src/session_p.h

/**
 * @file session_p.h
 * @author Radek Krejci <rkrejci@cesnet.cz>
 * @author Michal Vasko <mvasko@cesnet.cz>
 * @brief libnetconf2 session manipulation
 *
 * @copyright
 * Copyright (c) 2017 - 2023 CESNET, z.s.p.o.
 *
 * This source code is licensed under BSD 3-Clause License (the "License").
 * You may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *     https://opensource.org/licenses/BSD-3-Clause
 */

#ifndef NC_SESSION_PRIVATE_H_
#define NC_SESSION_PRIVATE_H_

#define _GNU_SOURCE

#include <pthread.h>
#include <stdint.h>
#include <sys/stat.h>

#include <libyang/libyang.h>

#include "compat.h"
#include "libnetconf.h"
#include "messages_client.h"
#include "netconf.h"
#include "session.h"
#include "session_client.h"

#ifdef NC_ENABLED_SSH

# include <libssh/callbacks.h>
# include <libssh/libssh.h>
# include <libssh/server.h>

/* seconds */
# define NC_SSH_TIMEOUT 10
/* number of all supported authentication methods */
# define NC_SSH_AUTH_COUNT 3

/**
 * Enumeration of diff operation types.
 */
typedef enum {
    NC_OP_NONE,
    NC_OP_CREATE,
    NC_OP_DELETE,
    NC_OP_REPLACE
} NC_OPERATION;

/**
 * Enumeration of key or certificate store type.
 */
typedef enum {
    NC_STORE_LOCAL,     /**< key/certificate is stored locally in the ietf-netconf-server YANG data */
    NC_STORE_KEYSTORE,  /**< key/certificate is stored externally in a keystore module YANG data */
    NC_STORE_TRUSTSTORE /**< key/certificate is stored externally in a truststore module YANG data */
} NC_STORE_TYPE;

/**
 * Enumeration of SSH public key representation types.
 */
typedef enum {
    NC_SSH_PUBKEY_SSH2, /**< begins with BEGIN SSH2 PUBLICKEY, see RFC 4716 */
    NC_SSH_PUBKEY_X509 /**< begins with BEGIN PUBLICKEY, see RFC 5280 sec. 4.1.2.7 */
} NC_SSH_PUBKEY_TYPE;

/* ACCESS unlocked */
struct nc_client_ssh_opts {
    /* SSH authentication method preferences */
    struct {
        NC_SSH_AUTH_TYPE type;
        int16_t value;
    } auth_pref[NC_SSH_AUTH_COUNT];

    /* SSH key pairs */
    struct {
        char *pubkey_path;
        char *privkey_path;
        int8_t privkey_crypt;
    } *keys;
    uint16_t key_count;

    /* SSH authentication callbacks */
    int (*auth_hostkey_check)(const char *, ssh_session, void *);
    char *(*auth_password)(const char *, const char *, void *);
    char *(*auth_interactive)(const char *, const char *, const char *, int, void *);
    char *(*auth_privkey_passphrase)(const char *, void *);

    /* private data for the callbacks */
    void *auth_hostkey_check_priv;
    void *auth_password_priv;
    void *auth_interactive_priv;
    void *auth_privkey_passphrase_priv;

    char *username;
};

/**
 * @brief A basic certificate.
 */
struct nc_certificate {
    char *name;         /**< Arbitrary name of the certificate. */
    char *cert_base64;  /**< Base-64 encoded certificate. */
};

struct nc_certificate_bag {
    char *name;
    struct nc_certificate *certs;
    uint16_t cert_count;
};

/**
 * @brief An asymmetric key.
 */
struct nc_asymmetric_key {
    char *name;                     /**< Arbitrary name of the key. */

    NC_SSH_PUBKEY_TYPE pubkey_type; /**< Type of the public key. */
    char *pub_base64;               /**< Base-64 encoded public key. */
    NC_SSH_KEY_TYPE privkey_type;   /**< Type of the private key. */
    char *priv_base64;              /**< Base-64 encoded private key. */

    struct nc_certificate *certs;   /**< The certificates associated with this key. */
    uint16_t cert_count;            /**< Number of certificates associated with this key. */
};

/**
 * @brief A symmetric key.
 */
struct nc_symmetric_key {
    char *name;     /**< Arbitrary name of the key. */
    char *base64;   /**< Base-64 encoded key. */
};

/**
 * @brief A public key.
 */
struct nc_public_key {
    char *name;                     /**< Arbitrary name of the public key. */
    NC_SSH_PUBKEY_TYPE pubkey_type; /**< Type of the public key. */
    char *pub_base64;               /**< Base-64 encoded public key. */
};

struct nc_public_key_bag {
    char *name;
    struct nc_public_key *pubkeys;
    uint16_t pubkey_count;
};

struct nc_truststore {
    struct nc_certificate_bag *cert_bags;
    uint16_t cert_bag_count;

    struct nc_public_key_bag *pub_bags;
    uint16_t pub_bag_count;
};

