| /* |
| * U-boot - stamp.c STAMP board specific routines |
| * |
| * Copyright (c) 2005 blackfin.uclinux.org |
| * |
| * (C) Copyright 2000-2004 |
| * Wolfgang Denk, DENX Software Engineering, wd@denx.de. |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| #include <common.h> |
| #include <asm/mem_init.h> |
| #include "stamp.h" |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| #define STATUS_LED_OFF 0 |
| #define STATUS_LED_ON 1 |
| |
| #ifdef CONFIG_SHOW_BOOT_PROGRESS |
| # define SHOW_BOOT_PROGRESS(arg) show_boot_progress(arg) |
| #else |
| # define SHOW_BOOT_PROGRESS(arg) |
| #endif |
| |
| int checkboard (void) |
| { |
| printf ("CPU: ADSP BF533 Rev.: 0.%d\n", *pCHIPID >> 28); |
| printf ("Board: ADI BF533 Stamp board\n"); |
| printf (" Support: http://blackfin.uclinux.org/\n"); |
| printf (" Richard Klingler <richard@uclinux.net>\n"); |
| return 0; |
| } |
| |
| long int initdram (int board_type) |
| { |
| #ifdef DEBUG |
| printf ("SDRAM attributes:\n"); |
| printf (" tRCD:%d Cycles; tRP:%d Cycles; tRAS:%d Cycles; tWR:%d Cycles; " |
| "CAS Latency:%d cycles\n", |
| (SDRAM_tRCD >> 15), |
| (SDRAM_tRP >> 11), |
| (SDRAM_tRAS >> 6), |
| (SDRAM_tWR >> 19), |
| (SDRAM_CL >> 2)); |
| printf ("SDRAM Begin: 0x%x\n", CFG_SDRAM_BASE); |
| printf ("Bank size = %d MB\n", 128); |
| #endif |
| gd->bd->bi_memstart = CFG_SDRAM_BASE; |
| gd->bd->bi_memsize = CFG_MAX_RAM_SIZE; |
| return (gd->bd->bi_memsize); |
| } |
| |
| void swap_to (int device_id) |
| { |
| |
| if (device_id == ETHERNET) { |
| *pFIO_DIR = PF0; |
| asm ("ssync;"); |
| *pFIO_FLAG_S = PF0; |
| asm ("ssync;"); |
| } else if (device_id == FLASH) { |
| *pFIO_DIR = (PF4 | PF3 | PF2 | PF1 | PF0); |
| *pFIO_FLAG_S = (PF4 | PF3 | PF2); |
| *pFIO_MASKA_D = (PF8 | PF6 | PF5); |
| *pFIO_MASKB_D = (PF7); |
| *pFIO_POLAR = (PF8 | PF6 | PF5); |
| *pFIO_EDGE = (PF8 | PF7 | PF6 | PF5); |
| *pFIO_INEN = (PF8 | PF7 | PF6 | PF5); |
| *pFIO_FLAG_D = (PF4 | PF3 | PF2); |
| asm ("ssync;"); |
| } else { |
| printf ("Unknown bank to switch\n"); |
| } |
| |
| return; |
| } |
| |
| #if defined(CONFIG_MISC_INIT_R) |
| /* miscellaneous platform dependent initialisations */ |
| int misc_init_r (void) |
| { |
| int i; |
| int cf_stat = 0; |
| |
| /* Check whether CF card is inserted */ |
| *pFIO_EDGE = FIO_EDGE_CF_BITS; |
| *pFIO_POLAR = FIO_POLAR_CF_BITS; |
| for (i = 0; i < 0x300; i++) |
| asm ("nop;"); |
| |
| if ((*pFIO_FLAG_S) & CF_STAT_BITS) { |
| cf_stat = 0; |
| } else { |
| cf_stat = 1; |
| } |
| |
| *pFIO_EDGE = FIO_EDGE_BITS; |
| *pFIO_POLAR = FIO_POLAR_BITS; |
| |
| |
| if (cf_stat) { |
| printf ("Booting from COMPACT flash\n"); |
| |
| /* Set cycle time for CF */ |
| *(volatile unsigned long *) ambctl1 = CF_AMBCTL1VAL; |
| |
| for (i = 0; i < 0x1000; i++) |
| asm ("nop;"); |
| for (i = 0; i < 0x1000; i++) |
| asm ("nop;"); |
| for (i = 0; i < 0x1000; i++) |
| asm ("nop;"); |
| |
| serial_setbrg (); |
| ide_init (); |
| |
| setenv ("bootargs", ""); |
| setenv ("bootcmd", |
