| # |
| # Config.in.legacy - support for backward compatibility |
| # |
| # When an existing Config.in symbol is removed, it should be added again in this |
| # file, and take appropriate action to approximate backward compatibility. If |
| # there is an equivalent (set of) new symbols, these can just be select'ed by |
| # the old symbol. This makes sure that running 'make oldconfig' will make things |
| # "just work" when upgrading to a new buildroot version. If the change is too |
| # fundamental and cannot be fixed by a simple select, then the old symbol should |
| # select BR2_LEGACY. If that symbol is set, the build will issue an error. |
| # |
| # When adding legacy symbols to this file, add them to the front. The oldest |
| # symbols will be removed again after about two years. |
| # |
| # The symbol should be copied as-is from the place where it was previously |
| # defined, but the help text should be removed or replaced with something that |
| # explains how to fix it. |
| |
| config BR2_LEGACY |
| bool |
| help |
| This option is selected automatically when your old .config uses an |
| option that no longer exists in current buildroot. In that case, the |
| build will fail. Look for config options which are selected in the |
| menu below: they no longer exist and should be replaced by something |
| else. |
| |
| # This comment fits exactly in a 80-column display |
| comment "Legacy detected: check the content of the menu below" |
| depends on BR2_LEGACY |
| |
| menu "Legacy config options" |
| |
| if BR2_LEGACY |
| comment "Your old configuration uses legacy options that no " |
| comment "longer exist in buildroot. " |
| comment "Please look at the options which have been selected " |
| comment "and read their help text. " |
| comment "As long as these options stay selected, the build " |
| comment "will fail. " |
| comment "Note: at some point in the future, the oldest legacy" |
| comment "options will be removed, and configuration files " |
| comment "that still have those options set, will fail to " |
| comment "build, or run, in unpredictable ways. " |
| endif |
| |
| ############################################################################### |
| comment "Legacy options removed in 2013.08" |
| |
| config BR2_PACKAGE_DOSFSTOOLS_DOSFSCK |
| bool "dosfstools dosfsck renamed to fsck.fat" |
| select BR2_LEGACY |
| select BR2_PACKAGE_DOSFSTOOLS_FSCK_FAT |
| help |
| dosfsck was renamed upstream to fsck.fat for consistency. |
| |
| config BR2_PACKAGE_DOSFSTOOLS_DOSFSLABEL |
| bool "dosfstools dosfslabel renamed to fatlabel" |
| select BR2_LEGACY |
| select BR2_PACKAGE_DOSFSTOOLS_FATLABEL |
| help |
| doslabel was renamed upstream to fatlabel for consistency. |
| |
| config BR2_PACKAGE_DOSFSTOOLS_MKDOSFS |
| bool "dosfstools mkdosfs renamed to mkfs.fat" |
| select BR2_LEGACY |
| select BR2_PACKAGE_DOSFSTOOLS_MKFS_FAT |
| help |
| mkdosfs was renamed upstream to mkfs.fat for consistency. |
| |
| config BR2_ELF2FLT |
| bool "the elf2flt option has been renamed" |
| select BR2_LEGACY |
| help |
| The BR2_ELF2FLT option has been renamed to |
| BR2_PACKAGE_HOST_ELF2FLT due to the conversion of elf2flt to |
| the package infrastructure. |
| |
| config BR2_VFP_FLOAT |
| bool "the ARM VFP floating point option has been renamed" |
| select BR2_LEGACY |
| help |
| Due to a major refactoring of the floating-point handling of |
| the ARM architecture support, the BR2_VFP_FLOAT option has |
| been replaced with a choice of options that allows to select |
| between various VFP versions/capabilities. |
| |
| ############################################################################### |
| comment "Legacy options removed in 2013.05" |
| |
| config BR2_PACKAGE_LINUX_FIRMWARE_RTL_8192 |
| bool "Realtek 8192 replaced by Realtek 81xx" |
| select BR2_LEGACY |
| select BR2_PACKAGE_LINUX_FIRMWARE_RTL_81XX |
| help |
| Now covers the whole Realtek 81xx familly: 8188/8192. |
| |
| config BR2_PACKAGE_LINUX_FIRMWARE_RTL_8712 |
| bool "Realtek 8712 replaced by Realtek 87xx" |
| select BR2_LEGACY |
| select BR2_PACKAGE_LINUX_FIRMWARE_RTL_87XX |
| help |
| Now covers the whole Realtek 87xx familly: 8712/8723. |
| |
| ############################################################################### |
| comment "Legacy options removed in 2013.02" |
| |
