diff --git a/arch/arm/dts/imx8mq.dtsi b/arch/arm/dts/imx8mq.dtsi
new file mode 100644
index 0000000..621e959
--- /dev/null
+++ b/arch/arm/dts/imx8mq.dtsi
@@ -0,0 +1,1111 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2017 NXP
+ * Copyright (C) 2017-2018 Pengutronix, Lucas Stach <kernel@pengutronix.de>
+ */
+
+#include <dt-bindings/clock/imx8mq-clock.h>
+#include <dt-bindings/pinctrl/pins-imx8mq.h>
+#include <dt-bindings/power/imx8mq-power.h>
+#include <dt-bindings/reset/imx8mq-reset.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "dt-bindings/input/input.h"
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	interrupt-parent = <&gpc>;
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		ethernet0 = &fec1;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		gpio4 = &gpio5;
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		i2c2 = &i2c3;
+		i2c3 = &i2c4;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		spi0 = &ecspi1;
+		spi1 = &ecspi2;
+		spi2 = &ecspi3;
+	};
+
+	ckil: clock-ckil {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "ckil";
+	};
+
+	osc_25m: clock-osc-25m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+		clock-output-names = "osc_25m";
+	};
+
+	osc_27m: clock-osc-27m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <27000000>;
+		clock-output-names = "osc_27m";
+	};
+
+	clk_ext1: clock-ext1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <133000000>;
+		clock-output-names = "clk_ext1";
+	};
+
+	clk_ext2: clock-ext2 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <133000000>;
+		clock-output-names = "clk_ext2";
+	};
+
+	clk_ext3: clock-ext3 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <133000000>;
+		clock-output-names = "clk_ext3";
+	};
+
+	clk_ext4: clock-ext4 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency= <133000000>;
+		clock-output-names = "clk_ext4";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		A53_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0>;
+			clock-latency = <61036>; /* two CLK32 periods */
+			clocks = <&clk IMX8MQ_CLK_ARM>;
+			enable-method = "psci";
+			next-level-cache = <&A53_L2>;
+			operating-points-v2 = <&a53_opp_table>;
+			#cooling-cells = <2>;
+			nvmem-cells = <&cpu_speed_grade>;
+			nvmem-cell-names = "speed_grade";
+		};
+
+		A53_1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x1>;
+			clock-latency = <61036>; /* two CLK32 periods */
+			clocks = <&clk IMX8MQ_CLK_ARM>;
+			enable-method = "psci";
+			next-level-cache = <&A53_L2>;
+			operating-points-v2 = <&a53_opp_table>;
+			#cooling-cells = <2>;
+		};
+
+		A53_2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x2>;
+			clock-latency = <61036>; /* two CLK32 periods */
+			clocks = <&clk IMX8MQ_CLK_ARM>;
+			enable-method = "psci";
+			next-level-cache = <&A53_L2>;
+			operating-points-v2 = <&a53_opp_table>;
+			#cooling-cells = <2>;
+		};
+
+		A53_3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x3>;
+			clock-latency = <61036>; /* two CLK32 periods */
+			clocks = <&clk IMX8MQ_CLK_ARM>;
+			enable-method = "psci";
+			next-level-cache = <&A53_L2>;
+			operating-points-v2 = <&a53_opp_table>;
+			#cooling-cells = <2>;
+		};
+
+		A53_L2: l2-cache0 {
+			compatible = "cache";
+		};
+	};
+
+	a53_opp_table: opp-table {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+			opp-microvolt = <900000>;
+			/* Industrial only */
+			opp-supported-hw = <0xf>, <0x4>;
+			clock-latency-ns = <150000>;
+			opp-suspend;
+		};
+
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <900000>;
+			/* Consumer only */
+			opp-supported-hw = <0xe>, <0x3>;
+			clock-latency-ns = <150000>;
+			opp-suspend;
+		};
+
+		opp-1300000000 {
+			opp-hz = /bits/ 64 <1300000000>;
+			opp-microvolt = <1000000>;
+			opp-supported-hw = <0xc>, <0x4>;
+			clock-latency-ns = <150000>;
+			opp-suspend;
+		};
+
+		opp-1500000000 {
+			opp-hz = /bits/ 64 <1500000000>;
+			opp-microvolt = <1000000>;
+			opp-supported-hw = <0x8>, <0x3>;
+			clock-latency-ns = <150000>;
+			opp-suspend;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&gic>;
+		interrupt-affinity = <&A53_0>, <&A53_1>, <&A53_2>, <&A53_3>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	thermal-zones {
+		cpu-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <2000>;
+			thermal-sensors = <&tmu 0>;
+
+			trips {
+				cpu_alert: cpu-alert {
