| /* |
| * SPI flash operations |
| * |
| * Copyright (C) 2008 Atmel Corporation |
| * Copyright (C) 2010 Reinhard Meyer, EMK Elektronik |
| * Copyright (C) 2013 Jagannadha Sutradharudu Teki, Xilinx Inc. |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #include <common.h> |
| #include <errno.h> |
| #include <malloc.h> |
| #include <spi.h> |
| #include <spi_flash.h> |
| #include <watchdog.h> |
| |
| #include "sf_internal.h" |
| |
| static void spi_flash_addr(u32 addr, u8 *cmd) |
| { |
| /* cmd[0] is actual command */ |
| cmd[1] = addr >> 16; |
| cmd[2] = addr >> 8; |
| cmd[3] = addr >> 0; |
| } |
| |
| int spi_flash_cmd_read_status(struct spi_flash *flash, u8 *rs) |
| { |
| int ret; |
| u8 cmd; |
| |
| cmd = CMD_READ_STATUS; |
| ret = spi_flash_read_common(flash, &cmd, 1, rs, 1); |
| if (ret < 0) { |
| debug("SF: fail to read status register\n"); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| int spi_flash_cmd_write_status(struct spi_flash *flash, u8 ws) |
| { |
| u8 cmd; |
| int ret; |
| |
| cmd = CMD_WRITE_STATUS; |
| ret = spi_flash_write_common(flash, &cmd, 1, &ws, 1); |
| if (ret < 0) { |
| debug("SF: fail to write status register\n"); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| #if defined(CONFIG_SPI_FLASH_SPANSION) || defined(CONFIG_SPI_FLASH_WINBOND) |
| int spi_flash_cmd_read_config(struct spi_flash *flash, u8 *rc) |
| { |
| int ret; |
| u8 cmd; |
| |
| cmd = CMD_READ_CONFIG; |
| ret = spi_flash_read_common(flash, &cmd, 1, rc, 1); |
| if (ret < 0) { |
| debug("SF: fail to read config register\n"); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| int spi_flash_cmd_write_config(struct spi_flash *flash, u8 wc) |
| { |
| u8 data[2]; |
| u8 cmd; |
| int ret; |
| |
| ret = spi_flash_cmd_read_status(flash, &data[0]); |
| if (ret < 0) |
| return ret; |
| |
| cmd = CMD_WRITE_STATUS; |
| data[1] = wc; |
| ret = spi_flash_write_common(flash, &cmd, 1, &data, 2); |
| if (ret) { |
| debug("SF: fail to write config register\n"); |
| return ret; |
| } |
| |
| return 0; |
| } |
| #endif |
| |
| #ifdef CONFIG_SPI_FLASH_BAR |
| static int spi_flash_cmd_bankaddr_write(struct spi_flash *flash, u8 bank_sel) |
| { |
| u8 cmd; |
| int ret; |
| |
| if (flash->bank_curr == bank_sel) { |
| debug("SF: not require to enable bank%d\n", bank_sel); |
| return 0; |
| } |
| |
| cmd = flash->bank_write_cmd; |
| ret = spi_flash_write_common(flash, &cmd, 1, &bank_sel, 1); |
| if (ret < 0) { |
| debug("SF: fail to write bank register\n"); |
| return ret; |
| } |
| flash->bank_curr = bank_sel; |
| |
| return 0; |
| } |
| |
| static int spi_flash_bank(struct spi_flash *flash, u32 offset) |
| { |
| u8 bank_sel; |
| int ret; |
| |
| bank_sel = offset / (SPI_FLASH_16MB_BOUN << flash->shift); |
| |
| ret = spi_flash_cmd_bankaddr_write(flash, bank_sel); |
| if (ret) { |
| debug("SF: fail to set bank%d\n", bank_sel); |
| return ret; |
| } |
| |
| return bank_sel; |
| } |
| #endif |
| |
| #ifdef CONFIG_SF_DUAL_FLASH |
| static void spi_flash_dual_flash(struct spi_flash *flash, u32 *addr) |
| { |
| switch (flash->dual_flash) { |
| case SF_DUAL_STACKED_FLASH: |
| if (*addr >= (flash->size >> 1)) { |
| *addr -= flash->size >> 1; |
| flash->spi->flags |= SPI_XFER_U_PAGE; |
| } else { |
