drivers/inca-ip_sw.c - github/trini/u-boot - Gitiles

 /*
  * INCA-IP internal switch ethernet driver.
  *
  * (C) Copyright 2003-2004
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
  * published by the Free Software Foundation; either version 2 of
  * the License, or (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  * MA 02111-1307 USA
  */


 #include <common.h>

 #if (CONFIG_COMMANDS & CFG_CMD_NET) && defined(CONFIG_NET_MULTI) \
 	&& defined(CONFIG_INCA_IP_SWITCH)

 #include <malloc.h>
 #include <net.h>
 #include <asm/inca-ip.h>
 #include <asm/addrspace.h>


 #define NUM_RX_DESC	PKTBUFSRX
 #define NUM_TX_DESC	3
 #define TOUT_LOOP	1000000


 #define DELAY	udelay(10000)
   /* Sometimes the store word instruction hangs while writing to one
    * of the Switch registers. Moving the instruction into a separate
    * function somehow makes the problem go away.
    */
 static void SWORD(volatile u32 * reg, u32 value)
 {
 	*reg = value;
 }

 #define DMA_WRITE_REG(reg, value) *((volatile u32 *)reg) = (u32)value;
 #define DMA_READ_REG(reg, value)    value = (u32)*((volatile u32*)reg)
 #define SW_WRITE_REG(reg, value)   \
 	SWORD(reg, value);\
 	DELAY;\
 	SWORD(reg, value);

 #define SW_READ_REG(reg, value)	   \
 	value = (u32)*((volatile u32*)reg);\
 	DELAY;\
 	value = (u32)*((volatile u32*)reg);

 #define INCA_DMA_TX_POLLING_TIME	0x07
 #define INCA_DMA_RX_POLLING_TIME	0x07

 #define INCA_DMA_TX_HOLD		0x80000000
 #define INCA_DMA_TX_EOP			0x40000000
 #define INCA_DMA_TX_SOP			0x20000000
 #define INCA_DMA_TX_ICPT		0x10000000
 #define INCA_DMA_TX_IEOP		0x08000000

 #define INCA_DMA_RX_C			0x80000000
 #define INCA_DMA_RX_SOP			0x40000000
 #define INCA_DMA_RX_EOP			0x20000000

 #define INCA_SWITCH_PHY_SPEED_10H	0x1
 #define INCA_SWITCH_PHY_SPEED_10F	0x5
 #define INCA_SWITCH_PHY_SPEED_100H	0x2
 #define INCA_SWITCH_PHY_SPEED_100F	0x6

 /************************ Auto MDIX settings ************************/
 #define INCA_IP_AUTO_MDIX_LAN_PORTS_DIR		INCA_IP_Ports_P1_DIR
 #define INCA_IP_AUTO_MDIX_LAN_PORTS_ALTSEL	INCA_IP_Ports_P1_ALTSEL
 #define INCA_IP_AUTO_MDIX_LAN_PORTS_OUT		INCA_IP_Ports_P1_OUT
 #define INCA_IP_AUTO_MDIX_LAN_GPIO_PIN_RXTX	16

 #define WAIT_SIGNAL_RETRIES			100
 #define WAIT_LINK_RETRIES			100
 #define LINK_RETRY_DELAY			2000  /* ms */
 /********************************************************************/

 typedef struct
 {
 	union {
 		struct {
 			volatile u32 HOLD		:1;
 			volatile u32 ICpt		:1;
 			volatile u32 IEop		:1;
 			volatile u32 offset		:3;
 			volatile u32 reserved0		:4;
 			volatile u32 NFB		:22;
 		}field;

 		volatile u32 word;
 	}params;

 	volatile u32 nextRxDescPtr;

 	volatile u32 RxDataPtr;

 	union {
 		struct {
 			volatile u32 C			:1;
 			volatile u32 Sop		:1;
 			volatile u32 Eop		:1;
 			volatile u32 reserved3		:12;
 			volatile u32 NBT		:17;
 		}field;

 		volatile u32 word;
 	}status;

 } inca_rx_descriptor_t;


 typedef struct
 {
 	union {
 		struct {
 			volatile u32 HOLD		:1;
 			volatile u32 Eop		:1;
 			volatile u32 Sop		:1;
 			volatile u32 ICpt		:1;
 			volatile u32 IEop		:1;
 			volatile u32 reserved0		:5;
 			volatile u32 NBA		:22;
 		}field;

 		volatile u32 word;
 	}params;

 	volatile u32 nextTxDescPtr;

 	volatile u32 TxDataPtr;

 	volatile u32 C			:1;
 	volatile u32 reserved3		:31;

 } inca_tx_descriptor_t;


 static inca_rx_descriptor_t rx_ring[NUM_RX_DESC] __attribute__ ((aligned(16)));
 static inca_tx_descriptor_t tx_ring[NUM_TX_DESC] __attribute__ ((aligned(16)));

 static int tx_new, rx_new, tx_hold, rx_hold;
 static int tx_old_hold = -1;
 static int initialized	= 0;


 static int inca_switch_init(struct eth_device *dev, bd_t * bis);
 static int inca_switch_send(struct eth_device *dev, volatile void *packet, int length);
 static int inca_switch_recv(struct eth_device *dev);
 static void inca_switch_halt(struct eth_device *dev);
 static void inca_init_switch_chip(void);
 static void inca_dma_init(void);
 static int inca_amdix(void);


 int inca_switch_initialize(bd_t * bis)
 {
 	struct eth_device *dev;

 #if 0
 	printf("Entered inca_switch_initialize()\n");
 #endif

 	if (!(dev = (struct eth_device *) malloc (sizeof *dev))) {
 		printf("Failed to allocate memory\n");
 		return 0;
 	}
 	memset(dev, 0, sizeof(*dev));

 	inca_dma_init();

 	inca_init_switch_chip();

 #if defined(CONFIG_INCA_IP_SWITCH_AMDIX)
 	inca_amdix();
 #endif

 	sprintf(dev->name, "INCA-IP Switch");
 	dev->init = inca_switch_init;
 	dev->halt = inca_switch_halt;
 	dev->send = inca_switch_send;
 	dev->recv = inca_switch_recv;

 	eth_register(dev);

 #if 0
 	printf("Leaving inca_switch_initialize()\n");
 #endif

 	return 1;
 }


 static int inca_switch_init(struct eth_device *dev, bd_t * bis)
 {
 	int i;
 	u32 v, regValue;
 	u16 wTmp;

 #if 0
 	printf("Entering inca_switch_init()\n");
 #endif

 	/* Set MAC address.
 	 */
 	wTmp = (u16)dev->enetaddr[0];
 	regValue = (wTmp << 8) | dev->enetaddr[1];

 	SW_WRITE_REG(INCA_IP_Switch_PMAC_SA1, regValue);

 	wTmp = (u16)dev->enetaddr[2];
 	regValue = (wTmp << 8) | dev->enetaddr[3];
 	regValue = regValue << 16;
 	wTmp = (u16)dev->enetaddr[4];
 	regValue |= (wTmp<<8) | dev->enetaddr[5];

 	SW_WRITE_REG(INCA_IP_Switch_PMAC_SA2, regValue);