+					temperature = <80000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu-crit {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert>;
+					cooling-device =
+						<&A53_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A53_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A53_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A53_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		gpu-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <2000>;
+			thermal-sensors = <&tmu 1>;
+
+			trips {
+				gpu-crit {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		vpu-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <2000>;
+			thermal-sensors = <&tmu 2>;
+
+			trips {
+				vpu-crit {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* Physical Secure */
+		             <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* Physical Non-Secure */
+		             <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* Virtual */
+		             <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* Hypervisor */
+		interrupt-parent = <&gic>;
+		arm,no-tick-in-suspend;
+	};
+
+	soc@0 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x0 0x3e000000>;
+		dma-ranges = <0x40000000 0x0 0x40000000 0xc0000000>;
+
+		bus@30000000 { /* AIPS1 */
+			compatible = "fsl,imx8mq-aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x30000000 0x30000000 0x400000>;
+
+			gpio1: gpio@30200000 {
+				compatible = "fsl,imx8mq-gpio", "fsl,imx35-gpio";
+				reg = <0x30200000 0x10000>;
+				interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
+				             <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_GPIO1_ROOT>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 10 30>;
+			};
+
+			gpio2: gpio@30210000 {
+				compatible = "fsl,imx8mq-gpio", "fsl,imx35-gpio";
+				reg = <0x30210000 0x10000>;
+				interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
+				             <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_GPIO2_ROOT>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 40 21>;
+			};
+
+			gpio3: gpio@30220000 {
+				compatible = "fsl,imx8mq-gpio", "fsl,imx35-gpio";
+				reg = <0x30220000 0x10000>;
+				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+				             <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_GPIO3_ROOT>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 61 26>;
+			};
+
+			gpio4: gpio@30230000 {
+				compatible = "fsl,imx8mq-gpio", "fsl,imx35-gpio";
+				reg = <0x30230000 0x10000>;
+				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+				             <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_GPIO4_ROOT>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 87 32>;
+			};
+
+			gpio5: gpio@30240000 {
+				compatible = "fsl,imx8mq-gpio", "fsl,imx35-gpio";
+				reg = <0x30240000 0x10000>;
+				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+				             <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_GPIO5_ROOT>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 119 30>;
+			};
+
+			tmu: tmu@30260000 {
+				compatible = "fsl,imx8mq-tmu";
+				reg = <0x30260000 0x10000>;
+				interrupt = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_TMU_ROOT>;
+				little-endian;
+				fsl,tmu-range = <0xb0000 0xa0026 0x80048 0x70061>;
+				fsl,tmu-calibration = <0x00000000 0x00000023
+						       0x00000001 0x00000029
+						       0x00000002 0x0000002f
+						       0x00000003 0x00000035
+						       0x00000004 0x0000003d
+						       0x00000005 0x00000043
+						       0x00000006 0x0000004b
+						       0x00000007 0x00000051
+						       0x00000008 0x00000057
+						       0x00000009 0x0000005f
+						       0x0000000a 0x00000067
+						       0x0000000b 0x0000006f
+
+						       0x00010000 0x0000001b
+						       0x00010001 0x00000023
+						       0x00010002 0x0000002b
+						       0x00010003 0x00000033
+						       0x00010004 0x0000003b
+						       0x00010005 0x00000043
+						       0x00010006 0x0000004b
+						       0x00010007 0x00000055
+						       0x00010008 0x0000005d
+						       0x00010009 0x00000067
+						       0x0001000a 0x00000070
+
+						       0x00020000 0x00000017
+						       0x00020001 0x00000023
+						       0x00020002 0x0000002d
+						       0x00020003 0x00000037
+						       0x00020004 0x00000041
