uncrustify.cfg - github/CESNET/libyang - Gitiles

 # Uncrustify-0.71.0_f

 #
 # General options
 #

 # Added specific file extensions.
 file_ext C .c.in
 file_ext C-Header .h.in

 # The type of line endings.
 #
 # Default: auto
 newlines                        = lf       # lf/crlf/cr/auto

 # The original size of tabs in the input.
 #
 # Default: 8
 input_tab_size                  = 8        # unsigned number

 # The size of tabs in the output (only used if align_with_tabs=true).
 #
 # Default: 8
 output_tab_size                 = 8        # unsigned number

 # The ASCII value of the string escape char, usually 92 (\) or (Pawn) 94 (^).
 #
 # Default: 92
 string_escape_char              = 92       # unsigned number

 # Alternate string escape char (usually only used for Pawn).
 # Only works right before the quote char.
 string_escape_char2             = 0        # unsigned number

 # Replace tab characters found in string literals with the escape sequence \t
 # instead.
 string_replace_tab_chars        = true     # true/false

 # Allow interpreting '>=' and '>>=' as part of a template in code like
 # 'void f(list<list<B>>=val);'. If true, 'assert(x<0 && y>=3)' will be broken.
 # Improvements to template detection may make this option obsolete.
 tok_split_gte                   = false    # true/false

 # Disable formatting of NL_CONT ('\\n') ended lines (e.g. multiline macros)
 disable_processing_nl_cont      = false    # true/false

 # Specify the marker used in comments to disable processing of part of the
 # file.
 # The comment should be used alone in one line.
 #
 # Default:  *INDENT-OFF*
 disable_processing_cmt          = " *INDENT-OFF*"      # string

 # Specify the marker used in comments to (re)enable processing in a file.
 # The comment should be used alone in one line.
 #
 # Default:  *INDENT-ON*
 enable_processing_cmt           = " *INDENT-ON*"     # string

 # Enable parsing of digraphs.
 enable_digraphs                 = false    # true/false

 # Add or remove the UTF-8 BOM (recommend 'remove').
 utf8_bom                        = ignore   # ignore/add/remove/force

 # If the file contains bytes with values between 128 and 255, but is not
 # UTF-8, then output as UTF-8.
 utf8_byte                       = false    # true/false

 # Force the output encoding to UTF-8.
 utf8_force                      = true     # true/false

 # Add or remove space between 'do' and '{'.
 sp_do_brace_open                = force     # ignore/add/remove/force

 # Add or remove space between '}' and 'while'.
 sp_brace_close_while            = force     # ignore/add/remove/force

 # Add or remove space between 'while' and '('.
 sp_while_paren_open             = force     # ignore/add/remove/force

 #
 # Spacing options
 #

 # Add or remove space around non-assignment symbolic operators ('+', '/', '%',
 # '<<', and so forth).
 sp_arith                        = force     # ignore/add/remove/force

 # Add or remove space around arithmetic operators '+' and '-'.
 #
 # Overrides sp_arith.
 sp_arith_additive               = force     # ignore/add/remove/force

 # Add or remove space around assignment operator '=', '+=', etc.
 sp_assign                       = force     # ignore/add/remove/force

 # Add or remove space around '=' in C++11 lambda capture specifications.
 #
 # Overrides sp_assign.
 sp_cpp_lambda_assign            = force    # ignore/add/remove/force

 # Add or remove space after the capture specification of a C++11 lambda when
 # an argument list is present, as in '[] <here> (int x){ ... }'.
 sp_cpp_lambda_square_paren      = ignore   # ignore/add/remove/force

 # Add or remove space after the capture specification of a C++11 lambda with
 # no argument list is present, as in '[] <here> { ... }'.
 sp_cpp_lambda_square_brace      = ignore   # ignore/add/remove/force

 # Add or remove space after the argument list of a C++11 lambda, as in
 # '[](int x) <here> { ... }'.
 sp_cpp_lambda_paren_brace       = ignore   # ignore/add/remove/force

 # Add or remove space between a lambda body and its call operator of an
 # immediately invoked lambda, as in '[]( ... ){ ... } <here> ( ... )'.
 sp_cpp_lambda_fparen            = ignore   # ignore/add/remove/force

 # Add or remove space around assignment operator '=' in a prototype.
 #
 # If set to ignore, use sp_assign.
 sp_assign_default               = ignore   # ignore/add/remove/force

 # Add or remove space before assignment operator '=', '+=', etc.
 #
 # Overrides sp_assign.
 sp_before_assign                = force    # ignore/add/remove/force

 # Add or remove space after assignment operator '=', '+=', etc.
 #
 # Overrides sp_assign.
 sp_after_assign                 = force    # ignore/add/remove/force

 # Add or remove space in 'NS_ENUM ('.
 sp_enum_paren                   = force    # ignore/add/remove/force

 # Add or remove space around assignment '=' in enum.
 sp_enum_assign                  = force    # ignore/add/remove/force

 # Add or remove space before assignment '=' in enum.
 #
 # Overrides sp_enum_assign.
 sp_enum_before_assign           = force    # ignore/add/remove/force

 # Add or remove space after assignment '=' in enum.
 #
 # Overrides sp_enum_assign.
 sp_enum_after_assign            = force    # ignore/add/remove/force

 # Add or remove space around assignment ':' in enum.
 sp_enum_colon                   = ignore    # ignore/add/remove/force

 # Add or remove space around preprocessor '##' concatenation operator.
 #
 # Default: add
 sp_pp_concat                    = ignore    # ignore/add/remove/force

 # Add or remove space after preprocessor '#' stringify operator.
 # Also affects the '#@' charizing operator.
 sp_pp_stringify                 = ignore    # ignore/add/remove/force

 # Add or remove space before preprocessor '#' stringify operator
 # as in '#define x(y) L#y'.
 sp_before_pp_stringify          = ignore    # ignore/add/remove/force

 # Add or remove space around boolean operators '&&' and '||'.
 sp_bool                         = force     # ignore/add/remove/force

 # Add or remove space around compare operator '<', '>', '==', etc.
 sp_compare                      = force     # ignore/add/remove/force

 # Add or remove space inside '(' and ')'.
 sp_inside_paren                 = remove    # ignore/add/remove/force

 # Add or remove space between nested parentheses, i.e. '((' vs. ') )'.
 sp_paren_paren                  = remove    # ignore/add/remove/force

 # Add or remove space between back-to-back parentheses, i.e. ')(' vs. ') ('.
 sp_cparen_oparen                = remove    # ignore/add/remove/force

 # Whether to balance spaces inside nested parentheses.
 sp_balance_nested_parens        = false     # true/false

 # Add or remove space between ')' and '{'.
 sp_paren_brace                  = force     # ignore/add/remove/force

 # Add or remove space between nested braces, i.e. '{{' vs '{ {'.
 sp_brace_brace                  = ignore    # ignore/add/remove/force

 # Add or remove space before pointer star '*'.
 sp_before_ptr_star              = ignore    # ignore/add/remove/force

 # Add or remove space before pointer star '*' that isn't followed by a
 # variable name. If set to ignore, sp_before_ptr_star is used instead.
 sp_before_unnamed_ptr_star      = ignore   # ignore/add/remove/force

 # Add or remove space between pointer stars '*'.
 sp_between_ptr_star             = remove   # ignore/add/remove/force

 # Add or remove space after pointer star '*', if followed by a word.
 #
 # Overrides sp_type_func.
 sp_after_ptr_star               = ignore   # ignore/add/remove/force

 # Add or remove space after pointer caret '^', if followed by a word.
 #sp_after_ptr_block_caret        = ignore   # ignore/add/remove/force

 # Add or remove space after pointer star '*', if followed by a qualifier.
 sp_after_ptr_star_qualifier     = ignore   # ignore/add/remove/force

 # Add or remove space after a pointer star '*', if followed by a function
 # prototype or function definition.
 #
 # Overrides sp_after_ptr_star and sp_type_func.
 sp_after_ptr_star_func          = ignore   # ignore/add/remove/force

 # Add or remove space after a pointer star '*', if followed by an open
 # parenthesis, as in 'void* (*)().
 sp_ptr_star_paren               = remove   # ignore/add/remove/force

 # Add or remove space before a pointer star '*', if followed by a function
 # prototype or function definition.
 sp_before_ptr_star_func         = ignore   # ignore/add/remove/force

 # Add or remove space before a reference sign '&'.
 sp_before_byref                 = ignore    # ignore/add/remove/force

 # Add or remove space before a reference sign '&' that isn't followed by a
 # variable name. If set to ignore, sp_before_byref is used instead.
 sp_before_unnamed_byref         = ignore   # ignore/add/remove/force

 # Add or remove space after reference sign '&', if followed by a word.
 #
 # Overrides sp_type_func.
 sp_after_byref                  = ignore   # ignore/add/remove/force

 # Add or remove space after a reference sign '&', if followed by a function
 # prototype or function definition.
 #
 # Overrides sp_after_byref and sp_type_func.
 sp_after_byref_func             = ignore   # ignore/add/remove/force

 # Add or remove space before a reference sign '&', if followed by a function
 # prototype or function definition.
 sp_before_byref_func            = ignore    # ignore/add/remove/force

 # Add or remove space between type and word.
 #
 # Default: force
 sp_after_type                   = ignore    # ignore/add/remove/force

 # Add or remove space between 'decltype(...)' and word.
 sp_after_decltype               = ignore   # ignore/add/remove/force

 # (D) Add or remove space before the parenthesis in the D constructs
 # 'template Foo(' and 'class Foo('.
 sp_before_template_paren        = ignore   # ignore/add/remove/force

 # Add or remove space between 'template' and '<'.
 # If set to ignore, sp_before_angle is used.
 sp_template_angle               = ignore   # ignore/add/remove/force

 # Add or remove space before '<'.
 sp_before_angle                 = ignore   # ignore/add/remove/force

 # Add or remove space inside '<' and '>'.
 sp_inside_angle                 = ignore   # ignore/add/remove/force

 # Add or remove space inside '<>'.
 sp_inside_angle_empty           = ignore   # ignore/add/remove/force

 # Add or remove space between '>' and ':'.
 sp_angle_colon                  = ignore   # ignore/add/remove/force

 # Add or remove space after '>'.
 sp_after_angle                  = ignore   # ignore/add/remove/force

 # Add or remove space between '>' and '(' as found in 'new List<byte>(foo);'.
 sp_angle_paren                  = ignore   # ignore/add/remove/force

 # Add or remove space between '>' and '()' as found in 'new List<byte>();'.
 sp_angle_paren_empty            = ignore   # ignore/add/remove/force

 # Add or remove space between '>' and a word as in 'List<byte> m;' or
 # 'template <typename T> static ...'.
 sp_angle_word                   = ignore   # ignore/add/remove/force

 # Add or remove space between '>' and '>' in '>>' (template stuff).
 #
 # Default: add
 sp_angle_shift                  = ignore   # ignore/add/remove/force

 # (C++11) Permit removal of the space between '>>' in 'foo<bar<int> >'. Note
 # that sp_angle_shift cannot remove the space without this option.
 sp_permit_cpp11_shift           = false    # true/false

 # Add or remove space before '(' of control statements ('if', 'for', 'switch',
 # 'while', etc.).
 sp_before_sparen                = force    # ignore/add/remove/force

 # Add or remove space inside '(' and ')' of control statements.
 sp_inside_sparen                = remove   # ignore/add/remove/force

 # Add or remove space after '(' of control statements.
 #
 # Overrides sp_inside_sparen.
 sp_inside_sparen_open           = ignore   # ignore/add/remove/force

 # Add or remove space before ')' of control statements.
 #
 # Overrides sp_inside_sparen.
 sp_inside_sparen_close          = ignore   # ignore/add/remove/force

 # Add or remove space after ')' of control statements.
 sp_after_sparen                 = force    # ignore/add/remove/force

 # Add or remove space between ')' and '{' of of control statements.
 sp_sparen_brace                 = force    # ignore/add/remove/force

 # (D) Add or remove space between 'invariant' and '('.
 sp_invariant_paren              = ignore   # ignore/add/remove/force

 # (D) Add or remove space after the ')' in 'invariant (C) c'.
 sp_after_invariant_paren        = ignore   # ignore/add/remove/force

 # Add or remove space before empty statement ';' on 'if', 'for' and 'while'.
 sp_special_semi                 = ignore   # ignore/add/remove/force

 # Add or remove space before ';'.
 #
 # Default: remove
 sp_before_semi                  = remove   # ignore/add/remove/force

 # Add or remove space before ';' in non-empty 'for' statements.
 sp_before_semi_for              = remove   # ignore/add/remove/force

 # Add or remove space before a semicolon of an empty part of a for statement.
 sp_before_semi_for_empty        = force    # ignore/add/remove/force

 # Add or remove space after ';', except when followed by a comment.
 #
 # Default: add
 sp_after_semi                   = force    # ignore/add/remove/force

 # Add or remove space after ';' in non-empty 'for' statements.
 #
 # Default: force
 sp_after_semi_for               = force    # ignore/add/remove/force

 # Add or remove space after the final semicolon of an empty part of a for
 # statement, as in 'for ( ; ; <here> )'.
 sp_after_semi_for_empty         = force    # ignore/add/remove/force

 # Add or remove space before '[' (except '[]').
 sp_before_square                = ignore   # ignore/add/remove/force

 # Add or remove space before '[' for a variable definition.
 #
 # Default: remove
 sp_before_vardef_square         = ignore   # ignore/add/remove/force

 # Add or remove space before '[' for asm block.
 sp_before_square_asm_block      = ignore   # ignore/add/remove/force

 # Add or remove space before '[]'.
 sp_before_squares               = ignore   # ignore/add/remove/force

 # Add or remove space before C++17 structured bindings.
 sp_cpp_before_struct_binding    = ignore   # ignore/add/remove/force

 # Add or remove space inside a non-empty '[' and ']'.
 sp_inside_square                = ignore   # ignore/add/remove/force

 # (OC) Add or remove space inside a non-empty Objective-C boxed array '@[' and
 # ']'. If set to ignore, sp_inside_square is used.
 sp_inside_square_oc_array       = ignore   # ignore/add/remove/force

 # Add or remove space after ',', i.e. 'a,b' vs. 'a, b'.
 sp_after_comma                  = add      # ignore/add/remove/force

 # Add or remove space before ','.
 #
 # Default: remove
 sp_before_comma                 = remove   # ignore/add/remove/force

 # (C#) Add or remove space between ',' and ']' in multidimensional array type
 # like 'int[,,]'.
 sp_after_mdatype_commas         = ignore   # ignore/add/remove/force

