arch/powerpc/cpu/mpc5xxx/start.S - github/trini/u-boot - Gitiles

 /*
  *  Copyright (C) 1998	Dan Malek <dmalek@jlc.net>
  *  Copyright (C) 1999	Magnus Damm <kieraypc01.p.y.kie.era.ericsson.se>
  *  Copyright (C) 2000 - 2003 Wolfgang Denk <wd@denx.de>
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */

 /*
  *  U-Boot - Startup Code for MPC5xxx CPUs
  */
 #include <asm-offsets.h>
 #include <config.h>
 #include <mpc5xxx.h>
 #include <version.h>

 #define CONFIG_MPC5xxx 1	/* needed for Linux kernel header files */
 #define _LINUX_CONFIG_H 1	/* avoid reading Linux autoconf.h file	*/

 #include <ppc_asm.tmpl>
 #include <ppc_defs.h>

 #include <asm/cache.h>
 #include <asm/mmu.h>
 #include <asm/u-boot.h>

 /* We don't want the  MMU yet.
 */
 #undef	MSR_KERNEL
 /* Floating Point enable, Machine Check and Recoverable Interr. */
 #ifdef DEBUG
 #define MSR_KERNEL (MSR_FP|MSR_RI)
 #else
 #define MSR_KERNEL (MSR_FP|MSR_ME|MSR_RI)
 #endif

 #ifndef CONFIG_SPL_BUILD
 /*
  * Set up GOT: Global Offset Table
  *
  * Use r12 to access the GOT
  */
 	START_GOT
 	GOT_ENTRY(_GOT2_TABLE_)
 	GOT_ENTRY(_FIXUP_TABLE_)

 	GOT_ENTRY(_start)
 	GOT_ENTRY(_start_of_vectors)
 	GOT_ENTRY(_end_of_vectors)
 	GOT_ENTRY(transfer_to_handler)

 	GOT_ENTRY(__init_end)
 	GOT_ENTRY(__bss_end)
 	GOT_ENTRY(__bss_start)
 	END_GOT
 #endif

 /*
  * Version string
  */
 	.data
 	.globl	version_string
 version_string:
 	.ascii U_BOOT_VERSION_STRING, "\0"

 /*
  * Exception vectors
  */
 	.text
 	. = EXC_OFF_SYS_RESET
 	.globl	_start
 _start:

 #if defined(CONFIG_SPL) && !defined(CONFIG_SPL_BUILD)
 	/*
 	 * This is the entry of the real U-Boot from a board port
 	 * that supports SPL booting on the MPC5200. We only need
 	 * to call board_init_f() here. Everything else has already
 	 * been done in the SPL u-boot version.
 	 */
 	GET_GOT			/* initialize GOT access		*/
 	bl	board_init_f	/* run 1st part of board init code (in Flash)*/
 	/* NOTREACHED - board_init_f() does not return */
 #else
 	mfmsr	r5			/* save msr contents		*/

 	/* Move CSBoot and adjust instruction pointer                   */
 	/*--------------------------------------------------------------*/

 #if defined(CONFIG_SYS_LOWBOOT)
 # if defined(CONFIG_SYS_RAMBOOT)
 #  error CONFIG_SYS_LOWBOOT is incompatible with CONFIG_SYS_RAMBOOT
 # endif /* CONFIG_SYS_RAMBOOT */
 	lis	r4, CONFIG_SYS_DEFAULT_MBAR@h
 	lis	r3,	START_REG(CONFIG_SYS_BOOTCS_START)@h
 	ori	r3, r3, START_REG(CONFIG_SYS_BOOTCS_START)@l
 	stw	r3, 0x4(r4)		/* CS0 start */
 	lis	r3,	STOP_REG(CONFIG_SYS_BOOTCS_START, CONFIG_SYS_BOOTCS_SIZE)@h
 	ori	r3, r3, STOP_REG(CONFIG_SYS_BOOTCS_START, CONFIG_SYS_BOOTCS_SIZE)@l
 	stw	r3, 0x8(r4)		/* CS0 stop */
 	lis	r3,     0x02010000@h
 	ori	r3, r3, 0x02010000@l
 	stw	r3, 0x54(r4)		/* CS0 and Boot enable */

 	lis     r3,	lowboot_reentry@h	/* jump from bootlow address space (0x0000xxxx) */
 	ori     r3, r3, lowboot_reentry@l	/* to the address space the linker used */
 	mtlr	r3
 	blr

 lowboot_reentry:
 	lis	r3,	START_REG(CONFIG_SYS_BOOTCS_START)@h
 	ori	r3, r3, START_REG(CONFIG_SYS_BOOTCS_START)@l
 	stw	r3, 0x4c(r4)		/* Boot start */
 	lis	r3,	STOP_REG(CONFIG_SYS_BOOTCS_START, CONFIG_SYS_BOOTCS_SIZE)@h
 	ori	r3, r3, STOP_REG(CONFIG_SYS_BOOTCS_START, CONFIG_SYS_BOOTCS_SIZE)@l
 	stw	r3, 0x50(r4)		/* Boot stop */
 	lis	r3,     0x02000001@h
 	ori	r3, r3, 0x02000001@l
 	stw	r3, 0x54(r4)		/* Boot enable, CS0 disable */
 #endif	/* CONFIG_SYS_LOWBOOT */

 #if defined(CONFIG_SYS_DEFAULT_MBAR) && !defined(CONFIG_SYS_RAMBOOT)
 	lis	r3, CONFIG_SYS_MBAR@h
 	ori	r3, r3, CONFIG_SYS_MBAR@l
 	/* MBAR is mirrored into the MBAR SPR */
 	mtspr	MBAR,r3
 	rlwinm	r3, r3, 16, 16, 31
 	lis	r4, CONFIG_SYS_DEFAULT_MBAR@h
 	stw	r3, 0(r4)
 #endif /* CONFIG_SYS_DEFAULT_MBAR */

 	/* Initialise the MPC5xxx processor core			*/
 	/*--------------------------------------------------------------*/

 	bl	init_5xxx_core

 	/* initialize some things that are hard to access from C	*/
 	/*--------------------------------------------------------------*/

 	/* set up stack in on-chip SRAM */
 	lis	r3, CONFIG_SYS_INIT_RAM_ADDR@h
 	ori	r3, r3, CONFIG_SYS_INIT_RAM_ADDR@l
 	ori	r1, r3, CONFIG_SYS_INIT_SP_OFFSET
 	li	r0, 0			/* Make room for stack frame header and	*/
 	stwu	r0, -4(r1)		/* clear final stack frame so that	*/
 	stwu	r0, -4(r1)		/* stack backtraces terminate cleanly	*/

 	/* let the C-code set up the rest				*/
 	/*								*/
 	/* Be careful to keep code relocatable !			*/
 	/*--------------------------------------------------------------*/

 #ifndef CONFIG_SPL_BUILD
 	GET_GOT			/* initialize GOT access		*/
 #endif

 	/* r3: IMMR */
 	bl	cpu_init_f	/* run low-level CPU init code (in Flash)*/

 	bl	board_init_f	/* run 1st part of board init code (in Flash)*/

 	/* NOTREACHED - board_init_f() does not return */
 #endif

 #ifndef CONFIG_SPL_BUILD
 /*
  * Vector Table
  */

 	.globl	_start_of_vectors
 _start_of_vectors:

