| /* |
| * NAND boot for Freescale Integrated Flash Controller, NAND FCM |
| * |
| * Copyright 2011 Freescale Semiconductor, Inc. |
| * Author: Dipen Dudhat <dipen.dudhat@freescale.com> |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #include <common.h> |
| #include <asm/io.h> |
| #include <fsl_ifc.h> |
| #include <linux/mtd/nand.h> |
| |
| static inline int is_blank(uchar *addr, int page_size) |
| { |
| int i; |
| |
| for (i = 0; i < page_size; i++) { |
| if (__raw_readb(&addr[i]) != 0xff) |
| return 0; |
| } |
| |
| /* |
| * For the SPL, don't worry about uncorrectable errors |
| * where the main area is all FFs but shouldn't be. |
| */ |
| return 1; |
| } |
| |
| /* returns nonzero if entire page is blank */ |
| static inline int check_read_ecc(uchar *buf, u32 *eccstat, |
| unsigned int bufnum, int page_size) |
| { |
| u32 reg = eccstat[bufnum / 4]; |
| int errors = (reg >> ((3 - bufnum % 4) * 8)) & 0xf; |
| |
| if (errors == 0xf) { /* uncorrectable */ |
| /* Blank pages fail hw ECC checks */ |
| if (is_blank(buf, page_size)) |
| return 1; |
| |
| puts("ecc error\n"); |
| for (;;) |
| ; |
| } |
| |
| return 0; |
| } |
| |
| static inline struct fsl_ifc_runtime *runtime_regs_address(void) |
| { |
| struct fsl_ifc regs = {(void *)CONFIG_SYS_IFC_ADDR, NULL}; |
| int ver = 0; |
| |
| ver = ifc_in32(®s.gregs->ifc_rev); |
| if (ver >= FSL_IFC_V2_0_0) |
| regs.rregs = (void *)CONFIG_SYS_IFC_ADDR + IFC_RREGS_64KOFFSET; |
| else |
| regs.rregs = (void *)CONFIG_SYS_IFC_ADDR + IFC_RREGS_4KOFFSET; |
| |
| return regs.rregs; |
| } |
| |
| static inline void nand_wait(uchar *buf, int bufnum, int page_size) |
| { |
| struct fsl_ifc_runtime *ifc = runtime_regs_address(); |
| u32 status; |
| u32 eccstat[8]; |
| int bufperpage = page_size / 512; |
| int bufnum_end, i; |
| |
| bufnum *= bufperpage; |
| bufnum_end = bufnum + bufperpage - 1; |
| |
| do { |
| status = ifc_in32(&ifc->ifc_nand.nand_evter_stat); |
| } while (!(status & IFC_NAND_EVTER_STAT_OPC)); |
| |
| if (status & IFC_NAND_EVTER_STAT_FTOER) { |
| puts("flash time out error\n"); |
| for (;;) |
| ; |
| } |
| |
| for (i = bufnum / 4; i <= bufnum_end / 4; i++) |
| eccstat[i] = ifc_in32(&ifc->ifc_nand.nand_eccstat[i]); |
| |
| for (i = bufnum; i <= bufnum_end; i++) { |
| if (check_read_ecc(buf, eccstat, i, page_size)) |
| break; |
| } |
| |
| ifc_out32(&ifc->ifc_nand.nand_evter_stat, status); |
| } |
| |
| static inline int bad_block(uchar *marker, int port_size) |
| { |
| if (port_size == 8) |
| return __raw_readb(marker) != 0xff; |
| else |
| return __raw_readw((u16 *)marker) != 0xffff; |
| } |
| |
| int nand_spl_load_image(uint32_t offs, unsigned int uboot_size, void *vdst) |
| { |
| struct fsl_ifc_fcm *gregs = (void *)CONFIG_SYS_IFC_ADDR; |
| struct fsl_ifc_runtime *ifc = NULL; |
| uchar *buf = (uchar *)CONFIG_SYS_NAND_BASE; |
| int page_size; |
| int port_size; |
| int pages_per_blk; |
| int blk_size; |
| int bad_marker = 0; |
| int bufnum_mask, bufnum, ver = 0; |
| |
| int csor, cspr; |
| int pos = 0; |
| int j = 0; |
| |
| int sram_addr; |
| int pg_no; |
| uchar *dst = vdst; |
| |
| ifc = runtime_regs_address(); |
| |
| /* Get NAND Flash configuration */ |
| csor = CONFIG_SYS_NAND_CSOR; |
| cspr = CONFIG_SYS_NAND_CSPR; |
| |
| port_size = (cspr & CSPR_PORT_SIZE_16) ? 16 : 8; |
| |
| if ((csor & CSOR_NAND_PGS_MASK) == CSOR_NAND_PGS_8K) { |
| page_size = 8192; |
| bufnum_mask = 0x0; |
| } else if ((csor & CSOR_NAND_PGS_MASK) == CSOR_NAND_PGS_4K) { |
| page_size = 4096; |
| bufnum_mask = 0x1; |
| } else if ((csor & CSOR_NAND_PGS_MASK) == CSOR_NAND_PGS_2K) { |
| page_size = 2048; |
| bufnum_mask = 0x3; |
| } else { |
| page_size = 512; |
| bufnum_mask = 0xf; |
| |
| if (port_size == 8) |
| bad_marker = 5; |
| } |
| |
| ver = ifc_in32(&gregs->ifc_rev); |
| if (ver >= FSL_IFC_V2_0_0) |
| bufnum_mask = (bufnum_mask * 2) + 1; |
| |