+						       0x00020005 0x0000004b
+						       0x00020006 0x00000057
+						       0x00020007 0x00000063
+						       0x00020008 0x0000006f
+
+						       0x00030000 0x00000015
+						       0x00030001 0x00000021
+						       0x00030002 0x0000002d
+						       0x00030003 0x00000039
+						       0x00030004 0x00000045
+						       0x00030005 0x00000053
+						       0x00030006 0x0000005f
+						       0x00030007 0x00000071>;
+				#thermal-sensor-cells =  <1>;
+			};
+
+			wdog1: watchdog@30280000 {
+				compatible = "fsl,imx8mq-wdt", "fsl,imx21-wdt";
+				reg = <0x30280000 0x10000>;
+				interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_WDOG1_ROOT>;
+				status = "disabled";
+			};
+
+			wdog2: watchdog@30290000 {
+				compatible = "fsl,imx8mq-wdt", "fsl,imx21-wdt";
+				reg = <0x30290000 0x10000>;
+				interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_WDOG2_ROOT>;
+				status = "disabled";
+			};
+
+			wdog3: watchdog@302a0000 {
+				compatible = "fsl,imx8mq-wdt", "fsl,imx21-wdt";
+				reg = <0x302a0000 0x10000>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_WDOG3_ROOT>;
+				status = "disabled";
+			};
+
+			sdma2: sdma@302c0000 {
+				compatible = "fsl,imx8mq-sdma","fsl,imx7d-sdma";
+				reg = <0x302c0000 0x10000>;
+				interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_SDMA2_ROOT>,
+					 <&clk IMX8MQ_CLK_SDMA2_ROOT>;
+				clock-names = "ipg", "ahb";
+				#dma-cells = <3>;
+				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
+			};
+
+			iomuxc: iomuxc@30330000 {
+				compatible = "fsl,imx8mq-iomuxc";
+				reg = <0x30330000 0x10000>;
+			};
+
+			iomuxc_gpr: syscon@30340000 {
+				compatible = "fsl,imx8mq-iomuxc-gpr", "fsl,imx6q-iomuxc-gpr",
+					     "syscon", "simple-mfd";
+				reg = <0x30340000 0x10000>;
+
+				mux: mux-controller {
+					compatible = "mmio-mux";
+					#mux-control-cells = <1>;
+					mux-reg-masks = <0x34 0x00000004>; /* MIPI_MUX_SEL */
+				};
+			};
+
+			ocotp: ocotp-ctrl@30350000 {
+				compatible = "fsl,imx8mq-ocotp", "syscon";
+				reg = <0x30350000 0x10000>;
+				clocks = <&clk IMX8MQ_CLK_OCOTP_ROOT>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				cpu_speed_grade: speed-grade@10 {
+					reg = <0x10 4>;
+				};
+			};
+
+			anatop: syscon@30360000 {
+				compatible = "fsl,imx8mq-anatop", "syscon";
+				reg = <0x30360000 0x10000>;
+				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			snvs: snvs@30370000 {
+				compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
+				reg = <0x30370000 0x10000>;
+
+				snvs_rtc: snvs-rtc-lp{
+					compatible = "fsl,sec-v4.0-mon-rtc-lp";
+					regmap =<&snvs>;
+					offset = <0x34>;
+					interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+						<GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MQ_CLK_SNVS_ROOT>;
+					clock-names = "snvs-rtc";
+				};
+
+				snvs_pwrkey: snvs-powerkey {
+					compatible = "fsl,sec-v4.0-pwrkey";
+					regmap = <&snvs>;
+					interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+					linux,keycode = <KEY_POWER>;
+					wakeup-source;
+					status = "disabled";
+				};
+			};
+
+			clk: clock-controller@30380000 {
+				compatible = "fsl,imx8mq-ccm";
+				reg = <0x30380000 0x10000>;
+				interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+				             <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+				#clock-cells = <1>;
+				clocks = <&ckil>, <&osc_25m>, <&osc_27m>,
+				         <&clk_ext1>, <&clk_ext2>,
+				         <&clk_ext3>, <&clk_ext4>;
+				clock-names = "ckil", "osc_25m", "osc_27m",
+				              "clk_ext1", "clk_ext2",
+				              "clk_ext3", "clk_ext4";
+			};
+
+			src: reset-controller@30390000 {
+				compatible = "fsl,imx8mq-src", "syscon";
+				reg = <0x30390000 0x10000>;
+				#reset-cells = <1>;
+			};
+
+			gpc: gpc@303a0000 {
+				compatible = "fsl,imx8mq-gpc";
+				reg = <0x303a0000 0x10000>;
+				interrupt-parent = <&gic>;
+				interrupt-controller;
+				#interrupt-cells = <3>;
+
+				pgc {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					pgc_mipi: power-domain@0 {
+						#power-domain-cells = <0>;
+						reg = <IMX8M_POWER_DOMAIN_MIPI>;
+					};
+
+					/*
+					 * As per comment in ATF source code:
+					 *
+					 * PCIE1 and PCIE2 share the
+					 * same reset signal, if we
+					 * power down PCIE2, PCIE1
+					 * will be held in reset too.
