imx: update i.MX8MQ device trees
This updates the i.MX8MQ device trees and, necessarily, also the
i.MX8MQ clock bindings. These are taken verbatim from from the
Linux kernel version v5.4-rc2, which three small changes which
were already part of the previous device tree:
* Keep the PSCI reserved memory range
* Keep the alias for ethernet, so that the MAC address can be set
* Keep the modified #include for the IOMUXC pins
Signed-off-by: Patrick Wildt <patrick@blueri.se>
Acked-by: Peng Fan <peng.fan@nxp.com>
diff --git a/arch/arm/dts/imx8mq.dtsi b/arch/arm/dts/imx8mq.dtsi
new file mode 100644
index 0000000..621e959
--- /dev/null
+++ b/arch/arm/dts/imx8mq.dtsi
@@ -0,0 +1,1111 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2017 NXP
+ * Copyright (C) 2017-2018 Pengutronix, Lucas Stach <kernel@pengutronix.de>
+ */
+
+#include <dt-bindings/clock/imx8mq-clock.h>
+#include <dt-bindings/pinctrl/pins-imx8mq.h>
+#include <dt-bindings/power/imx8mq-power.h>
+#include <dt-bindings/reset/imx8mq-reset.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "dt-bindings/input/input.h"
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+ interrupt-parent = <&gpc>;
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ aliases {
+ ethernet0 = &fec1;
+ gpio0 = &gpio1;
+ gpio1 = &gpio2;
+ gpio2 = &gpio3;
+ gpio3 = &gpio4;
+ gpio4 = &gpio5;
+ i2c0 = &i2c1;
+ i2c1 = &i2c2;
+ i2c2 = &i2c3;
+ i2c3 = &i2c4;
+ serial0 = &uart1;
+ serial1 = &uart2;
+ serial2 = &uart3;
+ serial3 = &uart4;
+ spi0 = &ecspi1;
+ spi1 = &ecspi2;
+ spi2 = &ecspi3;
+ };
+
+ ckil: clock-ckil {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ clock-output-names = "ckil";
+ };
+
+ osc_25m: clock-osc-25m {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <25000000>;
+ clock-output-names = "osc_25m";
+ };
+
+ osc_27m: clock-osc-27m {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <27000000>;
+ clock-output-names = "osc_27m";
+ };
+
+ clk_ext1: clock-ext1 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <133000000>;
+ clock-output-names = "clk_ext1";
+ };
+
+ clk_ext2: clock-ext2 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <133000000>;
+ clock-output-names = "clk_ext2";
+ };
+
+ clk_ext3: clock-ext3 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <133000000>;
+ clock-output-names = "clk_ext3";
+ };
+
+ clk_ext4: clock-ext4 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency= <133000000>;
+ clock-output-names = "clk_ext4";
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ A53_0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x0>;
+ clock-latency = <61036>; /* two CLK32 periods */
+ clocks = <&clk IMX8MQ_CLK_ARM>;
+ enable-method = "psci";
+ next-level-cache = <&A53_L2>;
+ operating-points-v2 = <&a53_opp_table>;
+ #cooling-cells = <2>;
+ nvmem-cells = <&cpu_speed_grade>;
+ nvmem-cell-names = "speed_grade";
+ };
+
+ A53_1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x1>;
+ clock-latency = <61036>; /* two CLK32 periods */
+ clocks = <&clk IMX8MQ_CLK_ARM>;
+ enable-method = "psci";
+ next-level-cache = <&A53_L2>;
+ operating-points-v2 = <&a53_opp_table>;
+ #cooling-cells = <2>;
+ };
+
+ A53_2: cpu@2 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x2>;
+ clock-latency = <61036>; /* two CLK32 periods */
+ clocks = <&clk IMX8MQ_CLK_ARM>;
+ enable-method = "psci";
+ next-level-cache = <&A53_L2>;
+ operating-points-v2 = <&a53_opp_table>;
+ #cooling-cells = <2>;
+ };
+
+ A53_3: cpu@3 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x3>;