 /* Machine check */
 	STD_EXCEPTION(0x200, MachineCheck, MachineCheckException)

 /* Data Storage exception. */
 	STD_EXCEPTION(0x300, DataStorage, UnknownException)

 /* Instruction Storage exception. */
 	STD_EXCEPTION(0x400, InstStorage, UnknownException)

 /* External Interrupt exception. */
 	STD_EXCEPTION(0x500, ExtInterrupt, external_interrupt)

 /* Alignment exception. */
 	. = 0x600
 Alignment:
 	EXCEPTION_PROLOG(SRR0, SRR1)
 	mfspr	r4,DAR
 	stw	r4,_DAR(r21)
 	mfspr	r5,DSISR
 	stw	r5,_DSISR(r21)
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 	EXC_XFER_TEMPLATE(Alignment, AlignmentException, MSR_KERNEL, COPY_EE)

 /* Program check exception */
 	. = 0x700
 ProgramCheck:
 	EXCEPTION_PROLOG(SRR0, SRR1)
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 	EXC_XFER_TEMPLATE(ProgramCheck, ProgramCheckException,
 		MSR_KERNEL, COPY_EE)

 	STD_EXCEPTION(0x800, FPUnavailable, UnknownException)

 	/* I guess we could implement decrementer, and may have
 	 * to someday for timekeeping.
 	 */
 	STD_EXCEPTION(0x900, Decrementer, timer_interrupt)

 	STD_EXCEPTION(0xa00, Trap_0a, UnknownException)
 	STD_EXCEPTION(0xb00, Trap_0b, UnknownException)
 	STD_EXCEPTION(0xc00, SystemCall, UnknownException)
 	STD_EXCEPTION(0xd00, SingleStep, UnknownException)

 	STD_EXCEPTION(0xe00, Trap_0e, UnknownException)
 	STD_EXCEPTION(0xf00, Trap_0f, UnknownException)

 	STD_EXCEPTION(0x1000, InstructionTLBMiss, UnknownException)
 	STD_EXCEPTION(0x1100, DataLoadTLBMiss, UnknownException)
 	STD_EXCEPTION(0x1200, DataStoreTLBMiss, UnknownException)
 #ifdef DEBUG
 	. = 0x1300
 	/*
 	 * This exception occurs when the program counter matches the
 	 * Instruction Address Breakpoint Register (IABR).
 	 *
 	 * I want the cpu to halt if this occurs so I can hunt around
 	 * with the debugger and look at things.
 	 *
 	 * When DEBUG is defined, both machine check enable (in the MSR)
 	 * and checkstop reset enable (in the reset mode register) are
 	 * turned off and so a checkstop condition will result in the cpu
 	 * halting.
 	 *
 	 * I force the cpu into a checkstop condition by putting an illegal
 	 * instruction here (at least this is the theory).
 	 *
 	 * well - that didnt work, so just do an infinite loop!
 	 */
 1:	b	1b
 #else
 	STD_EXCEPTION(0x1300, InstructionBreakpoint, DebugException)
 #endif
 	STD_EXCEPTION(0x1400, SMI, UnknownException)

 	STD_EXCEPTION(0x1500, Trap_15, UnknownException)
 	STD_EXCEPTION(0x1600, Trap_16, UnknownException)
 	STD_EXCEPTION(0x1700, Trap_17, UnknownException)
 	STD_EXCEPTION(0x1800, Trap_18, UnknownException)
 	STD_EXCEPTION(0x1900, Trap_19, UnknownException)
 	STD_EXCEPTION(0x1a00, Trap_1a, UnknownException)
 	STD_EXCEPTION(0x1b00, Trap_1b, UnknownException)
 	STD_EXCEPTION(0x1c00, Trap_1c, UnknownException)
 	STD_EXCEPTION(0x1d00, Trap_1d, UnknownException)
 	STD_EXCEPTION(0x1e00, Trap_1e, UnknownException)
 	STD_EXCEPTION(0x1f00, Trap_1f, UnknownException)
 	STD_EXCEPTION(0x2000, Trap_20, UnknownException)
 	STD_EXCEPTION(0x2100, Trap_21, UnknownException)
 	STD_EXCEPTION(0x2200, Trap_22, UnknownException)
 	STD_EXCEPTION(0x2300, Trap_23, UnknownException)
 	STD_EXCEPTION(0x2400, Trap_24, UnknownException)
 	STD_EXCEPTION(0x2500, Trap_25, UnknownException)
 	STD_EXCEPTION(0x2600, Trap_26, UnknownException)
 	STD_EXCEPTION(0x2700, Trap_27, UnknownException)
 	STD_EXCEPTION(0x2800, Trap_28, UnknownException)
 	STD_EXCEPTION(0x2900, Trap_29, UnknownException)
 	STD_EXCEPTION(0x2a00, Trap_2a, UnknownException)
 	STD_EXCEPTION(0x2b00, Trap_2b, UnknownException)
 	STD_EXCEPTION(0x2c00, Trap_2c, UnknownException)
 	STD_EXCEPTION(0x2d00, Trap_2d, UnknownException)
 	STD_EXCEPTION(0x2e00, Trap_2e, UnknownException)
 	STD_EXCEPTION(0x2f00, Trap_2f, UnknownException)


 	.globl	_end_of_vectors
 _end_of_vectors:

 	. = 0x3000

 /*
  * This code finishes saving the registers to the exception frame
  * and jumps to the appropriate handler for the exception.
  * Register r21 is pointer into trap frame, r1 has new stack pointer.
  */
 	.globl	transfer_to_handler
 transfer_to_handler:
 	stw	r22,_NIP(r21)
 	lis	r22,MSR_POW@h
 	andc	r23,r23,r22
 	stw	r23,_MSR(r21)
 	SAVE_GPR(7, r21)
 	SAVE_4GPRS(8, r21)
 	SAVE_8GPRS(12, r21)
 	SAVE_8GPRS(24, r21)
 	mflr	r23
 	andi.	r24,r23,0x3f00		/* get vector offset */
 	stw	r24,TRAP(r21)
 	li	r22,0
 	stw	r22,RESULT(r21)
 	lwz	r24,0(r23)		/* virtual address of handler */
 	lwz	r23,4(r23)		/* where to go when done */
 	mtspr	SRR0,r24
 	mtspr	SRR1,r20
 	mtlr	r23
 	SYNC
 	rfi				/* jump to handler, enable MMU */

 int_return:
 	mfmsr	r28		/* Disable interrupts */
 	li	r4,0
 	ori	r4,r4,MSR_EE
 	andc	r28,r28,r4
 	SYNC			/* Some chip revs need this... */
 	mtmsr	r28
 	SYNC
 	lwz	r2,_CTR(r1)
 	lwz	r0,_LINK(r1)
 	mtctr	r2
 	mtlr	r0
 	lwz	r2,_XER(r1)
 	lwz	r0,_CCR(r1)
 	mtspr	XER,r2
 	mtcrf	0xFF,r0
 	REST_10GPRS(3, r1)
 	REST_10GPRS(13, r1)
 	REST_8GPRS(23, r1)
 	REST_GPR(31, r1)
 	lwz	r2,_NIP(r1)	/* Restore environment */
 	lwz	r0,_MSR(r1)
 	mtspr	SRR0,r2
 	mtspr	SRR1,r0
 	lwz	r0,GPR0(r1)
 	lwz	r2,GPR2(r1)
 	lwz	r1,GPR1(r1)
 	SYNC
 	rfi
 #endif /* CONFIG_SPL_BUILD */

