| /******************************************************************************* |
| |
| |
| Copyright(c) 1999 - 2002 Intel Corporation. All rights reserved. |
| |
| This program is free software; you can redistribute it and/or modify it |
| under the terms of the GNU General Public License as published by the Free |
| Software Foundation; either version 2 of the License, or (at your option) |
| any later version. |
| |
| This program is distributed in the hope that it will be useful, but WITHOUT |
| ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| more details. |
| |
| You should have received a copy of the GNU General Public License along with |
| this program; if not, write to the Free Software Foundation, Inc., 59 |
| Temple Place - Suite 330, Boston, MA 02111-1307, USA. |
| |
| The full GNU General Public License is included in this distribution in the |
| file called LICENSE. |
| |
| Contact Information: |
| Linux NICS <linux.nics@intel.com> |
| Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 |
| |
| *******************************************************************************/ |
| |
| /* e1000_hw.h |
| * Structures, enums, and macros for the MAC |
| */ |
| |
| #ifndef _E1000_HW_H_ |
| #define _E1000_HW_H_ |
| |
| #include <common.h> |
| #include <malloc.h> |
| #include <net.h> |
| #include <asm/io.h> |
| #include <pci.h> |
| |
| #define E1000_ERR(args...) printf("e1000: " args) |
| |
| #ifdef E1000_DEBUG |
| #define E1000_DBG(args...) printf("e1000: " args) |
| #define DEBUGOUT(fmt,args...) printf(fmt ,##args) |
| #define DEBUGFUNC() printf("%s\n", __FUNCTION__); |
| #else |
| #define E1000_DBG(args...) |
| #define DEBUGFUNC() |
| #define DEBUGOUT(fmt,args...) |
| #endif |
| |
| /* Forward declarations of structures used by the shared code */ |
| struct e1000_hw; |
| struct e1000_hw_stats; |
| |
| typedef enum { |
| FALSE = 0, |
| TRUE = 1 |
| } boolean_t; |
| |
| /* Enumerated types specific to the e1000 hardware */ |
| /* Media Access Controlers */ |
| typedef enum { |
| e1000_undefined = 0, |
| e1000_82542_rev2_0, |
| e1000_82542_rev2_1, |
| e1000_82543, |
| e1000_82544, |
| e1000_82540, |
| e1000_82545, |
| e1000_82546, |
| e1000_num_macs |
| } e1000_mac_type; |
| |
| /* Media Types */ |
| typedef enum { |
| e1000_media_type_copper = 0, |
| e1000_media_type_fiber = 1, |
| e1000_num_media_types |
| } e1000_media_type; |
| |
| typedef enum { |
| e1000_10_half = 0, |
| e1000_10_full = 1, |
| e1000_100_half = 2, |
| e1000_100_full = 3 |
| } e1000_speed_duplex_type; |
| |
| typedef enum { |
| e1000_lan_a = 0, |
| e1000_lan_b = 1 |
| } e1000_lan_loc; |
| |
| /* Flow Control Settings */ |
| typedef enum { |
| e1000_fc_none = 0, |
| e1000_fc_rx_pause = 1, |
| e1000_fc_tx_pause = 2, |
| e1000_fc_full = 3, |
| e1000_fc_default = 0xFF |
| } e1000_fc_type; |
| |
| /* PCI bus types */ |
| typedef enum { |
| e1000_bus_type_unknown = 0, |
| e1000_bus_type_pci, |
| e1000_bus_type_pcix |
| } e1000_bus_type; |
| |
| /* PCI bus speeds */ |
| typedef enum { |
| e1000_bus_speed_unknown = 0, |
| e1000_bus_speed_33, |
| e1000_bus_speed_66, |
| e1000_bus_speed_100, |
| e1000_bus_speed_133, |
| e1000_bus_speed_reserved |
| } e1000_bus_speed; |
| |
| /* PCI bus widths */ |
| typedef enum { |
| e1000_bus_width_unknown = 0, |
| e1000_bus_width_32, |
| e1000_bus_width_64 |
| } e1000_bus_width; |
| |
| /* PHY status info structure and supporting enums */ |
| typedef enum { |
| e1000_cable_length_50 = 0, |
| e1000_cable_length_50_80, |
| e1000_cable_length_80_110, |
| e1000_cable_length_110_140, |
| e1000_cable_length_140, |
| e1000_cable_length_undefined = 0xFF |
| } e1000_cable_length; |
| |
| typedef enum { |
| e1000_10bt_ext_dist_enable_normal = 0, |
| e1000_10bt_ext_dist_enable_lower, |
| e1000_10bt_ext_dist_enable_undefined = 0xFF |
| } e1000_10bt_ext_dist_enable; |
| |
| typedef enum { |
| e1000_rev_polarity_normal = 0, |
| e1000_rev_polarity_reversed, |
| e1000_rev_polarity_undefined = 0xFF |
| } e1000_rev_polarity; |
| |
| typedef enum { |
| e1000_polarity_reversal_enabled = 0, |
| e1000_polarity_reversal_disabled, |
| e1000_polarity_reversal_undefined = 0xFF |
| } e1000_polarity_reversal; |
| |
| typedef enum { |
| e1000_auto_x_mode_manual_mdi = 0, |
| e1000_auto_x_mode_manual_mdix, |
| e1000_auto_x_mode_auto1, |
| e1000_auto_x_mode_auto2, |
| e1000_auto_x_mode_undefined = 0xFF |
| } e1000_auto_x_mode; |
| |
| typedef enum { |
| e1000_1000t_rx_status_not_ok = 0, |
| e1000_1000t_rx_status_ok, |
| e1000_1000t_rx_status_undefined = 0xFF |
| } e1000_1000t_rx_status; |
| |
| struct e1000_phy_info { |
| e1000_cable_length cable_length; |
| e1000_10bt_ext_dist_enable extended_10bt_distance; |
| e1000_rev_polarity cable_polarity; |
| e1000_polarity_reversal polarity_correction; |
| e1000_auto_x_mode mdix_mode; |
| e1000_1000t_rx_status local_rx; |
| e1000_1000t_rx_status remote_rx; |
| }; |
| |
| struct e1000_phy_stats { |
| uint32_t idle_errors; |
| uint32_t receive_errors; |
| }; |
| |
| /* Error Codes */ |
| #define E1000_SUCCESS 0 |
| #define E1000_ERR_EEPROM 1 |
| #define E1000_ERR_PHY 2 |
| #define E1000_ERR_CONFIG 3 |
| #define E1000_ERR_PARAM 4 |
| #define E1000_ERR_MAC_TYPE 5 |
| #define E1000_ERR_NOLINK 6 |
| #define E1000_ERR_TIMEOUT 7 |
| |
| /* PCI Device IDs */ |
| #define E1000_DEV_ID_82542 0x1000 |
| #define E1000_DEV_ID_82543GC_FIBER 0x1001 |
| #define E1000_DEV_ID_82543GC_COPPER 0x1004 |
| #define E1000_DEV_ID_82544EI_COPPER 0x1008 |
| #define E1000_DEV_ID_82544EI_FIBER 0x1009 |
| #define E1000_DEV_ID_82544GC_COPPER 0x100C |
| #define E1000_DEV_ID_82544GC_LOM 0x100D |
| #define E1000_DEV_ID_82540EM 0x100E |
| #define E1000_DEV_ID_82540EM_LOM 0x1015 |
| #define E1000_DEV_ID_82545EM_COPPER 0x100F |
| #define E1000_DEV_ID_82545EM_FIBER 0x1011 |
| #define E1000_DEV_ID_82546EB_COPPER 0x1010 |
| #define E1000_DEV_ID_82546EB_FIBER 0x1012 |
| #define NUM_DEV_IDS 13 |
| |
| #define NODE_ADDRESS_SIZE 6 |
| #define ETH_LENGTH_OF_ADDRESS 6 |
| |
| /* MAC decode size is 128K - This is the size of BAR0 */ |
| #define MAC_DECODE_SIZE (128 * 1024) |
| |
| #define E1000_82542_2_0_REV_ID 2 |
| #define E1000_82542_2_1_REV_ID 3 |
| |
| #define SPEED_10 10 |
| #define SPEED_100 100 |
| #define SPEED_1000 1000 |
| #define HALF_DUPLEX 1 |
| #define FULL_DUPLEX 2 |
| |
| /* The sizes (in bytes) of a ethernet packet */ |
| #define ENET_HEADER_SIZE 14 |
| #define MAXIMUM_ETHERNET_FRAME_SIZE 1518 /* With FCS */ |
| #define MINIMUM_ETHERNET_FRAME_SIZE 64 /* With FCS */ |
| #define ETHERNET_FCS_SIZE 4 |
| #define MAXIMUM_ETHERNET_PACKET_SIZE \ |
| (MAXIMUM_ETHERNET_FRAME_SIZE - ETHERNET_FCS_SIZE) |
| #define MINIMUM_ETHERNET_PACKET_SIZE \ |
| (MINIMUM_ETHERNET_FRAME_SIZE - ETHERNET_FCS_SIZE) |
| #define CRC_LENGTH ETHERNET_FCS_SIZE |
| #define MAX_JUMBO_FRAME_SIZE 0x3F00 |
| |
| /* 802.1q VLAN Packet Sizes */ |
| #define VLAN_TAG_SIZE 4 /* 802.3ac tag (not DMAed) */ |
| |
| /* Ethertype field values */ |
| #define ETHERNET_IEEE_VLAN_TYPE 0x8100 /* 802.3ac packet */ |
| #define ETHERNET_IP_TYPE 0x0800 /* IP packets */ |
| #define ETHERNET_ARP_TYPE 0x0806 /* Address Resolution Protocol (ARP) */ |
| |
| /* Packet Header defines */ |
| #define IP_PROTOCOL_TCP 6 |
| #define IP_PROTOCOL_UDP 0x11 |
| |
| /* This defines the bits that are set in the Interrupt Mask |
| * Set/Read Register. Each bit is documented below: |
| * o RXDMT0 = Receive Descriptor Minimum Threshold hit (ring 0) |
| * o RXSEQ = Receive Sequence Error |
| */ |
| #define POLL_IMS_ENABLE_MASK ( \ |
| E1000_IMS_RXDMT0 | \ |
| E1000_IMS_RXSEQ) |
| |
| /* This defines the bits that are set in the Interrupt Mask |
| * Set/Read Register. Each bit is documented below: |
| * o RXT0 = Receiver Timer Interrupt (ring 0) |
| * o TXDW = Transmit Descriptor Written Back |
| * o RXDMT0 = Receive Descriptor Minimum Threshold hit (ring 0) |
| * o RXSEQ = Receive Sequence Error |
| * o LSC = Link Status Change |
| */ |
| #define IMS_ENABLE_MASK ( \ |
| E1000_IMS_RXT0 | \ |
| E1000_IMS_TXDW | \ |
| E1000_IMS_RXDMT0 | \ |
| E1000_IMS_RXSEQ | \ |
| E1000_IMS_LSC) |
| |
| /* The number of high/low register pairs in the RAR. The RAR (Receive Address |
| * Registers) holds the directed and multicast addresses that we monitor. We |
| * reserve one of these spots for our directed address, allowing us room for |
| * E1000_RAR_ENTRIES - 1 multicast addresses. |
| */ |
| #define E1000_RAR_ENTRIES 16 |
| |
| #define MIN_NUMBER_OF_DESCRIPTORS 8 |
| #define MAX_NUMBER_OF_DESCRIPTORS 0xFFF8 |
| |
| /* Receive Descriptor */ |
| struct e1000_rx_desc { |
| uint64_t buffer_addr; /* Address of the descriptor's data buffer */ |
| uint16_t length; /* Length of data DMAed into data buffer */ |
| uint16_t csum; /* Packet checksum */ |
| uint8_t status; /* Descriptor status */ |
| uint8_t errors; /* Descriptor Errors */ |
| uint16_t special; |
| }; |
| |
| /* Receive Decriptor bit definitions */ |
| #define E1000_RXD_STAT_DD 0x01 /* Descriptor Done */ |
| #define E1000_RXD_STAT_EOP 0x02 /* End of Packet */ |
| #define E1000_RXD_STAT_IXSM 0x04 /* Ignore checksum */ |
| #define E1000_RXD_STAT_VP 0x08 /* IEEE VLAN Packet */ |
| #define E1000_RXD_STAT_TCPCS 0x20 /* TCP xsum calculated */ |
| #define E1000_RXD_STAT_IPCS 0x40 /* IP xsum calculated */ |
| #define E1000_RXD_STAT_PIF 0x80 /* passed in-exact filter */ |
| #define E1000_RXD_ERR_CE 0x01 /* CRC Error */ |
| #define E1000_RXD_ERR_SE 0x02 /* Symbol Error */ |
| #define E1000_RXD_ERR_SEQ 0x04 /* Sequence Error */ |
| #define E1000_RXD_ERR_CXE 0x10 /* Carrier Extension Error */ |
| #define E1000_RXD_ERR_TCPE 0x20 /* TCP/UDP Checksum Error */ |
