| /**************************************************************************** |
| * |
| * BIOS emulator and interface |
| * to Realmode X86 Emulator Library |
| * |
| * Copyright (C) 2007 Freescale Semiconductor, Inc. |
| * Jason Jin <Jason.jin@freescale.com> |
| * |
| * Copyright (C) 1996-1999 SciTech Software, Inc. |
| * |
| * ======================================================================== |
| * |
| * Permission to use, copy, modify, distribute, and sell this software and |
| * its documentation for any purpose is hereby granted without fee, |
| * provided that the above copyright notice appear in all copies and that |
| * both that copyright notice and this permission notice appear in |
| * supporting documentation, and that the name of the authors not be used |
| * in advertising or publicity pertaining to distribution of the software |
| * without specific, written prior permission. The authors makes no |
| * representations about the suitability of this software for any purpose. |
| * It is provided "as is" without express or implied warranty. |
| * |
| * THE AUTHORS DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, |
| * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO |
| * EVENT SHALL THE AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT OR |
| * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF |
| * USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR |
| * OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR |
| * PERFORMANCE OF THIS SOFTWARE. |
| * |
| * ======================================================================== |
| * |
| * Language: ANSI C |
| * Environment: Any |
| * Developer: Kendall Bennett |
| * |
| * Description: Module implementing the system specific functions. This |
| * module is always compiled and linked in the OS depedent |
| * libraries, and never in a binary portable driver. |
| * |
| * Jason ported this file to u-boot to run the ATI video card BIOS |
| * in u-boot. Made all the video memory be emulated during the |
| * BIOS runing process which may affect the VGA function but the |
| * frambuffer function can work after run the BIOS. |
| * |
| ****************************************************************************/ |
| |
| #include <malloc.h> |
| #include "biosemui.h" |
| |
| BE_sysEnv _BE_env = {{0}}; |
| static X86EMU_memFuncs _BE_mem __section(GOT2_TYPE) = { |
| BE_rdb, |
| BE_rdw, |
| BE_rdl, |
| BE_wrb, |
| BE_wrw, |
| BE_wrl, |
| }; |
| |
| static X86EMU_pioFuncs _BE_pio __section(GOT2_TYPE) = { |
| BE_inb, |
| BE_inw, |
| BE_inl, |
| BE_outb, |
| BE_outw, |
| BE_outl, |
| }; |
| |
| #define OFF(addr) (u16)(((addr) >> 0) & 0xffff) |
| #define SEG(addr) (u16)(((addr) >> 4) & 0xf000) |
| |
| /**************************************************************************** |
| PARAMETERS: |
| debugFlags - Flags to enable debugging options (debug builds only) |
| memSize - Amount of memory to allocate for real mode machine |
| info - Pointer to default VGA device information |
| |
| REMARKS: |
| This functions initialises the BElib, and uses the passed in |
| BIOS image as the BIOS that is used and emulated at 0xC0000. |
| ****************************************************************************/ |
| int X86API BE_init(u32 debugFlags, int memSize, BE_VGAInfo * info, int shared) |
| { |