 /*
  * This code initialises the MPC5xxx processor core
  * (conforms to PowerPC 603e spec)
  * Note: expects original MSR contents to be in r5.
  */

 	.globl	init_5xx_core
 init_5xxx_core:

 	/* Initialize machine status; enable machine check interrupt	*/
 	/*--------------------------------------------------------------*/

 	li	r3, MSR_KERNEL		/* Set ME and RI flags */
 	rlwimi	r3, r5, 0, 25, 25	/* preserve IP bit set by HRCW */
 #ifdef DEBUG
 	rlwimi	r3, r5, 0, 21, 22	/* debugger might set SE & BE bits */
 #endif
 	SYNC				/* Some chip revs need this... */
 	mtmsr	r3
 	SYNC
 	mtspr	SRR1, r3		/* Make SRR1 match MSR */

 	/* Initialize the Hardware Implementation-dependent Registers	*/
 	/* HID0 also contains cache control				*/
 	/*--------------------------------------------------------------*/

 	lis	r3, CONFIG_SYS_HID0_INIT@h
 	ori	r3, r3, CONFIG_SYS_HID0_INIT@l
 	SYNC
 	mtspr	HID0, r3

 	lis	r3, CONFIG_SYS_HID0_FINAL@h
 	ori	r3, r3, CONFIG_SYS_HID0_FINAL@l
 	SYNC
 	mtspr	HID0, r3

 	/* clear all BAT's						*/
 	/*--------------------------------------------------------------*/

 	li	r0, 0
 	mtspr	DBAT0U, r0
 	mtspr	DBAT0L, r0
 	mtspr	DBAT1U, r0
 	mtspr	DBAT1L, r0
 	mtspr	DBAT2U, r0
 	mtspr	DBAT2L, r0
 	mtspr	DBAT3U, r0
 	mtspr	DBAT3L, r0
 	mtspr	DBAT4U, r0
 	mtspr	DBAT4L, r0
 	mtspr	DBAT5U, r0
 	mtspr	DBAT5L, r0
 	mtspr	DBAT6U, r0
 	mtspr	DBAT6L, r0
 	mtspr	DBAT7U, r0
 	mtspr	DBAT7L, r0
 	mtspr	IBAT0U, r0
 	mtspr	IBAT0L, r0
 	mtspr	IBAT1U, r0
 	mtspr	IBAT1L, r0
 	mtspr	IBAT2U, r0
 	mtspr	IBAT2L, r0
 	mtspr	IBAT3U, r0
 	mtspr	IBAT3L, r0
 	mtspr	IBAT4U, r0
 	mtspr	IBAT4L, r0
 	mtspr	IBAT5U, r0
 	mtspr	IBAT5L, r0
 	mtspr	IBAT6U, r0
 	mtspr	IBAT6L, r0
 	mtspr	IBAT7U, r0
 	mtspr	IBAT7L, r0
 	SYNC

 	/* invalidate all tlb's						*/
 	/*								*/
 	/* From the 603e User Manual: "The 603e provides the ability to	*/
 	/* invalidate a TLB entry. The TLB Invalidate Entry (tlbie)	*/
 	/* instruction invalidates the TLB entry indexed by the EA, and	*/
 	/* operates on both the instruction and data TLBs simultaneously*/
 	/* invalidating four TLB entries (both sets in each TLB). The	*/
 	/* index corresponds to bits 15-19 of the EA. To invalidate all	*/
 	/* entries within both TLBs, 32 tlbie instructions should be	*/
 	/* issued, incrementing this field by one each time."		*/
 	/*								*/
 	/* "Note that the tlbia instruction is not implemented on the	*/
 	/* 603e."							*/
 	/*								*/
 	/* bits 15-19 correspond to addresses 0x00000000 to 0x0001F000	*/
 	/* incrementing by 0x1000 each time. The code below is sort of	*/
 	/* based on code in "flush_tlbs" from arch/powerpc/kernel/head.S	*/
 	/*								*/
 	/*--------------------------------------------------------------*/

 	li	r3, 32
 	mtctr	r3
 	li	r3, 0
 1:	tlbie	r3
 	addi	r3, r3, 0x1000
 	bdnz	1b
 	SYNC

 	/* Done!							*/
 	/*--------------------------------------------------------------*/

 	blr

 /* Cache functions.
  *
  * Note: requires that all cache bits in
  * HID0 are in the low half word.
  */
 	.globl	icache_enable
 icache_enable:
 	mfspr	r3, HID0
 	ori	r3, r3, HID0_ICE
 	lis	r4, 0
 	ori	r4, r4, HID0_ILOCK
 	andc	r3, r3, r4
 	ori	r4, r3, HID0_ICFI
 	isync
 	mtspr	HID0, r4	/* sets enable and invalidate, clears lock */
 	isync
 	mtspr	HID0, r3	/* clears invalidate */
 	blr

 	.globl	icache_disable
 icache_disable:
 	mfspr	r3, HID0
 	lis	r4, 0
 	ori	r4, r4, HID0_ICE|HID0_ILOCK
 	andc	r3, r3, r4
 	ori	r4, r3, HID0_ICFI
 	isync
 	mtspr	HID0, r4	/* sets invalidate, clears enable and lock */
 	isync
 	mtspr	HID0, r3	/* clears invalidate */
 	blr

 	.globl	icache_status
 icache_status:
 	mfspr	r3, HID0
 	rlwinm	r3, r3, HID0_ICE_BITPOS + 1, 31, 31
 	blr

 	.globl	dcache_enable
 dcache_enable:
 	mfspr	r3, HID0
 	ori	r3, r3, HID0_DCE
 	lis	r4, 0
 	ori	r4, r4, HID0_DLOCK
 	andc	r3, r3, r4
 	ori	r4, r3, HID0_DCI
 	sync
 	mtspr	HID0, r4	/* sets enable and invalidate, clears lock */
 	sync
 	mtspr	HID0, r3	/* clears invalidate */
 	blr

 	.globl	dcache_disable
 dcache_disable:
 	mfspr	r3, HID0
 	lis	r4, 0
 	ori	r4, r4, HID0_DCE|HID0_DLOCK
 	andc	r3, r3, r4
 	ori	r4, r3, HID0_DCI
 	sync
 	mtspr	HID0, r4	/* sets invalidate, clears enable and lock */
 	sync
 	mtspr	HID0, r3	/* clears invalidate */
 	blr

 	.globl	dcache_status
 dcache_status:
 	mfspr	r3, HID0
 	rlwinm	r3, r3, HID0_DCE_BITPOS + 1, 31, 31
 	blr

