drivers/mtd/spi/sf_internal.h - github/trini/u-boot - Gitiles

 /*
  * SPI flash internal definitions
  *
  * Copyright (C) 2008 Atmel Corporation
  * Copyright (C) 2013 Jagannadha Sutradharudu Teki, Xilinx Inc.
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */

 #ifndef _SF_INTERNAL_H_
 #define _SF_INTERNAL_H_

 #include <linux/types.h>
 #include <linux/compiler.h>

 /* Dual SPI flash memories - see SPI_COMM_DUAL_... */
 enum spi_dual_flash {
 	SF_SINGLE_FLASH	= 0,
 	SF_DUAL_STACKED_FLASH	= 1 << 0,
 	SF_DUAL_PARALLEL_FLASH	= 1 << 1,
 };

 /* Enum list - Full read commands */
 enum spi_read_cmds {
 	ARRAY_SLOW		= 1 << 0,
 	ARRAY_FAST		= 1 << 1,
 	DUAL_OUTPUT_FAST	= 1 << 2,
 	DUAL_IO_FAST		= 1 << 3,
 	QUAD_OUTPUT_FAST	= 1 << 4,
 	QUAD_IO_FAST		= 1 << 5,
 };

 /* Normal - Extended - Full command set */
 #define RD_NORM	(ARRAY_SLOW | ARRAY_FAST)
 #define RD_EXTN	(RD_NORM | DUAL_OUTPUT_FAST | DUAL_IO_FAST)
 #define RD_FULL	(RD_EXTN | QUAD_OUTPUT_FAST | QUAD_IO_FAST)

 /* sf param flags */
 enum {
 	SECT_4K		= 1 << 0,
 	SECT_32K	= 1 << 1,
 	E_FSR		= 1 << 2,
 	SST_BP		= 1 << 3,
 	SST_WP		= 1 << 4,
 	WR_QPP		= 1 << 5,
 };

 #define SST_WR		(SST_BP | SST_WP)

 #define SPI_FLASH_3B_ADDR_LEN		3
 #define SPI_FLASH_CMD_LEN		(1 + SPI_FLASH_3B_ADDR_LEN)
 #define SPI_FLASH_16MB_BOUN		0x1000000

 /* CFI Manufacture ID's */
 #define SPI_FLASH_CFI_MFR_SPANSION	0x01
 #define SPI_FLASH_CFI_MFR_STMICRO	0x20
 #define SPI_FLASH_CFI_MFR_MACRONIX	0xc2
 #define SPI_FLASH_CFI_MFR_WINBOND	0xef

 /* Erase commands */
 #define CMD_ERASE_4K			0x20
 #define CMD_ERASE_32K			0x52
 #define CMD_ERASE_CHIP			0xc7
 #define CMD_ERASE_64K			0xd8

 /* Write commands */
 #define CMD_WRITE_STATUS		0x01
 #define CMD_PAGE_PROGRAM		0x02
 #define CMD_WRITE_DISABLE		0x04
 #define CMD_READ_STATUS		0x05
 #define CMD_QUAD_PAGE_PROGRAM		0x32
 #define CMD_READ_STATUS1		0x35
 #define CMD_WRITE_ENABLE		0x06
 #define CMD_READ_CONFIG		0x35
 #define CMD_FLAG_STATUS		0x70

 /* Read commands */
 #define CMD_READ_ARRAY_SLOW		0x03
 #define CMD_READ_ARRAY_FAST		0x0b
 #define CMD_READ_DUAL_OUTPUT_FAST	0x3b
 #define CMD_READ_DUAL_IO_FAST		0xbb
 #define CMD_READ_QUAD_OUTPUT_FAST	0x6b
 #define CMD_READ_QUAD_IO_FAST		0xeb
 #define CMD_READ_ID			0x9f

 /* Bank addr access commands */
 #ifdef CONFIG_SPI_FLASH_BAR
 # define CMD_BANKADDR_BRWR		0x17
 # define CMD_BANKADDR_BRRD		0x16
 # define CMD_EXTNADDR_WREAR		0xC5
 # define CMD_EXTNADDR_RDEAR		0xC8
 #endif

 /* Common status */
 #define STATUS_WIP			(1 << 0)
 #define STATUS_QEB_WINSPAN		(1 << 1)
 #define STATUS_QEB_MXIC		(1 << 6)
 #define STATUS_PEC			(1 << 7)

 #ifdef CONFIG_SYS_SPI_ST_ENABLE_WP_PIN
 #define STATUS_SRWD			(1 << 7) /* SR write protect */
 #endif