/**
 * @brief Keystore YANG module representation.
 */
struct nc_keystore {
    struct nc_asymmetric_key *asym_keys;    /**< Stored asymmetric keys. */
    uint16_t asym_key_count;                /**< Count of stored asymmetric keys. */

    struct nc_symmetric_key *sym_keys;      /**< Stored symmetric keys. */
    uint16_t sym_key_count;                 /**< Count of stored symmetric keys. */
};

/**
 * @brief Tracks the state of a client's authentication.
 */
struct nc_auth_state {
    int auth_method_count;  /**< The number of auth. methods that the user supports. */
    int auth_success_count; /**< The number of auth. methods that ended successfully. */
};

/**
 * @brief A server's authorized client.
 */
struct nc_client_auth {
    char *username;                         /**< Arbitrary username. */

    NC_STORE_TYPE ks_type;                  /**< Specifies how/where the client's public key is stored. */
    union {
        struct {
            struct nc_public_key *pubkeys;  /**< The client's public keys. */
            uint16_t pubkey_count;          /**< The number of client's public keys. */
        };
        struct nc_public_key_bag *ts_ref;                 /**< Reference to a truststore. */
    };

    char *password;                         /**< Client's password */
    char *pam_config_name;                  /**< Client's PAM configuration file name. */
    char *pam_config_dir;                   /**< Client's PAM configuration file directory. */
    int supports_none;                      /**< Implies that the client supports the none authentication method. */
};

/**
 * @brief The server's hostkey.
 */
struct nc_hostkey {
    char *name;                             /**<  Arbitrary name of the host key. */

    NC_STORE_TYPE ks_type;                  /**< Specifies how/where the key is stored. */
    union {
        struct nc_asymmetric_key key;       /**< The server's hostkey. */
        struct nc_asymmetric_key *ks_ref;   /**< Reference to a key-store. */
    };
};

/**
 * @brief Server options for configuring the SSH transport protocol.
 */
struct nc_server_ssh_opts {
    struct nc_hostkey *hostkeys;            /**< Server's hostkeys. */
    uint16_t hostkey_count;                 /**< Number of server's hostkeys. */

    struct nc_client_auth *auth_clients;    /**< Server's authorized clients. */
    uint16_t client_count;                  /**< Number of server's authorized clients. */

    char *hostkey_algs;                     /**< Hostkey algorithms supported by the server. */
    char *encryption_algs;                  /**< Encryption algorithms supported by the server. */
    char *kex_algs;                         /**< Key exchange algorithms supported by the server. */
    char *mac_algs;                         /**< MAC algorithms supported by the server. */

    uint16_t auth_attempts;                 /**< Number of allowed authentication attempts. */
    uint16_t auth_timeout;                  /**< Authentication timeout. */
};

#endif /* NC_ENABLED_SSH */

#ifdef NC_ENABLED_TLS

# include <openssl/bio.h>
# include <openssl/ssl.h>

/* ACCESS unlocked */
struct nc_client_tls_opts {
    char *cert_path;
    char *key_path;
    char *ca_file;
    char *ca_dir;
    int8_t tls_ctx_change;
    SSL_CTX *tls_ctx;

    char *crl_file;
    char *crl_dir;
    int8_t crl_store_change;
    X509_STORE *crl_store;
};

/* ACCESS locked, separate locks */
struct nc_server_tls_opts {
    char *server_cert;
    char **trusted_cert_lists;
    uint16_t trusted_cert_list_count;
    char *trusted_ca_file;
    char *trusted_ca_dir;
    X509_STORE *crl_store;

    struct nc_ctn {
        uint32_t id;
        char *fingerprint;
        NC_TLS_CTN_MAPTYPE map_type;
        char *name;
        struct nc_ctn *next;
    } *ctn;
};

#endif /* NC_ENABLED_TLS */

/**
 * @brief Keepalives configuration data.
 */
struct nc_keepalives {
    int enabled;                /**< Indicates that keepalives are enabled. */
    uint16_t idle_time;         /**< Idle timeout. */
    uint16_t max_probes;        /**< Maximum number of probes. */
    uint16_t probe_interval;    /**< Probe interval. */
};

/**
 * @brief UNIX socket connection configuration.
 */
struct nc_server_unix_opts {
    char *address;  /**< Address of the socket. */
    mode_t mode;    /**< Socket's mode. */
    uid_t uid;      /**< Socket's uid. */
    gid_t gid;      /**< Socket's gid. */
};