| flash->spi->flags &= ~SPI_XFER_U_PAGE; |
| } |
| break; |
| case SF_DUAL_PARALLEL_FLASH: |
| *addr >>= flash->shift; |
| break; |
| default: |
| debug("SF: Unsupported dual_flash=%d\n", flash->dual_flash); |
| break; |
| } |
| } |
| #endif |
| |
| int spi_flash_cmd_wait_ready(struct spi_flash *flash, unsigned long timeout) |
| { |
| struct spi_slave *spi = flash->spi; |
| unsigned long timebase; |
| unsigned long flags = SPI_XFER_BEGIN; |
| int ret; |
| u8 status; |
| u8 check_status = 0x0; |
| u8 poll_bit = STATUS_WIP; |
| u8 cmd = flash->poll_cmd; |
| |
| if (cmd == CMD_FLAG_STATUS) { |
| poll_bit = STATUS_PEC; |
| check_status = poll_bit; |
| } |
| |
| #ifdef CONFIG_SF_DUAL_FLASH |
| if (spi->flags & SPI_XFER_U_PAGE) |
| flags |= SPI_XFER_U_PAGE; |
| #endif |
| ret = spi_xfer(spi, 8, &cmd, NULL, flags); |
| if (ret) { |
| debug("SF: fail to read %s status register\n", |
| cmd == CMD_READ_STATUS ? "read" : "flag"); |
| return ret; |
| } |
| |
| timebase = get_timer(0); |
| do { |
| WATCHDOG_RESET(); |
| |
| ret = spi_xfer(spi, 8, NULL, &status, 0); |
| if (ret) |
| return -1; |
| |
| if ((status & poll_bit) == check_status) |
| break; |
| |
| } while (get_timer(timebase) < timeout); |
| |
| spi_xfer(spi, 0, NULL, NULL, SPI_XFER_END); |
| |
| if ((status & poll_bit) == check_status) |
| return 0; |
| |
| /* Timed out */ |
| debug("SF: time out!\n"); |
| return -1; |
| } |
| |
| int spi_flash_write_common(struct spi_flash *flash, const u8 *cmd, |
| size_t cmd_len, const void *buf, size_t buf_len) |
| { |
| struct spi_slave *spi = flash->spi; |
| unsigned long timeout = SPI_FLASH_PROG_TIMEOUT; |
| int ret; |
| |
| if (buf == NULL) |
| timeout = SPI_FLASH_PAGE_ERASE_TIMEOUT; |
| |
| ret = spi_claim_bus(flash->spi); |
| if (ret) { |
| debug("SF: unable to claim SPI bus\n"); |
| return ret; |
| } |
| |
| ret = spi_flash_cmd_write_enable(flash); |
| if (ret < 0) { |
| debug("SF: enabling write failed\n"); |
| return ret; |
| } |
| |
| ret = spi_flash_cmd_write(spi, cmd, cmd_len, buf, buf_len); |
| if (ret < 0) { |
| debug("SF: write cmd failed\n"); |
| return ret; |
| } |
| |
| ret = spi_flash_cmd_wait_ready(flash, timeout); |
| if (ret < 0) { |
| debug("SF: write %s timed out\n", |
| timeout == SPI_FLASH_PROG_TIMEOUT ? |
| "program" : "page erase"); |
| return ret; |
| } |
| |
| spi_release_bus(spi); |
| |
| return ret; |
| } |
| |
| int spi_flash_cmd_erase_ops(struct spi_flash *flash, u32 offset, size_t len) |
| { |
| u32 erase_size, erase_addr; |
| u8 cmd[SPI_FLASH_CMD_LEN]; |
| int ret = -1; |
| |
| erase_size = flash->erase_size; |
| if (offset % erase_size || len % erase_size) { |
| debug("SF: Erase offset/length not multiple of erase size\n"); |
| return -1; |
| } |
| |
| cmd[0] = flash->erase_cmd; |
| while (len) { |
| erase_addr = offset; |
| |
| #ifdef CONFIG_SF_DUAL_FLASH |
| if (flash->dual_flash > SF_SINGLE_FLASH) |
| spi_flash_dual_flash(flash, &erase_addr); |
| #endif |
| #ifdef CONFIG_SPI_FLASH_BAR |
| ret = spi_flash_bank(flash, erase_addr); |
| if (ret < 0) |
| return ret; |
| #endif |
| spi_flash_addr(erase_addr, cmd); |
| |
| debug("SF: erase %2x %2x %2x %2x (%x)\n", cmd[0], cmd[1], |
| cmd[2], cmd[3], erase_addr); |
| |
| ret = spi_flash_write_common(flash, cmd, sizeof(cmd), NULL, 0); |
