package/pkg-perl.mk - github/buildroot/buildroot - Gitiles

 ################################################################################
 # Perl package infrastructure
 #
 # This file implements an infrastructure that eases development of
 # package .mk files for Perl packages.
 #
 # See the Buildroot documentation for details on the usage of this
 # infrastructure
 #
 # In terms of implementation, this perl infrastructure requires
 # the .mk file to only specify metadata information about the
 # package: name, version, download URL, etc.
 #
 # We still allow the package .mk file to override what the different
 # steps are doing, if needed. For example, if <PKG>_BUILD_CMDS is
 # already defined, it is used as the list of commands to perform to
 # build the package, instead of the default perl behaviour. The
 # package can also define some post operation hooks.
 #
 ################################################################################

 PERL_ARCHNAME = $(ARCH)-linux
 PERL_RUN = PERL5LIB= PERL_USE_UNSAFE_INC=1 $(HOST_DIR)/bin/perl

 ################################################################################
 # inner-perl-package -- defines how the configuration, compilation and
 # installation of a perl package should be done, implements a
 # few hooks to tune the build process for perl specifities and
 # calls the generic package infrastructure to generate the necessary
 # make targets
 #
 #  argument 1 is the lowercase package name
 #  argument 2 is the uppercase package name, including a HOST_ prefix
 #             for host packages
 #  argument 3 is the uppercase package name, without the HOST_ prefix
 #             for host packages
 #  argument 4 is the type (target or host)
 ################################################################################

 define inner-perl-package

 # Target packages need both the perl interpreter on the target (for
 # runtime) and the perl interpreter on the host (for
 # compilation). However, host packages only need the perl
 # interpreter on the host.
 ifeq ($(4),target)
 $(2)_DEPENDENCIES += host-perl perl
 else
 $(2)_DEPENDENCIES += host-perl
 endif

 # From http://perldoc.perl.org/CPAN.html#Config-Variables - prefer_installer
 #       legal values are MB and EUMM: if a module comes
 #       with both a Makefile.PL and a Build.PL, use the
 #       former (EUMM) or the latter (MB); if the module
 #       comes with only one of the two, that one will be
 #       used no matter the setting
 $(2)_PREFER_INSTALLER ?= MB

 #
 # Configure step. Only define it if not already defined by the package
 # .mk file. And take care of the differences between host and target
 # packages.
 #
 ifndef $(2)_CONFIGURE_CMDS
 ifeq ($(4),target)

 # Configure package for target
 define $(2)_CONFIGURE_CMDS
 	cd $$($$(PKG)_SRCDIR) && if [ -f Build.PL ] && [ $$($(2)_PREFER_INSTALLER) != "EUMM" ] ; then \
 		$$($(2)_CONF_ENV) \
 		PERL_MM_USE_DEFAULT=1 \
 		$$(PERL_RUN) Build.PL \
 			--config ar="$$(TARGET_AR)" \
 			--config full_ar="$$(TARGET_AR)" \
 			--config cc="$$(TARGET_CC)" \
 			--config ccflags="$$(TARGET_CFLAGS)" \
 			--config optimize=" " \
 			--config ld="$$(TARGET_CC)" \
 			--config lddlflags="-shared $$(TARGET_LDFLAGS)" \
 			--config ldflags="$$(TARGET_LDFLAGS)" \
 			--include_dirs $$(STAGING_DIR)/usr/lib/perl5/$$(PERL_VERSION)/$$(PERL_ARCHNAME)/CORE \
 			--destdir $$(TARGET_DIR) \
 			--installdirs vendor \
 			--install_path lib=/usr/lib/perl5/site_perl/$$(PERL_VERSION) \
 			--install_path arch=/usr/lib/perl5/site_perl/$$(PERL_VERSION)/$$(PERL_ARCHNAME) \
 			--install_path bin=/usr/bin \
 			--install_path script=/usr/bin \
 			--install_path bindoc=/usr/share/man/man1 \
 			--install_path libdoc=/usr/share/man/man3 \
 			$$($(2)_CONF_OPTS); \
 	else \
 		$$($(2)_CONF_ENV) \
 		PERL_MM_USE_DEFAULT=1 \
 		PERL_AUTOINSTALL=--skipdeps \
 		$$(PERL_RUN) Makefile.PL \
 			AR="$$(TARGET_AR)" \
 			FULL_AR="$$(TARGET_AR)" \
 			CC="$$(TARGET_CC)" \
 			CCFLAGS="$$(TARGET_CFLAGS)" \
 			OPTIMIZE=" " \
 			LD="$$(TARGET_CC)" \
 			LDDLFLAGS="-shared $$(TARGET_LDFLAGS)" \
 			LDFLAGS="$$(TARGET_LDFLAGS)" \
 			DESTDIR=$$(TARGET_DIR) \
 			INSTALLDIRS=vendor \
 			INSTALLVENDORLIB=/usr/lib/perl5/site_perl/$$(PERL_VERSION) \
 			INSTALLVENDORARCH=/usr/lib/perl5/site_perl/$$(PERL_VERSION)/$$(PERL_ARCHNAME) \
 			INSTALLVENDORBIN=/usr/bin \
 			INSTALLVENDORSCRIPT=/usr/bin \
 			INSTALLVENDORMAN1DIR=/usr/share/man/man1 \
 			INSTALLVENDORMAN3DIR=/usr/share/man/man3 \
 			$$($(2)_CONF_OPTS); \
 	fi
 endef
 else

