blob: e2fd0b1bf80630c12afd6f7bc9d19f1b5f6e972a [file] [log] [blame]
/**
* @file out.h
* @author Radek Krejci <rkrejci@cesnet.cz>
* @brief libyang output structures and functions
*
* Copyright (c) 2015-2020 CESNET, z.s.p.o.
*
* This source code is licensed under BSD 3-Clause License (the "License").
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* https://opensource.org/licenses/BSD-3-Clause
*/
#ifndef LY_OUT_H_
#define LY_OUT_H_
#include <stdio.h>
#include <unistd.h>
#include "log.h"
#ifdef __cplusplus
extern "C" {
#endif
/**
* @page howtoOutput Output Processing
*
* libyang provides a mechanism to generalize work with the outputs (and [inputs](@ref howtoInput)) of
* the different types. The ::ly_out handler can be created providing necessary information connected with the specific
* output type and then used throughout the printers functions. The API allows to combine output from libyang (data or schema)
* printers and output directly provided by the caller (via ::ly_print() or ::ly_write()).
*
* Using a generic output handler avoids need to have a set of functions for each printer functionality and results in simpler API.
*
* The API allows to alter the target of the data behind the handler by another target (of the same type). Also resetting
* a seekable output is possible with ::ly_out_reset() to re-write the output.
*
* @note
* This mechanism was introduced in libyang 2.0. To simplify transition from libyang 1.0 to version 2.0 and also for
* some simple use case where using the output handler would be an overkill, there are some basic printer functions
* that do not require output handler. But remember, that functionality of these function can be limited in particular cases
* in contrast to the functions using output handlers.
*
* Functions List
* --------------
* - ::ly_out_new_clb()
* - ::ly_out_new_fd()
* - ::ly_out_new_file()
* - ::ly_out_new_filepath()
* - ::ly_out_new_memory()
*
* - ::ly_out_clb()
* - ::ly_out_clb_arg()
* - ::ly_out_fd()
* - ::ly_out_file()
* - ::ly_out_filepath()
* - ::ly_out_memory()
*
* - ::ly_out_type()
* - ::ly_out_printed()
*
* - ::ly_out_reset()
* - ::ly_out_free()
*
* - ::ly_print()
* - ::ly_print_flush()
* - ::ly_write()
*
* libyang Printers List
* --------------------
* - @subpage howtoSchemaPrinters
* - @subpage howtoDataPrinters
*/
/**
* @struct ly_out
* @brief Printer output structure specifying where the data are printed.
*/
struct ly_out;
/**
* @brief Common value for data as well as schema printers to avoid formatting indentations and new lines
*/
#define LY_PRINT_SHRINK 0x02
/**
* @brief Types of the printer's output
*/
typedef enum LY_OUT_TYPE {
LY_OUT_ERROR = -1, /**< error value to indicate failure of the functions returning LY_OUT_TYPE */
LY_OUT_FD, /**< file descriptor printer */
LY_OUT_FDSTREAM, /**< internal replacement for LY_OUT_FD in case vdprintf() is not available */
LY_OUT_FILE, /**< FILE stream printer */
LY_OUT_FILEPATH, /**< filepath printer */
LY_OUT_MEMORY, /**< memory printer */
LY_OUT_CALLBACK /**< callback printer */
} LY_OUT_TYPE;
/**
* @brief Get output type of the printer handler.
*
* @param[in] out Printer handler.
* @return Type of the printer's output.
*/
LIBYANG_API_DECL LY_OUT_TYPE ly_out_type(const struct ly_out *out);
/**
* @brief Reset the output medium to write from its beginning, so the following printer function will rewrite the current data
* instead of appending.
*
* Note that in case the underlying output is not seekable (stream referring a pipe/FIFO/socket or the callback output type),
* nothing actually happens despite the function succeeds. Also note that the medium is not returned to the state it was when
* the handler was created. For example, file is seeked into the offset zero and truncated, the content from the time it was opened with
* ::ly_out_new_file() is not restored.