 # (C#) Add or remove space between '[' and ',' in multidimensional array type
 # like 'int[,,]'.
 sp_before_mdatype_commas        = ignore   # ignore/add/remove/force

 # (C#) Add or remove space between ',' in multidimensional array type
 # like 'int[,,]'.
 sp_between_mdatype_commas       = ignore   # ignore/add/remove/force

 # Add or remove space between an open parenthesis and comma,
 # i.e. '(,' vs. '( ,'.
 #
 # Default: force
 sp_paren_comma                  = force    # ignore/add/remove/force

 # Add or remove space before the variadic '...' when preceded by a
 # non-punctuator.
 sp_before_ellipsis              = force    # ignore/add/remove/force

 # Add or remove space between a type and '...'.
 sp_type_ellipsis                = force    # ignore/add/remove/force

 # (D) Add or remove space between a type and '?'.
 #sp_type_question                = ignore   # ignore/add/remove/force

 # Add or remove space between ')' and '...'.
 sp_paren_ellipsis               = force    # ignore/add/remove/force

 # Add or remove space between ')' and a qualifier such as 'const'.
 sp_paren_qualifier              = force    # ignore/add/remove/force

 # Add or remove space between ')' and 'noexcept'.
 sp_paren_noexcept               = ignore   # ignore/add/remove/force

 # Add or remove space after class ':'.
 sp_after_class_colon            = ignore   # ignore/add/remove/force

 # Add or remove space before class ':'.
 sp_before_class_colon           = ignore   # ignore/add/remove/force

 # Add or remove space after class constructor ':'.
 sp_after_constr_colon           = ignore   # ignore/add/remove/force

 # Add or remove space before class constructor ':'.
 sp_before_constr_colon          = ignore   # ignore/add/remove/force

 # Add or remove space before case ':'.
 #
 # Default: remove
 sp_before_case_colon            = remove   # ignore/add/remove/force

 # Add or remove space between 'operator' and operator sign.
 sp_after_operator               = ignore   # ignore/add/remove/force

 # Add or remove space between the operator symbol and the open parenthesis, as
 # in 'operator ++('.
 sp_after_operator_sym           = ignore   # ignore/add/remove/force

 # Overrides sp_after_operator_sym when the operator has no arguments, as in
 # 'operator *()'.
 sp_after_operator_sym_empty     = ignore   # ignore/add/remove/force

 # Add or remove space after C/D cast, i.e. 'cast(int)a' vs. 'cast(int) a' or
 # '(int)a' vs. '(int) a'.
 sp_after_cast                   = ignore   # ignore/add/remove/force

 # Add or remove spaces inside cast parentheses.
 sp_inside_paren_cast            = remove   # ignore/add/remove/force

 # Add or remove space between the type and open parenthesis in a C++ cast,
 # i.e. 'int(exp)' vs. 'int (exp)'.
 sp_cpp_cast_paren               = ignore   # ignore/add/remove/force

 # Add or remove space between 'sizeof' and '('.
 sp_sizeof_paren                 = ignore   # ignore/add/remove/force

 # Add or remove space between 'sizeof' and '...'.
 sp_sizeof_ellipsis              = remove   # ignore/add/remove/force

 # Add or remove space between 'sizeof...' and '('.
 sp_sizeof_ellipsis_paren        = remove   # ignore/add/remove/force

 # Add or remove space between 'decltype' and '('.
 sp_decltype_paren               = ignore   # ignore/add/remove/force

 # (Pawn) Add or remove space after the tag keyword.
 #sp_after_tag                    = ignore   # ignore/add/remove/force

 # Add or remove space inside enum '{' and '}'.
 sp_inside_braces_enum           = force    # ignore/add/remove/force

 # Add or remove space inside struct/union '{' and '}'.
 sp_inside_braces_struct         = force    # ignore/add/remove/force

 # (OC) Add or remove space inside Objective-C boxed dictionary '{' and '}'
 #sp_inside_braces_oc_dict        = ignore   # ignore/add/remove/force

 # Add or remove space after open brace in an unnamed temporary
 # direct-list-initialization.
 sp_after_type_brace_init_lst_open = ignore   # ignore/add/remove/force

 # Add or remove space before close brace in an unnamed temporary
 # direct-list-initialization.
 sp_before_type_brace_init_lst_close = ignore   # ignore/add/remove/force

 # Add or remove space inside an unnamed temporary direct-list-initialization.
 sp_inside_type_brace_init_lst   = ignore   # ignore/add/remove/force

 # Add or remove space inside '{' and '}'.
 sp_inside_braces                = remove   # ignore/add/remove/force

 # Add or remove space inside '{}'.
 sp_inside_braces_empty          = remove   # ignore/add/remove/force

 # Add or remove space around trailing return operator '->'.
 sp_trailing_return              = ignore   # ignore/add/remove/force

 # Add or remove space between return type and function name. A minimum of 1
 # is forced except for pointer return types.
 sp_type_func                    = remove   # ignore/add/remove/force

 # Add or remove space between type and open brace of an unnamed temporary
 # direct-list-initialization.
 sp_type_brace_init_lst          = ignore   # ignore/add/remove/force

 # Add or remove space between function name and '(' on function declaration.
 sp_func_proto_paren             = remove   # ignore/add/remove/force

 # Add or remove space between function name and '()' on function declaration
 # without parameters.
 sp_func_proto_paren_empty       = remove   # ignore/add/remove/force

 # Add or remove space between function name and '(' with a typedef specifier.
 sp_func_type_paren              = remove   # ignore/add/remove/force

 # Add or remove space between alias name and '(' of a non-pointer function type typedef.
 sp_func_def_paren               = ignore   # ignore/add/remove/force

 # Add or remove space between function name and '()' on function definition
 # without parameters.
 sp_func_def_paren_empty         = remove   # ignore/add/remove/force

 # Add or remove space inside empty function '()'.
 # Overrides sp_after_angle unless use_sp_after_angle_always is set to true.
 sp_inside_fparens               = remove   # ignore/add/remove/force

 # Add or remove space inside function '(' and ')'.
 sp_inside_fparen                = remove   # ignore/add/remove/force

 # Add or remove space inside the first parentheses in a function type, as in
 # 'void (*x)(...)'.
 sp_inside_tparen                = remove   # ignore/add/remove/force

 # Add or remove space between the ')' and '(' in a function type, as in
 # 'void (*x)(...)'.
 sp_after_tparen_close           = remove   # ignore/add/remove/force

 # Add or remove space between ']' and '(' when part of a function call.
 sp_square_fparen                = ignore   # ignore/add/remove/force

 # Add or remove space between ')' and '{' of function.
 sp_fparen_brace                 = ignore    # ignore/add/remove/force

 # Add or remove space between ')' and '{' of s function call in object
 # initialization.
 #
 # Overrides sp_fparen_brace.
 sp_fparen_brace_initializer     = ignore   # ignore/add/remove/force

 # (Java) Add or remove space between ')' and '{{' of double brace initializer.
 sp_fparen_dbrace                = ignore   # ignore/add/remove/force

 # Add or remove space between function name and '(' on function calls.
 sp_func_call_paren              = ignore   # ignore/add/remove/force

 # Add or remove space between function name and '()' on function calls without
 # parameters. If set to ignore (the default), sp_func_call_paren is used.
 sp_func_call_paren_empty        = ignore   # ignore/add/remove/force

 # Add or remove space between the user function name and '(' on function
 # calls. You need to set a keyword to be a user function in the config file,
 # like:
 #   set func_call_user tr _ i18n
 sp_func_call_user_paren         = ignore   # ignore/add/remove/force

 # Add or remove space inside user function '(' and ')'.
 sp_func_call_user_inside_fparen = ignore   # ignore/add/remove/force

 # Add or remove space between nested parentheses with user functions,
 # i.e. '((' vs. '( ('.
 sp_func_call_user_paren_paren   = ignore   # ignore/add/remove/force

 # Add or remove space between a constructor/destructor and the open
 # parenthesis.
 sp_func_class_paren             = ignore   # ignore/add/remove/force

 # Add or remove space between a constructor without parameters or destructor
 # and '()'.
 sp_func_class_paren_empty       = ignore   # ignore/add/remove/force

 # Add or remove space between 'return' and '('.
 sp_return_paren                 = force    # ignore/add/remove/force

 # Add or remove space between 'return' and '{'.
 sp_return_brace                 = force    # ignore/add/remove/force

 # Add or remove space between '__attribute__' and '('.
 sp_attribute_paren              = remove   # ignore/add/remove/force

 # Add or remove space between 'defined' and '(' in '#if defined (FOO)'.
 sp_defined_paren                = force    # ignore/add/remove/force

 # Add or remove space between 'throw' and '(' in 'throw (something)'.
 sp_throw_paren                  = ignore   # ignore/add/remove/force

 # Add or remove space between 'throw' and anything other than '(' as in
 # '@throw [...];'.
 sp_after_throw                  = ignore   # ignore/add/remove/force

 # Add or remove space between 'catch' and '(' in 'catch (something) { }'.
 # If set to ignore, sp_before_sparen is used.
 sp_catch_paren                  = ignore   # ignore/add/remove/force

 # (OC) Add or remove space between '@catch' and '('
 # in '@catch (something) { }'. If set to ignore, sp_catch_paren is used.
 sp_oc_catch_paren               = ignore   # ignore/add/remove/force

 # (OC) Add or remove space before Objective-C protocol list
 # as in '@protocol Protocol<here><Protocol_A>' or '@interface MyClass : NSObject<here><MyProtocol>'.
 sp_before_oc_proto_list         = ignore   # ignore/add/remove/force

 # (OC) Add or remove space between class name and '('
 # in '@interface className(categoryName)<ProtocolName>:BaseClass'
 sp_oc_classname_paren           = ignore   # ignore/add/remove/force

 # (D) Add or remove space between 'version' and '('
 # in 'version (something) { }'. If set to ignore, sp_before_sparen is used.
 sp_version_paren                = ignore   # ignore/add/remove/force

 # (D) Add or remove space between 'scope' and '('
 # in 'scope (something) { }'. If set to ignore, sp_before_sparen is used.
 sp_scope_paren                  = ignore   # ignore/add/remove/force

 # Add or remove space between 'super' and '(' in 'super (something)'.
 #
 # Default: remove
 sp_super_paren                  = ignore   # ignore/add/remove/force

 # Add or remove space between 'this' and '(' in 'this (something)'.
 #
 # Default: remove
 sp_this_paren                   = ignore   # ignore/add/remove/force

 # Add or remove space between a macro name and its definition.
 sp_macro                        = force    # ignore/add/remove/force

 # Add or remove space between a macro function ')' and its definition.
 sp_macro_func                   = force    # ignore/add/remove/force

 # Add or remove space between 'else' and '{' if on the same line.
 sp_else_brace                   = force    # ignore/add/remove/force

 # Add or remove space between '}' and 'else' if on the same line.
 sp_brace_else                   = force    # ignore/add/remove/force

 # Add or remove space between '}' and the name of a typedef on the same line.
 sp_brace_typedef                = force    # ignore/add/remove/force

 # Add or remove space before the '{' of a 'catch' statement, if the '{' and
 # 'catch' are on the same line, as in 'catch (decl) <here> {'.
 sp_catch_brace                  = ignore   # ignore/add/remove/force

 # (OC) Add or remove space before the '{' of a '@catch' statement, if the '{'
 # and '@catch' are on the same line, as in '@catch (decl) <here> {'.
 # If set to ignore, sp_catch_brace is used.
 sp_oc_catch_brace               = ignore   # ignore/add/remove/force

 # Add or remove space between '}' and 'catch' if on the same line.
 sp_brace_catch                  = ignore   # ignore/add/remove/force

 # (OC) Add or remove space between '}' and '@catch' if on the same line.
 # If set to ignore, sp_brace_catch is used.
 sp_oc_brace_catch               = ignore   # ignore/add/remove/force

 # Add or remove space between 'finally' and '{' if on the same line.
 sp_finally_brace                = ignore   # ignore/add/remove/force

 # Add or remove space between '}' and 'finally' if on the same line.
 sp_brace_finally                = ignore   # ignore/add/remove/force

 # Add or remove space between 'try' and '{' if on the same line.
 sp_try_brace                    = ignore   # ignore/add/remove/force

 # Add or remove space between get/set and '{' if on the same line.
 sp_getset_brace                 = ignore   # ignore/add/remove/force

 # Add or remove space between a variable and '{' for C++ uniform
 # initialization.
 sp_word_brace_init_lst          = ignore   # ignore/add/remove/force

 # Add or remove space between a variable and '{' for a namespace.
 #
 # Default: add
 sp_word_brace_ns                = ignore   # ignore/add/remove/force

 # Add or remove space before the '::' operator.
 sp_before_dc                    = ignore   # ignore/add/remove/force

 # Add or remove space after the '::' operator.
 sp_after_dc                     = ignore   # ignore/add/remove/force

 # (D) Add or remove around the D named array initializer ':' operator.
 sp_d_array_colon                = remove   # ignore/add/remove/force

 # Add or remove space after the '!' (not) unary operator.
 #
 # Default: remove
 sp_not                          = remove   # ignore/add/remove/force

 # Add or remove space after the '~' (invert) unary operator.
 #
 # Default: remove
 sp_inv                          = remove   # ignore/add/remove/force

 # Add or remove space after the '&' (address-of) unary operator. This does not
 # affect the spacing after a '&' that is part of a type.
 #
 # Default: remove
 sp_addr                         = remove   # ignore/add/remove/force

 # Add or remove space around the '.' or '->' operators.
 #
 # Default: remove
 sp_member                       = remove   # ignore/add/remove/force

 # Add or remove space after the '*' (dereference) unary operator. This does
 # not affect the spacing after a '*' that is part of a type.
 #
 # Default: remove
 sp_deref                        = remove   # ignore/add/remove/force

 # Add or remove space after '+' or '-', as in 'x = -5' or 'y = +7'.
 #
 # Default: remove
 sp_sign                         = remove   # ignore/add/remove/force

 # Add or remove space between '++' and '--' the word to which it is being
 # applied, as in '(--x)' or 'y++;'.
 #
 # Default: remove
 sp_incdec                       = remove   # ignore/add/remove/force

 # Add or remove space before a backslash-newline at the end of a line.
 #
 # Default: add
 sp_before_nl_cont               = ignore   # ignore/add/remove/force

 # (OC) Add or remove space after the scope '+' or '-', as in '-(void) foo;'
 # or '+(int) bar;'.
 sp_after_oc_scope               = ignore   # ignore/add/remove/force

 # (OC) Add or remove space after the colon in message specs,
 # i.e. '-(int) f:(int) x;' vs. '-(int) f: (int) x;'.
 sp_after_oc_colon               = ignore   # ignore/add/remove/force

