| /* |
| * Copyright (C) 2004 Arabella Software Ltd. |
| * Yuli Barcohen <yuli@arabellasw.com> |
| * |
| * Support for Interphase iSPAN Communications Controllers |
| * (453x and others). Tested on 4532. |
| * |
| * Derived from iSPAN 4539 port (iphase4539) by |
| * Wolfgang Grandegger <wg@denx.de> |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| #include <common.h> |
| #include <ioports.h> |
| #include <mpc8260.h> |
| #include <asm/io.h> |
| |
| /* |
| * I/O Ports configuration table |
| * |
| * If conf is 1, then that port pin will be configured at boot time |
| * according to the five values podr/pdir/ppar/psor/pdat for that entry |
| */ |
| |
| #define CONFIG_SYS_FCC1 (CONFIG_ETHER_INDEX == 1) |
| #define CONFIG_SYS_FCC2 (CONFIG_ETHER_INDEX == 2) |
| #define CONFIG_SYS_FCC3 (CONFIG_ETHER_INDEX == 3) |
| |
| const iop_conf_t iop_conf_tab[4][32] = { |
| /* Port A */ |
| { /* conf ppar psor pdir podr pdat */ |
| /* PA31 */ { CONFIG_SYS_FCC1, 1, 1, 0, 0, 0 }, /* FCC1 MII COL */ |
| /* PA30 */ { CONFIG_SYS_FCC1, 1, 1, 0, 0, 0 }, /* FCC1 MII CRS */ |
| /* PA29 */ { CONFIG_SYS_FCC1, 1, 1, 1, 0, 0 }, /* FCC1 MII TX_ER */ |
| /* PA28 */ { CONFIG_SYS_FCC1, 1, 1, 1, 0, 0 }, /* FCC1 MII TX_EN */ |
| /* PA27 */ { CONFIG_SYS_FCC1, 1, 1, 0, 0, 0 }, /* FCC1 MII RX_DV */ |
| /* PA26 */ { CONFIG_SYS_FCC1, 1, 1, 0, 0, 0 }, /* FCC1 MII RX_ER */ |
| /* PA25 */ { 0, 0, 0, 0, 0, 0 }, /* PA25 */ |
| /* PA24 */ { 0, 0, 0, 0, 0, 0 }, /* PA24 */ |
| /* PA23 */ { 0, 0, 0, 0, 0, 0 }, /* PA23 */ |
| /* PA22 */ { 0, 0, 0, 0, 0, 0 }, /* PA22 */ |
| /* PA21 */ { CONFIG_SYS_FCC1, 1, 0, 1, 0, 0 }, /* FCC1 MII TxD[3] */ |
| /* PA20 */ { CONFIG_SYS_FCC1, 1, 0, 1, 0, 0 }, /* FCC1 MII TxD[2] */ |
| /* PA19 */ { CONFIG_SYS_FCC1, 1, 0, 1, 0, 0 }, /* FCC1 MII TxD[1] */ |
| /* PA18 */ { CONFIG_SYS_FCC1, 1, 0, 1, 0, 0 }, /* FCC1 MII TxD[0] */ |
| /* PA17 */ { CONFIG_SYS_FCC1, 1, 0, 0, 0, 0 }, /* FCC1 MII RxD[0] */ |
| /* PA16 */ { CONFIG_SYS_FCC1, 1, 0, 0, 0, 0 }, /* FCC1 MII RxD[1] */ |
| /* PA15 */ { CONFIG_SYS_FCC1, 1, 0, 0, 0, 0 }, /* FCC1 MII RxD[2] */ |
| /* PA14 */ { CONFIG_SYS_FCC1, 1, 0, 0, 0, 0 }, /* FCC1 MII RxD[3] */ |
| /* PA13 */ { 0, 0, 0, 0, 0, 0 }, /* PA13 */ |
| /* PA12 */ { 0, 0, 0, 0, 0, 0 }, /* PA12 */ |
| /* PA11 */ { 0, 0, 0, 0, 0, 0 }, /* PA11 */ |
| /* PA10 */ { 0, 0, 0, 0, 0, 0 }, /* PA10 */ |
| /* PA9 */ { 0, 1, 0, 1, 0, 0 }, /* SMC2 SMTXD */ |
| /* PA8 */ { 0, 1, 0, 0, 0, 0 }, /* SMC2 SMRXD */ |
| /* PA7 */ { 0, 0, 0, 0, 0, 0 }, /* PA7 */ |
| /* PA6 */ { 0, 0, 0, 0, 0, 0 }, /* PA6 */ |
| /* PA5 */ { 0, 0, 0, 0, 0, 0 }, /* PA5 */ |
| /* PA4 */ { 0, 0, 0, 0, 0, 0 }, /* PA4 */ |
| /* PA3 */ { 0, 0, 0, 0, 0, 0 }, /* PA3 */ |