 	/* Initialize the descriptor rings.
 	 */
 	for (i = 0; i < NUM_RX_DESC; i++) {
 		inca_rx_descriptor_t * rx_desc = KSEG1ADDR(&rx_ring[i]);
 		memset(rx_desc, 0, sizeof(rx_ring[i]));

 		/* Set maximum size of receive buffer.
 		 */
 		rx_desc->params.field.NFB = PKTSIZE_ALIGN;

 		/* Set the offset of the receive buffer. Zero means
 		 * that the offset mechanism is not used.
 		 */
 		rx_desc->params.field.offset = 0;

 		/* Check if it is the last descriptor.
 		 */
 		if (i == (NUM_RX_DESC - 1)) {
 			/* Let the last descriptor point to the first
 			 * one.
 			 */
 			rx_desc->nextRxDescPtr = KSEG1ADDR((u32)rx_ring);
 		} else {
 			/* Set the address of the next descriptor.
 			 */
 			rx_desc->nextRxDescPtr = (u32)KSEG1ADDR(&rx_ring[i+1]);
 		}

 		rx_desc->RxDataPtr = (u32)KSEG1ADDR(NetRxPackets[i]);
 	}

 #if 0
 	printf("rx_ring = 0x%08X 0x%08X\n", (u32)rx_ring, (u32)&rx_ring[0]);
 	printf("tx_ring = 0x%08X 0x%08X\n", (u32)tx_ring, (u32)&tx_ring[0]);
 #endif

 	for (i = 0; i < NUM_TX_DESC; i++) {
 		inca_tx_descriptor_t * tx_desc = KSEG1ADDR(&tx_ring[i]);

 		memset(tx_desc, 0, sizeof(tx_ring[i]));

 		tx_desc->params.word	   = 0;
 		tx_desc->params.field.HOLD = 1;
 		tx_desc->C		   = 1;

 			/* Check if it is the last descriptor.
 			 */
 		if (i == (NUM_TX_DESC - 1)) {
 				/* Let the last descriptor point to the
 				 * first one.
 				 */
 			tx_desc->nextTxDescPtr = KSEG1ADDR((u32)tx_ring);
 		} else {
 				/* Set the address of the next descriptor.
 				 */
 			tx_desc->nextTxDescPtr = (u32)KSEG1ADDR(&tx_ring[i+1]);
 		}
 	}

 	/* Initialize RxDMA.
 	 */
 	DMA_READ_REG(INCA_IP_DMA_DMA_RXISR, v);
 #if 0
 	printf("RX status = 0x%08X\n", v);
 #endif

 	/* Writing to the FRDA of CHANNEL.
 	 */
 	DMA_WRITE_REG(INCA_IP_DMA_DMA_RXFRDA0, (u32)rx_ring);

 	/* Writing to the COMMAND REG.
 	 */
 	DMA_WRITE_REG(INCA_IP_DMA_DMA_RXCCR0, INCA_IP_DMA_DMA_RXCCR0_INIT);

 	/* Initialize TxDMA.
 	 */
 	DMA_READ_REG(INCA_IP_DMA_DMA_TXISR, v);
 #if 0
 	printf("TX status = 0x%08X\n", v);
 #endif

 	/* Writing to the FRDA of CHANNEL.
 	 */
 	DMA_WRITE_REG(INCA_IP_DMA_DMA_TXFRDA0, (u32)tx_ring);

 	tx_new = rx_new = 0;

 	tx_hold = NUM_TX_DESC - 1;
 	rx_hold = NUM_RX_DESC - 1;

 #if 0
 	rx_ring[rx_hold].params.field.HOLD = 1;
 #endif
 	/* enable spanning tree forwarding, enable the CPU port */
 	/* ST_PT:
 	 *	CPS (CPU port status)	0x3 (forwarding)
 	 *	LPS (LAN port status)	0x3 (forwarding)
 	 *	PPS (PC port status)	0x3 (forwarding)
 	 */
 	SW_WRITE_REG(INCA_IP_Switch_ST_PT,0x3f);

 #if 0
 	printf("Leaving inca_switch_init()\n");
 #endif

 	return 0;
 }


 static int inca_switch_send(struct eth_device *dev, volatile void *packet, int length)
 {
 	int		       i;
 	int		       res	= -1;
 	u32		       command;
 	u32		       regValue;
 	inca_tx_descriptor_t * tx_desc	= KSEG1ADDR(&tx_ring[tx_new]);

 #if 0
 	printf("Entered inca_switch_send()\n");
 #endif

 	if (length <= 0) {
 		printf ("%s: bad packet size: %d\n", dev->name, length);
 		goto Done;
 	}

 	for(i = 0; tx_desc->C == 0; i++) {
 		if (i >= TOUT_LOOP) {
 			printf("%s: tx error buffer not ready\n", dev->name);
 			goto Done;
 		}
 	}

 	if (tx_old_hold >= 0) {
 		KSEG1ADDR(&tx_ring[tx_old_hold])->params.field.HOLD = 1;
 	}
 	tx_old_hold = tx_hold;

 	tx_desc->params.word =
 			(INCA_DMA_TX_SOP | INCA_DMA_TX_EOP | INCA_DMA_TX_HOLD);

 	tx_desc->C = 0;
 	tx_desc->TxDataPtr = (u32)packet;
 	tx_desc->params.field.NBA = length;

 	KSEG1ADDR(&tx_ring[tx_hold])->params.field.HOLD = 0;

 	tx_hold = tx_new;
 	tx_new	= (tx_new + 1) % NUM_TX_DESC;


 	if (! initialized) {
 		command = INCA_IP_DMA_DMA_TXCCR0_INIT;
 		initialized = 1;
 	} else {
 		command = INCA_IP_DMA_DMA_TXCCR0_HR;
 	}

 	DMA_READ_REG(INCA_IP_DMA_DMA_TXCCR0, regValue);
 	regValue |= command;
 #if 0
 	printf("regValue = 0x%x\n", regValue);
 #endif
 	DMA_WRITE_REG(INCA_IP_DMA_DMA_TXCCR0, regValue);

 #if 1
 	for(i = 0; KSEG1ADDR(&tx_ring[tx_hold])->C == 0; i++) {
 		if (i >= TOUT_LOOP) {
 			printf("%s: tx buffer not ready\n", dev->name);
 			goto Done;
 		}
 	}
 #endif
 	res = length;
 Done:
 #if 0
 	printf("Leaving inca_switch_send()\n");
 #endif
 	return res;
 }


 static int inca_switch_recv(struct eth_device *dev)
 {
 	int		       length  = 0;
 	inca_rx_descriptor_t * rx_desc;

 #if 0
 	printf("Entered inca_switch_recv()\n");
 #endif

 	for (;;) {
 		rx_desc = KSEG1ADDR(&rx_ring[rx_new]);

 		if (rx_desc->status.field.C == 0) {
 			break;
 		}

 #if 0
 		rx_ring[rx_new].params.field.HOLD = 1;
 #endif

 		if (! rx_desc->status.field.Eop) {
 			printf("Partly received packet!!!\n");
 			break;
 		}

 		length = rx_desc->status.field.NBT;
 		rx_desc->status.word &=
 			 ~(INCA_DMA_RX_EOP | INCA_DMA_RX_SOP | INCA_DMA_RX_C);
 #if 0
 {
   int i;
   for (i=0;i<length - 4;i++) {
     if (i % 16 == 0) printf("\n%04x: ", i);
     printf("%02X ", NetRxPackets[rx_new][i]);
   }
   printf("\n");
 }
 #endif

 		if (length) {
 #if 0
 			printf("Received %d bytes\n", length);
 #endif
 			NetReceive((void*)KSEG1ADDR(NetRxPackets[rx_new]), length - 4);
 		} else {
 #if 1
 			printf("Zero length!!!\n");
 #endif
 		}