| #if !defined(__DRIVER__) && !defined(__KERNEL__) |
| |
| PM_init(); |
| #endif |
| memset(&M, 0, sizeof(M)); |
| if (memSize < 20480){ |
| printf("Emulator requires at least 20Kb of memory!\n"); |
| return 0; |
| } |
| |
| M.mem_base = malloc(memSize); |
| |
| if (M.mem_base == NULL){ |
| printf("Biosemu:Out of memory!"); |
| return 0; |
| } |
| M.mem_size = memSize; |
| |
| _BE_env.emulateVGA = 0; |
| _BE_env.busmem_base = (unsigned long)malloc(128 * 1024); |
| if ((void *)_BE_env.busmem_base == NULL){ |
| printf("Biosemu:Out of memory!"); |
| return 0; |
| } |
| M.x86.debug = debugFlags; |
| _BE_bios_init((u32*)info->LowMem); |
| X86EMU_setupMemFuncs(&_BE_mem); |
| X86EMU_setupPioFuncs(&_BE_pio); |
| BE_setVGA(info); |
| return 1; |
| } |
| |
| /**************************************************************************** |
| PARAMETERS: |
| info - Pointer to VGA device information to make current |
| |
| REMARKS: |
| This function sets the VGA BIOS functions in the emulator to point to the |
| specific VGA BIOS in use. This includes swapping the BIOS interrupt |
| vectors, BIOS image and BIOS data area to the new BIOS. This allows the |
| real mode BIOS to be swapped without resetting the entire emulator. |
| ****************************************************************************/ |
| void X86API BE_setVGA(BE_VGAInfo * info) |
| { |
| |
| #ifdef __KERNEL__ |
| _BE_env.vgaInfo.function = info->function; |
| _BE_env.vgaInfo.device = info->device; |
| _BE_env.vgaInfo.bus = info->bus; |
| _BE_env.vgaInfo.pcidev = info->pcidev; |
| #else |
| _BE_env.vgaInfo.pciInfo = info->pciInfo; |
| #endif |
| _BE_env.vgaInfo.BIOSImage = info->BIOSImage; |
| if (info->BIOSImage) { |
| _BE_env.biosmem_base = (ulong) info->BIOSImage; |
| _BE_env.biosmem_limit = 0xC0000 + info->BIOSImageLen - 1; |
| } else { |
| _BE_env.biosmem_base = _BE_env.busmem_base + 0x20000; |
| _BE_env.biosmem_limit = 0xC7FFF; |
| } |
| if ((info->LowMem[0] == 0) && (info->LowMem[1] == 0) && |
| (info->LowMem[2] == 0) && (info->LowMem[3] == 0)) |
| _BE_bios_init((u32 *) info->LowMem); |
| memcpy((u8 *) M.mem_base, info->LowMem, sizeof(info->LowMem)); |
| } |
| |
| /**************************************************************************** |
| PARAMETERS: |
| info - Pointer to VGA device information to retrieve current |
| |
| REMARKS: |
| This function returns the VGA BIOS functions currently active in the |
| emulator, so they can be restored at a later date. |
| ****************************************************************************/ |
| void X86API BE_getVGA(BE_VGAInfo * info) |
| { |
| #ifdef __KERNEL__ |
| info->function = _BE_env.vgaInfo.function; |
| info->device = _BE_env.vgaInfo.device; |
| info->bus = _BE_env.vgaInfo.bus; |
| info->pcidev = _BE_env.vgaInfo.pcidev; |
| #else |
| info->pciInfo = _BE_env.vgaInfo.pciInfo; |
| #endif |
| info->BIOSImage = _BE_env.vgaInfo.BIOSImage; |
| memcpy(info->LowMem, (u8 *) M.mem_base, sizeof(info->LowMem)); |
| } |
| |
| /**************************************************************************** |
| PARAMETERS: |
| r_seg - Segment for pointer to convert |
| r_off - Offset for pointer to convert |
| |
| REMARKS: |
| This function maps a real mode pointer in the emulator memory to a protected |
| mode pointer that can be used to directly access the memory. |
| |
| NOTE: The memory is *always* in little endian format, son on non-x86 |