+ clock-latency = <61036>; /* two CLK32 periods */
+ clocks = <&clk IMX8MQ_CLK_ARM>;
+ enable-method = "psci";
+ next-level-cache = <&A53_L2>;
+ operating-points-v2 = <&a53_opp_table>;
+ #cooling-cells = <2>;
+ };
+
+ A53_L2: l2-cache0 {
+ compatible = "cache";
+ };
+ };
+
+ a53_opp_table: opp-table {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp-800000000 {
+ opp-hz = /bits/ 64 <800000000>;
+ opp-microvolt = <900000>;
+ /* Industrial only */
+ opp-supported-hw = <0xf>, <0x4>;
+ clock-latency-ns = <150000>;
+ opp-suspend;
+ };
+
+ opp-1000000000 {
+ opp-hz = /bits/ 64 <1000000000>;
+ opp-microvolt = <900000>;
+ /* Consumer only */
+ opp-supported-hw = <0xe>, <0x3>;
+ clock-latency-ns = <150000>;
+ opp-suspend;
+ };
+
+ opp-1300000000 {
+ opp-hz = /bits/ 64 <1300000000>;
+ opp-microvolt = <1000000>;
+ opp-supported-hw = <0xc>, <0x4>;
+ clock-latency-ns = <150000>;
+ opp-suspend;
+ };
+
+ opp-1500000000 {
+ opp-hz = /bits/ 64 <1500000000>;
+ opp-microvolt = <1000000>;
+ opp-supported-hw = <0x8>, <0x3>;
+ clock-latency-ns = <150000>;
+ opp-suspend;
+ };
+ };
+
+ pmu {
+ compatible = "arm,cortex-a53-pmu";
+ interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&gic>;
+ interrupt-affinity = <&A53_0>, <&A53_1>, <&A53_2>, <&A53_3>;
+ };
+
+ psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
+ };
+
+ thermal-zones {
+ cpu-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <2000>;
+ thermal-sensors = <&tmu 0>;
+
+ trips {
+ cpu_alert: cpu-alert {
+ temperature = <80000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu-crit {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu_alert>;
+ cooling-device =
+ <&A53_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&A53_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&A53_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&A53_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ gpu-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <2000>;
+ thermal-sensors = <&tmu 1>;
+
+ trips {
+ gpu-crit {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ vpu-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <2000>;
+ thermal-sensors = <&tmu 2>;
+
+ trips {
+ vpu-crit {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* Physical Secure */
+ <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* Physical Non-Secure */
+ <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* Virtual */
+ <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* Hypervisor */
+ interrupt-parent = <&gic>;
+ arm,no-tick-in-suspend;
+ };
+
+ soc@0 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0x0 0x3e000000>;
+ dma-ranges = <0x40000000 0x0 0x40000000 0xc0000000>;
+
+ bus@30000000 { /* AIPS1 */
+ compatible = "fsl,imx8mq-aips-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x30000000 0x30000000 0x400000>;
+
+ gpio1: gpio@30200000 {
+ compatible = "fsl,imx8mq-gpio", "fsl,imx35-gpio";
+ reg = <0x30200000 0x10000>;
+ interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MQ_CLK_GPIO1_ROOT>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-ranges = <&iomuxc 0 10 30>;
+ };
+
+ gpio2: gpio@30210000 {
+ compatible = "fsl,imx8mq-gpio", "fsl,imx35-gpio";
+ reg = <0x30210000 0x10000>;
+ interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MQ_CLK_GPIO2_ROOT>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-ranges = <&iomuxc 0 40 21>;
+ };
+
+ gpio3: gpio@30220000 {
+ compatible = "fsl,imx8mq-gpio", "fsl,imx35-gpio";
+ reg = <0x30220000 0x10000>;
+ interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MQ_CLK_GPIO3_ROOT>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-ranges = <&iomuxc 0 61 26>;
+ };
+
+ gpio4: gpio@30230000 {
+ compatible = "fsl,imx8mq-gpio", "fsl,imx35-gpio";
+ reg = <0x30230000 0x10000>;
+ interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MQ_CLK_GPIO4_ROOT>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-ranges = <&iomuxc 0 87 32>;
+ };
+
+ gpio5: gpio@30240000 {
+ compatible = "fsl,imx8mq-gpio", "fsl,imx35-gpio";
+ reg = <0x30240000 0x10000>;
+ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MQ_CLK_GPIO5_ROOT>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-ranges = <&iomuxc 0 119 30>;
+ };
+
+ tmu: tmu@30260000 {
+ compatible = "fsl,imx8mq-tmu";
+ reg = <0x30260000 0x10000>;
+ interrupt = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MQ_CLK_TMU_ROOT>;
+ little-endian;
+ fsl,tmu-range = <0xb0000 0xa0026 0x80048 0x70061>;
+ fsl,tmu-calibration = <0x00000000 0x00000023
+ 0x00000001 0x00000029
+ 0x00000002 0x0000002f
+ 0x00000003 0x00000035
+ 0x00000004 0x0000003d
+ 0x00000005 0x00000043
+ 0x00000006 0x0000004b
+ 0x00000007 0x00000051
+ 0x00000008 0x00000057
+ 0x00000009 0x0000005f
+ 0x0000000a 0x00000067
+ 0x0000000b 0x0000006f
+
+ 0x00010000 0x0000001b
+ 0x00010001 0x00000023
+ 0x00010002 0x0000002b
+ 0x00010003 0x00000033
+ 0x00010004 0x0000003b
+ 0x00010005 0x00000043
+ 0x00010006 0x0000004b
+ 0x00010007 0x00000055
+ 0x00010008 0x0000005d
+ 0x00010009 0x00000067
+ 0x0001000a 0x00000070
+
+ 0x00020000 0x00000017
+ 0x00020001 0x00000023
+ 0x00020002 0x0000002d
+ 0x00020003 0x00000037
+ 0x00020004 0x00000041
+ 0x00020005 0x0000004b
+ 0x00020006 0x00000057
+ 0x00020007 0x00000063
+ 0x00020008 0x0000006f
+
+ 0x00030000 0x00000015
+ 0x00030001 0x00000021
+ 0x00030002 0x0000002d
+ 0x00030003 0x00000039
+ 0x00030004 0x00000045
+ 0x00030005 0x00000053
+ 0x00030006 0x0000005f
+ 0x00030007 0x00000071>;
+ #thermal-sensor-cells = <1>;
+ };
+
+ wdog1: watchdog@30280000 {
+ compatible = "fsl,imx8mq-wdt", "fsl,imx21-wdt";
+ reg = <0x30280000 0x10000>;
+ interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MQ_CLK_WDOG1_ROOT>;
+ status = "disabled";
+ };
+
+ wdog2: watchdog@30290000 {
+ compatible = "fsl,imx8mq-wdt", "fsl,imx21-wdt";
+ reg = <0x30290000 0x10000>;
+ interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MQ_CLK_WDOG2_ROOT>;
+ status = "disabled";
+ };
+
+ wdog3: watchdog@302a0000 {
+ compatible = "fsl,imx8mq-wdt", "fsl,imx21-wdt";
+ reg = <0x302a0000 0x10000>;
+ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MQ_CLK_WDOG3_ROOT>;
+ status = "disabled";
+ };
+
+ sdma2: sdma@302c0000 {
+ compatible = "fsl,imx8mq-sdma","fsl,imx7d-sdma";
+ reg = <0x302c0000 0x10000>;
+ interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MQ_CLK_SDMA2_ROOT>,
+ <&clk IMX8MQ_CLK_SDMA2_ROOT>;
+ clock-names = "ipg", "ahb";
+ #dma-cells = <3>;
+ fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
+ };
+
+ iomuxc: iomuxc@30330000 {
+ compatible = "fsl,imx8mq-iomuxc";
+ reg = <0x30330000 0x10000>;
+ };
+
+ iomuxc_gpr: syscon@30340000 {
+ compatible = "fsl,imx8mq-iomuxc-gpr", "fsl,imx6q-iomuxc-gpr",
+ "syscon", "simple-mfd";
+ reg = <0x30340000 0x10000>;
+
+ mux: mux-controller {
+ compatible = "mmio-mux";
+ #mux-control-cells = <1>;
+ mux-reg-masks = <0x34 0x00000004>; /* MIPI_MUX_SEL */
+ };
+ };
+
+ ocotp: ocotp-ctrl@30350000 {
+ compatible = "fsl,imx8mq-ocotp", "syscon";
+ reg = <0x30350000 0x10000>;