| /* PA2 */ { 0, 0, 0, 0, 0, 0 }, /* PA2 */ |
| /* PA1 */ { 0, 0, 0, 0, 0, 0 }, /* PA1 */ |
| /* PA0 */ { 0, 0, 0, 0, 0, 0 } /* PA0 */ |
| }, |
| |
| /* Port B */ |
| { /* conf ppar psor pdir podr pdat */ |
| /* PB31 */ { CONFIG_SYS_FCC2, 1, 0, 1, 0, 0 }, /* FCC2 MII TX_ER */ |
| /* PB30 */ { CONFIG_SYS_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_DV */ |
| /* PB29 */ { CONFIG_SYS_FCC2, 1, 1, 1, 0, 0 }, /* FCC2 MII TX_EN */ |
| /* PB28 */ { CONFIG_SYS_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_ER */ |
| /* PB27 */ { CONFIG_SYS_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII COL */ |
| /* PB26 */ { CONFIG_SYS_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII CRS */ |
| /* PB25 */ { CONFIG_SYS_FCC2, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[3] */ |
| /* PB24 */ { CONFIG_SYS_FCC2, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[2] */ |
| /* PB23 */ { CONFIG_SYS_FCC2, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[1] */ |
| /* PB22 */ { CONFIG_SYS_FCC2, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[0] */ |
| /* PB21 */ { CONFIG_SYS_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[0] */ |
| /* PB20 */ { CONFIG_SYS_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[1] */ |
| /* PB19 */ { CONFIG_SYS_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[2] */ |
| /* PB18 */ { CONFIG_SYS_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[3] */ |
| /* PB17 */ { CONFIG_SYS_FCC3, 1, 0, 0, 0, 0 }, /* FCC3 MII RX_DV */ |
| /* PB16 */ { CONFIG_SYS_FCC3, 1, 0, 0, 0, 0 }, /* FCC3 MII RX_ER */ |
| /* PB15 */ { CONFIG_SYS_FCC3, 1, 0, 1, 0, 0 }, /* FCC3 MII TX_ER */ |
| /* PB14 */ { CONFIG_SYS_FCC3, 1, 0, 1, 0, 0 }, /* FCC3 MII TX_EN */ |
| /* PB13 */ { CONFIG_SYS_FCC3, 1, 0, 0, 0, 0 }, /* FCC3 MII COL */ |
| /* PB12 */ { CONFIG_SYS_FCC3, 1, 0, 0, 0, 0 }, /* FCC3 MII CRS */ |
| /* PB11 */ { CONFIG_SYS_FCC3, 1, 0, 0, 0, 0 }, /* FCC3 MII RxD[3] */ |
| /* PB10 */ { CONFIG_SYS_FCC3, 1, 0, 0, 0, 0 }, /* FCC3 MII RxD[2] */ |
| /* PB9 */ { CONFIG_SYS_FCC3, 1, 0, 0, 0, 0 }, /* FCC3 MII RxD[1] */ |
| /* PB8 */ { CONFIG_SYS_FCC3, 1, 0, 0, 0, 0 }, /* FCC3 MII RxD[0] */ |
| /* PB7 */ { CONFIG_SYS_FCC3, 1, 0, 1, 0, 0 }, /* FCC3 MII TxD[0] */ |
| /* PB6 */ { CONFIG_SYS_FCC3, 1, 0, 1, 0, 0 }, /* FCC3 MII TxD[1] */ |
| /* PB5 */ { CONFIG_SYS_FCC3, 1, 0, 1, 0, 0 }, /* FCC3 MII TxD[2] */ |
| /* PB4 */ { CONFIG_SYS_FCC3, 1, 0, 1, 0, 0 }, /* FCC3 MII TxD[3] */ |
| /* PB3 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ |
| /* PB2 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ |
| /* PB1 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ |
| /* PB0 */ { 0, 0, 0, 0, 0, 0 } /* pin doesn't exist */ |
| }, |
| |
| /* Port C */ |
| { /* conf ppar psor pdir podr pdat */ |
| /* PC31 */ { 0, 0, 0, 0, 0, 0 }, /* PC31 */ |
| /* PC30 */ { 0, 0, 0, 0, 0, 0 }, /* PC30 */ |
| /* PC29 */ { 0, 0, 0, 0, 0, 0 }, /* PC29 */ |
| /* PC28 */ { 0, 0, 0, 0, 0, 0 }, /* PC28 */ |
| /* PC27 */ { 0, 0, 0, 0, 0, 0 }, /* PC27 */ |
| /* PC26 */ { 0, 0, 0, 0, 0, 0 }, /* PC26 */ |
| /* PC25 */ { 0, 0, 0, 0, 0, 0 }, /* PC25 */ |
| /* PC24 */ { 0, 0, 0, 0, 0, 0 }, /* PC24 */ |
| /* PC23 */ { 0, 0, 0, 0, 0, 0 }, /* PC23 */ |
| /* PC22 */ { 0, 0, 0, 0, 0, 0 }, /* PC22 */ |
| /* PC21 */ { 0, 0, 0, 0, 0, 0 }, /* PC21 */ |
| /* PC20 */ { 0, 0, 0, 0, 0, 0 }, /* PC20 */ |
| /* PC19 */ { 0, 0, 0, 0, 0, 0 }, /* PC19 */ |
| /* PC18 */ { CONFIG_SYS_FCC3, 1, 0, 0, 0, 0 }, /* FCC3 MII Rx Clock (CLK14) */ |
| /* PC17 */ { 0, 0, 0, 0, 0, 0 }, /* PC17 */ |
| /* PC16 */ { CONFIG_SYS_FCC3, 1, 0, 0, 0, 0 }, /* FCC3 MII Tx Clock (CLK16) */ |
| /* PC15 */ { 0, 0, 0, 0, 0, 0 }, /* PC15 */ |
| /* PC14 */ { 0, 0, 0, 0, 0, 0 }, /* PC14 */ |
| /* PC13 */ { 0, 0, 0, 0, 0, 0 }, /* PC13 */ |
| /* PC12 */ { 0, 0, 0, 0, 0, 0 }, /* PC12 */ |
| /* PC11 */ { 0, 0, 0, 0, 0, 0 }, /* PC11 */ |
| /* PC10 */ { 0, 0, 0, 0, 0, 0 }, /* PC10 */ |
| /* PC9 */ { 0, 0, 0, 0, 0, 0 }, /* PC9 */ |
| /* PC8 */ { 0, 0, 0, 0, 0, 0 }, /* PC8 */ |
| /* PC7 */ { 0, 0, 0, 0, 0, 0 }, /* PC7 */ |
| /* PC6 */ { 0, 0, 0, 0, 0, 0 }, /* PC6 */ |
| /* PC5 */ { 0, 0, 0, 0, 0, 0 }, /* PC5 */ |
| /* PC4 */ { 0, 0, 0, 0, 0, 0 }, /* PC4 */ |
| /* PC3 */ { 0, 0, 0, 0, 0, 0 }, /* PC3 */ |
| /* PC2 */ { 0, 0, 0, 0, 0, 0 }, /* PC2 */ |
| /* PC1 */ { 0, 0, 0, 0, 0, 0 }, /* PC1 */ |
| /* PC0 */ { 0, 0, 0, 0, 0, 0 } /* PC0 */ |
| }, |
| |
| /* Port D */ |
| { /* conf ppar psor pdir podr pdat */ |
| /* PD31 */ { 0, 0, 0, 0, 0, 0 }, /* PD31 */ |
| /* PD30 */ { 0, 0, 0, 0, 0, 0 }, /* PD30 */ |
| /* PD29 */ { 0, 0, 0, 0, 0, 0 }, /* PD29 */ |
| /* PD28 */ { 0, 0, 0, 0, 0, 0 }, /* PD28 */ |
| /* PD27 */ { 0, 0, 0, 0, 0, 0 }, /* PD27 */ |
| /* PD26 */ { 0, 0, 0, 0, 0, 0 }, /* PD26 */ |
| /* PD25 */ { 0, 0, 0, 0, 0, 0 }, /* PD25 */ |
| /* PD24 */ { 0, 0, 0, 0, 0, 0 }, /* PD24 */ |
| /* PD23 */ { 0, 0, 0, 0, 0, 0 }, /* PD23 */ |
| /* PD22 */ { 0, 0, 0, 0, 0, 0 }, /* PD22 */ |
| /* PD21 */ { 0, 0, 0, 0, 0, 0 }, /* PD21 */ |
| /* PD20 */ { 0, 0, 0, 0, 0, 0 }, /* PD20 */ |
| /* PD19 */ { 0, 0, 0, 0, 0, 0 }, /* PD19 */ |
| /* PD18 */ { 0, 1, 1, 0, 0, 0 }, /* SPICLK */ |
| /* PD17 */ { 0, 1, 1, 0, 0, 0 }, /* SPIMOSI */ |
| /* PD16 */ { 0, 1, 1, 0, 0, 0 }, /* SPIMISO */ |
| /* PD15 */ { 0, 1, 1, 0, 1, 0 }, /* I2C SDA */ |
| /* PD14 */ { 0, 1, 1, 0, 1, 0 }, /* I2C SCL */ |