 		KSEG1ADDR(&rx_ring[rx_hold])->params.field.HOLD = 0;

 		rx_hold = rx_new;

 		rx_new = (rx_new + 1) % NUM_RX_DESC;
 	}

 #if 0
 	printf("Leaving inca_switch_recv()\n");
 #endif

 	return length;
 }


 static void inca_switch_halt(struct eth_device *dev)
 {
 #if 0
 	printf("Entered inca_switch_halt()\n");
 #endif

 #if 1
 	initialized = 0;
 #endif
 #if 1
 	/* Disable forwarding to the CPU port.
 	 */
 	SW_WRITE_REG(INCA_IP_Switch_ST_PT,0xf);

 	/* Close RxDMA channel.
 	 */
 	DMA_WRITE_REG(INCA_IP_DMA_DMA_RXCCR0, INCA_IP_DMA_DMA_RXCCR0_OFF);

 	/* Close TxDMA channel.
 	 */
 	DMA_WRITE_REG(INCA_IP_DMA_DMA_TXCCR0, INCA_IP_DMA_DMA_TXCCR0_OFF);


 #endif
 #if 0
 	printf("Leaving inca_switch_halt()\n");
 #endif
 }


 static void inca_init_switch_chip(void)
 {
 	u32 regValue;

 	/* To workaround a problem with collision counter
 	 * (see Errata sheet).
 	 */
 	SW_WRITE_REG(INCA_IP_Switch_PC_TX_CTL, 0x00000001);
 	SW_WRITE_REG(INCA_IP_Switch_LAN_TX_CTL, 0x00000001);

 #if 1
 	/* init MDIO configuration:
 	 *	MDS (Poll speed):	0x01 (4ms)
 	 *	PHY_LAN_ADDR:		0x06
 	 *	PHY_PC_ADDR:		0x05
 	 *	UEP (Use External PHY): 0x00 (Internal PHY is used)
 	 *	PS (Port Select):	0x00 (PT/UMM for LAN)
 	 *	PT (PHY Test):		0x00 (no test mode)
 	 *	UMM (Use MDIO Mode):	0x00 (state machine is disabled)
 	 */
 	SW_WRITE_REG(INCA_IP_Switch_MDIO_CFG, 0x4c50);

 	/* init PHY:
 	 *	SL (Auto Neg. Speed for LAN)
 	 *	SP (Auto Neg. Speed for PC)
 	 *	LL (Link Status for LAN)
 	 *	LP (Link Status for PC)
 	 *	DL (Duplex Status for LAN)
 	 *	DP (Duplex Status for PC)
 	 *	PL (Auto Neg. Pause Status for LAN)
 	 *	PP (Auto Neg. Pause Status for PC)
 	 */
 	SW_WRITE_REG (INCA_IP_Switch_EPHY, 0xff);

 	/* MDIO_ACC:
 	 *	RA (Request/Ack)  0x01 (Request)
 	 *	RW (Read/Write)	  0x01 (Write)
 	 *	PHY_ADDR	  0x05 (PC)
 	 *	REG_ADDR	  0x00 (PHY_BCR: basic control register)
 	 *	PHY_DATA	  0x8000
 	 *		      Reset		      - software reset
 	 *		      LB (loop back)	      - normal
 	 *		      SS (speed select)	      - 10 Mbit/s
 	 *		      ANE (auto neg. enable)  - enable
 	 *		      PD (power down)	      - normal
 	 *		      ISO (isolate)	      - normal
 	 *		      RAN (restart auto neg.) - normal
 	 *		      DM (duplex mode)	      - half duplex
 	 *		      CT (collision test)     - enable
 	 */
 	SW_WRITE_REG(INCA_IP_Switch_MDIO_ACC, 0xc0a09000);

 	/* MDIO_ACC:
 	 *	RA (Request/Ack)  0x01 (Request)
 	 *	RW (Read/Write)	  0x01 (Write)
 	 *	PHY_ADDR	  0x06 (LAN)
 	 *	REG_ADDR	  0x00 (PHY_BCR: basic control register)
 	 *	PHY_DATA	  0x8000
 	 *		      Reset		      - software reset
 	 *		      LB (loop back)	      - normal
 	 *		      SS (speed select)	      - 10 Mbit/s
 	 *		      ANE (auto neg. enable)  - enable
 	 *		      PD (power down)	      - normal
 	 *		      ISO (isolate)	      - normal
 	 *		      RAN (restart auto neg.) - normal
 	 *		      DM (duplex mode)	      - half duplex
 	 *		      CT (collision test)     - enable
 	 */
 	SW_WRITE_REG(INCA_IP_Switch_MDIO_ACC, 0xc0c09000);

 #endif

 	/* Make sure the CPU port is disabled for now. We
 	 * don't want packets to get stacked for us until
 	 * we enable DMA and are prepared to receive them.
 	 */
 	SW_WRITE_REG(INCA_IP_Switch_ST_PT,0xf);

 	SW_READ_REG(INCA_IP_Switch_ARL_CTL, regValue);

 	/* CRC GEN is enabled.
 	 */
 	regValue |= 0x00000200;
 	SW_WRITE_REG(INCA_IP_Switch_ARL_CTL, regValue);

 	/* ADD TAG is disabled.
 	 */
 	SW_READ_REG(INCA_IP_Switch_PMAC_HD_CTL, regValue);
 	regValue &= ~0x00000002;
 	SW_WRITE_REG(INCA_IP_Switch_PMAC_HD_CTL, regValue);
 }


 static void inca_dma_init(void)
 {
 	/* Switch off all DMA channels.
 	 */
 	DMA_WRITE_REG(INCA_IP_DMA_DMA_RXCCR0, INCA_IP_DMA_DMA_RXCCR0_OFF);
 	DMA_WRITE_REG(INCA_IP_DMA_DMA_RXCCR1, INCA_IP_DMA_DMA_RXCCR1_OFF);

 	DMA_WRITE_REG(INCA_IP_DMA_DMA_TXCCR0, INCA_IP_DMA_DMA_RXCCR0_OFF);
 	DMA_WRITE_REG(INCA_IP_DMA_DMA_TXCCR1, INCA_IP_DMA_DMA_TXCCR1_OFF);
 	DMA_WRITE_REG(INCA_IP_DMA_DMA_TXCCR2, INCA_IP_DMA_DMA_TXCCR2_OFF);

 	/* Setup TX channel polling time.
 	 */
 	DMA_WRITE_REG(INCA_IP_DMA_DMA_TXPOLL, INCA_DMA_TX_POLLING_TIME);

 	/* Setup RX channel polling time.
 	 */
 	DMA_WRITE_REG(INCA_IP_DMA_DMA_RXPOLL, INCA_DMA_RX_POLLING_TIME);

