| /* |
| * Atmel SPI DataFlash support |
| * |
| * Copyright (C) 2008 Atmel Corporation |
| */ |
| #define DEBUG |
| #include <common.h> |
| #include <malloc.h> |
| #include <spi_flash.h> |
| |
| #include "spi_flash_internal.h" |
| |
| /* AT45-specific commands */ |
| #define CMD_AT45_READ_STATUS 0xd7 |
| #define CMD_AT45_ERASE_PAGE 0x81 |
| #define CMD_AT45_LOAD_PROG_BUF1 0x82 |
| #define CMD_AT45_LOAD_BUF1 0x84 |
| #define CMD_AT45_LOAD_PROG_BUF2 0x85 |
| #define CMD_AT45_LOAD_BUF2 0x87 |
| #define CMD_AT45_PROG_BUF1 0x88 |
| #define CMD_AT45_PROG_BUF2 0x89 |
| |
| /* AT45 status register bits */ |
| #define AT45_STATUS_P2_PAGE_SIZE (1 << 0) |
| #define AT45_STATUS_READY (1 << 7) |
| |
| /* DataFlash family IDs, as obtained from the second idcode byte */ |
| #define DF_FAMILY_AT26F 0 |
| #define DF_FAMILY_AT45 1 |
| #define DF_FAMILY_AT26DF 2 /* AT25DF and AT26DF */ |
| |
| struct atmel_spi_flash_params { |
| u8 idcode1; |
| /* Log2 of page size in power-of-two mode */ |
| u8 l2_page_size; |
| u8 pages_per_block; |
| u8 blocks_per_sector; |
| u8 nr_sectors; |
| const char *name; |
| }; |
| |
| /* spi_flash needs to be first so upper layers can free() it */ |
| struct atmel_spi_flash { |
| struct spi_flash flash; |
| const struct atmel_spi_flash_params *params; |
| }; |
| |
| static inline struct atmel_spi_flash * |
| to_atmel_spi_flash(struct spi_flash *flash) |
| { |
| return container_of(flash, struct atmel_spi_flash, flash); |
| } |
| |
| static const struct atmel_spi_flash_params atmel_spi_flash_table[] = { |
| { |
| .idcode1 = 0x28, |
| .l2_page_size = 10, |
| .pages_per_block = 8, |
| .blocks_per_sector = 32, |
| .nr_sectors = 32, |
| .name = "AT45DB642D", |
| }, |
| }; |
| |
| static int at45_wait_ready(struct spi_flash *flash, unsigned long timeout) |
| { |
| struct spi_slave *spi = flash->spi; |
| unsigned long timebase; |
| int ret; |
| u8 cmd = CMD_AT45_READ_STATUS; |
| u8 status; |
| |
| timebase = get_timer(0); |
| |
| ret = spi_xfer(spi, 8, &cmd, NULL, SPI_XFER_BEGIN); |
| if (ret) |
| return -1; |
| |
| do { |
| ret = spi_xfer(spi, 8, NULL, &status, 0); |
| if (ret) |
| return -1; |
| |
| if (status & AT45_STATUS_READY) |
| break; |
| } while (get_timer(timebase) < timeout); |
| |
| /* Deactivate CS */ |
| spi_xfer(spi, 0, NULL, NULL, SPI_XFER_END); |
| |
| if (status & AT45_STATUS_READY) |
| return 0; |
| |
| /* Timed out */ |
| return -1; |
| } |
| |
| /* |
| * Assemble the address part of a command for AT45 devices in |
| * non-power-of-two page size mode. |
| */ |
| static void at45_build_address(struct atmel_spi_flash *asf, u8 *cmd, u32 offset) |
| { |
| unsigned long page_addr; |
| unsigned long byte_addr; |
| unsigned long page_size; |
| unsigned int page_shift; |
| |
| /* |
| * The "extra" space per page is the power-of-two page size |
| * divided by 32. |
| */ |
| page_shift = asf->params->l2_page_size; |
| page_size = (1 << page_shift) + (1 << (page_shift - 5)); |
| page_shift++; |
| page_addr = offset / page_size; |
| byte_addr = offset % page_size; |
| |
| cmd[0] = page_addr >> (16 - page_shift); |
