| /** | |
| * @page transition Transition Manual (1.x -> 2.0) | |
| * | |
| * [TOC] | |
| * | |
| * Rewriting libyang codebase and creating libyang version 2.0 was motivated mainly by improving long term maintainability. | |
| * Especially some of the features and design decisions become killers for further development and maintaining the libyang | |
| * codebase. On the other hand, most of the principles introduced in libyang 1.x to handle YANG schemas and manipulate | |
| * instantiated data have proved successful. Therefore, we have decided to keep the basic mechanisms from version 1.x and | |
| * remove the problematic features and modify the improper design decisions. Despite the vision to keep with the mechanisms | |
| * also the API, the new version became a great opportunity to clean up the API and improve its usability mainly by unifying | |
| * how the libyang functions are used. So, in the end, this manual is not just a description of the removed features listing | |
| * removed, modified or added functions. The API should be even better prepared for adding new features and functions. | |
| * Shortly, almost everything has changed at least a little, so you cannot move from version 1.x to 2.0 just by replacing | |
| * code snippets. However, we believe that the change is good and libyang 2.0 is simply better. | |
| * | |
| * In this Manual, we want to introduce the differences between libyang 1.x and 2.0. It is intended for the transition | |
| * from 1.x to 2.0, so if you are new to libyang, simply go to the @ref howto section, this Manual is not for you. | |
| * | |
| * The complete generated list of changes (without any additional notes) can be found in | |
| * <a href="../compat_report.html">the compatibility report</a>. | |
| * | |
| * @section transitionGeneral General Changes | |
| * | |
| * | |
| * @subsection transitionGeneralErros Errors Handling | |
| * | |
| * The most visible change is probably the changed approach to handling errors. While libyang 1.x was using variable | |
| * *ly_errno* to provide error information in case the called function failed, there is no such variable in libyang 2.0. | |
| * On the other hand, most API functions now return ::LY_ERR values directly stating the result. In addition, in case | |
| * the error is somehow connected with the [context](@ref howtoContext), more detailed error information can be obtained | |
| * from the context handler itself. Mainly this change is responsible for the backward incompatibility of almost all | |
| * functions between versions 1.x and 2.0. | |
| * | |
| * Here is the overview of the changed / removed / added functions connected with errors and logging. | |
| * | |
| * libyang 1.x | libyang 2.0 | Notes | |
| * :-------------------------|:-------------------------------------|:------------------------------------------------------- | |
| * - | ::ly_err_last() | New API for handling errors. | |
| * - | ::ly_errcode() | ^ | |
| * ly_verb_dbg() | ::ly_log_dbg_groups() | Rename to align with the names of the accepted values. | |
| * ly_verb() | ::ly_log_level() | ^ | |
| * | |
| * More information about error handling in libyang 2.0 can be found at @ref howtoErrors page. | |
| * | |
| * @subsection transitionGeneralInOut Input / Output Processing | |
| * | |
| * libyang 2.0 introduces input (::ly_in) and output (::ly_out) handlers covering the specific input sources for parsers and | |
| * output targets for printers. They are supposed mainly to simplify parser's and printer's API to avoid the need for | |
| * separate functions for each source/target. The handlers can be used repeatedly to split the inputs or join the outputs. | |
| * | |
| * More information can be found at @ref howtoInput and @ref howtoOutput pages. | |
| * | |
| * | |
| * @subsection transitionGeneralOutputFormatting Output Formatting | |
| * | |
| * In libyang 1.x, there was an inconsistency in printing schemas and data. While the schemas were always printed formatted, | |
| * the data were printed by default without additional indentation. It is clearly visible in the YIN format of the schema, | |
| * which is XML, and the XML encoding of the data. While there was a possibility to format data output with the LYP_FORMAT | |
| * flag, it wasn't possible to change schema output formatting. | |
| * | |
