| # status LED blinking: white, 50% duty cycle, rather fast, but not the fastet blinking |
| i2c dev 1 |
| i2c mw 0x60 0x16 0x00 |
| i2c mw 0x60 0x12 0x80 |
| i2c mw 0x60 0x13 0x06 |
| i2c mw 0x60 0x16 0x3f |
| i2c mw 0x60 0x0a 0x80 |
| i2c mw 0x60 0x0b 0x80 |
| i2c mw 0x60 0x0c 0x80 |
| # reset fan controller |
| i2c mw 0x20 0x00 0x40 |
| setenv bootargs root=/dev/mmcblk0p${rauc_part} init=/sbin/init-czechlight.sh rauc.slot=${rauc_slot} czechlight=${czechlight} systemd.machine_id=${machineid} panic=10 oops=panic spidev.bufsiz=131072 schedstats=enable |
| if test -n ${czechlight} && load mmc 0:${rauc_part} ${fdt_addr_r} /boot/${czechlight}-clearfog.dtb; then |
| echo "DTS: ${czechlight}-clearfog" |
| else |
| load mmc 0:${rauc_part} ${fdt_addr_r} /boot/czechlight-clearfog.dtb || reset |
| fi |
| load mmc 0:${rauc_part} ${kernel_addr_r} /boot/zImage || reset |
| bootz ${kernel_addr_r} - ${fdt_addr_r} || reset |