*
* @param[in] out Printer handler.
* @return LY_SUCCESS in case of success
* @return LY_ESYS in case of failure
*/
LIBYANG_API_DECL LY_ERR ly_out_reset(struct ly_out *out);
/**
* @brief Generic write callback for data printed by libyang.
*
* @param[in] user_data Optional caller-specific argument.
* @param[in] buf Data to write.
* @param[in] count Number of bytes to write.
* @return Number of printed bytes.
* @return Negative value in case of error.
*/
typedef ssize_t (*ly_write_clb)(void *user_data, const void *buf, size_t count);
/**
* @brief Create printer handler using callback printer function.
*
* @param[in] writeclb Pointer to the printer callback function writing the data (see write(2)).
* @param[in] user_data Optional caller-specific argument to be passed to the @p writeclb callback.
* @param[out] out Created printer handler supposed to be passed to different ly*_print() functions.
* @return LY_SUCCESS in case of success
* @return LY_EMEM in case allocating the @p out handler fails.
*/
LIBYANG_API_DECL LY_ERR ly_out_new_clb(ly_write_clb writeclb, void *user_data, struct ly_out **out);
/**
* @brief Get or reset callback function associated with a callback printer handler.
*
* @param[in] out Printer handler.
* @param[in] writeclb Optional argument providing a new printer callback function for the handler. If NULL, only the current
* printer callback is returned.
* @return Previous printer callback.
*/
LIBYANG_API_DECL ly_write_clb ly_out_clb(struct ly_out *out, ly_write_clb writeclb);
/**
* @brief Get or reset callback function's argument associated with a callback printer handler.
*
* @param[in] out Printer handler.
* @param[in] arg caller-specific argument to be passed to the callback function associated with the printer handler.
* If NULL, only the current file descriptor value is returned.
* @return The previous callback argument.
*/
LIBYANG_API_DECL void *ly_out_clb_arg(struct ly_out *out, void *arg);
/**
* @brief Create printer handler using file descriptor.
*
* @param[in] fd File descriptor to use.
* @param[out] out Created printer handler supposed to be passed to different ly*_print() functions.
* @return LY_SUCCESS in case of success
* @return LY_ERR value in case of failure.
*/
LIBYANG_API_DECL LY_ERR ly_out_new_fd(int fd, struct ly_out **out);
/**
* @brief Get or reset file descriptor printer handler.
*
* @param[in] out Printer handler.
* @param[in] fd Optional value of a new file descriptor for the handler. If -1, only the current file descriptor value is returned.
* @return Previous value of the file descriptor. Note that caller is responsible for closing the returned file descriptor in case of setting new descriptor @p fd.
* @return -1 in case of error when setting up the new file descriptor.
*/
LIBYANG_API_DECL int ly_out_fd(struct ly_out *out, int fd);
/**
* @brief Create printer handler using file stream.
*
* @param[in] f File stream to use.
* @param[out] out Created printer handler supposed to be passed to different ly*_print() functions.
* @return LY_SUCCESS in case of success
* @return LY_ERR value in case of failure.
*/
LIBYANG_API_DECL LY_ERR ly_out_new_file(FILE *f, struct ly_out **out);
/**
* @brief Get or reset file stream printer handler.
*
* @param[in] out Printer handler.
* @param[in] f Optional new file stream for the handler. If NULL, only the current file stream is returned.
* @return Previous file stream of the handler. Note that caller is responsible for closing the returned stream in case of setting new stream @p f.
*/
LIBYANG_API_DECL FILE *ly_out_file(struct ly_out *out, FILE *f);
/**
* @brief Create printer handler using memory to dump data.
*
* @param[in] strp Pointer to store the resulting data. If it points to a pointer to an allocated buffer and
* @p size of the buffer is set, the buffer is used (and extended if needed) to store the printed data.
* @param[in] size Size of the buffer provided via @p strp. In case it is 0, the buffer for the printed data
* is newly allocated even if @p strp points to a pointer to an existing buffer.