 # (OC) Add or remove space before the colon in message specs,
 # i.e. '-(int) f: (int) x;' vs. '-(int) f : (int) x;'.
 sp_before_oc_colon              = ignore   # ignore/add/remove/force

 # (OC) Add or remove space after the colon in immutable dictionary expression
 # 'NSDictionary *test = @{@"foo" :@"bar"};'.
 sp_after_oc_dict_colon          = ignore   # ignore/add/remove/force

 # (OC) Add or remove space before the colon in immutable dictionary expression
 # 'NSDictionary *test = @{@"foo" :@"bar"};'.
 sp_before_oc_dict_colon         = ignore   # ignore/add/remove/force

 # (OC) Add or remove space after the colon in message specs,
 # i.e. '[object setValue:1];' vs. '[object setValue: 1];'.
 sp_after_send_oc_colon          = ignore   # ignore/add/remove/force

 # (OC) Add or remove space before the colon in message specs,
 # i.e. '[object setValue:1];' vs. '[object setValue :1];'.
 sp_before_send_oc_colon         = ignore   # ignore/add/remove/force

 # (OC) Add or remove space after the (type) in message specs,
 # i.e. '-(int)f: (int) x;' vs. '-(int)f: (int)x;'.
 sp_after_oc_type                = ignore   # ignore/add/remove/force

 # (OC) Add or remove space after the first (type) in message specs,
 # i.e. '-(int) f:(int)x;' vs. '-(int)f:(int)x;'.
 sp_after_oc_return_type         = ignore   # ignore/add/remove/force

 # (OC) Add or remove space between '@selector' and '(',
 # i.e. '@selector(msgName)' vs. '@selector (msgName)'.
 # Also applies to '@protocol()' constructs.
 sp_after_oc_at_sel              = ignore   # ignore/add/remove/force

 # (OC) Add or remove space between '@selector(x)' and the following word,
 # i.e. '@selector(foo) a:' vs. '@selector(foo)a:'.
 sp_after_oc_at_sel_parens       = ignore   # ignore/add/remove/force

 # (OC) Add or remove space inside '@selector' parentheses,
 # i.e. '@selector(foo)' vs. '@selector( foo )'.
 # Also applies to '@protocol()' constructs.
 sp_inside_oc_at_sel_parens      = ignore   # ignore/add/remove/force

 # (OC) Add or remove space before a block pointer caret,
 # i.e. '^int (int arg){...}' vs. ' ^int (int arg){...}'.
 sp_before_oc_block_caret        = ignore   # ignore/add/remove/force

 # (OC) Add or remove space after a block pointer caret,
 # i.e. '^int (int arg){...}' vs. '^ int (int arg){...}'.
 sp_after_oc_block_caret         = ignore   # ignore/add/remove/force

 # (OC) Add or remove space between the receiver and selector in a message,
 # as in '[receiver selector ...]'.
 sp_after_oc_msg_receiver        = ignore   # ignore/add/remove/force

 # (OC) Add or remove space after '@property'.
 sp_after_oc_property            = ignore   # ignore/add/remove/force

 # (OC) Add or remove space between '@synchronized' and the open parenthesis,
 # i.e. '@synchronized(foo)' vs. '@synchronized (foo)'.
 sp_after_oc_synchronized        = ignore   # ignore/add/remove/force

 # Add or remove space around the ':' in 'b ? t : f'.
 sp_cond_colon                   = force    # ignore/add/remove/force

 # Add or remove space before the ':' in 'b ? t : f'.
 #
 # Overrides sp_cond_colon.
 sp_cond_colon_before            = ignore   # ignore/add/remove/force

 # Add or remove space after the ':' in 'b ? t : f'.
 #
 # Overrides sp_cond_colon.
 sp_cond_colon_after             = ignore   # ignore/add/remove/force

 # Add or remove space around the '?' in 'b ? t : f'.
 sp_cond_question                = force    # ignore/add/remove/force

 # Add or remove space before the '?' in 'b ? t : f'.
 #
 # Overrides sp_cond_question.
 sp_cond_question_before         = ignore    # ignore/add/remove/force

 # Add or remove space after the '?' in 'b ? t : f'.
 #
 # Overrides sp_cond_question.
 sp_cond_question_after          = ignore    # ignore/add/remove/force

 # In the abbreviated ternary form '(a ?: b)', add or remove space between '?'
 # and ':'.
 #
 # Overrides all other sp_cond_* options.
 sp_cond_ternary_short           = remove    # ignore/add/remove/force

 # Fix the spacing between 'case' and the label. Only 'ignore' and 'force' make
 # sense here.
 sp_case_label                   = force    # ignore/add/remove/force

 # (D) Add or remove space around the D '..' operator.
 sp_range                        = ignore   # ignore/add/remove/force

 # Add or remove space after ':' in a Java/C++11 range-based 'for',
 # as in 'for (Type var : expr)'.
 sp_after_for_colon              = ignore   # ignore/add/remove/force

 # Add or remove space before ':' in a Java/C++11 range-based 'for',
 # as in 'for (Type var : expr)'.
 sp_before_for_colon             = ignore   # ignore/add/remove/force

 # (D) Add or remove space between 'extern' and '(' as in 'extern (C)'.
 sp_extern_paren                 = ignore   # ignore/add/remove/force

 # Add or remove space after the opening of a C++ comment,
 # i.e. '// A' vs. '//A'.
 sp_cmt_cpp_start                = force    # ignore/add/remove/force

 # If true, space is added with sp_cmt_cpp_start will be added after doxygen
 # sequences like '///', '///<', '//!' and '//!<'.
 sp_cmt_cpp_doxygen              = true     # true/false

 # If true, space is added with sp_cmt_cpp_start will be added after Qt
 # translator or meta-data comments like '//:', '//=', and '//~'.
 sp_cmt_cpp_qttr                 = true     # true/false

 # Add or remove space between #else or #endif and a trailing comment.
 sp_endif_cmt                    = force    # ignore/add/remove/force

 # Add or remove space after 'new', 'delete' and 'delete[]'.
 sp_after_new                    = ignore   # ignore/add/remove/force

 # Add or remove space between 'new' and '(' in 'new()'.
 sp_between_new_paren            = ignore   # ignore/add/remove/force

 # Add or remove space between ')' and type in 'new(foo) BAR'.
 sp_after_newop_paren            = ignore   # ignore/add/remove/force

 # Add or remove space inside parenthesis of the new operator
 # as in 'new(foo) BAR'.
 sp_inside_newop_paren           = ignore   # ignore/add/remove/force

 # Add or remove space after the open parenthesis of the new operator,
 # as in 'new(foo) BAR'.
 #
 # Overrides sp_inside_newop_paren.
 sp_inside_newop_paren_open      = ignore   # ignore/add/remove/force

 # Add or remove space before the close parenthesis of the new operator,
 # as in 'new(foo) BAR'.
 #
 # Overrides sp_inside_newop_paren.
 sp_inside_newop_paren_close     = ignore   # ignore/add/remove/force

 # Add or remove space before a trailing or embedded comment.
 sp_before_tr_emb_cmt            = ignore   # ignore/add/remove/force

 # Number of spaces before a trailing or embedded comment.
 sp_num_before_tr_emb_cmt        = 0        # unsigned number

 # (Java) Add or remove space between an annotation and the open parenthesis.
 sp_annotation_paren             = ignore   # ignore/add/remove/force

 # If true, vbrace tokens are dropped to the previous token and skipped.
 sp_skip_vbrace_tokens           = false    # true/false

 # Add or remove space after 'noexcept'.
 sp_after_noexcept               = ignore   # ignore/add/remove/force

 # Add or remove space after '_'.
 sp_vala_after_translation       = ignore   # ignore/add/remove/force

 # If true, a <TAB> is inserted after #define.
 force_tab_after_define          = false    # true/false

 #
 # Indenting options
 #

 # The number of columns to indent per level. Usually 2, 3, 4, or 8.
 #
 # Default: 8
 indent_columns                  = 4        # unsigned number

 # The continuation indent. If non-zero, this overrides the indent of '(', '['
 # and '=' continuation indents. Negative values are OK; negative value is
 # absolute and not increased for each '(' or '[' level.
 #
 # For FreeBSD, this is set to 4.
 indent_continue                 = 8        # number

 # The continuation indent, only for class header line(s). If non-zero, this
 # overrides the indent of 'class' continuation indents.
 indent_continue_class_head      = 0        # unsigned number

 # Whether to indent empty lines (i.e. lines which contain only spaces before
 # the newline character).
 indent_single_newlines          = false    # true/false

 # The continuation indent for func_*_param if they are true. If non-zero, this
 # overrides the indent.
 indent_param                    = 0        # unsigned number

 # How to use tabs when indenting code.
 #
 # 0: Spaces only
 # 1: Indent with tabs to brace level, align with spaces (default)
 # 2: Indent and align with tabs, using spaces when not on a tabstop
 #
 # Default: 1
 indent_with_tabs                = 0        # unsigned number

 # Whether to indent comments that are not at a brace level with tabs on a
 # tabstop. Requires indent_with_tabs=2. If false, will use spaces.
 indent_cmt_with_tabs            = false    # true/false

 # Whether to indent strings broken by '\' so that they line up.
 indent_align_string             = false    # true/false

 # The number of spaces to indent multi-line XML strings.
 # Requires indent_align_string=true.
 indent_xml_string               = 2        # unsigned number

 # Spaces to indent '{' from level.
 indent_brace                    = 0        # unsigned number

 # Whether braces are indented to the body level.
 indent_braces                   = false    # true/false

 # Whether to disable indenting function braces if indent_braces=true.
 indent_braces_no_func           = false    # true/false

 # Whether to disable indenting class braces if indent_braces=true.
 indent_braces_no_class          = false    # true/false

 # Whether to disable indenting struct braces if indent_braces=true.
 indent_braces_no_struct         = false    # true/false

 # Whether to indent based on the size of the brace parent,
 # i.e. 'if' => 3 spaces, 'for' => 4 spaces, etc.
 indent_brace_parent             = false    # true/false

 # Whether to indent based on the open parenthesis instead of the open brace
 # in '({\n'.
 indent_paren_open_brace         = false    # true/false

 # (C#) Whether to indent the brace of a C# delegate by another level.
 indent_cs_delegate_brace        = false    # true/false

 # (C#) Whether to indent a C# delegate (to handle delegates with no brace) by
 # another level.
 indent_cs_delegate_body         = false    # true/false

 # Whether to indent the body of a 'namespace'.
 indent_namespace                = false    # true/false

 # Whether to indent only the first namespace, and not any nested namespaces.
 # Requires indent_namespace=true.
 indent_namespace_single_indent  = false    # true/false

 # The number of spaces to indent a namespace block.
 # If set to zero, use the value indent_columns
 indent_namespace_level          = 0        # unsigned number

 # If the body of the namespace is longer than this number, it won't be
 # indented. Requires indent_namespace=true. 0 means no limit.
 indent_namespace_limit          = 0        # unsigned number

 # Whether the 'extern "C"' body is indented.
 indent_extern                   = false    # true/false

 # Whether the 'class' body is indented.
 indent_class                    = false    # true/false

 # Whether to indent the stuff after a leading base class colon.
 indent_class_colon              = false    # true/false

 # Whether to indent based on a class colon instead of the stuff after the
 # colon. Requires indent_class_colon=true.
 indent_class_on_colon           = false    # true/false

 # Whether to indent the stuff after a leading class initializer colon.
 indent_constr_colon             = false    # true/false

 # Virtual indent from the ':' for member initializers.
 #
 # Default: 2
 indent_ctor_init_leading        = 0        # unsigned number

 # Additional indent for constructor initializer list.
 # Negative values decrease indent down to the first column.
 indent_ctor_init                = 0        # number

 # Whether to indent 'if' following 'else' as a new block under the 'else'.
 # If false, 'else\nif' is treated as 'else if' for indenting purposes.
 indent_else_if                  = false    # true/false

 # Amount to indent variable declarations after a open brace.
 #
 #  <0: Relative
 # >=0: Absolute
 indent_var_def_blk              = 0        # number

 # Whether to indent continued variable declarations instead of aligning.
 indent_var_def_cont             = false    # true/false

 # Whether to indent continued shift expressions ('<<' and '>>') instead of
 # aligning. Set align_left_shift=false when enabling this.
 indent_shift                    = false    # true/false

 # Whether to force indentation of function definitions to start in column 1.
 indent_func_def_force_col1      = false    # true/false

 # Whether to indent continued function call parameters one indent level,
 # rather than aligning parameters under the open parenthesis.
 indent_func_call_param          = false    # true/false

 # Whether to indent continued function definition parameters one indent level,
 # rather than aligning parameters under the open parenthesis.
 indent_func_def_param           = false    # true/false

 # for function definitions, only if indent_func_def_param is false
 # Allows to align params when appropriate and indent them when not
 # behave as if it was true if paren position is more than this value
 # if paren position is more than the option value
 indent_func_def_param_paren_pos_threshold = 0        # unsigned number

 # Whether to indent continued function call prototype one indent level,
 # rather than aligning parameters under the open parenthesis.
 indent_func_proto_param         = false    # true/false

 # Whether to indent continued function call declaration one indent level,
 # rather than aligning parameters under the open parenthesis.
 indent_func_class_param         = false    # true/false

 # Whether to indent continued class variable constructors one indent level,
 # rather than aligning parameters under the open parenthesis.
 indent_func_ctor_var_param      = false    # true/false

 # Whether to indent continued template parameter list one indent level,
 # rather than aligning parameters under the open parenthesis.
 indent_template_param           = false    # true/false

 # Double the indent for indent_func_xxx_param options.
 # Use both values of the options indent_columns and indent_param.
 indent_func_param_double        = false    # true/false

 # Indentation column for standalone 'const' qualifier on a function
 # prototype.
 indent_func_const               = 0        # unsigned number

 # Indentation column for standalone 'throw' qualifier on a function
 # prototype.
 indent_func_throw               = 0        # unsigned number

 # How to indent within a macro followed by a brace on the same line
 # This allows reducing the indent in macros that have (for example)
 # `do { ... } while (0)` blocks bracketing them.
 #
 # true:  add an indent for the brace on the same line as the macro
 # false: do not add an indent for the brace on the same line as the macro
 #
 # Default: true
 indent_macro_brace              = false    # true/false

 # The number of spaces to indent a continued '->' or '.'.
 # Usually set to 0, 1, or indent_columns.
 indent_member                   = 0        # unsigned number

 # Whether lines broken at '.' or '->' should be indented by a single indent.
 # The indent_member option will not be effective if this is set to true.
 indent_member_single            = false    # true/false