| /* PD13 */ { 1, 0, 0, 0, 0, 0 }, /* MII MDIO */ |
| /* PD12 */ { 1, 0, 0, 1, 0, 0 }, /* MII MDC */ |
| /* PD11 */ { 0, 0, 0, 0, 0, 0 }, /* PD11 */ |
| /* PD10 */ { 0, 0, 0, 0, 0, 0 }, /* PD10 */ |
| /* PD9 */ { 1, 1, 0, 1, 0, 0 }, /* SMC1 SMTXD */ |
| /* PD8 */ { 1, 1, 0, 0, 0, 0 }, /* SMC1 SMRXD */ |
| /* PD7 */ { 0, 0, 0, 0, 0, 0 }, /* PD7 */ |
| /* PD6 */ { CONFIG_SYS_FCC3, 0, 0, 1, 0, 1 }, /* MII PHY Reset */ |
| /* PD5 */ { CONFIG_SYS_FCC3, 0, 0, 1, 0, 0 }, /* MII PHY Enable */ |
| /* PD4 */ { 0, 0, 0, 0, 0, 0 }, /* PD4 */ |
| /* PD3 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ |
| /* PD2 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ |
| /* PD1 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ |
| /* PD0 */ { 0, 0, 0, 0, 0, 0 } /* pin doesn't exist */ |
| } |
| }; |
| |
| #define PSPAN_ADDR 0xF0020000 |
| #define EEPROM_REG 0x408 |
| #define EEPROM_READ_CMD 0xA000 |
| #define PSPAN_WRITE(a,v) \ |
| *((volatile unsigned long *)(PSPAN_ADDR+(a))) = v; eieio() |
| #define PSPAN_READ(a) \ |
| *((volatile unsigned long *)(PSPAN_ADDR+(a))) |
| |
| static int seeprom_read (int addr, uchar * data, int size) |
| { |
| ulong val, cmd; |
| int i; |
| |
| for (i = 0; i < size; i++) { |
| |
| cmd = EEPROM_READ_CMD; |
| cmd |= ((addr + i) << 24) & 0xff000000; |
| |
| /* Wait for ACT to authorize write */ |
| while ((val = PSPAN_READ (EEPROM_REG)) & 0x80) |
| eieio (); |
| |
| /* Write command */ |
| PSPAN_WRITE (EEPROM_REG, cmd); |
| |
| /* Wait for data to be valid */ |
| while ((val = PSPAN_READ (EEPROM_REG)) & 0x80) |
| eieio (); |
| /* Do it twice, first read might be erratic */ |
| while ((val = PSPAN_READ (EEPROM_REG)) & 0x80) |
| eieio (); |
| |
| /* Read error */ |
| if (val & 0x00000040) { |
| return -1; |
| } else { |
| data[i] = (val >> 16) & 0xff; |
| } |
| } |
| return 0; |
| } |
| |
| /*************************************************************** |
| * We take some basic Hardware Configuration Parameter from the |
| * Serial EEPROM conected to the PSpan bridge. We keep it as |
| * simple as possible. |
| */ |
| #ifdef DEBUG |
| static int hwc_flash_size (void) |
| { |
| uchar byte; |
| |
| if (!seeprom_read (0x40, &byte, sizeof (byte))) { |
| switch ((byte >> 2) & 0x3) { |
| case 0x1: |
| return 0x0400000; |
| break; |
| case 0x2: |
| return 0x0800000; |
| break; |
| case 0x3: |
| return 0x1000000; |
| default: |
| return 0x0100000; |
| } |
| } |
| return -1; |
| } |
| |
| static int hwc_local_sdram_size (void) |
| { |
| uchar byte; |
| |
| if (!seeprom_read (0x40, &byte, sizeof (byte))) { |
| switch ((byte & 0x03)) { |
| case 0x1: |
| return 0x0800000; |