+					 *
+					 * So instead of creating two
+					 * separate power domains for
+					 * PCIE1 and PCIE2 we create a
+					 * link between both and use
+					 * it as a shared PCIE power
+					 * domain.
+					 */
+					pgc_pcie: power-domain@1 {
+						#power-domain-cells = <0>;
+						reg = <IMX8M_POWER_DOMAIN_PCIE1>;
+						power-domains = <&pgc_pcie2>;
+					};
+
+					pgc_otg1: power-domain@2 {
+						#power-domain-cells = <0>;
+						reg = <IMX8M_POWER_DOMAIN_USB_OTG1>;
+					};
+
+					pgc_otg2: power-domain@3 {
+						#power-domain-cells = <0>;
+						reg = <IMX8M_POWER_DOMAIN_USB_OTG2>;
+					};
+
+					pgc_ddr1: power-domain@4 {
+						#power-domain-cells = <0>;
+						reg = <IMX8M_POWER_DOMAIN_DDR1>;
+					};
+
+					pgc_gpu: power-domain@5 {
+						#power-domain-cells = <0>;
+						reg = <IMX8M_POWER_DOMAIN_GPU>;
+						clocks = <&clk IMX8MQ_CLK_GPU_ROOT>,
+						         <&clk IMX8MQ_CLK_GPU_SHADER_DIV>,
+							 <&clk IMX8MQ_CLK_GPU_AXI>,
+						         <&clk IMX8MQ_CLK_GPU_AHB>;
+					};
+
+					pgc_vpu: power-domain@6 {
+						#power-domain-cells = <0>;
+						reg = <IMX8M_POWER_DOMAIN_VPU>;
+					};
+
+					pgc_disp: power-domain@7 {
+						#power-domain-cells = <0>;
+						reg = <IMX8M_POWER_DOMAIN_DISP>;
+					};
+
+					pgc_mipi_csi1: power-domain@8 {
+						#power-domain-cells = <0>;
+						reg = <IMX8M_POWER_DOMAIN_MIPI_CSI1>;
+					};
+
+					pgc_mipi_csi2: power-domain@9 {
+						#power-domain-cells = <0>;
+						reg = <IMX8M_POWER_DOMAIN_MIPI_CSI2>;
+					};
+
+					pgc_pcie2: power-domain@a {
+						#power-domain-cells = <0>;
+						reg = <IMX8M_POWER_DOMAIN_PCIE2>;
+					};
+				};
+			};
+		};
+
+		bus@30400000 { /* AIPS2 */
+			compatible = "fsl,imx8mq-aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x30400000 0x30400000 0x400000>;
+
+			pwm1: pwm@30660000 {
+				compatible = "fsl,imx8mq-pwm", "fsl,imx27-pwm";
+				reg = <0x30660000 0x10000>;
+				interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_PWM1_ROOT>,
+				         <&clk IMX8MQ_CLK_PWM1_ROOT>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+				status = "disabled";
+			};
+
+			pwm2: pwm@30670000 {
+				compatible = "fsl,imx8mq-pwm", "fsl,imx27-pwm";
+				reg = <0x30670000 0x10000>;
+				interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_PWM2_ROOT>,
+				         <&clk IMX8MQ_CLK_PWM2_ROOT>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+				status = "disabled";
+			};
+
+			pwm3: pwm@30680000 {
+				compatible = "fsl,imx8mq-pwm", "fsl,imx27-pwm";
+				reg = <0x30680000 0x10000>;
+				interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_PWM3_ROOT>,
+				         <&clk IMX8MQ_CLK_PWM3_ROOT>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+				status = "disabled";
+			};
+
+			pwm4: pwm@30690000 {
+				compatible = "fsl,imx8mq-pwm", "fsl,imx27-pwm";
+				reg = <0x30690000 0x10000>;
+				interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_PWM4_ROOT>,
+				         <&clk IMX8MQ_CLK_PWM4_ROOT>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+				status = "disabled";
+			};
+
+			system_counter: timer@306a0000 {
+				compatible = "nxp,sysctr-timer";
+				reg = <0x306a0000 0x20000>;
+				interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&osc_25m>;
+				clock-names = "per";
+			};
+		};
+
+		bus@30800000 { /* AIPS3 */
+			compatible = "fsl,imx8mq-aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x30800000 0x30800000 0x400000>,