| "fatload ide 0:1 0x1000000 uImage-stamp;bootm 0x1000000;bootm 0x20100000"); |
| } else { |
| printf ("Booting from FLASH\n"); |
| } |
| |
| return 1; |
| } |
| #endif |
| |
| #ifdef CONFIG_STAMP_CF |
| |
| void cf_outb (unsigned char val, volatile unsigned char *addr) |
| { |
| /* |
| * Set PF1 PF0 respectively to 0 1 to divert address |
| * to the expansion memory banks |
| */ |
| *pFIO_FLAG_S = CF_PF0; |
| *pFIO_FLAG_C = CF_PF1; |
| asm ("ssync;"); |
| |
| *(addr) = val; |
| asm ("ssync;"); |
| |
| /* Setback PF1 PF0 to 0 0 to address external |
| * memory banks */ |
| *(volatile unsigned short *) pFIO_FLAG_C = CF_PF1_PF0; |
| asm ("ssync;"); |
| } |
| |
| unsigned char cf_inb (volatile unsigned char *addr) |
| { |
| volatile unsigned char c; |
| |
| *pFIO_FLAG_S = CF_PF0; |
| *pFIO_FLAG_C = CF_PF1; |
| asm ("ssync;"); |
| |
| c = *(addr); |
| asm ("ssync;"); |
| |
| *pFIO_FLAG_C = CF_PF1_PF0; |
| asm ("ssync;"); |
| |
| return c; |
| } |
| |
| void cf_insw (unsigned short *sect_buf, unsigned short *addr, int words) |
| { |
| int i; |
| |
| *pFIO_FLAG_S = CF_PF0; |
| *pFIO_FLAG_C = CF_PF1; |
| asm ("ssync;"); |
| |
| for (i = 0; i < words; i++) { |
| *(sect_buf + i) = *(addr); |
| asm ("ssync;"); |
| } |
| |
| *pFIO_FLAG_C = CF_PF1_PF0; |
| asm ("ssync;"); |
| } |
| |
| void cf_outsw (unsigned short *addr, unsigned short *sect_buf, int words) |
| { |
| int i; |
| |
| *pFIO_FLAG_S = CF_PF0; |
| *pFIO_FLAG_C = CF_PF1; |
| asm ("ssync;"); |
| |
| for (i = 0; i < words; i++) { |
| *(addr) = *(sect_buf + i); |
| asm ("ssync;"); |
| } |
| |
| *pFIO_FLAG_C = CF_PF1_PF0; |
| asm ("ssync;"); |
| } |
| #endif |
| |
| void stamp_led_set (int LED1, int LED2, int LED3) |
| { |
| *pFIO_INEN &= ~(PF2 | PF3 | PF4); |
| *pFIO_DIR |= (PF2 | PF3 | PF4); |
| |
| if (LED1 == STATUS_LED_OFF) |
| *pFIO_FLAG_S = PF2; |
| else |
| *pFIO_FLAG_C = PF2; |
| if (LED2 == STATUS_LED_OFF) |
| *pFIO_FLAG_S = PF3; |
| else |
| *pFIO_FLAG_C = PF3; |
| if (LED3 == STATUS_LED_OFF) |
| *pFIO_FLAG_S = PF4; |
| else |
| *pFIO_FLAG_C = PF4; |
| asm ("ssync;"); |
| } |
| |
| void show_boot_progress (int status) |
| { |
| switch (status) { |
| case 1: |
| stamp_led_set (STATUS_LED_OFF, STATUS_LED_OFF, STATUS_LED_ON); |
| break; |
| case 2: |
| stamp_led_set (STATUS_LED_OFF, STATUS_LED_ON, STATUS_LED_OFF); |
| break; |
| case 3: |
| stamp_led_set (STATUS_LED_OFF, STATUS_LED_ON, STATUS_LED_ON); |
| break; |
| case 4: |
| stamp_led_set (STATUS_LED_ON, STATUS_LED_OFF, STATUS_LED_OFF); |
| break; |
| case 5: |
| case 6: |
| stamp_led_set (STATUS_LED_ON, STATUS_LED_OFF, STATUS_LED_ON); |
| break; |
| case 7: |
| case 8: |
| stamp_led_set (STATUS_LED_ON, STATUS_LED_ON, STATUS_LED_OFF); |
| break; |
| case 9: |
| case 10: |
| case 11: |
| case 12: |
| case 13: |
| case 14: |
| case 15: |
| stamp_led_set (STATUS_LED_OFF, STATUS_LED_OFF, |
| STATUS_LED_OFF); |
| break; |
| default: |
| stamp_led_set (STATUS_LED_ON, STATUS_LED_ON, STATUS_LED_ON); |
| break; |
| } |
| } |