 # Spaces to indent single line ('//') comments on lines before code.
 indent_sing_line_comments       = 0        # unsigned number

 # When opening a paren for a control statement (if, for, while, etc), increase
 # the indent level by this value. Negative values decrease the indent level.
 indent_sparen_extra             = 0        # number

 # Whether to indent trailing single line ('//') comments relative to the code
 # instead of trying to keep the same absolute column.
 indent_relative_single_line_comments = false    # true/false

 # Spaces to indent 'case' from 'switch'. Usually 0 or indent_columns.
 indent_switch_case              = 0        # unsigned number

 # indent 'break' with 'case' from 'switch'.
 indent_switch_break_with_case   = false    # true/false

 # Whether to indent preprocessor statements inside of switch statements.
 #
 # Default: true
 indent_switch_pp                = false    # true/false

 # Spaces to shift the 'case' line, without affecting any other lines.
 # Usually 0.
 indent_case_shift               = 0        # unsigned number

 # Spaces to indent '{' from 'case'. By default, the brace will appear under
 # the 'c' in case. Usually set to 0 or indent_columns. Negative values are OK.
 indent_case_brace               = 0        # number

 # Whether to indent comments found in first column.
 indent_col1_comment             = false    # true/false

 # Whether to indent multi string literal in first column.
 indent_col1_multi_string_literal = false    # true/false

 # How to indent goto labels.
 #
 #  >0: Absolute column where 1 is the leftmost column
 # <=0: Subtract from brace indent
 #
 # Default: 1
 indent_label                    = 1        # number

 # How to indent access specifiers that are followed by a
 # colon.
 #
 #  >0: Absolute column where 1 is the leftmost column
 # <=0: Subtract from brace indent
 #
 # Default: 1
 indent_access_spec              = 1        # number

 # Whether to indent the code after an access specifier by one level.
 # If true, this option forces 'indent_access_spec=0'.
 indent_access_spec_body         = false    # true/false

 # If an open parenthesis is followed by a newline, whether to indent the next
 # line so that it lines up after the open parenthesis (not recommended).
 indent_paren_nl                 = false    # true/false

 # How to indent a close parenthesis after a newline.
 #
 # 0: Indent to body level (default)
 # 1: Align under the open parenthesis
 # 2: Indent to the brace level
 indent_paren_close              = 1        # unsigned number

 # Whether to indent the open parenthesis of a function definition,
 # if the parenthesis is on its own line.
 indent_paren_after_func_def     = false    # true/false

 # Whether to indent the open parenthesis of a function declaration,
 # if the parenthesis is on its own line.
 indent_paren_after_func_decl    = false    # true/false

 # Whether to indent the open parenthesis of a function call,
 # if the parenthesis is on its own line.
 indent_paren_after_func_call    = false    # true/false

 # Whether to indent a comma when inside a parenthesis.
 # If true, aligns under the open parenthesis.
 indent_comma_paren              = true     # true/false

 # Whether to indent a Boolean operator when inside a parenthesis.
 # If true, aligns under the open parenthesis.
 indent_bool_paren               = false    # true/false

 # Whether to indent a semicolon when inside a for parenthesis.
 # If true, aligns under the open for parenthesis.
 indent_semicolon_for_paren      = false    # true/false

 # Whether to align the first expression to following ones
 # if indent_bool_paren=true.
 indent_first_bool_expr          = false    # true/false

 # Whether to align the first expression to following ones
 # if indent_semicolon_for_paren=true.
 indent_first_for_expr           = false    # true/false

 # If an open square is followed by a newline, whether to indent the next line
 # so that it lines up after the open square (not recommended).
 indent_square_nl                = false    # true/false

 # (ESQL/C) Whether to preserve the relative indent of 'EXEC SQL' bodies.
 indent_preserve_sql             = false    # true/false

 # Whether to align continued statements at the '='. If false or if the '=' is
 # followed by a newline, the next line is indent one tab.
 #
 # Default: true
 indent_align_assign             = true     # true/false

 # If true, the indentation of the chunks after a '=' sequence will be set at
 # LHS token indentation column before '='.
 indent_off_after_assign         = false    # true/false

 # Whether to align continued statements at the '('. If false or the '(' is
 # followed by a newline, the next line indent is one tab.
 #
 # Default: true
 indent_align_paren              = true     # true/false

 # (OC) Whether to indent Objective-C code inside message selectors.
 indent_oc_inside_msg_sel        = false    # true/false

 # (OC) Whether to indent Objective-C blocks at brace level instead of usual
 # rules.
 indent_oc_block                 = false    # true/false

 # (OC) Indent for Objective-C blocks in a message relative to the parameter
 # name.
 #
 # =0: Use indent_oc_block rules
 # >0: Use specified number of spaces to indent
 indent_oc_block_msg             = 0        # unsigned number

 # (OC) Minimum indent for subsequent parameters
 indent_oc_msg_colon             = 0        # unsigned number

 # (OC) Whether to prioritize aligning with initial colon (and stripping spaces
 # from lines, if necessary).
 #
 # Default: true
 indent_oc_msg_prioritize_first_colon = true     # true/false

 # (OC) Whether to indent blocks the way that Xcode does by default
 # (from the keyword if the parameter is on its own line; otherwise, from the
 # previous indentation level). Requires indent_oc_block_msg=true.
 indent_oc_block_msg_xcode_style = false    # true/false

 # (OC) Whether to indent blocks from where the brace is, relative to a
 # message keyword. Requires indent_oc_block_msg=true.
 indent_oc_block_msg_from_keyword = false    # true/false

 # (OC) Whether to indent blocks from where the brace is, relative to a message
 # colon. Requires indent_oc_block_msg=true.
 indent_oc_block_msg_from_colon  = false    # true/false

 # (OC) Whether to indent blocks from where the block caret is.
 # Requires indent_oc_block_msg=true.
 indent_oc_block_msg_from_caret  = false    # true/false

 # (OC) Whether to indent blocks from where the brace caret is.
 # Requires indent_oc_block_msg=true.
 indent_oc_block_msg_from_brace  = false    # true/false

 # When indenting after virtual brace open and newline add further spaces to
 # reach this minimum indent.
 indent_min_vbrace_open          = 0        # unsigned number

 # Whether to add further spaces after regular indent to reach next tabstop
 # when identing after virtual brace open and newline.
 indent_vbrace_open_on_tabstop   = false    # true/false

 # How to indent after a brace followed by another token (not a newline).
 # true:  indent all contained lines to match the token
 # false: indent all contained lines to match the brace
 #
 # Default: true
 indent_token_after_brace        = false    # true/false

 # Whether to indent the body of a C++11 lambda.
 indent_cpp_lambda_body          = false    # true/false

 # How to indent compound literals that are being returned.
 # true: add both the indent from return & the compound literal open brace (ie:
 #       2 indent levels)
 # false: only indent 1 level, don't add the indent for the open brace, only add
 #        the indent for the return.
 #
 # Default: true
 indent_compound_literal_return  = true     # true/false

 # (C#) Whether to indent a 'using' block if no braces are used.
 #
 # Default: true
 indent_using_block              = true     # true/false

 # How to indent the continuation of ternary operator.
 #
 # 0: Off (default)
 # 1: When the `if_false` is a continuation, indent it under `if_false`
 # 2: When the `:` is a continuation, indent it under `?`
 indent_ternary_operator         = 2        # unsigned number

 # Whether to indent the statments inside ternary operator.
 indent_inside_ternary_operator  = false    # true/false

 # If true, the indentation of the chunks after a `return` sequence will be set at return indentation column.
 indent_off_after_return         = false    # true/false

 # If true, the indentation of the chunks after a `return new` sequence will be set at return indentation column.
 indent_off_after_return_new     = false    # true/false

 # If true, the tokens after return are indented with regular single indentation. By default (false) the indentation is after the return token.
 indent_single_after_return      = false    # true/false

 # Whether to ignore indent and alignment for 'asm' blocks (i.e. assume they
 # have their own indentation).
 indent_ignore_asm_block         = true     # true/false

 #
 # Newline adding and removing options
 #

 # Whether to collapse empty blocks between '{' and '}'.
 nl_collapse_empty_body          = true     # true/false

 # Don't split one-line braced assignments, as in 'foo_t f = { 1, 2 };'.
 nl_assign_leave_one_liners      = true     # true/false

 # Don't split one-line braced statements inside a 'class xx { }' body.
 nl_class_leave_one_liners       = true     # true/false

 # Don't split one-line enums, as in 'enum foo { BAR = 15 };'
 nl_enum_leave_one_liners        = true     # true/false

 # Don't split one-line get or set functions.
 nl_getset_leave_one_liners      = true     # true/false

 # (C#) Don't split one-line property get or set functions.
 nl_cs_property_leave_one_liners = true     # true/false

 # Don't split one-line function definitions, as in 'int foo() { return 0; }'.
 # might modify nl_func_type_name
 nl_func_leave_one_liners        = true     # true/false

 # Don't split one-line C++11 lambdas, as in '[]() { return 0; }'.
 nl_cpp_lambda_leave_one_liners  = true     # true/false

 # Don't split one-line if/else statements, as in 'if(...) b++;'.
 nl_if_leave_one_liners          = true     # true/false

 # Don't split one-line while statements, as in 'while(...) b++;'.
 nl_while_leave_one_liners       = true     # true/false

 # Don't split one-line for statements, as in 'for(...) b++;'.
 nl_for_leave_one_liners         = true     # true/false

 # (OC) Don't split one-line Objective-C messages.
 nl_oc_msg_leave_one_liner       = true     # true/false

 # (OC) Add or remove newline between method declaration and '{'.
 nl_oc_mdef_brace                = ignore   # ignore/add/remove/force

 # (OC) Add or remove newline between Objective-C block signature and '{'.
 nl_oc_block_brace               = ignore   # ignore/add/remove/force

 # (OC) Add or remove blank line before '@interface' statement.
 nl_oc_before_interface          = ignore   # ignore/add/remove/force

 # (OC) Add or remove blank line before '@implementation' statement.
 nl_oc_before_implementation     = ignore   # ignore/add/remove/force

 # (OC) Add or remove blank line before '@end' statement.
 nl_oc_before_end                = ignore   # ignore/add/remove/force

 # (OC) Add or remove newline between '@interface' and '{'.
 nl_oc_interface_brace           = ignore   # ignore/add/remove/force

 # (OC) Add or remove newline between '@implementation' and '{'.
 nl_oc_implementation_brace      = ignore   # ignore/add/remove/force

 # Add or remove newlines at the start of the file.
 nl_start_of_file                = ignore   # ignore/add/remove/force

 # The minimum number of newlines at the start of the file (only used if
 # nl_start_of_file is 'add' or 'force').
 nl_start_of_file_min            = 0        # unsigned number

 # Add or remove newline at the end of the file.
 nl_end_of_file                  = ignore    # ignore/add/remove/force

 # The minimum number of newlines at the end of the file (only used if
 # nl_end_of_file is 'add' or 'force').
 nl_end_of_file_min              = 0        # unsigned number

 # Add or remove newline between '=' and '{'.
 nl_assign_brace                 = ignore    # ignore/add/remove/force

 # (D) Add or remove newline between '=' and '['.
 nl_assign_square                = ignore   # ignore/add/remove/force

 # Add or remove newline between '[]' and '{'.
 nl_tsquare_brace                = ignore   # ignore/add/remove/force

 # (D) Add or remove newline after '= ['. Will also affect the newline before
 # the ']'.
 nl_after_square_assign          = ignore   # ignore/add/remove/force

 # Add or remove newline between a function call's ')' and '{', as in
 # 'list_for_each(item, &list) { }'.
 nl_fcall_brace                  = ignore   # ignore/add/remove/force

 # Add or remove newline between 'enum' and '{'.
 nl_enum_brace                   = ignore   # ignore/add/remove/force

 # Add or remove newline between 'enum' and 'class'.
 nl_enum_class                   = ignore   # ignore/add/remove/force

 # Add or remove newline between 'enum class' and the identifier.
 nl_enum_class_identifier        = ignore   # ignore/add/remove/force

 # Add or remove newline between 'enum class' type and ':'.
 nl_enum_identifier_colon        = ignore   # ignore/add/remove/force

 # Add or remove newline between 'enum class identifier :' and type.
 nl_enum_colon_type              = ignore   # ignore/add/remove/force

 # Add or remove newline between 'struct and '{'.
 nl_struct_brace                 = ignore   # ignore/add/remove/force

 # Add or remove newline between 'union' and '{'.
 nl_union_brace                  = ignore   # ignore/add/remove/force

 # Add or remove newline between 'if' and '{'.
 nl_if_brace                     = ignore   # ignore/add/remove/force

 # Add or remove newline between '}' and 'else'.
 nl_brace_else                   = remove   # ignore/add/remove/force

 # Add or remove newline between 'else if' and '{'. If set to ignore,
 # nl_if_brace is used instead.
 nl_elseif_brace                 = ignore   # ignore/add/remove/force

 # Add or remove newline between 'else' and '{'.
 nl_else_brace                   = ignore   # ignore/add/remove/force

 # Add or remove newline between 'else' and 'if'.
 nl_else_if                      = ignore   # ignore/add/remove/force

 # Add or remove newline before '{' opening brace
 nl_before_opening_brace_func_class_def = ignore   # ignore/add/remove/force

 # Add or remove newline before 'if'/'else if' closing parenthesis.
 nl_before_if_closing_paren      = ignore   # ignore/add/remove/force

 # Add or remove newline between '}' and 'finally'.
 nl_brace_finally                = ignore   # ignore/add/remove/force

 # Add or remove newline between 'finally' and '{'.
 nl_finally_brace                = ignore   # ignore/add/remove/force

 # Add or remove newline between 'try' and '{'.
 nl_try_brace                    = ignore   # ignore/add/remove/force

 # Add or remove newline between get/set and '{'.
 nl_getset_brace                 = ignore   # ignore/add/remove/force

 # Add or remove newline between 'for' and '{'.
 nl_for_brace                    = ignore   # ignore/add/remove/force

 # Add or remove newline before the '{' of a 'catch' statement, as in
 # 'catch (decl) <here> {'.
 nl_catch_brace                  = ignore   # ignore/add/remove/force

 # (OC) Add or remove newline before the '{' of a '@catch' statement, as in
 # '@catch (decl) <here> {'. If set to ignore, nl_catch_brace is used.
 nl_oc_catch_brace               = ignore   # ignore/add/remove/force