| * libyang 2.0 unifies the behavior of all printers. By default, all the output formats are formatted now. Both, the data as | |
| * well as the schema printers, accept the option to remove additional formatting (different for the specific format, usually | |
| * indentations and blank lines): ::LYD_PRINT_SHRINK for the data printer and ::LYS_PRINT_SHRINK for the schema printer. | |
| * | |
| * | |
| * @subsection transitionGeneralXPath Addressing | |
| * | |
| * If you compare the @ref howtoXPath page from libyang 1.x and 2.0 documentation, you will be probably confused since they | |
| * seem very different. In fact, we have tried to simplify the API by removing the original Schema path format from the | |
| * public API. Since this format is used in YANG format, libyang still supports it internally, but it is not possible to use | |
| * it anywhere in the API. The new formats XPath and Path, mentioned at the @ref howtoXPath page, are both the Data paths | |
| * used in libyang 1.x. The Path format is a subset of XPath format limited to refer to a single node. | |
| * | |
| * This change was reflected in functions serving to get a node based on the specified path. Unfortunately, when comparing | |
| * old and new API, the transition can be confusing since the names are sometimes overloaded (be careful mainly of | |
| * ::lys_find_path()). The following table depicts the changes, but probably a better approach is to handle the functions as | |
| * a completely new API. | |
| * | |
| * libyang 1.x | libyang 2.0 | Notes | |
| * :-------------------------|:-------------------------------------|:------------------------------------------------------- | |
| * ly_ctx_find_path() | - | To simplify the different [types of paths](@ref howtoXPath), the Schema path format is not supported for now. If there will be use cases for it, it can be re-added later, but for now try using ::lys_find_xpath(). | |
| * %lys_find_path() | - | To simplify the different [types of paths](@ref howtoXPath), the Schema path format is not supported for now. If there will be use cases for it, it can be re-added later, but for now try using ::lys_find_xpath(). | |
| * ly_ctx_get_node() | ::lys_find_path() | Renamed to unify API functions, note that there was lys_find_path in libyang 1.x with different functionality in comparison to the function of the same name from libyang 2.0. | |
| * - | ::lys_find_path_atoms() | Extension of ::lys_find_path(). | |
| * - | ::lys_find_lypath_atoms() | ^ | |
| * - | ::lys_find_xpath() | New function reflecting updated @ref howtoXPath\. | |
| * lys_xpath_atomize() | ::lys_find_xpath_atoms() | Rename to unify with the new API, extends ::lys_find_xpath(). | |
| * - | ::lys_find_expr_atoms() | Extension of ::lys_find_xpath(). | |
| * %lyd_path() | ::lyd_path() | Same purpose, just extended functionality. | |
| * lyd_find_path() | ::lyd_find_xpath() | Rename to unify with the new API. | |
| * - | ::lyd_find_path() | Simplified version of ::lyd_find_path(). | |
| * - | ::lyxp_get_expr() | Added functionality due to the changed representation of XPath expressions. | |
| * ly_path_data2schema() | - | Removed since the schema path is not available in API. | |
| * ly_path_xml2json() | - | Removed since done internally, note that even the generic XML parser is not available now. | |
| * lys_node_xpath_atomize() | - | Removed as useless/redundant, use ::lys_find_xpath_atoms(). | |
| * | |
| * @section transitionContext Context | |
| * | |
| * Context, as a concept of a storage interconnecting YANG modules into a YANG schema and YANG schema with the instantiated | |
| * data, was preserved. However, it is now more supposed to be prepared just once before connecting it with any instantiated | |
| * data. The possibility of removing YANG modules from the context was completely dropped. Furthermore, we would like to | |
| * introduce some kind of context lock to completely abandon any change of the YANG modules after starting work with the | |
| * instantiated data. | |
| * | |
| * Other significant changes connected with the context are depicted in the following table. | |
| * | |
| * libyang 1.x | libyang 2.0 | Notes | |
| * :-------------------------|:-------------------------------------|:------------------------------------------------------- | |
