| /** |
| * @file printer_schema.h |
| * @author Radek Krejci <rkrejci@cesnet.cz> |
| * @brief Schema printers for libyang |
| * |
| * Copyright (c) 2015-2019 CESNET, z.s.p.o. |
| * |
| * This source code is licensed under BSD 3-Clause License (the "License"). |
| * You may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * https://opensource.org/licenses/BSD-3-Clause |
| */ |
| |
| #ifndef LY_PRINTER_DATA_H_ |
| #define LY_PRINTER_DATA_H_ |
| |
| #include <stdio.h> |
| #include <unistd.h> |
| |
| #include "tree_data.h" |
| |
| /** |
| * @defgroup dataprinterflags Data printer flags |
| * @ingroup datatree |
| * |
| * Validity flags for data nodes. |
| * |
| * @{ |
| */ |
| #define LYDP_WITHSIBLINGS 0x01 /**< Flag for printing also the (following) sibling nodes of the data node. */ |
| #define LYDP_FORMAT 0x02 /**< Flag for formatted output. */ |
| #define LYDP_KEEPEMPTYCONT 0x04 /**< Preserve empty non-presence containers */ |
| #define LYDP_WD_MASK 0xF0 /**< Mask for with-defaults modes */ |
| #define LYDP_WD_EXPLICIT 0x00 /**< Explicit mode - print only data explicitly being present in the data tree. |
| Note that this is the default value when no WD option is specified. */ |
| #define LYDP_WD_TRIM 0x10 /**< Do not print the nodes with the value equal to their default value */ |
| #define LYDP_WD_ALL 0x20 /**< Include implicit default nodes */ |
| #define LYDP_WD_ALL_TAG 0x40 /**< Same as #LYP_WD_ALL but also adds attribute 'default' with value 'true' to |
| all nodes that has its default value. The 'default' attribute has namespace: |
| urn:ietf:params:xml:ns:netconf:default:1.0 and thus the attributes are |
| printed only when the ietf-netconf-with-defaults module is present in libyang |
| context (but in that case this namespace is always printed). */ |
| #define LYDP_WD_IMPL_TAG 0x80 /**< Same as LYP_WD_ALL_TAG but the attributes are added only to the nodes that |
| are not explicitly present in the original data tree despite their |
| value is equal to their default value. There is the same limitation regarding |
| the presence of ietf-netconf-with-defaults module in libyang context. */ |
| #define LYDP_NETCONF 0x100 /**< Print the data tree for use in NETCONF meaning: |
| - for RPC output - skip the top-level RPC node, |
| - for action output - skip all the parents of and the action node itself, |
| - for action input - enclose the data in an action element in the base YANG namespace, |
| - for all other data - print the whole data tree normally. */ |
| /** |
| * @} |
| */ |
| |
| /** |
| * @brief Print data tree in the specified format into a memory block. |
| * It is up to caller to free the returned string by free(). |
| * |
| * @param[out] strp Pointer to store the resulting dump. |
| * @param[in] root Root node of the data tree to print. It can be actually any (not only real root) |
| * node of the data tree to print the specific subtree. |
| * @param[in] format Data output format. |
| * @param[in] options [Data printer flags](@ref dataprinterflags). With \p format LYD_LYB, only #LYP_WITHSIBLINGS option is accepted. |
| * @return Number of printed characters (excluding the null byte used to end the string) in case of success. |
| * @return Negative value failure (absolute value corresponds to LY_ERR values). |
| */ |
| ssize_t lyd_print_mem(char **strp, const struct lyd_node *root, LYD_FORMAT format, int options); |
| |
| /** |
| * @brief Print data tree in the specified format into a file descriptor. |
| * |
| * @param[in] fd File descriptor where to print the data. |
| * @param[in] root Root node of the data tree to print. It can be actually any (not only real root) |
| * node of the data tree to print the specific subtree. |
| * @param[in] format Data output format. |
| * @param[in] options [Data printer flags](@ref dataprinterflags). With \p format LYD_LYB, only #LYP_WITHSIBLINGS option is accepted. |
| * @return Number of printed characters (excluding the null byte used to end the string) in case of success. |
| * @return Negative value failure (absolute value corresponds to LY_ERR values). |
| */ |
| ssize_t lyd_print_fd(int fd, const struct lyd_node *root, LYD_FORMAT format, int options); |
| |
| /** |
| * @brief Print data tree in the specified format into a file stream. |
| * |
| * @param[in] f File stream where to print the schema. |
| * @param[in] root Root node of the data tree to print. It can be actually any (not only real root) |
| * node of the data tree to print the specific subtree. |
| * @param[in] format Data output format. |
| * @param[in] options [Data printer flags](@ref dataprinterflags). With \p format LYD_LYB, only #LYP_WITHSIBLINGS option is accepted. |
| * @return Number of printed characters (excluding the null byte used to end the string) in case of success. |
| * @return Negative value failure (absolute value corresponds to LY_ERR values). |
| */ |
| ssize_t lyd_print_file(FILE *f, const struct lyd_node *root, LYD_FORMAT format, int options); |
| |
| /** |
| * @brief Print data tree in the specified format into a file. |
| * |
| * @param[in] path File where to print the schema. |
| * @param[in] root Root node of the data tree to print. It can be actually any (not only real root) |
| * node of the data tree to print the specific subtree. |
| * @param[in] format Data output format. |
| * @param[in] options [Data printer flags](@ref dataprinterflags). With \p format LYD_LYB, only #LYP_WITHSIBLINGS option is accepted. |
| * @return Number of printed characters (excluding the null byte used to end the string) in case of success. |
| * @return Negative value failure (absolute value corresponds to LY_ERR values). |
| */ |
| ssize_t lyd_print_path(const char *path, const struct lyd_node *root, LYD_FORMAT format, int options); |
| |
| /** |
| * @brief Print data tree in the specified format using the provided callback. |
| * |
| * @param[in] writeclb Callback function to write the data (see write(2)). |
| * @param[in] arg Optional caller-specific argument to be passed to the \p writeclb callback. |
| * @param[in] root Root node of the data tree to print. It can be actually any (not only real root) |
| * node of the data tree to print the specific subtree. |
| * @param[in] format Data output format. |
| * @param[in] options [Data printer flags](@ref dataprinterflags). With \p format LYD_LYB, only #LYP_WITHSIBLINGS option is accepted. |
| * @return Number of printed characters (excluding the null byte used to end the string) in case of success. |
| * @return Negative value failure (absolute value corresponds to LY_ERR values). |
| */ |
| ssize_t lyd_print_clb(ssize_t (*writeclb)(void *arg, const void *buf, size_t count), void *arg, const struct lyd_node *root, |
| LYD_FORMAT format, int options); |
| |
| #endif /* LY_PRINTER_DATA_H_ */ |