 # Add or remove newline between '}' and 'catch'.
 nl_brace_catch                  = ignore   # ignore/add/remove/force

 # (OC) Add or remove newline between '}' and '@catch'. If set to ignore,
 # nl_brace_catch is used.
 nl_oc_brace_catch               = ignore   # ignore/add/remove/force

 # Add or remove newline between '}' and ']'.
 nl_brace_square                 = ignore   # ignore/add/remove/force

 # Add or remove newline between '}' and ')' in a function invocation.
 nl_brace_fparen                 = ignore   # ignore/add/remove/force

 # Add or remove newline between 'while' and '{'.
 nl_while_brace                  = ignore   # ignore/add/remove/force

 # (D) Add or remove newline between 'scope (x)' and '{'.
 nl_scope_brace                  = ignore   # ignore/add/remove/force

 # (D) Add or remove newline between 'unittest' and '{'.
 nl_unittest_brace               = ignore   # ignore/add/remove/force

 # (D) Add or remove newline between 'version (x)' and '{'.
 nl_version_brace                = ignore   # ignore/add/remove/force

 # (C#) Add or remove newline between 'using' and '{'.
 nl_using_brace                  = ignore   # ignore/add/remove/force

 # Add or remove newline between two open or close braces. Due to general
 # newline/brace handling, REMOVE may not work.
 nl_brace_brace                  = ignore   # ignore/add/remove/force

 # Add or remove newline between 'do' and '{'.
 nl_do_brace                     = ignore   # ignore/add/remove/force

 # Add or remove newline between '}' and 'while' of 'do' statement.
 nl_brace_while                  = ignore   # ignore/add/remove/force

 # Add or remove newline between 'switch' and '{'.
 nl_switch_brace                 = ignore   # ignore/add/remove/force

 # Add or remove newline between 'synchronized' and '{'.
 nl_synchronized_brace           = ignore   # ignore/add/remove/force

 # Add a newline between ')' and '{' if the ')' is on a different line than the
 # if/for/etc.
 #
 # Overrides nl_for_brace, nl_if_brace, nl_switch_brace, nl_while_switch and
 # nl_catch_brace.
 nl_multi_line_cond              = false    # true/false

 # Add a newline after '(' if an if/for/while/switch condition spans multiple
 # lines
 nl_multi_line_sparen_open       = ignore   # ignore/add/remove/force

 # Add a newline before ')' if an if/for/while/switch condition spans multiple
 # lines. Overrides nl_before_if_closing_paren if both are specified.
 nl_multi_line_sparen_close      = ignore   # ignore/add/remove/force

 # Force a newline in a define after the macro name for multi-line defines.
 nl_multi_line_define            = false    # true/false

 # Whether to add a newline before 'case', and a blank line before a 'case'
 # statement that follows a ';' or '}'.
 nl_before_case                  = false    # true/false

 # Whether to add a newline after a 'case' statement.
 nl_after_case                   = false    # true/false

 # Add or remove newline between a case ':' and '{'.
 #
 # Overrides nl_after_case.
 nl_case_colon_brace             = ignore   # ignore/add/remove/force

 # Add or remove newline between ')' and 'throw'.
 nl_before_throw                 = ignore   # ignore/add/remove/force

 # Add or remove newline between 'namespace' and '{'.
 nl_namespace_brace              = ignore   # ignore/add/remove/force

 # Add or remove newline after 'template<...>' of a template class.
 nl_template_class               = ignore   # ignore/add/remove/force

 # Add or remove newline after 'template<...>' of a template class declaration.
 #
 # Overrides nl_template_class.
 nl_template_class_decl          = ignore   # ignore/add/remove/force

 # Add or remove newline after 'template<>' of a specialized class declaration.
 #
 # Overrides nl_template_class_decl.
 nl_template_class_decl_special  = ignore   # ignore/add/remove/force

 # Add or remove newline after 'template<...>' of a template class definition.
 #
 # Overrides nl_template_class.
 nl_template_class_def           = ignore   # ignore/add/remove/force

 # Add or remove newline after 'template<>' of a specialized class definition.
 #
 # Overrides nl_template_class_def.
 nl_template_class_def_special   = ignore   # ignore/add/remove/force

 # Add or remove newline after 'template<...>' of a template function.
 nl_template_func                = ignore   # ignore/add/remove/force

 # Add or remove newline after 'template<...>' of a template function
 # declaration.
 #
 # Overrides nl_template_func.
 nl_template_func_decl           = ignore   # ignore/add/remove/force

 # Add or remove newline after 'template<>' of a specialized function
 # declaration.
 #
 # Overrides nl_template_func_decl.
 nl_template_func_decl_special   = ignore   # ignore/add/remove/force

 # Add or remove newline after 'template<...>' of a template function
 # definition.
 #
 # Overrides nl_template_func.
 nl_template_func_def            = ignore   # ignore/add/remove/force

 # Add or remove newline after 'template<>' of a specialized function
 # definition.
 #
 # Overrides nl_template_func_def.
 nl_template_func_def_special    = ignore   # ignore/add/remove/force

 # Add or remove newline after 'template<...>' of a template variable.
 nl_template_var                 = ignore   # ignore/add/remove/force

 # Add or remove newline between 'template<...>' and 'using' of a templated
 # type alias.
 nl_template_using               = ignore   # ignore/add/remove/force

 # Add or remove newline between 'class' and '{'.
 nl_class_brace                  = ignore   # ignore/add/remove/force

 # Add or remove newline before or after (depending on pos_class_comma,
 # may not be IGNORE) each',' in the base class list.
 nl_class_init_args              = ignore   # ignore/add/remove/force

 # Add or remove newline after each ',' in the constructor member
 # initialization. Related to nl_constr_colon, pos_constr_colon and
 # pos_constr_comma.
 nl_constr_init_args             = ignore   # ignore/add/remove/force

 # Add or remove newline before first element, after comma, and after last
 # element, in 'enum'.
 nl_enum_own_lines               = ignore    # ignore/add/remove/force

 # Add or remove newline between return type and function name in a function
 # definition.
 # might be modified by nl_func_leave_one_liners
 nl_func_type_name               = ignore    # ignore/add/remove/force

 # Add or remove newline between return type and function name inside a class
 # definition. If set to ignore, nl_func_type_name or nl_func_proto_type_name
 # is used instead.
 nl_func_type_name_class         = ignore   # ignore/add/remove/force

 # Add or remove newline between class specification and '::'
 # in 'void A::f() { }'. Only appears in separate member implementation (does
 # not appear with in-line implementation).
 nl_func_class_scope             = ignore   # ignore/add/remove/force

 # Add or remove newline between function scope and name, as in
 # 'void A :: <here> f() { }'.
 nl_func_scope_name              = ignore   # ignore/add/remove/force

 # Add or remove newline between return type and function name in a prototype.
 nl_func_proto_type_name         = ignore   # ignore/add/remove/force

 # Add or remove newline between a function name and the opening '(' in the
 # declaration.
 nl_func_paren                   = ignore   # ignore/add/remove/force

 # Overrides nl_func_paren for functions with no parameters.
 nl_func_paren_empty             = ignore   # ignore/add/remove/force

 # Add or remove newline between a function name and the opening '(' in the
 # definition.
 nl_func_def_paren               = ignore   # ignore/add/remove/force

 # Overrides nl_func_def_paren for functions with no parameters.
 nl_func_def_paren_empty         = ignore   # ignore/add/remove/force

 # Add or remove newline between a function name and the opening '(' in the
 # call.
 nl_func_call_paren              = ignore   # ignore/add/remove/force

 # Overrides nl_func_call_paren for functions with no parameters.
 nl_func_call_paren_empty        = ignore   # ignore/add/remove/force

 # Add or remove newline after '(' in a function declaration.
 nl_func_decl_start              = ignore   # ignore/add/remove/force

 # Add or remove newline after '(' in a function definition.
 nl_func_def_start               = ignore   # ignore/add/remove/force

 # Overrides nl_func_decl_start when there is only one parameter.
 nl_func_decl_start_single       = ignore   # ignore/add/remove/force

 # Overrides nl_func_def_start when there is only one parameter.
 nl_func_def_start_single        = ignore   # ignore/add/remove/force

 # Whether to add a newline after '(' in a function declaration if '(' and ')'
 # are in different lines. If false, nl_func_decl_start is used instead.
 nl_func_decl_start_multi_line   = false    # true/false

 # Whether to add a newline after '(' in a function definition if '(' and ')'
 # are in different lines. If false, nl_func_def_start is used instead.
 nl_func_def_start_multi_line    = false    # true/false

 # Add or remove newline after each ',' in a function declaration.
 nl_func_decl_args               = ignore   # ignore/add/remove/force

 # Add or remove newline after each ',' in a function definition.
 nl_func_def_args                = ignore   # ignore/add/remove/force

 # Add or remove newline after each ',' in a function call.
 nl_func_call_args               = ignore   # ignore/add/remove/force

 # Whether to add a newline after each ',' in a function declaration if '('
 # and ')' are in different lines. If false, nl_func_decl_args is used instead.
 nl_func_decl_args_multi_line    = false    # true/false

 # Whether to add a newline after each ',' in a function definition if '('
 # and ')' are in different lines. If false, nl_func_def_args is used instead.
 nl_func_def_args_multi_line     = false    # true/false

 # Add or remove newline before the ')' in a function declaration.
 nl_func_decl_end                = ignore   # ignore/add/remove/force

 # Add or remove newline before the ')' in a function definition.
 nl_func_def_end                 = ignore   # ignore/add/remove/force

 # Overrides nl_func_decl_end when there is only one parameter.
 nl_func_decl_end_single         = ignore   # ignore/add/remove/force

 # Overrides nl_func_def_end when there is only one parameter.
 nl_func_def_end_single          = ignore   # ignore/add/remove/force

 # Whether to add a newline before ')' in a function declaration if '(' and ')'
 # are in different lines. If false, nl_func_decl_end is used instead.
 nl_func_decl_end_multi_line     = false    # true/false

 # Whether to add a newline before ')' in a function definition if '(' and ')'
 # are in different lines. If false, nl_func_def_end is used instead.
 nl_func_def_end_multi_line      = false    # true/false

 # Add or remove newline between '()' in a function declaration.
 nl_func_decl_empty              = ignore   # ignore/add/remove/force

 # Add or remove newline between '()' in a function definition.
 nl_func_def_empty               = ignore   # ignore/add/remove/force

 # Add or remove newline between '()' in a function call.
 nl_func_call_empty              = ignore   # ignore/add/remove/force

 # Whether to add a newline after '(' in a function call,
 # has preference over nl_func_call_start_multi_line.
 nl_func_call_start              = ignore   # ignore/add/remove/force

 # Whether to add a newline before ')' in a function call.
 nl_func_call_end                = ignore   # ignore/add/remove/force

 # Whether to add a newline after '(' in a function call if '(' and ')' are in
 # different lines.
 nl_func_call_start_multi_line   = false    # true/false

 # Whether to add a newline after each ',' in a function call if '(' and ')'
 # are in different lines.
 nl_func_call_args_multi_line    = false    # true/false

 # Whether to add a newline before ')' in a function call if '(' and ')' are in
 # different lines.
 nl_func_call_end_multi_line     = false    # true/false

 # Whether to respect nl_func_call_XXX option incase of closure args.
 nl_func_call_args_multi_line_ignore_closures = false    # true/false

 # Whether to add a newline after '<' of a template parameter list.
 nl_template_start               = false    # true/false

 # Whether to add a newline after each ',' in a template parameter list.
 nl_template_args                = false    # true/false

 # Whether to add a newline before '>' of a template parameter list.
 nl_template_end                 = false    # true/false

 # (OC) Whether to put each Objective-C message parameter on a separate line.
 # See nl_oc_msg_leave_one_liner.
 nl_oc_msg_args                  = false    # true/false

 # Add or remove newline between function signature and '{'.
 nl_fdef_brace                   = ignore    # ignore/add/remove/force

 # Add or remove newline between function signature and '{',
 # if signature ends with ')'. Overrides nl_fdef_brace.
 nl_fdef_brace_cond              = ignore   # ignore/add/remove/force

 # Add or remove newline between C++11 lambda signature and '{'.
 nl_cpp_ldef_brace               = ignore   # ignore/add/remove/force

 # Add or remove newline between 'return' and the return expression.
 nl_return_expr                  = ignore   # ignore/add/remove/force

 # Whether to add a newline after semicolons, except in 'for' statements.
 nl_after_semicolon              = false    # true/false

 # (Java) Add or remove newline between the ')' and '{{' of the double brace
 # initializer.
 nl_paren_dbrace_open            = ignore   # ignore/add/remove/force

 # Whether to add a newline after the type in an unnamed temporary
 # direct-list-initialization.
 nl_type_brace_init_lst          = ignore   # ignore/add/remove/force

 # Whether to add a newline after the open brace in an unnamed temporary
 # direct-list-initialization.
 nl_type_brace_init_lst_open     = ignore   # ignore/add/remove/force

 # Whether to add a newline before the close brace in an unnamed temporary
 # direct-list-initialization.
 nl_type_brace_init_lst_close    = ignore   # ignore/add/remove/force

 # Whether to add a newline after '{'. This also adds a newline before the
 # matching '}'.
 nl_after_brace_open             = false    # true/false

 # Whether to add a newline between the open brace and a trailing single-line
 # comment. Requires nl_after_brace_open=true.
 nl_after_brace_open_cmt         = false    # true/false

 # Whether to add a newline after a virtual brace open with a non-empty body.
 # These occur in un-braced if/while/do/for statement bodies.
 nl_after_vbrace_open            = false    # true/false

 # Whether to add a newline after a virtual brace open with an empty body.
 # These occur in un-braced if/while/do/for statement bodies.
 nl_after_vbrace_open_empty      = false    # true/false

 # Whether to add a newline after '}'. Does not apply if followed by a
 # necessary ';'.
 nl_after_brace_close            = false    # true/false

 # Whether to add a newline after a virtual brace close,
 # as in 'if (foo) a++; <here> return;'.
 nl_after_vbrace_close           = false    # true/false

 # Add or remove newline between the close brace and identifier,
 # as in 'struct { int a; } <here> b;'. Affects enumerations, unions and
 # structures. If set to ignore, uses nl_after_brace_close.
 nl_brace_struct_var             = ignore   # ignore/add/remove/force

 # Whether to alter newlines in '#define' macros.
 nl_define_macro                 = false    # true/false

 # Whether to alter newlines between consecutive parenthesis closes. The number
 # of closing parentheses in a line will depend on respective open parenthesis
 # lines.
 nl_squeeze_paren_close          = false    # true/false

 # Whether to remove blanks after '#ifxx' and '#elxx', or before '#elxx' and
 # '#endif'. Does not affect top-level #ifdefs.
 nl_squeeze_ifdef                = false    # true/false