| * ly_ctx_clean() | - | Removed functionality of manipulating with the context and the modules already placed in the context. | |
| * ly_ctx_remove_module() | - | ^ | |
| * ly_ctx_set_module_data_clb() and the associated ly_module_data_clb type. | - | ^ | |
| * ly_ctx_get_disabled_module() and the associated ly_ctx_get_disabled_module_iter() | - | ^ | |
| * ly_ctx_info() | ::ly_ctx_get_yanglib_data() | Clarification of what to expect as the output of the function. | |
| * - | ::ly_ctx_get_yanglib_id () | Supplement functionality for ::ly_ctx_get_yanglib_data(). | |
| * ly_ctx_new_ylmem() | TBD | Not yet implemented feature. | |
| * ly_ctx_new_ylpath() | TBD | ^ | |
| * - | ::ly_ctx_unset_searchdir_last() | Extend the functionality of the ::ly_ctx_unset_searchdir() to make its use easier. | |
| * ly_ctx_get_module_older() | - | Removed functionality. | |
| * - | ::ly_ctx_get_module_implemented() | Supplement for ::ly_ctx_get_module() | |
| * - | ::ly_ctx_get_module_latest() | ^ | |
| * - | ::ly_ctx_get_module_implemented_ns() | Supplement for ::ly_ctx_get_module_ns() | |
| * - | ::ly_ctx_get_module_latest_ns() | ^ | |
| * - | ::ly_ctx_get_submodule_latest() | Supplement for ::ly_ctx_get_submodule() | |
| * - | ::ly_ctx_get_submodule2_latest() | Supplement for ::ly_ctx_get_submodule2() | |
| * ly_ctx_get_module_by_ns() | ::ly_ctx_get_module_ns () | Redesign the API - replace some of the parameters with standalone supplement functions. | |
| * - | ::ly_ctx_reset_latests() | The new functionality of maintaining the latest module revision flag. | |
| * ly_ctx_unset_searchdirs() | ::ly_ctx_unset_searchdir() | Simplify API and instead of index numbers, work with the values themselves. | |
| * ly_ctx_set*() | ::ly_ctx_set_options() | API simplification. | |
| * ly_ctx_unset*() | ::ly_ctx_unset_options() | ^ | |
| * | |
| * | |
| * @section transitionSchemas YANG Modules (Schema) | |
| * | |
| * The most significant change between libyang 1.x and 2.0 can be found in schema structures. The schema tree now has two | |
| * different forms - parsed and compiled trees. While the parsed tree reflects the source of the YANG module, the compiled | |
| * tree represents the final tree used to validate the instantiated data. Both formats can be found inside the covering | |
| * ::lys_module structure. More about the new structures can be found at @ref howtoSchema page. | |
| * | |
| * This is an essential change allowing speed up and simplification of data validation, but requiring carefully determine | |
| * which format is more suitable for the specific use case. As mentioned, the compiled trees are better for data validation | |
| * and getting information about the intentioned structure of the schema with all the applied groupings, type modifications, | |
| * augments, deviations, and any defined if-features. On the other hand, the parsed trees are useful for the schema format conversions since they | |
| * provide the original structure of the modules. There is a number of new functions intended to work only with the | |
| * parsed or the compiled tree. These functions are prefixed with `lysp_` and `lysp_` prefixes. | |
| * | |
| * Schema parser, as well as printer functions, are now extended to accept new | |
| * [input / output handlers](@ref transitionGeneralInOut). The previous API working directly with inputs and outputs is | |
| * preserved (or slightly changed), but the functions can be limited in the functionality of the new API. More information | |
| * can be found at @ref howtoSchemaParsers and @ref howtoSchemaPrinters pages. | |
| * | |
| * libyang 1.x | libyang 2.0 | Notes | |
| * :----------------------------|:--------------------------------|:--------------------------------------------------------- | |
| * - | ::lys_parse() | New generic schema parser API using [generic input handler](@ref howtoInput). | |
| * - | ::lys_print_module() | New generic schema printer API using [generic output handler](@ref howtoOutput). | |
| * - | ::lys_print_node() | ^ | |
| * - | ::lys_print_submodule() | ^ | |
| * | |
| * | |
| * The following table introduces other significant changes in the API functions connected with the schema. | |
| * | |
| * libyang 1.x | libyang 2.0 | Notes | |
| * :----------------------------|:--------------------------------|:--------------------------------------------------------- | |