| #define E1000_RXD_ERR_IPE 0x40 /* IP Checksum Error */ |
| #define E1000_RXD_ERR_RXE 0x80 /* Rx Data Error */ |
| #define E1000_RXD_SPC_VLAN_MASK 0x0FFF /* VLAN ID is in lower 12 bits */ |
| #define E1000_RXD_SPC_PRI_MASK 0xE000 /* Priority is in upper 3 bits */ |
| #define E1000_RXD_SPC_PRI_SHIFT 0x000D /* Priority is in upper 3 of 16 */ |
| #define E1000_RXD_SPC_CFI_MASK 0x1000 /* CFI is bit 12 */ |
| #define E1000_RXD_SPC_CFI_SHIFT 0x000C /* CFI is bit 12 */ |
| |
| /* mask to determine if packets should be dropped due to frame errors */ |
| #define E1000_RXD_ERR_FRAME_ERR_MASK ( \ |
| E1000_RXD_ERR_CE | \ |
| E1000_RXD_ERR_SE | \ |
| E1000_RXD_ERR_SEQ | \ |
| E1000_RXD_ERR_CXE | \ |
| E1000_RXD_ERR_RXE) |
| |
| /* Transmit Descriptor */ |
| struct e1000_tx_desc { |
| uint64_t buffer_addr; /* Address of the descriptor's data buffer */ |
| union { |
| uint32_t data; |
| struct { |
| uint16_t length; /* Data buffer length */ |
| uint8_t cso; /* Checksum offset */ |
| uint8_t cmd; /* Descriptor control */ |
| } flags; |
| } lower; |
| union { |
| uint32_t data; |
| struct { |
| uint8_t status; /* Descriptor status */ |
| uint8_t css; /* Checksum start */ |
| uint16_t special; |
| } fields; |
| } upper; |
| }; |
| |
| /* Transmit Descriptor bit definitions */ |
| #define E1000_TXD_DTYP_D 0x00100000 /* Data Descriptor */ |
| #define E1000_TXD_DTYP_C 0x00000000 /* Context Descriptor */ |
| #define E1000_TXD_POPTS_IXSM 0x01 /* Insert IP checksum */ |
| #define E1000_TXD_POPTS_TXSM 0x02 /* Insert TCP/UDP checksum */ |
| #define E1000_TXD_CMD_EOP 0x01000000 /* End of Packet */ |
| #define E1000_TXD_CMD_IFCS 0x02000000 /* Insert FCS (Ethernet CRC) */ |
| #define E1000_TXD_CMD_IC 0x04000000 /* Insert Checksum */ |
| #define E1000_TXD_CMD_RS 0x08000000 /* Report Status */ |
| #define E1000_TXD_CMD_RPS 0x10000000 /* Report Packet Sent */ |
| #define E1000_TXD_CMD_DEXT 0x20000000 /* Descriptor extension (0 = legacy) */ |
| #define E1000_TXD_CMD_VLE 0x40000000 /* Add VLAN tag */ |
| #define E1000_TXD_CMD_IDE 0x80000000 /* Enable Tidv register */ |
| #define E1000_TXD_STAT_DD 0x00000001 /* Descriptor Done */ |
| #define E1000_TXD_STAT_EC 0x00000002 /* Excess Collisions */ |
| #define E1000_TXD_STAT_LC 0x00000004 /* Late Collisions */ |
| #define E1000_TXD_STAT_TU 0x00000008 /* Transmit underrun */ |
| #define E1000_TXD_CMD_TCP 0x01000000 /* TCP packet */ |
| #define E1000_TXD_CMD_IP 0x02000000 /* IP packet */ |
| #define E1000_TXD_CMD_TSE 0x04000000 /* TCP Seg enable */ |
| #define E1000_TXD_STAT_TC 0x00000004 /* Tx Underrun */ |
| |
| /* Offload Context Descriptor */ |
| struct e1000_context_desc { |
| union { |
| uint32_t ip_config; |
| struct { |
| uint8_t ipcss; /* IP checksum start */ |
| uint8_t ipcso; /* IP checksum offset */ |
| uint16_t ipcse; /* IP checksum end */ |
| } ip_fields; |
| } lower_setup; |
| union { |
| uint32_t tcp_config; |
| struct { |
| uint8_t tucss; /* TCP checksum start */ |
| uint8_t tucso; /* TCP checksum offset */ |
| uint16_t tucse; /* TCP checksum end */ |
| } tcp_fields; |
| } upper_setup; |
| uint32_t cmd_and_length; /* */ |
| union { |
| uint32_t data; |
| struct { |
| uint8_t status; /* Descriptor status */ |
| uint8_t hdr_len; /* Header length */ |
| uint16_t mss; /* Maximum segment size */ |
| } fields; |
| } tcp_seg_setup; |
| }; |
| |
| /* Offload data descriptor */ |
| struct e1000_data_desc { |
| uint64_t buffer_addr; /* Address of the descriptor's buffer address */ |
| union { |
| uint32_t data; |
| struct { |
| uint16_t length; /* Data buffer length */ |
| uint8_t typ_len_ext; /* */ |
| uint8_t cmd; /* */ |
| } flags; |
| } lower; |
| union { |
| uint32_t data; |
| struct { |
| uint8_t status; /* Descriptor status */ |
| uint8_t popts; /* Packet Options */ |
| uint16_t special; /* */ |
| } fields; |
| } upper; |
| }; |
| |
| /* Filters */ |
| #define E1000_NUM_UNICAST 16 /* Unicast filter entries */ |
| #define E1000_MC_TBL_SIZE 128 /* Multicast Filter Table (4096 bits) */ |
| #define E1000_VLAN_FILTER_TBL_SIZE 128 /* VLAN Filter Table (4096 bits) */ |
| |
| /* Receive Address Register */ |
| struct e1000_rar { |
| volatile uint32_t low; /* receive address low */ |
| volatile uint32_t high; /* receive address high */ |
| }; |
| |
| /* The number of entries in the Multicast Table Array (MTA). */ |
| #define E1000_NUM_MTA_REGISTERS 128 |
| |
| /* IPv4 Address Table Entry */ |
| struct e1000_ipv4_at_entry { |
| volatile uint32_t ipv4_addr; /* IP Address (RW) */ |
| volatile uint32_t reserved; |
| }; |
| |
| /* Four wakeup IP addresses are supported */ |
| #define E1000_WAKEUP_IP_ADDRESS_COUNT_MAX 4 |
| #define E1000_IP4AT_SIZE E1000_WAKEUP_IP_ADDRESS_COUNT_MAX |
| #define E1000_IP6AT_SIZE 1 |
| |
| /* IPv6 Address Table Entry */ |
| struct e1000_ipv6_at_entry { |
| volatile uint8_t ipv6_addr[16]; |
| }; |
| |
| /* Flexible Filter Length Table Entry */ |
| struct e1000_fflt_entry { |
| volatile uint32_t length; /* Flexible Filter Length (RW) */ |
| volatile uint32_t reserved; |
| }; |
| |
| /* Flexible Filter Mask Table Entry */ |
| struct e1000_ffmt_entry { |
| volatile uint32_t mask; /* Flexible Filter Mask (RW) */ |
| volatile uint32_t reserved; |
| }; |
| |
| /* Flexible Filter Value Table Entry */ |
| struct e1000_ffvt_entry { |
| volatile uint32_t value; /* Flexible Filter Value (RW) */ |
| volatile uint32_t reserved; |
| }; |
| |
| /* Four Flexible Filters are supported */ |
| #define E1000_FLEXIBLE_FILTER_COUNT_MAX 4 |
| |
| /* Each Flexible Filter is at most 128 (0x80) bytes in length */ |
| #define E1000_FLEXIBLE_FILTER_SIZE_MAX 128 |
| |
| #define E1000_FFLT_SIZE E1000_FLEXIBLE_FILTER_COUNT_MAX |
| #define E1000_FFMT_SIZE E1000_FLEXIBLE_FILTER_SIZE_MAX |
| #define E1000_FFVT_SIZE E1000_FLEXIBLE_FILTER_SIZE_MAX |
| |
| /* Register Set. (82543, 82544) |
| * |
| * Registers are defined to be 32 bits and should be accessed as 32 bit values. |
| * These registers are physically located on the NIC, but are mapped into the |
| * host memory address space. |
| * |
| * RW - register is both readable and writable |
| * RO - register is read only |
| * WO - register is write only |
| * R/clr - register is read only and is cleared when read |
| * A - register array |
| */ |
| #define E1000_CTRL 0x00000 /* Device Control - RW */ |
| #define E1000_STATUS 0x00008 /* Device Status - RO */ |
| #define E1000_EECD 0x00010 /* EEPROM/Flash Control - RW */ |
| #define E1000_EERD 0x00014 /* EEPROM Read - RW */ |
| #define E1000_CTRL_EXT 0x00018 /* Extended Device Control - RW */ |
| #define E1000_MDIC 0x00020 /* MDI Control - RW */ |
| #define E1000_FCAL 0x00028 /* Flow Control Address Low - RW */ |
| #define E1000_FCAH 0x0002C /* Flow Control Address High -RW */ |
| #define E1000_FCT 0x00030 /* Flow Control Type - RW */ |
| #define E1000_VET 0x00038 /* VLAN Ether Type - RW */ |
| #define E1000_ICR 0x000C0 /* Interrupt Cause Read - R/clr */ |
| #define E1000_ITR 0x000C4 /* Interrupt Throttling Rate - RW */ |
| #define E1000_ICS 0x000C8 /* Interrupt Cause Set - WO */ |
| #define E1000_IMS 0x000D0 /* Interrupt Mask Set - RW */ |
| #define E1000_IMC 0x000D8 /* Interrupt Mask Clear - WO */ |
| #define E1000_RCTL 0x00100 /* RX Control - RW */ |
| #define E1000_FCTTV 0x00170 /* Flow Control Transmit Timer Value - RW */ |
| #define E1000_TXCW 0x00178 /* TX Configuration Word - RW */ |
| #define E1000_RXCW 0x00180 /* RX Configuration Word - RO */ |
| #define E1000_TCTL 0x00400 /* TX Control - RW */ |
| #define E1000_TIPG 0x00410 /* TX Inter-packet gap -RW */ |
| #define E1000_TBT 0x00448 /* TX Burst Timer - RW */ |
| #define E1000_AIT 0x00458 /* Adaptive Interframe Spacing Throttle - RW */ |
| #define E1000_LEDCTL 0x00E00 /* LED Control - RW */ |
| #define E1000_PBA 0x01000 /* Packet Buffer Allocation - RW */ |
| #define E1000_FCRTL 0x02160 /* Flow Control Receive Threshold Low - RW */ |
| #define E1000_FCRTH 0x02168 /* Flow Control Receive Threshold High - RW */ |
| #define E1000_RDBAL 0x02800 /* RX Descriptor Base Address Low - RW */ |
| #define E1000_RDBAH 0x02804 /* RX Descriptor Base Address High - RW */ |
| #define E1000_RDLEN 0x02808 /* RX Descriptor Length - RW */ |
| #define E1000_RDH 0x02810 /* RX Descriptor Head - RW */ |
| #define E1000_RDT 0x02818 /* RX Descriptor Tail - RW */ |
| #define E1000_RDTR 0x02820 /* RX Delay Timer - RW */ |
| #define E1000_RXDCTL 0x02828 /* RX Descriptor Control - RW */ |
| #define E1000_RADV 0x0282C /* RX Interrupt Absolute Delay Timer - RW */ |
| #define E1000_RSRPD 0x02C00 /* RX Small Packet Detect - RW */ |
| #define E1000_TXDMAC 0x03000 /* TX DMA Control - RW */ |
| #define E1000_TDBAL 0x03800 /* TX Descriptor Base Address Low - RW */ |
| #define E1000_TDBAH 0x03804 /* TX Descriptor Base Address High - RW */ |
| #define E1000_TDLEN 0x03808 /* TX Descriptor Length - RW */ |
| #define E1000_TDH 0x03810 /* TX Descriptor Head - RW */ |
| #define E1000_TDT 0x03818 /* TX Descripotr Tail - RW */ |
| #define E1000_TIDV 0x03820 /* TX Interrupt Delay Value - RW */ |
| #define E1000_TXDCTL 0x03828 /* TX Descriptor Control - RW */ |
| #define E1000_TADV 0x0382C /* TX Interrupt Absolute Delay Val - RW */ |
| #define E1000_TSPMT 0x03830 /* TCP Segmentation PAD & Min Threshold - RW */ |
| #define E1000_CRCERRS 0x04000 /* CRC Error Count - R/clr */ |
| #define E1000_ALGNERRC 0x04004 /* Alignment Error Count - R/clr */ |
| #define E1000_SYMERRS 0x04008 /* Symbol Error Count - R/clr */ |
| #define E1000_RXERRC 0x0400C /* Receive Error Count - R/clr */ |
| #define E1000_MPC 0x04010 /* Missed Packet Count - R/clr */ |