 	/* ERRATA: write reset value into the DMA RX IMR register.
 	 */
 	DMA_WRITE_REG(INCA_IP_DMA_DMA_RXIMR, 0xFFFFFFFF);

 	/* Just in case: disable all transmit interrupts also.
 	 */
 	DMA_WRITE_REG(INCA_IP_DMA_DMA_TXIMR, 0xFFFFFFFF);

 	DMA_WRITE_REG(INCA_IP_DMA_DMA_TXISR, 0xFFFFFFFF);
 	DMA_WRITE_REG(INCA_IP_DMA_DMA_RXISR, 0xFFFFFFFF);
 }

 #if defined(CONFIG_INCA_IP_SWITCH_AMDIX)
 static int inca_amdix(void)
 {
 	u32 phyReg1 = 0;
 	u32 phyReg4 = 0;
 	u32 phyReg5 = 0;
 	u32 phyReg6 = 0;
 	u32 phyReg31 = 0;
 	u32 regEphy = 0;
 	int mdi_flag;
 	int retries;

 	/* Setup GPIO pins.
 	 */
 	*INCA_IP_AUTO_MDIX_LAN_PORTS_DIR    |= (1 << INCA_IP_AUTO_MDIX_LAN_GPIO_PIN_RXTX);
 	*INCA_IP_AUTO_MDIX_LAN_PORTS_ALTSEL |= (1 << INCA_IP_AUTO_MDIX_LAN_GPIO_PIN_RXTX);

 #if 0
 	/* Wait for signal.
 	 */
 	retries = WAIT_SIGNAL_RETRIES;
 	while (--retries) {
 		SW_WRITE_REG(INCA_IP_Switch_MDIO_ACC,
 				(0x1 << 31) |	/* RA		*/
 				(0x0 << 30) |	/* Read		*/
 				(0x6 << 21) |	/* LAN		*/
 				(17  << 16));	/* PHY_MCSR	*/
 		do {
 			SW_READ_REG(INCA_IP_Switch_MDIO_ACC, phyReg1);
 		} while (phyReg1 & (1 << 31));

 		if (phyReg1 & (1 << 1)) {
 			/* Signal detected */
 			break;
 		}
 	}

 	if (!retries)
 		goto Fail;
 #endif

 	/* Set MDI mode.
 	 */
 	*INCA_IP_AUTO_MDIX_LAN_PORTS_OUT &= ~(1 << INCA_IP_AUTO_MDIX_LAN_GPIO_PIN_RXTX);
 	mdi_flag = 1;

 	/* Wait for link.
 	 */
 	retries = WAIT_LINK_RETRIES;
 	while (--retries) {
 		udelay(LINK_RETRY_DELAY * 1000);
 		SW_WRITE_REG(INCA_IP_Switch_MDIO_ACC,
 				(0x1 << 31) |	/* RA		*/
 				(0x0 << 30) |	/* Read		*/
 				(0x6 << 21) |	/* LAN		*/
 				(1   << 16));	/* PHY_BSR	*/
 		do {
 			SW_READ_REG(INCA_IP_Switch_MDIO_ACC, phyReg1);
 		} while (phyReg1 & (1 << 31));

 		if (phyReg1 & (1 << 2)) {
 			/* Link is up */
 			break;
 		} else if (mdi_flag) {
 			/* Set MDIX mode */
 			*INCA_IP_AUTO_MDIX_LAN_PORTS_OUT |= (1 << INCA_IP_AUTO_MDIX_LAN_GPIO_PIN_RXTX);
 			mdi_flag = 0;
 		} else {
 			/* Set MDI mode */
 			*INCA_IP_AUTO_MDIX_LAN_PORTS_OUT &= ~(1 << INCA_IP_AUTO_MDIX_LAN_GPIO_PIN_RXTX);
 			mdi_flag = 1;
 		}
 	}

 	if (!retries) {
 		goto Fail;
 	} else {
 		SW_WRITE_REG(INCA_IP_Switch_MDIO_ACC,
 				(0x1 << 31) |	/* RA		*/
 				(0x0 << 30) |	/* Read		*/
 				(0x6 << 21) |	/* LAN		*/
 				(1   << 16));	/* PHY_BSR	*/
 		do {
 			SW_READ_REG(INCA_IP_Switch_MDIO_ACC, phyReg1);
 		} while (phyReg1 & (1 << 31));

 		/* Auto-negotiation / Parallel detection complete
 		 */
 		if (phyReg1 & (1 << 5)) {
 			SW_WRITE_REG(INCA_IP_Switch_MDIO_ACC,
 				(0x1 << 31) |	/* RA		*/
 				(0x0 << 30) |	/* Read		*/
 				(0x6 << 21) |	/* LAN		*/
 				(31  << 16));	/* PHY_SCSR	*/
 			do {
 				SW_READ_REG(INCA_IP_Switch_MDIO_ACC, phyReg31);
 			} while (phyReg31 & (1 << 31));

 			switch ((phyReg31 >> 2) & 0x7) {
 			case INCA_SWITCH_PHY_SPEED_10H:
 				/* 10Base-T Half-duplex */
 				regEphy = 0;
 				break;
 			case INCA_SWITCH_PHY_SPEED_10F:
 				/* 10Base-T Full-duplex */
 				regEphy = INCA_IP_Switch_EPHY_DL;
 				break;
 			case INCA_SWITCH_PHY_SPEED_100H:
 				/* 100Base-TX Half-duplex */
 				regEphy = INCA_IP_Switch_EPHY_SL;
 				break;
 			case INCA_SWITCH_PHY_SPEED_100F:
 				/* 100Base-TX Full-duplex */
 				regEphy = INCA_IP_Switch_EPHY_SL | INCA_IP_Switch_EPHY_DL;
 				break;
 			}

 			/* In case of Auto-negotiation,
 			 * update the negotiated PAUSE support status
 			 */
 			if (phyReg1 & (1 << 3)) {
 				SW_WRITE_REG(INCA_IP_Switch_MDIO_ACC,
 					(0x1 << 31) |	/* RA		*/
 					(0x0 << 30) |	/* Read		*/
 					(0x6 << 21) |	/* LAN		*/
 					(6   << 16));	/* PHY_ANER	*/
 				do {
 					SW_READ_REG(INCA_IP_Switch_MDIO_ACC, phyReg6);
 				} while (phyReg6 & (1 << 31));

 				/* We are Autoneg-able.
 				 * Is Link partner also able to autoneg?
 				 */
 				if (phyReg6 & (1 << 0)) {
 					SW_WRITE_REG(INCA_IP_Switch_MDIO_ACC,
 						(0x1 << 31) |	/* RA		*/
 						(0x0 << 30) |	/* Read		*/
 						(0x6 << 21) |	/* LAN		*/
 						(4   << 16));	/* PHY_ANAR	*/
 					do {
 						SW_READ_REG(INCA_IP_Switch_MDIO_ACC, phyReg4);
 					} while (phyReg4 & (1 << 31));

 					/* We advertise PAUSE capab.
 					 * Does link partner also advertise it?
 					 */
 					if (phyReg4 & (1 << 10)) {
 						SW_WRITE_REG(INCA_IP_Switch_MDIO_ACC,
 							(0x1 << 31) |	/* RA		*/
 							(0x0 << 30) |	/* Read		*/
 							(0x6 << 21) |	/* LAN		*/
 							(5   << 16));	/* PHY_ANLPAR	*/
 						do {
 							SW_READ_REG(INCA_IP_Switch_MDIO_ACC, phyReg5);
 						} while (phyReg5 & (1 << 31));