+				 <0x08000000 0x08000000 0x10000000>;
+
+			ecspi1: spi@30820000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx8mq-ecspi", "fsl,imx51-ecspi";
+				reg = <0x30820000 0x10000>;
+				interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_ECSPI1_ROOT>,
+					 <&clk IMX8MQ_CLK_ECSPI1_ROOT>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			ecspi2: spi@30830000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx8mq-ecspi", "fsl,imx51-ecspi";
+				reg = <0x30830000 0x10000>;
+				interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_ECSPI2_ROOT>,
+					 <&clk IMX8MQ_CLK_ECSPI2_ROOT>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			ecspi3: spi@30840000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx8mq-ecspi", "fsl,imx51-ecspi";
+				reg = <0x30840000 0x10000>;
+				interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_ECSPI3_ROOT>,
+					 <&clk IMX8MQ_CLK_ECSPI3_ROOT>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			uart1: serial@30860000 {
+				compatible = "fsl,imx8mq-uart",
+				             "fsl,imx6q-uart";
+				reg = <0x30860000 0x10000>;
+				interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_UART1_ROOT>,
+				         <&clk IMX8MQ_CLK_UART1_ROOT>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			uart3: serial@30880000 {
+				compatible = "fsl,imx8mq-uart",
+				             "fsl,imx6q-uart";
+				reg = <0x30880000 0x10000>;
+				interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_UART3_ROOT>,
+				         <&clk IMX8MQ_CLK_UART3_ROOT>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			uart2: serial@30890000 {
+				compatible = "fsl,imx8mq-uart",
+				             "fsl,imx6q-uart";
+				reg = <0x30890000 0x10000>;
+				interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_UART2_ROOT>,
+				         <&clk IMX8MQ_CLK_UART2_ROOT>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			sai2: sai@308b0000 {
+				#sound-dai-cells = <0>;
+				compatible = "fsl,imx8mq-sai";
+				reg = <0x308b0000 0x10000>;
+				interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_SAI2_IPG>,
+					 <&clk IMX8MQ_CLK_SAI2_ROOT>,
+					 <&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_CLK_DUMMY>;
+				clock-names = "bus", "mclk1", "mclk2", "mclk3";
+				dmas = <&sdma1 10 24 0>, <&sdma1 11 24 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			crypto: crypto@30900000 {
+				compatible = "fsl,sec-v4.0";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x30900000 0x40000>;
+				ranges = <0 0x30900000 0x40000>;
+				interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_AHB>,
+					 <&clk IMX8MQ_CLK_IPG_ROOT>;
+				clock-names = "aclk", "ipg";
+
+				sec_jr0: jr@1000 {
+					compatible = "fsl,sec-v4.0-job-ring";
+					reg = <0x1000 0x1000>;
+					interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				sec_jr1: jr@2000 {
+					compatible = "fsl,sec-v4.0-job-ring";
+					reg = <0x2000 0x1000>;
+					interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				sec_jr2: jr@3000 {
+					compatible = "fsl,sec-v4.0-job-ring";
+					reg = <0x3000 0x1000>;
+					interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+				};
+			};
+
+			dphy: dphy@30a00300 {
+				compatible = "fsl,imx8mq-mipi-dphy";
+				reg = <0x30a00300 0x100>;
+				clocks = <&clk IMX8MQ_CLK_DSI_PHY_REF>;
+				clock-names = "phy_ref";
+				assigned-clocks = <&clk IMX8MQ_CLK_DSI_PHY_REF>;
+				assigned-clock-parents = <&clk IMX8MQ_VIDEO_PLL1_OUT>;