 # Makes the nl_squeeze_ifdef option affect the top-level #ifdefs as well.
 nl_squeeze_ifdef_top_level      = false    # true/false

 # Add or remove blank line before 'if'.
 nl_before_if                    = ignore   # ignore/add/remove/force

 # Add or remove blank line after 'if' statement. Add/Force work only if the
 # next token is not a closing brace.
 nl_after_if                     = ignore   # ignore/add/remove/force

 # Add or remove blank line before 'for'.
 nl_before_for                   = ignore   # ignore/add/remove/force

 # Add or remove blank line after 'for' statement.
 nl_after_for                    = ignore   # ignore/add/remove/force

 # Add or remove blank line before 'while'.
 nl_before_while                 = ignore   # ignore/add/remove/force

 # Add or remove blank line after 'while' statement.
 nl_after_while                  = ignore   # ignore/add/remove/force

 # Add or remove blank line before 'switch'.
 nl_before_switch                = ignore   # ignore/add/remove/force

 # Add or remove blank line after 'switch' statement.
 nl_after_switch                 = ignore   # ignore/add/remove/force

 # Add or remove blank line before 'synchronized'.
 nl_before_synchronized          = ignore   # ignore/add/remove/force

 # Add or remove blank line after 'synchronized' statement.
 nl_after_synchronized           = ignore   # ignore/add/remove/force

 # Add or remove blank line before 'do'.
 nl_before_do                    = ignore   # ignore/add/remove/force

 # Add or remove blank line after 'do/while' statement.
 nl_after_do                     = ignore   # ignore/add/remove/force

 # Whether to put a blank line before 'return' statements, unless after an open
 # brace.
 nl_before_return                = false    # true/false

 # Whether to put a blank line after 'return' statements, unless followed by a
 # close brace.
 nl_after_return                 = false    # true/false

 # Whether to put a blank line before a member '.' or '->' operators.
 nl_before_member                = ignore   # ignore/add/remove/force

 # (Java) Whether to put a blank line after a member '.' or '->' operators.
 nl_after_member                 = ignore   # ignore/add/remove/force

 # Whether to double-space commented-entries in 'struct'/'union'/'enum'.
 nl_ds_struct_enum_cmt           = false    # true/false

 # Whether to force a newline before '}' of a 'struct'/'union'/'enum'.
 # (Lower priority than eat_blanks_before_close_brace.)
 nl_ds_struct_enum_close_brace   = false    # true/false

 # Add or remove newline before or after (depending on pos_class_colon) a class
 # colon, as in 'class Foo <here> : <or here> public Bar'.
 nl_class_colon                  = ignore   # ignore/add/remove/force

 # Add or remove newline around a class constructor colon. The exact position
 # depends on nl_constr_init_args, pos_constr_colon and pos_constr_comma.
 nl_constr_colon                 = ignore   # ignore/add/remove/force

 # Whether to collapse a two-line namespace, like 'namespace foo\n{ decl; }'
 # into a single line. If true, prevents other brace newline rules from turning
 # such code into four lines.
 nl_namespace_two_to_one_liner   = false    # true/false

 # Whether to remove a newline in simple unbraced if statements, turning them
 # into one-liners, as in 'if(b)\n i++;' => 'if(b) i++;'.
 nl_create_if_one_liner          = false    # true/false

 # Whether to remove a newline in simple unbraced for statements, turning them
 # into one-liners, as in 'for (...)\n stmt;' => 'for (...) stmt;'.
 nl_create_for_one_liner         = false    # true/false

 # Whether to remove a newline in simple unbraced while statements, turning
 # them into one-liners, as in 'while (expr)\n stmt;' => 'while (expr) stmt;'.
 nl_create_while_one_liner       = false    # true/false

 # Whether to collapse a function definition whose body (not counting braces)
 # is only one line so that the entire definition (prototype, braces, body) is
 # a single line.
 nl_create_func_def_one_liner    = false    # true/false

 # Whether to collapse a function definition whose body (not counting braces)
 # is only one line so that the entire definition (prototype, braces, body) is
 # a single line.
 nl_create_list_one_liner        = false    # true/false

 # Whether to split one-line simple unbraced if statements into two lines by
 # adding a newline, as in 'if(b) <here> i++;'.
 nl_split_if_one_liner           = false    # true/false

 # Whether to split one-line simple unbraced for statements into two lines by
 # adding a newline, as in 'for (...) <here> stmt;'.
 nl_split_for_one_liner          = false    # true/false

 # Whether to split one-line simple unbraced while statements into two lines by
 # adding a newline, as in 'while (expr) <here> stmt;'.
 nl_split_while_one_liner        = false    # true/false

 #
 # Blank line options
 #

 # The maximum number of consecutive newlines (3 = 2 blank lines).
 nl_max                          = 2        # unsigned number

 # The maximum number of consecutive newlines in a function.
 nl_max_blank_in_func            = 2        # unsigned number

 # The number of newlines before a function prototype.
 nl_before_func_body_proto       = 0        # unsigned number

 # The number of newlines before a multi-line function definition.
 nl_before_func_body_def         = 0        # unsigned number

 # The number of newlines before a class constructor/destructor prototype.
 nl_before_func_class_proto      = 0        # unsigned number

 # The number of newlines before a class constructor/destructor definition.
 nl_before_func_class_def        = 0        # unsigned number

 # The number of newlines after a function prototype.
 nl_after_func_proto             = 0        # unsigned number

 # The number of newlines after a function prototype, if not followed by
 # another function prototype.
 nl_after_func_proto_group       = 0        # unsigned number

 # The number of newlines after a class constructor/destructor prototype.
 nl_after_func_class_proto       = 0        # unsigned number

 # The number of newlines after a class constructor/destructor prototype,
 # if not followed by another constructor/destructor prototype.
 nl_after_func_class_proto_group = 0        # unsigned number

 # Whether one-line method definitions inside a class body should be treated
 # as if they were prototypes for the purposes of adding newlines.
 #
 # Requires nl_class_leave_one_liners=true. Overrides nl_before_func_body_def
 # and nl_before_func_class_def for one-liners.
 nl_class_leave_one_liner_groups = false    # true/false

 # The number of newlines after '}' of a multi-line function body.
 nl_after_func_body              = 2        # unsigned number

 # The number of newlines after '}' of a multi-line function body in a class
 # declaration. Also affects class constructors/destructors.
 #
 # Overrides nl_after_func_body.
 nl_after_func_body_class        = 2        # unsigned number

 # The number of newlines after '}' of a single line function body. Also
 # affects class constructors/destructors.
 #
 # Overrides nl_after_func_body and nl_after_func_body_class.
 nl_after_func_body_one_liner    = 2        # unsigned number

 # The number of blank lines after a block of variable definitions at the top
 # of a function body.
 #
 # 0: No change (default).
 nl_func_var_def_blk             = 0        # unsigned number

 # The number of newlines before a block of typedefs. If nl_after_access_spec
 # is non-zero, that option takes precedence.
 #
 # 0: No change (default).
 nl_typedef_blk_start            = 0        # unsigned number

 # The number of newlines after a block of typedefs.
 #
 # 0: No change (default).
 nl_typedef_blk_end              = 0        # unsigned number

 # The maximum number of consecutive newlines within a block of typedefs.
 #
 # 0: No change (default).
 nl_typedef_blk_in               = 0        # unsigned number

 # The number of newlines before a block of variable definitions not at the top
 # of a function body. If nl_after_access_spec is non-zero, that option takes
 # precedence.
 #
 # 0: No change (default).
 nl_var_def_blk_start            = 0        # unsigned number

 # The number of newlines after a block of variable definitions not at the top
 # of a function body.
 #
 # 0: No change (default).
 nl_var_def_blk_end              = 0        # unsigned number

 # The maximum number of consecutive newlines within a block of variable
 # definitions.
 #
 # 0: No change (default).
 nl_var_def_blk_in               = 0        # unsigned number

 # The minimum number of newlines before a multi-line comment.
 # Doesn't apply if after a brace open or another multi-line comment.
 nl_before_block_comment         = 0        # unsigned number

 # The minimum number of newlines before a single-line C comment.
 # Doesn't apply if after a brace open or other single-line C comments.
 nl_before_c_comment             = 0        # unsigned number

 # The minimum number of newlines before a CPP comment.
 # Doesn't apply if after a brace open or other CPP comments.
 nl_before_cpp_comment           = 0        # unsigned number

 # Whether to force a newline after a multi-line comment.
 nl_after_multiline_comment      = false    # true/false

 # Whether to force a newline after a label's colon.
 nl_after_label_colon            = false    # true/false

 # The number of newlines after '}' or ';' of a struct/enum/union definition.
 nl_after_struct                 = 1        # unsigned number

 # The number of newlines before a class definition.
 nl_before_class                 = 0        # unsigned number

 # The number of newlines after '}' or ';' of a class definition.
 nl_after_class                  = 0        # unsigned number

 # The number of newlines before a namespace.
 nl_before_namespace             = 0        # unsigned number

 # The number of newlines after '{' of a namespace. This also adds newlines
 # before the matching '}'.
 #
 # 0: Apply eat_blanks_after_open_brace or eat_blanks_before_close_brace if
 #     applicable, otherwise no change.
 #
 # Overrides eat_blanks_after_open_brace and eat_blanks_before_close_brace.
 nl_inside_namespace             = 0        # unsigned number

 # The number of newlines after '}' of a namespace.
 nl_after_namespace              = 0        # unsigned number

 # The number of newlines before an access specifier label. This also includes
 # the Qt-specific 'signals:' and 'slots:'. Will not change the newline count
 # if after a brace open.
 #
 # 0: No change (default).
 nl_before_access_spec           = 0        # unsigned number

 # The number of newlines after an access specifier label. This also includes
 # the Qt-specific 'signals:' and 'slots:'. Will not change the newline count
 # if after a brace open.
 #
 # 0: No change (default).
 #
 # Overrides nl_typedef_blk_start and nl_var_def_blk_start.
 nl_after_access_spec            = 0        # unsigned number

 # The number of newlines between a function definition and the function
 # comment, as in '// comment\n <here> void foo() {...}'.
 #
 # 0: No change (default).
 nl_comment_func_def             = 0        # unsigned number

 # The number of newlines after a try-catch-finally block that isn't followed
 # by a brace close.
 #
 # 0: No change (default).
 nl_after_try_catch_finally      = 0        # unsigned number

 # (C#) The number of newlines before and after a property, indexer or event
 # declaration.
 #
 # 0: No change (default).
 nl_around_cs_property           = 0        # unsigned number

 # (C#) The number of newlines between the get/set/add/remove handlers.
 #
 # 0: No change (default).
 nl_between_get_set              = 0        # unsigned number

 # (C#) Add or remove newline between property and the '{'.
 nl_property_brace               = ignore   # ignore/add/remove/force

 # Whether to remove blank lines after '{'.
 eat_blanks_after_open_brace     = false    # true/false

 # Whether to remove blank lines before '}'.
 eat_blanks_before_close_brace   = false    # true/false

 # How aggressively to remove extra newlines not in preprocessor.
 #
 # 0: No change (default)
 # 1: Remove most newlines not handled by other config
 # 2: Remove all newlines and reformat completely by config
 nl_remove_extra_newlines        = 0        # unsigned number

 # (Java) Add or remove newline after an annotation statement. Only affects
 # annotations that are after a newline.
 nl_after_annotation             = ignore   # ignore/add/remove/force

 # (Java) Add or remove newline between two annotations.
 nl_between_annotation           = ignore   # ignore/add/remove/force

 # The number of newlines before a whole-file #ifdef.
 #
 # 0: No change (default).
 nl_before_whole_file_ifdef      = 0        # unsigned number

 # The number of newlines after a whole-file #ifdef.
 #
 # 0: No change (default).
 nl_after_whole_file_ifdef       = 0        # unsigned number

 # The number of newlines before a whole-file #endif.
 #
 # 0: No change (default).
 nl_before_whole_file_endif      = 0        # unsigned number

 # The number of newlines after a whole-file #endif.
 #
 # 0: No change (default).
 nl_after_whole_file_endif       = 0        # unsigned number

 #
 # Positioning options
 #

 # The position of arithmetic operators in wrapped expressions.
 pos_arith                       = ignore   # ignore/break/force/lead/trail/join/lead_break/lead_force/trail_break/trail_force

 # The position of assignment in wrapped expressions. Do not affect '='
 # followed by '{'.
 pos_assign                      = ignore   # ignore/break/force/lead/trail/join/lead_break/lead_force/trail_break/trail_force

 # The position of Boolean operators in wrapped expressions.
 pos_bool                        = ignore   # ignore/break/force/lead/trail/join/lead_break/lead_force/trail_break/trail_force

 # The position of comparison operators in wrapped expressions.
 pos_compare                     = ignore   # ignore/break/force/lead/trail/join/lead_break/lead_force/trail_break/trail_force

 # The position of conditional operators, as in the '?' and ':' of
 # 'expr ? stmt : stmt', in wrapped expressions.
 pos_conditional                 = ignore   # ignore/break/force/lead/trail/join/lead_break/lead_force/trail_break/trail_force

 # The position of the comma in wrapped expressions.
 pos_comma                       = ignore   # ignore/break/force/lead/trail/join/lead_break/lead_force/trail_break/trail_force

 # The position of the comma in enum entries.
 pos_enum_comma                  = ignore   # ignore/break/force/lead/trail/join/lead_break/lead_force/trail_break/trail_force

 # The position of the comma in the base class list if there is more than one
 # line. Affects nl_class_init_args.
 pos_class_comma                 = ignore   # ignore/break/force/lead/trail/join/lead_break/lead_force/trail_break/trail_force

 # The position of the comma in the constructor initialization list.
 # Related to nl_constr_colon, nl_constr_init_args and pos_constr_colon.
 pos_constr_comma                = ignore   # ignore/break/force/lead/trail/join/lead_break/lead_force/trail_break/trail_force

 # The position of trailing/leading class colon, between class and base class
 # list. Affects nl_class_colon.
 pos_class_colon                 = ignore   # ignore/break/force/lead/trail/join/lead_break/lead_force/trail_break/trail_force

 # The position of colons between constructor and member initialization.
 # Related to nl_constr_colon, nl_constr_init_args and pos_constr_comma.
 pos_constr_colon                = ignore   # ignore/break/force/lead/trail/join/lead_break/lead_force/trail_break/trail_force

 #
 # Line splitting options
 #

 # Try to limit code width to N columns.
 code_width                      = 256      # unsigned number

 # Whether to fully split long 'for' statements at semi-colons.
 ls_for_split_full               = true     # true/false

 # Whether to fully split long function prototypes/calls at commas.
 # The option ls_code_width has priority over the option ls_func_split_full.
 ls_func_split_full              = false    # true/false