 						/* Link partner is PAUSE capab.
 						 */
 						if (phyReg5 & (1 << 10)) {
 							regEphy |= INCA_IP_Switch_EPHY_PL;
 						}
 					}
 				}

 			}

 			/* Link is up */
 			regEphy |= INCA_IP_Switch_EPHY_LL;

 			SW_WRITE_REG(INCA_IP_Switch_EPHY, regEphy);
 		}
 	}

 	return 0;

 Fail:
 	printf("No Link on LAN port\n");
 	return -1;
 }
 #endif /* CONFIG_INCA_IP_SWITCH_AMDIX */

 #endif
	/*
	* INCA-IP internal switch ethernet driver.
	*
	* (C) Copyright 2003-2004
	* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
	*
	* See file CREDITS for list of people who contributed to this
	* project.
	*
	* This program is free software; you can redistribute it and/or
	* modify it under the terms of the GNU General Public License as
	* published by the Free Software Foundation; either version 2 of
	* the License, or (at your option) any later version.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; if not, write to the Free Software
	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	* MA 02111-1307 USA
	*/


	#include <common.h>

	#if (CONFIG_COMMANDS & CFG_CMD_NET) && defined(CONFIG_NET_MULTI) \
	&& defined(CONFIG_INCA_IP_SWITCH)

	#include <malloc.h>
	#include <net.h>
	#include <asm/inca-ip.h>
	#include <asm/addrspace.h>


	#define NUM_RX_DESC PKTBUFSRX
	#define NUM_TX_DESC 3
	#define TOUT_LOOP 1000000


	#define DELAY udelay(10000)
	/* Sometimes the store word instruction hangs while writing to one
	* of the Switch registers. Moving the instruction into a separate
	* function somehow makes the problem go away.
	*/
	static void SWORD(volatile u32 * reg, u32 value)
	{
	*reg = value;
	}

	#define DMA_WRITE_REG(reg, value) ((volatile u32 )reg) = (u32)value;
	#define DMA_READ_REG(reg, value) value = (u32)((volatile u32)reg)
	#define SW_WRITE_REG(reg, value) \
	SWORD(reg, value);\
	DELAY;\
	SWORD(reg, value);

	#define SW_READ_REG(reg, value) \
	value = (u32)((volatile u32)reg);\
	DELAY;\
	value = (u32)((volatile u32)reg);

	#define INCA_DMA_TX_POLLING_TIME 0x07
	#define INCA_DMA_RX_POLLING_TIME 0x07

	#define INCA_DMA_TX_HOLD 0x80000000
	#define INCA_DMA_TX_EOP 0x40000000
	#define INCA_DMA_TX_SOP 0x20000000
	#define INCA_DMA_TX_ICPT 0x10000000
	#define INCA_DMA_TX_IEOP 0x08000000

	#define INCA_DMA_RX_C 0x80000000
	#define INCA_DMA_RX_SOP 0x40000000
	#define INCA_DMA_RX_EOP 0x20000000

	#define INCA_SWITCH_PHY_SPEED_10H 0x1
	#define INCA_SWITCH_PHY_SPEED_10F 0x5
	#define INCA_SWITCH_PHY_SPEED_100H 0x2
	#define INCA_SWITCH_PHY_SPEED_100F 0x6

	/********************** Auto MDIX settings **********************/
	#define INCA_IP_AUTO_MDIX_LAN_PORTS_DIR INCA_IP_Ports_P1_DIR
	#define INCA_IP_AUTO_MDIX_LAN_PORTS_ALTSEL INCA_IP_Ports_P1_ALTSEL
	#define INCA_IP_AUTO_MDIX_LAN_PORTS_OUT INCA_IP_Ports_P1_OUT
	#define INCA_IP_AUTO_MDIX_LAN_GPIO_PIN_RXTX 16

	#define WAIT_SIGNAL_RETRIES 100
	#define WAIT_LINK_RETRIES 100
	#define LINK_RETRY_DELAY 2000 /* ms */
	/********************************************************************/

	typedef struct
	{
	union {
	struct {
	volatile u32 HOLD :1;
	volatile u32 ICpt :1;
	volatile u32 IEop :1;
	volatile u32 offset :3;
	volatile u32 reserved0 :4;
	volatile u32 NFB :22;
	}field;

	volatile u32 word;
	}params;

	volatile u32 nextRxDescPtr;

	volatile u32 RxDataPtr;

	union {
	struct {
	volatile u32 C :1;
	volatile u32 Sop :1;
	volatile u32 Eop :1;
	volatile u32 reserved3 :12;
	volatile u32 NBT :17;
	}field;

	volatile u32 word;
	}status;

	} inca_rx_descriptor_t;


	typedef struct
	{
	union {
	struct {
	volatile u32 HOLD :1;
	volatile u32 Eop :1;
	volatile u32 Sop :1;
	volatile u32 ICpt :1;
	volatile u32 IEop :1;
	volatile u32 reserved0 :5;
	volatile u32 NBA :22;
	}field;

	volatile u32 word;
	}params;

	volatile u32 nextTxDescPtr;

	volatile u32 TxDataPtr;

	volatile u32 C :1;
	volatile u32 reserved3 :31;

	} inca_tx_descriptor_t;


	static inca_rx_descriptor_t rx_ring[NUM_RX_DESC] __attribute__ ((aligned(16)));
	static inca_tx_descriptor_t tx_ring[NUM_TX_DESC] __attribute__ ((aligned(16)));

	static int tx_new, rx_new, tx_hold, rx_hold;
	static int tx_old_hold = -1;
	static int initialized = 0;


	static int inca_switch_init(struct eth_device dev, bd_t bis);
	static int inca_switch_send(struct eth_device dev, volatile void packet, int length);
	static int inca_switch_recv(struct eth_device *dev);
	static void inca_switch_halt(struct eth_device *dev);
	static void inca_init_switch_chip(void);
	static void inca_dma_init(void);
	static int inca_amdix(void);


	int inca_switch_initialize(bd_t * bis)
	{
	struct eth_device *dev;

	#if 0
	printf("Entered inca_switch_initialize()\n");
	#endif

	if (!(dev = (struct eth_device ) malloc (sizeof dev))) {
	printf("Failed to allocate memory\n");
	return 0;
	}
	memset(dev, 0, sizeof(*dev));

	inca_dma_init();

	inca_init_switch_chip();

	#if defined(CONFIG_INCA_IP_SWITCH_AMDIX)
	inca_amdix();
	#endif

	sprintf(dev->name, "INCA-IP Switch");
	dev->init = inca_switch_init;
	dev->halt = inca_switch_halt;
	dev->send = inca_switch_send;
	dev->recv = inca_switch_recv;

	eth_register(dev);

	#if 0
	printf("Leaving inca_switch_initialize()\n");
	#endif

	return 1;
	}


	static int inca_switch_init(struct eth_device dev, bd_t bis)
	{
	int i;
	u32 v, regValue;
	u16 wTmp;