| case 0x2: |
| return 0x1000000; |
| default: |
| return 0; /* not present */ |
| } |
| } |
| return -1; |
| } |
| #endif /* DEBUG */ |
| |
| static int hwc_main_sdram_size (void) |
| { |
| uchar byte; |
| |
| if (!seeprom_read (0x41, &byte, sizeof (byte))) { |
| return 0x1000000 << ((byte >> 5) & 0x7); |
| } |
| return -1; |
| } |
| |
| static int hwc_serial_number (void) |
| { |
| int sn = -1; |
| |
| if (!seeprom_read (0xa0, (uchar *) &sn, sizeof (sn))) { |
| sn = cpu_to_le32 (sn); |
| } |
| return sn; |
| } |
| |
| static int hwc_mac_address (char *str) |
| { |
| char mac[6]; |
| |
| if (!seeprom_read (0xb0, (uchar *)mac, sizeof (mac))) { |
| sprintf (str, "%02X:%02X:%02X:%02X:%02X:%02X", |
| mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]); |
| } else { |
| strcpy (str, "ERROR"); |
| return -1; |
| } |
| return 0; |
| } |
| |
| static int hwc_manufact_date (char *str) |
| { |
| uchar byte; |
| int value; |
| |
| if (seeprom_read (0x92, &byte, sizeof (byte))) |
| goto out; |
| value = byte; |
| if (seeprom_read (0x93, &byte, sizeof (byte))) |
| goto out; |
| value += byte << 8; |
| sprintf (str, "%02d/%02d/%04d", |
| value & 0x1F, (value >> 5) & 0xF, |
| 1980 + ((value >> 9) & 0x1FF)); |
| return 0; |
| |
| out: |
| strcpy (str, "ERROR"); |
| return -1; |
| } |
| |
| static int hwc_board_type (char **str) |
| { |
| ushort id = 0; |
| |
| if (seeprom_read (7, (uchar *) & id, sizeof (id)) == 0) { |
| switch (id) { |
| case 0x9080: |
| *str = "4532-002"; |
| break; |
| case 0x9081: |
| *str = "4532-001"; |
| break; |
| case 0x9082: |
| *str = "4532-000"; |
| break; |
| default: |
| *str = "Unknown"; |
| } |
| } else { |
| *str = "Unknown"; |
| } |
| |
| return id; |
| } |
| |
| phys_size_t initdram (int board_type) |
| { |
| long maxsize = hwc_main_sdram_size(); |
| |
| #if !defined(CONFIG_SYS_RAMBOOT) && !defined(CONFIG_SYS_USE_FIRMWARE) |
| volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; |
| volatile memctl8260_t *memctl = &immap->im_memctl; |
| volatile uchar *base; |
| int i; |
| |
| immap->im_siu_conf.sc_ppc_acr = 0x00000026; |
| immap->im_siu_conf.sc_ppc_alrh = 0x01276345; |
| immap->im_siu_conf.sc_ppc_alrl = 0x89ABCDEF; |
| immap->im_siu_conf.sc_lcl_acr = 0x00000000; |
| immap->im_siu_conf.sc_lcl_alrh = 0x01234567; |
| immap->im_siu_conf.sc_lcl_alrl = 0x89ABCDEF; |
| immap->im_siu_conf.sc_tescr1 = 0x00004000; |
| immap->im_siu_conf.sc_ltescr1 = 0x00004000; |
| |
| memctl->memc_mptpr = CONFIG_SYS_MPTPR; |
| |
| /* Initialise 60x bus SDRAM */ |
| base = (uchar *)(CONFIG_SYS_SDRAM_BASE | 0x110); |
| memctl->memc_psrt = CONFIG_SYS_PSRT; |
| memctl->memc_or1 = CONFIG_SYS_60x_OR; |