 # Whether to split lines as close to code_width as possible and ignore some
 # groupings.
 # The option ls_code_width has priority over the option ls_func_split_full.
 ls_code_width                   = false    # true/false

 #
 # Code alignment options (not left column spaces/tabs)
 #

 # Whether to keep non-indenting tabs.
 align_keep_tabs                 = false    # true/false

 # Whether to use tabs for aligning.
 align_with_tabs                 = false    # true/false

 # Whether to bump out to the next tab when aligning.
 align_on_tabstop                = true     # true/false

 # Whether to right-align numbers.
 align_number_right              = true     # true/false

 # Whether to keep whitespace not required for alignment.
 align_keep_extra_space          = false    # true/false

 # Whether to align variable definitions in prototypes and functions.
 align_func_params               = true     # true/false

 # The span for aligning parameter definitions in function on parameter name.
 #
 # 0: Don't align (default).
 align_func_params_span          = 1        # unsigned number

 # The threshold for aligning function parameter definitions.
 # Use a negative number for absolute thresholds.
 #
 # 0: No limit (default).
 align_func_params_thresh        = 0        # number

 # The gap for aligning function parameter definitions.
 align_func_params_gap           = 1        # unsigned number

 # The span for aligning constructor value.
 #
 # 0: Don't align (default).
 align_constr_value_span         = 0        # unsigned number

 # The threshold for aligning constructor value.
 # Use a negative number for absolute thresholds.
 #
 # 0: No limit (default).
 align_constr_value_thresh       = 0        # number

 # The gap for aligning constructor value.
 align_constr_value_gap          = 0        # unsigned number

 # Whether to align parameters in single-line functions that have the same
 # name. The function names must already be aligned with each other.
 align_same_func_call_params     = false    # true/false

 # The span for aligning function-call parameters for single line functions.
 #
 # 0: Don't align (default).
 align_same_func_call_params_span = 1        # unsigned number

 # The threshold for aligning function-call parameters for single line
 # functions.
 # Use a negative number for absolute thresholds.
 #
 # 0: No limit (default).
 align_same_func_call_params_thresh = 0        # number

 # The span for aligning variable definitions.
 #
 # 0: Don't align (default).
 align_var_def_span              = 0        # unsigned number

 # How to consider (or treat) the '*' in the alignment of variable definitions.
 #
 # 0: Part of the type     'void *   foo;' (default)
 # 1: Part of the variable 'void     *foo;'
 # 2: Dangling             'void    *foo;'
 # Dangling: the '*' will not be taken into account when aligning.
 align_var_def_star_style        = 1        # unsigned number

 # How to consider (or treat) the '&' in the alignment of variable definitions.
 #
 # 0: Part of the type     'long &   foo;' (default)
 # 1: Part of the variable 'long     &foo;'
 # 2: Dangling             'long    &foo;'
 # Dangling: the '&' will not be taken into account when aligning.
 align_var_def_amp_style         = 1        # unsigned number

 # The threshold for aligning variable definitions.
 # Use a negative number for absolute thresholds.
 #
 # 0: No limit (default).
 align_var_def_thresh            = 0        # number

 # The gap for aligning variable definitions.
 align_var_def_gap               = 0        # unsigned number

 # Whether to align the colon in struct bit fields.
 align_var_def_colon             = false    # true/false

 # The gap for aligning the colon in struct bit fields.
 align_var_def_colon_gap         = 0        # unsigned number

 # Whether to align any attribute after the variable name.
 align_var_def_attribute         = false    # true/false

 # Whether to align inline struct/enum/union variable definitions.
 align_var_def_inline            = false    # true/false

 # The span for aligning on '=' in assignments.
 #
 # 0: Don't align (default).
 align_assign_span               = 0        # unsigned number

 # The span for aligning on '=' in function prototype modifier.
 #
 # 0: Don't align (default).
 align_assign_func_proto_span    = 0        # unsigned number

 # The threshold for aligning on '=' in assignments.
 # Use a negative number for absolute thresholds.
 #
 # 0: No limit (default).
 align_assign_thresh             = 0        # number

 # How to apply align_assign_span to function declaration "assignments", i.e.
 # 'virtual void foo() = 0' or '~foo() = {default|delete}'.
 #
 # 0: Align with other assignments (default)
 # 1: Align with each other, ignoring regular assignments
 # 2: Don't align
 align_assign_decl_func          = 0        # unsigned number

 # The span for aligning on '=' in enums.
 #
 # 0: Don't align (default).
 align_enum_equ_span             = 0        # unsigned number

 # The threshold for aligning on '=' in enums.
 # Use a negative number for absolute thresholds.
 #
 # 0: no limit (default).
 align_enum_equ_thresh           = 0        # number

 # The span for aligning class member definitions.
 #
 # 0: Don't align (default).
 align_var_class_span            = 0        # unsigned number

 # The threshold for aligning class member definitions.
 # Use a negative number for absolute thresholds.
 #
 # 0: No limit (default).
 align_var_class_thresh          = 0        # number

 # The gap for aligning class member definitions.
 align_var_class_gap             = 0        # unsigned number

 # The span for aligning struct/union member definitions.
 #
 # 0: Don't align (default).
 align_var_struct_span           = 0        # unsigned number

 # The threshold for aligning struct/union member definitions.
 # Use a negative number for absolute thresholds.
 #
 # 0: No limit (default).
 align_var_struct_thresh         = 0        # number

 # The gap for aligning struct/union member definitions.
 align_var_struct_gap            = 0        # unsigned number

 # The span for aligning struct initializer values.
 #
 # 0: Don't align (default).
 align_struct_init_span          = 0        # unsigned number

 # The span for aligning single-line typedefs.
 #
 # 0: Don't align (default).
 align_typedef_span              = 0        # unsigned number

 # The minimum space between the type and the synonym of a typedef.
 align_typedef_gap               = 1        # unsigned number

 # How to align typedef'd functions with other typedefs.
 #
 # 0: Don't mix them at all (default)
 # 1: Align the open parenthesis with the types
 # 2: Align the function type name with the other type names
 align_typedef_func              = 0        # unsigned number

 # How to consider (or treat) the '*' in the alignment of typedefs.
 #
 # 0: Part of the typedef type, 'typedef int * pint;' (default)
 # 1: Part of type name:        'typedef int   *pint;'
 # 2: Dangling:                 'typedef int  *pint;'
 # Dangling: the '*' will not be taken into account when aligning.
 align_typedef_star_style        = 1        # unsigned number

 # How to consider (or treat) the '&' in the alignment of typedefs.
 #
 # 0: Part of the typedef type, 'typedef int & intref;' (default)
 # 1: Part of type name:        'typedef int   &intref;'
 # 2: Dangling:                 'typedef int  &intref;'
 # Dangling: the '&' will not be taken into account when aligning.
 align_typedef_amp_style         = 1        # unsigned number

 # The span for aligning comments that end lines.
 #
 # 0: Don't align (default).
 align_right_cmt_span            = 0        # unsigned number

 # Minimum number of columns between preceding text and a trailing comment in
 # order for the comment to qualify for being aligned. Must be non-zero to have
 # an effect.
 align_right_cmt_gap             = 0        # unsigned number

 # If aligning comments, whether to mix with comments after '}' and #endif with
 # less than three spaces before the comment.
 align_right_cmt_mix             = false    # true/false

 # Whether to only align trailing comments that are at the same brace level.
 align_right_cmt_same_level      = false    # true/false

 # Minimum column at which to align trailing comments. Comments which are
 # aligned beyond this column, but which can be aligned in a lesser column,
 # may be "pulled in".
 #
 # 0: Ignore (default).
 align_right_cmt_at_col          = 0        # unsigned number

 # The span for aligning function prototypes.
 #
 # 0: Don't align (default).
 align_func_proto_span           = 0        # unsigned number

 # The threshold for aligning function prototypes.
 # Use a negative number for absolute thresholds.
 #
 # 0: No limit (default).
 align_func_proto_thresh         = 0        # number

 # Minimum gap between the return type and the function name.
 align_func_proto_gap            = 1        # unsigned number

 # Whether to align function prototypes on the 'operator' keyword instead of
 # what follows.
 align_on_operator               = false    # true/false

 # Whether to mix aligning prototype and variable declarations. If true,
 # align_var_def_XXX options are used instead of align_func_proto_XXX options.
 align_mix_var_proto             = false    # true/false

 # Whether to align single-line functions with function prototypes.
 # Uses align_func_proto_span.
 align_single_line_func          = true     # true/false

 # Whether to align the open brace of single-line functions.
 # Requires align_single_line_func=true. Uses align_func_proto_span.
 align_single_line_brace         = true     # true/false

 # Gap for align_single_line_brace.
 align_single_line_brace_gap     = 1        # unsigned number

 # (OC) The span for aligning Objective-C message specifications.
 #
 # 0: Don't align (default).
 align_oc_msg_spec_span          = 0        # unsigned number

 # Whether to align macros wrapped with a backslash and a newline. This will
 # not work right if the macro contains a multi-line comment.
 align_nl_cont                   = false    # true/false

 # Whether to align macro functions and variables together.
 align_pp_define_together        = false    # true/false

 # The span for aligning on '#define' bodies.
 #
 # =0: Don't align (default)
 # >0: Number of lines (including comments) between blocks
 align_pp_define_span            = 0        # unsigned number

 # The minimum space between label and value of a preprocessor define.
 align_pp_define_gap             = 1        # unsigned number

 # Whether to align lines that start with '<<' with previous '<<'.
 #
 # Default: true
 align_left_shift                = false    # true/false

 # Whether to align text after 'asm volatile ()' colons.
 align_asm_colon                 = false    # true/false

 # (OC) Span for aligning parameters in an Objective-C message call
 # on the ':'.
 #
 # 0: Don't align.
 align_oc_msg_colon_span         = 0        # unsigned number

 # (OC) Whether to always align with the first parameter, even if it is too
 # short.
 align_oc_msg_colon_first        = false    # true/false

 # (OC) Whether to align parameters in an Objective-C '+' or '-' declaration
 # on the ':'.
 align_oc_decl_colon             = false    # true/false

 # (OC) Whether to not align parameters in an Objectve-C message call if first
 # colon is not on next line of the message call (the same way Xcode does
 # aligment)
 align_oc_msg_colon_xcode_like   = false    # true/false

 #
 # Comment modification options
 #

 # Try to wrap comments at N columns.
 cmt_width                       = 256      # unsigned number

 # How to reflow comments.
 #
 # 0: No reflowing (apart from the line wrapping due to cmt_width) (default)
 # 1: No touching at all
 # 2: Full reflow
 cmt_reflow_mode                 = 1        # unsigned number

 # Whether to convert all tabs to spaces in comments. If false, tabs in
 # comments are left alone, unless used for indenting.
 cmt_convert_tab_to_spaces       = false    # true/false

 # Whether to apply changes to multi-line comments, including cmt_width,
 # keyword substitution and leading chars.
 #
 # Default: true
 cmt_indent_multi                = false    # true/false

 # Whether to group c-comments that look like they are in a block.
 cmt_c_group                     = false    # true/false

 # Whether to put an empty '/*' on the first line of the combined c-comment.
 cmt_c_nl_start                  = false    # true/false

 # Whether to add a newline before the closing '*/' of the combined c-comment.
 cmt_c_nl_end                    = false    # true/false

 # Whether to change cpp-comments into c-comments.
 cmt_cpp_to_c                    = false    # true/false

 # Whether to group cpp-comments that look like they are in a block. Only
 # meaningful if cmt_cpp_to_c=true.
 cmt_cpp_group                   = false    # true/false

 # Whether to put an empty '/*' on the first line of the combined cpp-comment
 # when converting to a c-comment.
 #
 # Requires cmt_cpp_to_c=true and cmt_cpp_group=true.
 cmt_cpp_nl_start                = false    # true/false

 # Whether to add a newline before the closing '*/' of the combined cpp-comment
 # when converting to a c-comment.
 #
 # Requires cmt_cpp_to_c=true and cmt_cpp_group=true.
 cmt_cpp_nl_end                  = false    # true/false

 # Whether to put a star on subsequent comment lines.
 cmt_star_cont                   = false    # true/false

 # The number of spaces to insert at the start of subsequent comment lines.
 cmt_sp_before_star_cont         = 0        # unsigned number

 # The number of spaces to insert after the star on subsequent comment lines.
 cmt_sp_after_star_cont          = 3        # unsigned number

 # For multi-line comments with a '*' lead, remove leading spaces if the first
 # and last lines of the comment are the same length.
 #
 # Default: true
 cmt_multi_check_last            = false    # true/false

 # For multi-line comments with a '*' lead, remove leading spaces if the first
 # and last lines of the comment are the same length AND if the length is
 # bigger as the first_len minimum.
 #
 # Default: 4
 cmt_multi_first_len_minimum     = 4        # unsigned number

 # Path to a file that contains text to insert at the beginning of a file if
 # the file doesn't start with a C/C++ comment. If the inserted text contains
 # '$(filename)', that will be replaced with the current file's name.
 cmt_insert_file_header          = ""         # string

 # Path to a file that contains text to insert at the end of a file if the
 # file doesn't end with a C/C++ comment. If the inserted text contains
 # '$(filename)', that will be replaced with the current file's name.
 cmt_insert_file_footer          = ""         # string

 # Path to a file that contains text to insert before a function definition if
 # the function isn't preceded by a C/C++ comment. If the inserted text
 # contains '$(function)', '$(javaparam)' or '$(fclass)', these will be
 # replaced with, respectively, the name of the function, the javadoc '@param'
 # and '@return' stuff, or the name of the class to which the member function
 # belongs.
 cmt_insert_func_header          = ""         # string

 # Path to a file that contains text to insert before a class if the class
 # isn't preceded by a C/C++ comment. If the inserted text contains '$(class)',
 # that will be replaced with the class name.
 cmt_insert_class_header         = ""         # string

 # Path to a file that contains text to insert before an Objective-C message
 # specification, if the method isn't preceded by a C/C++ comment. If the
 # inserted text contains '$(message)' or '$(javaparam)', these will be
 # replaced with, respectively, the name of the function, or the javadoc
 # '@param' and '@return' stuff.
 cmt_insert_oc_msg_header        = ""         # string

 # Whether a comment should be inserted if a preprocessor is encountered when
 # stepping backwards from a function name.
 #
 # Applies to cmt_insert_oc_msg_header, cmt_insert_func_header and
 # cmt_insert_class_header.
 cmt_insert_before_preproc       = false    # true/false