/**
 * @brief Stores information about a bind.
 */
struct nc_bind {
    char *address;  /**< Bind's address. */
    uint16_t port;  /**< Bind's port. */
    int sock;       /**< Bind's socket. */
    int pollin;     /**< Specifies, which sockets to poll on. */
};

/* ACCESS unlocked */
struct nc_client_opts {
    char *schema_searchpath;
    int auto_context_fill_disabled;
    ly_module_imp_clb schema_clb;
    void *schema_clb_data;
    struct nc_keepalives ka;

    struct nc_bind *ch_binds;

    struct {
        NC_TRANSPORT_IMPL ti;
        char *hostname;
    } *ch_binds_aux;
    uint16_t ch_bind_count;
};

/* ACCESS unlocked */
struct nc_client_context {
    unsigned int refcount;
    struct nc_client_opts opts;

#ifdef NC_ENABLED_SSH
    struct nc_client_ssh_opts ssh_opts;
    struct nc_client_ssh_opts ssh_ch_opts;
#endif /* NC_ENABLED_SSH */
#ifdef NC_ENABLED_TLS
    struct nc_client_tls_opts tls_opts;
    struct nc_client_tls_opts tls_ch_opts;
#endif /* NC_ENABLED_TLS */
};

struct nc_server_opts {
    /* ACCESS unlocked */
    ATOMIC_T wd_basic_mode;
    ATOMIC_T wd_also_supported;
    uint32_t capabilities_count;
    char **capabilities;

    char *(*content_id_clb)(void *user_data);
    void *content_id_data;

    void (*content_id_data_free)(void *data);

    /* ACCESS unlocked */
    ATOMIC_T hello_timeout;
    ATOMIC_T idle_timeout;

#ifdef NC_ENABLED_SSH
    int (*passwd_auth_clb)(const struct nc_session *session, const char *password, void *user_data);
    void *passwd_auth_data;
    void (*passwd_auth_data_free)(void *data);

    int (*pubkey_auth_clb)(const struct nc_session *session, ssh_key key, void *user_data);
    void *pubkey_auth_data;
    void (*pubkey_auth_data_free)(void *data);

    int (*interactive_auth_sess_clb)(const struct nc_session *session, ssh_session ssh_sess, ssh_message msg, void *user_data);
    void *interactive_auth_sess_data;
    void (*interactive_auth_sess_data_free)(void *data);

    int (*interactive_auth_clb)(const struct nc_session *session, ssh_message msg, void *user_data);
    void *interactive_auth_data;
    void (*interactive_auth_data_free)(void *data);
#endif
#ifdef NC_ENABLED_TLS
    int (*user_verify_clb)(const struct nc_session *session);

    int (*server_cert_clb)(const char *name, void *user_data, char **cert_path, char **cert_data, char **privkey_path,
            char **privkey_data, NC_SSH_KEY_TYPE *privkey_type);
    void *server_cert_data;
    void (*server_cert_data_free)(void *data);

    int (*server_cert_chain_clb)(const char *name, void *user_data, char ***cert_paths, int *cert_path_count,
            char ***cert_data, int *cert_data_count);
    void *server_cert_chain_data;
    void (*server_cert_chain_data_free)(void *data);

    int (*trusted_cert_list_clb)(const char *name, void *user_data, char ***cert_paths, int *cert_path_count,
            char ***cert_data, int *cert_data_count);
    void *trusted_cert_list_data;
    void (*trusted_cert_list_data_free)(void *data);
#endif

    pthread_rwlock_t config_lock;
    struct nc_keystore keystore; /**< store for server's keys/certificates */
    struct nc_truststore truststore;    /**< store for server client's keys/certificates */

    struct nc_bind *binds;
    struct nc_endpt {
        char *name;
        int changed;
        NC_TRANSPORT_IMPL ti;
        struct nc_keepalives ka;

        union {
#ifdef NC_ENABLED_SSH
            struct nc_server_ssh_opts *ssh;
#endif
#ifdef NC_ENABLED_TLS
            struct nc_server_tls_opts *tls;
#endif
            struct nc_server_unix_opts *unixsock;
        } opts;
    } *endpts;
    uint16_t endpt_count;

    /* ACCESS locked, add/remove CH clients - WRITE lock ch_client_lock
     *                modify CH clients - READ lock ch_client_lock + ch_client_lock */
    struct nc_ch_client {
        char *name;
        struct nc_ch_endpt {
            char *name;
            NC_TRANSPORT_IMPL ti;
            char *address;
            uint16_t port;
            int sock_pending;
            struct nc_keepalives ka;

            union {
#ifdef NC_ENABLED_SSH
                struct nc_server_ssh_opts *ssh;
#endif
#ifdef NC_ENABLED_TLS
                struct nc_server_tls_opts *tls;
#endif
            } opts;
        } *ch_endpts;
        uint16_t ch_endpt_count;
        NC_CH_CONN_TYPE conn_type;

        union {
            struct {
                uint16_t period;
                time_t anchor_time;
                uint16_t idle_timeout;
            } period;
        } conn;
        NC_CH_START_WITH start_with;
        uint8_t max_attempts;
        uint32_t id;
        pthread_mutex_t lock;
    } *ch_clients;
    uint16_t ch_client_count;
    pthread_rwlock_t ch_client_lock;