 /* Flash timeout values */
 #define SPI_FLASH_PROG_TIMEOUT		(2 * CONFIG_SYS_HZ)
 #define SPI_FLASH_PAGE_ERASE_TIMEOUT		(5 * CONFIG_SYS_HZ)
 #define SPI_FLASH_SECTOR_ERASE_TIMEOUT	(10 * CONFIG_SYS_HZ)

 /* SST specific */
 #ifdef CONFIG_SPI_FLASH_SST
 # define CMD_SST_BP		0x02    /* Byte Program */
 # define CMD_SST_AAI_WP	0xAD	/* Auto Address Incr Word Program */

 int sst_write_wp(struct spi_flash *flash, u32 offset, size_t len,
 		const void *buf);
 int sst_write_bp(struct spi_flash *flash, u32 offset, size_t len,
 		const void *buf);
 #endif

 /**
  * struct spi_flash_params - SPI/QSPI flash device params structure
  *
  * @name:		Device name ([MANUFLETTER][DEVTYPE][DENSITY][EXTRAINFO])
  * @jedec:		Device jedec ID (0x[1byte_manuf_id][2byte_dev_id])
  * @ext_jedec:		Device ext_jedec ID
  * @sector_size:	Sector size of this device
  * @nr_sectors:	No.of sectors on this device
  * @e_rd_cmd:		Enum list for read commands
  * @flags:		Important param, for flash specific behaviour
  */
 struct spi_flash_params {
 	const char *name;
 	u32 jedec;
 	u16 ext_jedec;
 	u32 sector_size;
 	u32 nr_sectors;
 	u8 e_rd_cmd;
 	u16 flags;
 };

 extern const struct spi_flash_params spi_flash_params_table[];

 /* Send a single-byte command to the device and read the response */
 int spi_flash_cmd(struct spi_slave *spi, u8 cmd, void *response, size_t len);

 /*
  * Send a multi-byte command to the device and read the response. Used
  * for flash array reads, etc.
  */
 int spi_flash_cmd_read(struct spi_slave *spi, const u8 *cmd,
 		size_t cmd_len, void *data, size_t data_len);

 /*
  * Send a multi-byte command to the device followed by (optional)
  * data. Used for programming the flash array, etc.
  */
 int spi_flash_cmd_write(struct spi_slave *spi, const u8 *cmd, size_t cmd_len,
 		const void *data, size_t data_len);


 /* Flash erase(sectors) operation, support all possible erase commands */
 int spi_flash_cmd_erase_ops(struct spi_flash *flash, u32 offset, size_t len);

 /* Read the status register */
 int spi_flash_cmd_read_status(struct spi_flash *flash, u8 *rs);

 /* Program the status register */
 int spi_flash_cmd_write_status(struct spi_flash *flash, u8 ws);

 /* Read the config register */
 int spi_flash_cmd_read_config(struct spi_flash *flash, u8 *rc);

 /* Program the config register */
 int spi_flash_cmd_write_config(struct spi_flash *flash, u8 wc);

 /* Enable writing on the SPI flash */
 static inline int spi_flash_cmd_write_enable(struct spi_flash *flash)
 {
 	return spi_flash_cmd(flash->spi, CMD_WRITE_ENABLE, NULL, 0);
 }

 /* Disable writing on the SPI flash */
 static inline int spi_flash_cmd_write_disable(struct spi_flash *flash)
 {
 	return spi_flash_cmd(flash->spi, CMD_WRITE_DISABLE, NULL, 0);
 }

 /*
  * Send the read status command to the device and wait for the wip
  * (write-in-progress) bit to clear itself.
  */
 int spi_flash_cmd_wait_ready(struct spi_flash *flash, unsigned long timeout);

 /*
  * Used for spi_flash write operation
  * - SPI claim
  * - spi_flash_cmd_write_enable
  * - spi_flash_cmd_write
  * - spi_flash_cmd_wait_ready
  * - SPI release
  */
 int spi_flash_write_common(struct spi_flash *flash, const u8 *cmd,
 		size_t cmd_len, const void *buf, size_t buf_len);

 /*
  * Flash write operation, support all possible write commands.
  * Write the requested data out breaking it up into multiple write
  * commands as needed per the write size.
  */
 int spi_flash_cmd_write_ops(struct spi_flash *flash, u32 offset,
 		size_t len, const void *buf);

 /*
  * Same as spi_flash_cmd_read() except it also claims/releases the SPI
  * bus. Used as common part of the ->read() operation.
  */
 int spi_flash_read_common(struct spi_flash *flash, const u8 *cmd,
 		size_t cmd_len, void *data, size_t data_len);

 /* Flash read operation, support all possible read commands */
 int spi_flash_cmd_read_ops(struct spi_flash *flash, u32 offset,
 		size_t len, void *data);