| if (ret < 0) { |
| debug("SF: erase failed\n"); |
| break; |
| } |
| |
| offset += erase_size; |
| len -= erase_size; |
| } |
| |
| return ret; |
| } |
| |
| int spi_flash_cmd_write_ops(struct spi_flash *flash, u32 offset, |
| size_t len, const void *buf) |
| { |
| unsigned long byte_addr, page_size; |
| u32 write_addr; |
| size_t chunk_len, actual; |
| u8 cmd[SPI_FLASH_CMD_LEN]; |
| int ret = -1; |
| |
| page_size = flash->page_size; |
| |
| cmd[0] = flash->write_cmd; |
| for (actual = 0; actual < len; actual += chunk_len) { |
| write_addr = offset; |
| |
| #ifdef CONFIG_SF_DUAL_FLASH |
| if (flash->dual_flash > SF_SINGLE_FLASH) |
| spi_flash_dual_flash(flash, &write_addr); |
| #endif |
| #ifdef CONFIG_SPI_FLASH_BAR |
| ret = spi_flash_bank(flash, write_addr); |
| if (ret < 0) |
| return ret; |
| #endif |
| byte_addr = offset % page_size; |
| chunk_len = min(len - actual, (size_t)(page_size - byte_addr)); |
| |
| if (flash->spi->max_write_size) |
| chunk_len = min(chunk_len, |
| (size_t)flash->spi->max_write_size); |
| |
| spi_flash_addr(write_addr, cmd); |
| |
| debug("SF: 0x%p => cmd = { 0x%02x 0x%02x%02x%02x } chunk_len = %zu\n", |
| buf + actual, cmd[0], cmd[1], cmd[2], cmd[3], chunk_len); |
| |
| ret = spi_flash_write_common(flash, cmd, sizeof(cmd), |
| buf + actual, chunk_len); |
| if (ret < 0) { |
| debug("SF: write failed\n"); |
| break; |
| } |
| |
| offset += chunk_len; |
| } |
| |
| return ret; |
| } |
| |
| int spi_flash_read_common(struct spi_flash *flash, const u8 *cmd, |
| size_t cmd_len, void *data, size_t data_len) |
| { |
| struct spi_slave *spi = flash->spi; |
| int ret; |
| |
| ret = spi_claim_bus(flash->spi); |
| if (ret) { |
| debug("SF: unable to claim SPI bus\n"); |
| return ret; |
| } |
| |
| ret = spi_flash_cmd_read(spi, cmd, cmd_len, data, data_len); |
| if (ret < 0) { |
| debug("SF: read cmd failed\n"); |
| return ret; |
| } |
| |
| spi_release_bus(spi); |
| |
| return ret; |
| } |
| |
| int spi_flash_cmd_read_ops(struct spi_flash *flash, u32 offset, |
| size_t len, void *data) |
| { |
| u8 *cmd, cmdsz; |
| u32 remain_len, read_len, read_addr; |
| int bank_sel = 0; |
| int ret = -1; |
| |
| /* Handle memory-mapped SPI */ |
| if (flash->memory_map) { |
| ret = spi_claim_bus(flash->spi); |
| if (ret) { |
| debug("SF: unable to claim SPI bus\n"); |
| return ret; |
| } |
| spi_xfer(flash->spi, 0, NULL, NULL, SPI_XFER_MMAP); |
| memcpy(data, flash->memory_map + offset, len); |
| spi_xfer(flash->spi, 0, NULL, NULL, SPI_XFER_MMAP_END); |
| spi_release_bus(flash->spi); |
| return 0; |
| } |
| |
| cmdsz = SPI_FLASH_CMD_LEN + flash->dummy_byte; |
| cmd = calloc(1, cmdsz); |
| if (!cmd) { |
| debug("SF: Failed to allocate cmd\n"); |
| return -ENOMEM; |
| } |
| |
| cmd[0] = flash->read_cmd; |
| while (len) { |
| read_addr = offset; |
| |
| #ifdef CONFIG_SF_DUAL_FLASH |
| if (flash->dual_flash > SF_SINGLE_FLASH) |
| spi_flash_dual_flash(flash, &read_addr); |
| #endif |
| #ifdef CONFIG_SPI_FLASH_BAR |
| bank_sel = spi_flash_bank(flash, read_addr); |
| if (bank_sel < 0) |
| return ret; |
| #endif |
| remain_len = ((SPI_FLASH_16MB_BOUN << flash->shift) * |
| (bank_sel + 1)) - offset; |
| if (len < remain_len) |
| read_len = len; |