 # Configure package for host
 define $(2)_CONFIGURE_CMDS
 	cd $$($$(PKG)_SRCDIR) && if [ -f Build.PL ] && [ $$($(2)_PREFER_INSTALLER) != "EUMM" ] ; then \
 		$$($(2)_CONF_ENV) \
 		PERL_MM_USE_DEFAULT=1 \
 		$$(PERL_RUN) Build.PL \
 			$$($(2)_CONF_OPTS); \
 	else \
 		$$($(2)_CONF_ENV) \
 		PERL_MM_USE_DEFAULT=1 \
 		PERL_AUTOINSTALL=--skipdeps \
 		$$(PERL_RUN) Makefile.PL \
 			$$($(2)_CONF_OPTS); \
 	fi
 endef
 endif
 endif

 #
 # Build step. Only define it if not already defined by the package .mk
 # file. And take care of the differences between host and target
 # packages.
 #
 ifndef $(2)_BUILD_CMDS
 ifeq ($(4),target)

 # Build package for target
 define $(2)_BUILD_CMDS
 	cd $$($$(PKG)_SRCDIR) && if [ -f Build.PL ] && [ $$($(2)_PREFER_INSTALLER) != "EUMM" ] ; then \
 		$$(PERL_RUN) Build $$($(2)_BUILD_OPTS) build; \
 	else \
 		$$(MAKE1) \
 			PERL_INC=$$(STAGING_DIR)/usr/lib/perl5/$$(PERL_VERSION)/$$(PERL_ARCHNAME)/CORE \
 			FIXIN=: \
 			$$($(2)_BUILD_OPTS) pure_all; \
 	fi
 endef
 else

 # Build package for host
 define $(2)_BUILD_CMDS
 	cd $$($$(PKG)_SRCDIR) && if [ -f Build.PL ] && [ $$($(2)_PREFER_INSTALLER) != "EUMM" ] ; then \
 		$$(PERL_RUN) Build $$($(2)_BUILD_OPTS) build; \
 	else \
 		$$(MAKE1) $$($(2)_BUILD_OPTS) pure_all; \
 	fi
 endef
 endif
 endif

 #
 # Host installation step. Only define it if not already defined by the
 # package .mk file.
 #
 ifndef $(2)_INSTALL_CMDS
 define $(2)_INSTALL_CMDS
 	cd $$($$(PKG)_SRCDIR) && if [ -f Build.PL ] && [ $$($(2)_PREFER_INSTALLER) != "EUMM" ] ; then \
 		$$(PERL_RUN) Build $$($(2)_INSTALL_TARGET_OPTS) install; \
 	else \
 		$$(MAKE1) $$($(2)_INSTALL_TARGET_OPTS) pure_install; \
 	fi
 endef
 endif

 #
 # Target installation step. Only define it if not already defined by
 # the package .mk file.
 #
 ifndef $(2)_INSTALL_TARGET_CMDS
 define $(2)_INSTALL_TARGET_CMDS
 	cd $$($$(PKG)_SRCDIR) && if [ -f Build.PL ] && [ $$($(2)_PREFER_INSTALLER) != "EUMM" ] ; then \
 		$$(PERL_RUN) Build $$($(2)_INSTALL_TARGET_OPTS) install; \
 	else \
 		$$(MAKE1) $$($(2)_INSTALL_TARGET_OPTS) pure_install; \
 	fi
 endef
 endif