	#if 0
	printf("Entering inca_switch_init()\n");
	#endif

	/* Set MAC address.
	*/
	wTmp = (u16)dev->enetaddr[0];
	regValue = (wTmp << 8) \| dev->enetaddr[1];

	SW_WRITE_REG(INCA_IP_Switch_PMAC_SA1, regValue);

	wTmp = (u16)dev->enetaddr[2];
	regValue = (wTmp << 8) \| dev->enetaddr[3];
	regValue = regValue << 16;
	wTmp = (u16)dev->enetaddr[4];
	regValue \|= (wTmp<<8) \| dev->enetaddr[5];

	SW_WRITE_REG(INCA_IP_Switch_PMAC_SA2, regValue);

	/* Initialize the descriptor rings.
	*/
	for (i = 0; i < NUM_RX_DESC; i++) {
	inca_rx_descriptor_t * rx_desc = KSEG1ADDR(&rx_ring[i]);
	memset(rx_desc, 0, sizeof(rx_ring[i]));

	/* Set maximum size of receive buffer.
	*/
	rx_desc->params.field.NFB = PKTSIZE_ALIGN;

	/* Set the offset of the receive buffer. Zero means
	* that the offset mechanism is not used.
	*/
	rx_desc->params.field.offset = 0;

	/* Check if it is the last descriptor.
	*/
	if (i == (NUM_RX_DESC - 1)) {
	/* Let the last descriptor point to the first
	* one.
	*/
	rx_desc->nextRxDescPtr = KSEG1ADDR((u32)rx_ring);
	} else {
	/* Set the address of the next descriptor.
	*/
	rx_desc->nextRxDescPtr = (u32)KSEG1ADDR(&rx_ring[i+1]);
	}

	rx_desc->RxDataPtr = (u32)KSEG1ADDR(NetRxPackets[i]);
	}

	#if 0
	printf("rx_ring = 0x%08X 0x%08X\n", (u32)rx_ring, (u32)&rx_ring[0]);
	printf("tx_ring = 0x%08X 0x%08X\n", (u32)tx_ring, (u32)&tx_ring[0]);
	#endif

	for (i = 0; i < NUM_TX_DESC; i++) {
	inca_tx_descriptor_t * tx_desc = KSEG1ADDR(&tx_ring[i]);

	memset(tx_desc, 0, sizeof(tx_ring[i]));

	tx_desc->params.word = 0;
	tx_desc->params.field.HOLD = 1;
	tx_desc->C = 1;

	/* Check if it is the last descriptor.
	*/
	if (i == (NUM_TX_DESC - 1)) {
	/* Let the last descriptor point to the
	* first one.
	*/
	tx_desc->nextTxDescPtr = KSEG1ADDR((u32)tx_ring);
	} else {
	/* Set the address of the next descriptor.
	*/
	tx_desc->nextTxDescPtr = (u32)KSEG1ADDR(&tx_ring[i+1]);
	}
	}

	/* Initialize RxDMA.
	*/
	DMA_READ_REG(INCA_IP_DMA_DMA_RXISR, v);
	#if 0
	printf("RX status = 0x%08X\n", v);
	#endif

	/* Writing to the FRDA of CHANNEL.
	*/
	DMA_WRITE_REG(INCA_IP_DMA_DMA_RXFRDA0, (u32)rx_ring);

	/* Writing to the COMMAND REG.
	*/
	DMA_WRITE_REG(INCA_IP_DMA_DMA_RXCCR0, INCA_IP_DMA_DMA_RXCCR0_INIT);

	/* Initialize TxDMA.
	*/
	DMA_READ_REG(INCA_IP_DMA_DMA_TXISR, v);
	#if 0
	printf("TX status = 0x%08X\n", v);
	#endif

	/* Writing to the FRDA of CHANNEL.
	*/
	DMA_WRITE_REG(INCA_IP_DMA_DMA_TXFRDA0, (u32)tx_ring);

	tx_new = rx_new = 0;

	tx_hold = NUM_TX_DESC - 1;
	rx_hold = NUM_RX_DESC - 1;

	#if 0
	rx_ring[rx_hold].params.field.HOLD = 1;
	#endif
	/* enable spanning tree forwarding, enable the CPU port */
	/* ST_PT:
	* CPS (CPU port status) 0x3 (forwarding)
	* LPS (LAN port status) 0x3 (forwarding)
	* PPS (PC port status) 0x3 (forwarding)
	*/
	SW_WRITE_REG(INCA_IP_Switch_ST_PT,0x3f);

	#if 0
	printf("Leaving inca_switch_init()\n");
	#endif

	return 0;
	}


	static int inca_switch_send(struct eth_device dev, volatile void packet, int length)
	{
	int i;
	int res = -1;
	u32 command;
	u32 regValue;
	inca_tx_descriptor_t * tx_desc = KSEG1ADDR(&tx_ring[tx_new]);

	#if 0
	printf("Entered inca_switch_send()\n");
	#endif

	if (length <= 0) {
	printf ("%s: bad packet size: %d\n", dev->name, length);
	goto Done;
	}

	for(i = 0; tx_desc->C == 0; i++) {
	if (i >= TOUT_LOOP) {
	printf("%s: tx error buffer not ready\n", dev->name);
	goto Done;
	}
	}

	if (tx_old_hold >= 0) {
	KSEG1ADDR(&tx_ring[tx_old_hold])->params.field.HOLD = 1;
	}
	tx_old_hold = tx_hold;

	tx_desc->params.word =
	(INCA_DMA_TX_SOP \| INCA_DMA_TX_EOP \| INCA_DMA_TX_HOLD);

	tx_desc->C = 0;
	tx_desc->TxDataPtr = (u32)packet;
	tx_desc->params.field.NBA = length;

	KSEG1ADDR(&tx_ring[tx_hold])->params.field.HOLD = 0;

	tx_hold = tx_new;
	tx_new = (tx_new + 1) % NUM_TX_DESC;


	if (! initialized) {
	command = INCA_IP_DMA_DMA_TXCCR0_INIT;
	initialized = 1;
	} else {
	command = INCA_IP_DMA_DMA_TXCCR0_HR;
	}

	DMA_READ_REG(INCA_IP_DMA_DMA_TXCCR0, regValue);
	regValue \|= command;
	#if 0
	printf("regValue = 0x%x\n", regValue);
	#endif
	DMA_WRITE_REG(INCA_IP_DMA_DMA_TXCCR0, regValue);

	#if 1
	for(i = 0; KSEG1ADDR(&tx_ring[tx_hold])->C == 0; i++) {
	if (i >= TOUT_LOOP) {
	printf("%s: tx buffer not ready\n", dev->name);
	goto Done;
	}
	}
	#endif
	res = length;
	Done:
	#if 0
	printf("Leaving inca_switch_send()\n");
	#endif
	return res;
	}


	static int inca_switch_recv(struct eth_device *dev)
	{
	int length = 0;
	inca_rx_descriptor_t * rx_desc;