| #define E1000_SCC 0x04014 /* Single Collision Count - R/clr */ |
| #define E1000_ECOL 0x04018 /* Excessive Collision Count - R/clr */ |
| #define E1000_MCC 0x0401C /* Multiple Collision Count - R/clr */ |
| #define E1000_LATECOL 0x04020 /* Late Collision Count - R/clr */ |
| #define E1000_COLC 0x04028 /* Collision Count - R/clr */ |
| #define E1000_DC 0x04030 /* Defer Count - R/clr */ |
| #define E1000_TNCRS 0x04034 /* TX-No CRS - R/clr */ |
| #define E1000_SEC 0x04038 /* Sequence Error Count - R/clr */ |
| #define E1000_CEXTERR 0x0403C /* Carrier Extension Error Count - R/clr */ |
| #define E1000_RLEC 0x04040 /* Receive Length Error Count - R/clr */ |
| #define E1000_XONRXC 0x04048 /* XON RX Count - R/clr */ |
| #define E1000_XONTXC 0x0404C /* XON TX Count - R/clr */ |
| #define E1000_XOFFRXC 0x04050 /* XOFF RX Count - R/clr */ |
| #define E1000_XOFFTXC 0x04054 /* XOFF TX Count - R/clr */ |
| #define E1000_FCRUC 0x04058 /* Flow Control RX Unsupported Count- R/clr */ |
| #define E1000_PRC64 0x0405C /* Packets RX (64 bytes) - R/clr */ |
| #define E1000_PRC127 0x04060 /* Packets RX (65-127 bytes) - R/clr */ |
| #define E1000_PRC255 0x04064 /* Packets RX (128-255 bytes) - R/clr */ |
| #define E1000_PRC511 0x04068 /* Packets RX (255-511 bytes) - R/clr */ |
| #define E1000_PRC1023 0x0406C /* Packets RX (512-1023 bytes) - R/clr */ |
| #define E1000_PRC1522 0x04070 /* Packets RX (1024-1522 bytes) - R/clr */ |
| #define E1000_GPRC 0x04074 /* Good Packets RX Count - R/clr */ |
| #define E1000_BPRC 0x04078 /* Broadcast Packets RX Count - R/clr */ |
| #define E1000_MPRC 0x0407C /* Multicast Packets RX Count - R/clr */ |
| #define E1000_GPTC 0x04080 /* Good Packets TX Count - R/clr */ |
| #define E1000_GORCL 0x04088 /* Good Octets RX Count Low - R/clr */ |
| #define E1000_GORCH 0x0408C /* Good Octets RX Count High - R/clr */ |
| #define E1000_GOTCL 0x04090 /* Good Octets TX Count Low - R/clr */ |
| #define E1000_GOTCH 0x04094 /* Good Octets TX Count High - R/clr */ |
| #define E1000_RNBC 0x040A0 /* RX No Buffers Count - R/clr */ |
| #define E1000_RUC 0x040A4 /* RX Undersize Count - R/clr */ |
| #define E1000_RFC 0x040A8 /* RX Fragment Count - R/clr */ |
| #define E1000_ROC 0x040AC /* RX Oversize Count - R/clr */ |
| #define E1000_RJC 0x040B0 /* RX Jabber Count - R/clr */ |
| #define E1000_MGTPRC 0x040B4 /* Management Packets RX Count - R/clr */ |
| #define E1000_MGTPDC 0x040B8 /* Management Packets Dropped Count - R/clr */ |
| #define E1000_MGTPTC 0x040BC /* Management Packets TX Count - R/clr */ |
| #define E1000_TORL 0x040C0 /* Total Octets RX Low - R/clr */ |
| #define E1000_TORH 0x040C4 /* Total Octets RX High - R/clr */ |
| #define E1000_TOTL 0x040C8 /* Total Octets TX Low - R/clr */ |
| #define E1000_TOTH 0x040CC /* Total Octets TX High - R/clr */ |
| #define E1000_TPR 0x040D0 /* Total Packets RX - R/clr */ |
| #define E1000_TPT 0x040D4 /* Total Packets TX - R/clr */ |
| #define E1000_PTC64 0x040D8 /* Packets TX (64 bytes) - R/clr */ |
| #define E1000_PTC127 0x040DC /* Packets TX (65-127 bytes) - R/clr */ |
| #define E1000_PTC255 0x040E0 /* Packets TX (128-255 bytes) - R/clr */ |
| #define E1000_PTC511 0x040E4 /* Packets TX (256-511 bytes) - R/clr */ |
| #define E1000_PTC1023 0x040E8 /* Packets TX (512-1023 bytes) - R/clr */ |
| #define E1000_PTC1522 0x040EC /* Packets TX (1024-1522 Bytes) - R/clr */ |
| #define E1000_MPTC 0x040F0 /* Multicast Packets TX Count - R/clr */ |
| #define E1000_BPTC 0x040F4 /* Broadcast Packets TX Count - R/clr */ |
| #define E1000_TSCTC 0x040F8 /* TCP Segmentation Context TX - R/clr */ |
| #define E1000_TSCTFC 0x040FC /* TCP Segmentation Context TX Fail - R/clr */ |
| #define E1000_RXCSUM 0x05000 /* RX Checksum Control - RW */ |
| #define E1000_MTA 0x05200 /* Multicast Table Array - RW Array */ |
| #define E1000_RA 0x05400 /* Receive Address - RW Array */ |
| #define E1000_VFTA 0x05600 /* VLAN Filter Table Array - RW Array */ |
| #define E1000_WUC 0x05800 /* Wakeup Control - RW */ |
| #define E1000_WUFC 0x05808 /* Wakeup Filter Control - RW */ |
| #define E1000_WUS 0x05810 /* Wakeup Status - RO */ |
| #define E1000_MANC 0x05820 /* Management Control - RW */ |
| #define E1000_IPAV 0x05838 /* IP Address Valid - RW */ |
| #define E1000_IP4AT 0x05840 /* IPv4 Address Table - RW Array */ |
| #define E1000_IP6AT 0x05880 /* IPv6 Address Table - RW Array */ |
| #define E1000_WUPL 0x05900 /* Wakeup Packet Length - RW */ |
| #define E1000_WUPM 0x05A00 /* Wakeup Packet Memory - RO A */ |
| #define E1000_FFLT 0x05F00 /* Flexible Filter Length Table - RW Array */ |
| #define E1000_FFMT 0x09000 /* Flexible Filter Mask Table - RW Array */ |
| #define E1000_FFVT 0x09800 /* Flexible Filter Value Table - RW Array */ |
| |
| /* Register Set (82542) |
| * |
| * Some of the 82542 registers are located at different offsets than they are |
| * in more current versions of the 8254x. Despite the difference in location, |
| * the registers function in the same manner. |
| */ |
| #define E1000_82542_CTRL E1000_CTRL |
| #define E1000_82542_STATUS E1000_STATUS |
| #define E1000_82542_EECD E1000_EECD |
| #define E1000_82542_EERD E1000_EERD |
| #define E1000_82542_CTRL_EXT E1000_CTRL_EXT |
| #define E1000_82542_MDIC E1000_MDIC |
| #define E1000_82542_FCAL E1000_FCAL |
| #define E1000_82542_FCAH E1000_FCAH |
| #define E1000_82542_FCT E1000_FCT |
| #define E1000_82542_VET E1000_VET |
| #define E1000_82542_RA 0x00040 |
| #define E1000_82542_ICR E1000_ICR |
| #define E1000_82542_ITR E1000_ITR |
| #define E1000_82542_ICS E1000_ICS |
| #define E1000_82542_IMS E1000_IMS |
| #define E1000_82542_IMC E1000_IMC |
| #define E1000_82542_RCTL E1000_RCTL |
| #define E1000_82542_RDTR 0x00108 |
| #define E1000_82542_RDBAL 0x00110 |
| #define E1000_82542_RDBAH 0x00114 |
| #define E1000_82542_RDLEN 0x00118 |
| #define E1000_82542_RDH 0x00120 |
| #define E1000_82542_RDT 0x00128 |
| #define E1000_82542_FCRTH 0x00160 |
| #define E1000_82542_FCRTL 0x00168 |
| #define E1000_82542_FCTTV E1000_FCTTV |
| #define E1000_82542_TXCW E1000_TXCW |
| #define E1000_82542_RXCW E1000_RXCW |
| #define E1000_82542_MTA 0x00200 |
| #define E1000_82542_TCTL E1000_TCTL |
| #define E1000_82542_TIPG E1000_TIPG |
| #define E1000_82542_TDBAL 0x00420 |
| #define E1000_82542_TDBAH 0x00424 |
| #define E1000_82542_TDLEN 0x00428 |
| #define E1000_82542_TDH 0x00430 |
| #define E1000_82542_TDT 0x00438 |
| #define E1000_82542_TIDV 0x00440 |
| #define E1000_82542_TBT E1000_TBT |
| #define E1000_82542_AIT E1000_AIT |
| #define E1000_82542_VFTA 0x00600 |
| #define E1000_82542_LEDCTL E1000_LEDCTL |
| #define E1000_82542_PBA E1000_PBA |
| #define E1000_82542_RXDCTL E1000_RXDCTL |
| #define E1000_82542_RADV E1000_RADV |
| #define E1000_82542_RSRPD E1000_RSRPD |
| #define E1000_82542_TXDMAC E1000_TXDMAC |
| #define E1000_82542_TXDCTL E1000_TXDCTL |
| #define E1000_82542_TADV E1000_TADV |
| #define E1000_82542_TSPMT E1000_TSPMT |
| #define E1000_82542_CRCERRS E1000_CRCERRS |
| #define E1000_82542_ALGNERRC E1000_ALGNERRC |
| #define E1000_82542_SYMERRS E1000_SYMERRS |
| #define E1000_82542_RXERRC E1000_RXERRC |
| #define E1000_82542_MPC E1000_MPC |
| #define E1000_82542_SCC E1000_SCC |
| #define E1000_82542_ECOL E1000_ECOL |
| #define E1000_82542_MCC E1000_MCC |
| #define E1000_82542_LATECOL E1000_LATECOL |
| #define E1000_82542_COLC E1000_COLC |
| #define E1000_82542_DC E1000_DC |
| #define E1000_82542_TNCRS E1000_TNCRS |
| #define E1000_82542_SEC E1000_SEC |
| #define E1000_82542_CEXTERR E1000_CEXTERR |
| #define E1000_82542_RLEC E1000_RLEC |
| #define E1000_82542_XONRXC E1000_XONRXC |
| #define E1000_82542_XONTXC E1000_XONTXC |
| #define E1000_82542_XOFFRXC E1000_XOFFRXC |
| #define E1000_82542_XOFFTXC E1000_XOFFTXC |
| #define E1000_82542_FCRUC E1000_FCRUC |
| #define E1000_82542_PRC64 E1000_PRC64 |
| #define E1000_82542_PRC127 E1000_PRC127 |
| #define E1000_82542_PRC255 E1000_PRC255 |
| #define E1000_82542_PRC511 E1000_PRC511 |
| #define E1000_82542_PRC1023 E1000_PRC1023 |
| #define E1000_82542_PRC1522 E1000_PRC1522 |
| #define E1000_82542_GPRC E1000_GPRC |
| #define E1000_82542_BPRC E1000_BPRC |
| #define E1000_82542_MPRC E1000_MPRC |
| #define E1000_82542_GPTC E1000_GPTC |
| #define E1000_82542_GORCL E1000_GORCL |
| #define E1000_82542_GORCH E1000_GORCH |
| #define E1000_82542_GOTCL E1000_GOTCL |
| #define E1000_82542_GOTCH E1000_GOTCH |
| #define E1000_82542_RNBC E1000_RNBC |
| #define E1000_82542_RUC E1000_RUC |
| #define E1000_82542_RFC E1000_RFC |
| #define E1000_82542_ROC E1000_ROC |
| #define E1000_82542_RJC E1000_RJC |
| #define E1000_82542_MGTPRC E1000_MGTPRC |
| #define E1000_82542_MGTPDC E1000_MGTPDC |
| #define E1000_82542_MGTPTC E1000_MGTPTC |
| #define E1000_82542_TORL E1000_TORL |
| #define E1000_82542_TORH E1000_TORH |
| #define E1000_82542_TOTL E1000_TOTL |
| #define E1000_82542_TOTH E1000_TOTH |
| #define E1000_82542_TPR E1000_TPR |
| #define E1000_82542_TPT E1000_TPT |
| #define E1000_82542_PTC64 E1000_PTC64 |
| #define E1000_82542_PTC127 E1000_PTC127 |
| #define E1000_82542_PTC255 E1000_PTC255 |
| #define E1000_82542_PTC511 E1000_PTC511 |
| #define E1000_82542_PTC1023 E1000_PTC1023 |
| #define E1000_82542_PTC1522 E1000_PTC1522 |
| #define E1000_82542_MPTC E1000_MPTC |
| #define E1000_82542_BPTC E1000_BPTC |
| #define E1000_82542_TSCTC E1000_TSCTC |
| #define E1000_82542_TSCTFC E1000_TSCTFC |
| #define E1000_82542_RXCSUM E1000_RXCSUM |
| #define E1000_82542_WUC E1000_WUC |
| #define E1000_82542_WUFC E1000_WUFC |
| #define E1000_82542_WUS E1000_WUS |
| #define E1000_82542_MANC E1000_MANC |
| #define E1000_82542_IPAV E1000_IPAV |
| #define E1000_82542_IP4AT E1000_IP4AT |