 # Call the generic package infrastructure to generate the necessary
 # make targets
 $(call inner-generic-package,$(1),$(2),$(3),$(4))

 endef

 ################################################################################
 # perl-package -- the target generator macro for Perl packages
 ################################################################################

 perl-package = $(call inner-perl-package,$(pkgname),$(call UPPERCASE,$(pkgname)),$(call UPPERCASE,$(pkgname)),target)
 host-perl-package = $(call inner-perl-package,host-$(pkgname),$(call UPPERCASE,host-$(pkgname)),$(call UPPERCASE,$(pkgname)),host)
	################################################################################
	# Perl package infrastructure
	#
	# This file implements an infrastructure that eases development of
	# package .mk files for Perl packages.
	#
	# See the Buildroot documentation for details on the usage of this
	# infrastructure
	#
	# In terms of implementation, this perl infrastructure requires
	# the .mk file to only specify metadata information about the
	# package: name, version, download URL, etc.
	#
	# We still allow the package .mk file to override what the different
	# steps are doing, if needed. For example, if <PKG>_BUILD_CMDS is
	# already defined, it is used as the list of commands to perform to
	# build the package, instead of the default perl behaviour. The
	# package can also define some post operation hooks.
	#
	################################################################################

	PERL_ARCHNAME = $(ARCH)-linux
	PERL_RUN = PERL5LIB= PERL_USE_UNSAFE_INC=1 $(HOST_DIR)/bin/perl

	################################################################################
	# inner-perl-package -- defines how the configuration, compilation and
	# installation of a perl package should be done, implements a
	# few hooks to tune the build process for perl specifities and
	# calls the generic package infrastructure to generate the necessary
	# make targets
	#
	# argument 1 is the lowercase package name
	# argument 2 is the uppercase package name, including a HOST_ prefix
	# for host packages
	# argument 3 is the uppercase package name, without the HOST_ prefix
	# for host packages
	# argument 4 is the type (target or host)
	################################################################################

	define inner-perl-package

	# Target packages need both the perl interpreter on the target (for
	# runtime) and the perl interpreter on the host (for
	# compilation). However, host packages only need the perl
	# interpreter on the host.
	ifeq ($(4),target)
	$(2)_DEPENDENCIES += host-perl perl
	else
	$(2)_DEPENDENCIES += host-perl
	endif

	# From http://perldoc.perl.org/CPAN.html#Config-Variables - prefer_installer
	# legal values are MB and EUMM: if a module comes
	# with both a Makefile.PL and a Build.PL, use the
	# former (EUMM) or the latter (MB); if the module
	# comes with only one of the two, that one will be
	# used no matter the setting
	$(2)_PREFER_INSTALLER ?= MB

	#
	# Configure step. Only define it if not already defined by the package
	# .mk file. And take care of the differences between host and target
	# packages.
	#
	ifndef $(2)_CONFIGURE_CMDS
	ifeq ($(4),target)

	# Configure package for target
	define $(2)_CONFIGURE_CMDS
	cd $$($$(PKG)_SRCDIR) && if [ -f Build.PL ] && [ $$($(2)_PREFER_INSTALLER) != "EUMM" ] ; then \
	$$($(2)_CONF_ENV) \
	PERL_MM_USE_DEFAULT=1 \
	$$(PERL_RUN) Build.PL \
	--config ar="$$(TARGET_AR)" \
	--config full_ar="$$(TARGET_AR)" \
	--config cc="$$(TARGET_CC)" \
	--config ccflags="$$(TARGET_CFLAGS)" \
	--config optimize=" " \
	--config ld="$$(TARGET_CC)" \
	--config lddlflags="-shared $$(TARGET_LDFLAGS)" \
	--config ldflags="$$(TARGET_LDFLAGS)" \
	--include_dirs $$(STAGING_DIR)/usr/lib/perl5/$$(PERL_VERSION)/$$(PERL_ARCHNAME)/CORE \
	--destdir $$(TARGET_DIR) \
	--installdirs vendor \
	--install_path lib=/usr/lib/perl5/site_perl/$$(PERL_VERSION) \
	--install_path arch=/usr/lib/perl5/site_perl/$$(PERL_VERSION)/$$(PERL_ARCHNAME) \
	--install_path bin=/usr/bin \
	--install_path script=/usr/bin \
	--install_path bindoc=/usr/share/man/man1 \
	--install_path libdoc=/usr/share/man/man3 \
	$$($(2)_CONF_OPTS); \
	else \
	$$($(2)_CONF_ENV) \
	PERL_MM_USE_DEFAULT=1 \
	PERL_AUTOINSTALL=--skipdeps \
	$$(PERL_RUN) Makefile.PL \
	AR="$$(TARGET_AR)" \
	FULL_AR="$$(TARGET_AR)" \
	CC="$$(TARGET_CC)" \
	CCFLAGS="$$(TARGET_CFLAGS)" \
	OPTIMIZE=" " \
	LD="$$(TARGET_CC)" \
	LDDLFLAGS="-shared $$(TARGET_LDFLAGS)" \
	LDFLAGS="$$(TARGET_LDFLAGS)" \
	DESTDIR=$$(TARGET_DIR) \
	INSTALLDIRS=vendor \
	INSTALLVENDORLIB=/usr/lib/perl5/site_perl/$$(PERL_VERSION) \
	INSTALLVENDORARCH=/usr/lib/perl5/site_perl/$$(PERL_VERSION)/$$(PERL_ARCHNAME) \
	INSTALLVENDORBIN=/usr/bin \
	INSTALLVENDORSCRIPT=/usr/bin \
	INSTALLVENDORMAN1DIR=/usr/share/man/man1 \
	INSTALLVENDORMAN3DIR=/usr/share/man/man3 \
	$$($(2)_CONF_OPTS); \
	fi
	endef
	else