| * lys_set_private() | - | Not needed, all ::lysc_node compatible structures have this pointer so it can be accessed directly. | |
| * lys_is_disabled() | - | Make no sense since the nodes disabled by if-feature are not present in the compiled tree. | |
| * lys_features_list() | - | Not needed, the list of features is available in the parsed tree of the module and submodule. | |
| * lys_features_enable(), lys_features_enable_force() | ::lys_set_implemented() | Set of enabled features can be changed but it causes the whole context (all the modules) to recompile. | |
| * lys_features_disable(), lys_features_disable_force() | - | ^ | |
| * lys_features_state() | - | Redesign of the features handling in the schema tree, the feature's status is newly directly visible as ::LYS_FENABLED flag (in parsed feature structure). | |
| * - | ::lys_feature_value() | Simplified API to get feature's state only based on a feature name string. | |
| * - | ::lysp_feature_next() | After redesigning features handling, this function helps to iterate over all features connected with the module. | |
| * lys_iffeature_value() | ::lysc_iffeature_value() | Renamed, but note that after features handling redesign, the compiled if-feature structure to evaluate is only in ::lysp_feature.iffeatures_c. | |
| * lys_iffeature_value() | - | Not needed since the if-feature statements are directly applied onto the compiled tree. | |
| * lys_is_disabled() | - | ^ | |
| * lys_parent() | - | The compiled tree is more straightforward without the need to take care of nodes added via augments. | |
| * lys_main_module() | - | The compiled tree does not include submodules, so there is always only the main module. | |
| * lys_node_module() | - | ^ | |
| * lys_set_enabled() | - | It is not possible to change context this way (remove or disable modules). | |
| * lys_set_disabled() | - | ^ | |
| * - | ::lys_find_child() | Helpers wrapper around ::lys_getnext(). | |
| * - | ::lys_getnext_ext() | Alternative to ::lys_getnext() allowing processing schema trees inside extension instances. | |
| * - | ::lys_nodetype2str() | New functionality. | |
| * - | ::lys_value_validate() | Supplement functionality to ::lyd_value_validate(). | |
| * lys_is_key() | ::lysc_is_key() | Renamed to connect with the compiled schema tree. | |
| * - | ::lysc_is_userordered() | Added functionality to simplify the examination of generic compiled schema nodes. | |
| * - | ::lysc_is_np_cont() | ^ | |
| * - | ::lysc_node_child() | ^ | |
| * - | ::lysc_node_actions() | ^ | |
| * - | ::lysc_node_notifs() | ^ | |
| * - | ::lysp_node_child() | Added functionality to simplify the examination of generic parsed schema nodes. | |
| * - | ::lysp_node_actions() | ^ | |
| * - | ::lysp_node_notifs() | ^ | |
| * - | ::lysp_node_groupings() | ^ | |
| * - | ::lysp_node_typedefs() | ^ | |
| * - | ::lysc_tree_dfs_full() | Alternative DFS passing implementation to ::LYSC_TREE_DFS_BEGIN macro. | |
| * - | ::lysc_module_dfs_full() | Supplement functionality to ::lysc_tree_dfs_full(). | |
| * lys_path(), lys_data_path() | ::lysc_path() | Redesigned functionality. | |
| * lys_data_path_pattern() | - | Removed as useless | |
| * lys_implemented_module() | ::ly_ctx_get_module_implemented() | Removed, the same result can be simply achieved using ::ly_ctx_get_module_implemented(). | |
| * | |
| * There is a set of functions available to implement data type plugins for storing and manipulating data values in a more | |
| * natural way to the specific data type. For example, IPv4 address type is defined as a string with a pattern, but it is | |
| * more effective and usual to store and handle IPv4 as a 32-bit number. | |
| * | |
| * libyang 1.x | libyang 2.0 | Notes | |
| * :----------------------------|:--------------------------------|:--------------------------------------------------------- | |
| * lys_getnext_union_type() | - | Removed after the type representation redesign. | |
| * - | ::ly_type_identity_isderived() | Helper functions for base types. | |
| * - | ::ly_type_parse_dec64() | ^ | |
| * - | ::ly_type_parse_int() | ^ | |
| * - | ::ly_type_parse_uint() | ^ | |
| * - | ::ly_type_validate_patterns() | ^ | |
| * - | ::ly_type_validate_range() | ^ | |
| * - | ::ly_type_print_get_prefix() | Helper functions for processing prefixes in data values. | |
| * - | ::ly_type_store_resolve_prefix() | ^ | |