| cmd[1] = page_addr << (page_shift - 8) | (byte_addr >> 8); |
| cmd[2] = byte_addr; |
| } |
| |
| static int dataflash_read_fast_p2(struct spi_flash *flash, |
| u32 offset, size_t len, void *buf) |
| { |
| u8 cmd[5]; |
| |
| cmd[0] = CMD_READ_ARRAY_FAST; |
| cmd[1] = offset >> 16; |
| cmd[2] = offset >> 8; |
| cmd[3] = offset; |
| cmd[4] = 0x00; |
| |
| return spi_flash_read_common(flash, cmd, sizeof(cmd), buf, len); |
| } |
| |
| static int dataflash_read_fast_at45(struct spi_flash *flash, |
| u32 offset, size_t len, void *buf) |
| { |
| struct atmel_spi_flash *asf = to_atmel_spi_flash(flash); |
| u8 cmd[5]; |
| |
| cmd[0] = CMD_READ_ARRAY_FAST; |
| at45_build_address(asf, cmd + 1, offset); |
| cmd[4] = 0x00; |
| |
| return spi_flash_read_common(flash, cmd, sizeof(cmd), buf, len); |
| } |
| |
| static int dataflash_write_at45(struct spi_flash *flash, |
| u32 offset, size_t len, const void *buf) |
| { |
| struct atmel_spi_flash *asf = to_atmel_spi_flash(flash); |
| unsigned long page_addr; |
| unsigned long byte_addr; |
| unsigned long page_size; |
| unsigned int page_shift; |
| size_t chunk_len; |
| size_t actual; |
| int ret; |
| u8 cmd[4]; |
| |
| page_shift = asf->params->l2_page_size; |
| page_size = (1 << page_shift) + (1 << (page_shift - 5)); |
| page_shift++; |
| page_addr = offset / page_size; |
| byte_addr = offset % page_size; |
| |
| ret = spi_claim_bus(flash->spi); |
| if (ret) { |
| debug("SF: Unable to claim SPI bus\n"); |
| return ret; |
| } |
| |
| for (actual = 0; actual < len; actual += chunk_len) { |
| chunk_len = min(len - actual, page_size - byte_addr); |
| |
| /* Use the same address bits for both commands */ |
| cmd[0] = CMD_AT45_LOAD_BUF1; |
| cmd[1] = page_addr >> (16 - page_shift); |
| cmd[2] = page_addr << (page_shift - 8) | (byte_addr >> 8); |
| cmd[3] = byte_addr; |
| |
| ret = spi_flash_cmd_write(flash->spi, cmd, 4, |
| buf + actual, chunk_len); |
| if (ret < 0) { |
| debug("SF: Loading AT45 buffer failed\n"); |
| goto out; |
| } |
| |
| cmd[0] = CMD_AT45_PROG_BUF1; |
| ret = spi_flash_cmd_write(flash->spi, cmd, 4, NULL, 0); |
| if (ret < 0) { |
| debug("SF: AT45 page programming failed\n"); |
| goto out; |
| } |
| |
| ret = at45_wait_ready(flash, SPI_FLASH_PROG_TIMEOUT); |
| if (ret < 0) { |
| debug("SF: AT45 page programming timed out\n"); |
| goto out; |
| } |
| |
| page_addr++; |
| byte_addr = 0; |
| } |
| |
| debug("SF: AT45: Successfully programmed %zu bytes @ 0x%x\n", |
| len, offset); |
| ret = 0; |
| |
| out: |
| spi_release_bus(flash->spi); |
| return ret; |
| } |
| |
| int dataflash_erase_at45(struct spi_flash *flash, u32 offset, size_t len) |
| { |
| struct atmel_spi_flash *asf = to_atmel_spi_flash(flash); |
| unsigned long page_addr; |
| unsigned long page_size; |
| unsigned int page_shift; |
| size_t actual; |
| int ret; |
| u8 cmd[4]; |
| |
| /* |
| * TODO: This function currently uses page erase only. We can |
| * probably speed things up by using block and/or sector erase |
| * when possible. |
| */ |
| |
| page_shift = asf->params->l2_page_size; |
| page_size = (1 << page_shift) + (1 << (page_shift - 5)); |
| page_shift++; |