+ clocks = <&clk IMX8MQ_CLK_OCOTP_ROOT>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cpu_speed_grade: speed-grade@10 {
+ reg = <0x10 4>;
+ };
+ };
+
+ anatop: syscon@30360000 {
+ compatible = "fsl,imx8mq-anatop", "syscon";
+ reg = <0x30360000 0x10000>;
+ interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ snvs: snvs@30370000 {
+ compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
+ reg = <0x30370000 0x10000>;
+
+ snvs_rtc: snvs-rtc-lp{
+ compatible = "fsl,sec-v4.0-mon-rtc-lp";
+ regmap =<&snvs>;
+ offset = <0x34>;
+ interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MQ_CLK_SNVS_ROOT>;
+ clock-names = "snvs-rtc";
+ };
+
+ snvs_pwrkey: snvs-powerkey {
+ compatible = "fsl,sec-v4.0-pwrkey";
+ regmap = <&snvs>;
+ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+ linux,keycode = <KEY_POWER>;
+ wakeup-source;
+ status = "disabled";
+ };
+ };
+
+ clk: clock-controller@30380000 {
+ compatible = "fsl,imx8mq-ccm";
+ reg = <0x30380000 0x10000>;
+ interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+ #clock-cells = <1>;
+ clocks = <&ckil>, <&osc_25m>, <&osc_27m>,
+ <&clk_ext1>, <&clk_ext2>,
+ <&clk_ext3>, <&clk_ext4>;
+ clock-names = "ckil", "osc_25m", "osc_27m",
+ "clk_ext1", "clk_ext2",
+ "clk_ext3", "clk_ext4";
+ };
+
+ src: reset-controller@30390000 {
+ compatible = "fsl,imx8mq-src", "syscon";
+ reg = <0x30390000 0x10000>;
+ #reset-cells = <1>;
+ };
+
+ gpc: gpc@303a0000 {
+ compatible = "fsl,imx8mq-gpc";
+ reg = <0x303a0000 0x10000>;
+ interrupt-parent = <&gic>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+
+ pgc {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pgc_mipi: power-domain@0 {
+ #power-domain-cells = <0>;
+ reg = <IMX8M_POWER_DOMAIN_MIPI>;
+ };
+
+ /*
+ * As per comment in ATF source code:
+ *
+ * PCIE1 and PCIE2 share the
+ * same reset signal, if we
+ * power down PCIE2, PCIE1
+ * will be held in reset too.
+ *
+ * So instead of creating two
+ * separate power domains for
+ * PCIE1 and PCIE2 we create a
+ * link between both and use
+ * it as a shared PCIE power
+ * domain.
+ */
+ pgc_pcie: power-domain@1 {
+ #power-domain-cells = <0>;
+ reg = <IMX8M_POWER_DOMAIN_PCIE1>;
+ power-domains = <&pgc_pcie2>;
+ };
+
+ pgc_otg1: power-domain@2 {
+ #power-domain-cells = <0>;
+ reg = <IMX8M_POWER_DOMAIN_USB_OTG1>;
+ };
+
+ pgc_otg2: power-domain@3 {
+ #power-domain-cells = <0>;
+ reg = <IMX8M_POWER_DOMAIN_USB_OTG2>;
+ };
+
+ pgc_ddr1: power-domain@4 {
+ #power-domain-cells = <0>;
+ reg = <IMX8M_POWER_DOMAIN_DDR1>;
+ };
+
+ pgc_gpu: power-domain@5 {
+ #power-domain-cells = <0>;
+ reg = <IMX8M_POWER_DOMAIN_GPU>;
+ clocks = <&clk IMX8MQ_CLK_GPU_ROOT>,
+ <&clk IMX8MQ_CLK_GPU_SHADER_DIV>,
+ <&clk IMX8MQ_CLK_GPU_AXI>,
+ <&clk IMX8MQ_CLK_GPU_AHB>;
+ };
+
+ pgc_vpu: power-domain@6 {
+ #power-domain-cells = <0>;
+ reg = <IMX8M_POWER_DOMAIN_VPU>;
+ };
+
+ pgc_disp: power-domain@7 {
+ #power-domain-cells = <0>;
+ reg = <IMX8M_POWER_DOMAIN_DISP>;
+ };
+
+ pgc_mipi_csi1: power-domain@8 {
+ #power-domain-cells = <0>;
+ reg = <IMX8M_POWER_DOMAIN_MIPI_CSI1>;
+ };
+
+ pgc_mipi_csi2: power-domain@9 {
+ #power-domain-cells = <0>;
+ reg = <IMX8M_POWER_DOMAIN_MIPI_CSI2>;
+ };
+
+ pgc_pcie2: power-domain@a {
+ #power-domain-cells = <0>;
+ reg = <IMX8M_POWER_DOMAIN_PCIE2>;
+ };
+ };
+ };
+ };
+
+ bus@30400000 { /* AIPS2 */
+ compatible = "fsl,imx8mq-aips-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x30400000 0x30400000 0x400000>;
+
+ pwm1: pwm@30660000 {
+ compatible = "fsl,imx8mq-pwm", "fsl,imx27-pwm";
+ reg = <0x30660000 0x10000>;
+ interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MQ_CLK_PWM1_ROOT>,
+ <&clk IMX8MQ_CLK_PWM1_ROOT>;
+ clock-names = "ipg", "per";
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ pwm2: pwm@30670000 {
+ compatible = "fsl,imx8mq-pwm", "fsl,imx27-pwm";
+ reg = <0x30670000 0x10000>;
+ interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MQ_CLK_PWM2_ROOT>,
+ <&clk IMX8MQ_CLK_PWM2_ROOT>;
+ clock-names = "ipg", "per";
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ pwm3: pwm@30680000 {
+ compatible = "fsl,imx8mq-pwm", "fsl,imx27-pwm";
+ reg = <0x30680000 0x10000>;
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MQ_CLK_PWM3_ROOT>,
+ <&clk IMX8MQ_CLK_PWM3_ROOT>;
+ clock-names = "ipg", "per";
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ pwm4: pwm@30690000 {
+ compatible = "fsl,imx8mq-pwm", "fsl,imx27-pwm";
+ reg = <0x30690000 0x10000>;
+ interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MQ_CLK_PWM4_ROOT>,
+ <&clk IMX8MQ_CLK_PWM4_ROOT>;
+ clock-names = "ipg", "per";
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ system_counter: timer@306a0000 {
+ compatible = "nxp,sysctr-timer";
+ reg = <0x306a0000 0x20000>;
+ interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&osc_25m>;
+ clock-names = "per";
+ };
+ };
+
+ bus@30800000 { /* AIPS3 */
+ compatible = "fsl,imx8mq-aips-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x30800000 0x30800000 0x400000>,
+ <0x08000000 0x08000000 0x10000000>;
+
+ ecspi1: spi@30820000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx8mq-ecspi", "fsl,imx51-ecspi";
+ reg = <0x30820000 0x10000>;
+ interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MQ_CLK_ECSPI1_ROOT>,
+ <&clk IMX8MQ_CLK_ECSPI1_ROOT>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ ecspi2: spi@30830000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx8mq-ecspi", "fsl,imx51-ecspi";
+ reg = <0x30830000 0x10000>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MQ_CLK_ECSPI2_ROOT>,
+ <&clk IMX8MQ_CLK_ECSPI2_ROOT>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ ecspi3: spi@30840000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx8mq-ecspi", "fsl,imx51-ecspi";
+ reg = <0x30840000 0x10000>;
+ interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MQ_CLK_ECSPI3_ROOT>,
+ <&clk IMX8MQ_CLK_ECSPI3_ROOT>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ uart1: serial@30860000 {
+ compatible = "fsl,imx8mq-uart",
+ "fsl,imx6q-uart";
+ reg = <0x30860000 0x10000>;
+ interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MQ_CLK_UART1_ROOT>,
+ <&clk IMX8MQ_CLK_UART1_ROOT>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ uart3: serial@30880000 {
+ compatible = "fsl,imx8mq-uart",
+ "fsl,imx6q-uart";
+ reg = <0x30880000 0x10000>;
+ interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MQ_CLK_UART3_ROOT>,
+ <&clk IMX8MQ_CLK_UART3_ROOT>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ uart2: serial@30890000 {
+ compatible = "fsl,imx8mq-uart",
+ "fsl,imx6q-uart";
+ reg = <0x30890000 0x10000>;
+ interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MQ_CLK_UART2_ROOT>,
+ <&clk IMX8MQ_CLK_UART2_ROOT>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ sai2: sai@308b0000 {
+ #sound-dai-cells = <0>;
+ compatible = "fsl,imx8mq-sai";
+ reg = <0x308b0000 0x10000>;
+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MQ_CLK_SAI2_IPG>,
+ <&clk IMX8MQ_CLK_SAI2_ROOT>,
+ <&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_CLK_DUMMY>;
+ clock-names = "bus", "mclk1", "mclk2", "mclk3";