	#if 0
	printf("Entered inca_switch_recv()\n");
	#endif

	for (;;) {
	rx_desc = KSEG1ADDR(&rx_ring[rx_new]);

	if (rx_desc->status.field.C == 0) {
	break;
	}

	#if 0
	rx_ring[rx_new].params.field.HOLD = 1;
	#endif

	if (! rx_desc->status.field.Eop) {
	printf("Partly received packet!!!\n");
	break;
	}

	length = rx_desc->status.field.NBT;
	rx_desc->status.word &=
	~(INCA_DMA_RX_EOP \| INCA_DMA_RX_SOP \| INCA_DMA_RX_C);
	#if 0
	{
	int i;
	for (i=0;i<length - 4;i++) {
	if (i % 16 == 0) printf("\n%04x: ", i);
	printf("%02X ", NetRxPackets[rx_new][i]);
	}
	printf("\n");
	}
	#endif

	if (length) {
	#if 0
	printf("Received %d bytes\n", length);
	#endif
	NetReceive((void*)KSEG1ADDR(NetRxPackets[rx_new]), length - 4);
	} else {
	#if 1
	printf("Zero length!!!\n");
	#endif
	}


	KSEG1ADDR(&rx_ring[rx_hold])->params.field.HOLD = 0;

	rx_hold = rx_new;

	rx_new = (rx_new + 1) % NUM_RX_DESC;
	}

	#if 0
	printf("Leaving inca_switch_recv()\n");
	#endif

	return length;
	}


	static void inca_switch_halt(struct eth_device *dev)
	{
	#if 0
	printf("Entered inca_switch_halt()\n");
	#endif

	#if 1
	initialized = 0;
	#endif
	#if 1
	/* Disable forwarding to the CPU port.
	*/
	SW_WRITE_REG(INCA_IP_Switch_ST_PT,0xf);

	/* Close RxDMA channel.
	*/
	DMA_WRITE_REG(INCA_IP_DMA_DMA_RXCCR0, INCA_IP_DMA_DMA_RXCCR0_OFF);

	/* Close TxDMA channel.
	*/
	DMA_WRITE_REG(INCA_IP_DMA_DMA_TXCCR0, INCA_IP_DMA_DMA_TXCCR0_OFF);


	#endif
	#if 0
	printf("Leaving inca_switch_halt()\n");
	#endif
	}


	static void inca_init_switch_chip(void)
	{
	u32 regValue;

	/* To workaround a problem with collision counter
	* (see Errata sheet).
	*/
	SW_WRITE_REG(INCA_IP_Switch_PC_TX_CTL, 0x00000001);
	SW_WRITE_REG(INCA_IP_Switch_LAN_TX_CTL, 0x00000001);

	#if 1
	/* init MDIO configuration:
	* MDS (Poll speed): 0x01 (4ms)
	* PHY_LAN_ADDR: 0x06
	* PHY_PC_ADDR: 0x05
	* UEP (Use External PHY): 0x00 (Internal PHY is used)
	* PS (Port Select): 0x00 (PT/UMM for LAN)
	* PT (PHY Test): 0x00 (no test mode)
	* UMM (Use MDIO Mode): 0x00 (state machine is disabled)
	*/
	SW_WRITE_REG(INCA_IP_Switch_MDIO_CFG, 0x4c50);

	/* init PHY:
	* SL (Auto Neg. Speed for LAN)
	* SP (Auto Neg. Speed for PC)
	* LL (Link Status for LAN)
	* LP (Link Status for PC)
	* DL (Duplex Status for LAN)
	* DP (Duplex Status for PC)
	* PL (Auto Neg. Pause Status for LAN)
	* PP (Auto Neg. Pause Status for PC)
	*/
	SW_WRITE_REG (INCA_IP_Switch_EPHY, 0xff);

	/* MDIO_ACC:
	* RA (Request/Ack) 0x01 (Request)
	* RW (Read/Write) 0x01 (Write)
	* PHY_ADDR 0x05 (PC)
	* REG_ADDR 0x00 (PHY_BCR: basic control register)
	* PHY_DATA 0x8000
	* Reset - software reset
	* LB (loop back) - normal
	* SS (speed select) - 10 Mbit/s
	* ANE (auto neg. enable) - enable
	* PD (power down) - normal
	* ISO (isolate) - normal
	* RAN (restart auto neg.) - normal
	* DM (duplex mode) - half duplex
	* CT (collision test) - enable
	*/
	SW_WRITE_REG(INCA_IP_Switch_MDIO_ACC, 0xc0a09000);

	/* MDIO_ACC:
	* RA (Request/Ack) 0x01 (Request)
	* RW (Read/Write) 0x01 (Write)
	* PHY_ADDR 0x06 (LAN)
	* REG_ADDR 0x00 (PHY_BCR: basic control register)
	* PHY_DATA 0x8000
	* Reset - software reset
	* LB (loop back) - normal
	* SS (speed select) - 10 Mbit/s
	* ANE (auto neg. enable) - enable
	* PD (power down) - normal
	* ISO (isolate) - normal
	* RAN (restart auto neg.) - normal
	* DM (duplex mode) - half duplex
	* CT (collision test) - enable
	*/
	SW_WRITE_REG(INCA_IP_Switch_MDIO_ACC, 0xc0c09000);

	#endif

	/* Make sure the CPU port is disabled for now. We
	* don't want packets to get stacked for us until
	* we enable DMA and are prepared to receive them.
	*/
	SW_WRITE_REG(INCA_IP_Switch_ST_PT,0xf);

	SW_READ_REG(INCA_IP_Switch_ARL_CTL, regValue);

	/* CRC GEN is enabled.
	*/
	regValue \|= 0x00000200;
	SW_WRITE_REG(INCA_IP_Switch_ARL_CTL, regValue);

	/* ADD TAG is disabled.
	*/
	SW_READ_REG(INCA_IP_Switch_PMAC_HD_CTL, regValue);
	regValue &= ~0x00000002;
	SW_WRITE_REG(INCA_IP_Switch_PMAC_HD_CTL, regValue);
	}


	static void inca_dma_init(void)
	{
	/* Switch off all DMA channels.
	*/
	DMA_WRITE_REG(INCA_IP_DMA_DMA_RXCCR0, INCA_IP_DMA_DMA_RXCCR0_OFF);
	DMA_WRITE_REG(INCA_IP_DMA_DMA_RXCCR1, INCA_IP_DMA_DMA_RXCCR1_OFF);

	DMA_WRITE_REG(INCA_IP_DMA_DMA_TXCCR0, INCA_IP_DMA_DMA_RXCCR0_OFF);
	DMA_WRITE_REG(INCA_IP_DMA_DMA_TXCCR1, INCA_IP_DMA_DMA_TXCCR1_OFF);
	DMA_WRITE_REG(INCA_IP_DMA_DMA_TXCCR2, INCA_IP_DMA_DMA_TXCCR2_OFF);

	/* Setup TX channel polling time.
	*/
	DMA_WRITE_REG(INCA_IP_DMA_DMA_TXPOLL, INCA_DMA_TX_POLLING_TIME);

	/* Setup RX channel polling time.
	*/
	DMA_WRITE_REG(INCA_IP_DMA_DMA_RXPOLL, INCA_DMA_RX_POLLING_TIME);

	/* ERRATA: write reset value into the DMA RX IMR register.
	*/
	DMA_WRITE_REG(INCA_IP_DMA_DMA_RXIMR, 0xFFFFFFFF);

	/* Just in case: disable all transmit interrupts also.
	*/
	DMA_WRITE_REG(INCA_IP_DMA_DMA_TXIMR, 0xFFFFFFFF);