	# Configure package for host
	define $(2)_CONFIGURE_CMDS
	cd $$($$(PKG)_SRCDIR) && if [ -f Build.PL ] && [ $$($(2)_PREFER_INSTALLER) != "EUMM" ] ; then \
	$$($(2)_CONF_ENV) \
	PERL_MM_USE_DEFAULT=1 \
	$$(PERL_RUN) Build.PL \
	$$($(2)_CONF_OPTS); \
	else \
	$$($(2)_CONF_ENV) \
	PERL_MM_USE_DEFAULT=1 \
	PERL_AUTOINSTALL=--skipdeps \
	$$(PERL_RUN) Makefile.PL \
	$$($(2)_CONF_OPTS); \
	fi
	endef
	endif
	endif

	#
	# Build step. Only define it if not already defined by the package .mk
	# file. And take care of the differences between host and target
	# packages.
	#
	ifndef $(2)_BUILD_CMDS
	ifeq ($(4),target)

	# Build package for target
	define $(2)_BUILD_CMDS
	cd $$($$(PKG)_SRCDIR) && if [ -f Build.PL ] && [ $$($(2)_PREFER_INSTALLER) != "EUMM" ] ; then \
	$$(PERL_RUN) Build $$($(2)_BUILD_OPTS) build; \
	else \
	$$(MAKE1) \
	PERL_INC=$$(STAGING_DIR)/usr/lib/perl5/$$(PERL_VERSION)/$$(PERL_ARCHNAME)/CORE \
	FIXIN=: \
	$$($(2)_BUILD_OPTS) pure_all; \
	fi
	endef
	else

	# Build package for host
	define $(2)_BUILD_CMDS
	cd $$($$(PKG)_SRCDIR) && if [ -f Build.PL ] && [ $$($(2)_PREFER_INSTALLER) != "EUMM" ] ; then \
	$$(PERL_RUN) Build $$($(2)_BUILD_OPTS) build; \
	else \
	$$(MAKE1) $$($(2)_BUILD_OPTS) pure_all; \
	fi
	endef
	endif
	endif

	#
	# Host installation step. Only define it if not already defined by the
	# package .mk file.
	#
	ifndef $(2)_INSTALL_CMDS
	define $(2)_INSTALL_CMDS
	cd $$($$(PKG)_SRCDIR) && if [ -f Build.PL ] && [ $$($(2)_PREFER_INSTALLER) != "EUMM" ] ; then \
	$$(PERL_RUN) Build $$($(2)_INSTALL_TARGET_OPTS) install; \
	else \
	$$(MAKE1) $$($(2)_INSTALL_TARGET_OPTS) pure_install; \
	fi
	endef
	endif

	#
	# Target installation step. Only define it if not already defined by
	# the package .mk file.
	#
	ifndef $(2)_INSTALL_TARGET_CMDS
	define $(2)_INSTALL_TARGET_CMDS
	cd $$($$(PKG)_SRCDIR) && if [ -f Build.PL ] && [ $$($(2)_PREFER_INSTALLER) != "EUMM" ] ; then \
	$$(PERL_RUN) Build $$($(2)_INSTALL_TARGET_OPTS) install; \
	else \
	$$(MAKE1) $$($(2)_INSTALL_TARGET_OPTS) pure_install; \
	fi
	endef
	endif

	# Call the generic package infrastructure to generate the necessary
	# make targets
	$(call inner-generic-package,$(1),$(2),$(3),$(4))

	endef

	################################################################################
	# perl-package -- the target generator macro for Perl packages
	################################################################################

	perl-package = $(call inner-perl-package,$(pkgname),$(call UPPERCASE,$(pkgname)),$(call UPPERCASE,$(pkgname)),target)
	host-perl-package = $(call inner-perl-package,host-$(pkgname),$(call UPPERCASE,host-$(pkgname)),$(call UPPERCASE,$(pkgname)),host)