+ dmas = <&sdma1 10 24 0>, <&sdma1 11 24 0>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ crypto: crypto@30900000 {
+ compatible = "fsl,sec-v4.0";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x30900000 0x40000>;
+ ranges = <0 0x30900000 0x40000>;
+ interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MQ_CLK_AHB>,
+ <&clk IMX8MQ_CLK_IPG_ROOT>;
+ clock-names = "aclk", "ipg";
+
+ sec_jr0: jr@1000 {
+ compatible = "fsl,sec-v4.0-job-ring";
+ reg = <0x1000 0x1000>;
+ interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ sec_jr1: jr@2000 {
+ compatible = "fsl,sec-v4.0-job-ring";
+ reg = <0x2000 0x1000>;
+ interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ sec_jr2: jr@3000 {
+ compatible = "fsl,sec-v4.0-job-ring";
+ reg = <0x3000 0x1000>;
+ interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ dphy: dphy@30a00300 {
+ compatible = "fsl,imx8mq-mipi-dphy";
+ reg = <0x30a00300 0x100>;
+ clocks = <&clk IMX8MQ_CLK_DSI_PHY_REF>;
+ clock-names = "phy_ref";
+ assigned-clocks = <&clk IMX8MQ_CLK_DSI_PHY_REF>;
+ assigned-clock-parents = <&clk IMX8MQ_VIDEO_PLL1_OUT>;
+ assigned-clock-rates = <24000000>;
+ #phy-cells = <0>;
+ power-domains = <&pgc_mipi>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@30a20000 {
+ compatible = "fsl,imx8mq-i2c", "fsl,imx21-i2c";
+ reg = <0x30a20000 0x10000>;
+ interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MQ_CLK_I2C1_ROOT>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@30a30000 {
+ compatible = "fsl,imx8mq-i2c", "fsl,imx21-i2c";
+ reg = <0x30a30000 0x10000>;
+ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MQ_CLK_I2C2_ROOT>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@30a40000 {
+ compatible = "fsl,imx8mq-i2c", "fsl,imx21-i2c";
+ reg = <0x30a40000 0x10000>;
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MQ_CLK_I2C3_ROOT>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c4: i2c@30a50000 {
+ compatible = "fsl,imx8mq-i2c", "fsl,imx21-i2c";
+ reg = <0x30a50000 0x10000>;
+ interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MQ_CLK_I2C4_ROOT>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ uart4: serial@30a60000 {
+ compatible = "fsl,imx8mq-uart",
+ "fsl,imx6q-uart";
+ reg = <0x30a60000 0x10000>;
+ interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MQ_CLK_UART4_ROOT>,
+ <&clk IMX8MQ_CLK_UART4_ROOT>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ usdhc1: mmc@30b40000 {
+ compatible = "fsl,imx8mq-usdhc",
+ "fsl,imx7d-usdhc";
+ reg = <0x30b40000 0x10000>;
+ interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MQ_CLK_DUMMY>,
+ <&clk IMX8MQ_CLK_NAND_USDHC_BUS>,
+ <&clk IMX8MQ_CLK_USDHC1_ROOT>;
+ clock-names = "ipg", "ahb", "per";
+ assigned-clocks = <&clk IMX8MQ_CLK_USDHC1>;
+ assigned-clock-rates = <400000000>;
+ fsl,tuning-start-tap = <20>;
+ fsl,tuning-step = <2>;
+ bus-width = <4>;
+ status = "disabled";
+ };
+
+ usdhc2: mmc@30b50000 {
+ compatible = "fsl,imx8mq-usdhc",
+ "fsl,imx7d-usdhc";
+ reg = <0x30b50000 0x10000>;
+ interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MQ_CLK_DUMMY>,
+ <&clk IMX8MQ_CLK_NAND_USDHC_BUS>,
+ <&clk IMX8MQ_CLK_USDHC2_ROOT>;
+ clock-names = "ipg", "ahb", "per";
+ fsl,tuning-start-tap = <20>;
+ fsl,tuning-step = <2>;
+ bus-width = <4>;
+ status = "disabled";
+ };
+
+ qspi0: spi@30bb0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx8mq-qspi", "fsl,imx7d-qspi";
+ reg = <0x30bb0000 0x10000>,
+ <0x08000000 0x10000000>;
+ reg-names = "QuadSPI", "QuadSPI-memory";
+ interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MQ_CLK_QSPI_ROOT>,
+ <&clk IMX8MQ_CLK_QSPI_ROOT>;
+ clock-names = "qspi_en", "qspi";
+ status = "disabled";
+ };
+
+ sdma1: sdma@30bd0000 {
+ compatible = "fsl,imx8mq-sdma","fsl,imx7d-sdma";
+ reg = <0x30bd0000 0x10000>;
+ interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MQ_CLK_SDMA1_ROOT>,
+ <&clk IMX8MQ_CLK_AHB>;
+ clock-names = "ipg", "ahb";
+ #dma-cells = <3>;
+ fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
+ };
+
+ fec1: ethernet@30be0000 {
+ compatible = "fsl,imx8mq-fec", "fsl,imx6sx-fec";
+ reg = <0x30be0000 0x10000>;
+ interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MQ_CLK_ENET1_ROOT>,
+ <&clk IMX8MQ_CLK_ENET1_ROOT>,
+ <&clk IMX8MQ_CLK_ENET_TIMER>,
+ <&clk IMX8MQ_CLK_ENET_REF>,
+ <&clk IMX8MQ_CLK_ENET_PHY_REF>;
+ clock-names = "ipg", "ahb", "ptp",
+ "enet_clk_ref", "enet_out";
+ fsl,num-tx-queues = <3>;
+ fsl,num-rx-queues = <3>;
+ status = "disabled";
+ };
+ };
+
+ bus@32c00000 { /* AIPS4 */
+ compatible = "fsl,imx8mq-aips-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x32c00000 0x32c00000 0x400000>;
+
+ irqsteer: interrupt-controller@32e2d000 {
+ compatible = "fsl,imx8m-irqsteer", "fsl,imx-irqsteer";
+ reg = <0x32e2d000 0x1000>;
+ interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MQ_CLK_DISP_APB_ROOT>;
+ clock-names = "ipg";
+ fsl,channel = <0>;
+ fsl,num-irqs = <64>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+ };
+
+ gpu: gpu@38000000 {
+ compatible = "vivante,gc";
+ reg = <0x38000000 0x40000>;
+ interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MQ_CLK_GPU_ROOT>,
+ <&clk IMX8MQ_CLK_GPU_SHADER_DIV>,
+ <&clk IMX8MQ_CLK_GPU_AXI>,
+ <&clk IMX8MQ_CLK_GPU_AHB>;
+ clock-names = "core", "shader", "bus", "reg";
+ assigned-clocks = <&clk IMX8MQ_CLK_GPU_CORE_SRC>,
+ <&clk IMX8MQ_CLK_GPU_SHADER_SRC>,
+ <&clk IMX8MQ_CLK_GPU_AXI>,
+ <&clk IMX8MQ_CLK_GPU_AHB>,
+ <&clk IMX8MQ_GPU_PLL_BYPASS>;
+ assigned-clock-parents = <&clk IMX8MQ_GPU_PLL_OUT>,
+ <&clk IMX8MQ_GPU_PLL_OUT>,
+ <&clk IMX8MQ_GPU_PLL_OUT>,
+ <&clk IMX8MQ_GPU_PLL_OUT>,
+ <&clk IMX8MQ_GPU_PLL>;
+ assigned-clock-rates = <800000000>, <800000000>,
+ <800000000>, <800000000>, <0>;
+ power-domains = <&pgc_gpu>;
+ };
+
+ usb_dwc3_0: usb@38100000 {
+ compatible = "fsl,imx8mq-dwc3", "snps,dwc3";
+ reg = <0x38100000 0x10000>;
+ clocks = <&clk IMX8MQ_CLK_USB1_CTRL_ROOT>,
+ <&clk IMX8MQ_CLK_USB_CORE_REF>,
+ <&clk IMX8MQ_CLK_32K>;
+ clock-names = "bus_early", "ref", "suspend";
+ assigned-clocks = <&clk IMX8MQ_CLK_USB_BUS>,
+ <&clk IMX8MQ_CLK_USB_CORE_REF>;
+ assigned-clock-parents = <&clk IMX8MQ_SYS2_PLL_500M>,
+ <&clk IMX8MQ_SYS1_PLL_100M>;
+ assigned-clock-rates = <500000000>, <100000000>;
+ interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&usb3_phy0>, <&usb3_phy0>;
+ phy-names = "usb2-phy", "usb3-phy";
+ power-domains = <&pgc_otg1>;
+ usb3-resume-missing-cas;
+ status = "disabled";
+ };
+
+ usb3_phy0: usb-phy@381f0040 {
+ compatible = "fsl,imx8mq-usb-phy";
+ reg = <0x381f0040 0x40>;
+ clocks = <&clk IMX8MQ_CLK_USB1_PHY_ROOT>;
+ clock-names = "phy";
+ assigned-clocks = <&clk IMX8MQ_CLK_USB_PHY_REF>;
+ assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_100M>;
+ assigned-clock-rates = <100000000>;
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+
+ usb_dwc3_1: usb@38200000 {
+ compatible = "fsl,imx8mq-dwc3", "snps,dwc3";
+ reg = <0x38200000 0x10000>;
+ clocks = <&clk IMX8MQ_CLK_USB2_CTRL_ROOT>,
+ <&clk IMX8MQ_CLK_USB_CORE_REF>,