 #endif /* _SF_INTERNAL_H_ */
	/*
	* SPI flash internal definitions
	*
	* Copyright (C) 2008 Atmel Corporation
	* Copyright (C) 2013 Jagannadha Sutradharudu Teki, Xilinx Inc.
	*
	* SPDX-License-Identifier: GPL-2.0+
	*/

	#ifndef _SF_INTERNAL_H_
	#define _SF_INTERNAL_H_

	#include <linux/types.h>
	#include <linux/compiler.h>

	/* Dual SPI flash memories - see SPI_COMM_DUAL_... */
	enum spi_dual_flash {
	SF_SINGLE_FLASH = 0,
	SF_DUAL_STACKED_FLASH = 1 << 0,
	SF_DUAL_PARALLEL_FLASH = 1 << 1,
	};

	/* Enum list - Full read commands */
	enum spi_read_cmds {
	ARRAY_SLOW = 1 << 0,
	ARRAY_FAST = 1 << 1,
	DUAL_OUTPUT_FAST = 1 << 2,
	DUAL_IO_FAST = 1 << 3,
	QUAD_OUTPUT_FAST = 1 << 4,
	QUAD_IO_FAST = 1 << 5,
	};

	/* Normal - Extended - Full command set */
	#define RD_NORM (ARRAY_SLOW \| ARRAY_FAST)
	#define RD_EXTN (RD_NORM \| DUAL_OUTPUT_FAST \| DUAL_IO_FAST)
	#define RD_FULL (RD_EXTN \| QUAD_OUTPUT_FAST \| QUAD_IO_FAST)

	/* sf param flags */
	enum {
	SECT_4K = 1 << 0,
	SECT_32K = 1 << 1,
	E_FSR = 1 << 2,
	SST_BP = 1 << 3,
	SST_WP = 1 << 4,
	WR_QPP = 1 << 5,
	};

	#define SST_WR (SST_BP \| SST_WP)

	#define SPI_FLASH_3B_ADDR_LEN 3
	#define SPI_FLASH_CMD_LEN (1 + SPI_FLASH_3B_ADDR_LEN)
	#define SPI_FLASH_16MB_BOUN 0x1000000

	/* CFI Manufacture ID's */
	#define SPI_FLASH_CFI_MFR_SPANSION 0x01
	#define SPI_FLASH_CFI_MFR_STMICRO 0x20
	#define SPI_FLASH_CFI_MFR_MACRONIX 0xc2
	#define SPI_FLASH_CFI_MFR_WINBOND 0xef

	/* Erase commands */
	#define CMD_ERASE_4K 0x20
	#define CMD_ERASE_32K 0x52
	#define CMD_ERASE_CHIP 0xc7
	#define CMD_ERASE_64K 0xd8

	/* Write commands */
	#define CMD_WRITE_STATUS 0x01
	#define CMD_PAGE_PROGRAM 0x02
	#define CMD_WRITE_DISABLE 0x04
	#define CMD_READ_STATUS 0x05
	#define CMD_QUAD_PAGE_PROGRAM 0x32
	#define CMD_READ_STATUS1 0x35
	#define CMD_WRITE_ENABLE 0x06
	#define CMD_READ_CONFIG 0x35
	#define CMD_FLAG_STATUS 0x70

	/* Read commands */
	#define CMD_READ_ARRAY_SLOW 0x03
	#define CMD_READ_ARRAY_FAST 0x0b
	#define CMD_READ_DUAL_OUTPUT_FAST 0x3b
	#define CMD_READ_DUAL_IO_FAST 0xbb
	#define CMD_READ_QUAD_OUTPUT_FAST 0x6b
	#define CMD_READ_QUAD_IO_FAST 0xeb
	#define CMD_READ_ID 0x9f

	/* Bank addr access commands */
	#ifdef CONFIG_SPI_FLASH_BAR
	# define CMD_BANKADDR_BRWR 0x17
	# define CMD_BANKADDR_BRRD 0x16
	# define CMD_EXTNADDR_WREAR 0xC5
	# define CMD_EXTNADDR_RDEAR 0xC8
	#endif

	/* Common status */
	#define STATUS_WIP (1 << 0)
	#define STATUS_QEB_WINSPAN (1 << 1)
	#define STATUS_QEB_MXIC (1 << 6)
	#define STATUS_PEC (1 << 7)

	#ifdef CONFIG_SYS_SPI_ST_ENABLE_WP_PIN
	#define STATUS_SRWD (1 << 7) /* SR write protect */
	#endif