 	.globl get_svr
 get_svr:
 	mfspr	r3, SVR
 	blr

 	.globl get_pvr
 get_pvr:
 	mfspr	r3, PVR
 	blr

 #ifndef CONFIG_SPL_BUILD
 /*------------------------------------------------------------------------------*/

 /*
  * void relocate_code (addr_sp, gd, addr_moni)
  *
  * This "function" does not return, instead it continues in RAM
  * after relocating the monitor code.
  *
  * r3 = dest
  * r4 = src
  * r5 = length in bytes
  * r6 = cachelinesize
  */
 	.globl	relocate_code
 relocate_code:
 	mr	r1,  r3		/* Set new stack pointer		*/
 	mr	r9,  r4		/* Save copy of Global Data pointer	*/
 	mr	r10, r5		/* Save copy of Destination Address	*/

 	GET_GOT
 	mr	r3,  r5				/* Destination Address	*/
 	lis	r4, CONFIG_SYS_MONITOR_BASE@h		/* Source      Address	*/
 	ori	r4, r4, CONFIG_SYS_MONITOR_BASE@l
 	lwz	r5, GOT(__init_end)
 	sub	r5, r5, r4
 	li	r6, CONFIG_SYS_CACHELINE_SIZE		/* Cache Line Size	*/

 	/*
 	 * Fix GOT pointer:
 	 *
 	 * New GOT-PTR = (old GOT-PTR - CONFIG_SYS_MONITOR_BASE) + Destination Address
 	 *
 	 * Offset:
 	 */
 	sub	r15, r10, r4

 	/* First our own GOT */
 	add	r12, r12, r15
 	/* then the one used by the C code */
 	add	r30, r30, r15

 	/*
 	 * Now relocate code
 	 */

 	cmplw	cr1,r3,r4
 	addi	r0,r5,3
 	srwi.	r0,r0,2
 	beq	cr1,4f		/* In place copy is not necessary	*/
 	beq	7f		/* Protect against 0 count		*/
 	mtctr	r0
 	bge	cr1,2f

 	la	r8,-4(r4)
 	la	r7,-4(r3)
 1:	lwzu	r0,4(r8)
 	stwu	r0,4(r7)
 	bdnz	1b
 	b	4f

 2:	slwi	r0,r0,2
 	add	r8,r4,r0
 	add	r7,r3,r0
 3:	lwzu	r0,-4(r8)
 	stwu	r0,-4(r7)
 	bdnz	3b

 /*
  * Now flush the cache: note that we must start from a cache aligned
  * address. Otherwise we might miss one cache line.
  */
 4:	cmpwi	r6,0
 	add	r5,r3,r5
 	beq	7f		/* Always flush prefetch queue in any case */
 	subi	r0,r6,1
 	andc	r3,r3,r0
 	mfspr	r7,HID0		/* don't do dcbst if dcache is disabled */
 	rlwinm	r7,r7,HID0_DCE_BITPOS+1,31,31
 	cmpwi	r7,0
 	beq	9f
 	mr	r4,r3
 5:	dcbst	0,r4
 	add	r4,r4,r6
 	cmplw	r4,r5
 	blt	5b
 	sync			/* Wait for all dcbst to complete on bus */
 9:	mfspr	r7,HID0		/* don't do icbi if icache is disabled */
 	rlwinm	r7,r7,HID0_ICE_BITPOS+1,31,31
 	cmpwi	r7,0
 	beq	7f
 	mr	r4,r3
 6:	icbi	0,r4
 	add	r4,r4,r6
 	cmplw	r4,r5
 	blt	6b
 7:	sync			/* Wait for all icbi to complete on bus	*/
 	isync

 /*
  * We are done. Do not return, instead branch to second part of board
  * initialization, now running from RAM.
  */

 	addi	r0, r10, in_ram - _start + EXC_OFF_SYS_RESET
 	mtlr	r0
 	blr

 in_ram:

 	/*
 	 * Relocation Function, r12 point to got2+0x8000
 	 *
 	 * Adjust got2 pointers, no need to check for 0, this code
 	 * already puts a few entries in the table.
 	 */
 	li	r0,__got2_entries@sectoff@l
 	la	r3,GOT(_GOT2_TABLE_)
 	lwz	r11,GOT(_GOT2_TABLE_)
 	mtctr	r0
 	sub	r11,r3,r11
 	addi	r3,r3,-4
 1:	lwzu	r0,4(r3)
 	cmpwi	r0,0
 	beq-	2f
 	add	r0,r0,r11
 	stw	r0,0(r3)
 2:	bdnz	1b

 	/*
 	 * Now adjust the fixups and the pointers to the fixups
 	 * in case we need to move ourselves again.
 	 */
 	li	r0,__fixup_entries@sectoff@l
 	lwz	r3,GOT(_FIXUP_TABLE_)
 	cmpwi	r0,0
 	mtctr	r0
 	addi	r3,r3,-4
 	beq	4f
 3:	lwzu	r4,4(r3)
 	lwzux	r0,r4,r11
 	cmpwi	r0,0
 	add	r0,r0,r11
 	stw	r4,0(r3)
 	beq-	5f
 	stw	r0,0(r4)
 5:	bdnz	3b
 4:
 clear_bss:
 	/*
 	 * Now clear BSS segment
 	 */
 	lwz	r3,GOT(__bss_start)
 	lwz	r4,GOT(__bss_end)

 	cmplw	0, r3, r4
 	beq	6f

 	li	r0, 0
 5:
 	stw	r0, 0(r3)
 	addi	r3, r3, 4
 	cmplw	0, r3, r4
 	bne	5b
 6:

 	mr	r3, r9		/* Global Data pointer		*/
 	mr	r4, r10		/* Destination Address		*/
 	bl	board_init_r

 	/*
 	 * Copy exception vector code to low memory
 	 *
 	 * r3: dest_addr
 	 * r7: source address, r8: end address, r9: target address
 	 */
 	.globl	trap_init
 trap_init:
 	mflr	r4			/* save link register		*/
 	GET_GOT
 	lwz	r7, GOT(_start)
 	lwz	r8, GOT(_end_of_vectors)

 	li	r9, 0x100		/* reset vector always at 0x100 */

 	cmplw	0, r7, r8
 	bgelr				/* return if r7>=r8 - just in case */
 1:
 	lwz	r0, 0(r7)
 	stw	r0, 0(r9)
 	addi	r7, r7, 4
 	addi	r9, r9, 4
 	cmplw	0, r7, r8
 	bne	1b