| #define E1000_82542_IP6AT E1000_IP6AT |
| #define E1000_82542_WUPL E1000_WUPL |
| #define E1000_82542_WUPM E1000_WUPM |
| #define E1000_82542_FFLT E1000_FFLT |
| #define E1000_82542_FFMT E1000_FFMT |
| #define E1000_82542_FFVT E1000_FFVT |
| |
| /* Statistics counters collected by the MAC */ |
| struct e1000_hw_stats { |
| uint64_t crcerrs; |
| uint64_t algnerrc; |
| uint64_t symerrs; |
| uint64_t rxerrc; |
| uint64_t mpc; |
| uint64_t scc; |
| uint64_t ecol; |
| uint64_t mcc; |
| uint64_t latecol; |
| uint64_t colc; |
| uint64_t dc; |
| uint64_t tncrs; |
| uint64_t sec; |
| uint64_t cexterr; |
| uint64_t rlec; |
| uint64_t xonrxc; |
| uint64_t xontxc; |
| uint64_t xoffrxc; |
| uint64_t xofftxc; |
| uint64_t fcruc; |
| uint64_t prc64; |
| uint64_t prc127; |
| uint64_t prc255; |
| uint64_t prc511; |
| uint64_t prc1023; |
| uint64_t prc1522; |
| uint64_t gprc; |
| uint64_t bprc; |
| uint64_t mprc; |
| uint64_t gptc; |
| uint64_t gorcl; |
| uint64_t gorch; |
| uint64_t gotcl; |
| uint64_t gotch; |
| uint64_t rnbc; |
| uint64_t ruc; |
| uint64_t rfc; |
| uint64_t roc; |
| uint64_t rjc; |
| uint64_t mgprc; |
| uint64_t mgpdc; |
| uint64_t mgptc; |
| uint64_t torl; |
| uint64_t torh; |
| uint64_t totl; |
| uint64_t toth; |
| uint64_t tpr; |
| uint64_t tpt; |
| uint64_t ptc64; |
| uint64_t ptc127; |
| uint64_t ptc255; |
| uint64_t ptc511; |
| uint64_t ptc1023; |
| uint64_t ptc1522; |
| uint64_t mptc; |
| uint64_t bptc; |
| uint64_t tsctc; |
| uint64_t tsctfc; |
| }; |
| |
| /* Structure containing variables used by the shared code (e1000_hw.c) */ |
| struct e1000_hw { |
| pci_dev_t pdev; |
| uint8_t *hw_addr; |
| e1000_mac_type mac_type; |
| e1000_media_type media_type; |
| e1000_lan_loc lan_loc; |
| e1000_fc_type fc; |
| #if 0 |
| e1000_bus_speed bus_speed; |
| e1000_bus_width bus_width; |
| e1000_bus_type bus_type; |
| uint32_t io_base; |
| #endif |
| uint32_t phy_id; |
| uint32_t phy_addr; |
| uint32_t original_fc; |
| uint32_t txcw; |
| uint32_t autoneg_failed; |
| #if 0 |
| uint32_t max_frame_size; |
| uint32_t min_frame_size; |
| uint32_t mc_filter_type; |
| uint32_t num_mc_addrs; |
| uint32_t collision_delta; |
| uint32_t tx_packet_delta; |
| uint32_t ledctl_default; |
| uint32_t ledctl_mode1; |
| uint32_t ledctl_mode2; |
| #endif |
| uint16_t autoneg_advertised; |
| uint16_t pci_cmd_word; |
| uint16_t fc_high_water; |
| uint16_t fc_low_water; |
| uint16_t fc_pause_time; |
| #if 0 |
| uint16_t current_ifs_val; |
| uint16_t ifs_min_val; |
| uint16_t ifs_max_val; |
| uint16_t ifs_step_size; |
| uint16_t ifs_ratio; |
| #endif |
| uint16_t device_id; |
| uint16_t vendor_id; |
| uint16_t subsystem_id; |
| uint16_t subsystem_vendor_id; |
| uint8_t revision_id; |
| #if 0 |
| uint8_t autoneg; |
| uint8_t mdix; |
| uint8_t forced_speed_duplex; |
| uint8_t wait_autoneg_complete; |
| uint8_t dma_fairness; |
| #endif |
| #if 0 |
| uint8_t perm_mac_addr[NODE_ADDRESS_SIZE]; |
| boolean_t disable_polarity_correction; |
| #endif |
| boolean_t get_link_status; |
| boolean_t tbi_compatibility_en; |
| boolean_t tbi_compatibility_on; |
| boolean_t fc_send_xon; |
| boolean_t report_tx_early; |
| #if 0 |
| boolean_t adaptive_ifs; |
| boolean_t ifs_params_forced; |
| boolean_t in_ifs_mode; |
| #endif |
| }; |
| |
| #define E1000_EEPROM_SWDPIN0 0x0001 /* SWDPIN 0 EEPROM Value */ |
| #define E1000_EEPROM_LED_LOGIC 0x0020 /* Led Logic Word */ |
| |
| /* Register Bit Masks */ |
| /* Device Control */ |
| #define E1000_CTRL_FD 0x00000001 /* Full duplex.0=half; 1=full */ |
| #define E1000_CTRL_BEM 0x00000002 /* Endian Mode.0=little,1=big */ |
| #define E1000_CTRL_PRIOR 0x00000004 /* Priority on PCI. 0=rx,1=fair */ |
| #define E1000_CTRL_LRST 0x00000008 /* Link reset. 0=normal,1=reset */ |
| #define E1000_CTRL_TME 0x00000010 /* Test mode. 0=normal,1=test */ |
| #define E1000_CTRL_SLE 0x00000020 /* Serial Link on 0=dis,1=en */ |
| #define E1000_CTRL_ASDE 0x00000020 /* Auto-speed detect enable */ |
| #define E1000_CTRL_SLU 0x00000040 /* Set link up (Force Link) */ |
| #define E1000_CTRL_ILOS 0x00000080 /* Invert Loss-Of Signal */ |
| #define E1000_CTRL_SPD_SEL 0x00000300 /* Speed Select Mask */ |
| #define E1000_CTRL_SPD_10 0x00000000 /* Force 10Mb */ |
| #define E1000_CTRL_SPD_100 0x00000100 /* Force 100Mb */ |
| #define E1000_CTRL_SPD_1000 0x00000200 /* Force 1Gb */ |
| #define E1000_CTRL_BEM32 0x00000400 /* Big Endian 32 mode */ |
| #define E1000_CTRL_FRCSPD 0x00000800 /* Force Speed */ |
| #define E1000_CTRL_FRCDPX 0x00001000 /* Force Duplex */ |
| #define E1000_CTRL_SWDPIN0 0x00040000 /* SWDPIN 0 value */ |
| #define E1000_CTRL_SWDPIN1 0x00080000 /* SWDPIN 1 value */ |
| #define E1000_CTRL_SWDPIN2 0x00100000 /* SWDPIN 2 value */ |
| #define E1000_CTRL_SWDPIN3 0x00200000 /* SWDPIN 3 value */ |
| #define E1000_CTRL_SWDPIO0 0x00400000 /* SWDPIN 0 Input or output */ |
| #define E1000_CTRL_SWDPIO1 0x00800000 /* SWDPIN 1 input or output */ |
| #define E1000_CTRL_SWDPIO2 0x01000000 /* SWDPIN 2 input or output */ |
| #define E1000_CTRL_SWDPIO3 0x02000000 /* SWDPIN 3 input or output */ |
| #define E1000_CTRL_RST 0x04000000 /* Global reset */ |
| #define E1000_CTRL_RFCE 0x08000000 /* Receive Flow Control enable */ |
| #define E1000_CTRL_TFCE 0x10000000 /* Transmit flow control enable */ |
| #define E1000_CTRL_RTE 0x20000000 /* Routing tag enable */ |
| #define E1000_CTRL_VME 0x40000000 /* IEEE VLAN mode enable */ |
| #define E1000_CTRL_PHY_RST 0x80000000 /* PHY Reset */ |
| |
| /* Device Status */ |
| #define E1000_STATUS_FD 0x00000001 /* Full duplex.0=half,1=full */ |
| #define E1000_STATUS_LU 0x00000002 /* Link up.0=no,1=link */ |
| #define E1000_STATUS_FUNC_MASK 0x0000000C /* PCI Function Mask */ |
| #define E1000_STATUS_FUNC_0 0x00000000 /* Function 0 */ |
| #define E1000_STATUS_FUNC_1 0x00000004 /* Function 1 */ |
| #define E1000_STATUS_TXOFF 0x00000010 /* transmission paused */ |
| #define E1000_STATUS_TBIMODE 0x00000020 /* TBI mode */ |
| #define E1000_STATUS_SPEED_MASK 0x000000C0 |
| #define E1000_STATUS_SPEED_10 0x00000000 /* Speed 10Mb/s */ |
| #define E1000_STATUS_SPEED_100 0x00000040 /* Speed 100Mb/s */ |
| #define E1000_STATUS_SPEED_1000 0x00000080 /* Speed 1000Mb/s */ |
| #define E1000_STATUS_ASDV 0x00000300 /* Auto speed detect value */ |
| #define E1000_STATUS_MTXCKOK 0x00000400 /* MTX clock running OK */ |
| #define E1000_STATUS_PCI66 0x00000800 /* In 66Mhz slot */ |
| #define E1000_STATUS_BUS64 0x00001000 /* In 64 bit slot */ |
| #define E1000_STATUS_PCIX_MODE 0x00002000 /* PCI-X mode */ |
| #define E1000_STATUS_PCIX_SPEED 0x0000C000 /* PCI-X bus speed */ |
| |
| /* Constants used to intrepret the masked PCI-X bus speed. */ |
| #define E1000_STATUS_PCIX_SPEED_66 0x00000000 /* PCI-X bus speed 50-66 MHz */ |
| #define E1000_STATUS_PCIX_SPEED_100 0x00004000 /* PCI-X bus speed 66-100 MHz */ |
| #define E1000_STATUS_PCIX_SPEED_133 0x00008000 /* PCI-X bus speed 100-133 MHz */ |
| |
| /* EEPROM/Flash Control */ |
| #define E1000_EECD_SK 0x00000001 /* EEPROM Clock */ |
| #define E1000_EECD_CS 0x00000002 /* EEPROM Chip Select */ |
| #define E1000_EECD_DI 0x00000004 /* EEPROM Data In */ |
| #define E1000_EECD_DO 0x00000008 /* EEPROM Data Out */ |
| #define E1000_EECD_FWE_MASK 0x00000030 |
| #define E1000_EECD_FWE_DIS 0x00000010 /* Disable FLASH writes */ |
| #define E1000_EECD_FWE_EN 0x00000020 /* Enable FLASH writes */ |
| #define E1000_EECD_FWE_SHIFT 4 |
| #define E1000_EECD_SIZE 0x00000200 /* EEPROM Size (0=64 word 1=256 word) */ |
| #define E1000_EECD_REQ 0x00000040 /* EEPROM Access Request */ |
| #define E1000_EECD_GNT 0x00000080 /* EEPROM Access Grant */ |
| #define E1000_EECD_PRES 0x00000100 /* EEPROM Present */ |
| |
| /* EEPROM Read */ |
| #define E1000_EERD_START 0x00000001 /* Start Read */ |
| #define E1000_EERD_DONE 0x00000010 /* Read Done */ |
| #define E1000_EERD_ADDR_SHIFT 8 |
| #define E1000_EERD_ADDR_MASK 0x0000FF00 /* Read Address */ |
| #define E1000_EERD_DATA_SHIFT 16 |
| #define E1000_EERD_DATA_MASK 0xFFFF0000 /* Read Data */ |
| |
| /* Extended Device Control */ |
| #define E1000_CTRL_EXT_GPI0_EN 0x00000001 /* Maps SDP4 to GPI0 */ |
| #define E1000_CTRL_EXT_GPI1_EN 0x00000002 /* Maps SDP5 to GPI1 */ |
| #define E1000_CTRL_EXT_PHYINT_EN E1000_CTRL_EXT_GPI1_EN |
| #define E1000_CTRL_EXT_GPI2_EN 0x00000004 /* Maps SDP6 to GPI2 */ |
| #define E1000_CTRL_EXT_GPI3_EN 0x00000008 /* Maps SDP7 to GPI3 */ |
| #define E1000_CTRL_EXT_SDP4_DATA 0x00000010 /* Value of SW Defineable Pin 4 */ |
| #define E1000_CTRL_EXT_SDP5_DATA 0x00000020 /* Value of SW Defineable Pin 5 */ |
| #define E1000_CTRL_EXT_PHY_INT E1000_CTRL_EXT_SDP5_DATA |
| #define E1000_CTRL_EXT_SDP6_DATA 0x00000040 /* Value of SW Defineable Pin 6 */ |
| #define E1000_CTRL_EXT_SWDPIN6 0x00000040 /* SWDPIN 6 value */ |
| #define E1000_CTRL_EXT_SDP7_DATA 0x00000080 /* Value of SW Defineable Pin 7 */ |
| #define E1000_CTRL_EXT_SWDPIN7 0x00000080 /* SWDPIN 7 value */ |
| #define E1000_CTRL_EXT_SDP4_DIR 0x00000100 /* Direction of SDP4 0=in 1=out */ |
| #define E1000_CTRL_EXT_SDP5_DIR 0x00000200 /* Direction of SDP5 0=in 1=out */ |
| #define E1000_CTRL_EXT_SDP6_DIR 0x00000400 /* Direction of SDP6 0=in 1=out */ |
| #define E1000_CTRL_EXT_SWDPIO6 0x00000400 /* SWDPIN 6 Input or output */ |
| #define E1000_CTRL_EXT_SDP7_DIR 0x00000800 /* Direction of SDP7 0=in 1=out */ |
| #define E1000_CTRL_EXT_SWDPIO7 0x00000800 /* SWDPIN 7 Input or output */ |
| #define E1000_CTRL_EXT_ASDCHK 0x00001000 /* Initiate an ASD sequence */ |
| #define E1000_CTRL_EXT_EE_RST 0x00002000 /* Reinitialize from EEPROM */ |
| #define E1000_CTRL_EXT_IPS 0x00004000 /* Invert Power State */ |