| config BR2_sa110 |
| bool "sa110 ARM target switched to strongarm" |
| select BR2_LEGACY |
| select BR2_strongarm |
| help |
| The SA110 is the same as a generic StrongARM, it just differs |
| in speed, peripherals and cache. |
| |
| config BR2_sa1100 |
| bool "sa1100 ARM target switched to strongarm" |
| select BR2_LEGACY |
| select BR2_strongarm |
| help |
| The SA1100 is the same as a generic StrongARM, it just differs |
| in speed, peripherals and cache. |
| |
| config BR2_PACKAGE_GDISK |
| bool "gdisk has been replaced by gptfdisk" |
| select BR2_LEGACY |
| select BR2_PACKAGE_GPTFDISK |
| help |
| The option has been renamed BR2_PACKAGE_GPTFDISK. |
| |
| config BR2_PACKAGE_GDISK_GDISK |
| bool "gdisk tool from gdisk has been replaced by gdisk in gptfdisk" |
| select BR2_LEGACY |
| select BR2_PACKAGE_GPTFDISK |
| select BR2_PACKAGE_GPTFDISK_GDISK |
| help |
| The option has been renamed BR2_PACKAGE_GPTFDISK_GDISK. |
| |
| config BR2_PACKAGE_GDISK_SGDISK |
| bool "sgdisk tool from gdisk has been replaced by sgdisk in gptfdisk" |
| select BR2_LEGACY |
| select BR2_PACKAGE_GPTFDISK |
| select BR2_PACKAGE_GPTFDISK_SGDISK |
| help |
| The option has been renamed BR2_PACKAGE_GPTFDISK_SGDISK. |
| |
| config BR2_PACKAGE_GDB_HOST |
| bool "gdb for the host option has been renamed" |
| select BR2_PACKAGE_HOST_GDB |
| select BR2_LEGACY |
| help |
| Due to the conversion of gdb to the package infrastructure, |
| the BR2_PACKAGE_GDB_HOST option has been renamed |
| BR2_PACKAGE_HOST_GDB. |
| |
| config BR2_PACKAGE_DIRECTB_DITHER_RGB16 |
| bool "DirectFB RGB16 dithering option has been renamed" |
| select BR2_PACKAGE_DIRECTFB_DITHER_RGB16 |
| select BR2_LEGACY |
| help |
| The option has been renamed |
| BR2_PACKAGE_DIRECTFB_DITHER_RGB16. |
| |
| config BR2_PACKAGE_DIRECTB_TESTS |
| bool "DirectFB Tests option has been renamed" |
| select BR2_PACKAGE_DIRECTFB_TESTS |
| select BR2_LEGACY |
| help |
| The option has been renamed |
| BR2_PACKAGE_DIRECTFB_TESTS. |
| |
| ############################################################################### |
| comment "Legacy options removed in 2012.11" |
| |
| config BR2_PACKAGE_CUSTOMIZE |
| bool "customize package has been removed" |
| select BR2_LEGACY |
| help |
| The 'customize' special package has been removed. Instead, |
| we recommend to create either your own packages, or use a |
| post-build script to customize your root filesystem. See |
| Buildroot's documentation for more details. |
| |
| config BR2_PACKAGE_XSERVER_xorg |
| bool "X.org modular server" |
| select BR2_LEGACY |
| select BR2_PACKAGE_XSERVER_XORG_SERVER_MODULAR |
| help |
| The option has been renamed |
| BR2_PACKAGE_XSERVER_XORG_SERVER_MODULAR. |
| |
| config BR2_PACKAGE_XSERVER_tinyx |
| bool "KDrive / TinyX server" |
| select BR2_LEGACY |
| select BR2_PACKAGE_XSERVER_XORG_SERVER_KDRIVE |
| help |
| The option has been renamed |
| BR2_PACKAGE_XSERVER_XORG_SERVER_KDRIVE. |
| |
| config BR2_PACKAGE_PTHREAD_STUBS |
| bool "pthread-stubs option has been renamed" |
| select BR2_LEGACY |
| select BR2_PACKAGE_XLIB_LIBPTHREAD_STUBS |
| depends on BR2_PACKAGE_XORG7 |
| help |
| For consistency reason, the pthread-stubs package has been |
| renamed to xlib_libpthread-stubs. |
| |
| ############################################################################### |
| comment "Legacy options removed in 2012.08" |
| |
| config BR2_PACKAGE_GETTEXT_STATIC |
| bool "libgettext.a is now selected by BR2_PREFER_STATIC_LIB" |
| select BR2_LEGACY |
| help |
| To build a static gettext library, select BR2_PREFER_STATIC_LIB. |
| |
| |
| config BR2_PACKAGE_LIBINTL |
| bool "libintl" |
| select BR2_LEGACY |
| select BR2_PACKAGE_GETTEXT |
| help |
| libintl is now installed by selecting BR2_PACKAGE_GETTEXT. This now |
| only installs the library, not the executables. |
| |
| config BR2_PACKAGE_INPUT_TOOLS_EVTEST |
| bool "input-tools evtest is now a separate package evtest" |
| select BR2_LEGACY |
| select BR2_PACKAGE_EVTEST |
| help |
| The evtest program from input-tools is now a separate package. |
| |
| config BR2_BFIN_FDPIC |
| bool "BR2_BFIN_FDPIC is now BR2_BINFMT_FDPIC" |
| select BR2_BINFMT_FDPIC |
| select BR2_LEGACY |
| |
| config BR2_BFIN_FLAT |
| bool "BR2_BFIN_FLAT is now BR2_BINFMT_FLAT" |
| select BR2_BINFMT_FLAT |
| select BR2_LEGACY |
| |
| endmenu |