| memctl->memc_br1 = CONFIG_SYS_SDRAM_BASE | CONFIG_SYS_60x_BR; |
| |
| memctl->memc_psdmr = CONFIG_SYS_PSDMR | 0x28000000; |
| *base = 0xFF; |
| memctl->memc_psdmr = CONFIG_SYS_PSDMR | 0x08000000; |
| for (i = 0; i < 8; i++) |
| *base = 0xFF; |
| memctl->memc_psdmr = CONFIG_SYS_PSDMR | 0x18000000; |
| *base = 0xFF; |
| memctl->memc_psdmr = CONFIG_SYS_PSDMR | 0x40000000; |
| |
| /* Initialise local bus SDRAM */ |
| base = (uchar *)CONFIG_SYS_LSDRAM_BASE; |
| memctl->memc_lsrt = CONFIG_SYS_LSRT; |
| memctl->memc_or2 = CONFIG_SYS_LOC_OR; |
| memctl->memc_br2 = CONFIG_SYS_LSDRAM_BASE | CONFIG_SYS_LOC_BR; |
| |
| memctl->memc_lsdmr = CONFIG_SYS_LSDMR | 0x28000000; |
| *base = 0xFF; |
| memctl->memc_lsdmr = CONFIG_SYS_LSDMR | 0x08000000; |
| for (i = 0; i < 8; i++) |
| *base = 0xFF; |
| memctl->memc_lsdmr = CONFIG_SYS_LSDMR | 0x18000000; |
| *base = 0xFF; |
| memctl->memc_lsdmr = CONFIG_SYS_LSDMR | 0x40000000; |
| |
| /* We must be able to test a location outsize the maximum legal size |
| * to find out THAT we are outside; but this address still has to be |
| * mapped by the controller. That means, that the initial mapping has |
| * to be (at least) twice as large as the maximum expected size. |
| */ |
| maxsize = (~(memctl->memc_or1 & BRx_BA_MSK) + 1) / 2; |
| |
| maxsize = get_ram_size((long *)(memctl->memc_br1 & BRx_BA_MSK), maxsize); |
| |
| memctl->memc_or1 |= ~(maxsize - 1); |
| |
| if (maxsize != hwc_main_sdram_size()) |
| puts("Oops: memory test has not found all memory!\n"); |
| #endif /* !CONFIG_SYS_RAMBOOT && !CONFIG_SYS_USE_FIRMWARE */ |
| |
| /* Return total RAM size (size of 60x SDRAM) */ |
| return maxsize; |
| } |
| |
| int checkboard(void) |
| { |
| char string[32], *id; |
| |
| hwc_manufact_date(string); |
| hwc_board_type(&id); |
| printf("Board: Interphase iSPAN %s (#%d %s)\n", |
| id, hwc_serial_number(), string); |
| #ifdef DEBUG |
| printf("Manufacturing date: %s\n", string); |
| printf("Serial number : %d\n", hwc_serial_number()); |
| printf("FLASH size : %d MB\n", hwc_flash_size() >> 20); |
| printf("Main SDRAM size : %d MB\n", hwc_main_sdram_size() >> 20); |
| printf("Local SDRAM size : %d MB\n", hwc_local_sdram_size() >> 20); |
| hwc_mac_address(string); |
| printf("MAC address : %s\n", string); |
| #endif |
| return 0; |
| } |
| |
| int misc_init_r(void) |
| { |
| char *s, str[32]; |
| int num; |
| |
| if ((s = getenv("serial#")) == NULL && |
| (num = hwc_serial_number()) != -1) { |
| sprintf(str, "%06d", num); |
| setenv("serial#", str); |
| } |
| if ((s = getenv("ethaddr")) == NULL && hwc_mac_address(str) == 0) { |
| setenv("ethaddr", str); |
| } |
| |
| return 0; |
| } |