| #define E1000_CTRL_EXT_SPD_BYPS 0x00008000 /* Speed Select Bypass */ |
| #define E1000_CTRL_EXT_LINK_MODE_MASK 0x00C00000 |
| #define E1000_CTRL_EXT_LINK_MODE_GMII 0x00000000 |
| #define E1000_CTRL_EXT_LINK_MODE_TBI 0x00C00000 |
| #define E1000_CTRL_EXT_WR_WMARK_MASK 0x03000000 |
| #define E1000_CTRL_EXT_WR_WMARK_256 0x00000000 |
| #define E1000_CTRL_EXT_WR_WMARK_320 0x01000000 |
| #define E1000_CTRL_EXT_WR_WMARK_384 0x02000000 |
| #define E1000_CTRL_EXT_WR_WMARK_448 0x03000000 |
| |
| /* MDI Control */ |
| #define E1000_MDIC_DATA_MASK 0x0000FFFF |
| #define E1000_MDIC_REG_MASK 0x001F0000 |
| #define E1000_MDIC_REG_SHIFT 16 |
| #define E1000_MDIC_PHY_MASK 0x03E00000 |
| #define E1000_MDIC_PHY_SHIFT 21 |
| #define E1000_MDIC_OP_WRITE 0x04000000 |
| #define E1000_MDIC_OP_READ 0x08000000 |
| #define E1000_MDIC_READY 0x10000000 |
| #define E1000_MDIC_INT_EN 0x20000000 |
| #define E1000_MDIC_ERROR 0x40000000 |
| |
| /* LED Control */ |
| #define E1000_LEDCTL_LED0_MODE_MASK 0x0000000F |
| #define E1000_LEDCTL_LED0_MODE_SHIFT 0 |
| #define E1000_LEDCTL_LED0_IVRT 0x00000040 |
| #define E1000_LEDCTL_LED0_BLINK 0x00000080 |
| #define E1000_LEDCTL_LED1_MODE_MASK 0x00000F00 |
| #define E1000_LEDCTL_LED1_MODE_SHIFT 8 |
| #define E1000_LEDCTL_LED1_IVRT 0x00004000 |
| #define E1000_LEDCTL_LED1_BLINK 0x00008000 |
| #define E1000_LEDCTL_LED2_MODE_MASK 0x000F0000 |
| #define E1000_LEDCTL_LED2_MODE_SHIFT 16 |
| #define E1000_LEDCTL_LED2_IVRT 0x00400000 |
| #define E1000_LEDCTL_LED2_BLINK 0x00800000 |
| #define E1000_LEDCTL_LED3_MODE_MASK 0x0F000000 |
| #define E1000_LEDCTL_LED3_MODE_SHIFT 24 |
| #define E1000_LEDCTL_LED3_IVRT 0x40000000 |
| #define E1000_LEDCTL_LED3_BLINK 0x80000000 |
| |
| #define E1000_LEDCTL_MODE_LINK_10_1000 0x0 |
| #define E1000_LEDCTL_MODE_LINK_100_1000 0x1 |
| #define E1000_LEDCTL_MODE_LINK_UP 0x2 |
| #define E1000_LEDCTL_MODE_ACTIVITY 0x3 |
| #define E1000_LEDCTL_MODE_LINK_ACTIVITY 0x4 |
| #define E1000_LEDCTL_MODE_LINK_10 0x5 |
| #define E1000_LEDCTL_MODE_LINK_100 0x6 |
| #define E1000_LEDCTL_MODE_LINK_1000 0x7 |
| #define E1000_LEDCTL_MODE_PCIX_MODE 0x8 |
| #define E1000_LEDCTL_MODE_FULL_DUPLEX 0x9 |
| #define E1000_LEDCTL_MODE_COLLISION 0xA |
| #define E1000_LEDCTL_MODE_BUS_SPEED 0xB |
| #define E1000_LEDCTL_MODE_BUS_SIZE 0xC |
| #define E1000_LEDCTL_MODE_PAUSED 0xD |
| #define E1000_LEDCTL_MODE_LED_ON 0xE |
| #define E1000_LEDCTL_MODE_LED_OFF 0xF |
| |
| /* Receive Address */ |
| #define E1000_RAH_AV 0x80000000 /* Receive descriptor valid */ |
| |
| /* Interrupt Cause Read */ |
| #define E1000_ICR_TXDW 0x00000001 /* Transmit desc written back */ |
| #define E1000_ICR_TXQE 0x00000002 /* Transmit Queue empty */ |
| #define E1000_ICR_LSC 0x00000004 /* Link Status Change */ |
| #define E1000_ICR_RXSEQ 0x00000008 /* rx sequence error */ |
| #define E1000_ICR_RXDMT0 0x00000010 /* rx desc min. threshold (0) */ |
| #define E1000_ICR_RXO 0x00000040 /* rx overrun */ |
| #define E1000_ICR_RXT0 0x00000080 /* rx timer intr (ring 0) */ |
| #define E1000_ICR_MDAC 0x00000200 /* MDIO access complete */ |
| #define E1000_ICR_RXCFG 0x00000400 /* RX /c/ ordered set */ |
| #define E1000_ICR_GPI_EN0 0x00000800 /* GP Int 0 */ |
| #define E1000_ICR_GPI_EN1 0x00001000 /* GP Int 1 */ |
| #define E1000_ICR_GPI_EN2 0x00002000 /* GP Int 2 */ |
| #define E1000_ICR_GPI_EN3 0x00004000 /* GP Int 3 */ |
| #define E1000_ICR_TXD_LOW 0x00008000 |
| #define E1000_ICR_SRPD 0x00010000 |
| |
| /* Interrupt Cause Set */ |
| #define E1000_ICS_TXDW E1000_ICR_TXDW /* Transmit desc written back */ |
| #define E1000_ICS_TXQE E1000_ICR_TXQE /* Transmit Queue empty */ |
| #define E1000_ICS_LSC E1000_ICR_LSC /* Link Status Change */ |
| #define E1000_ICS_RXSEQ E1000_ICR_RXSEQ /* rx sequence error */ |
| #define E1000_ICS_RXDMT0 E1000_ICR_RXDMT0 /* rx desc min. threshold */ |
| #define E1000_ICS_RXO E1000_ICR_RXO /* rx overrun */ |
| #define E1000_ICS_RXT0 E1000_ICR_RXT0 /* rx timer intr */ |
| #define E1000_ICS_MDAC E1000_ICR_MDAC /* MDIO access complete */ |
| #define E1000_ICS_RXCFG E1000_ICR_RXCFG /* RX /c/ ordered set */ |
| #define E1000_ICS_GPI_EN0 E1000_ICR_GPI_EN0 /* GP Int 0 */ |
| #define E1000_ICS_GPI_EN1 E1000_ICR_GPI_EN1 /* GP Int 1 */ |
| #define E1000_ICS_GPI_EN2 E1000_ICR_GPI_EN2 /* GP Int 2 */ |
| #define E1000_ICS_GPI_EN3 E1000_ICR_GPI_EN3 /* GP Int 3 */ |
| #define E1000_ICS_TXD_LOW E1000_ICR_TXD_LOW |
| #define E1000_ICS_SRPD E1000_ICR_SRPD |
| |
| /* Interrupt Mask Set */ |
| #define E1000_IMS_TXDW E1000_ICR_TXDW /* Transmit desc written back */ |
| #define E1000_IMS_TXQE E1000_ICR_TXQE /* Transmit Queue empty */ |
| #define E1000_IMS_LSC E1000_ICR_LSC /* Link Status Change */ |
| #define E1000_IMS_RXSEQ E1000_ICR_RXSEQ /* rx sequence error */ |
| #define E1000_IMS_RXDMT0 E1000_ICR_RXDMT0 /* rx desc min. threshold */ |
| #define E1000_IMS_RXO E1000_ICR_RXO /* rx overrun */ |
| #define E1000_IMS_RXT0 E1000_ICR_RXT0 /* rx timer intr */ |
| #define E1000_IMS_MDAC E1000_ICR_MDAC /* MDIO access complete */ |
| #define E1000_IMS_RXCFG E1000_ICR_RXCFG /* RX /c/ ordered set */ |
| #define E1000_IMS_GPI_EN0 E1000_ICR_GPI_EN0 /* GP Int 0 */ |
| #define E1000_IMS_GPI_EN1 E1000_ICR_GPI_EN1 /* GP Int 1 */ |
| #define E1000_IMS_GPI_EN2 E1000_ICR_GPI_EN2 /* GP Int 2 */ |
| #define E1000_IMS_GPI_EN3 E1000_ICR_GPI_EN3 /* GP Int 3 */ |
| #define E1000_IMS_TXD_LOW E1000_ICR_TXD_LOW |
| #define E1000_IMS_SRPD E1000_ICR_SRPD |
| |
| /* Interrupt Mask Clear */ |
| #define E1000_IMC_TXDW E1000_ICR_TXDW /* Transmit desc written back */ |
| #define E1000_IMC_TXQE E1000_ICR_TXQE /* Transmit Queue empty */ |
| #define E1000_IMC_LSC E1000_ICR_LSC /* Link Status Change */ |
| #define E1000_IMC_RXSEQ E1000_ICR_RXSEQ /* rx sequence error */ |
| #define E1000_IMC_RXDMT0 E1000_ICR_RXDMT0 /* rx desc min. threshold */ |
| #define E1000_IMC_RXO E1000_ICR_RXO /* rx overrun */ |
| #define E1000_IMC_RXT0 E1000_ICR_RXT0 /* rx timer intr */ |
| #define E1000_IMC_MDAC E1000_ICR_MDAC /* MDIO access complete */ |
| #define E1000_IMC_RXCFG E1000_ICR_RXCFG /* RX /c/ ordered set */ |
| #define E1000_IMC_GPI_EN0 E1000_ICR_GPI_EN0 /* GP Int 0 */ |
| #define E1000_IMC_GPI_EN1 E1000_ICR_GPI_EN1 /* GP Int 1 */ |
| #define E1000_IMC_GPI_EN2 E1000_ICR_GPI_EN2 /* GP Int 2 */ |
| #define E1000_IMC_GPI_EN3 E1000_ICR_GPI_EN3 /* GP Int 3 */ |
| #define E1000_IMC_TXD_LOW E1000_ICR_TXD_LOW |
| #define E1000_IMC_SRPD E1000_ICR_SRPD |
| |
| /* Receive Control */ |
| #define E1000_RCTL_RST 0x00000001 /* Software reset */ |
| #define E1000_RCTL_EN 0x00000002 /* enable */ |
| #define E1000_RCTL_SBP 0x00000004 /* store bad packet */ |
| #define E1000_RCTL_UPE 0x00000008 /* unicast promiscuous enable */ |
| #define E1000_RCTL_MPE 0x00000010 /* multicast promiscuous enab */ |
| #define E1000_RCTL_LPE 0x00000020 /* long packet enable */ |
| #define E1000_RCTL_LBM_NO 0x00000000 /* no loopback mode */ |
| #define E1000_RCTL_LBM_MAC 0x00000040 /* MAC loopback mode */ |
| #define E1000_RCTL_LBM_SLP 0x00000080 /* serial link loopback mode */ |
| #define E1000_RCTL_LBM_TCVR 0x000000C0 /* tcvr loopback mode */ |
| #define E1000_RCTL_RDMTS_HALF 0x00000000 /* rx desc min threshold size */ |
| #define E1000_RCTL_RDMTS_QUAT 0x00000100 /* rx desc min threshold size */ |
| #define E1000_RCTL_RDMTS_EIGTH 0x00000200 /* rx desc min threshold size */ |
| #define E1000_RCTL_MO_SHIFT 12 /* multicast offset shift */ |
| #define E1000_RCTL_MO_0 0x00000000 /* multicast offset 11:0 */ |
| #define E1000_RCTL_MO_1 0x00001000 /* multicast offset 12:1 */ |
| #define E1000_RCTL_MO_2 0x00002000 /* multicast offset 13:2 */ |
| #define E1000_RCTL_MO_3 0x00003000 /* multicast offset 15:4 */ |
| #define E1000_RCTL_MDR 0x00004000 /* multicast desc ring 0 */ |
| #define E1000_RCTL_BAM 0x00008000 /* broadcast enable */ |
| /* these buffer sizes are valid if E1000_RCTL_BSEX is 0 */ |
| #define E1000_RCTL_SZ_2048 0x00000000 /* rx buffer size 2048 */ |
| #define E1000_RCTL_SZ_1024 0x00010000 /* rx buffer size 1024 */ |
| #define E1000_RCTL_SZ_512 0x00020000 /* rx buffer size 512 */ |
| #define E1000_RCTL_SZ_256 0x00030000 /* rx buffer size 256 */ |
| /* these buffer sizes are valid if E1000_RCTL_BSEX is 1 */ |
| #define E1000_RCTL_SZ_16384 0x00010000 /* rx buffer size 16384 */ |
| #define E1000_RCTL_SZ_8192 0x00020000 /* rx buffer size 8192 */ |
| #define E1000_RCTL_SZ_4096 0x00030000 /* rx buffer size 4096 */ |
| #define E1000_RCTL_VFE 0x00040000 /* vlan filter enable */ |
| #define E1000_RCTL_CFIEN 0x00080000 /* canonical form enable */ |
| #define E1000_RCTL_CFI 0x00100000 /* canonical form indicator */ |
| #define E1000_RCTL_DPF 0x00400000 /* discard pause frames */ |
| #define E1000_RCTL_PMCF 0x00800000 /* pass MAC control frames */ |
| #define E1000_RCTL_BSEX 0x02000000 /* Buffer size extension */ |
| |
| /* Receive Descriptor */ |
| #define E1000_RDT_DELAY 0x0000ffff /* Delay timer (1=1024us) */ |
| #define E1000_RDT_FPDB 0x80000000 /* Flush descriptor block */ |
| #define E1000_RDLEN_LEN 0x0007ff80 /* descriptor length */ |
| #define E1000_RDH_RDH 0x0000ffff /* receive descriptor head */ |
| #define E1000_RDT_RDT 0x0000ffff /* receive descriptor tail */ |
| |
| /* Flow Control */ |
| #define E1000_FCRTH_RTH 0x0000FFF8 /* Mask Bits[15:3] for RTH */ |
| #define E1000_FCRTH_XFCE 0x80000000 /* External Flow Control Enable */ |
| #define E1000_FCRTL_RTL 0x0000FFF8 /* Mask Bits[15:3] for RTL */ |
| #define E1000_FCRTL_XONE 0x80000000 /* Enable XON frame transmission */ |
| |
| /* Receive Descriptor Control */ |
| #define E1000_RXDCTL_PTHRESH 0x0000003F /* RXDCTL Prefetch Threshold */ |