| pages_per_blk = |
| 32 << ((csor & CSOR_NAND_PB_MASK) >> CSOR_NAND_PB_SHIFT); |
| |
| blk_size = pages_per_blk * page_size; |
| |
| /* Open Full SRAM mapping for spare are access */ |
| ifc_out32(&ifc->ifc_nand.ncfgr, 0x0); |
| |
| /* Clear Boot events */ |
| ifc_out32(&ifc->ifc_nand.nand_evter_stat, 0xffffffff); |
| |
| /* Program FIR/FCR for Large/Small page */ |
| if (page_size > 512) { |
| ifc_out32(&ifc->ifc_nand.nand_fir0, |
| (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) | |
| (IFC_FIR_OP_CA0 << IFC_NAND_FIR0_OP1_SHIFT) | |
| (IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP2_SHIFT) | |
| (IFC_FIR_OP_CMD1 << IFC_NAND_FIR0_OP3_SHIFT) | |
| (IFC_FIR_OP_BTRD << IFC_NAND_FIR0_OP4_SHIFT)); |
| ifc_out32(&ifc->ifc_nand.nand_fir1, 0x0); |
| |
| ifc_out32(&ifc->ifc_nand.nand_fcr0, |
| (NAND_CMD_READ0 << IFC_NAND_FCR0_CMD0_SHIFT) | |
| (NAND_CMD_READSTART << IFC_NAND_FCR0_CMD1_SHIFT)); |
| } else { |
| ifc_out32(&ifc->ifc_nand.nand_fir0, |
| (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) | |
| (IFC_FIR_OP_CA0 << IFC_NAND_FIR0_OP1_SHIFT) | |
| (IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP2_SHIFT) | |
| (IFC_FIR_OP_BTRD << IFC_NAND_FIR0_OP3_SHIFT)); |
| ifc_out32(&ifc->ifc_nand.nand_fir1, 0x0); |
| |
| ifc_out32(&ifc->ifc_nand.nand_fcr0, |
| NAND_CMD_READ0 << IFC_NAND_FCR0_CMD0_SHIFT); |
| } |
| |
| /* Program FBCR = 0 for full page read */ |
| ifc_out32(&ifc->ifc_nand.nand_fbcr, 0); |
| |
| /* Read and copy u-boot on SDRAM from NAND device, In parallel |
| * check for Bad block if found skip it and read continue to |
| * next Block |
| */ |
| while (pos < uboot_size) { |
| int i = 0; |
| do { |
| pg_no = offs / page_size; |
| bufnum = pg_no & bufnum_mask; |
| sram_addr = bufnum * page_size * 2; |
| |
| ifc_out32(&ifc->ifc_nand.row0, pg_no); |
| ifc_out32(&ifc->ifc_nand.col0, 0); |
| /* start read */ |
| ifc_out32(&ifc->ifc_nand.nandseq_strt, |
| IFC_NAND_SEQ_STRT_FIR_STRT); |
| |
| /* wait for read to complete */ |
| nand_wait(&buf[sram_addr], bufnum, page_size); |
| |
| /* |
| * If either of the first two pages are marked bad, |
| * continue to the next block. |
| */ |
| if (i++ < 2 && |
| bad_block(&buf[sram_addr + page_size + bad_marker], |
| port_size)) { |
| puts("skipping\n"); |
| offs = (offs + blk_size) & ~(blk_size - 1); |
| pos &= ~(blk_size - 1); |
| break; |
| } |
| |
| for (j = 0; j < page_size; j++) |
| dst[pos + j] = __raw_readb(&buf[sram_addr + j]); |
| |
| pos += page_size; |
| offs += page_size; |
| } while ((offs & (blk_size - 1)) && (pos < uboot_size)); |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * Main entrypoint for NAND Boot. It's necessary that SDRAM is already |
| * configured and available since this code loads the main U-boot image |
| * from NAND into SDRAM and starts from there. |
| */ |
| void nand_boot(void) |
| { |
| __attribute__((noreturn)) void (*uboot)(void); |
| /* |
| * Load U-Boot image from NAND into RAM |
| */ |
| nand_spl_load_image(CONFIG_SYS_NAND_U_BOOT_OFFS, |
| CONFIG_SYS_NAND_U_BOOT_SIZE, |
| (uchar *)CONFIG_SYS_NAND_U_BOOT_DST); |
| |
| #ifdef CONFIG_NAND_ENV_DST |
| nand_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE, |
| (uchar *)CONFIG_NAND_ENV_DST); |
| |
| #ifdef CONFIG_ENV_OFFSET_REDUND |
| nand_spl_load_image(CONFIG_ENV_OFFSET_REDUND, CONFIG_ENV_SIZE, |
| (uchar *)CONFIG_NAND_ENV_DST + CONFIG_ENV_SIZE); |
| #endif |
| #endif |
| /* |
| * Jump to U-Boot image |
| */ |
| #ifdef CONFIG_SPL_FLUSH_IMAGE |
| /* |
| * Clean d-cache and invalidate i-cache, to |
| * make sure that no stale data is executed. |
| */ |
| flush_cache(CONFIG_SYS_NAND_U_BOOT_DST, CONFIG_SYS_NAND_U_BOOT_SIZE); |
| #endif |
| uboot = (void *)CONFIG_SYS_NAND_U_BOOT_START; |
| uboot(); |
| } |
| |
| #ifndef CONFIG_SPL_NAND_INIT |
| void nand_init(void) |
| { |
| } |
| |
| void nand_deselect(void) |
| { |
| } |
| #endif |