| * - | ::lysc_prefixes_compile() | ^ | |
| * - | ::lysc_prefixes_dup() | ^ | |
| * - | ::lysc_prefixes_free() | ^ | |
| * | |
| * | |
| * Extension implementation is not yet finished. The related functions (lys_ext_*()) from libyang 1.x are not currently | |
| * available and all the API changes will be described later. The same situation is with plugins handling. The API is not | |
| * yet ready. Despite the readiness of the data type plugins, support for loading them from external objects is not yet | |
| * supported. | |
| * | |
| * | |
| * libyang 1.x | libyang 2.0 | Notes | |
| * :----------------------------|:--------------------------------|:--------------------------------------------------------- | |
| * lys_ext_complex_get_substmt() | TBD | Not yet implemented feature. | |
| * lys_ext_instance_presence() | TBD | ^ | |
| * lys_ext_instance_substmt() | TBD | ^ | |
| * ly_clean_plugins() | TBD | ^ | |
| * ly_get_loaded_plugins() | TBD | ^ | |
| * ly_load_plugins() | TBD | ^ | |
| * ly_register_exts() | TBD | ^ | |
| * ly_register_types() | TBD | ^ | |
| * | |
| * | |
| * @section transitionData Data Instances | |
| * | |
| * Conceptually, the data tree did not change as much as the schema tree. There is still a generic ::lyd_node structure that | |
| * maps according to the schema node's nodetype to some of the other lyd_node_* structures. All the data nodes were extended | |
| * by hashes to improve performance when searching and processing data trees. The hashes are used for example in the | |
| * lyd_find_* functions. | |
| * | |
| * All the data nodes are also implicitly ordered following the order of the schema nodes. This is the | |
| * reason to change the insertion function. Only the user-ordered lists and leaf-lists can be now placed relative to other | |
| * instances of the same list/leaf-list. Otherwise, the data instance is always inserted/created at the correct place beside | |
| * the right sibling nodes. | |
| * | |
| * For any functions that are available on inputs of different scale (node, subtree, all siblings, whole data tree), | |
| * there are several variants of the specific function with suffix specifying what exactly the processed input will be | |
| * (_single, _tree, _siblings, _all). This way the behavior is always clear in the code. | |
| * | |
| * libyang 1.x | libyang 2.0 | Notes | |
| * :----------------------------|:--------------------------------|:--------------------------------------------------------- | |
| * %lyd_insert_after() | ::lyd_insert_after() | Changed meaning by limiting applicability only to user-ordered list and leaf-list instances. | |
| * %lyd_insert_before() | ::lyd_insert_before() | ^ | |
| * lyd_schema_sort() | - | Not necessary since the nodes are sorted implicitly. | |
| * | |
| * | |
| * Parsing data instances in XML format is newly done directly, without any interstep. Therefore, complete XML API | |
| * (lyxml_*() functions) from libyang 1.x was removed. | |
| * | |
| * Parser's API was simplified to avoid variadic parameters. The functions are newly split to parsed data, notifications, | |
| * RPCs and replies to the RPCs. Similarly to the schema parsers, also the new data parser API works with | |
| * [input handlers](@ref transitionGeneralInOut). The data printer's API was also extended to use new | |
| * [output handlers](@ref transitionGeneralInOut). However, part of the previous API working directly with inputs | |
| * and outputs was preserved. More information about the data parser and printer can be found at | |
| * @ref howtoDataParsers and @ref howtoDataPrinters pages. | |
| * | |
| * libyang 1.x | libyang 2.0 | Notes | |
| * :----------------------------|:--------------------------------|:--------------------------------------------------------- | |
| * - | ::lyd_parse_data() | Redesigned data tree parser. | |
| * lyd_parse_xml() | - | XML tree format was removed. | |
| * lyd_parse_fd() | ::lyd_parse_data_fd() | Renamed and limited to data trees only. | |
| * lyd_parse_mem() | ::lyd_parse_data_mem() | ^ | |
| * lyd_parse_path() | ::lyd_parse_data_path() | ^ | |
| * - | ::lyd_parse_ext_data() | Separated function for parsing data trees matching a schema tree of the given extension instance. | |
| * - | ::lyd_parse_op() | Separated function for parsing RPCs, actions, replies, and notifications. | |