 # Whether a comment should be inserted if a function is declared inline to a
 # class definition.
 #
 # Applies to cmt_insert_func_header.
 #
 # Default: true
 cmt_insert_before_inlines       = false    # true/false

 # Whether a comment should be inserted if the function is a class constructor
 # or destructor.
 #
 # Applies to cmt_insert_func_header.
 cmt_insert_before_ctor_dtor     = false    # true/false

 #
 # Code modifying options (non-whitespace)
 #

 # Add or remove braces on a single-line 'do' statement.
 mod_full_brace_do               = ignore    # ignore/add/remove/force

 # Add or remove braces on a single-line 'for' statement.
 mod_full_brace_for              = ignore    # ignore/add/remove/force

 # (Pawn) Add or remove braces on a single-line function definition.
 mod_full_brace_function         = ignore    # ignore/add/remove/force

 # Add or remove braces on a single-line 'if' statement. Braces will not be
 # removed if the braced statement contains an 'else'.
 mod_full_brace_if               = ignore    # ignore/add/remove/force

 # Whether to enforce that all blocks of an 'if'/'else if'/'else' chain either
 # have, or do not have, braces. If true, braces will be added if any block
 # needs braces, and will only be removed if they can be removed from all
 # blocks.
 #
 # Overrides mod_full_brace_if.
 mod_full_brace_if_chain         = false    # true/false

 # Whether to add braces to all blocks of an 'if'/'else if'/'else' chain.
 # If true, mod_full_brace_if_chain will only remove braces from an 'if' that
 # does not have an 'else if' or 'else'.
 mod_full_brace_if_chain_only    = false    # true/false

 # Add or remove braces on single-line 'while' statement.
 mod_full_brace_while            = ignore    # ignore/add/remove/force

 # Add or remove braces on single-line 'using ()' statement.
 mod_full_brace_using            = ignore    # ignore/add/remove/force

 # Don't remove braces around statements that span N newlines
 mod_full_brace_nl               = 0        # unsigned number

 # Whether to prevent removal of braces from 'if'/'for'/'while'/etc. blocks
 # which span multiple lines.
 #
 # Affects:
 #   mod_full_brace_for
 #   mod_full_brace_if
 #   mod_full_brace_if_chain
 #   mod_full_brace_if_chain_only
 #   mod_full_brace_while
 #   mod_full_brace_using
 #
 # Does not affect:
 #   mod_full_brace_do
 #   mod_full_brace_function
 mod_full_brace_nl_block_rem_mlcond = false    # true/false

 # Add or remove unnecessary parenthesis on 'return' statement.
 mod_paren_on_return             = ignore   # ignore/add/remove/force

 # (Pawn) Whether to change optional semicolons to real semicolons.
 mod_pawn_semicolon              = false    # true/false

 # Whether to fully parenthesize Boolean expressions in 'while' and 'if'
 # statement, as in 'if (a && b > c)' => 'if (a && (b > c))'.
 mod_full_paren_if_bool          = false    # true/false

 # Whether to remove superfluous semicolons.
 mod_remove_extra_semicolon      = false    # true/false

 # If a function body exceeds the specified number of newlines and doesn't have
 # a comment after the close brace, a comment will be added.
 mod_add_long_function_closebrace_comment = 0        # unsigned number

 # If a namespace body exceeds the specified number of newlines and doesn't
 # have a comment after the close brace, a comment will be added.
 mod_add_long_namespace_closebrace_comment = 0        # unsigned number

 # If a class body exceeds the specified number of newlines and doesn't have a
 # comment after the close brace, a comment will be added.
 mod_add_long_class_closebrace_comment = 0        # unsigned number

 # If a switch body exceeds the specified number of newlines and doesn't have a
 # comment after the close brace, a comment will be added.
 mod_add_long_switch_closebrace_comment = 0        # unsigned number

 # If an #ifdef body exceeds the specified number of newlines and doesn't have
 # a comment after the #endif, a comment will be added.
 mod_add_long_ifdef_endif_comment = 0        # unsigned number

 # If an #ifdef or #else body exceeds the specified number of newlines and
 # doesn't have a comment after the #else, a comment will be added.
 mod_add_long_ifdef_else_comment = 0        # unsigned number

 # Whether to take care of the case by the mod_sort_xx options.
 mod_sort_case_sensitive         = false    # true/false

 # Whether to sort consecutive single-line 'import' statements.
 mod_sort_import                 = false    # true/false

 # (C#) Whether to sort consecutive single-line 'using' statements.
 mod_sort_using                  = false    # true/false

 # Whether to sort consecutive single-line '#include' statements (C/C++) and
 # '#import' statements (Objective-C). Be aware that this has the potential to
 # break your code if your includes/imports have ordering dependencies.
 mod_sort_include                = false    # true/false

 # Whether to prioritize '#include' and '#import' statements that contain
 # filename without extension when sorting is enabled.
 mod_sort_incl_import_prioritize_filename = false    # true/false

 # Whether to prioritize '#include' and '#import' statements that does not
 # contain extensions when sorting is enabled.
 mod_sort_incl_import_prioritize_extensionless = false    # true/false

 # Whether to prioritize '#include' and '#import' statements that contain
 # angle over quotes when sorting is enabled.
 mod_sort_incl_import_prioritize_angle_over_quotes = true     # true/false

 # Whether to ignore file extension in '#include' and '#import' statements
 # for sorting comparison.
 mod_sort_incl_import_ignore_extension = true     # true/false

 # Whether to group '#include' and '#import' statements when sorting is enabled.
 mod_sort_incl_import_grouping_enabled = false    # true/false

 # Whether to move a 'break' that appears after a fully braced 'case' before
 # the close brace, as in 'case X: { ... } break;' => 'case X: { ... break; }'.
 mod_move_case_break             = false    # true/false

 # Add or remove braces around a fully braced case statement. Will only remove
 # braces if there are no variable declarations in the block.
 mod_case_brace                  = ignore   # ignore/add/remove/force

 # Whether to remove a void 'return;' that appears as the last statement in a
 # function.
 mod_remove_empty_return         = false    # true/false

 # Add or remove the comma after the last value of an enumeration.
 mod_enum_last_comma             = ignore    # ignore/add/remove/force

 # (OC) Whether to organize the properties. If true, properties will be
 # rearranged according to the mod_sort_oc_property_*_weight factors.
 mod_sort_oc_properties          = false    # true/false

 # (OC) Weight of a class property modifier.
 mod_sort_oc_property_class_weight = 0        # number

 # (OC) Weight of 'atomic' and 'nonatomic'.
 mod_sort_oc_property_thread_safe_weight = 0        # number

 # (OC) Weight of 'readwrite' when organizing properties.
 mod_sort_oc_property_readwrite_weight = 0        # number

 # (OC) Weight of a reference type specifier ('retain', 'copy', 'assign',
 # 'weak', 'strong') when organizing properties.
 mod_sort_oc_property_reference_weight = 0        # number

 # (OC) Weight of getter type ('getter=') when organizing properties.
 mod_sort_oc_property_getter_weight = 0        # number

 # (OC) Weight of setter type ('setter=') when organizing properties.
 mod_sort_oc_property_setter_weight = 0        # number

 # (OC) Weight of nullability type ('nullable', 'nonnull', 'null_unspecified',
 # 'null_resettable') when organizing properties.
 mod_sort_oc_property_nullability_weight = 0        # number

 #
 # Preprocessor options
 #

 # Add or remove indentation of preprocessor directives inside #if blocks
 # at brace level 0 (file-level).
 pp_indent                       = ignore    # ignore/add/remove/force

 # Whether to indent #if/#else/#endif at the brace level. If false, these are
 # indented from column 1.
 pp_indent_at_level              = false    # true/false

 # Specifies the number of columns to indent preprocessors per level
 # at brace level 0 (file-level). If pp_indent_at_level=false, also specifies
 # the number of columns to indent preprocessors per level
 # at brace level > 0 (function-level).
 #
 # Default: 1
 pp_indent_count                 = 0        # unsigned number

 # Add or remove space after # based on pp_level of #if blocks.
 pp_space                        = ignore    # ignore/add/remove/force

 # Sets the number of spaces per level added with pp_space.
 pp_space_count                  = 0        # unsigned number

 # The indent for '#region' and '#endregion' in C# and '#pragma region' in
 # C/C++. Negative values decrease indent down to the first column.
 pp_indent_region                = 0        # number

 # Whether to indent the code between #region and #endregion.
 pp_region_indent_code           = false    # true/false

 # If pp_indent_at_level=true, sets the indent for #if, #else and #endif when
 # not at file-level. Negative values decrease indent down to the first column.
 #
 # =0: Indent preprocessors using output_tab_size
 # >0: Column at which all preprocessors will be indented
 pp_indent_if                    = 0        # number

 # Whether to indent the code between #if, #else and #endif.
 pp_if_indent_code               = false    # true/false

 # Whether to indent '#define' at the brace level. If false, these are
 # indented from column 1.
 pp_define_at_level              = false    # true/false

 # Whether to ignore the '#define' body while formatting.
 pp_ignore_define_body           = true     # true/false

 # Whether to indent case statements between #if, #else, and #endif.
 # Only applies to the indent of the preprocesser that the case statements
 # directly inside of.
 #
 # Default: true
 pp_indent_case                  = false    # true/false

 # Whether to indent whole function definitions between #if, #else, and #endif.
 # Only applies to the indent of the preprocesser that the function definition
 # is directly inside of.
 #
 # Default: true
 pp_indent_func_def              = false    # true/false

 # Whether to indent extern C blocks between #if, #else, and #endif.
 # Only applies to the indent of the preprocesser that the extern block is
 # directly inside of.
 #
 # Default: true
 pp_indent_extern                = false    # true/false

 # Whether to indent braces directly inside #if, #else, and #endif.
 # Only applies to the indent of the preprocesser that the braces are directly
 # inside of.
 #
 # Default: true
 pp_indent_brace                 = false    # true/false

 #
 # Sort includes options
 #

 # The regex for include category with priority 0.
 include_category_0              = ""         # string

 # The regex for include category with priority 1.
 include_category_1              = ""         # string

 # The regex for include category with priority 2.
 include_category_2              = ""         # string

 #
 # Use or Do not Use options
 #

 # true:  indent_func_call_param will be used (default)
 # false: indent_func_call_param will NOT be used
 #
 # Default: true
 use_indent_func_call_param      = false    # true/false

 # The value of the indentation for a continuation line is calculated
 # differently if the statement is:
 # - a declaration: your case with QString fileName ...
 # - an assignment: your case with pSettings = new QSettings( ...
 #
 # At the second case the indentation value might be used twice:
 # - at the assignment
 # - at the function call (if present)
 #
 # To prevent the double use of the indentation value, use this option with the
 # value 'true'.
 #
 # true:  indent_continue will be used only once
 # false: indent_continue will be used every time (default)
 use_indent_continue_only_once   = false    # true/false

 # The value might be used twice:
 # - at the assignment
 # - at the opening brace
 #
 # To prevent the double use of the indentation value, use this option with the
 # value 'true'.
 #
 # true:  indentation will be used only once
 # false: indentation will be used every time (default)
 indent_cpp_lambda_only_once     = false    # true/false

 # Whether sp_after_angle takes precedence over sp_inside_fparen. This was the
 # historic behavior, but is probably not the desired behavior, so this is off
 # by default.
 use_sp_after_angle_always       = false    # true/false

 # Whether to apply special formatting for Qt SIGNAL/SLOT macros. Essentially,
 # this tries to format these so that they match Qt's normalized form (i.e. the
 # result of QMetaObject::normalizedSignature), which can slightly improve the
 # performance of the QObject::connect call, rather than how they would
 # otherwise be formatted.
 #
 # See options_for_QT.cpp for details.
 #
 # Default: true
 use_options_overriding_for_qt_macros = false    # true/false

 # If true: the form feed character is removed from the list
 # of whitespace characters.
 # See https://en.cppreference.com/w/cpp/string/byte/isspace
 use_form_feed_no_more_as_whitespace_character = false    # true/false

 #
 # Warn levels - 1: error, 2: warning (default), 3: note
 #

 # (C#) Warning is given if doing tab-to-\t replacement and we have found one
 # in a C# verbatim string literal.
 #
 # Default: 2
 warn_level_tabs_found_in_verbatim_string_literals = 2        # unsigned number

 # Limit the number of loops.
 # Used by uncrustify.cpp to exit from infinite loop.
 # 0: no limit.
 debug_max_number_of_loops       = 0        # number

 # Set the number of the line to protocol;
 # Used in the function prot_the_line if the 2. parameter is zero.
 # 0: nothing protocol.
 debug_line_number_to_protocol   = 0        # number

 # Meaning of the settings:
 #   Ignore - do not do any changes
 #   Add    - makes sure there is 1 or more space/brace/newline/etc
 #   Force  - makes sure there is exactly 1 space/brace/newline/etc,
 #            behaves like Add in some contexts
 #   Remove - removes space/brace/newline/etc
 #
 #
 # - Token(s) can be treated as specific type(s) with the 'set' option:
 #     `set tokenType tokenString [tokenString...]`
 #
 #     Example:
 #       `set BOOL __AND__ __OR__`
 #
 #     tokenTypes are defined in src/token_enum.h, use them without the
 #     'CT_' prefix: 'CT_BOOL' => 'BOOL'
 #
 #
 # - Token(s) can be treated as type(s) with the 'type' option.
 #     `type tokenString [tokenString...]`
 #
 #     Example:
 #       `type int c_uint_8 Rectangle`
 #
 #     This can also be achieved with `set TYPE int c_uint_8 Rectangle`
 #
 #
 # To embed whitespace in tokenStrings use the '\' escape character, or quote
 # the tokenStrings. These quotes are supported: "'`
 #
 #
 # - Support for the auto detection of languages through the file ending can be
 #   added using the 'file_ext' command.
 #     `file_ext langType langString [langString..]`
 #
 #     Example:
 #       `file_ext CPP .ch .cxx .cpp.in`
 #
 #     langTypes are defined in uncrusify_types.h in the lang_flag_e enum, use
 #     them without the 'LANG_' prefix: 'LANG_CPP' => 'CPP'
 #
 #
 # - Custom macro-based indentation can be set up using 'macro-open',
 #   'macro-else' and 'macro-close'.
 #     `(macro-open | macro-else | macro-close) tokenString`
 #
 #     Example:
 #       `macro-open  BEGIN_TEMPLATE_MESSAGE_MAP`
 #       `macro-open  BEGIN_MESSAGE_MAP`
 #       `macro-close END_MESSAGE_MAP`
 #
 #
 # option(s) with 'not default' value: 232
 #