ifdef CONFIG_BLK |
| dwmci_setup_cfg(&plat->cfg, host, clock_max, CLOCK_MIN); |
| host->mmc = &plat->mmc; |
| #else |
| ret = add_dwmci(host, clock_max, CLOCK_MIN); |
| if (ret) |
| return ret; |
| #endif |
| host->mmc->priv = &priv->host; |
| upriv->mmc = host->mmc; |
| host->mmc->dev = dev; |
| |
| return dwmci_probe(dev); |
| } |
| |
| static int snps_dwmmc_bind(struct udevice *dev) |
| { |
| #ifdef CONFIG_BLK |
| struct snps_dwmci_plat *plat = dev_get_plat(dev); |
| int ret; |
| |
| ret = dwmci_bind(dev, &plat->mmc, &plat->cfg); |
| if (ret) |
| return ret; |
| #endif |
| |
| return 0; |
| } |
| |
| static const struct udevice_id snps_dwmmc_ids[] = { |
| { .compatible = "snps,dw-mshc" }, |
| { } |
| }; |
| |
| U_BOOT_DRIVER(snps_dwmmc_drv) = { |
| .name = "snps_dw_mmc", |
| .id = UCLASS_MMC, |
| .of_match = snps_dwmmc_ids, |
| .of_to_plat = snps_dwmmc_of_to_plat, |
| .ops = &snps_dwmci_dm_ops, |
| .bind = snps_dwmmc_bind, |
| .probe = snps_dwmmc_probe, |
| .priv_auto = sizeof(struct snps_dwmci_priv_data), |
| .plat_auto = sizeof(struct snps_dwmci_plat), |
| }; |