 	/*
 	 * relocate `hdlr' and `int_return' entries
 	 */
 	li	r7, .L_MachineCheck - _start + EXC_OFF_SYS_RESET
 	li	r8, Alignment - _start + EXC_OFF_SYS_RESET
 2:
 	bl	trap_reloc
 	addi	r7, r7, 0x100		/* next exception vector	*/
 	cmplw	0, r7, r8
 	blt	2b

 	li	r7, .L_Alignment - _start + EXC_OFF_SYS_RESET
 	bl	trap_reloc

 	li	r7, .L_ProgramCheck - _start + EXC_OFF_SYS_RESET
 	bl	trap_reloc

 	li	r7, .L_FPUnavailable - _start + EXC_OFF_SYS_RESET
 	li	r8, SystemCall - _start + EXC_OFF_SYS_RESET
 3:
 	bl	trap_reloc
 	addi	r7, r7, 0x100		/* next exception vector	*/
 	cmplw	0, r7, r8
 	blt	3b

 	li	r7, .L_SingleStep - _start + EXC_OFF_SYS_RESET
 	li	r8, _end_of_vectors - _start + EXC_OFF_SYS_RESET
 4:
 	bl	trap_reloc
 	addi	r7, r7, 0x100		/* next exception vector	*/
 	cmplw	0, r7, r8
 	blt	4b

 	mfmsr	r3			/* now that the vectors have	*/
 	lis	r7, MSR_IP@h		/* relocated into low memory	*/
 	ori	r7, r7, MSR_IP@l	/* MSR[IP] can be turned off	*/
 	andc	r3, r3, r7		/* (if it was on)		*/
 	SYNC				/* Some chip revs need this... */
 	mtmsr	r3
 	SYNC

 	mtlr	r4			/* restore link register    */
 	blr

 #endif /* CONFIG_SPL_BUILD */
	/*
	* Copyright (C) 1998 Dan Malek <dmalek@jlc.net>
	* Copyright (C) 1999 Magnus Damm <kieraypc01.p.y.kie.era.ericsson.se>
	* Copyright (C) 2000 - 2003 Wolfgang Denk <wd@denx.de>
	*
	* SPDX-License-Identifier: GPL-2.0+
	*/

	/*
	* U-Boot - Startup Code for MPC5xxx CPUs
	*/
	#include <asm-offsets.h>
	#include <config.h>
	#include <mpc5xxx.h>
	#include <version.h>

	#define CONFIG_MPC5xxx 1 /* needed for Linux kernel header files */
	#define _LINUX_CONFIG_H 1 /* avoid reading Linux autoconf.h file */

	#include <ppc_asm.tmpl>
	#include <ppc_defs.h>

	#include <asm/cache.h>
	#include <asm/mmu.h>
	#include <asm/u-boot.h>

	/* We don't want the MMU yet.
	*/
	#undef MSR_KERNEL
	/* Floating Point enable, Machine Check and Recoverable Interr. */
	#ifdef DEBUG
	#define MSR_KERNEL (MSR_FP\|MSR_RI)
	#else
	#define MSR_KERNEL (MSR_FP\|MSR_ME\|MSR_RI)
	#endif

	#ifndef CONFIG_SPL_BUILD
	/*
	* Set up GOT: Global Offset Table
	*
	* Use r12 to access the GOT
	*/
	START_GOT
	GOT_ENTRY(_GOT2_TABLE_)
	GOT_ENTRY(_FIXUP_TABLE_)

	GOT_ENTRY(_start)
	GOT_ENTRY(_start_of_vectors)
	GOT_ENTRY(_end_of_vectors)
	GOT_ENTRY(transfer_to_handler)

	GOT_ENTRY(__init_end)
	GOT_ENTRY(__bss_end)
	GOT_ENTRY(__bss_start)
	END_GOT
	#endif

	/*
	* Version string
	*/
	.data
	.globl version_string
	version_string:
	.ascii U_BOOT_VERSION_STRING, "\0"

	/*
	* Exception vectors
	*/
	.text
	. = EXC_OFF_SYS_RESET
	.globl _start
	_start:

	#if defined(CONFIG_SPL) && !defined(CONFIG_SPL_BUILD)
	/*
	* This is the entry of the real U-Boot from a board port
	* that supports SPL booting on the MPC5200. We only need
	* to call board_init_f() here. Everything else has already
	* been done in the SPL u-boot version.
	*/
	GET_GOT /* initialize GOT access */
	bl board_init_f /* run 1st part of board init code (in Flash)*/
	/* NOTREACHED - board_init_f() does not return */
	#else
	mfmsr r5 /* save msr contents */

	/* Move CSBoot and adjust instruction pointer */
	/--------------------------------------------------------------/

	#if defined(CONFIG_SYS_LOWBOOT)
	# if defined(CONFIG_SYS_RAMBOOT)
	# error CONFIG_SYS_LOWBOOT is incompatible with CONFIG_SYS_RAMBOOT
	# endif /* CONFIG_SYS_RAMBOOT */
	lis r4, CONFIG_SYS_DEFAULT_MBAR@h
	lis r3, START_REG(CONFIG_SYS_BOOTCS_START)@h
	ori r3, r3, START_REG(CONFIG_SYS_BOOTCS_START)@l
	stw r3, 0x4(r4) /* CS0 start */
	lis r3, STOP_REG(CONFIG_SYS_BOOTCS_START, CONFIG_SYS_BOOTCS_SIZE)@h
	ori r3, r3, STOP_REG(CONFIG_SYS_BOOTCS_START, CONFIG_SYS_BOOTCS_SIZE)@l
	stw r3, 0x8(r4) /* CS0 stop */
	lis r3, 0x02010000@h
	ori r3, r3, 0x02010000@l
	stw r3, 0x54(r4) /* CS0 and Boot enable */

	lis r3, lowboot_reentry@h /* jump from bootlow address space (0x0000xxxx) */
	ori r3, r3, lowboot_reentry@l /* to the address space the linker used */
	mtlr r3
	blr

	lowboot_reentry:
	lis r3, START_REG(CONFIG_SYS_BOOTCS_START)@h
	ori r3, r3, START_REG(CONFIG_SYS_BOOTCS_START)@l
	stw r3, 0x4c(r4) /* Boot start */
	lis r3, STOP_REG(CONFIG_SYS_BOOTCS_START, CONFIG_SYS_BOOTCS_SIZE)@h
	ori r3, r3, STOP_REG(CONFIG_SYS_BOOTCS_START, CONFIG_SYS_BOOTCS_SIZE)@l
	stw r3, 0x50(r4) /* Boot stop */
	lis r3, 0x02000001@h
	ori r3, r3, 0x02000001@l
	stw r3, 0x54(r4) /* Boot enable, CS0 disable */
	#endif /* CONFIG_SYS_LOWBOOT */

	#if defined(CONFIG_SYS_DEFAULT_MBAR) && !defined(CONFIG_SYS_RAMBOOT)
	lis r3, CONFIG_SYS_MBAR@h
	ori r3, r3, CONFIG_SYS_MBAR@l
	/* MBAR is mirrored into the MBAR SPR */
	mtspr MBAR,r3
	rlwinm r3, r3, 16, 16, 31
	lis r4, CONFIG_SYS_DEFAULT_MBAR@h
	stw r3, 0(r4)
	#endif /* CONFIG_SYS_DEFAULT_MBAR */

	/* Initialise the MPC5xxx processor core */
	/--------------------------------------------------------------/

	bl init_5xxx_core

	/* initialize some things that are hard to access from C */
	/--------------------------------------------------------------/