	/* Flash timeout values */
	#define SPI_FLASH_PROG_TIMEOUT (2 * CONFIG_SYS_HZ)
	#define SPI_FLASH_PAGE_ERASE_TIMEOUT (5 * CONFIG_SYS_HZ)
	#define SPI_FLASH_SECTOR_ERASE_TIMEOUT (10 * CONFIG_SYS_HZ)

	/* SST specific */
	#ifdef CONFIG_SPI_FLASH_SST
	# define CMD_SST_BP 0x02 /* Byte Program */
	# define CMD_SST_AAI_WP 0xAD /* Auto Address Incr Word Program */

	int sst_write_wp(struct spi_flash *flash, u32 offset, size_t len,
	const void *buf);
	int sst_write_bp(struct spi_flash *flash, u32 offset, size_t len,
	const void *buf);
	#endif

	/**
	* struct spi_flash_params - SPI/QSPI flash device params structure
	*
	* @name: Device name ([MANUFLETTER][DEVTYPE][DENSITY][EXTRAINFO])
	* @jedec: Device jedec ID (0x[1byte_manuf_id][2byte_dev_id])
	* @ext_jedec: Device ext_jedec ID
	* @sector_size: Sector size of this device
	* @nr_sectors: No.of sectors on this device
	* @e_rd_cmd: Enum list for read commands
	* @flags: Important param, for flash specific behaviour
	*/
	struct spi_flash_params {
	const char *name;
	u32 jedec;
	u16 ext_jedec;
	u32 sector_size;
	u32 nr_sectors;
	u8 e_rd_cmd;
	u16 flags;
	};

	extern const struct spi_flash_params spi_flash_params_table[];

	/* Send a single-byte command to the device and read the response */
	int spi_flash_cmd(struct spi_slave spi, u8 cmd, void response, size_t len);

	/*
	* Send a multi-byte command to the device and read the response. Used
	* for flash array reads, etc.
	*/
	int spi_flash_cmd_read(struct spi_slave spi, const u8 cmd,
	size_t cmd_len, void *data, size_t data_len);

	/*
	* Send a multi-byte command to the device followed by (optional)
	* data. Used for programming the flash array, etc.
	*/
	int spi_flash_cmd_write(struct spi_slave spi, const u8 cmd, size_t cmd_len,
	const void *data, size_t data_len);


	/* Flash erase(sectors) operation, support all possible erase commands */
	int spi_flash_cmd_erase_ops(struct spi_flash *flash, u32 offset, size_t len);

	/* Read the status register */
	int spi_flash_cmd_read_status(struct spi_flash flash, u8 rs);

	/* Program the status register */
	int spi_flash_cmd_write_status(struct spi_flash *flash, u8 ws);

	/* Read the config register */
	int spi_flash_cmd_read_config(struct spi_flash flash, u8 rc);

	/* Program the config register */
	int spi_flash_cmd_write_config(struct spi_flash *flash, u8 wc);

	/* Enable writing on the SPI flash */
	static inline int spi_flash_cmd_write_enable(struct spi_flash *flash)
	{
	return spi_flash_cmd(flash->spi, CMD_WRITE_ENABLE, NULL, 0);
	}

	/* Disable writing on the SPI flash */
	static inline int spi_flash_cmd_write_disable(struct spi_flash *flash)
	{
	return spi_flash_cmd(flash->spi, CMD_WRITE_DISABLE, NULL, 0);
	}

	/*
	* Send the read status command to the device and wait for the wip
	* (write-in-progress) bit to clear itself.
	*/
	int spi_flash_cmd_wait_ready(struct spi_flash *flash, unsigned long timeout);

	/*
	* Used for spi_flash write operation
	* - SPI claim
	* - spi_flash_cmd_write_enable
	* - spi_flash_cmd_write
	* - spi_flash_cmd_wait_ready
	* - SPI release
	*/
	int spi_flash_write_common(struct spi_flash flash, const u8 cmd,
	size_t cmd_len, const void *buf, size_t buf_len);

	/*
	* Flash write operation, support all possible write commands.
	* Write the requested data out breaking it up into multiple write
	* commands as needed per the write size.
	*/
	int spi_flash_cmd_write_ops(struct spi_flash *flash, u32 offset,
	size_t len, const void *buf);

	/*
	* Same as spi_flash_cmd_read() except it also claims/releases the SPI
	* bus. Used as common part of the ->read() operation.
	*/
	int spi_flash_read_common(struct spi_flash flash, const u8 cmd,
	size_t cmd_len, void *data, size_t data_len);

	/* Flash read operation, support all possible read commands */
	int spi_flash_cmd_read_ops(struct spi_flash *flash, u32 offset,
	size_t len, void *data);

	#endif /* _SF_INTERNAL_H_ */