+				assigned-clock-rates = <24000000>;
+				#phy-cells = <0>;
+				power-domains = <&pgc_mipi>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@30a20000 {
+				compatible = "fsl,imx8mq-i2c", "fsl,imx21-i2c";
+				reg = <0x30a20000 0x10000>;
+				interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_I2C1_ROOT>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@30a30000 {
+				compatible = "fsl,imx8mq-i2c", "fsl,imx21-i2c";
+				reg = <0x30a30000 0x10000>;
+				interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_I2C2_ROOT>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@30a40000 {
+				compatible = "fsl,imx8mq-i2c", "fsl,imx21-i2c";
+				reg = <0x30a40000 0x10000>;
+				interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_I2C3_ROOT>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c4: i2c@30a50000 {
+				compatible = "fsl,imx8mq-i2c", "fsl,imx21-i2c";
+				reg = <0x30a50000 0x10000>;
+				interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_I2C4_ROOT>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			uart4: serial@30a60000 {
+				compatible = "fsl,imx8mq-uart",
+				             "fsl,imx6q-uart";
+				reg = <0x30a60000 0x10000>;
+				interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_UART4_ROOT>,
+				         <&clk IMX8MQ_CLK_UART4_ROOT>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			usdhc1: mmc@30b40000 {
+				compatible = "fsl,imx8mq-usdhc",
+				             "fsl,imx7d-usdhc";
+				reg = <0x30b40000 0x10000>;
+				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_DUMMY>,
+				         <&clk IMX8MQ_CLK_NAND_USDHC_BUS>,
+				         <&clk IMX8MQ_CLK_USDHC1_ROOT>;
+				clock-names = "ipg", "ahb", "per";
+				assigned-clocks = <&clk IMX8MQ_CLK_USDHC1>;
+				assigned-clock-rates = <400000000>;
+				fsl,tuning-start-tap = <20>;
+				fsl,tuning-step = <2>;
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			usdhc2: mmc@30b50000 {
+				compatible = "fsl,imx8mq-usdhc",
+				             "fsl,imx7d-usdhc";
+				reg = <0x30b50000 0x10000>;
+				interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_DUMMY>,
+				         <&clk IMX8MQ_CLK_NAND_USDHC_BUS>,
+				         <&clk IMX8MQ_CLK_USDHC2_ROOT>;
+				clock-names = "ipg", "ahb", "per";
+				fsl,tuning-start-tap = <20>;
+				fsl,tuning-step = <2>;
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			qspi0: spi@30bb0000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx8mq-qspi", "fsl,imx7d-qspi";
+				reg = <0x30bb0000 0x10000>,
+				      <0x08000000 0x10000000>;
+				reg-names = "QuadSPI", "QuadSPI-memory";
+				interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_QSPI_ROOT>,
+					 <&clk IMX8MQ_CLK_QSPI_ROOT>;
+				clock-names = "qspi_en", "qspi";
+				status = "disabled";
+			};
+
+			sdma1: sdma@30bd0000 {
+				compatible = "fsl,imx8mq-sdma","fsl,imx7d-sdma";
+				reg = <0x30bd0000 0x10000>;
+				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_SDMA1_ROOT>,
+					 <&clk IMX8MQ_CLK_AHB>;
+				clock-names = "ipg", "ahb";
+				#dma-cells = <3>;
+				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
+			};
+
+			fec1: ethernet@30be0000 {
+				compatible = "fsl,imx8mq-fec", "fsl,imx6sx-fec";
+				reg = <0x30be0000 0x10000>;
+				interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+				             <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
+				             <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_ENET1_ROOT>,