	/* set up stack in on-chip SRAM */
	lis r3, CONFIG_SYS_INIT_RAM_ADDR@h
	ori r3, r3, CONFIG_SYS_INIT_RAM_ADDR@l
	ori r1, r3, CONFIG_SYS_INIT_SP_OFFSET
	li r0, 0 /* Make room for stack frame header and */
	stwu r0, -4(r1) /* clear final stack frame so that */
	stwu r0, -4(r1) /* stack backtraces terminate cleanly */

	/* let the C-code set up the rest */
	/* */
	/* Be careful to keep code relocatable ! */
	/--------------------------------------------------------------/

	#ifndef CONFIG_SPL_BUILD
	GET_GOT /* initialize GOT access */
	#endif

	/* r3: IMMR */
	bl cpu_init_f /* run low-level CPU init code (in Flash)*/

	bl board_init_f /* run 1st part of board init code (in Flash)*/

	/* NOTREACHED - board_init_f() does not return */
	#endif

	#ifndef CONFIG_SPL_BUILD
	/*
	* Vector Table
	*/

	.globl _start_of_vectors
	_start_of_vectors:

	/* Machine check */
	STD_EXCEPTION(0x200, MachineCheck, MachineCheckException)

	/* Data Storage exception. */
	STD_EXCEPTION(0x300, DataStorage, UnknownException)

	/* Instruction Storage exception. */
	STD_EXCEPTION(0x400, InstStorage, UnknownException)

	/* External Interrupt exception. */
	STD_EXCEPTION(0x500, ExtInterrupt, external_interrupt)

	/* Alignment exception. */
	. = 0x600
	Alignment:
	EXCEPTION_PROLOG(SRR0, SRR1)
	mfspr r4,DAR
	stw r4,_DAR(r21)
	mfspr r5,DSISR
	stw r5,_DSISR(r21)
	addi r3,r1,STACK_FRAME_OVERHEAD
	EXC_XFER_TEMPLATE(Alignment, AlignmentException, MSR_KERNEL, COPY_EE)

	/* Program check exception */
	. = 0x700
	ProgramCheck:
	EXCEPTION_PROLOG(SRR0, SRR1)
	addi r3,r1,STACK_FRAME_OVERHEAD
	EXC_XFER_TEMPLATE(ProgramCheck, ProgramCheckException,
	MSR_KERNEL, COPY_EE)

	STD_EXCEPTION(0x800, FPUnavailable, UnknownException)

	/* I guess we could implement decrementer, and may have
	* to someday for timekeeping.
	*/
	STD_EXCEPTION(0x900, Decrementer, timer_interrupt)

	STD_EXCEPTION(0xa00, Trap_0a, UnknownException)
	STD_EXCEPTION(0xb00, Trap_0b, UnknownException)
	STD_EXCEPTION(0xc00, SystemCall, UnknownException)
	STD_EXCEPTION(0xd00, SingleStep, UnknownException)

	STD_EXCEPTION(0xe00, Trap_0e, UnknownException)
	STD_EXCEPTION(0xf00, Trap_0f, UnknownException)

	STD_EXCEPTION(0x1000, InstructionTLBMiss, UnknownException)
	STD_EXCEPTION(0x1100, DataLoadTLBMiss, UnknownException)
	STD_EXCEPTION(0x1200, DataStoreTLBMiss, UnknownException)
	#ifdef DEBUG
	. = 0x1300
	/*
	* This exception occurs when the program counter matches the
	* Instruction Address Breakpoint Register (IABR).
	*
	* I want the cpu to halt if this occurs so I can hunt around
	* with the debugger and look at things.
	*
	* When DEBUG is defined, both machine check enable (in the MSR)
	* and checkstop reset enable (in the reset mode register) are
	* turned off and so a checkstop condition will result in the cpu
	* halting.
	*
	* I force the cpu into a checkstop condition by putting an illegal
	* instruction here (at least this is the theory).
	*
	* well - that didnt work, so just do an infinite loop!
	*/
	1: b 1b
	#else
	STD_EXCEPTION(0x1300, InstructionBreakpoint, DebugException)
	#endif
	STD_EXCEPTION(0x1400, SMI, UnknownException)

	STD_EXCEPTION(0x1500, Trap_15, UnknownException)
	STD_EXCEPTION(0x1600, Trap_16, UnknownException)
	STD_EXCEPTION(0x1700, Trap_17, UnknownException)
	STD_EXCEPTION(0x1800, Trap_18, UnknownException)
	STD_EXCEPTION(0x1900, Trap_19, UnknownException)
	STD_EXCEPTION(0x1a00, Trap_1a, UnknownException)
	STD_EXCEPTION(0x1b00, Trap_1b, UnknownException)
	STD_EXCEPTION(0x1c00, Trap_1c, UnknownException)
	STD_EXCEPTION(0x1d00, Trap_1d, UnknownException)
	STD_EXCEPTION(0x1e00, Trap_1e, UnknownException)
	STD_EXCEPTION(0x1f00, Trap_1f, UnknownException)
	STD_EXCEPTION(0x2000, Trap_20, UnknownException)
	STD_EXCEPTION(0x2100, Trap_21, UnknownException)
	STD_EXCEPTION(0x2200, Trap_22, UnknownException)
	STD_EXCEPTION(0x2300, Trap_23, UnknownException)
	STD_EXCEPTION(0x2400, Trap_24, UnknownException)
	STD_EXCEPTION(0x2500, Trap_25, UnknownException)
	STD_EXCEPTION(0x2600, Trap_26, UnknownException)
	STD_EXCEPTION(0x2700, Trap_27, UnknownException)
	STD_EXCEPTION(0x2800, Trap_28, UnknownException)
	STD_EXCEPTION(0x2900, Trap_29, UnknownException)
	STD_EXCEPTION(0x2a00, Trap_2a, UnknownException)
	STD_EXCEPTION(0x2b00, Trap_2b, UnknownException)
	STD_EXCEPTION(0x2c00, Trap_2c, UnknownException)
	STD_EXCEPTION(0x2d00, Trap_2d, UnknownException)
	STD_EXCEPTION(0x2e00, Trap_2e, UnknownException)
	STD_EXCEPTION(0x2f00, Trap_2f, UnknownException)


	.globl _end_of_vectors
	_end_of_vectors:

	. = 0x3000

	/*
	* This code finishes saving the registers to the exception frame
	* and jumps to the appropriate handler for the exception.
	* Register r21 is pointer into trap frame, r1 has new stack pointer.
	*/
	.globl transfer_to_handler
	transfer_to_handler:
	stw r22,_NIP(r21)
	lis r22,MSR_POW@h
	andc r23,r23,r22
	stw r23,_MSR(r21)
	SAVE_GPR(7, r21)
	SAVE_4GPRS(8, r21)
	SAVE_8GPRS(12, r21)
	SAVE_8GPRS(24, r21)
	mflr r23
	andi. r24,r23,0x3f00 /* get vector offset */
	stw r24,TRAP(r21)
	li r22,0
	stw r22,RESULT(r21)
	lwz r24,0(r23) /* virtual address of handler */
	lwz r23,4(r23) /* where to go when done */
	mtspr SRR0,r24
	mtspr SRR1,r20
	mtlr r23
	SYNC
	rfi /* jump to handler, enable MMU */

	int_return:
	mfmsr r28 /* Disable interrupts */
	li r4,0
	ori r4,r4,MSR_EE
	andc r28,r28,r4
	SYNC /* Some chip revs need this... */
	mtmsr r28
	SYNC
	lwz r2,_CTR(r1)
	lwz r0,_LINK(r1)
	mtctr r2
	mtlr r0
	lwz r2,_XER(r1)
	lwz r0,_CCR(r1)
	mtspr XER,r2
	mtcrf 0xFF,r0
	REST_10GPRS(3, r1)
	REST_10GPRS(13, r1)
	REST_8GPRS(23, r1)
	REST_GPR(31, r1)
	lwz r2,_NIP(r1) /* Restore environment */
	lwz r0,_MSR(r1)
	mtspr SRR0,r2
	mtspr SRR1,r0
	lwz r0,GPR0(r1)
	lwz r2,GPR2(r1)
	lwz r1,GPR1(r1)
	SYNC
	rfi
	#endif /* CONFIG_SPL_BUILD */

