| /* |
| * SH7751 PCI Controller (PCIC) for U-Boot. |
| * (C) Dustin McIntire (dustin@sensoria.com) |
| * (C) 2007,2008 Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| #include <common.h> |
| #include <pci.h> |
| #include <asm/processor.h> |
| #include <asm/io.h> |
| #include <asm/pci.h> |
| |
| /* Register addresses and such */ |
| #define SH7751_BCR1 (vu_long *)0xFF800000 |
| #define SH7751_BCR2 (vu_short *)0xFF800004 |
| #define SH7751_WCR1 (vu_long *)0xFF800008 |
| #define SH7751_WCR2 (vu_long *)0xFF80000C |
| #define SH7751_WCR3 (vu_long *)0xFF800010 |
| #define SH7751_MCR (vu_long *)0xFF800014 |
| #define SH7751_BCR3 (vu_short *)0xFF800050 |
| #define SH7751_PCICONF0 (vu_long *)0xFE200000 |
| #define SH7751_PCICONF1 (vu_long *)0xFE200004 |
| #define SH7751_PCICONF2 (vu_long *)0xFE200008 |
| #define SH7751_PCICONF3 (vu_long *)0xFE20000C |
| #define SH7751_PCICONF4 (vu_long *)0xFE200010 |
| #define SH7751_PCICONF5 (vu_long *)0xFE200014 |
| #define SH7751_PCICONF6 (vu_long *)0xFE200018 |
| #define SH7751_PCICR (vu_long *)0xFE200100 |
| #define SH7751_PCILSR0 (vu_long *)0xFE200104 |
| #define SH7751_PCILSR1 (vu_long *)0xFE200108 |
| #define SH7751_PCILAR0 (vu_long *)0xFE20010C |
| #define SH7751_PCILAR1 (vu_long *)0xFE200110 |
| #define SH7751_PCIMBR (vu_long *)0xFE2001C4 |
| #define SH7751_PCIIOBR (vu_long *)0xFE2001C8 |
| #define SH7751_PCIPINT (vu_long *)0xFE2001CC |
| #define SH7751_PCIPINTM (vu_long *)0xFE2001D0 |
| #define SH7751_PCICLKR (vu_long *)0xFE2001D4 |
| #define SH7751_PCIBCR1 (vu_long *)0xFE2001E0 |
| #define SH7751_PCIBCR2 (vu_long *)0xFE2001E4 |
| #define SH7751_PCIWCR1 (vu_long *)0xFE2001E8 |
| #define SH7751_PCIWCR2 (vu_long *)0xFE2001EC |
| #define SH7751_PCIWCR3 (vu_long *)0xFE2001F0 |
| #define SH7751_PCIMCR (vu_long *)0xFE2001F4 |
| #define SH7751_PCIBCR3 (vu_long *)0xFE2001F8 |
| |
| #define BCR1_BREQEN 0x00080000 |
| #define PCI_SH7751_ID 0x35051054 |
| #define PCI_SH7751R_ID 0x350E1054 |
| #define SH7751_PCICONF1_WCC 0x00000080 |
| #define SH7751_PCICONF1_PER 0x00000040 |
| #define SH7751_PCICONF1_BUM 0x00000004 |
| #define SH7751_PCICONF1_MES 0x00000002 |
| #define SH7751_PCICONF1_CMDS 0x000000C6 |
| #define SH7751_PCI_HOST_BRIDGE 0x6 |
| #define SH7751_PCICR_PREFIX 0xa5000000 |
| #define SH7751_PCICR_PRST 0x00000002 |
| #define SH7751_PCICR_CFIN 0x00000001 |
| #define SH7751_PCIPINT_D3 0x00000002 |
| #define SH7751_PCIPINT_D0 0x00000001 |
| #define SH7751_PCICLKR_PREFIX 0xa5000000 |
| |
| #define SH7751_PCI_MEM_BASE 0xFD000000 |
| #define SH7751_PCI_MEM_SIZE 0x01000000 |
| #define SH7751_PCI_IO_BASE 0xFE240000 |
| #define SH7751_PCI_IO_SIZE 0x00040000 |
| |
| #define SH7751_CS3_BASE_ADDR 0x0C000000 |
| #define SH7751_P2CS3_BASE_ADDR 0xAC000000 |
| |
| #define SH7751_PCIPAR (vu_long *)0xFE2001C0 |
| #define SH7751_PCIPDR (vu_long *)0xFE200220 |
| |
| #define p4_in(addr) (*addr) |
| #define p4_out(data, addr) (*addr) = (data) |
| |
| /* Double word */ |
| int pci_sh4_read_config_dword(struct pci_controller *hose, |
| pci_dev_t dev, int offset, u32 *value) |
| { |
| u32 par_data = 0x80000000 | dev; |
| |
| p4_out(par_data | (offset & 0xfc), SH7751_PCIPAR); |
| *value = p4_in(SH7751_PCIPDR); |
| |
| return 0; |
| } |
| |