+				         <&clk IMX8MQ_CLK_ENET1_ROOT>,
+				         <&clk IMX8MQ_CLK_ENET_TIMER>,
+				         <&clk IMX8MQ_CLK_ENET_REF>,
+				         <&clk IMX8MQ_CLK_ENET_PHY_REF>;
+				clock-names = "ipg", "ahb", "ptp",
+				              "enet_clk_ref", "enet_out";
+				fsl,num-tx-queues = <3>;
+				fsl,num-rx-queues = <3>;
+				status = "disabled";
+			};
+		};
+
+		bus@32c00000 { /* AIPS4 */
+			compatible = "fsl,imx8mq-aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x32c00000 0x32c00000 0x400000>;
+
+			irqsteer: interrupt-controller@32e2d000 {
+				compatible = "fsl,imx8m-irqsteer", "fsl,imx-irqsteer";
+				reg = <0x32e2d000 0x1000>;
+				interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_DISP_APB_ROOT>;
+				clock-names = "ipg";
+				fsl,channel = <0>;
+				fsl,num-irqs = <64>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		gpu: gpu@38000000 {
+			compatible = "vivante,gc";
+			reg = <0x38000000 0x40000>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk IMX8MQ_CLK_GPU_ROOT>,
+			         <&clk IMX8MQ_CLK_GPU_SHADER_DIV>,
+			         <&clk IMX8MQ_CLK_GPU_AXI>,
+			         <&clk IMX8MQ_CLK_GPU_AHB>;
+			clock-names = "core", "shader", "bus", "reg";
+			assigned-clocks = <&clk IMX8MQ_CLK_GPU_CORE_SRC>,
+			                  <&clk IMX8MQ_CLK_GPU_SHADER_SRC>,
+			                  <&clk IMX8MQ_CLK_GPU_AXI>,
+			                  <&clk IMX8MQ_CLK_GPU_AHB>,
+			                  <&clk IMX8MQ_GPU_PLL_BYPASS>;
+			assigned-clock-parents = <&clk IMX8MQ_GPU_PLL_OUT>,
+			                         <&clk IMX8MQ_GPU_PLL_OUT>,
+			                         <&clk IMX8MQ_GPU_PLL_OUT>,
+			                         <&clk IMX8MQ_GPU_PLL_OUT>,
+			                         <&clk IMX8MQ_GPU_PLL>;
+			assigned-clock-rates = <800000000>, <800000000>,
+			                       <800000000>, <800000000>, <0>;
+			power-domains = <&pgc_gpu>;
+		};
+
+		usb_dwc3_0: usb@38100000 {
+			compatible = "fsl,imx8mq-dwc3", "snps,dwc3";
+			reg = <0x38100000 0x10000>;
+			clocks = <&clk IMX8MQ_CLK_USB1_CTRL_ROOT>,
+			         <&clk IMX8MQ_CLK_USB_CORE_REF>,
+				 <&clk IMX8MQ_CLK_32K>;
+			clock-names = "bus_early", "ref", "suspend";
+			assigned-clocks = <&clk IMX8MQ_CLK_USB_BUS>,
+			                  <&clk IMX8MQ_CLK_USB_CORE_REF>;
+			assigned-clock-parents = <&clk IMX8MQ_SYS2_PLL_500M>,
+			                         <&clk IMX8MQ_SYS1_PLL_100M>;
+			assigned-clock-rates = <500000000>, <100000000>;
+			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&usb3_phy0>, <&usb3_phy0>;
+			phy-names = "usb2-phy", "usb3-phy";
+			power-domains = <&pgc_otg1>;
+			usb3-resume-missing-cas;
+			status = "disabled";
+		};
+
+		usb3_phy0: usb-phy@381f0040 {
+			compatible = "fsl,imx8mq-usb-phy";
+			reg = <0x381f0040 0x40>;
+			clocks = <&clk IMX8MQ_CLK_USB1_PHY_ROOT>;
+			clock-names = "phy";
+			assigned-clocks = <&clk IMX8MQ_CLK_USB_PHY_REF>;
+			assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_100M>;
+			assigned-clock-rates = <100000000>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		usb_dwc3_1: usb@38200000 {
+			compatible = "fsl,imx8mq-dwc3", "snps,dwc3";
+			reg = <0x38200000 0x10000>;
+			clocks = <&clk IMX8MQ_CLK_USB2_CTRL_ROOT>,
+			         <&clk IMX8MQ_CLK_USB_CORE_REF>,
+				 <&clk IMX8MQ_CLK_32K>;
+			clock-names = "bus_early", "ref", "suspend";
+			assigned-clocks = <&clk IMX8MQ_CLK_USB_BUS>,
+			                  <&clk IMX8MQ_CLK_USB_CORE_REF>;