| #define E1000_RXDCTL_HTHRESH 0x00003F00 /* RXDCTL Host Threshold */ |
| #define E1000_RXDCTL_WTHRESH 0x003F0000 /* RXDCTL Writeback Threshold */ |
| #define E1000_RXDCTL_GRAN 0x01000000 /* RXDCTL Granularity */ |
| |
| /* Transmit Descriptor Control */ |
| #define E1000_TXDCTL_PTHRESH 0x000000FF /* TXDCTL Prefetch Threshold */ |
| #define E1000_TXDCTL_HTHRESH 0x0000FF00 /* TXDCTL Host Threshold */ |
| #define E1000_TXDCTL_WTHRESH 0x00FF0000 /* TXDCTL Writeback Threshold */ |
| #define E1000_TXDCTL_GRAN 0x01000000 /* TXDCTL Granularity */ |
| #define E1000_TXDCTL_LWTHRESH 0xFE000000 /* TXDCTL Low Threshold */ |
| #define E1000_TXDCTL_FULL_TX_DESC_WB 0x01010000 /* GRAN=1, WTHRESH=1 */ |
| |
| /* Transmit Configuration Word */ |
| #define E1000_TXCW_FD 0x00000020 /* TXCW full duplex */ |
| #define E1000_TXCW_HD 0x00000040 /* TXCW half duplex */ |
| #define E1000_TXCW_PAUSE 0x00000080 /* TXCW sym pause request */ |
| #define E1000_TXCW_ASM_DIR 0x00000100 /* TXCW astm pause direction */ |
| #define E1000_TXCW_PAUSE_MASK 0x00000180 /* TXCW pause request mask */ |
| #define E1000_TXCW_RF 0x00003000 /* TXCW remote fault */ |
| #define E1000_TXCW_NP 0x00008000 /* TXCW next page */ |
| #define E1000_TXCW_CW 0x0000ffff /* TxConfigWord mask */ |
| #define E1000_TXCW_TXC 0x40000000 /* Transmit Config control */ |
| #define E1000_TXCW_ANE 0x80000000 /* Auto-neg enable */ |
| |
| /* Receive Configuration Word */ |
| #define E1000_RXCW_CW 0x0000ffff /* RxConfigWord mask */ |
| #define E1000_RXCW_NC 0x04000000 /* Receive config no carrier */ |
| #define E1000_RXCW_IV 0x08000000 /* Receive config invalid */ |
| #define E1000_RXCW_CC 0x10000000 /* Receive config change */ |
| #define E1000_RXCW_C 0x20000000 /* Receive config */ |
| #define E1000_RXCW_SYNCH 0x40000000 /* Receive config synch */ |
| #define E1000_RXCW_ANC 0x80000000 /* Auto-neg complete */ |
| |
| /* Transmit Control */ |
| #define E1000_TCTL_RST 0x00000001 /* software reset */ |
| #define E1000_TCTL_EN 0x00000002 /* enable tx */ |
| #define E1000_TCTL_BCE 0x00000004 /* busy check enable */ |
| #define E1000_TCTL_PSP 0x00000008 /* pad short packets */ |
| #define E1000_TCTL_CT 0x00000ff0 /* collision threshold */ |
| #define E1000_TCTL_COLD 0x003ff000 /* collision distance */ |
| #define E1000_TCTL_SWXOFF 0x00400000 /* SW Xoff transmission */ |
| #define E1000_TCTL_PBE 0x00800000 /* Packet Burst Enable */ |
| #define E1000_TCTL_RTLC 0x01000000 /* Re-transmit on late collision */ |
| #define E1000_TCTL_NRTU 0x02000000 /* No Re-transmit on underrun */ |
| |
| /* Receive Checksum Control */ |
| #define E1000_RXCSUM_PCSS_MASK 0x000000FF /* Packet Checksum Start */ |
| #define E1000_RXCSUM_IPOFL 0x00000100 /* IPv4 checksum offload */ |
| #define E1000_RXCSUM_TUOFL 0x00000200 /* TCP / UDP checksum offload */ |
| #define E1000_RXCSUM_IPV6OFL 0x00000400 /* IPv6 checksum offload */ |
| |
| /* Definitions for power management and wakeup registers */ |
| /* Wake Up Control */ |
| #define E1000_WUC_APME 0x00000001 /* APM Enable */ |
| #define E1000_WUC_PME_EN 0x00000002 /* PME Enable */ |
| #define E1000_WUC_PME_STATUS 0x00000004 /* PME Status */ |
| #define E1000_WUC_APMPME 0x00000008 /* Assert PME on APM Wakeup */ |
| |
| /* Wake Up Filter Control */ |
| #define E1000_WUFC_LNKC 0x00000001 /* Link Status Change Wakeup Enable */ |
| #define E1000_WUFC_MAG 0x00000002 /* Magic Packet Wakeup Enable */ |
| #define E1000_WUFC_EX 0x00000004 /* Directed Exact Wakeup Enable */ |
| #define E1000_WUFC_MC 0x00000008 /* Directed Multicast Wakeup Enable */ |
| #define E1000_WUFC_BC 0x00000010 /* Broadcast Wakeup Enable */ |
| #define E1000_WUFC_ARP 0x00000020 /* ARP Request Packet Wakeup Enable */ |
| #define E1000_WUFC_IPV4 0x00000040 /* Directed IPv4 Packet Wakeup Enable */ |
| #define E1000_WUFC_IPV6 0x00000080 /* Directed IPv6 Packet Wakeup Enable */ |
| #define E1000_WUFC_FLX0 0x00010000 /* Flexible Filter 0 Enable */ |
| #define E1000_WUFC_FLX1 0x00020000 /* Flexible Filter 1 Enable */ |
| #define E1000_WUFC_FLX2 0x00040000 /* Flexible Filter 2 Enable */ |
| #define E1000_WUFC_FLX3 0x00080000 /* Flexible Filter 3 Enable */ |
| #define E1000_WUFC_ALL_FILTERS 0x000F00FF /* Mask for all wakeup filters */ |
| #define E1000_WUFC_FLX_OFFSET 16 /* Offset to the Flexible Filters bits */ |
| #define E1000_WUFC_FLX_FILTERS 0x000F0000 /* Mask for the 4 flexible filters */ |
| |
| /* Wake Up Status */ |
| #define E1000_WUS_LNKC 0x00000001 /* Link Status Changed */ |
| #define E1000_WUS_MAG 0x00000002 /* Magic Packet Received */ |
| #define E1000_WUS_EX 0x00000004 /* Directed Exact Received */ |
| #define E1000_WUS_MC 0x00000008 /* Directed Multicast Received */ |
| #define E1000_WUS_BC 0x00000010 /* Broadcast Received */ |
| #define E1000_WUS_ARP 0x00000020 /* ARP Request Packet Received */ |
| #define E1000_WUS_IPV4 0x00000040 /* Directed IPv4 Packet Wakeup Received */ |
| #define E1000_WUS_IPV6 0x00000080 /* Directed IPv6 Packet Wakeup Received */ |
| #define E1000_WUS_FLX0 0x00010000 /* Flexible Filter 0 Match */ |
| #define E1000_WUS_FLX1 0x00020000 /* Flexible Filter 1 Match */ |
| #define E1000_WUS_FLX2 0x00040000 /* Flexible Filter 2 Match */ |
| #define E1000_WUS_FLX3 0x00080000 /* Flexible Filter 3 Match */ |
| #define E1000_WUS_FLX_FILTERS 0x000F0000 /* Mask for the 4 flexible filters */ |
| |
| /* Management Control */ |
| #define E1000_MANC_SMBUS_EN 0x00000001 /* SMBus Enabled - RO */ |
| #define E1000_MANC_ASF_EN 0x00000002 /* ASF Enabled - RO */ |
| #define E1000_MANC_R_ON_FORCE 0x00000004 /* Reset on Force TCO - RO */ |
| #define E1000_MANC_RMCP_EN 0x00000100 /* Enable RCMP 026Fh Filtering */ |
| #define E1000_MANC_0298_EN 0x00000200 /* Enable RCMP 0298h Filtering */ |
| #define E1000_MANC_IPV4_EN 0x00000400 /* Enable IPv4 */ |
| #define E1000_MANC_IPV6_EN 0x00000800 /* Enable IPv6 */ |
| #define E1000_MANC_SNAP_EN 0x00001000 /* Accept LLC/SNAP */ |
| #define E1000_MANC_ARP_EN 0x00002000 /* Enable ARP Request Filtering */ |
| #define E1000_MANC_NEIGHBOR_EN 0x00004000 /* Enable Neighbor Discovery |
| * Filtering */ |
| #define E1000_MANC_TCO_RESET 0x00010000 /* TCO Reset Occurred */ |
| #define E1000_MANC_RCV_TCO_EN 0x00020000 /* Receive TCO Packets Enabled */ |
| #define E1000_MANC_REPORT_STATUS 0x00040000 /* Status Reporting Enabled */ |
| #define E1000_MANC_SMB_REQ 0x01000000 /* SMBus Request */ |
| #define E1000_MANC_SMB_GNT 0x02000000 /* SMBus Grant */ |
| #define E1000_MANC_SMB_CLK_IN 0x04000000 /* SMBus Clock In */ |
| #define E1000_MANC_SMB_DATA_IN 0x08000000 /* SMBus Data In */ |
| #define E1000_MANC_SMB_DATA_OUT 0x10000000 /* SMBus Data Out */ |
| #define E1000_MANC_SMB_CLK_OUT 0x20000000 /* SMBus Clock Out */ |
| |
| #define E1000_MANC_SMB_DATA_OUT_SHIFT 28 /* SMBus Data Out Shift */ |
| #define E1000_MANC_SMB_CLK_OUT_SHIFT 29 /* SMBus Clock Out Shift */ |
| |
| /* Wake Up Packet Length */ |
| #define E1000_WUPL_LENGTH_MASK 0x0FFF /* Only the lower 12 bits are valid */ |
| |
| #define E1000_MDALIGN 4096 |
| |
| /* EEPROM Commands */ |
| #define EEPROM_READ_OPCODE 0x6 /* EERPOM read opcode */ |
| #define EEPROM_WRITE_OPCODE 0x5 /* EERPOM write opcode */ |
| #define EEPROM_ERASE_OPCODE 0x7 /* EERPOM erase opcode */ |
| #define EEPROM_EWEN_OPCODE 0x13 /* EERPOM erase/write enable */ |
| #define EEPROM_EWDS_OPCODE 0x10 /* EERPOM erast/write disable */ |
| |
| /* EEPROM Word Offsets */ |
| #define EEPROM_COMPAT 0x0003 |
| #define EEPROM_ID_LED_SETTINGS 0x0004 |
| #define EEPROM_INIT_CONTROL1_REG 0x000A |
| #define EEPROM_INIT_CONTROL2_REG 0x000F |
| #define EEPROM_FLASH_VERSION 0x0032 |
| #define EEPROM_CHECKSUM_REG 0x003F |
| |
| /* Word definitions for ID LED Settings */ |
| #define ID_LED_RESERVED_0000 0x0000 |
| #define ID_LED_RESERVED_FFFF 0xFFFF |
| #define ID_LED_DEFAULT ((ID_LED_OFF1_ON2 << 12) | \ |
| (ID_LED_OFF1_OFF2 << 8) | \ |
| (ID_LED_DEF1_DEF2 << 4) | \ |
| (ID_LED_DEF1_DEF2)) |
| #define ID_LED_DEF1_DEF2 0x1 |
| #define ID_LED_DEF1_ON2 0x2 |
| #define ID_LED_DEF1_OFF2 0x3 |
| #define ID_LED_ON1_DEF2 0x4 |
| #define ID_LED_ON1_ON2 0x5 |
| #define ID_LED_ON1_OFF2 0x6 |
| #define ID_LED_OFF1_DEF2 0x7 |
| #define ID_LED_OFF1_ON2 0x8 |
| #define ID_LED_OFF1_OFF2 0x9 |
| |
| /* Mask bits for fields in Word 0x03 of the EEPROM */ |
| #define EEPROM_COMPAT_SERVER 0x0400 |
| #define EEPROM_COMPAT_CLIENT 0x0200 |
| |
| /* Mask bits for fields in Word 0x0a of the EEPROM */ |
| #define EEPROM_WORD0A_ILOS 0x0010 |
| #define EEPROM_WORD0A_SWDPIO 0x01E0 |
| #define EEPROM_WORD0A_LRST 0x0200 |
| #define EEPROM_WORD0A_FD 0x0400 |
| #define EEPROM_WORD0A_66MHZ 0x0800 |
| |
| /* Mask bits for fields in Word 0x0f of the EEPROM */ |
| #define EEPROM_WORD0F_PAUSE_MASK 0x3000 |
| #define EEPROM_WORD0F_PAUSE 0x1000 |
| #define EEPROM_WORD0F_ASM_DIR 0x2000 |
| #define EEPROM_WORD0F_ANE 0x0800 |
| #define EEPROM_WORD0F_SWPDIO_EXT 0x00F0 |
| |
| /* For checksumming, the sum of all words in the EEPROM should equal 0xBABA. */ |
| #define EEPROM_SUM 0xBABA |
| |
| /* EEPROM Map defines (WORD OFFSETS)*/ |
| #define EEPROM_NODE_ADDRESS_BYTE_0 0 |
| #define EEPROM_PBA_BYTE_1 8 |
| |
| /* EEPROM Map Sizes (Byte Counts) */ |
| #define PBA_SIZE 4 |
| |
| /* Collision related configuration parameters */ |
| #define E1000_COLLISION_THRESHOLD 16 |
| #define E1000_CT_SHIFT 4 |
| #define E1000_COLLISION_DISTANCE 64 |
| #define E1000_FDX_COLLISION_DISTANCE E1000_COLLISION_DISTANCE |
| #define E1000_HDX_COLLISION_DISTANCE E1000_COLLISION_DISTANCE |
| #define E1000_GB_HDX_COLLISION_DISTANCE 512 |
| #define E1000_COLD_SHIFT 12 |
| |
| /* The number of Transmit and Receive Descriptors must be a multiple of 8 */ |