| int pci_sh4_write_config_dword(struct pci_controller *hose, |
| pci_dev_t dev, int offset, u32 value) |
| { |
| u32 par_data = 0x80000000 | dev; |
| |
| p4_out(par_data | (offset & 0xfc), SH7751_PCIPAR); |
| p4_out(value, SH7751_PCIPDR); |
| |
| return 0; |
| } |
| |
| int pci_sh7751_init(struct pci_controller *hose) |
| { |
| /* Double-check that we're a 7751 or 7751R chip */ |
| if (p4_in(SH7751_PCICONF0) != PCI_SH7751_ID |
| && p4_in(SH7751_PCICONF0) != PCI_SH7751R_ID) { |
| printf("PCI: Unknown PCI host bridge.\n"); |
| return 1; |
| } |
| printf("PCI: SH7751 PCI host bridge found.\n"); |
| |
| /* Double-check some BSC config settings */ |
| /* (Area 3 non-MPX 32-bit, PCI bus pins) */ |
| if ((p4_in(SH7751_BCR1) & 0x20008) == 0x20000) { |
| printf("SH7751_BCR1 value is wrong(0x%08X)\n", |
| (unsigned int)p4_in(SH7751_BCR1)); |
| return 2; |
| } |
| if ((p4_in(SH7751_BCR2) & 0xC0) != 0xC0) { |
| printf("SH7751_BCR2 value is wrong(0x%08X)\n", |
| (unsigned int)p4_in(SH7751_BCR2)); |
| return 3; |
| } |
| if (p4_in(SH7751_BCR2) & 0x01) { |
| printf("SH7751_BCR2 value is wrong(0x%08X)\n", |
| (unsigned int)p4_in(SH7751_BCR2)); |
| return 4; |
| } |
| |
| /* Force BREQEN in BCR1 to allow PCIC access */ |
| p4_out((p4_in(SH7751_BCR1) | BCR1_BREQEN), SH7751_BCR1); |
| |
| /* Toggle PCI reset pin */ |
| p4_out((SH7751_PCICR_PREFIX | SH7751_PCICR_PRST), SH7751_PCICR); |
| udelay(32); |
| p4_out(SH7751_PCICR_PREFIX, SH7751_PCICR); |
| |
| /* Set cmd bits: WCC, PER, BUM, MES */ |
| /* (Addr/Data stepping, Parity enabled, Bus Master, Memory enabled) */ |
| p4_out(0xfb900047, SH7751_PCICONF1); /* K.Kino */ |
| |
| /* Define this host as the host bridge */ |
| p4_out((SH7751_PCI_HOST_BRIDGE << 24), SH7751_PCICONF2); |
| |
| /* Force PCI clock(s) on */ |
| p4_out(0, SH7751_PCICLKR); |
| p4_out(0x03, SH7751_PCICLKR); |
| |
| /* Clear powerdown IRQs, also mask them (unused) */ |
| p4_out((SH7751_PCIPINT_D0 | SH7751_PCIPINT_D3), SH7751_PCIPINT); |
| p4_out(0, SH7751_PCIPINTM); |
| |
| p4_out(0xab000001, SH7751_PCICONF4); |
| |
| /* Set up target memory mappings (for external DMA access) */ |
| /* Map both P0 and P2 range to Area 3 RAM for ease of use */ |
| p4_out((64 - 1) << 20, SH7751_PCILSR0); |
| p4_out(SH7751_CS3_BASE_ADDR, SH7751_PCILAR0); |
| p4_out(0, SH7751_PCILSR1); |
| p4_out(0, SH7751_PCILAR1); |
| p4_out(SH7751_CS3_BASE_ADDR, SH7751_PCICONF5); |
| p4_out(0xd0000000, SH7751_PCICONF6); |
| |
| /* Map memory window to same address on PCI bus */ |
| p4_out(SH7751_PCI_MEM_BASE, SH7751_PCIMBR); |
| |
| /* Map IO window to same address on PCI bus */ |
| p4_out(0x2000 & 0xfffc0000, SH7751_PCIIOBR); |
| |
| /* set BREQEN */ |
| p4_out(inl(SH7751_BCR1) | 0x00080000, SH7751_BCR1); |
| |
| /* Copy BSC registers into PCI BSC */ |
| p4_out(inl(SH7751_BCR1), SH7751_PCIBCR1); |
| p4_out(inl(SH7751_BCR2), SH7751_PCIBCR2); |
| p4_out(inl(SH7751_BCR3), SH7751_PCIBCR3); |
| p4_out(inl(SH7751_WCR1), SH7751_PCIWCR1); |
| p4_out(inl(SH7751_WCR2), SH7751_PCIWCR2); |
| p4_out(inl(SH7751_WCR3), SH7751_PCIWCR3); |
| p4_out(inl(SH7751_MCR), SH7751_PCIMCR); |
| |
| /* Finally, set central function init complete */ |
| p4_out((SH7751_PCICR_PREFIX | SH7751_PCICR_CFIN), SH7751_PCICR); |
| |
| pci_sh4_init(hose); |
| |
| return 0; |
| } |