    /* Atomic IDs */
    ATOMIC_T new_session_id;
    ATOMIC_T new_client_id;
};

/**
 * Sleep time in usec to wait between nc_recv_notif() calls.
 */
#define NC_CLIENT_NOTIF_THREAD_SLEEP 10000

/**
 * Timeout in msec for transport-related data to arrive (ssh_handle_key_exchange(), SSL_accept(), SSL_connect()).
 * It can be quite a lot on slow machines (waiting for TLS cert-to-name resolution, ...).
 */
#define NC_TRANSPORT_TIMEOUT 10000

/**
 * Timeout in msec for acquiring a lock of a session (used with a condition, so higher numbers could be required
 * only in case of extreme concurrency).
 */
#define NC_SESSION_LOCK_TIMEOUT 500

/**
 * Timeout in msec for acquiring a lock of a session that is supposed to be freed.
 */
#define NC_SESSION_FREE_LOCK_TIMEOUT 1000

/**
 * Timeout in msec for a thread to wait for its turn to work with a pollsession structure.
 */
#define NC_PS_QUEUE_TIMEOUT 5000

/**
 * Time slept in msec if no endpoint was created for a running Call Home client.
 */
#define NC_CH_NO_ENDPT_WAIT 1000

/**
 * Timeout in msec for a Call Home socket to establish its connection.
 */
#define NC_CH_CONNECT_TIMEOUT 500

/**
 * Number of sockets kept waiting to be accepted.
 */
#define NC_REVERSE_QUEUE 5

/**
 * @brief Type of the session
 */
typedef enum {
    NC_CLIENT,        /**< client side */
    NC_SERVER         /**< server side */
} NC_SIDE;

/**
 * @brief Enumeration of the supported NETCONF protocol versions
 */
typedef enum {
    NC_VERSION_10 = 0,  /**< NETCONF 1.0 - RFC 4741, 4742 */
    NC_VERSION_11 = 1   /**< NETCONF 1.1 - RFC 6241, 6242 */
} NC_VERSION;

#define NC_VERSION_10_ENDTAG "]]>]]>"
#define NC_VERSION_10_ENDTAG_LEN 6

/**
 * @brief Container to serialize RPC messages
 */
struct nc_msg_cont {
    struct ly_in *msg;
    NC_MSG_TYPE type;         /**< can be either NC_MSG_REPLY or NC_MSG_NOTIF */
    struct nc_msg_cont *next;
};

/**
 * @brief NETCONF session structure
 */
struct nc_session {
    NC_STATUS status;            /**< status of the session */
    NC_SESSION_TERM_REASON term_reason; /**< reason of termination, if status is NC_STATUS_INVALID */
    uint32_t killed_by;          /**< session responsible for termination, if term_reason is NC_SESSION_TERM_KILLED */
    NC_SIDE side;                /**< side of the session: client or server */

    /* NETCONF data */
    uint32_t id;                 /**< NETCONF session ID (session-id-type) */
    NC_VERSION version;          /**< NETCONF protocol version */

    /* Transport implementation */
    NC_TRANSPORT_IMPL ti_type;   /**< transport implementation type to select items from ti union */
    pthread_mutex_t *io_lock;    /**< input/output lock, note that in case of libssh TI, it will be shared with
                                      other NETCONF sessions on the same SSH session (but different SSH channel) */

    union {
        struct {
            int in;              /**< input file descriptor */
            int out;             /**< output file descriptor */
        } fd;                    /**< NC_TI_FD transport implementation structure */
        struct {
            int sock;            /**< socket file descriptor */
        } unixsock;              /**< NC_TI_UNIX transport implementation structure */
#ifdef NC_ENABLED_SSH
        struct {
            ssh_channel channel;
            ssh_session session;
            struct nc_session *next; /**< pointer to the next NETCONF session on the same
                                          SSH session, but different SSH channel. If no such session exists, it is NULL.
                                          otherwise there is a ring list of the NETCONF sessions */
        } libssh;
#endif
#ifdef NC_ENABLED_TLS
        SSL *tls;
#endif
    } ti;                          /**< transport implementation data */
    char *username;
    char *host;
    uint16_t port;
    char *path;                    /**< socket path in case of unix socket */