| #define REQ_TX_DESCRIPTOR_MULTIPLE 8 |
| #define REQ_RX_DESCRIPTOR_MULTIPLE 8 |
| |
| /* Default values for the transmit IPG register */ |
| #define DEFAULT_82542_TIPG_IPGT 10 |
| #define DEFAULT_82543_TIPG_IPGT_FIBER 9 |
| #define DEFAULT_82543_TIPG_IPGT_COPPER 8 |
| |
| #define E1000_TIPG_IPGT_MASK 0x000003FF |
| #define E1000_TIPG_IPGR1_MASK 0x000FFC00 |
| #define E1000_TIPG_IPGR2_MASK 0x3FF00000 |
| |
| #define DEFAULT_82542_TIPG_IPGR1 2 |
| #define DEFAULT_82543_TIPG_IPGR1 8 |
| #define E1000_TIPG_IPGR1_SHIFT 10 |
| |
| #define DEFAULT_82542_TIPG_IPGR2 10 |
| #define DEFAULT_82543_TIPG_IPGR2 6 |
| #define E1000_TIPG_IPGR2_SHIFT 20 |
| |
| #define E1000_TXDMAC_DPP 0x00000001 |
| |
| /* Adaptive IFS defines */ |
| #define TX_THRESHOLD_START 8 |
| #define TX_THRESHOLD_INCREMENT 10 |
| #define TX_THRESHOLD_DECREMENT 1 |
| #define TX_THRESHOLD_STOP 190 |
| #define TX_THRESHOLD_DISABLE 0 |
| #define TX_THRESHOLD_TIMER_MS 10000 |
| #define MIN_NUM_XMITS 1000 |
| #define IFS_MAX 80 |
| #define IFS_STEP 10 |
| #define IFS_MIN 40 |
| #define IFS_RATIO 4 |
| |
| /* PBA constants */ |
| #define E1000_PBA_16K 0x0010 /* 16KB, default TX allocation */ |
| #define E1000_PBA_24K 0x0018 |
| #define E1000_PBA_40K 0x0028 |
| #define E1000_PBA_48K 0x0030 /* 48KB, default RX allocation */ |
| |
| /* Flow Control Constants */ |
| #define FLOW_CONTROL_ADDRESS_LOW 0x00C28001 |
| #define FLOW_CONTROL_ADDRESS_HIGH 0x00000100 |
| #define FLOW_CONTROL_TYPE 0x8808 |
| |
| /* The historical defaults for the flow control values are given below. */ |
| #define FC_DEFAULT_HI_THRESH (0x8000) /* 32KB */ |
| #define FC_DEFAULT_LO_THRESH (0x4000) /* 16KB */ |
| #define FC_DEFAULT_TX_TIMER (0x100) /* ~130 us */ |
| |
| /* Flow Control High-Watermark: 43464 bytes */ |
| #define E1000_FC_HIGH_THRESH 0xA9C8 |
| /* Flow Control Low-Watermark: 43456 bytes */ |
| #define E1000_FC_LOW_THRESH 0xA9C0 |
| /* Flow Control Pause Time: 858 usec */ |
| #define E1000_FC_PAUSE_TIME 0x0680 |
| |
| /* PCIX Config space */ |
| #define PCIX_COMMAND_REGISTER 0xE6 |
| #define PCIX_STATUS_REGISTER_LO 0xE8 |
| #define PCIX_STATUS_REGISTER_HI 0xEA |
| |
| #define PCIX_COMMAND_MMRBC_MASK 0x000C |
| #define PCIX_COMMAND_MMRBC_SHIFT 0x2 |
| #define PCIX_STATUS_HI_MMRBC_MASK 0x0060 |
| #define PCIX_STATUS_HI_MMRBC_SHIFT 0x5 |
| #define PCIX_STATUS_HI_MMRBC_4K 0x3 |
| #define PCIX_STATUS_HI_MMRBC_2K 0x2 |
| |
| /* The number of bits that we need to shift right to move the "pause" |
| * bits from the EEPROM (bits 13:12) to the "pause" (bits 8:7) field |
| * in the TXCW register |
| */ |
| #define PAUSE_SHIFT 5 |
| |
| /* The number of bits that we need to shift left to move the "SWDPIO" |
| * bits from the EEPROM (bits 8:5) to the "SWDPIO" (bits 25:22) field |
| * in the CTRL register |
| */ |
| #define SWDPIO_SHIFT 17 |
| |
| /* The number of bits that we need to shift left to move the "SWDPIO_EXT" |
| * bits from the EEPROM word F (bits 7:4) to the bits 11:8 of The |
| * Extended CTRL register. |
| * in the CTRL register |
| */ |
| #define SWDPIO__EXT_SHIFT 4 |
| |
| /* The number of bits that we need to shift left to move the "ILOS" |
| * bit from the EEPROM (bit 4) to the "ILOS" (bit 7) field |
| * in the CTRL register |
| */ |
| #define ILOS_SHIFT 3 |
| |
| #define RECEIVE_BUFFER_ALIGN_SIZE (256) |
| |
| /* The number of milliseconds we wait for auto-negotiation to complete */ |
| #define LINK_UP_TIMEOUT 500 |
| |
| #define E1000_TX_BUFFER_SIZE ((uint32_t)1514) |
| |
| /* The carrier extension symbol, as received by the NIC. */ |
| #define CARRIER_EXTENSION 0x0F |
| |
| /* TBI_ACCEPT macro definition: |
| * |
| * This macro requires: |
| * adapter = a pointer to struct e1000_hw |
| * status = the 8 bit status field of the RX descriptor with EOP set |
| * error = the 8 bit error field of the RX descriptor with EOP set |
| * length = the sum of all the length fields of the RX descriptors that |
| * make up the current frame |
| * last_byte = the last byte of the frame DMAed by the hardware |
| * max_frame_length = the maximum frame length we want to accept. |
| * min_frame_length = the minimum frame length we want to accept. |
| * |
| * This macro is a conditional that should be used in the interrupt |
| * handler's Rx processing routine when RxErrors have been detected. |
| * |
| * Typical use: |
| * ... |
| * if (TBI_ACCEPT) { |
| * accept_frame = TRUE; |
| * e1000_tbi_adjust_stats(adapter, MacAddress); |
| * frame_length--; |
| * } else { |
| * accept_frame = FALSE; |
| * } |
| * ... |
| */ |
| |
| #define TBI_ACCEPT(adapter, status, errors, length, last_byte) \ |
| ((adapter)->tbi_compatibility_on && \ |
| (((errors) & E1000_RXD_ERR_FRAME_ERR_MASK) == E1000_RXD_ERR_CE) && \ |
| ((last_byte) == CARRIER_EXTENSION) && \ |
| (((status) & E1000_RXD_STAT_VP) ? \ |
| (((length) > ((adapter)->min_frame_size - VLAN_TAG_SIZE)) && \ |
| ((length) <= ((adapter)->max_frame_size + 1))) : \ |
| (((length) > (adapter)->min_frame_size) && \ |
| ((length) <= ((adapter)->max_frame_size + VLAN_TAG_SIZE + 1))))) |
| |
| /* Structures, enums, and macros for the PHY */ |
| |
| /* Bit definitions for the Management Data IO (MDIO) and Management Data |
| * Clock (MDC) pins in the Device Control Register. |
| */ |
| #define E1000_CTRL_PHY_RESET_DIR E1000_CTRL_SWDPIO0 |
| #define E1000_CTRL_PHY_RESET E1000_CTRL_SWDPIN0 |
| #define E1000_CTRL_MDIO_DIR E1000_CTRL_SWDPIO2 |
| #define E1000_CTRL_MDIO E1000_CTRL_SWDPIN2 |
| #define E1000_CTRL_MDC_DIR E1000_CTRL_SWDPIO3 |
| #define E1000_CTRL_MDC E1000_CTRL_SWDPIN3 |
| #define E1000_CTRL_PHY_RESET_DIR4 E1000_CTRL_EXT_SDP4_DIR |
| #define E1000_CTRL_PHY_RESET4 E1000_CTRL_EXT_SDP4_DATA |
| |
| /* PHY 1000 MII Register/Bit Definitions */ |
| /* PHY Registers defined by IEEE */ |
| #define PHY_CTRL 0x00 /* Control Register */ |
| #define PHY_STATUS 0x01 /* Status Regiser */ |
| #define PHY_ID1 0x02 /* Phy Id Reg (word 1) */ |
| #define PHY_ID2 0x03 /* Phy Id Reg (word 2) */ |
| #define PHY_AUTONEG_ADV 0x04 /* Autoneg Advertisement */ |
| #define PHY_LP_ABILITY 0x05 /* Link Partner Ability (Base Page) */ |
| #define PHY_AUTONEG_EXP 0x06 /* Autoneg Expansion Reg */ |
| #define PHY_NEXT_PAGE_TX 0x07 /* Next Page TX */ |
| #define PHY_LP_NEXT_PAGE 0x08 /* Link Partner Next Page */ |
| #define PHY_1000T_CTRL 0x09 /* 1000Base-T Control Reg */ |
| #define PHY_1000T_STATUS 0x0A /* 1000Base-T Status Reg */ |
| #define PHY_EXT_STATUS 0x0F /* Extended Status Reg */ |
| |
| /* M88E1000 Specific Registers */ |
| #define M88E1000_PHY_SPEC_CTRL 0x10 /* PHY Specific Control Register */ |
| #define M88E1000_PHY_SPEC_STATUS 0x11 /* PHY Specific Status Register */ |
| #define M88E1000_INT_ENABLE 0x12 /* Interrupt Enable Register */ |
| #define M88E1000_INT_STATUS 0x13 /* Interrupt Status Register */ |
| #define M88E1000_EXT_PHY_SPEC_CTRL 0x14 /* Extended PHY Specific Control */ |
| #define M88E1000_RX_ERR_CNTR 0x15 /* Receive Error Counter */ |
| |
| #define MAX_PHY_REG_ADDRESS 0x1F /* 5 bit address bus (0-0x1F) */ |
| |
| /* PHY Control Register */ |
| #define MII_CR_SPEED_SELECT_MSB 0x0040 /* bits 6,13: 10=1000, 01=100, 00=10 */ |
| #define MII_CR_COLL_TEST_ENABLE 0x0080 /* Collision test enable */ |
| #define MII_CR_FULL_DUPLEX 0x0100 /* FDX =1, half duplex =0 */ |
| #define MII_CR_RESTART_AUTO_NEG 0x0200 /* Restart auto negotiation */ |
| #define MII_CR_ISOLATE 0x0400 /* Isolate PHY from MII */ |
| #define MII_CR_POWER_DOWN 0x0800 /* Power down */ |
| #define MII_CR_AUTO_NEG_EN 0x1000 /* Auto Neg Enable */ |
| #define MII_CR_SPEED_SELECT_LSB 0x2000 /* bits 6,13: 10=1000, 01=100, 00=10 */ |
| #define MII_CR_LOOPBACK 0x4000 /* 0 = normal, 1 = loopback */ |
| #define MII_CR_RESET 0x8000 /* 0 = normal, 1 = PHY reset */ |
| |
| /* PHY Status Register */ |
| #define MII_SR_EXTENDED_CAPS 0x0001 /* Extended register capabilities */ |
| #define MII_SR_JABBER_DETECT 0x0002 /* Jabber Detected */ |
| #define MII_SR_LINK_STATUS 0x0004 /* Link Status 1 = link */ |
| #define MII_SR_AUTONEG_CAPS 0x0008 /* Auto Neg Capable */ |
| #define MII_SR_REMOTE_FAULT 0x0010 /* Remote Fault Detect */ |
| #define MII_SR_AUTONEG_COMPLETE 0x0020 /* Auto Neg Complete */ |
| #define MII_SR_PREAMBLE_SUPPRESS 0x0040 /* Preamble may be suppressed */ |
| #define MII_SR_EXTENDED_STATUS 0x0100 /* Ext. status info in Reg 0x0F */ |
| #define MII_SR_100T2_HD_CAPS 0x0200 /* 100T2 Half Duplex Capable */ |
| #define MII_SR_100T2_FD_CAPS 0x0400 /* 100T2 Full Duplex Capable */ |
| #define MII_SR_10T_HD_CAPS 0x0800 /* 10T Half Duplex Capable */ |
| #define MII_SR_10T_FD_CAPS 0x1000 /* 10T Full Duplex Capable */ |
| #define MII_SR_100X_HD_CAPS 0x2000 /* 100X Half Duplex Capable */ |
| #define MII_SR_100X_FD_CAPS 0x4000 /* 100X Full Duplex Capable */ |
| #define MII_SR_100T4_CAPS 0x8000 /* 100T4 Capable */ |
| |
| /* Autoneg Advertisement Register */ |
| #define NWAY_AR_SELECTOR_FIELD 0x0001 /* indicates IEEE 802.3 CSMA/CD */ |
| #define NWAY_AR_10T_HD_CAPS 0x0020 /* 10T Half Duplex Capable */ |
| #define NWAY_AR_10T_FD_CAPS 0x0040 /* 10T Full Duplex Capable */ |
| #define NWAY_AR_100TX_HD_CAPS 0x0080 /* 100TX Half Duplex Capable */ |
| #define NWAY_AR_100TX_FD_CAPS 0x0100 /* 100TX Full Duplex Capable */ |
| #define NWAY_AR_100T4_CAPS 0x0200 /* 100T4 Capable */ |
| #define NWAY_AR_PAUSE 0x0400 /* Pause operation desired */ |
| #define NWAY_AR_ASM_DIR 0x0800 /* Asymmetric Pause Direction bit */ |
| #define NWAY_AR_REMOTE_FAULT 0x2000 /* Remote Fault detected */ |
| #define NWAY_AR_NEXT_PAGE 0x8000 /* Next Page ability supported */ |
| |
| /* Link Partner Ability Register (Base Page) */ |
