| /* |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| #include <asm-offsets.h> |
| #include <ppc_asm.tmpl> |
| #include <asm/mmu.h> |
| #include <config.h> |
| |
| /************************************************************************** |
| * TLB TABLE |
| * |
| * This table is used by the cpu boot code to setup the initial tlb |
| * entries. Rather than make broad assumptions in the cpu source tree, |
| * this table lets each board set things up however they like. |
| * |
| * Pointer to the table is returned in r1 |
| * |
| *************************************************************************/ |
| .section .bootpg,"ax" |
| .globl tlbtab |
| |
| tlbtab: |
| tlbtab_start |
| |
| /* |
| * BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to use the |
| * speed up boot process. It is patched after relocation to enable SA_I |
| */ |
| tlbentry( 0xF0000000, SZ_256M, 0xF0000000, 1, AC_RWX | SA_G ) |
| |
| /* |
| * TLB entries for SDRAM are not needed on this platform. They are |
| * generated dynamically in the SPD DDR2 detection routine. |
| */ |
| |
| #ifdef CONFIG_SYS_INIT_RAM_DCACHE |
| /* TLB-entry for init-ram in dcache (SA_I must be turned off!) */ |
| tlbentry( CONFIG_SYS_INIT_RAM_ADDR, SZ_64K, CONFIG_SYS_INIT_RAM_ADDR, 0, |
| AC_RWX | SA_G ) |
| #endif |
| |
| /* TLB-entry for PCI Memory */ |
| tlbentry( CONFIG_SYS_PCI_MEMBASE + 0x00000000, SZ_256M, |
| CONFIG_SYS_PCI_MEMBASE + 0x00000000, 1, AC_RW | SA_IG ) |
| |
| tlbentry( CONFIG_SYS_PCI_MEMBASE + 0x10000000, SZ_256M, |
| CONFIG_SYS_PCI_MEMBASE + 0x10000000, 1, AC_RW | SA_IG ) |
| |
| tlbentry( CONFIG_SYS_PCI_MEMBASE + 0x20000000, SZ_256M, |
| CONFIG_SYS_PCI_MEMBASE + 0x20000000, 1, AC_RW | SA_IG ) |
| |
| tlbentry( CONFIG_SYS_PCI_MEMBASE + 0x30000000, SZ_256M, |
| CONFIG_SYS_PCI_MEMBASE + 0x30000000, 1, AC_RW | SA_IG ) |
| |
| /* TLB-entry for EBC */ |
| tlbentry( CONFIG_SYS_CPLD_BASE, SZ_1K, CONFIG_SYS_CPLD_BASE, 1, AC_RW | SA_IG ) |
| |
| /* TLB-entry for Internal Registers & OCM */ |
| /* I wonder why this must be executable -- lrj@acm.org 2007-10-08 */ |
| tlbentry( 0xE0000000, SZ_16M, 0xE0000000, 0, AC_RWX | SA_I ) |
| |
| /*TLB-entry PCI registers*/ |
| tlbentry( 0xEEC00000, SZ_1K, 0xEEC00000, 1, AC_RW | SA_IG ) |
| |
| /* TLB-entry for peripherals */ |
| tlbentry( 0xEF000000, SZ_16M, 0xEF000000, 1, AC_RW | SA_IG) |
| |
| /* TLB-entry PCI IO Space - from sr@denx.de */ |
| tlbentry(0xE8000000, SZ_64K, 0xE8000000, 1, AC_RW | SA_IG) |
| |
| tlbtab_end |
| |
| #if defined(CONFIG_KORAT_PERMANENT) |
| .globl korat_branch_absolute |
| korat_branch_absolute: |
| mtlr r3 |
| blr |
| #endif |