    /* other */
    struct ly_ctx *ctx;            /**< libyang context of the session */
    void *data;                    /**< arbitrary user data */
    uint8_t flags;                 /**< various flags of the session */
#define NC_SESSION_SHAREDCTX 0x01
#define NC_SESSION_CALLHOME 0x02    /**< session is Call Home and ch_lock is initialized */
#define NC_SESSION_CH_THREAD 0x04   /**< protected by ch_lock */

    union {
        struct {
            /* client side only data */
            uint64_t msgid;
            char **cpblts;                 /**< list of server's capabilities on client side */
            pthread_mutex_t msgs_lock;     /**< lock for the msgs buffer */
            struct nc_msg_cont *msgs;      /**< queue for messages received of different type than expected */
            ATOMIC_T ntf_thread_count;     /**< number of running notification threads */
            ATOMIC_T ntf_thread_running;   /**< flag whether there are notification threads for this session running or not */
            struct lyd_node *ext_data;     /**< LY ext data used in the context callback */

            /* client flags */
            /* some server modules failed to load so the data from them will be ignored - not use strict flag for parsing */
#           define NC_SESSION_CLIENT_NOT_STRICT 0x08
        } client;
        struct {
            /* server side only data */
            time_t session_start;          /**< real time the session was created */
            time_t last_rpc;               /**< monotonic time (seconds) the last RPC was received on this session */

            pthread_mutex_t ntf_status_lock;    /**< lock for ntf_status */
            uint32_t ntf_status;                /**< flag (count) whether the session is subscribed to notifications */

            pthread_mutex_t rpc_lock;    /**< lock indicating RPC processing, this lock is always locked before io_lock!! */
            pthread_cond_t rpc_cond;     /**< RPC condition (tied with rpc_lock and rpc_inuse) */
            int rpc_inuse;               /**< variable indicating whether there is RPC being processed or not (tied with
                                              rpc_cond and rpc_lock) */

            pthread_mutex_t ch_lock;       /**< Call Home thread lock */
            pthread_cond_t ch_cond;        /**< Call Home thread condition */

            /* server flags */
#ifdef NC_ENABLED_SSH
            /* SSH session authenticated */
#           define NC_SESSION_SSH_AUTHENTICATED 0x10
            /* netconf subsystem requested */
#           define NC_SESSION_SSH_SUBSYS_NETCONF 0x20
            uint16_t ssh_auth_attempts;    /**< number of failed SSH authentication attempts */
#endif
#ifdef NC_ENABLED_TLS
            X509 *client_cert;                /**< TLS client certificate if used for authentication */
#endif
        } server;
    } opts;
};

enum nc_ps_session_state {
    NC_PS_STATE_NONE = 0,      /**< session is not being worked with */
    NC_PS_STATE_BUSY,          /**< session is being polled or communicated on (and locked) */
    NC_PS_STATE_INVALID        /**< session is invalid and was already returned by another poll */
};

struct nc_ps_session {
    struct nc_session *session;
    enum nc_ps_session_state state;
};

/* ACCESS locked */
struct nc_pollsession {
    struct nc_ps_session **sessions;
    uint16_t session_count;
    uint16_t last_event_session;

    pthread_cond_t cond;
    pthread_mutex_t lock;
    uint8_t queue[NC_PS_QUEUE_SIZE]; /**< round buffer, queue is empty when queue_len == 0 */
    uint8_t queue_begin;             /**< queue starts on queue[queue_begin] */
    uint8_t queue_len;               /**< queue ends on queue[(queue_begin + queue_len - 1) % NC_PS_QUEUE_SIZE] */
};

struct nc_ntf_thread_arg {
    struct nc_session *session;
    nc_notif_dispatch_clb notif_clb;
    void *user_data;

    void (*free_data)(void *);
};

#ifdef NC_ENABLED_SSH

/**
 * @brief PAM callback arguments.
 */
struct nc_pam_thread_arg {
    ssh_message msg;            /**< libssh message */
    struct nc_session *session; /**< NETCONF session */
    struct nc_server_ssh_opts *opts; /**< SSH server opts */
};

#endif

void *nc_realloc(void *ptr, size_t size);

struct passwd *nc_getpwuid(uid_t uid, struct passwd *pwd_buf, char **buf, size_t *buf_size);

NC_MSG_TYPE nc_send_msg_io(struct nc_session *session, int io_timeout, struct lyd_node *op);

/**
 * @brief Get current clock (uses COMPAT_CLOCK_ID) time with an offset.
 *
 * @param[out] ts Current time offset by @p add_ms.
 * @param[in] add_ms Number of milliseconds to add.
 */
void nc_timeouttime_get(struct timespec *ts, uint32_t add_ms);