| #define NWAY_LPAR_SELECTOR_FIELD 0x0000 /* LP protocol selector field */ |
| #define NWAY_LPAR_10T_HD_CAPS 0x0020 /* LP is 10T Half Duplex Capable */ |
| #define NWAY_LPAR_10T_FD_CAPS 0x0040 /* LP is 10T Full Duplex Capable */ |
| #define NWAY_LPAR_100TX_HD_CAPS 0x0080 /* LP is 100TX Half Duplex Capable */ |
| #define NWAY_LPAR_100TX_FD_CAPS 0x0100 /* LP is 100TX Full Duplex Capable */ |
| #define NWAY_LPAR_100T4_CAPS 0x0200 /* LP is 100T4 Capable */ |
| #define NWAY_LPAR_PAUSE 0x0400 /* LP Pause operation desired */ |
| #define NWAY_LPAR_ASM_DIR 0x0800 /* LP Asymmetric Pause Direction bit */ |
| #define NWAY_LPAR_REMOTE_FAULT 0x2000 /* LP has detected Remote Fault */ |
| #define NWAY_LPAR_ACKNOWLEDGE 0x4000 /* LP has rx'd link code word */ |
| #define NWAY_LPAR_NEXT_PAGE 0x8000 /* Next Page ability supported */ |
| |
| /* Autoneg Expansion Register */ |
| #define NWAY_ER_LP_NWAY_CAPS 0x0001 /* LP has Auto Neg Capability */ |
| #define NWAY_ER_PAGE_RXD 0x0002 /* LP is 10T Half Duplex Capable */ |
| #define NWAY_ER_NEXT_PAGE_CAPS 0x0004 /* LP is 10T Full Duplex Capable */ |
| #define NWAY_ER_LP_NEXT_PAGE_CAPS 0x0008 /* LP is 100TX Half Duplex Capable */ |
| #define NWAY_ER_PAR_DETECT_FAULT 0x0100 /* LP is 100TX Full Duplex Capable */ |
| |
| /* Next Page TX Register */ |
| #define NPTX_MSG_CODE_FIELD 0x0001 /* NP msg code or unformatted data */ |
| #define NPTX_TOGGLE 0x0800 /* Toggles between exchanges |
| * of different NP |
| */ |
| #define NPTX_ACKNOWLDGE2 0x1000 /* 1 = will comply with msg |
| * 0 = cannot comply with msg |
| */ |
| #define NPTX_MSG_PAGE 0x2000 /* formatted(1)/unformatted(0) pg */ |
| #define NPTX_NEXT_PAGE 0x8000 /* 1 = addition NP will follow |
| * 0 = sending last NP |
| */ |
| |
| /* Link Partner Next Page Register */ |
| #define LP_RNPR_MSG_CODE_FIELD 0x0001 /* NP msg code or unformatted data */ |
| #define LP_RNPR_TOGGLE 0x0800 /* Toggles between exchanges |
| * of different NP |
| */ |
| #define LP_RNPR_ACKNOWLDGE2 0x1000 /* 1 = will comply with msg |
| * 0 = cannot comply with msg |
| */ |
| #define LP_RNPR_MSG_PAGE 0x2000 /* formatted(1)/unformatted(0) pg */ |
| #define LP_RNPR_ACKNOWLDGE 0x4000 /* 1 = ACK / 0 = NO ACK */ |
| #define LP_RNPR_NEXT_PAGE 0x8000 /* 1 = addition NP will follow |
| * 0 = sending last NP |
| */ |
| |
| /* 1000BASE-T Control Register */ |
| #define CR_1000T_ASYM_PAUSE 0x0080 /* Advertise asymmetric pause bit */ |
| #define CR_1000T_HD_CAPS 0x0100 /* Advertise 1000T HD capability */ |
| #define CR_1000T_FD_CAPS 0x0200 /* Advertise 1000T FD capability */ |
| #define CR_1000T_REPEATER_DTE 0x0400 /* 1=Repeater/switch device port */ |
| /* 0=DTE device */ |
| #define CR_1000T_MS_VALUE 0x0800 /* 1=Configure PHY as Master */ |
| /* 0=Configure PHY as Slave */ |
| #define CR_1000T_MS_ENABLE 0x1000 /* 1=Master/Slave manual config value */ |
| /* 0=Automatic Master/Slave config */ |
| #define CR_1000T_TEST_MODE_NORMAL 0x0000 /* Normal Operation */ |
| #define CR_1000T_TEST_MODE_1 0x2000 /* Transmit Waveform test */ |
| #define CR_1000T_TEST_MODE_2 0x4000 /* Master Transmit Jitter test */ |
| #define CR_1000T_TEST_MODE_3 0x6000 /* Slave Transmit Jitter test */ |
| #define CR_1000T_TEST_MODE_4 0x8000 /* Transmitter Distortion test */ |
| |
| /* 1000BASE-T Status Register */ |
| #define SR_1000T_IDLE_ERROR_CNT 0x00FF /* Num idle errors since last read */ |
| #define SR_1000T_ASYM_PAUSE_DIR 0x0100 /* LP asymmetric pause direction bit */ |
| #define SR_1000T_LP_HD_CAPS 0x0400 /* LP is 1000T HD capable */ |
| #define SR_1000T_LP_FD_CAPS 0x0800 /* LP is 1000T FD capable */ |
| #define SR_1000T_REMOTE_RX_STATUS 0x1000 /* Remote receiver OK */ |
| #define SR_1000T_LOCAL_RX_STATUS 0x2000 /* Local receiver OK */ |
| #define SR_1000T_MS_CONFIG_RES 0x4000 /* 1=Local TX is Master, 0=Slave */ |
| #define SR_1000T_MS_CONFIG_FAULT 0x8000 /* Master/Slave config fault */ |
| #define SR_1000T_REMOTE_RX_STATUS_SHIFT 12 |
| #define SR_1000T_LOCAL_RX_STATUS_SHIFT 13 |
| |
| /* Extended Status Register */ |
| #define IEEE_ESR_1000T_HD_CAPS 0x1000 /* 1000T HD capable */ |
| #define IEEE_ESR_1000T_FD_CAPS 0x2000 /* 1000T FD capable */ |
| #define IEEE_ESR_1000X_HD_CAPS 0x4000 /* 1000X HD capable */ |
| #define IEEE_ESR_1000X_FD_CAPS 0x8000 /* 1000X FD capable */ |
| |
| #define PHY_TX_POLARITY_MASK 0x0100 /* register 10h bit 8 (polarity bit) */ |
| #define PHY_TX_NORMAL_POLARITY 0 /* register 10h bit 8 (normal polarity) */ |
| |
| #define AUTO_POLARITY_DISABLE 0x0010 /* register 11h bit 4 */ |
| /* (0=enable, 1=disable) */ |
| |
| /* M88E1000 PHY Specific Control Register */ |
| #define M88E1000_PSCR_JABBER_DISABLE 0x0001 /* 1=Jabber Function disabled */ |
| #define M88E1000_PSCR_POLARITY_REVERSAL 0x0002 /* 1=Polarity Reversal enabled */ |
| #define M88E1000_PSCR_SQE_TEST 0x0004 /* 1=SQE Test enabled */ |
| #define M88E1000_PSCR_CLK125_DISABLE 0x0010 /* 1=CLK125 low, |
| * 0=CLK125 toggling |
| */ |
| #define M88E1000_PSCR_MDI_MANUAL_MODE 0x0000 /* MDI Crossover Mode bits 6:5 */ |
| /* Manual MDI configuration */ |
| #define M88E1000_PSCR_MDIX_MANUAL_MODE 0x0020 /* Manual MDIX configuration */ |
| #define M88E1000_PSCR_AUTO_X_1000T 0x0040 /* 1000BASE-T: Auto crossover, |
| * 100BASE-TX/10BASE-T: |
| * MDI Mode |
| */ |
| #define M88E1000_PSCR_AUTO_X_MODE 0x0060 /* Auto crossover enabled |
| * all speeds. |
| */ |
| #define M88E1000_PSCR_10BT_EXT_DIST_ENABLE 0x0080 |
| /* 1=Enable Extended 10BASE-T distance |
| * (Lower 10BASE-T RX Threshold) |
| * 0=Normal 10BASE-T RX Threshold */ |
| #define M88E1000_PSCR_MII_5BIT_ENABLE 0x0100 |
| /* 1=5-Bit interface in 100BASE-TX |
| * 0=MII interface in 100BASE-TX */ |
| #define M88E1000_PSCR_SCRAMBLER_DISABLE 0x0200 /* 1=Scrambler disable */ |
| #define M88E1000_PSCR_FORCE_LINK_GOOD 0x0400 /* 1=Force link good */ |
| #define M88E1000_PSCR_ASSERT_CRS_ON_TX 0x0800 /* 1=Assert CRS on Transmit */ |
| |
| #define M88E1000_PSCR_POLARITY_REVERSAL_SHIFT 1 |
| #define M88E1000_PSCR_AUTO_X_MODE_SHIFT 5 |
| #define M88E1000_PSCR_10BT_EXT_DIST_ENABLE_SHIFT 7 |
| |
| /* M88E1000 PHY Specific Status Register */ |
| #define M88E1000_PSSR_JABBER 0x0001 /* 1=Jabber */ |
| #define M88E1000_PSSR_REV_POLARITY 0x0002 /* 1=Polarity reversed */ |
| #define M88E1000_PSSR_MDIX 0x0040 /* 1=MDIX; 0=MDI */ |
| #define M88E1000_PSSR_CABLE_LENGTH 0x0380 /* 0=<50M;1=50-80M;2=80-110M; |
| * 3=110-140M;4=>140M */ |
| #define M88E1000_PSSR_LINK 0x0400 /* 1=Link up, 0=Link down */ |
| #define M88E1000_PSSR_SPD_DPLX_RESOLVED 0x0800 /* 1=Speed & Duplex resolved */ |
| #define M88E1000_PSSR_PAGE_RCVD 0x1000 /* 1=Page received */ |
| #define M88E1000_PSSR_DPLX 0x2000 /* 1=Duplex 0=Half Duplex */ |
| #define M88E1000_PSSR_SPEED 0xC000 /* Speed, bits 14:15 */ |
| #define M88E1000_PSSR_10MBS 0x0000 /* 00=10Mbs */ |
| #define M88E1000_PSSR_100MBS 0x4000 /* 01=100Mbs */ |
| #define M88E1000_PSSR_1000MBS 0x8000 /* 10=1000Mbs */ |
| |
| #define M88E1000_PSSR_REV_POLARITY_SHIFT 1 |
| #define M88E1000_PSSR_MDIX_SHIFT 6 |
| #define M88E1000_PSSR_CABLE_LENGTH_SHIFT 7 |
| |
| /* M88E1000 Extended PHY Specific Control Register */ |
| #define M88E1000_EPSCR_FIBER_LOOPBACK 0x4000 /* 1=Fiber loopback */ |
| #define M88E1000_EPSCR_DOWN_NO_IDLE 0x8000 /* 1=Lost lock detect enabled. |
| * Will assert lost lock and bring |
| * link down if idle not seen |
| * within 1ms in 1000BASE-T |
| */ |
| /* Number of times we will attempt to autonegotiate before downshifting if we |
| * are the master */ |
| #define M88E1000_EPSCR_MASTER_DOWNSHIFT_MASK 0x0C00 |
| #define M88E1000_EPSCR_MASTER_DOWNSHIFT_1X 0x0000 |
| #define M88E1000_EPSCR_MASTER_DOWNSHIFT_2X 0x0400 |
| #define M88E1000_EPSCR_MASTER_DOWNSHIFT_3X 0x0800 |
| #define M88E1000_EPSCR_MASTER_DOWNSHIFT_4X 0x0C00 |
| /* Number of times we will attempt to autonegotiate before downshifting if we |
| * are the slave */ |
| #define M88E1000_EPSCR_SLAVE_DOWNSHIFT_MASK 0x0300 |
| #define M88E1000_EPSCR_SLAVE_DOWNSHIFT_DIS 0x0000 |
| #define M88E1000_EPSCR_SLAVE_DOWNSHIFT_1X 0x0100 |
| #define M88E1000_EPSCR_SLAVE_DOWNSHIFT_2X 0x0200 |
| #define M88E1000_EPSCR_SLAVE_DOWNSHIFT_3X 0x0300 |
| #define M88E1000_EPSCR_TX_CLK_2_5 0x0060 /* 2.5 MHz TX_CLK */ |
| #define M88E1000_EPSCR_TX_CLK_25 0x0070 /* 25 MHz TX_CLK */ |
| #define M88E1000_EPSCR_TX_CLK_0 0x0000 /* NO TX_CLK */ |
| |
| /* Bit definitions for valid PHY IDs. */ |
| #define M88E1000_E_PHY_ID 0x01410C50 |
| #define M88E1000_I_PHY_ID 0x01410C30 |
| #define M88E1011_I_PHY_ID 0x01410C20 |
| #define M88E1000_12_PHY_ID M88E1000_E_PHY_ID |
| #define M88E1000_14_PHY_ID M88E1000_E_PHY_ID |
| |
| /* Miscellaneous PHY bit definitions. */ |
| #define PHY_PREAMBLE 0xFFFFFFFF |
| #define PHY_SOF 0x01 |
| #define PHY_OP_READ 0x02 |
| #define PHY_OP_WRITE 0x01 |
| #define PHY_TURNAROUND 0x02 |
| #define PHY_PREAMBLE_SIZE 32 |
| #define MII_CR_SPEED_1000 0x0040 |
| #define MII_CR_SPEED_100 0x2000 |
| #define MII_CR_SPEED_10 0x0000 |
| #define E1000_PHY_ADDRESS 0x01 |
| #define PHY_AUTO_NEG_TIME 45 /* 4.5 Seconds */ |
| #define PHY_FORCE_TIME 20 /* 2.0 Seconds */ |
| #define PHY_REVISION_MASK 0xFFFFFFF0 |
| #define DEVICE_SPEED_MASK 0x00000300 /* Device Ctrl Reg Speed Mask */ |
| #define REG4_SPEED_MASK 0x01E0 |
| #define REG9_SPEED_MASK 0x0300 |
| #define ADVERTISE_10_HALF 0x0001 |
| #define ADVERTISE_10_FULL 0x0002 |
| #define ADVERTISE_100_HALF 0x0004 |
| #define ADVERTISE_100_FULL 0x0008 |
| #define ADVERTISE_1000_HALF 0x0010 |
| #define ADVERTISE_1000_FULL 0x0020 |
| #define AUTONEG_ADVERTISE_SPEED_DEFAULT 0x002F /* Everything but 1000-Half */ |
| |
| #endif /* _E1000_HW_H_ */ |