| systems you will need to do endian translations to access this |
| memory. |
| ****************************************************************************/ |
| void *X86API BE_mapRealPointer(uint r_seg, uint r_off) |
| { |
| u32 addr = ((u32) r_seg << 4) + r_off; |
| |
| if (addr >= 0xC0000 && addr <= _BE_env.biosmem_limit) { |
| return (void *)(_BE_env.biosmem_base + addr - 0xC0000); |
| } else if (addr >= 0xA0000 && addr <= 0xFFFFF) { |
| return (void *)(_BE_env.busmem_base + addr - 0xA0000); |
| } |
| return (void *)(M.mem_base + addr); |
| } |
| |
| /**************************************************************************** |
| PARAMETERS: |
| len - Return the length of the VESA buffer |
| rseg - Place to store VESA buffer segment |
| roff - Place to store VESA buffer offset |
| |
| REMARKS: |
| This function returns the address of the VESA transfer buffer in real |
| _BE_piomode emulator memory. The VESA transfer buffer is always 1024 bytes long, |
| and located at 15Kb into the start of the real mode memory (16Kb is where |
| we put the real mode code we execute for issuing interrupts). |
| |
| NOTE: The memory is *always* in little endian format, son on non-x86 |
| systems you will need to do endian translations to access this |
| memory. |
| ****************************************************************************/ |
| void *X86API BE_getVESABuf(uint * len, uint * rseg, uint * roff) |
| { |
| *len = 1024; |
| *rseg = SEG(0x03C00); |
| *roff = OFF(0x03C00); |
| return (void *)(M.mem_base + ((u32) * rseg << 4) + *roff); |
| } |
| |
| /**************************************************************************** |
| REMARKS: |
| Cleans up and exits the emulator. |
| ****************************************************************************/ |
| void X86API BE_exit(void) |
| { |
| free(M.mem_base); |
| free((void *)_BE_env.busmem_base); |
| } |
| |
| /**************************************************************************** |
| PARAMETERS: |
| seg - Segment of code to call |
| off - Offset of code to call |
| regs - Real mode registers to load |
| sregs - Real mode segment registers to load |
| |
| REMARKS: |
| This functions calls a real mode far function at the specified address, |
| and loads all the x86 registers from the passed in registers structure. |
| On exit the registers returned from the call are returned in the same |
| structures. |
| ****************************************************************************/ |
| void X86API BE_callRealMode(uint seg, uint off, RMREGS * regs, RMSREGS * sregs) |
| { |
| M.x86.R_EAX = regs->e.eax; |
| M.x86.R_EBX = regs->e.ebx; |
| M.x86.R_ECX = regs->e.ecx; |
| M.x86.R_EDX = regs->e.edx; |
| M.x86.R_ESI = regs->e.esi; |
| M.x86.R_EDI = regs->e.edi; |
| M.x86.R_DS = sregs->ds; |
| M.x86.R_ES = sregs->es; |
| M.x86.R_FS = sregs->fs; |
| M.x86.R_GS = sregs->gs; |
| |
| ((u8 *) M.mem_base)[0x4000] = 0x9A; |
| ((u8 *) M.mem_base)[0x4001] = (u8) off; |
| ((u8 *) M.mem_base)[0x4002] = (u8) (off >> 8); |
| ((u8 *) M.mem_base)[0x4003] = (u8) seg; |
| ((u8 *) M.mem_base)[0x4004] = (u8) (seg >> 8); |
| ((u8 *) M.mem_base)[0x4005] = 0xF1; /* Illegal op-code */ |
| M.x86.R_CS = SEG(0x04000); |
| M.x86.R_IP = OFF(0x04000); |
| |
| M.x86.R_SS = SEG(M.mem_size - 2); |
| M.x86.R_SP = OFF(M.mem_size - 2) + 2; |
| |