	DMA_WRITE_REG(INCA_IP_DMA_DMA_TXISR, 0xFFFFFFFF);
	DMA_WRITE_REG(INCA_IP_DMA_DMA_RXISR, 0xFFFFFFFF);
	}

	#if defined(CONFIG_INCA_IP_SWITCH_AMDIX)
	static int inca_amdix(void)
	{
	u32 phyReg1 = 0;
	u32 phyReg4 = 0;
	u32 phyReg5 = 0;
	u32 phyReg6 = 0;
	u32 phyReg31 = 0;
	u32 regEphy = 0;
	int mdi_flag;
	int retries;

	/* Setup GPIO pins.
	*/
	*INCA_IP_AUTO_MDIX_LAN_PORTS_DIR \|= (1 << INCA_IP_AUTO_MDIX_LAN_GPIO_PIN_RXTX);
	*INCA_IP_AUTO_MDIX_LAN_PORTS_ALTSEL \|= (1 << INCA_IP_AUTO_MDIX_LAN_GPIO_PIN_RXTX);

	#if 0
	/* Wait for signal.
	*/
	retries = WAIT_SIGNAL_RETRIES;
	while (--retries) {
	SW_WRITE_REG(INCA_IP_Switch_MDIO_ACC,
	(0x1 << 31) \| /* RA */
	(0x0 << 30) \| /* Read */
	(0x6 << 21) \| /* LAN */
	(17 << 16)); /* PHY_MCSR */
	do {
	SW_READ_REG(INCA_IP_Switch_MDIO_ACC, phyReg1);
	} while (phyReg1 & (1 << 31));

	if (phyReg1 & (1 << 1)) {
	/* Signal detected */
	break;
	}
	}

	if (!retries)
	goto Fail;
	#endif

	/* Set MDI mode.
	*/
	*INCA_IP_AUTO_MDIX_LAN_PORTS_OUT &= ~(1 << INCA_IP_AUTO_MDIX_LAN_GPIO_PIN_RXTX);
	mdi_flag = 1;

	/* Wait for link.
	*/
	retries = WAIT_LINK_RETRIES;
	while (--retries) {
	udelay(LINK_RETRY_DELAY * 1000);
	SW_WRITE_REG(INCA_IP_Switch_MDIO_ACC,
	(0x1 << 31) \| /* RA */
	(0x0 << 30) \| /* Read */
	(0x6 << 21) \| /* LAN */
	(1 << 16)); /* PHY_BSR */
	do {
	SW_READ_REG(INCA_IP_Switch_MDIO_ACC, phyReg1);
	} while (phyReg1 & (1 << 31));

	if (phyReg1 & (1 << 2)) {
	/* Link is up */
	break;
	} else if (mdi_flag) {
	/* Set MDIX mode */
	*INCA_IP_AUTO_MDIX_LAN_PORTS_OUT \|= (1 << INCA_IP_AUTO_MDIX_LAN_GPIO_PIN_RXTX);
	mdi_flag = 0;
	} else {
	/* Set MDI mode */
	*INCA_IP_AUTO_MDIX_LAN_PORTS_OUT &= ~(1 << INCA_IP_AUTO_MDIX_LAN_GPIO_PIN_RXTX);
	mdi_flag = 1;
	}
	}

	if (!retries) {
	goto Fail;
	} else {
	SW_WRITE_REG(INCA_IP_Switch_MDIO_ACC,
	(0x1 << 31) \| /* RA */
	(0x0 << 30) \| /* Read */
	(0x6 << 21) \| /* LAN */
	(1 << 16)); /* PHY_BSR */
	do {
	SW_READ_REG(INCA_IP_Switch_MDIO_ACC, phyReg1);
	} while (phyReg1 & (1 << 31));

	/* Auto-negotiation / Parallel detection complete
	*/
	if (phyReg1 & (1 << 5)) {
	SW_WRITE_REG(INCA_IP_Switch_MDIO_ACC,
	(0x1 << 31) \| /* RA */
	(0x0 << 30) \| /* Read */
	(0x6 << 21) \| /* LAN */
	(31 << 16)); /* PHY_SCSR */
	do {
	SW_READ_REG(INCA_IP_Switch_MDIO_ACC, phyReg31);
	} while (phyReg31 & (1 << 31));

	switch ((phyReg31 >> 2) & 0x7) {
	case INCA_SWITCH_PHY_SPEED_10H:
	/* 10Base-T Half-duplex */
	regEphy = 0;
	break;
	case INCA_SWITCH_PHY_SPEED_10F:
	/* 10Base-T Full-duplex */
	regEphy = INCA_IP_Switch_EPHY_DL;
	break;
	case INCA_SWITCH_PHY_SPEED_100H:
	/* 100Base-TX Half-duplex */
	regEphy = INCA_IP_Switch_EPHY_SL;
	break;
	case INCA_SWITCH_PHY_SPEED_100F:
	/* 100Base-TX Full-duplex */
	regEphy = INCA_IP_Switch_EPHY_SL \| INCA_IP_Switch_EPHY_DL;
	break;
	}

	/* In case of Auto-negotiation,
	* update the negotiated PAUSE support status
	*/
	if (phyReg1 & (1 << 3)) {
	SW_WRITE_REG(INCA_IP_Switch_MDIO_ACC,
	(0x1 << 31) \| /* RA */
	(0x0 << 30) \| /* Read */
	(0x6 << 21) \| /* LAN */
	(6 << 16)); /* PHY_ANER */
	do {
	SW_READ_REG(INCA_IP_Switch_MDIO_ACC, phyReg6);
	} while (phyReg6 & (1 << 31));

	/* We are Autoneg-able.
	* Is Link partner also able to autoneg?
	*/
	if (phyReg6 & (1 << 0)) {
	SW_WRITE_REG(INCA_IP_Switch_MDIO_ACC,
	(0x1 << 31) \| /* RA */
	(0x0 << 30) \| /* Read */
	(0x6 << 21) \| /* LAN */
	(4 << 16)); /* PHY_ANAR */
	do {
	SW_READ_REG(INCA_IP_Switch_MDIO_ACC, phyReg4);
	} while (phyReg4 & (1 << 31));

	/* We advertise PAUSE capab.
	* Does link partner also advertise it?
	*/
	if (phyReg4 & (1 << 10)) {
	SW_WRITE_REG(INCA_IP_Switch_MDIO_ACC,
	(0x1 << 31) \| /* RA */
	(0x0 << 30) \| /* Read */
	(0x6 << 21) \| /* LAN */
	(5 << 16)); /* PHY_ANLPAR */
	do {
	SW_READ_REG(INCA_IP_Switch_MDIO_ACC, phyReg5);
	} while (phyReg5 & (1 << 31));

	/* Link partner is PAUSE capab.
	*/
	if (phyReg5 & (1 << 10)) {
	regEphy \|= INCA_IP_Switch_EPHY_PL;
	}
	}
	}

	}

	/* Link is up */
	regEphy \|= INCA_IP_Switch_EPHY_LL;

	SW_WRITE_REG(INCA_IP_Switch_EPHY, regEphy);
	}
	}

	return 0;

	Fail:
	printf("No Link on LAN port\n");
	return -1;
	}
	#endif /* CONFIG_INCA_IP_SWITCH_AMDIX */

	#endif