/**
 * @brief Get time difference based on the current time (uses COMPAT_CLOCK_ID).
 *
 * @param[in] ts Timespec structure holding real time from which the current time is going to be subtracted.
 * @return Time difference in milliseconds.
 */
int32_t nc_timeouttime_cur_diff(const struct timespec *ts);

/**
 * @brief Get current CLOCK_REALTIME time.
 *
 * @param[out] ts Current real time.
 */
void nc_realtime_get(struct timespec *ts);

const char *nc_keytype2str(NC_SSH_KEY_TYPE type);

int nc_sock_configure_keepalive(int sock, struct nc_keepalives *ka);

struct nc_session *nc_new_session(NC_SIDE side, int shared_ti);

int nc_session_rpc_lock(struct nc_session *session, int timeout, const char *func);

int nc_session_rpc_unlock(struct nc_session *session, int timeout, const char *func);

/**
 * @brief Lock IO lock on a session.
 *
 * @param[in] session Session to lock.
 * @param[in] timeout Timeout in msec to use.
 * @param[in] func Caller function for logging.
 * @return 1 on success;
 * @return 0 on timeout;
 * @return -1 on error.
 */
int nc_session_io_lock(struct nc_session *session, int timeout, const char *func);

/**
 * @brief Unlock IO lock on a session.
 *
 * @param[in] session Session to unlock.
 * @param[in] func Caller function for logging.
 * @return 1 on success;
 * @return -1 on error.
 */
int nc_session_io_unlock(struct nc_session *session, const char *func);

/**
 * @brief Lock MSGS lock on a session.
 *
 * @param[in] session Session to lock.
 * @param[in,out] timeout Timeout in msec to use. If positive and on successful lock, is updated based on what was elapsed.
 * @param[in] func Caller function for logging.
 * @return 1 on success;
 * @return 0 on timeout;
 * @return -1 on error.
 */
int nc_session_client_msgs_lock(struct nc_session *session, int *timeout, const char *func);

/**
 * @brief Unlock MSGS lock on a session.
 *
 * @param[in] session Session to unlock.
 * @param[in] func Caller function for logging.
 * @return 1 on success;
 * @return -1 on error.
 */
int nc_session_client_msgs_unlock(struct nc_session *session, const char *func);

int nc_ps_lock(struct nc_pollsession *ps, uint8_t *id, const char *func);

int nc_ps_unlock(struct nc_pollsession *ps, uint8_t id, const char *func);

int nc_client_session_new_ctx(struct nc_session *session, struct ly_ctx *ctx);

/**
 * @brief Fill libyang context in @p session. Context models are based on the stored session
 *        capabilities. If the server does not support \<get-schema\>, the models are searched
 *        for in the directory set using nc_client_schema_searchpath().
 *
 * @param[in] session Session to create the context for.
 * @return 0 on success, 1 on some missing schemas, -1 on error.
 */
int nc_ctx_check_and_fill(struct nc_session *session);

/**
 * @brief Perform NETCONF handshake on @p session.
 *
 * @param[in] session NETCONF session to use.
 * @return NC_MSG_HELLO on success, NC_MSG_BAD_HELLO on client \<hello\> message parsing fail
 * (server-side only), NC_MSG_WOULDBLOCK on timeout, NC_MSG_ERROR on other error.
 */
NC_MSG_TYPE nc_handshake_io(struct nc_session *session);

/**
 * @brief Create a socket connection.
 *
 * @param[in] host Hostname to connect to.
 * @param[in] port Port to connect on.
 * @param[in] timeout_ms Timeout in ms for blocking the connect + select call (-1 for infinite).
 * @param[in] ka Keepalives parameters.
 * @param[in,out] sock_pending Previous pending socket. If set, equal to -1, and the connection is still in progress
 * after @p timeout, it is set to the pending socket but -1 is returned. If NULL, the socket is closed on timeout.
 * @param[out] ip_host Optional parameter with string IP address of the connected host.
 * @return Connected socket or -1 on error.
 */
int nc_sock_connect(const char *host, uint16_t port, int timeout_ms, struct nc_keepalives *ka, int *sock_pending,
        char **ip_host);

/**
 * @brief Accept a new socket connection.
 *
 * @param[in] sock Listening socket.
 * @param[in] timeout Timeout in milliseconds.
 * @param[out] peer_host Host the new connection was initiated from. Can be NULL.
 * @param[out] peer_port Port the new connection is connected on. Can be NULL.
 * @return Connected socket with the new connection, -1 on error.
 */
int nc_sock_accept(int sock, int timeout, char **peer_host, uint16_t *peer_port);

/**
 * @brief Create a listening socket (AF_INET or AF_INET6).
 *
 * @param[in] address IP address to listen on.
 * @param[in] port Port to listen on.
 * @param[in] ka Keepalives parameters.
 * @return Listening socket, -1 on error.
 */
int nc_sock_listen_inet(const char *address, uint16_t port, struct nc_keepalives *ka);