* @param[out] out Created printer handler supposed to be passed to different ly*_print() functions.
* @return LY_SUCCESS in case of success
* @return LY_ERR value in case of failure.
*/
LIBYANG_API_DECL LY_ERR ly_out_new_memory(char **strp, size_t size, struct ly_out **out);
/**
* @brief Get or change memory where the data are dumped.
*
* @param[in] out Printer handler.
* @param[in] strp Optional new string pointer to store the resulting data, same rules as in ::ly_out_new_memory() are applied.
* @param[in] size Size of the buffer provided via @p strp. In case it is 0, the buffer for the printed data
* is newly allocated even if @p strp points to a pointer to an existing buffer. In case the @p strp is NULL, this
* parameter is ignored.
* @return Previous dumped data. Note that the caller is responsible to free the data in case of changing string pointer @p strp.
*/
LIBYANG_API_DECL char *ly_out_memory(struct ly_out *out, char **strp, size_t size);
/**
* @brief Create printer handler file of the given filename.
*
* @param[in] filepath Path of the file where to write data.
* @param[out] out Created printer handler supposed to be passed to different ly*_print() functions.
* @return NULL in case of error.
* @return Created printer handler supposed to be passed to different ly*_print_*() functions.
*/
LIBYANG_API_DECL LY_ERR ly_out_new_filepath(const char *filepath, struct ly_out **out);
/**
* @brief Get or change the filepath of the file where the printer prints the data.
*
* Note that in case of changing the filepath, the current file is closed and a new one is
* created/opened instead of renaming the previous file. Also note that the previous filepath
* string is returned only in case of not changing it's value.
*
* @param[in] out Printer handler.
* @param[in] filepath Optional new filepath for the handler. If and only if NULL, the current filepath string is returned.
* @return Previous filepath string in case the @p filepath argument is NULL.
* @return NULL if changing filepath succeeds and ((void *)-1) otherwise.
*/
LIBYANG_API_DECL const char *ly_out_filepath(struct ly_out *out, const char *filepath);
/**
* @brief Generic printer of the given format string into the specified output.
*
* Alternatively, ::ly_write() can be used.
*
* @param[in] out Output specification.
* @param[in] format Format string to be printed.
* @return LY_ERR value, get number of the printed bytes using ::ly_out_printed.
*/
LIBYANG_API_DECL LY_ERR ly_print(struct ly_out *out, const char *format, ...);
/**
* @brief Flush the output from any internal buffers and clean any auxiliary data.
* @param[in] out Output specification.
*/
LIBYANG_API_DECL void ly_print_flush(struct ly_out *out);
/**
* @brief Generic printer of the given string buffer into the specified output.
*
* Alternatively, ::ly_print() can be used.
*
* @param[in] out Output specification.
* @param[in] buf Memory buffer with the data to print.
* @param[in] len Length of the data to print in the @p buf.
* @return LY_ERR value, get number of the printed bytes using ::ly_out_printed.
*/
LIBYANG_API_DECL LY_ERR ly_write(struct ly_out *out, const char *buf, size_t len);
/**
* @brief Get the number of printed bytes by the last function.
*
* @param[in] out Out structure used.
* @return Number of printed bytes.
*/
LIBYANG_API_DECL size_t ly_out_printed(const struct ly_out *out);
/**
* @brief Free the printer handler.
* @param[in] out Printer handler to free.
* @param[in] clb_arg_destructor Freeing function for printer callback (LY_OUT_CALLBACK) argument.
* @param[in] destroy Flag to free allocated buffer (for LY_OUT_MEMORY) or to
* close stream/file descriptor (for LY_OUT_FD, LY_OUT_FDSTREAM and LY_OUT_FILE)
*/
LIBYANG_API_DECL void ly_out_free(struct ly_out *out, void (*clb_arg_destructor)(void *arg), ly_bool destroy);
#ifdef __cplusplus
}
#endif
#endif /* LY_OUT_H_ */