| X86EMU_exec(); |
| |
| regs->e.cflag = M.x86.R_EFLG & F_CF; |
| regs->e.eax = M.x86.R_EAX; |
| regs->e.ebx = M.x86.R_EBX; |
| regs->e.ecx = M.x86.R_ECX; |
| regs->e.edx = M.x86.R_EDX; |
| regs->e.esi = M.x86.R_ESI; |
| regs->e.edi = M.x86.R_EDI; |
| sregs->ds = M.x86.R_DS; |
| sregs->es = M.x86.R_ES; |
| sregs->fs = M.x86.R_FS; |
| sregs->gs = M.x86.R_GS; |
| } |
| |
| /**************************************************************************** |
| PARAMETERS: |
| intno - Interrupt number to execute |
| in - Real mode registers to load |
| out - Place to store resulting real mode registers |
| |
| REMARKS: |
| This functions calls a real mode interrupt function at the specified address, |
| and loads all the x86 registers from the passed in registers structure. |
| On exit the registers returned from the call are returned in out stucture. |
| ****************************************************************************/ |
| int X86API BE_int86(int intno, RMREGS * in, RMREGS * out) |
| { |
| M.x86.R_EAX = in->e.eax; |
| M.x86.R_EBX = in->e.ebx; |
| M.x86.R_ECX = in->e.ecx; |
| M.x86.R_EDX = in->e.edx; |
| M.x86.R_ESI = in->e.esi; |
| M.x86.R_EDI = in->e.edi; |
| ((u8 *) M.mem_base)[0x4000] = 0xCD; |
| ((u8 *) M.mem_base)[0x4001] = (u8) intno; |
| ((u8 *) M.mem_base)[0x4002] = 0xF1; |
| M.x86.R_CS = SEG(0x04000); |
| M.x86.R_IP = OFF(0x04000); |
| |
| M.x86.R_SS = SEG(M.mem_size - 1); |
| M.x86.R_SP = OFF(M.mem_size - 1) - 1; |
| |
| X86EMU_exec(); |
| out->e.cflag = M.x86.R_EFLG & F_CF; |
| out->e.eax = M.x86.R_EAX; |
| out->e.ebx = M.x86.R_EBX; |
| out->e.ecx = M.x86.R_ECX; |
| out->e.edx = M.x86.R_EDX; |
| out->e.esi = M.x86.R_ESI; |
| out->e.edi = M.x86.R_EDI; |
| return out->x.ax; |
| } |
| |
| /**************************************************************************** |
| PARAMETERS: |
| intno - Interrupt number to execute |
| in - Real mode registers to load |
| out - Place to store resulting real mode registers |
| sregs - Real mode segment registers to load |
| |
| REMARKS: |
| This functions calls a real mode interrupt function at the specified address, |
| and loads all the x86 registers from the passed in registers structure. |
| On exit the registers returned from the call are returned in out stucture. |
| ****************************************************************************/ |
| int X86API BE_int86x(int intno, RMREGS * in, RMREGS * out, RMSREGS * sregs) |
| { |
| M.x86.R_EAX = in->e.eax; |
| M.x86.R_EBX = in->e.ebx; |
| M.x86.R_ECX = in->e.ecx; |
| M.x86.R_EDX = in->e.edx; |
| M.x86.R_ESI = in->e.esi; |
| M.x86.R_EDI = in->e.edi; |
| M.x86.R_DS = sregs->ds; |
| M.x86.R_ES = sregs->es; |
| M.x86.R_FS = sregs->fs; |
| M.x86.R_GS = sregs->gs; |
| ((u8 *) M.mem_base)[0x4000] = 0xCD; |
| ((u8 *) M.mem_base)[0x4001] = (u8) intno; |
| ((u8 *) M.mem_base)[0x4002] = 0xF1; |
| M.x86.R_CS = SEG(0x04000); |
| M.x86.R_IP = OFF(0x04000); |
| |
| M.x86.R_SS = SEG(M.mem_size - 1); |
| M.x86.R_SP = OFF(M.mem_size - 1) - 1; |
| |
| X86EMU_exec(); |
| out->e.cflag = M.x86.R_EFLG & F_CF; |
| out->e.eax = M.x86.R_EAX; |
| out->e.ebx = M.x86.R_EBX; |
| out->e.ecx = M.x86.R_ECX; |
| out->e.edx = M.x86.R_EDX; |
| out->e.esi = M.x86.R_ESI; |
| out->e.edi = M.x86.R_EDI; |
| sregs->ds = M.x86.R_DS; |
| sregs->es = M.x86.R_ES; |
| sregs->fs = M.x86.R_FS; |
| sregs->gs = M.x86.R_GS; |
| return out->x.ax; |
| } |