/**
 * @brief Create a listening socket (AF_UNIX).
 *
 * @param[in] opts The server options (unix permissions and address of the socket).
 * @return Listening socket, -1 on error.
 */
int nc_sock_listen_unix(const struct nc_server_unix_opts *opts);

/**
 * @brief Accept a new connection on a listening socket.
 *
 * @param[in] binds Structure with the listening sockets.
 * @param[in] bind_count Number of @p binds.
 * @param[in] timeout Timeout for accepting.
 * @param[out] host Host of the remote peer. Can be NULL.
 * @param[out] port Port of the new connection. Can be NULL.
 * @param[out] idx Index of the bind that was accepted. Can be NULL.
 * @return Accepted socket of the new connection, -1 on error.
 */
int nc_sock_accept_binds(struct nc_bind *binds, uint16_t bind_count, int timeout, char **host, uint16_t *port, uint16_t *idx);

/**
 * @brief Lock endpoint structures for reading and the specific endpoint.
 *
 * @param[in] name Name of the endpoint.
 * @param[in] ti Expected transport.
 * @param[out] idx Index of the endpoint. Optional.
 * @return Endpoint structure.
 */
struct nc_endpt *nc_server_endpt_lock_get(const char *name, NC_TRANSPORT_IMPL ti, uint16_t *idx);

/**
 * @brief Lock CH client structures for reading and lock the specific client.
 *
 * @param[in] name Name of the CH client.
 * @param[in] endpt_name Endpoint of the CH client.
 * @param[in] ti Expected transport.
 * @param[out] client_p Pointer to the CH client.
 * @return CH endpoint structure.
 */
struct nc_ch_endpt *nc_server_ch_client_lock(const char *name, const char *endpt_name, NC_TRANSPORT_IMPL ti,
        struct nc_ch_client **client_p);

/**
 * @brief Unlock CH client strcutures and the specific client.
 *
 * @param[in] endpt Locked CH client structure.
 */
void nc_server_ch_client_unlock(struct nc_ch_client *client);

/**
 * @brief Add a client Call Home bind, listen on it.
 *
 * @param[in] address Address to bind to.
 * @param[in] port Port to bind to.
 * @param[in] hostname Expected server hostname, may be NULL.
 * @param[in] ti Transport to use.
 * @return 0 on success, -1 on error.
 */
int nc_client_ch_add_bind_listen(const char *address, uint16_t port, const char *hostname, NC_TRANSPORT_IMPL ti);

/**
 * @brief Remove a client Call Home bind, stop listening on it.
 *
 * @param[in] address Address of the bind. NULL matches any address.
 * @param[in] port Port of the bind. 0 matches all ports.
 * @param[in] ti Transport of the bind. 0 matches all transports.
 * @return 0 on success, -1 on no matches found.
 */
int nc_client_ch_del_bind(const char *address, uint16_t port, NC_TRANSPORT_IMPL ti);

/**
 * @brief Connect to a listening NETCONF client using Call Home.
 *
 * @param[in] host Hostname to connect to.
 * @param[in] port Port to connect to.
 * @param[in] ti Transport fo the connection.
 * @param[out] session New Call Home session.
 * @return NC_MSG_HELLO on success, NC_MSG_BAD_HELLO on client \<hello\> message
 *         parsing fail, NC_MSG_WOULDBLOCK on timeout, NC_MSG_ERROR on other errors.
 */
NC_MSG_TYPE nc_connect_callhome(const char *host, uint16_t port, NC_TRANSPORT_IMPL ti, struct nc_session **session);

void nc_init(void);

void nc_destroy(void);

#ifdef NC_ENABLED_SSH

/**
 * @brief Accept a server Call Home connection on a socket.
 *
 * @param[in] sock Socket with a new connection.
 * @param[in] host Hostname of the server.
 * @param[in] port Port of the server.
 * @param[in] ctx Context for the session. Can be NULL.
 * @param[in] timeout Transport operations timeout in msec.
 * @return New session, NULL on error.
 */
struct nc_session *nc_accept_callhome_ssh_sock(int sock, const char *host, uint16_t port, struct ly_ctx *ctx, int timeout);

/**
 * @brief Establish SSH transport on a socket.
 *
 * @param[in] session Session structure of the new connection.
 * @param[in] sock Socket of the new connection.
 * @param[in] timeout Transport operations timeout in msec (not SSH authentication one).
 * @return 1 on success, 0 on timeout, -1 on error.
 */
int nc_accept_ssh_session(struct nc_session *session, struct nc_server_ssh_opts *opts, int sock, int timeout);