+ <&clk IMX8MQ_CLK_32K>;
+ clock-names = "bus_early", "ref", "suspend";
+ assigned-clocks = <&clk IMX8MQ_CLK_USB_BUS>,
+ <&clk IMX8MQ_CLK_USB_CORE_REF>;
+ assigned-clock-parents = <&clk IMX8MQ_SYS2_PLL_500M>,
+ <&clk IMX8MQ_SYS1_PLL_100M>;
+ assigned-clock-rates = <500000000>, <100000000>;
+ interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&usb3_phy1>, <&usb3_phy1>;
+ phy-names = "usb2-phy", "usb3-phy";
+ power-domains = <&pgc_otg2>;
+ usb3-resume-missing-cas;
+ status = "disabled";
+ };
+
+ usb3_phy1: usb-phy@382f0040 {
+ compatible = "fsl,imx8mq-usb-phy";
+ reg = <0x382f0040 0x40>;
+ clocks = <&clk IMX8MQ_CLK_USB2_PHY_ROOT>;
+ clock-names = "phy";
+ assigned-clocks = <&clk IMX8MQ_CLK_USB_PHY_REF>;
+ assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_100M>;
+ assigned-clock-rates = <100000000>;
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+
+ pcie0: pcie@33800000 {
+ compatible = "fsl,imx8mq-pcie";
+ reg = <0x33800000 0x400000>,
+ <0x1ff00000 0x80000>;
+ reg-names = "dbi", "config";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ bus-range = <0x00 0xff>;
+ ranges = <0x81000000 0 0x00000000 0x1ff80000 0 0x00010000 /* downstream I/O 64KB */
+ 0x82000000 0 0x18000000 0x18000000 0 0x07f00000>; /* non-prefetchable memory */
+ num-lanes = <1>;
+ num-viewport = <4>;
+ interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "msi";
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ interrupt-map = <0 0 0 1 &gic GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 2 &gic GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 3 &gic GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 4 &gic GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+ fsl,max-link-speed = <2>;
+ power-domains = <&pgc_pcie>;
+ resets = <&src IMX8MQ_RESET_PCIEPHY>,
+ <&src IMX8MQ_RESET_PCIE_CTRL_APPS_EN>,
+ <&src IMX8MQ_RESET_PCIE_CTRL_APPS_TURNOFF>;
+ reset-names = "pciephy", "apps", "turnoff";
+ status = "disabled";
+ };
+
+ pcie1: pcie@33c00000 {
+ compatible = "fsl,imx8mq-pcie";
+ reg = <0x33c00000 0x400000>,
+ <0x27f00000 0x80000>;
+ reg-names = "dbi", "config";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ ranges = <0x81000000 0 0x00000000 0x27f80000 0 0x00010000 /* downstream I/O 64KB */
+ 0x82000000 0 0x20000000 0x20000000 0 0x07f00000>; /* non-prefetchable memory */
+ num-lanes = <1>;
+ num-viewport = <4>;
+ interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "msi";
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ interrupt-map = <0 0 0 1 &gic GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 2 &gic GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 3 &gic GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 4 &gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+ fsl,max-link-speed = <2>;
+ power-domains = <&pgc_pcie>;
+ resets = <&src IMX8MQ_RESET_PCIEPHY2>,
+ <&src IMX8MQ_RESET_PCIE2_CTRL_APPS_EN>,
+ <&src IMX8MQ_RESET_PCIE2_CTRL_APPS_TURNOFF>;
+ reset-names = "pciephy", "apps", "turnoff";
+ status = "disabled";
+ };
+
+ gic: interrupt-controller@38800000 {
+ compatible = "arm,gic-v3";
+ reg = <0x38800000 0x10000>, /* GIC Dist */
+ <0x38880000 0xc0000>, /* GICR */
+ <0x31000000 0x2000>, /* GICC */
+ <0x31010000 0x2000>, /* GICV */
+ <0x31020000 0x2000>; /* GICH */
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&gic>;
+ };
+
+ ddr-pmu@3d800000 {
+ compatible = "fsl,imx8mq-ddr-pmu", "fsl,imx8m-ddr-pmu";
+ reg = <0x3d800000 0x400000>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+};