+			assigned-clock-parents = <&clk IMX8MQ_SYS2_PLL_500M>,
+			                         <&clk IMX8MQ_SYS1_PLL_100M>;
+			assigned-clock-rates = <500000000>, <100000000>;
+			interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&usb3_phy1>, <&usb3_phy1>;
+			phy-names = "usb2-phy", "usb3-phy";
+			power-domains = <&pgc_otg2>;
+			usb3-resume-missing-cas;
+			status = "disabled";
+		};
+
+		usb3_phy1: usb-phy@382f0040 {
+			compatible = "fsl,imx8mq-usb-phy";
+			reg = <0x382f0040 0x40>;
+			clocks = <&clk IMX8MQ_CLK_USB2_PHY_ROOT>;
+			clock-names = "phy";
+			assigned-clocks = <&clk IMX8MQ_CLK_USB_PHY_REF>;
+			assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_100M>;
+			assigned-clock-rates = <100000000>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		pcie0: pcie@33800000 {
+			compatible = "fsl,imx8mq-pcie";
+			reg = <0x33800000 0x400000>,
+			      <0x1ff00000 0x80000>;
+			reg-names = "dbi", "config";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			bus-range = <0x00 0xff>;
+			ranges = <0x81000000 0 0x00000000 0x1ff80000 0 0x00010000 /* downstream I/O 64KB */
+			          0x82000000 0 0x18000000 0x18000000 0 0x07f00000>; /* non-prefetchable memory */
+			num-lanes = <1>;
+			num-viewport = <4>;
+			interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &gic GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+			                <0 0 0 2 &gic GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+			                <0 0 0 3 &gic GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+			                <0 0 0 4 &gic GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+			fsl,max-link-speed = <2>;
+			power-domains = <&pgc_pcie>;
+			resets = <&src IMX8MQ_RESET_PCIEPHY>,
+			         <&src IMX8MQ_RESET_PCIE_CTRL_APPS_EN>,
+			         <&src IMX8MQ_RESET_PCIE_CTRL_APPS_TURNOFF>;
+			reset-names = "pciephy", "apps", "turnoff";
+			status = "disabled";
+		};
+
+		pcie1: pcie@33c00000 {
+			compatible = "fsl,imx8mq-pcie";
+			reg = <0x33c00000 0x400000>,
+			      <0x27f00000 0x80000>;
+			reg-names = "dbi", "config";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			ranges =  <0x81000000 0 0x00000000 0x27f80000 0 0x00010000 /* downstream I/O 64KB */
+				   0x82000000 0 0x20000000 0x20000000 0 0x07f00000>; /* non-prefetchable memory */
+			num-lanes = <1>;
+			num-viewport = <4>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &gic GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &gic GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &gic GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			fsl,max-link-speed = <2>;
+			power-domains = <&pgc_pcie>;
+			resets = <&src IMX8MQ_RESET_PCIEPHY2>,
+			         <&src IMX8MQ_RESET_PCIE2_CTRL_APPS_EN>,
+			         <&src IMX8MQ_RESET_PCIE2_CTRL_APPS_TURNOFF>;
+			reset-names = "pciephy", "apps", "turnoff";
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@38800000 {
+			compatible = "arm,gic-v3";
+			reg = <0x38800000 0x10000>,	/* GIC Dist */
+			      <0x38880000 0xc0000>,	/* GICR */
+			      <0x31000000 0x2000>,	/* GICC */
+			      <0x31010000 0x2000>,	/* GICV */
+			      <0x31020000 0x2000>;	/* GICH */
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-parent = <&gic>;
+		};
+
+		ddr-pmu@3d800000 {
+			compatible = "fsl,imx8mq-ddr-pmu", "fsl,imx8m-ddr-pmu";
+			reg = <0x3d800000 0x400000>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+		};
+	};
+};