| * - | ::lyd_parse_ext_op() | Separated function for parsing RPCs, actions, replies, and notifications of the given extension instance. | |
| * - | ::lyd_print_all() | New API accepting ::ly_out. | |
| * - | ::lyd_print_tree() | ^ | |
| * | |
| * | |
| * Data validation is still done as part of the parser's process. The standalone functionality is available to check the | |
| * result of data manipulation with the values of the terminal nodes or with the structure of the data tree. In contrast to | |
| * libyang 1.x, adding the default nodes was made available as a standalone function to simplify the data manipulation | |
| * process before the final validation. | |
| * | |
| * Many validation flags were removed because they became obsolete (LYD_OPT_DESTRUCT, LYD_OPT_WHENAUTODEL, | |
| * LYD_OPT_NOEXTDEPS, LYD_OPT_DATA_NO_YANGLIB, LYD_OPT_VAL_DIFF) or we consider them redundant (LYD_OPT_OBSOLETE, | |
| * LYD_OPT_NOSIBLINGS, LYD_OPT_DATA_ADD_YANGLIB). As for LYD_OPT_TRUSTED, this option was mostly replaced with | |
| * ::LYD_PARSE_ONLY because both skip validation but with the significant difference that LYD_OPT_TRUSTED also sets | |
| * the data node flags to be considered validated. The current option ::LYD_PARSE_ONLY does not do this because | |
| * there is now much better support for working with non-validated data trees. Also, in case an invalid tree was marked | |
| * as validated, it could lead to some undesired behavior, which is now avoided. | |
| * | |
| * Worth mentioning is a difference in the LYB format, which now also stores its validation flags. So, in case | |
| * a validated data tree is stored, it is also loaded as validated. | |
| * | |
| * libyang 1.x | libyang 2.0 | Notes | |
| * :----------------------------|:--------------------------------|:--------------------------------------------------------- | |
| * lyd_validate() | ::lyd_validate_all(), ::lyd_validate_op() | Redesigned functionality. | |
| * lyd_validate_modules() | ::lyd_validate_module() | ^ | |
| * lyd_validate_value(), lyd_value_type() | ::lyd_value_validate() | Redesigned functionality. | |
| * - | ::lyd_new_implicit_all() | New in API to explicitly add default nodes, previously done only as part of the validation process. | |
| * - | ::lyd_new_implicit_module() | Supplement functionality to ::lyd_new_implicit_all(). | |
| * - | ::lyd_new_implicit_tree() | ^ | |
| * | |
| * | |
| * The `diff` functionality was completely redesigned. Instead of the array of operations to transform one tree into another, | |
| * the difference between two data trees has newly a form of the annotated data tree describing the differences. A number of | |
| * functions to use the diff tree was added into API. To simply compare just nodes, there are the `compare` functions. | |
| * | |
| * libyang 1.x | libyang 2.0 | Notes | |
| * :----------------------------|:--------------------------------|:--------------------------------------------------------- | |
| * lyd_diff() | ::lyd_diff_tree() | Redesigned functionality. | |
| * - | ::lyd_diff_siblings() | Supplement functionality to ::lyd_diff_tree(). | |
| * - | ::lyd_diff_apply_all() | ^ | |
| * - | ::lyd_diff_apply_module() | ^ | |
| * - | ::lyd_diff_merge_all() | ^ | |
| * - | ::lyd_diff_merge_module() | ^ | |
| * - | ::lyd_diff_merge_tree() | ^ | |
| * - | ::lyd_diff_reverse_all() | ^ | |
| * lyd_free_diff() | - | Removed. | |
| * lyd_free_val_diff() | - | Removed. | |
| * - | ::lyd_compare_single() | Added functionality. | |
| * - | ::lyd_compare_meta() | Supplement functionality to ::lyd_compare_single() | |
| * - | ::lyd_compare_siblings() | ^ | |
| * | |
| * | |
| * For now, the functionality of moving data between two different contexts is not implemented. If you have a real use case | |
| * for this functionality, let us know. | |
| * | |
| * libyang 1.x | libyang 2.0 | Notes | |
| * :----------------------------|:--------------------------------|:--------------------------------------------------------- | |
| * lyd_dup() | ::lyd_dup_single() | Redesigned functionality. | |
| * lyd_dup_withsiblings() | ::lyd_dup_siblings() | ^ | |
| * - | ::lyd_dup_meta_single() | Supplement functionality to ::lyd_dup_single(). | |
| * lyd_dup_to_ctx() | - | Transferring data from one context to another is not supported. | |
| * lyd_merge() | ::lyd_merge_tree() | Renamed. | |