/**
 * @brief Process a SSH message.
 *
 * @param[in] session Session structure of the connection.
 * @param[in] opts Endpoint SSH options on which the session was created.
 * @param[in] msg SSH message itself.
 * @param[in] state State of the authentication.
 * @return 0 if the message was handled, 1 if it is left up to libssh.
 */
int nc_session_ssh_msg(struct nc_session *session, struct nc_server_ssh_opts *opts, ssh_message msg, struct nc_auth_state *state);

void nc_server_ssh_clear_opts(struct nc_server_ssh_opts *opts);

void nc_client_ssh_destroy_opts(void);
void _nc_client_ssh_destroy_opts(struct nc_client_ssh_opts *opts);

#endif /* NC_ENABLED_SSH */

#ifdef NC_ENABLED_TLS

struct nc_session *nc_accept_callhome_tls_sock(int sock, const char *host, uint16_t port, struct ly_ctx *ctx,
        int timeout, const char *peername);

/**
 * @brief Establish TLS transport on a socket.
 *
 * @param[in] session Session structure of the new connection.
 * @param[in] sock Socket of the new connection.
 * @param[in] timeout Transport operations timeout in msec.
 * @return 1 on success, 0 on timeout, -1 on error.
 */
int nc_accept_tls_session(struct nc_session *session, int sock, int timeout);

void nc_server_tls_clear_opts(struct nc_server_tls_opts *opts);

void nc_client_tls_destroy_opts(void);
void _nc_client_tls_destroy_opts(struct nc_client_tls_opts *opts);

#endif /* NC_ENABLED_TLS */

/**
 * Functions
 * - io.c
 */

/**
 * @brief Read message from the wire.
 *
 * Accepts hello, rpc, rpc-reply and notification. Received string is transformed into
 * libyang XML tree and the message type is detected from the top level element.
 *
 * @param[in] session NETCONF session from which the message is being read.
 * @param[in] io_timeout Timeout in milliseconds. Negative value means infinite timeout,
 *            zero value causes to return immediately.
 * @param[out] msg Input handled with the NETCONF message (application layer data).
 * @return 1 on success.
 * @return 0 on timeout.
 * @return -1 on error.
 * @return -2 on malformed message error.
 */
int nc_read_msg_poll_io(struct nc_session *session, int io_timeout, struct ly_in **msg);

/**
 * @brief Read a message from the wire.
 *
 * @param[in] session NETCONF session from which the message is being read.
 * @param[in] io_timeout Timeout in milliseconds. Negative value means infinite timeout,
 *            zero value causes to return immediately.
 * @param[out] msg Input handled with the NETCONF message (application layer data).
 * @param[in] passing_io_lock True if @p session IO lock is already held. This function always unlocks
 *            it before returning!
 * @return 1 on success.
 * @return 0 on timeout.
 * @return -1 on error.
 * @return -2 on malformed message error.
 */
int nc_read_msg_io(struct nc_session *session, int io_timeout, struct ly_in **msg, int passing_io_lock);

/**
 * @brief Write message into wire.
 *
 * @param[in] session NETCONF session to which the message will be written.
 * @param[in] io_timeout Timeout in milliseconds. Negative value means infinite timeout,
 *            zero value causes to return immediately.
 * @param[in] type The type of the message to write, specified as #NC_MSG_TYPE value. According to the type, the
 * specific additional parameters are required or accepted:
 * - #NC_MSG_RPC
 *   - `struct lyd_node *op;` - operation (content of the \<rpc/\> to be sent. Required parameter.
 *   - `const char *attrs;` - additional attributes to be added into the \<rpc/\> element. Required parameter.
 * - #NC_MSG_REPLY
 *   - `struct lyd_node_opaq *rpc_envp;` - parsed envelopes of the RPC to reply to. Required parameter.
 *   - `struct nc_server_reply *reply;` - RPC reply. Required parameter.
 * - #NC_MSG_NOTIF
 *   - `struct nc_server_notif *notif;` - notification object. Required parameter.
 * - #NC_MSG_HELLO
 *   - `const char **capabs;` - capabilities array ended with NULL. Required parameter.
 *   - `uint32_t *sid;` - session ID to be included in the hello message. Optional parameter.
 *
 * @return Type of the written message. #NC_MSG_WOULDBLOCK is returned if timeout is positive
 * (or zero) value and IO lock could not be acquired in that time. #NC_MSG_ERROR is
 * returned on error and #NC_MSG_NONE is never returned by this function.
 */
NC_MSG_TYPE nc_write_msg_io(struct nc_session *session, int io_timeout, int type, ...);

/**
 * @brief Check whether a session is still connected (on transport layer).
 *
 * @param[in] session Session to check.
 * @return 1 if connected, 0 if not.
 */
int nc_session_is_connected(struct nc_session *session);

#endif /* NC_SESSION_PRIVATE_H_ */