	/*
	* This code initialises the MPC5xxx processor core
	* (conforms to PowerPC 603e spec)
	* Note: expects original MSR contents to be in r5.
	*/

	.globl init_5xx_core
	init_5xxx_core:

	/* Initialize machine status; enable machine check interrupt */
	/--------------------------------------------------------------/

	li r3, MSR_KERNEL /* Set ME and RI flags */
	rlwimi r3, r5, 0, 25, 25 /* preserve IP bit set by HRCW */
	#ifdef DEBUG
	rlwimi r3, r5, 0, 21, 22 /* debugger might set SE & BE bits */
	#endif
	SYNC /* Some chip revs need this... */
	mtmsr r3
	SYNC
	mtspr SRR1, r3 /* Make SRR1 match MSR */

	/* Initialize the Hardware Implementation-dependent Registers */
	/* HID0 also contains cache control */
	/--------------------------------------------------------------/

	lis r3, CONFIG_SYS_HID0_INIT@h
	ori r3, r3, CONFIG_SYS_HID0_INIT@l
	SYNC
	mtspr HID0, r3

	lis r3, CONFIG_SYS_HID0_FINAL@h
	ori r3, r3, CONFIG_SYS_HID0_FINAL@l
	SYNC
	mtspr HID0, r3

	/* clear all BAT's */
	/--------------------------------------------------------------/

	li r0, 0
	mtspr DBAT0U, r0
	mtspr DBAT0L, r0
	mtspr DBAT1U, r0
	mtspr DBAT1L, r0
	mtspr DBAT2U, r0
	mtspr DBAT2L, r0
	mtspr DBAT3U, r0
	mtspr DBAT3L, r0
	mtspr DBAT4U, r0
	mtspr DBAT4L, r0
	mtspr DBAT5U, r0
	mtspr DBAT5L, r0
	mtspr DBAT6U, r0
	mtspr DBAT6L, r0
	mtspr DBAT7U, r0
	mtspr DBAT7L, r0
	mtspr IBAT0U, r0
	mtspr IBAT0L, r0
	mtspr IBAT1U, r0
	mtspr IBAT1L, r0
	mtspr IBAT2U, r0
	mtspr IBAT2L, r0
	mtspr IBAT3U, r0
	mtspr IBAT3L, r0
	mtspr IBAT4U, r0
	mtspr IBAT4L, r0
	mtspr IBAT5U, r0
	mtspr IBAT5L, r0
	mtspr IBAT6U, r0
	mtspr IBAT6L, r0
	mtspr IBAT7U, r0
	mtspr IBAT7L, r0
	SYNC

	/* invalidate all tlb's */
	/* */
	/* From the 603e User Manual: "The 603e provides the ability to */
	/* invalidate a TLB entry. The TLB Invalidate Entry (tlbie) */
	/* instruction invalidates the TLB entry indexed by the EA, and */
	/* operates on both the instruction and data TLBs simultaneously*/
	/* invalidating four TLB entries (both sets in each TLB). The */
	/* index corresponds to bits 15-19 of the EA. To invalidate all */
	/* entries within both TLBs, 32 tlbie instructions should be */
	/* issued, incrementing this field by one each time." */
	/* */
	/* "Note that the tlbia instruction is not implemented on the */
	/* 603e." */
	/* */
	/* bits 15-19 correspond to addresses 0x00000000 to 0x0001F000 */
	/* incrementing by 0x1000 each time. The code below is sort of */
	/* based on code in "flush_tlbs" from arch/powerpc/kernel/head.S */
	/* */
	/--------------------------------------------------------------/

	li r3, 32
	mtctr r3
	li r3, 0
	1: tlbie r3
	addi r3, r3, 0x1000
	bdnz 1b
	SYNC

	/* Done! */
	/--------------------------------------------------------------/

	blr

	/* Cache functions.
	*
	* Note: requires that all cache bits in
	* HID0 are in the low half word.
	*/
	.globl icache_enable
	icache_enable:
	mfspr r3, HID0
	ori r3, r3, HID0_ICE
	lis r4, 0
	ori r4, r4, HID0_ILOCK
	andc r3, r3, r4
	ori r4, r3, HID0_ICFI
	isync
	mtspr HID0, r4 /* sets enable and invalidate, clears lock */
	isync
	mtspr HID0, r3 /* clears invalidate */
	blr

	.globl icache_disable
	icache_disable:
	mfspr r3, HID0
	lis r4, 0
	ori r4, r4, HID0_ICE\|HID0_ILOCK
	andc r3, r3, r4
	ori r4, r3, HID0_ICFI
	isync
	mtspr HID0, r4 /* sets invalidate, clears enable and lock */
	isync
	mtspr HID0, r3 /* clears invalidate */
	blr

	.globl icache_status
	icache_status:
	mfspr r3, HID0
	rlwinm r3, r3, HID0_ICE_BITPOS + 1, 31, 31
	blr

	.globl dcache_enable
	dcache_enable:
	mfspr r3, HID0
	ori r3, r3, HID0_DCE
	lis r4, 0
	ori r4, r4, HID0_DLOCK
	andc r3, r3, r4
	ori r4, r3, HID0_DCI
	sync
	mtspr HID0, r4 /* sets enable and invalidate, clears lock */
	sync
	mtspr HID0, r3 /* clears invalidate */
	blr

	.globl dcache_disable
	dcache_disable:
	mfspr r3, HID0
	lis r4, 0
	ori r4, r4, HID0_DCE\|HID0_DLOCK
	andc r3, r3, r4
	ori r4, r3, HID0_DCI
	sync
	mtspr HID0, r4 /* sets invalidate, clears enable and lock */
	sync
	mtspr HID0, r3 /* clears invalidate */
	blr

	.globl dcache_status
	dcache_status:
	mfspr r3, HID0
	rlwinm r3, r3, HID0_DCE_BITPOS + 1, 31, 31
	blr

	.globl get_svr
	get_svr:
	mfspr r3, SVR
	blr

	.globl get_pvr
	get_pvr:
	mfspr r3, PVR
	blr

	#ifndef CONFIG_SPL_BUILD
	/------------------------------------------------------------------------------/