| * - | ::lyd_merge_siblings() | Supplement functionality to ::lyd_merge_tree() | |
| * lyd_merge_to_ctx() | - | Transferring data from one context to another is not supported. | |
| * | |
| * | |
| * There is a significant change in the value structure in terminal nodes. Thanks to the changes in the schema tree, | |
| * it is now much more straightforward to get the type of the value and work with the alternative representation of the value | |
| * fitting better to its type. There is also a new API for the type plugins (see @ref howtoPluginsTypes). Even the base YANG | |
| * data types are now implemented using this API and can be taken as examples for implementing derived data types. | |
| * | |
| * libyang 1.x | libyang 2.0 | Notes | |
| * :----------------------------|:--------------------------------|:--------------------------------------------------------- | |
| * lyd_new(), lyd_new_output() | ::lyd_new_inner(), ::lyd_new_list(), ::lyd_new_list2() | Redesigned functionality to better fit new lyd_node structures, creating RPC's output data is now done via a flag parameter of the functions. | |
| * lyd_new_leaf(), lyd_new_output_leaf() | ::lyd_new_term() | ^ | |
| * lyd_new_anydata(), lyd_new_output_anydata() | ::lyd_new_any() | ^ | |
| * lyd_new_yangdata() | ::lyd_new_ext_inner(), ::lyd_new_ext_list(), ::lyd_new_ext_term(), ::lyd_new_ext_any() | Additional functionality to lyd_new_* functions to cover top-level nodes in extension instances. | |
| * lyd_insert_attr() | ::lyd_new_meta() | Unify naming used in other functions with the similar functionality. | |
| * - | ::lyd_new_attr() | Added functionality to store the data (temporarily) not connected with schema definitions. | |
| * - | ::lyd_new_attr2() | ^ | |
| * - | ::lyd_new_opaq() | ^ | |
| * - | ::lyd_new_opaq2() | ^ | |
| * - | ::lyd_new_path2() | Supplement functionality to ::lyd_new_path(). | |
| * - | ::lyd_new_ext_path() | Supplement functionality to ::lyd_new_path() covering data defined in extension instances. | |
| * lyd_insert() | ::lyd_insert_child() | Renamed to better distinguish from ::lyd_insert_sibling(). | |
| * lyd_change_leaf() | ::lyd_change_term() | Align naming with changed names of data structures. | |
| * - | ::lyd_change_meta() | Transferred functionality of ::lyd_change_term() to metadata. | |
| * - | ::lyd_any_copy_value() | Added functionality. | |
| * lyd_free() | ::lyd_free_tree() | Renamed. | |
| * lyd_free_withsiblings() | ::lyd_free_all() | ^ | |
| * - | ::lyd_free_siblings() | Supplement functionality to ::lyd_free_siblings(). | |
| * lyd_free_attr() | ::lyd_free_attr_single() | Renamed. | |
| * - | ::lyd_free_attr_siblings() | Supplement functionality to ::lyd_free_attr_single(). | |
| * - | ::lyd_free_meta_single() | Added functionality. | |
| * - | ::lyd_free_meta_siblings() | ^ | |
| * lyd_unlink() | ::lyd_unlink_tree() | Renamed. | |
| * | |
| * | |
| * Here is the table of other changes in data API. | |
| * | |
| * libyang 1.x | libyang 2.0 | Notes | |
| * :----------------------------|:--------------------------------|:--------------------------------------------------------- | |
| * lyd_find_instance() | - | Removed. | |
| * lyd_find_sibling() | - | Removed, functionality can be replaced by ::lyd_find_sibling_val(). | |
| * lyd_find_sibling_set() | - | ^ | |
| * - | ::lyd_find_sibling_first() | Alternative function to ::lyd_find_sibling_val(). | |
| * - | ::lyd_find_meta() | New functionality. | |
| * lyd_wd_default() | ::lyd_is_default() | Renamed to unlink from with-default capability. | |
| * - | ::lyd_parent() | New wrapper to get generic ::lyd_node pointer of the parent. | |
| * - | ::lyd_child(), ::lyd_child_no_keys() | New wrapper to cover all children possibilities hidden behind a generic ::lyd_node structure. | |
| * - | ::lyd_owner_module() | Added functionality. | |
| * - | ::lyd_value_compare() | Added Functionality. | |
| * - | ::lyd_target() | Added functionality for the instance-identifier representation. | |
| * lyd_node_module() | - | Not necessary since the connection with the compiled modules is much more straightforward. | |
| * lyd_leaf_type() | - | Not necessary since the real type information is much more clear from the new ::lyd_value. | |
| * lyd_dec64_to_double() | - | Removed as useless. | |
| * lyd_node_should_print() | - | ^ | |
| */ |