| page_addr = offset / page_size; |
| |
| if (offset % page_size || len % page_size) { |
| debug("SF: Erase offset/length not multiple of page size\n"); |
| return -1; |
| } |
| |
| cmd[0] = CMD_AT45_ERASE_PAGE; |
| cmd[3] = 0x00; |
| |
| ret = spi_claim_bus(flash->spi); |
| if (ret) { |
| debug("SF: Unable to claim SPI bus\n"); |
| return ret; |
| } |
| |
| for (actual = 0; actual < len; actual += page_size) { |
| cmd[1] = page_addr >> (16 - page_shift); |
| cmd[2] = page_addr << (page_shift - 8); |
| |
| ret = spi_flash_cmd_write(flash->spi, cmd, 4, NULL, 0); |
| if (ret < 0) { |
| debug("SF: AT45 page erase failed\n"); |
| goto out; |
| } |
| |
| ret = at45_wait_ready(flash, SPI_FLASH_PAGE_ERASE_TIMEOUT); |
| if (ret < 0) { |
| debug("SF: AT45 page erase timed out\n"); |
| goto out; |
| } |
| |
| page_addr++; |
| } |
| |
| debug("SF: AT45: Successfully erased %zu bytes @ 0x%x\n", |
| len, offset); |
| ret = 0; |
| |
| out: |
| spi_release_bus(flash->spi); |
| return ret; |
| } |
| |
| struct spi_flash *spi_flash_probe_atmel(struct spi_slave *spi, u8 *idcode) |
| { |
| const struct atmel_spi_flash_params *params; |
| unsigned long page_size; |
| unsigned int family; |
| struct atmel_spi_flash *asf; |
| unsigned int i; |
| int ret; |
| u8 status; |
| |
| for (i = 0; i < ARRAY_SIZE(atmel_spi_flash_table); i++) { |
| params = &atmel_spi_flash_table[i]; |
| if (params->idcode1 == idcode[1]) |
| break; |
| } |
| |
| if (i == ARRAY_SIZE(atmel_spi_flash_table)) { |
| debug("SF: Unsupported DataFlash ID %02x\n", |
| idcode[1]); |
| return NULL; |
| } |
| |
| asf = malloc(sizeof(struct atmel_spi_flash)); |
| if (!asf) { |
| debug("SF: Failed to allocate memory\n"); |
| return NULL; |
| } |
| |
| asf->params = params; |
| asf->flash.spi = spi; |
| asf->flash.name = params->name; |
| |
| /* Assuming power-of-two page size initially. */ |
| page_size = 1 << params->l2_page_size; |
| |
| family = idcode[1] >> 5; |
| |
| switch (family) { |
| case DF_FAMILY_AT45: |
| /* |
| * AT45 chips have configurable page size. The status |
| * register indicates which configuration is active. |
| */ |
| ret = spi_flash_cmd(spi, CMD_AT45_READ_STATUS, &status, 1); |
| if (ret) |
| goto err; |
| |
| debug("SF: AT45 status register: %02x\n", status); |
| |
| if (!(status & AT45_STATUS_P2_PAGE_SIZE)) { |
| asf->flash.read = dataflash_read_fast_at45; |
| asf->flash.write = dataflash_write_at45; |
| asf->flash.erase = dataflash_erase_at45; |
| page_size += 1 << (params->l2_page_size - 5); |
| } else { |
| asf->flash.read = dataflash_read_fast_p2; |
| } |
| |
| break; |
| |
| case DF_FAMILY_AT26F: |
| case DF_FAMILY_AT26DF: |
| asf->flash.read = dataflash_read_fast_p2; |
| break; |
| |
| default: |
| debug("SF: Unsupported DataFlash family %u\n", family); |
| goto err; |
| } |
| |
| asf->flash.size = page_size * params->pages_per_block |
| * params->blocks_per_sector |
| * params->nr_sectors; |
| |
| debug("SF: Detected %s with page size %lu, total %u bytes\n", |
| params->name, page_size, asf->flash.size); |
| |
| return &asf->flash; |
| |
| err: |
| free(asf); |
| return NULL; |
| } |