| else |
| read_len = remain_len; |
| |
| spi_flash_addr(read_addr, cmd); |
| |
| ret = spi_flash_read_common(flash, cmd, cmdsz, data, read_len); |
| if (ret < 0) { |
| debug("SF: read failed\n"); |
| break; |
| } |
| |
| offset += read_len; |
| len -= read_len; |
| data += read_len; |
| } |
| |
| free(cmd); |
| return ret; |
| } |
| |
| #ifdef CONFIG_SPI_FLASH_SST |
| static int sst_byte_write(struct spi_flash *flash, u32 offset, const void *buf) |
| { |
| int ret; |
| u8 cmd[4] = { |
| CMD_SST_BP, |
| offset >> 16, |
| offset >> 8, |
| offset, |
| }; |
| |
| debug("BP[%02x]: 0x%p => cmd = { 0x%02x 0x%06x }\n", |
| spi_w8r8(flash->spi, CMD_READ_STATUS), buf, cmd[0], offset); |
| |
| ret = spi_flash_cmd_write_enable(flash); |
| if (ret) |
| return ret; |
| |
| ret = spi_flash_cmd_write(flash->spi, cmd, sizeof(cmd), buf, 1); |
| if (ret) |
| return ret; |
| |
| return spi_flash_cmd_wait_ready(flash, SPI_FLASH_PROG_TIMEOUT); |
| } |
| |
| int sst_write_wp(struct spi_flash *flash, u32 offset, size_t len, |
| const void *buf) |
| { |
| size_t actual, cmd_len; |
| int ret; |
| u8 cmd[4]; |
| |
| ret = spi_claim_bus(flash->spi); |
| if (ret) { |
| debug("SF: Unable to claim SPI bus\n"); |
| return ret; |
| } |
| |
| /* If the data is not word aligned, write out leading single byte */ |
| actual = offset % 2; |
| if (actual) { |
| ret = sst_byte_write(flash, offset, buf); |
| if (ret) |
| goto done; |
| } |
| offset += actual; |
| |
| ret = spi_flash_cmd_write_enable(flash); |
| if (ret) |
| goto done; |
| |
| cmd_len = 4; |
| cmd[0] = CMD_SST_AAI_WP; |
| cmd[1] = offset >> 16; |
| cmd[2] = offset >> 8; |
| cmd[3] = offset; |
| |
| for (; actual < len - 1; actual += 2) { |
| debug("WP[%02x]: 0x%p => cmd = { 0x%02x 0x%06x }\n", |
| spi_w8r8(flash->spi, CMD_READ_STATUS), buf + actual, |
| cmd[0], offset); |
| |
| ret = spi_flash_cmd_write(flash->spi, cmd, cmd_len, |
| buf + actual, 2); |
| if (ret) { |
| debug("SF: sst word program failed\n"); |
| break; |
| } |
| |
| ret = spi_flash_cmd_wait_ready(flash, SPI_FLASH_PROG_TIMEOUT); |
| if (ret) |
| break; |
| |
| cmd_len = 1; |
| offset += 2; |
| } |
| |
| if (!ret) |
| ret = spi_flash_cmd_write_disable(flash); |
| |
| /* If there is a single trailing byte, write it out */ |
| if (!ret && actual != len) |
| ret = sst_byte_write(flash, offset, buf + actual); |
| |
| done: |
| debug("SF: sst: program %s %zu bytes @ 0x%zx\n", |
| ret ? "failure" : "success", len, offset - actual); |
| |
| spi_release_bus(flash->spi); |
| return ret; |
| } |
| |
| int sst_write_bp(struct spi_flash *flash, u32 offset, size_t len, |
| const void *buf) |
| { |
| size_t actual; |
| int ret; |
| |
| ret = spi_claim_bus(flash->spi); |
| if (ret) { |
| debug("SF: Unable to claim SPI bus\n"); |
| return ret; |
| } |
| |
| for (actual = 0; actual < len; actual++) { |
| ret = sst_byte_write(flash, offset, buf + actual); |
| if (ret) { |
| debug("SF: sst byte program failed\n"); |
| break; |
| } |
| offset++; |
| } |
| |
| if (!ret) |
| ret = spi_flash_cmd_write_disable(flash); |
| |
| debug("SF: sst: program %s %zu bytes @ 0x%zx\n", |
| ret ? "failure" : "success", len, offset - actual); |
| |
| spi_release_bus(flash->spi); |
| return ret; |
| } |
| #endif |