	/*
	* void relocate_code (addr_sp, gd, addr_moni)
	*
	* This "function" does not return, instead it continues in RAM
	* after relocating the monitor code.
	*
	* r3 = dest
	* r4 = src
	* r5 = length in bytes
	* r6 = cachelinesize
	*/
	.globl relocate_code
	relocate_code:
	mr r1, r3 /* Set new stack pointer */
	mr r9, r4 /* Save copy of Global Data pointer */
	mr r10, r5 /* Save copy of Destination Address */

	GET_GOT
	mr r3, r5 /* Destination Address */
	lis r4, CONFIG_SYS_MONITOR_BASE@h /* Source Address */
	ori r4, r4, CONFIG_SYS_MONITOR_BASE@l
	lwz r5, GOT(__init_end)
	sub r5, r5, r4
	li r6, CONFIG_SYS_CACHELINE_SIZE /* Cache Line Size */

	/*
	* Fix GOT pointer:
	*
	* New GOT-PTR = (old GOT-PTR - CONFIG_SYS_MONITOR_BASE) + Destination Address
	*
	* Offset:
	*/
	sub r15, r10, r4

	/* First our own GOT */
	add r12, r12, r15
	/* then the one used by the C code */
	add r30, r30, r15

	/*
	* Now relocate code
	*/

	cmplw cr1,r3,r4
	addi r0,r5,3
	srwi. r0,r0,2
	beq cr1,4f /* In place copy is not necessary */
	beq 7f /* Protect against 0 count */
	mtctr r0
	bge cr1,2f

	la r8,-4(r4)
	la r7,-4(r3)
	1: lwzu r0,4(r8)
	stwu r0,4(r7)
	bdnz 1b
	b 4f

	2: slwi r0,r0,2
	add r8,r4,r0
	add r7,r3,r0
	3: lwzu r0,-4(r8)
	stwu r0,-4(r7)
	bdnz 3b

	/*
	* Now flush the cache: note that we must start from a cache aligned
	* address. Otherwise we might miss one cache line.
	*/
	4: cmpwi r6,0
	add r5,r3,r5
	beq 7f /* Always flush prefetch queue in any case */
	subi r0,r6,1
	andc r3,r3,r0
	mfspr r7,HID0 /* don't do dcbst if dcache is disabled */
	rlwinm r7,r7,HID0_DCE_BITPOS+1,31,31
	cmpwi r7,0
	beq 9f
	mr r4,r3
	5: dcbst 0,r4
	add r4,r4,r6
	cmplw r4,r5
	blt 5b
	sync /* Wait for all dcbst to complete on bus */
	9: mfspr r7,HID0 /* don't do icbi if icache is disabled */
	rlwinm r7,r7,HID0_ICE_BITPOS+1,31,31
	cmpwi r7,0
	beq 7f
	mr r4,r3
	6: icbi 0,r4
	add r4,r4,r6
	cmplw r4,r5
	blt 6b
	7: sync /* Wait for all icbi to complete on bus */
	isync

	/*
	* We are done. Do not return, instead branch to second part of board
	* initialization, now running from RAM.
	*/

	addi r0, r10, in_ram - _start + EXC_OFF_SYS_RESET
	mtlr r0
	blr

	in_ram:

	/*
	* Relocation Function, r12 point to got2+0x8000
	*
	* Adjust got2 pointers, no need to check for 0, this code
	* already puts a few entries in the table.
	*/
	li r0,__got2_entries@sectoff@l
	la r3,GOT(_GOT2_TABLE_)
	lwz r11,GOT(_GOT2_TABLE_)
	mtctr r0
	sub r11,r3,r11
	addi r3,r3,-4
	1: lwzu r0,4(r3)
	cmpwi r0,0
	beq- 2f
	add r0,r0,r11
	stw r0,0(r3)
	2: bdnz 1b

	/*
	* Now adjust the fixups and the pointers to the fixups
	* in case we need to move ourselves again.
	*/
	li r0,__fixup_entries@sectoff@l
	lwz r3,GOT(_FIXUP_TABLE_)
	cmpwi r0,0
	mtctr r0
	addi r3,r3,-4
	beq 4f
	3: lwzu r4,4(r3)
	lwzux r0,r4,r11
	cmpwi r0,0
	add r0,r0,r11
	stw r4,0(r3)
	beq- 5f
	stw r0,0(r4)
	5: bdnz 3b
	4:
	clear_bss:
	/*
	* Now clear BSS segment
	*/
	lwz r3,GOT(__bss_start)
	lwz r4,GOT(__bss_end)

	cmplw 0, r3, r4
	beq 6f

	li r0, 0
	5:
	stw r0, 0(r3)
	addi r3, r3, 4
	cmplw 0, r3, r4
	bne 5b
	6:

	mr r3, r9 /* Global Data pointer */
	mr r4, r10 /* Destination Address */
	bl board_init_r

	/*
	* Copy exception vector code to low memory
	*
	* r3: dest_addr
	* r7: source address, r8: end address, r9: target address
	*/
	.globl trap_init
	trap_init:
	mflr r4 /* save link register */
	GET_GOT
	lwz r7, GOT(_start)
	lwz r8, GOT(_end_of_vectors)

	li r9, 0x100 /* reset vector always at 0x100 */

	cmplw 0, r7, r8
	bgelr /* return if r7>=r8 - just in case */
	1:
	lwz r0, 0(r7)
	stw r0, 0(r9)
	addi r7, r7, 4
	addi r9, r9, 4
	cmplw 0, r7, r8
	bne 1b

	/*
	* relocate `hdlr' and `int_return' entries
	*/
	li r7, .L_MachineCheck - _start + EXC_OFF_SYS_RESET
	li r8, Alignment - _start + EXC_OFF_SYS_RESET
	2:
	bl trap_reloc
	addi r7, r7, 0x100 /* next exception vector */
	cmplw 0, r7, r8
	blt 2b

	li r7, .L_Alignment - _start + EXC_OFF_SYS_RESET
	bl trap_reloc

	li r7, .L_ProgramCheck - _start + EXC_OFF_SYS_RESET
	bl trap_reloc

	li r7, .L_FPUnavailable - _start + EXC_OFF_SYS_RESET
	li r8, SystemCall - _start + EXC_OFF_SYS_RESET
	3:
	bl trap_reloc
	addi r7, r7, 0x100 /* next exception vector */
	cmplw 0, r7, r8
	blt 3b

	li r7, .L_SingleStep - _start + EXC_OFF_SYS_RESET
	li r8, _end_of_vectors - _start + EXC_OFF_SYS_RESET
	4:
	bl trap_reloc
	addi r7, r7, 0x100 /* next exception vector */
	cmplw 0, r7, r8
	blt 4b

	mfmsr r3 /* now that the vectors have */
	lis r7, MSR_IP@h /* relocated into low memory */
	ori r7, r7, MSR_IP@l /* MSR[IP] can be turned off */
	andc r3, r3, r7 /* (if it was on) */
	SYNC /* Some chip revs need this... */
	mtmsr r3
	SYNC

	mtlr r4 /* restore link register */
	blr

	#endif /* CONFIG_SPL_BUILD */